| /* | |
| Copyright (C) 2004 - 2008 rt2x00 SourceForge Project | |
| <http://rt2x00.serialmonkey.com> | |
| This program is free software; you can redistribute it and/or modify | |
| it under the terms of the GNU General Public License as published by | |
| the Free Software Foundation; either version 2 of the License, or | |
| (at your option) any later version. | |
| This program is distributed in the hope that it will be useful, | |
| but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| GNU General Public License for more details. | |
| You should have received a copy of the GNU General Public License | |
| along with this program; if not, write to the | |
| Free Software Foundation, Inc., | |
| 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. | |
| */ | |
| /* | |
| Module: rt2x00rfkill | |
| Abstract: rt2x00 rfkill routines. | |
| */ | |
| #include <linux/input-polldev.h> | |
| #include <linux/kernel.h> | |
| #include <linux/module.h> | |
| #include <linux/rfkill.h> | |
| #include "rt2x00.h" | |
| #include "rt2x00lib.h" | |
| static int rt2x00rfkill_toggle_radio(void *data, enum rfkill_state state) | |
| { | |
| struct rt2x00_dev *rt2x00dev = data; | |
| int retval = 0; | |
| if (unlikely(!rt2x00dev)) | |
| return 0; | |
| /* | |
| * Only continue if there are enabled interfaces. | |
| */ | |
| if (!test_bit(DEVICE_STARTED, &rt2x00dev->flags)) | |
| return 0; | |
| if (state == RFKILL_STATE_ON) { | |
| INFO(rt2x00dev, "Hardware button pressed, enabling radio.\n"); | |
| __clear_bit(DEVICE_DISABLED_RADIO_HW, &rt2x00dev->flags); | |
| retval = rt2x00lib_enable_radio(rt2x00dev); | |
| } else if (state == RFKILL_STATE_OFF) { | |
| INFO(rt2x00dev, "Hardware button pressed, disabling radio.\n"); | |
| __set_bit(DEVICE_DISABLED_RADIO_HW, &rt2x00dev->flags); | |
| rt2x00lib_disable_radio(rt2x00dev); | |
| } | |
| return retval; | |
| } | |
| static void rt2x00rfkill_poll(struct input_polled_dev *poll_dev) | |
| { | |
| struct rt2x00_dev *rt2x00dev = poll_dev->private; | |
| int state = rt2x00dev->ops->lib->rfkill_poll(rt2x00dev); | |
| if (rt2x00dev->rfkill->state != state) { | |
| input_report_key(poll_dev->input, KEY_WLAN, 1); | |
| input_report_key(poll_dev->input, KEY_WLAN, 0); | |
| } | |
| } | |
| void rt2x00rfkill_register(struct rt2x00_dev *rt2x00dev) | |
| { | |
| if (!test_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags) || | |
| !test_bit(RFKILL_STATE_ALLOCATED, &rt2x00dev->rfkill_state)) | |
| return; | |
| if (rfkill_register(rt2x00dev->rfkill)) { | |
| ERROR(rt2x00dev, "Failed to register rfkill handler.\n"); | |
| return; | |
| } | |
| if (input_register_polled_device(rt2x00dev->poll_dev)) { | |
| ERROR(rt2x00dev, "Failed to register polled device.\n"); | |
| rfkill_unregister(rt2x00dev->rfkill); | |
| return; | |
| } | |
| __set_bit(RFKILL_STATE_REGISTERED, &rt2x00dev->rfkill_state); | |
| /* | |
| * Force initial poll which will detect the initial device state, | |
| * and correctly sends the signal to the rfkill layer about this | |
| * state. | |
| */ | |
| rt2x00rfkill_poll(rt2x00dev->poll_dev); | |
| } | |
| void rt2x00rfkill_unregister(struct rt2x00_dev *rt2x00dev) | |
| { | |
| if (!test_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags) || | |
| !test_bit(RFKILL_STATE_REGISTERED, &rt2x00dev->rfkill_state)) | |
| return; | |
| input_unregister_polled_device(rt2x00dev->poll_dev); | |
| rfkill_unregister(rt2x00dev->rfkill); | |
| __clear_bit(RFKILL_STATE_REGISTERED, &rt2x00dev->rfkill_state); | |
| } | |
| static struct input_polled_dev * | |
| rt2x00rfkill_allocate_polldev(struct rt2x00_dev *rt2x00dev) | |
| { | |
| struct input_polled_dev *poll_dev; | |
| poll_dev = input_allocate_polled_device(); | |
| if (!poll_dev) | |
| return NULL; | |
| poll_dev->private = rt2x00dev; | |
| poll_dev->poll = rt2x00rfkill_poll; | |
| poll_dev->poll_interval = RFKILL_POLL_INTERVAL; | |
| poll_dev->input->name = rt2x00dev->ops->name; | |
| poll_dev->input->phys = wiphy_name(rt2x00dev->hw->wiphy); | |
| poll_dev->input->id.bustype = BUS_HOST; | |
| poll_dev->input->id.vendor = 0x1814; | |
| poll_dev->input->id.product = rt2x00dev->chip.rt; | |
| poll_dev->input->id.version = rt2x00dev->chip.rev; | |
| poll_dev->input->dev.parent = wiphy_dev(rt2x00dev->hw->wiphy); | |
| poll_dev->input->evbit[0] = BIT(EV_KEY); | |
| set_bit(KEY_WLAN, poll_dev->input->keybit); | |
| return poll_dev; | |
| } | |
| void rt2x00rfkill_allocate(struct rt2x00_dev *rt2x00dev) | |
| { | |
| if (!test_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags)) | |
| return; | |
| rt2x00dev->rfkill = | |
| rfkill_allocate(wiphy_dev(rt2x00dev->hw->wiphy), RFKILL_TYPE_WLAN); | |
| if (!rt2x00dev->rfkill) { | |
| ERROR(rt2x00dev, "Failed to allocate rfkill handler.\n"); | |
| return; | |
| } | |
| rt2x00dev->rfkill->name = rt2x00dev->ops->name; | |
| rt2x00dev->rfkill->data = rt2x00dev; | |
| rt2x00dev->rfkill->state = -1; | |
| rt2x00dev->rfkill->toggle_radio = rt2x00rfkill_toggle_radio; | |
| rt2x00dev->poll_dev = rt2x00rfkill_allocate_polldev(rt2x00dev); | |
| if (!rt2x00dev->poll_dev) { | |
| ERROR(rt2x00dev, "Failed to allocate polled device.\n"); | |
| rfkill_free(rt2x00dev->rfkill); | |
| rt2x00dev->rfkill = NULL; | |
| return; | |
| } | |
| return; | |
| } | |
| void rt2x00rfkill_free(struct rt2x00_dev *rt2x00dev) | |
| { | |
| if (!test_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags) || | |
| !test_bit(RFKILL_STATE_ALLOCATED, &rt2x00dev->rfkill_state)) | |
| return; | |
| input_free_polled_device(rt2x00dev->poll_dev); | |
| rt2x00dev->poll_dev = NULL; | |
| rfkill_free(rt2x00dev->rfkill); | |
| rt2x00dev->rfkill = NULL; | |
| } | |
| void rt2x00rfkill_suspend(struct rt2x00_dev *rt2x00dev) | |
| { | |
| if (!test_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags) || | |
| !test_bit(RFKILL_STATE_ALLOCATED, &rt2x00dev->rfkill_state)) | |
| return; | |
| input_free_polled_device(rt2x00dev->poll_dev); | |
| rt2x00dev->poll_dev = NULL; | |
| } | |
| void rt2x00rfkill_resume(struct rt2x00_dev *rt2x00dev) | |
| { | |
| if (!test_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags) || | |
| !test_bit(RFKILL_STATE_ALLOCATED, &rt2x00dev->rfkill_state)) | |
| return; | |
| rt2x00dev->poll_dev = rt2x00rfkill_allocate_polldev(rt2x00dev); | |
| if (!rt2x00dev->poll_dev) { | |
| ERROR(rt2x00dev, "Failed to allocate polled device.\n"); | |
| return; | |
| } | |
| } |