| /* | |
| USB Driver for Sierra Wireless | |
| Copyright (C) 2006, 2007, 2008 Kevin Lloyd <klloyd@sierrawireless.com> | |
| IMPORTANT DISCLAIMER: This driver is not commercially supported by | |
| Sierra Wireless. Use at your own risk. | |
| This driver is free software; you can redistribute it and/or modify | |
| it under the terms of Version 2 of the GNU General Public License as | |
| published by the Free Software Foundation. | |
| Portions based on the option driver by Matthias Urlichs <smurf@smurf.noris.de> | |
| Whom based his on the Keyspan driver by Hugh Blemings <hugh@blemings.org> | |
| */ | |
| #define DRIVER_VERSION "v.1.2.9c" | |
| #define DRIVER_AUTHOR "Kevin Lloyd <klloyd@sierrawireless.com>" | |
| #define DRIVER_DESC "USB Driver for Sierra Wireless USB modems" | |
| #include <linux/kernel.h> | |
| #include <linux/jiffies.h> | |
| #include <linux/errno.h> | |
| #include <linux/tty.h> | |
| #include <linux/tty_flip.h> | |
| #include <linux/module.h> | |
| #include <linux/usb.h> | |
| #include <linux/usb/serial.h> | |
| #include <linux/usb/ch9.h> | |
| #define SWIMS_USB_REQUEST_SetPower 0x00 | |
| #define SWIMS_USB_REQUEST_SetNmea 0x07 | |
| #define SWIMS_USB_REQUEST_SetMode 0x0B | |
| #define SWIMS_SET_MODE_Modem 0x0001 | |
| /* per port private data */ | |
| #define N_IN_URB 4 | |
| #define N_OUT_URB 4 | |
| #define IN_BUFLEN 4096 | |
| static int debug; | |
| static int nmea; | |
| static int truinstall = 1; | |
| enum devicetype { | |
| DEVICE_3_PORT = 0, | |
| DEVICE_1_PORT = 1, | |
| DEVICE_INSTALLER = 2, | |
| }; | |
| static int sierra_set_power_state(struct usb_device *udev, __u16 swiState) | |
| { | |
| int result; | |
| dev_dbg(&udev->dev, "%s", "SET POWER STATE\n"); | |
| result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), | |
| SWIMS_USB_REQUEST_SetPower, /* __u8 request */ | |
| USB_TYPE_VENDOR, /* __u8 request type */ | |
| swiState, /* __u16 value */ | |
| 0, /* __u16 index */ | |
| NULL, /* void *data */ | |
| 0, /* __u16 size */ | |
| USB_CTRL_SET_TIMEOUT); /* int timeout */ | |
| return result; | |
| } | |
| static int sierra_set_ms_mode(struct usb_device *udev, __u16 eSWocMode) | |
| { | |
| int result; | |
| dev_dbg(&udev->dev, "%s", "DEVICE MODE SWITCH\n"); | |
| result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), | |
| SWIMS_USB_REQUEST_SetMode, /* __u8 request */ | |
| USB_TYPE_VENDOR, /* __u8 request type */ | |
| eSWocMode, /* __u16 value */ | |
| 0x0000, /* __u16 index */ | |
| NULL, /* void *data */ | |
| 0, /* __u16 size */ | |
| USB_CTRL_SET_TIMEOUT); /* int timeout */ | |
| return result; | |
| } | |
| static int sierra_vsc_set_nmea(struct usb_device *udev, __u16 enable) | |
| { | |
| int result; | |
| dev_dbg(&udev->dev, "%s", "NMEA Enable sent\n"); | |
| result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), | |
| SWIMS_USB_REQUEST_SetNmea, /* __u8 request */ | |
| USB_TYPE_VENDOR, /* __u8 request type */ | |
| enable, /* __u16 value */ | |
| 0x0000, /* __u16 index */ | |
| NULL, /* void *data */ | |
| 0, /* __u16 size */ | |
| USB_CTRL_SET_TIMEOUT); /* int timeout */ | |
| return result; | |
| } | |
| static int sierra_calc_num_ports(struct usb_serial *serial) | |
| { | |
| int result; | |
| int *num_ports = usb_get_serial_data(serial); | |
| result = *num_ports; | |
| if (result) { | |
| kfree(num_ports); | |
| usb_set_serial_data(serial, NULL); | |
| } | |
| return result; | |
| } | |
| static int sierra_calc_interface(struct usb_serial *serial) | |
| { | |
| int interface; | |
| struct usb_interface *p_interface; | |
| struct usb_host_interface *p_host_interface; | |
| /* Get the interface structure pointer from the serial struct */ | |
| p_interface = serial->interface; | |
| /* Get a pointer to the host interface structure */ | |
| p_host_interface = p_interface->cur_altsetting; | |
| /* read the interface descriptor for this active altsetting | |
| * to find out the interface number we are on | |
| */ | |
| interface = p_host_interface->desc.bInterfaceNumber; | |
| return interface; | |
| } | |
| static int sierra_probe(struct usb_serial *serial, | |
| const struct usb_device_id *id) | |
| { | |
| int result = 0; | |
| struct usb_device *udev; | |
| int *num_ports; | |
| u8 ifnum; | |
| num_ports = kmalloc(sizeof(*num_ports), GFP_KERNEL); | |
| if (!num_ports) | |
| return -ENOMEM; | |
| ifnum = serial->interface->cur_altsetting->desc.bInterfaceNumber; | |
| udev = serial->dev; | |
| /* Figure out the interface number from the serial structure */ | |
| ifnum = sierra_calc_interface(serial); | |
| /* | |
| * If this interface supports more than 1 alternate | |
| * select the 2nd one | |
| */ | |
| if (serial->interface->num_altsetting == 2) { | |
| dev_dbg(&udev->dev, | |
| "Selecting alt setting for interface %d\n", | |
| ifnum); | |
| /* We know the alternate setting is 1 for the MC8785 */ | |
| usb_set_interface(udev, ifnum, 1); | |
| } | |
| /* Check if in installer mode */ | |
| if (truinstall && id->driver_info == DEVICE_INSTALLER) { | |
| dev_dbg(&udev->dev, "%s", "FOUND TRU-INSTALL DEVICE(SW)\n"); | |
| result = sierra_set_ms_mode(udev, SWIMS_SET_MODE_Modem); | |
| /* Don't bind to the device when in installer mode */ | |
| kfree(num_ports); | |
| return -EIO; | |
| } else if (id->driver_info == DEVICE_1_PORT) | |
| *num_ports = 1; | |
| else if (ifnum == 0x99) | |
| *num_ports = 0; | |
| else | |
| *num_ports = 3; | |
| /* | |
| * save off our num_ports info so that we can use it in the | |
| * calc_num_ports callback | |
| */ | |
| usb_set_serial_data(serial, (void *)num_ports); | |
| return result; | |
| } | |
| static struct usb_device_id id_table [] = { | |
| { USB_DEVICE(0x1199, 0x0017) }, /* Sierra Wireless EM5625 */ | |
| { USB_DEVICE(0x1199, 0x0018) }, /* Sierra Wireless MC5720 */ | |
| { USB_DEVICE(0x1199, 0x0218) }, /* Sierra Wireless MC5720 */ | |
| { USB_DEVICE(0x0f30, 0x1b1d) }, /* Sierra Wireless MC5720 */ | |
| { USB_DEVICE(0x1199, 0x0020) }, /* Sierra Wireless MC5725 */ | |
| { USB_DEVICE(0x1199, 0x0220) }, /* Sierra Wireless MC5725 */ | |
| { USB_DEVICE(0x1199, 0x0019) }, /* Sierra Wireless AirCard 595 */ | |
| { USB_DEVICE(0x1199, 0x0021) }, /* Sierra Wireless AirCard 597E */ | |
| { USB_DEVICE(0x1199, 0x0120) }, /* Sierra Wireless USB Dongle 595U */ | |
| { USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x0023, 0xFF, 0xFF, 0xFF) }, /* Sierra Wireless C597 */ | |
| { USB_DEVICE(0x1199, 0x6802) }, /* Sierra Wireless MC8755 */ | |
| { USB_DEVICE(0x1199, 0x6804) }, /* Sierra Wireless MC8755 */ | |
| { USB_DEVICE(0x1199, 0x6803) }, /* Sierra Wireless MC8765 */ | |
| { USB_DEVICE(0x1199, 0x6812) }, /* Sierra Wireless MC8775 & AC 875U */ | |
| { USB_DEVICE(0x1199, 0x6813) }, /* Sierra Wireless MC8775 (Thinkpad internal) */ | |
| { USB_DEVICE(0x1199, 0x6815) }, /* Sierra Wireless MC8775 */ | |
| { USB_DEVICE(0x03f0, 0x1e1d) }, /* HP hs2300 a.k.a MC8775 */ | |
| { USB_DEVICE(0x1199, 0x6820) }, /* Sierra Wireless AirCard 875 */ | |
| { USB_DEVICE(0x1199, 0x6821) }, /* Sierra Wireless AirCard 875U */ | |
| { USB_DEVICE(0x1199, 0x6832) }, /* Sierra Wireless MC8780*/ | |
| { USB_DEVICE(0x1199, 0x6833) }, /* Sierra Wireless MC8781*/ | |
| { USB_DEVICE(0x1199, 0x683B), .driver_info = DEVICE_1_PORT }, /* Sierra Wireless MC8785 Composite*/ | |
| { USB_DEVICE(0x1199, 0x6850) }, /* Sierra Wireless AirCard 880 */ | |
| { USB_DEVICE(0x1199, 0x6851) }, /* Sierra Wireless AirCard 881 */ | |
| { USB_DEVICE(0x1199, 0x6852) }, /* Sierra Wireless AirCard 880 E */ | |
| { USB_DEVICE(0x1199, 0x6853) }, /* Sierra Wireless AirCard 881 E */ | |
| { USB_DEVICE(0x1199, 0x6855) }, /* Sierra Wireless AirCard 880 U */ | |
| { USB_DEVICE(0x1199, 0x6856) }, /* Sierra Wireless AirCard 881 U */ | |
| { USB_DEVICE(0x1199, 0x6859), .driver_info = DEVICE_1_PORT }, /* Sierra Wireless AirCard 885 E */ | |
| { USB_DEVICE(0x1199, 0x685A), .driver_info = DEVICE_1_PORT }, /* Sierra Wireless AirCard 885 E */ | |
| { USB_DEVICE(0x1199, 0x6468) }, /* Sierra Wireless MP3G - EVDO */ | |
| { USB_DEVICE(0x1199, 0x6469) }, /* Sierra Wireless MP3G - UMTS/HSPA */ | |
| { USB_DEVICE(0x1199, 0x0112), .driver_info = DEVICE_1_PORT }, /* Sierra Wireless AirCard 580 */ | |
| { USB_DEVICE(0x0F3D, 0x0112), .driver_info = DEVICE_1_PORT }, /* Airprime/Sierra PC 5220 */ | |
| { USB_DEVICE(0x1199, 0x0FFF), .driver_info = DEVICE_INSTALLER}, | |
| { } | |
| }; | |
| MODULE_DEVICE_TABLE(usb, id_table); | |
| static struct usb_driver sierra_driver = { | |
| .name = "sierra", | |
| .probe = usb_serial_probe, | |
| .disconnect = usb_serial_disconnect, | |
| .id_table = id_table, | |
| .no_dynamic_id = 1, | |
| }; | |
| struct sierra_port_private { | |
| spinlock_t lock; /* lock the structure */ | |
| int outstanding_urbs; /* number of out urbs in flight */ | |
| /* Input endpoints and buffers for this port */ | |
| struct urb *in_urbs[N_IN_URB]; | |
| char *in_buffer[N_IN_URB]; | |
| /* Settings for the port */ | |
| int rts_state; /* Handshaking pins (outputs) */ | |
| int dtr_state; | |
| int cts_state; /* Handshaking pins (inputs) */ | |
| int dsr_state; | |
| int dcd_state; | |
| int ri_state; | |
| }; | |
| static int sierra_send_setup(struct usb_serial_port *port) | |
| { | |
| struct usb_serial *serial = port->serial; | |
| struct sierra_port_private *portdata; | |
| __u16 interface = 0; | |
| dbg("%s", __func__); | |
| portdata = usb_get_serial_port_data(port); | |
| if (port->tty) { | |
| int val = 0; | |
| if (portdata->dtr_state) | |
| val |= 0x01; | |
| if (portdata->rts_state) | |
| val |= 0x02; | |
| /* Determine which port is targeted */ | |
| if (port->bulk_out_endpointAddress == 2) | |
| interface = 0; | |
| else if (port->bulk_out_endpointAddress == 4) | |
| interface = 1; | |
| else if (port->bulk_out_endpointAddress == 5) | |
| interface = 2; | |
| return usb_control_msg(serial->dev, | |
| usb_rcvctrlpipe(serial->dev, 0), | |
| 0x22, 0x21, val, interface, | |
| NULL, 0, USB_CTRL_SET_TIMEOUT); | |
| } | |
| return 0; | |
| } | |
| static void sierra_rx_throttle(struct usb_serial_port *port) | |
| { | |
| dbg("%s", __func__); | |
| } | |
| static void sierra_rx_unthrottle(struct usb_serial_port *port) | |
| { | |
| dbg("%s", __func__); | |
| } | |
| static void sierra_break_ctl(struct usb_serial_port *port, int break_state) | |
| { | |
| /* Unfortunately, I don't know how to send a break */ | |
| dbg("%s", __func__); | |
| } | |
| static void sierra_set_termios(struct usb_serial_port *port, | |
| struct ktermios *old_termios) | |
| { | |
| dbg("%s", __func__); | |
| tty_termios_copy_hw(port->tty->termios, old_termios); | |
| sierra_send_setup(port); | |
| } | |
| static int sierra_tiocmget(struct usb_serial_port *port, struct file *file) | |
| { | |
| unsigned int value; | |
| struct sierra_port_private *portdata; | |
| portdata = usb_get_serial_port_data(port); | |
| value = ((portdata->rts_state) ? TIOCM_RTS : 0) | | |
| ((portdata->dtr_state) ? TIOCM_DTR : 0) | | |
| ((portdata->cts_state) ? TIOCM_CTS : 0) | | |
| ((portdata->dsr_state) ? TIOCM_DSR : 0) | | |
| ((portdata->dcd_state) ? TIOCM_CAR : 0) | | |
| ((portdata->ri_state) ? TIOCM_RNG : 0); | |
| return value; | |
| } | |
| static int sierra_tiocmset(struct usb_serial_port *port, struct file *file, | |
| unsigned int set, unsigned int clear) | |
| { | |
| struct sierra_port_private *portdata; | |
| portdata = usb_get_serial_port_data(port); | |
| if (set & TIOCM_RTS) | |
| portdata->rts_state = 1; | |
| if (set & TIOCM_DTR) | |
| portdata->dtr_state = 1; | |
| if (clear & TIOCM_RTS) | |
| portdata->rts_state = 0; | |
| if (clear & TIOCM_DTR) | |
| portdata->dtr_state = 0; | |
| return sierra_send_setup(port); | |
| } | |
| static int sierra_ioctl(struct usb_serial_port *port, struct file *file, | |
| unsigned int cmd, unsigned long arg) | |
| { | |
| return -ENOIOCTLCMD; | |
| } | |
| static void sierra_outdat_callback(struct urb *urb) | |
| { | |
| struct usb_serial_port *port = urb->context; | |
| struct sierra_port_private *portdata = usb_get_serial_port_data(port); | |
| int status = urb->status; | |
| unsigned long flags; | |
| dbg("%s - port %d", __func__, port->number); | |
| /* free up the transfer buffer, as usb_free_urb() does not do this */ | |
| kfree(urb->transfer_buffer); | |
| if (status) | |
| dbg("%s - nonzero write bulk status received: %d", | |
| __func__, status); | |
| spin_lock_irqsave(&portdata->lock, flags); | |
| --portdata->outstanding_urbs; | |
| spin_unlock_irqrestore(&portdata->lock, flags); | |
| usb_serial_port_softint(port); | |
| } | |
| /* Write */ | |
| static int sierra_write(struct usb_serial_port *port, | |
| const unsigned char *buf, int count) | |
| { | |
| struct sierra_port_private *portdata = usb_get_serial_port_data(port); | |
| struct usb_serial *serial = port->serial; | |
| unsigned long flags; | |
| unsigned char *buffer; | |
| struct urb *urb; | |
| int status; | |
| portdata = usb_get_serial_port_data(port); | |
| dbg("%s: write (%d chars)", __func__, count); | |
| spin_lock_irqsave(&portdata->lock, flags); | |
| if (portdata->outstanding_urbs > N_OUT_URB) { | |
| spin_unlock_irqrestore(&portdata->lock, flags); | |
| dbg("%s - write limit hit\n", __func__); | |
| return 0; | |
| } | |
| portdata->outstanding_urbs++; | |
| spin_unlock_irqrestore(&portdata->lock, flags); | |
| buffer = kmalloc(count, GFP_ATOMIC); | |
| if (!buffer) { | |
| dev_err(&port->dev, "out of memory\n"); | |
| count = -ENOMEM; | |
| goto error_no_buffer; | |
| } | |
| urb = usb_alloc_urb(0, GFP_ATOMIC); | |
| if (!urb) { | |
| dev_err(&port->dev, "no more free urbs\n"); | |
| count = -ENOMEM; | |
| goto error_no_urb; | |
| } | |
| memcpy(buffer, buf, count); | |
| usb_serial_debug_data(debug, &port->dev, __func__, count, buffer); | |
| usb_fill_bulk_urb(urb, serial->dev, | |
| usb_sndbulkpipe(serial->dev, | |
| port->bulk_out_endpointAddress), | |
| buffer, count, sierra_outdat_callback, port); | |
| /* send it down the pipe */ | |
| status = usb_submit_urb(urb, GFP_ATOMIC); | |
| if (status) { | |
| dev_err(&port->dev, "%s - usb_submit_urb(write bulk) failed " | |
| "with status = %d\n", __func__, status); | |
| count = status; | |
| goto error; | |
| } | |
| /* we are done with this urb, so let the host driver | |
| * really free it when it is finished with it */ | |
| usb_free_urb(urb); | |
| return count; | |
| error: | |
| usb_free_urb(urb); | |
| error_no_urb: | |
| kfree(buffer); | |
| error_no_buffer: | |
| spin_lock_irqsave(&portdata->lock, flags); | |
| --portdata->outstanding_urbs; | |
| spin_unlock_irqrestore(&portdata->lock, flags); | |
| return count; | |
| } | |
| static void sierra_indat_callback(struct urb *urb) | |
| { | |
| int err; | |
| int endpoint; | |
| struct usb_serial_port *port; | |
| struct tty_struct *tty; | |
| unsigned char *data = urb->transfer_buffer; | |
| int status = urb->status; | |
| dbg("%s: %p", __func__, urb); | |
| endpoint = usb_pipeendpoint(urb->pipe); | |
| port = urb->context; | |
| if (status) { | |
| dbg("%s: nonzero status: %d on endpoint %02x.", | |
| __func__, status, endpoint); | |
| } else { | |
| tty = port->tty; | |
| if (urb->actual_length) { | |
| tty_buffer_request_room(tty, urb->actual_length); | |
| tty_insert_flip_string(tty, data, urb->actual_length); | |
| tty_flip_buffer_push(tty); | |
| } else { | |
| dbg("%s: empty read urb received", __func__); | |
| } | |
| /* Resubmit urb so we continue receiving */ | |
| if (port->open_count && status != -ESHUTDOWN) { | |
| err = usb_submit_urb(urb, GFP_ATOMIC); | |
| if (err) | |
| dev_err(&port->dev, "resubmit read urb failed." | |
| "(%d)\n", err); | |
| } | |
| } | |
| return; | |
| } | |
| static void sierra_instat_callback(struct urb *urb) | |
| { | |
| int err; | |
| int status = urb->status; | |
| struct usb_serial_port *port = urb->context; | |
| struct sierra_port_private *portdata = usb_get_serial_port_data(port); | |
| struct usb_serial *serial = port->serial; | |
| dbg("%s", __func__); | |
| dbg("%s: urb %p port %p has data %p", __func__, urb, port, portdata); | |
| if (status == 0) { | |
| struct usb_ctrlrequest *req_pkt = | |
| (struct usb_ctrlrequest *)urb->transfer_buffer; | |
| if (!req_pkt) { | |
| dbg("%s: NULL req_pkt\n", __func__); | |
| return; | |
| } | |
| if ((req_pkt->bRequestType == 0xA1) && | |
| (req_pkt->bRequest == 0x20)) { | |
| int old_dcd_state; | |
| unsigned char signals = *((unsigned char *) | |
| urb->transfer_buffer + | |
| sizeof(struct usb_ctrlrequest)); | |
| dbg("%s: signal x%x", __func__, signals); | |
| old_dcd_state = portdata->dcd_state; | |
| portdata->cts_state = 1; | |
| portdata->dcd_state = ((signals & 0x01) ? 1 : 0); | |
| portdata->dsr_state = ((signals & 0x02) ? 1 : 0); | |
| portdata->ri_state = ((signals & 0x08) ? 1 : 0); | |
| if (port->tty && !C_CLOCAL(port->tty) && | |
| old_dcd_state && !portdata->dcd_state) | |
| tty_hangup(port->tty); | |
| } else { | |
| dbg("%s: type %x req %x", __func__, | |
| req_pkt->bRequestType, req_pkt->bRequest); | |
| } | |
| } else | |
| dbg("%s: error %d", __func__, status); | |
| /* Resubmit urb so we continue receiving IRQ data */ | |
| if (status != -ESHUTDOWN) { | |
| urb->dev = serial->dev; | |
| err = usb_submit_urb(urb, GFP_ATOMIC); | |
| if (err) | |
| dbg("%s: resubmit intr urb failed. (%d)", | |
| __func__, err); | |
| } | |
| } | |
| static int sierra_write_room(struct usb_serial_port *port) | |
| { | |
| struct sierra_port_private *portdata = usb_get_serial_port_data(port); | |
| unsigned long flags; | |
| dbg("%s - port %d", __func__, port->number); | |
| /* try to give a good number back based on if we have any free urbs at | |
| * this point in time */ | |
| spin_lock_irqsave(&portdata->lock, flags); | |
| if (portdata->outstanding_urbs > N_OUT_URB * 2 / 3) { | |
| spin_unlock_irqrestore(&portdata->lock, flags); | |
| dbg("%s - write limit hit\n", __func__); | |
| return 0; | |
| } | |
| spin_unlock_irqrestore(&portdata->lock, flags); | |
| return 2048; | |
| } | |
| static int sierra_chars_in_buffer(struct usb_serial_port *port) | |
| { | |
| dbg("%s - port %d", __func__, port->number); | |
| /* | |
| * We can't really account for how much data we | |
| * have sent out, but hasn't made it through to the | |
| * device as we can't see the backend here, so just | |
| * tell the tty layer that everything is flushed. | |
| * | |
| * FIXME: should walk the outstanding urbs info | |
| */ | |
| return 0; | |
| } | |
| static int sierra_open(struct usb_serial_port *port, struct file *filp) | |
| { | |
| struct sierra_port_private *portdata; | |
| struct usb_serial *serial = port->serial; | |
| int i; | |
| struct urb *urb; | |
| int result; | |
| portdata = usb_get_serial_port_data(port); | |
| dbg("%s", __func__); | |
| /* Set some sane defaults */ | |
| portdata->rts_state = 1; | |
| portdata->dtr_state = 1; | |
| /* Reset low level data toggle and start reading from endpoints */ | |
| for (i = 0; i < N_IN_URB; i++) { | |
| urb = portdata->in_urbs[i]; | |
| if (!urb) | |
| continue; | |
| if (urb->dev != serial->dev) { | |
| dbg("%s: dev %p != %p", __func__, | |
| urb->dev, serial->dev); | |
| continue; | |
| } | |
| /* | |
| * make sure endpoint data toggle is synchronized with the | |
| * device | |
| */ | |
| usb_clear_halt(urb->dev, urb->pipe); | |
| result = usb_submit_urb(urb, GFP_KERNEL); | |
| if (result) { | |
| dev_err(&port->dev, "submit urb %d failed (%d) %d\n", | |
| i, result, urb->transfer_buffer_length); | |
| } | |
| } | |
| port->tty->low_latency = 1; | |
| sierra_send_setup(port); | |
| /* start up the interrupt endpoint if we have one */ | |
| if (port->interrupt_in_urb) { | |
| result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); | |
| if (result) | |
| dev_err(&port->dev, "submit irq_in urb failed %d\n", | |
| result); | |
| } | |
| return 0; | |
| } | |
| static void sierra_close(struct usb_serial_port *port, struct file *filp) | |
| { | |
| int i; | |
| struct usb_serial *serial = port->serial; | |
| struct sierra_port_private *portdata; | |
| dbg("%s", __func__); | |
| portdata = usb_get_serial_port_data(port); | |
| portdata->rts_state = 0; | |
| portdata->dtr_state = 0; | |
| if (serial->dev) { | |
| mutex_lock(&serial->disc_mutex); | |
| if (!serial->disconnected) | |
| sierra_send_setup(port); | |
| mutex_unlock(&serial->disc_mutex); | |
| /* Stop reading/writing urbs */ | |
| for (i = 0; i < N_IN_URB; i++) | |
| usb_kill_urb(portdata->in_urbs[i]); | |
| } | |
| usb_kill_urb(port->interrupt_in_urb); | |
| port->tty = NULL; | |
| } | |
| static int sierra_startup(struct usb_serial *serial) | |
| { | |
| struct usb_serial_port *port; | |
| struct sierra_port_private *portdata; | |
| struct urb *urb; | |
| int i; | |
| int j; | |
| dbg("%s", __func__); | |
| /* Set Device mode to D0 */ | |
| sierra_set_power_state(serial->dev, 0x0000); | |
| /* Check NMEA and set */ | |
| if (nmea) | |
| sierra_vsc_set_nmea(serial->dev, 1); | |
| /* Now setup per port private data */ | |
| for (i = 0; i < serial->num_ports; i++) { | |
| port = serial->port[i]; | |
| portdata = kzalloc(sizeof(*portdata), GFP_KERNEL); | |
| if (!portdata) { | |
| dbg("%s: kmalloc for sierra_port_private (%d) failed!.", | |
| __func__, i); | |
| return -ENOMEM; | |
| } | |
| spin_lock_init(&portdata->lock); | |
| for (j = 0; j < N_IN_URB; j++) { | |
| portdata->in_buffer[j] = kmalloc(IN_BUFLEN, GFP_KERNEL); | |
| if (!portdata->in_buffer[j]) { | |
| for (--j; j >= 0; j--) | |
| kfree(portdata->in_buffer[j]); | |
| kfree(portdata); | |
| return -ENOMEM; | |
| } | |
| } | |
| usb_set_serial_port_data(port, portdata); | |
| /* initialize the in urbs */ | |
| for (j = 0; j < N_IN_URB; ++j) { | |
| urb = usb_alloc_urb(0, GFP_KERNEL); | |
| if (urb == NULL) { | |
| dbg("%s: alloc for in port failed.", | |
| __func__); | |
| continue; | |
| } | |
| /* Fill URB using supplied data. */ | |
| usb_fill_bulk_urb(urb, serial->dev, | |
| usb_rcvbulkpipe(serial->dev, | |
| port->bulk_in_endpointAddress), | |
| portdata->in_buffer[j], IN_BUFLEN, | |
| sierra_indat_callback, port); | |
| portdata->in_urbs[j] = urb; | |
| } | |
| } | |
| return 0; | |
| } | |
| static void sierra_shutdown(struct usb_serial *serial) | |
| { | |
| int i, j; | |
| struct usb_serial_port *port; | |
| struct sierra_port_private *portdata; | |
| dbg("%s", __func__); | |
| for (i = 0; i < serial->num_ports; ++i) { | |
| port = serial->port[i]; | |
| if (!port) | |
| continue; | |
| portdata = usb_get_serial_port_data(port); | |
| if (!portdata) | |
| continue; | |
| for (j = 0; j < N_IN_URB; j++) { | |
| usb_kill_urb(portdata->in_urbs[j]); | |
| usb_free_urb(portdata->in_urbs[j]); | |
| kfree(portdata->in_buffer[j]); | |
| } | |
| kfree(portdata); | |
| usb_set_serial_port_data(port, NULL); | |
| } | |
| } | |
| static struct usb_serial_driver sierra_device = { | |
| .driver = { | |
| .owner = THIS_MODULE, | |
| .name = "sierra1", | |
| }, | |
| .description = "Sierra USB modem", | |
| .id_table = id_table, | |
| .usb_driver = &sierra_driver, | |
| .calc_num_ports = sierra_calc_num_ports, | |
| .probe = sierra_probe, | |
| .open = sierra_open, | |
| .close = sierra_close, | |
| .write = sierra_write, | |
| .write_room = sierra_write_room, | |
| .chars_in_buffer = sierra_chars_in_buffer, | |
| .throttle = sierra_rx_throttle, | |
| .unthrottle = sierra_rx_unthrottle, | |
| .ioctl = sierra_ioctl, | |
| .set_termios = sierra_set_termios, | |
| .break_ctl = sierra_break_ctl, | |
| .tiocmget = sierra_tiocmget, | |
| .tiocmset = sierra_tiocmset, | |
| .attach = sierra_startup, | |
| .shutdown = sierra_shutdown, | |
| .read_int_callback = sierra_instat_callback, | |
| }; | |
| /* Functions used by new usb-serial code. */ | |
| static int __init sierra_init(void) | |
| { | |
| int retval; | |
| retval = usb_serial_register(&sierra_device); | |
| if (retval) | |
| goto failed_device_register; | |
| retval = usb_register(&sierra_driver); | |
| if (retval) | |
| goto failed_driver_register; | |
| info(DRIVER_DESC ": " DRIVER_VERSION); | |
| return 0; | |
| failed_driver_register: | |
| usb_serial_deregister(&sierra_device); | |
| failed_device_register: | |
| return retval; | |
| } | |
| static void __exit sierra_exit(void) | |
| { | |
| usb_deregister (&sierra_driver); | |
| usb_serial_deregister(&sierra_device); | |
| } | |
| module_init(sierra_init); | |
| module_exit(sierra_exit); | |
| MODULE_AUTHOR(DRIVER_AUTHOR); | |
| MODULE_DESCRIPTION(DRIVER_DESC); | |
| MODULE_VERSION(DRIVER_VERSION); | |
| MODULE_LICENSE("GPL"); | |
| module_param(truinstall, bool, 0); | |
| MODULE_PARM_DESC(truinstall, "TRU-Install support"); | |
| module_param(nmea, bool, 0); | |
| MODULE_PARM_DESC(nmea, "NMEA streaming"); | |
| #ifdef CONFIG_USB_DEBUG | |
| module_param(debug, bool, S_IRUGO | S_IWUSR); | |
| MODULE_PARM_DESC(debug, "Debug messages"); | |
| #endif | |