| /* | |
| Copyright (C) 2004 - 2008 rt2x00 SourceForge Project | |
| <http://rt2x00.serialmonkey.com> | |
| This program is free software; you can redistribute it and/or modify | |
| it under the terms of the GNU General Public License as published by | |
| the Free Software Foundation; either version 2 of the License, or | |
| (at your option) any later version. | |
| This program is distributed in the hope that it will be useful, | |
| but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| GNU General Public License for more details. | |
| You should have received a copy of the GNU General Public License | |
| along with this program; if not, write to the | |
| Free Software Foundation, Inc., | |
| 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. | |
| */ | |
| /* | |
| Module: rt2x00lib | |
| Abstract: rt2x00 queue specific routines. | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/module.h> | |
| #include "rt2x00.h" | |
| #include "rt2x00lib.h" | |
| struct sk_buff *rt2x00queue_alloc_rxskb(struct data_queue *queue) | |
| { | |
| struct sk_buff *skb; | |
| unsigned int frame_size; | |
| unsigned int reserved_size; | |
| /* | |
| * The frame size includes descriptor size, because the | |
| * hardware directly receive the frame into the skbuffer. | |
| */ | |
| frame_size = queue->data_size + queue->desc_size; | |
| /* | |
| * For the allocation we should keep a few things in mind: | |
| * 1) 4byte alignment of 802.11 payload | |
| * | |
| * For (1) we need at most 4 bytes to guarentee the correct | |
| * alignment. We are going to optimize the fact that the chance | |
| * that the 802.11 header_size % 4 == 2 is much bigger then | |
| * anything else. However since we need to move the frame up | |
| * to 3 bytes to the front, which means we need to preallocate | |
| * 6 bytes. | |
| */ | |
| reserved_size = 6; | |
| /* | |
| * Allocate skbuffer. | |
| */ | |
| skb = dev_alloc_skb(frame_size + reserved_size); | |
| if (!skb) | |
| return NULL; | |
| skb_reserve(skb, reserved_size); | |
| skb_put(skb, frame_size); | |
| return skb; | |
| } | |
| EXPORT_SYMBOL_GPL(rt2x00queue_alloc_rxskb); | |
| void rt2x00queue_create_tx_descriptor(struct queue_entry *entry, | |
| struct txentry_desc *txdesc) | |
| { | |
| struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; | |
| struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(entry->skb); | |
| struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)entry->skb->data; | |
| struct ieee80211_rate *rate = | |
| ieee80211_get_tx_rate(rt2x00dev->hw, tx_info); | |
| const struct rt2x00_rate *hwrate; | |
| unsigned int data_length; | |
| unsigned int duration; | |
| unsigned int residual; | |
| u16 frame_control; | |
| memset(txdesc, 0, sizeof(*txdesc)); | |
| /* | |
| * Initialize information from queue | |
| */ | |
| txdesc->queue = entry->queue->qid; | |
| txdesc->cw_min = entry->queue->cw_min; | |
| txdesc->cw_max = entry->queue->cw_max; | |
| txdesc->aifs = entry->queue->aifs; | |
| /* Data length should be extended with 4 bytes for CRC */ | |
| data_length = entry->skb->len + 4; | |
| /* | |
| * Read required fields from ieee80211 header. | |
| */ | |
| frame_control = le16_to_cpu(hdr->frame_control); | |
| /* | |
| * Check whether this frame is to be acked. | |
| */ | |
| if (!(tx_info->flags & IEEE80211_TX_CTL_NO_ACK)) | |
| __set_bit(ENTRY_TXD_ACK, &txdesc->flags); | |
| /* | |
| * Check if this is a RTS/CTS frame | |
| */ | |
| if (is_rts_frame(frame_control) || is_cts_frame(frame_control)) { | |
| __set_bit(ENTRY_TXD_BURST, &txdesc->flags); | |
| if (is_rts_frame(frame_control)) | |
| __set_bit(ENTRY_TXD_RTS_FRAME, &txdesc->flags); | |
| else | |
| __set_bit(ENTRY_TXD_CTS_FRAME, &txdesc->flags); | |
| if (tx_info->control.rts_cts_rate_idx >= 0) | |
| rate = | |
| ieee80211_get_rts_cts_rate(rt2x00dev->hw, tx_info); | |
| } | |
| /* | |
| * Determine retry information. | |
| */ | |
| txdesc->retry_limit = tx_info->control.retry_limit; | |
| if (tx_info->flags & IEEE80211_TX_CTL_LONG_RETRY_LIMIT) | |
| __set_bit(ENTRY_TXD_RETRY_MODE, &txdesc->flags); | |
| /* | |
| * Check if more fragments are pending | |
| */ | |
| if (ieee80211_has_morefrags(hdr->frame_control)) { | |
| __set_bit(ENTRY_TXD_BURST, &txdesc->flags); | |
| __set_bit(ENTRY_TXD_MORE_FRAG, &txdesc->flags); | |
| } | |
| /* | |
| * Beacons and probe responses require the tsf timestamp | |
| * to be inserted into the frame. | |
| */ | |
| if (txdesc->queue == QID_BEACON || is_probe_resp(frame_control)) | |
| __set_bit(ENTRY_TXD_REQ_TIMESTAMP, &txdesc->flags); | |
| /* | |
| * Determine with what IFS priority this frame should be send. | |
| * Set ifs to IFS_SIFS when the this is not the first fragment, | |
| * or this fragment came after RTS/CTS. | |
| */ | |
| if (test_bit(ENTRY_TXD_RTS_FRAME, &txdesc->flags)) { | |
| txdesc->ifs = IFS_SIFS; | |
| } else if (tx_info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT) { | |
| __set_bit(ENTRY_TXD_FIRST_FRAGMENT, &txdesc->flags); | |
| txdesc->ifs = IFS_BACKOFF; | |
| } else { | |
| txdesc->ifs = IFS_SIFS; | |
| } | |
| /* | |
| * PLCP setup | |
| * Length calculation depends on OFDM/CCK rate. | |
| */ | |
| hwrate = rt2x00_get_rate(rate->hw_value); | |
| txdesc->signal = hwrate->plcp; | |
| txdesc->service = 0x04; | |
| if (hwrate->flags & DEV_RATE_OFDM) { | |
| __set_bit(ENTRY_TXD_OFDM_RATE, &txdesc->flags); | |
| txdesc->length_high = (data_length >> 6) & 0x3f; | |
| txdesc->length_low = data_length & 0x3f; | |
| } else { | |
| /* | |
| * Convert length to microseconds. | |
| */ | |
| residual = get_duration_res(data_length, hwrate->bitrate); | |
| duration = get_duration(data_length, hwrate->bitrate); | |
| if (residual != 0) { | |
| duration++; | |
| /* | |
| * Check if we need to set the Length Extension | |
| */ | |
| if (hwrate->bitrate == 110 && residual <= 30) | |
| txdesc->service |= 0x80; | |
| } | |
| txdesc->length_high = (duration >> 8) & 0xff; | |
| txdesc->length_low = duration & 0xff; | |
| /* | |
| * When preamble is enabled we should set the | |
| * preamble bit for the signal. | |
| */ | |
| if (rt2x00_get_rate_preamble(rate->hw_value)) | |
| txdesc->signal |= 0x08; | |
| } | |
| } | |
| EXPORT_SYMBOL_GPL(rt2x00queue_create_tx_descriptor); | |
| void rt2x00queue_write_tx_descriptor(struct queue_entry *entry, | |
| struct txentry_desc *txdesc) | |
| { | |
| struct data_queue *queue = entry->queue; | |
| struct rt2x00_dev *rt2x00dev = queue->rt2x00dev; | |
| rt2x00dev->ops->lib->write_tx_desc(rt2x00dev, entry->skb, txdesc); | |
| /* | |
| * All processing on the frame has been completed, this means | |
| * it is now ready to be dumped to userspace through debugfs. | |
| */ | |
| rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_TX, entry->skb); | |
| /* | |
| * Check if we need to kick the queue, there are however a few rules | |
| * 1) Don't kick beacon queue | |
| * 2) Don't kick unless this is the last in frame in a burst. | |
| * When the burst flag is set, this frame is always followed | |
| * by another frame which in some way are related to eachother. | |
| * This is true for fragments, RTS or CTS-to-self frames. | |
| * 3) Rule 2 can be broken when the available entries | |
| * in the queue are less then a certain threshold. | |
| */ | |
| if (entry->queue->qid == QID_BEACON) | |
| return; | |
| if (rt2x00queue_threshold(queue) || | |
| !test_bit(ENTRY_TXD_BURST, &txdesc->flags)) | |
| rt2x00dev->ops->lib->kick_tx_queue(rt2x00dev, queue->qid); | |
| } | |
| EXPORT_SYMBOL_GPL(rt2x00queue_write_tx_descriptor); | |
| int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb) | |
| { | |
| struct queue_entry *entry = rt2x00queue_get_entry(queue, Q_INDEX); | |
| struct txentry_desc txdesc; | |
| if (unlikely(rt2x00queue_full(queue))) | |
| return -EINVAL; | |
| if (__test_and_set_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags)) { | |
| ERROR(queue->rt2x00dev, | |
| "Arrived at non-free entry in the non-full queue %d.\n" | |
| "Please file bug report to %s.\n", | |
| queue->qid, DRV_PROJECT); | |
| return -EINVAL; | |
| } | |
| /* | |
| * Copy all TX descriptor information into txdesc, | |
| * after that we are free to use the skb->cb array | |
| * for our information. | |
| */ | |
| entry->skb = skb; | |
| rt2x00queue_create_tx_descriptor(entry, &txdesc); | |
| if (unlikely(queue->rt2x00dev->ops->lib->write_tx_data(entry))) { | |
| __clear_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags); | |
| return -EIO; | |
| } | |
| __set_bit(ENTRY_DATA_PENDING, &entry->flags); | |
| rt2x00queue_index_inc(queue, Q_INDEX); | |
| rt2x00queue_write_tx_descriptor(entry, &txdesc); | |
| return 0; | |
| } | |
| struct data_queue *rt2x00queue_get_queue(struct rt2x00_dev *rt2x00dev, | |
| const enum data_queue_qid queue) | |
| { | |
| int atim = test_bit(DRIVER_REQUIRE_ATIM_QUEUE, &rt2x00dev->flags); | |
| if (queue < rt2x00dev->ops->tx_queues && rt2x00dev->tx) | |
| return &rt2x00dev->tx[queue]; | |
| if (!rt2x00dev->bcn) | |
| return NULL; | |
| if (queue == QID_BEACON) | |
| return &rt2x00dev->bcn[0]; | |
| else if (queue == QID_ATIM && atim) | |
| return &rt2x00dev->bcn[1]; | |
| return NULL; | |
| } | |
| EXPORT_SYMBOL_GPL(rt2x00queue_get_queue); | |
| struct queue_entry *rt2x00queue_get_entry(struct data_queue *queue, | |
| enum queue_index index) | |
| { | |
| struct queue_entry *entry; | |
| unsigned long irqflags; | |
| if (unlikely(index >= Q_INDEX_MAX)) { | |
| ERROR(queue->rt2x00dev, | |
| "Entry requested from invalid index type (%d)\n", index); | |
| return NULL; | |
| } | |
| spin_lock_irqsave(&queue->lock, irqflags); | |
| entry = &queue->entries[queue->index[index]]; | |
| spin_unlock_irqrestore(&queue->lock, irqflags); | |
| return entry; | |
| } | |
| EXPORT_SYMBOL_GPL(rt2x00queue_get_entry); | |
| void rt2x00queue_index_inc(struct data_queue *queue, enum queue_index index) | |
| { | |
| unsigned long irqflags; | |
| if (unlikely(index >= Q_INDEX_MAX)) { | |
| ERROR(queue->rt2x00dev, | |
| "Index change on invalid index type (%d)\n", index); | |
| return; | |
| } | |
| spin_lock_irqsave(&queue->lock, irqflags); | |
| queue->index[index]++; | |
| if (queue->index[index] >= queue->limit) | |
| queue->index[index] = 0; | |
| if (index == Q_INDEX) { | |
| queue->length++; | |
| } else if (index == Q_INDEX_DONE) { | |
| queue->length--; | |
| queue->count ++; | |
| } | |
| spin_unlock_irqrestore(&queue->lock, irqflags); | |
| } | |
| EXPORT_SYMBOL_GPL(rt2x00queue_index_inc); | |
| static void rt2x00queue_reset(struct data_queue *queue) | |
| { | |
| unsigned long irqflags; | |
| spin_lock_irqsave(&queue->lock, irqflags); | |
| queue->count = 0; | |
| queue->length = 0; | |
| memset(queue->index, 0, sizeof(queue->index)); | |
| spin_unlock_irqrestore(&queue->lock, irqflags); | |
| } | |
| void rt2x00queue_init_rx(struct rt2x00_dev *rt2x00dev) | |
| { | |
| struct data_queue *queue = rt2x00dev->rx; | |
| unsigned int i; | |
| rt2x00queue_reset(queue); | |
| if (!rt2x00dev->ops->lib->init_rxentry) | |
| return; | |
| for (i = 0; i < queue->limit; i++) | |
| rt2x00dev->ops->lib->init_rxentry(rt2x00dev, | |
| &queue->entries[i]); | |
| } | |
| void rt2x00queue_init_tx(struct rt2x00_dev *rt2x00dev) | |
| { | |
| struct data_queue *queue; | |
| unsigned int i; | |
| txall_queue_for_each(rt2x00dev, queue) { | |
| rt2x00queue_reset(queue); | |
| if (!rt2x00dev->ops->lib->init_txentry) | |
| continue; | |
| for (i = 0; i < queue->limit; i++) | |
| rt2x00dev->ops->lib->init_txentry(rt2x00dev, | |
| &queue->entries[i]); | |
| } | |
| } | |
| static int rt2x00queue_alloc_entries(struct data_queue *queue, | |
| const struct data_queue_desc *qdesc) | |
| { | |
| struct queue_entry *entries; | |
| unsigned int entry_size; | |
| unsigned int i; | |
| rt2x00queue_reset(queue); | |
| queue->limit = qdesc->entry_num; | |
| queue->threshold = DIV_ROUND_UP(qdesc->entry_num, 10); | |
| queue->data_size = qdesc->data_size; | |
| queue->desc_size = qdesc->desc_size; | |
| /* | |
| * Allocate all queue entries. | |
| */ | |
| entry_size = sizeof(*entries) + qdesc->priv_size; | |
| entries = kzalloc(queue->limit * entry_size, GFP_KERNEL); | |
| if (!entries) | |
| return -ENOMEM; | |
| #define QUEUE_ENTRY_PRIV_OFFSET(__base, __index, __limit, __esize, __psize) \ | |
| ( ((char *)(__base)) + ((__limit) * (__esize)) + \ | |
| ((__index) * (__psize)) ) | |
| for (i = 0; i < queue->limit; i++) { | |
| entries[i].flags = 0; | |
| entries[i].queue = queue; | |
| entries[i].skb = NULL; | |
| entries[i].entry_idx = i; | |
| entries[i].priv_data = | |
| QUEUE_ENTRY_PRIV_OFFSET(entries, i, queue->limit, | |
| sizeof(*entries), qdesc->priv_size); | |
| } | |
| #undef QUEUE_ENTRY_PRIV_OFFSET | |
| queue->entries = entries; | |
| return 0; | |
| } | |
| int rt2x00queue_initialize(struct rt2x00_dev *rt2x00dev) | |
| { | |
| struct data_queue *queue; | |
| int status; | |
| status = rt2x00queue_alloc_entries(rt2x00dev->rx, rt2x00dev->ops->rx); | |
| if (status) | |
| goto exit; | |
| tx_queue_for_each(rt2x00dev, queue) { | |
| status = rt2x00queue_alloc_entries(queue, rt2x00dev->ops->tx); | |
| if (status) | |
| goto exit; | |
| } | |
| status = rt2x00queue_alloc_entries(rt2x00dev->bcn, rt2x00dev->ops->bcn); | |
| if (status) | |
| goto exit; | |
| if (!test_bit(DRIVER_REQUIRE_ATIM_QUEUE, &rt2x00dev->flags)) | |
| return 0; | |
| status = rt2x00queue_alloc_entries(&rt2x00dev->bcn[1], | |
| rt2x00dev->ops->atim); | |
| if (status) | |
| goto exit; | |
| return 0; | |
| exit: | |
| ERROR(rt2x00dev, "Queue entries allocation failed.\n"); | |
| rt2x00queue_uninitialize(rt2x00dev); | |
| return status; | |
| } | |
| void rt2x00queue_uninitialize(struct rt2x00_dev *rt2x00dev) | |
| { | |
| struct data_queue *queue; | |
| queue_for_each(rt2x00dev, queue) { | |
| kfree(queue->entries); | |
| queue->entries = NULL; | |
| } | |
| } | |
| static void rt2x00queue_init(struct rt2x00_dev *rt2x00dev, | |
| struct data_queue *queue, enum data_queue_qid qid) | |
| { | |
| spin_lock_init(&queue->lock); | |
| queue->rt2x00dev = rt2x00dev; | |
| queue->qid = qid; | |
| queue->aifs = 2; | |
| queue->cw_min = 5; | |
| queue->cw_max = 10; | |
| } | |
| int rt2x00queue_allocate(struct rt2x00_dev *rt2x00dev) | |
| { | |
| struct data_queue *queue; | |
| enum data_queue_qid qid; | |
| unsigned int req_atim = | |
| !!test_bit(DRIVER_REQUIRE_ATIM_QUEUE, &rt2x00dev->flags); | |
| /* | |
| * We need the following queues: | |
| * RX: 1 | |
| * TX: ops->tx_queues | |
| * Beacon: 1 | |
| * Atim: 1 (if required) | |
| */ | |
| rt2x00dev->data_queues = 2 + rt2x00dev->ops->tx_queues + req_atim; | |
| queue = kzalloc(rt2x00dev->data_queues * sizeof(*queue), GFP_KERNEL); | |
| if (!queue) { | |
| ERROR(rt2x00dev, "Queue allocation failed.\n"); | |
| return -ENOMEM; | |
| } | |
| /* | |
| * Initialize pointers | |
| */ | |
| rt2x00dev->rx = queue; | |
| rt2x00dev->tx = &queue[1]; | |
| rt2x00dev->bcn = &queue[1 + rt2x00dev->ops->tx_queues]; | |
| /* | |
| * Initialize queue parameters. | |
| * RX: qid = QID_RX | |
| * TX: qid = QID_AC_BE + index | |
| * TX: cw_min: 2^5 = 32. | |
| * TX: cw_max: 2^10 = 1024. | |
| * BCN: qid = QID_BEACON | |
| * ATIM: qid = QID_ATIM | |
| */ | |
| rt2x00queue_init(rt2x00dev, rt2x00dev->rx, QID_RX); | |
| qid = QID_AC_BE; | |
| tx_queue_for_each(rt2x00dev, queue) | |
| rt2x00queue_init(rt2x00dev, queue, qid++); | |
| rt2x00queue_init(rt2x00dev, &rt2x00dev->bcn[0], QID_BEACON); | |
| if (req_atim) | |
| rt2x00queue_init(rt2x00dev, &rt2x00dev->bcn[1], QID_ATIM); | |
| return 0; | |
| } | |
| void rt2x00queue_free(struct rt2x00_dev *rt2x00dev) | |
| { | |
| kfree(rt2x00dev->rx); | |
| rt2x00dev->rx = NULL; | |
| rt2x00dev->tx = NULL; | |
| rt2x00dev->bcn = NULL; | |
| } |