| /* | |
| Written 1998-2000 by Donald Becker. | |
| This software may be used and distributed according to the terms of | |
| the GNU General Public License (GPL), incorporated herein by reference. | |
| Drivers based on or derived from this code fall under the GPL and must | |
| retain the authorship, copyright and license notice. This file is not | |
| a complete program and may only be used when the entire operating | |
| system is licensed under the GPL. | |
| The author may be reached as becker@scyld.com, or C/O | |
| Scyld Computing Corporation | |
| 410 Severn Ave., Suite 210 | |
| Annapolis MD 21403 | |
| Support information and updates available at | |
| http://www.scyld.com/network/pci-skeleton.html | |
| Linux kernel updates: | |
| Version 2.51, Nov 17, 2001 (jgarzik): | |
| - Add ethtool support | |
| - Replace some MII-related magic numbers with constants | |
| */ | |
| #define DRV_NAME "fealnx" | |
| #define DRV_VERSION "2.52" | |
| #define DRV_RELDATE "Sep-11-2006" | |
| static int debug; /* 1-> print debug message */ | |
| static int max_interrupt_work = 20; | |
| /* Maximum number of multicast addresses to filter (vs. Rx-all-multicast). */ | |
| static int multicast_filter_limit = 32; | |
| /* Set the copy breakpoint for the copy-only-tiny-frames scheme. */ | |
| /* Setting to > 1518 effectively disables this feature. */ | |
| static int rx_copybreak; | |
| /* Used to pass the media type, etc. */ | |
| /* Both 'options[]' and 'full_duplex[]' should exist for driver */ | |
| /* interoperability. */ | |
| /* The media type is usually passed in 'options[]'. */ | |
| #define MAX_UNITS 8 /* More are supported, limit only on options */ | |
| static int options[MAX_UNITS] = { -1, -1, -1, -1, -1, -1, -1, -1 }; | |
| static int full_duplex[MAX_UNITS] = { -1, -1, -1, -1, -1, -1, -1, -1 }; | |
| /* Operational parameters that are set at compile time. */ | |
| /* Keep the ring sizes a power of two for compile efficiency. */ | |
| /* The compiler will convert <unsigned>'%'<2^N> into a bit mask. */ | |
| /* Making the Tx ring too large decreases the effectiveness of channel */ | |
| /* bonding and packet priority. */ | |
| /* There are no ill effects from too-large receive rings. */ | |
| // 88-12-9 modify, | |
| // #define TX_RING_SIZE 16 | |
| // #define RX_RING_SIZE 32 | |
| #define TX_RING_SIZE 6 | |
| #define RX_RING_SIZE 12 | |
| #define TX_TOTAL_SIZE TX_RING_SIZE*sizeof(struct fealnx_desc) | |
| #define RX_TOTAL_SIZE RX_RING_SIZE*sizeof(struct fealnx_desc) | |
| /* Operational parameters that usually are not changed. */ | |
| /* Time in jiffies before concluding the transmitter is hung. */ | |
| #define TX_TIMEOUT (2*HZ) | |
| #define PKT_BUF_SZ 1536 /* Size of each temporary Rx buffer. */ | |
| /* Include files, designed to support most kernel versions 2.0.0 and later. */ | |
| #include <linux/module.h> | |
| #include <linux/kernel.h> | |
| #include <linux/string.h> | |
| #include <linux/timer.h> | |
| #include <linux/errno.h> | |
| #include <linux/ioport.h> | |
| #include <linux/slab.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/pci.h> | |
| #include <linux/netdevice.h> | |
| #include <linux/etherdevice.h> | |
| #include <linux/skbuff.h> | |
| #include <linux/init.h> | |
| #include <linux/mii.h> | |
| #include <linux/ethtool.h> | |
| #include <linux/crc32.h> | |
| #include <linux/delay.h> | |
| #include <linux/bitops.h> | |
| #include <asm/processor.h> /* Processor type for cache alignment. */ | |
| #include <asm/io.h> | |
| #include <asm/uaccess.h> | |
| /* These identify the driver base version and may not be removed. */ | |
| static char version[] = | |
| KERN_INFO DRV_NAME ".c:v" DRV_VERSION " " DRV_RELDATE "\n"; | |
| /* This driver was written to use PCI memory space, however some x86 systems | |
| work only with I/O space accesses. */ | |
| #ifndef __alpha__ | |
| #define USE_IO_OPS | |
| #endif | |
| /* Kernel compatibility defines, some common to David Hinds' PCMCIA package. */ | |
| /* This is only in the support-all-kernels source code. */ | |
| #define RUN_AT(x) (jiffies + (x)) | |
| MODULE_AUTHOR("Myson or whoever"); | |
| MODULE_DESCRIPTION("Myson MTD-8xx 100/10M Ethernet PCI Adapter Driver"); | |
| MODULE_LICENSE("GPL"); | |
| module_param(max_interrupt_work, int, 0); | |
| module_param(debug, int, 0); | |
| module_param(rx_copybreak, int, 0); | |
| module_param(multicast_filter_limit, int, 0); | |
| module_param_array(options, int, NULL, 0); | |
| module_param_array(full_duplex, int, NULL, 0); | |
| MODULE_PARM_DESC(max_interrupt_work, "fealnx maximum events handled per interrupt"); | |
| MODULE_PARM_DESC(debug, "fealnx enable debugging (0-1)"); | |
| MODULE_PARM_DESC(rx_copybreak, "fealnx copy breakpoint for copy-only-tiny-frames"); | |
| MODULE_PARM_DESC(multicast_filter_limit, "fealnx maximum number of filtered multicast addresses"); | |
| MODULE_PARM_DESC(options, "fealnx: Bits 0-3: media type, bit 17: full duplex"); | |
| MODULE_PARM_DESC(full_duplex, "fealnx full duplex setting(s) (1)"); | |
| enum { | |
| MIN_REGION_SIZE = 136, | |
| }; | |
| /* A chip capabilities table, matching the entries in pci_tbl[] above. */ | |
| enum chip_capability_flags { | |
| HAS_MII_XCVR, | |
| HAS_CHIP_XCVR, | |
| }; | |
| /* 89/6/13 add, */ | |
| /* for different PHY */ | |
| enum phy_type_flags { | |
| MysonPHY = 1, | |
| AhdocPHY = 2, | |
| SeeqPHY = 3, | |
| MarvellPHY = 4, | |
| Myson981 = 5, | |
| LevelOnePHY = 6, | |
| OtherPHY = 10, | |
| }; | |
| struct chip_info { | |
| char *chip_name; | |
| int flags; | |
| }; | |
| static const struct chip_info skel_netdrv_tbl[] __devinitdata = { | |
| { "100/10M Ethernet PCI Adapter", HAS_MII_XCVR }, | |
| { "100/10M Ethernet PCI Adapter", HAS_CHIP_XCVR }, | |
| { "1000/100/10M Ethernet PCI Adapter", HAS_MII_XCVR }, | |
| }; | |
| /* Offsets to the Command and Status Registers. */ | |
| enum fealnx_offsets { | |
| PAR0 = 0x0, /* physical address 0-3 */ | |
| PAR1 = 0x04, /* physical address 4-5 */ | |
| MAR0 = 0x08, /* multicast address 0-3 */ | |
| MAR1 = 0x0C, /* multicast address 4-7 */ | |
| FAR0 = 0x10, /* flow-control address 0-3 */ | |
| FAR1 = 0x14, /* flow-control address 4-5 */ | |
| TCRRCR = 0x18, /* receive & transmit configuration */ | |
| BCR = 0x1C, /* bus command */ | |
| TXPDR = 0x20, /* transmit polling demand */ | |
| RXPDR = 0x24, /* receive polling demand */ | |
| RXCWP = 0x28, /* receive current word pointer */ | |
| TXLBA = 0x2C, /* transmit list base address */ | |
| RXLBA = 0x30, /* receive list base address */ | |
| ISR = 0x34, /* interrupt status */ | |
| IMR = 0x38, /* interrupt mask */ | |
| FTH = 0x3C, /* flow control high/low threshold */ | |
| MANAGEMENT = 0x40, /* bootrom/eeprom and mii management */ | |
| TALLY = 0x44, /* tally counters for crc and mpa */ | |
| TSR = 0x48, /* tally counter for transmit status */ | |
| BMCRSR = 0x4c, /* basic mode control and status */ | |
| PHYIDENTIFIER = 0x50, /* phy identifier */ | |
| ANARANLPAR = 0x54, /* auto-negotiation advertisement and link | |
| partner ability */ | |
| ANEROCR = 0x58, /* auto-negotiation expansion and pci conf. */ | |
| BPREMRPSR = 0x5c, /* bypass & receive error mask and phy status */ | |
| }; | |
| /* Bits in the interrupt status/enable registers. */ | |
| /* The bits in the Intr Status/Enable registers, mostly interrupt sources. */ | |
| enum intr_status_bits { | |
| RFCON = 0x00020000, /* receive flow control xon packet */ | |
| RFCOFF = 0x00010000, /* receive flow control xoff packet */ | |
| LSCStatus = 0x00008000, /* link status change */ | |
| ANCStatus = 0x00004000, /* autonegotiation completed */ | |
| FBE = 0x00002000, /* fatal bus error */ | |
| FBEMask = 0x00001800, /* mask bit12-11 */ | |
| ParityErr = 0x00000000, /* parity error */ | |
| TargetErr = 0x00001000, /* target abort */ | |
| MasterErr = 0x00000800, /* master error */ | |
| TUNF = 0x00000400, /* transmit underflow */ | |
| ROVF = 0x00000200, /* receive overflow */ | |
| ETI = 0x00000100, /* transmit early int */ | |
| ERI = 0x00000080, /* receive early int */ | |
| CNTOVF = 0x00000040, /* counter overflow */ | |
| RBU = 0x00000020, /* receive buffer unavailable */ | |
| TBU = 0x00000010, /* transmit buffer unavilable */ | |
| TI = 0x00000008, /* transmit interrupt */ | |
| RI = 0x00000004, /* receive interrupt */ | |
| RxErr = 0x00000002, /* receive error */ | |
| }; | |
| /* Bits in the NetworkConfig register, W for writing, R for reading */ | |
| /* FIXME: some names are invented by me. Marked with (name?) */ | |
| /* If you have docs and know bit names, please fix 'em */ | |
| enum rx_mode_bits { | |
| CR_W_ENH = 0x02000000, /* enhanced mode (name?) */ | |
| CR_W_FD = 0x00100000, /* full duplex */ | |
| CR_W_PS10 = 0x00080000, /* 10 mbit */ | |
| CR_W_TXEN = 0x00040000, /* tx enable (name?) */ | |
| CR_W_PS1000 = 0x00010000, /* 1000 mbit */ | |
| /* CR_W_RXBURSTMASK= 0x00000e00, Im unsure about this */ | |
| CR_W_RXMODEMASK = 0x000000e0, | |
| CR_W_PROM = 0x00000080, /* promiscuous mode */ | |
| CR_W_AB = 0x00000040, /* accept broadcast */ | |
| CR_W_AM = 0x00000020, /* accept mutlicast */ | |
| CR_W_ARP = 0x00000008, /* receive runt pkt */ | |
| CR_W_ALP = 0x00000004, /* receive long pkt */ | |
| CR_W_SEP = 0x00000002, /* receive error pkt */ | |
| CR_W_RXEN = 0x00000001, /* rx enable (unicast?) (name?) */ | |
| CR_R_TXSTOP = 0x04000000, /* tx stopped (name?) */ | |
| CR_R_FD = 0x00100000, /* full duplex detected */ | |
| CR_R_PS10 = 0x00080000, /* 10 mbit detected */ | |
| CR_R_RXSTOP = 0x00008000, /* rx stopped (name?) */ | |
| }; | |
| /* The Tulip Rx and Tx buffer descriptors. */ | |
| struct fealnx_desc { | |
| s32 status; | |
| s32 control; | |
| u32 buffer; | |
| u32 next_desc; | |
| struct fealnx_desc *next_desc_logical; | |
| struct sk_buff *skbuff; | |
| u32 reserved1; | |
| u32 reserved2; | |
| }; | |
| /* Bits in network_desc.status */ | |
| enum rx_desc_status_bits { | |
| RXOWN = 0x80000000, /* own bit */ | |
| FLNGMASK = 0x0fff0000, /* frame length */ | |
| FLNGShift = 16, | |
| MARSTATUS = 0x00004000, /* multicast address received */ | |
| BARSTATUS = 0x00002000, /* broadcast address received */ | |
| PHYSTATUS = 0x00001000, /* physical address received */ | |
| RXFSD = 0x00000800, /* first descriptor */ | |
| RXLSD = 0x00000400, /* last descriptor */ | |
| ErrorSummary = 0x80, /* error summary */ | |
| RUNT = 0x40, /* runt packet received */ | |
| LONG = 0x20, /* long packet received */ | |
| FAE = 0x10, /* frame align error */ | |
| CRC = 0x08, /* crc error */ | |
| RXER = 0x04, /* receive error */ | |
| }; | |
| enum rx_desc_control_bits { | |
| RXIC = 0x00800000, /* interrupt control */ | |
| RBSShift = 0, | |
| }; | |
| enum tx_desc_status_bits { | |
| TXOWN = 0x80000000, /* own bit */ | |
| JABTO = 0x00004000, /* jabber timeout */ | |
| CSL = 0x00002000, /* carrier sense lost */ | |
| LC = 0x00001000, /* late collision */ | |
| EC = 0x00000800, /* excessive collision */ | |
| UDF = 0x00000400, /* fifo underflow */ | |
| DFR = 0x00000200, /* deferred */ | |
| HF = 0x00000100, /* heartbeat fail */ | |
| NCRMask = 0x000000ff, /* collision retry count */ | |
| NCRShift = 0, | |
| }; | |
| enum tx_desc_control_bits { | |
| TXIC = 0x80000000, /* interrupt control */ | |
| ETIControl = 0x40000000, /* early transmit interrupt */ | |
| TXLD = 0x20000000, /* last descriptor */ | |
| TXFD = 0x10000000, /* first descriptor */ | |
| CRCEnable = 0x08000000, /* crc control */ | |
| PADEnable = 0x04000000, /* padding control */ | |
| RetryTxLC = 0x02000000, /* retry late collision */ | |
| PKTSMask = 0x3ff800, /* packet size bit21-11 */ | |
| PKTSShift = 11, | |
| TBSMask = 0x000007ff, /* transmit buffer bit 10-0 */ | |
| TBSShift = 0, | |
| }; | |
| /* BootROM/EEPROM/MII Management Register */ | |
| #define MASK_MIIR_MII_READ 0x00000000 | |
| #define MASK_MIIR_MII_WRITE 0x00000008 | |
| #define MASK_MIIR_MII_MDO 0x00000004 | |
| #define MASK_MIIR_MII_MDI 0x00000002 | |
| #define MASK_MIIR_MII_MDC 0x00000001 | |
| /* ST+OP+PHYAD+REGAD+TA */ | |
| #define OP_READ 0x6000 /* ST:01+OP:10+PHYAD+REGAD+TA:Z0 */ | |
| #define OP_WRITE 0x5002 /* ST:01+OP:01+PHYAD+REGAD+TA:10 */ | |
| /* ------------------------------------------------------------------------- */ | |
| /* Constants for Myson PHY */ | |
| /* ------------------------------------------------------------------------- */ | |
| #define MysonPHYID 0xd0000302 | |
| /* 89-7-27 add, (begin) */ | |
| #define MysonPHYID0 0x0302 | |
| #define StatusRegister 18 | |
| #define SPEED100 0x0400 // bit10 | |
| #define FULLMODE 0x0800 // bit11 | |
| /* 89-7-27 add, (end) */ | |
| /* ------------------------------------------------------------------------- */ | |
| /* Constants for Seeq 80225 PHY */ | |
| /* ------------------------------------------------------------------------- */ | |
| #define SeeqPHYID0 0x0016 | |
| #define MIIRegister18 18 | |
| #define SPD_DET_100 0x80 | |
| #define DPLX_DET_FULL 0x40 | |
| /* ------------------------------------------------------------------------- */ | |
| /* Constants for Ahdoc 101 PHY */ | |
| /* ------------------------------------------------------------------------- */ | |
| #define AhdocPHYID0 0x0022 | |
| #define DiagnosticReg 18 | |
| #define DPLX_FULL 0x0800 | |
| #define Speed_100 0x0400 | |
| /* 89/6/13 add, */ | |
| /* -------------------------------------------------------------------------- */ | |
| /* Constants */ | |
| /* -------------------------------------------------------------------------- */ | |
| #define MarvellPHYID0 0x0141 | |
| #define LevelOnePHYID0 0x0013 | |
| #define MII1000BaseTControlReg 9 | |
| #define MII1000BaseTStatusReg 10 | |
| #define SpecificReg 17 | |
| /* for 1000BaseT Control Register */ | |
| #define PHYAbletoPerform1000FullDuplex 0x0200 | |
| #define PHYAbletoPerform1000HalfDuplex 0x0100 | |
| #define PHY1000AbilityMask 0x300 | |
| // for phy specific status register, marvell phy. | |
| #define SpeedMask 0x0c000 | |
| #define Speed_1000M 0x08000 | |
| #define Speed_100M 0x4000 | |
| #define Speed_10M 0 | |
| #define Full_Duplex 0x2000 | |
| // 89/12/29 add, for phy specific status register, levelone phy, (begin) | |
| #define LXT1000_100M 0x08000 | |
| #define LXT1000_1000M 0x0c000 | |
| #define LXT1000_Full 0x200 | |
| // 89/12/29 add, for phy specific status register, levelone phy, (end) | |
| /* for 3-in-1 case, BMCRSR register */ | |
| #define LinkIsUp2 0x00040000 | |
| /* for PHY */ | |
| #define LinkIsUp 0x0004 | |
| struct netdev_private { | |
| /* Descriptor rings first for alignment. */ | |
| struct fealnx_desc *rx_ring; | |
| struct fealnx_desc *tx_ring; | |
| dma_addr_t rx_ring_dma; | |
| dma_addr_t tx_ring_dma; | |
| spinlock_t lock; | |
| struct net_device_stats stats; | |
| /* Media monitoring timer. */ | |
| struct timer_list timer; | |
| /* Reset timer */ | |
| struct timer_list reset_timer; | |
| int reset_timer_armed; | |
| unsigned long crvalue_sv; | |
| unsigned long imrvalue_sv; | |
| /* Frequently used values: keep some adjacent for cache effect. */ | |
| int flags; | |
| struct pci_dev *pci_dev; | |
| unsigned long crvalue; | |
| unsigned long bcrvalue; | |
| unsigned long imrvalue; | |
| struct fealnx_desc *cur_rx; | |
| struct fealnx_desc *lack_rxbuf; | |
| int really_rx_count; | |
| struct fealnx_desc *cur_tx; | |
| struct fealnx_desc *cur_tx_copy; | |
| int really_tx_count; | |
| int free_tx_count; | |
| unsigned int rx_buf_sz; /* Based on MTU+slack. */ | |
| /* These values are keep track of the transceiver/media in use. */ | |
| unsigned int linkok; | |
| unsigned int line_speed; | |
| unsigned int duplexmode; | |
| unsigned int default_port:4; /* Last dev->if_port value. */ | |
| unsigned int PHYType; | |
| /* MII transceiver section. */ | |
| int mii_cnt; /* MII device addresses. */ | |
| unsigned char phys[2]; /* MII device addresses. */ | |
| struct mii_if_info mii; | |
| void __iomem *mem; | |
| }; | |
| static int mdio_read(struct net_device *dev, int phy_id, int location); | |
| static void mdio_write(struct net_device *dev, int phy_id, int location, int value); | |
| static int netdev_open(struct net_device *dev); | |
| static void getlinktype(struct net_device *dev); | |
| static void getlinkstatus(struct net_device *dev); | |
| static void netdev_timer(unsigned long data); | |
| static void reset_timer(unsigned long data); | |
| static void tx_timeout(struct net_device *dev); | |
| static void init_ring(struct net_device *dev); | |
| static int start_tx(struct sk_buff *skb, struct net_device *dev); | |
| static irqreturn_t intr_handler(int irq, void *dev_instance); | |
| static int netdev_rx(struct net_device *dev); | |
| static void set_rx_mode(struct net_device *dev); | |
| static void __set_rx_mode(struct net_device *dev); | |
| static struct net_device_stats *get_stats(struct net_device *dev); | |
| static int mii_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); | |
| static const struct ethtool_ops netdev_ethtool_ops; | |
| static int netdev_close(struct net_device *dev); | |
| static void reset_rx_descriptors(struct net_device *dev); | |
| static void reset_tx_descriptors(struct net_device *dev); | |
| static void stop_nic_rx(void __iomem *ioaddr, long crvalue) | |
| { | |
| int delay = 0x1000; | |
| iowrite32(crvalue & ~(CR_W_RXEN), ioaddr + TCRRCR); | |
| while (--delay) { | |
| if ( (ioread32(ioaddr + TCRRCR) & CR_R_RXSTOP) == CR_R_RXSTOP) | |
| break; | |
| } | |
| } | |
| static void stop_nic_rxtx(void __iomem *ioaddr, long crvalue) | |
| { | |
| int delay = 0x1000; | |
| iowrite32(crvalue & ~(CR_W_RXEN+CR_W_TXEN), ioaddr + TCRRCR); | |
| while (--delay) { | |
| if ( (ioread32(ioaddr + TCRRCR) & (CR_R_RXSTOP+CR_R_TXSTOP)) | |
| == (CR_R_RXSTOP+CR_R_TXSTOP) ) | |
| break; | |
| } | |
| } | |
| static int __devinit fealnx_init_one(struct pci_dev *pdev, | |
| const struct pci_device_id *ent) | |
| { | |
| struct netdev_private *np; | |
| int i, option, err, irq; | |
| static int card_idx = -1; | |
| char boardname[12]; | |
| void __iomem *ioaddr; | |
| unsigned long len; | |
| unsigned int chip_id = ent->driver_data; | |
| struct net_device *dev; | |
| void *ring_space; | |
| dma_addr_t ring_dma; | |
| #ifdef USE_IO_OPS | |
| int bar = 0; | |
| #else | |
| int bar = 1; | |
| #endif | |
| DECLARE_MAC_BUF(mac); | |
| /* when built into the kernel, we only print version if device is found */ | |
| #ifndef MODULE | |
| static int printed_version; | |
| if (!printed_version++) | |
| printk(version); | |
| #endif | |
| card_idx++; | |
| sprintf(boardname, "fealnx%d", card_idx); | |
| option = card_idx < MAX_UNITS ? options[card_idx] : 0; | |
| i = pci_enable_device(pdev); | |
| if (i) return i; | |
| pci_set_master(pdev); | |
| len = pci_resource_len(pdev, bar); | |
| if (len < MIN_REGION_SIZE) { | |
| dev_err(&pdev->dev, | |
| "region size %ld too small, aborting\n", len); | |
| return -ENODEV; | |
| } | |
| i = pci_request_regions(pdev, boardname); | |
| if (i) | |
| return i; | |
| irq = pdev->irq; | |
| ioaddr = pci_iomap(pdev, bar, len); | |
| if (!ioaddr) { | |
| err = -ENOMEM; | |
| goto err_out_res; | |
| } | |
| dev = alloc_etherdev(sizeof(struct netdev_private)); | |
| if (!dev) { | |
| err = -ENOMEM; | |
| goto err_out_unmap; | |
| } | |
| SET_NETDEV_DEV(dev, &pdev->dev); | |
| /* read ethernet id */ | |
| for (i = 0; i < 6; ++i) | |
| dev->dev_addr[i] = ioread8(ioaddr + PAR0 + i); | |
| /* Reset the chip to erase previous misconfiguration. */ | |
| iowrite32(0x00000001, ioaddr + BCR); | |
| dev->base_addr = (unsigned long)ioaddr; | |
| dev->irq = irq; | |
| /* Make certain the descriptor lists are aligned. */ | |
| np = netdev_priv(dev); | |
| np->mem = ioaddr; | |
| spin_lock_init(&np->lock); | |
| np->pci_dev = pdev; | |
| np->flags = skel_netdrv_tbl[chip_id].flags; | |
| pci_set_drvdata(pdev, dev); | |
| np->mii.dev = dev; | |
| np->mii.mdio_read = mdio_read; | |
| np->mii.mdio_write = mdio_write; | |
| np->mii.phy_id_mask = 0x1f; | |
| np->mii.reg_num_mask = 0x1f; | |
| ring_space = pci_alloc_consistent(pdev, RX_TOTAL_SIZE, &ring_dma); | |
| if (!ring_space) { | |
| err = -ENOMEM; | |
| goto err_out_free_dev; | |
| } | |
| np->rx_ring = (struct fealnx_desc *)ring_space; | |
| np->rx_ring_dma = ring_dma; | |
| ring_space = pci_alloc_consistent(pdev, TX_TOTAL_SIZE, &ring_dma); | |
| if (!ring_space) { | |
| err = -ENOMEM; | |
| goto err_out_free_rx; | |
| } | |
| np->tx_ring = (struct fealnx_desc *)ring_space; | |
| np->tx_ring_dma = ring_dma; | |
| /* find the connected MII xcvrs */ | |
| if (np->flags == HAS_MII_XCVR) { | |
| int phy, phy_idx = 0; | |
| for (phy = 1; phy < 32 && phy_idx < 4; phy++) { | |
| int mii_status = mdio_read(dev, phy, 1); | |
| if (mii_status != 0xffff && mii_status != 0x0000) { | |
| np->phys[phy_idx++] = phy; | |
| dev_info(&pdev->dev, | |
| "MII PHY found at address %d, status " | |
| "0x%4.4x.\n", phy, mii_status); | |
| /* get phy type */ | |
| { | |
| unsigned int data; | |
| data = mdio_read(dev, np->phys[0], 2); | |
| if (data == SeeqPHYID0) | |
| np->PHYType = SeeqPHY; | |
| else if (data == AhdocPHYID0) | |
| np->PHYType = AhdocPHY; | |
| else if (data == MarvellPHYID0) | |
| np->PHYType = MarvellPHY; | |
| else if (data == MysonPHYID0) | |
| np->PHYType = Myson981; | |
| else if (data == LevelOnePHYID0) | |
| np->PHYType = LevelOnePHY; | |
| else | |
| np->PHYType = OtherPHY; | |
| } | |
| } | |
| } | |
| np->mii_cnt = phy_idx; | |
| if (phy_idx == 0) | |
| dev_warn(&pdev->dev, | |
| "MII PHY not found -- this device may " | |
| "not operate correctly.\n"); | |
| } else { | |
| np->phys[0] = 32; | |
| /* 89/6/23 add, (begin) */ | |
| /* get phy type */ | |
| if (ioread32(ioaddr + PHYIDENTIFIER) == MysonPHYID) | |
| np->PHYType = MysonPHY; | |
| else | |
| np->PHYType = OtherPHY; | |
| } | |
| np->mii.phy_id = np->phys[0]; | |
| if (dev->mem_start) | |
| option = dev->mem_start; | |
| /* The lower four bits are the media type. */ | |
| if (option > 0) { | |
| if (option & 0x200) | |
| np->mii.full_duplex = 1; | |
| np->default_port = option & 15; | |
| } | |
| if (card_idx < MAX_UNITS && full_duplex[card_idx] > 0) | |
| np->mii.full_duplex = full_duplex[card_idx]; | |
| if (np->mii.full_duplex) { | |
| dev_info(&pdev->dev, "Media type forced to Full Duplex.\n"); | |
| /* 89/6/13 add, (begin) */ | |
| // if (np->PHYType==MarvellPHY) | |
| if ((np->PHYType == MarvellPHY) || (np->PHYType == LevelOnePHY)) { | |
| unsigned int data; | |
| data = mdio_read(dev, np->phys[0], 9); | |
| data = (data & 0xfcff) | 0x0200; | |
| mdio_write(dev, np->phys[0], 9, data); | |
| } | |
| /* 89/6/13 add, (end) */ | |
| if (np->flags == HAS_MII_XCVR) | |
| mdio_write(dev, np->phys[0], MII_ADVERTISE, ADVERTISE_FULL); | |
| else | |
| iowrite32(ADVERTISE_FULL, ioaddr + ANARANLPAR); | |
| np->mii.force_media = 1; | |
| } | |
| /* The chip-specific entries in the device structure. */ | |
| dev->open = &netdev_open; | |
| dev->hard_start_xmit = &start_tx; | |
| dev->stop = &netdev_close; | |
| dev->get_stats = &get_stats; | |
| dev->set_multicast_list = &set_rx_mode; | |
| dev->do_ioctl = &mii_ioctl; | |
| dev->ethtool_ops = &netdev_ethtool_ops; | |
| dev->tx_timeout = &tx_timeout; | |
| dev->watchdog_timeo = TX_TIMEOUT; | |
| err = register_netdev(dev); | |
| if (err) | |
| goto err_out_free_tx; | |
| printk(KERN_INFO "%s: %s at %p, %s, IRQ %d.\n", | |
| dev->name, skel_netdrv_tbl[chip_id].chip_name, ioaddr, | |
| print_mac(mac, dev->dev_addr), irq); | |
| return 0; | |
| err_out_free_tx: | |
| pci_free_consistent(pdev, TX_TOTAL_SIZE, np->tx_ring, np->tx_ring_dma); | |
| err_out_free_rx: | |
| pci_free_consistent(pdev, RX_TOTAL_SIZE, np->rx_ring, np->rx_ring_dma); | |
| err_out_free_dev: | |
| free_netdev(dev); | |
| err_out_unmap: | |
| pci_iounmap(pdev, ioaddr); | |
| err_out_res: | |
| pci_release_regions(pdev); | |
| return err; | |
| } | |
| static void __devexit fealnx_remove_one(struct pci_dev *pdev) | |
| { | |
| struct net_device *dev = pci_get_drvdata(pdev); | |
| if (dev) { | |
| struct netdev_private *np = netdev_priv(dev); | |
| pci_free_consistent(pdev, TX_TOTAL_SIZE, np->tx_ring, | |
| np->tx_ring_dma); | |
| pci_free_consistent(pdev, RX_TOTAL_SIZE, np->rx_ring, | |
| np->rx_ring_dma); | |
| unregister_netdev(dev); | |
| pci_iounmap(pdev, np->mem); | |
| free_netdev(dev); | |
| pci_release_regions(pdev); | |
| pci_set_drvdata(pdev, NULL); | |
| } else | |
| printk(KERN_ERR "fealnx: remove for unknown device\n"); | |
| } | |
| static ulong m80x_send_cmd_to_phy(void __iomem *miiport, int opcode, int phyad, int regad) | |
| { | |
| ulong miir; | |
| int i; | |
| unsigned int mask, data; | |
| /* enable MII output */ | |
| miir = (ulong) ioread32(miiport); | |
| miir &= 0xfffffff0; | |
| miir |= MASK_MIIR_MII_WRITE + MASK_MIIR_MII_MDO; | |
| /* send 32 1's preamble */ | |
| for (i = 0; i < 32; i++) { | |
| /* low MDC; MDO is already high (miir) */ | |
| miir &= ~MASK_MIIR_MII_MDC; | |
| iowrite32(miir, miiport); | |
| /* high MDC */ | |
| miir |= MASK_MIIR_MII_MDC; | |
| iowrite32(miir, miiport); | |
| } | |
| /* calculate ST+OP+PHYAD+REGAD+TA */ | |
| data = opcode | (phyad << 7) | (regad << 2); | |
| /* sent out */ | |
| mask = 0x8000; | |
| while (mask) { | |
| /* low MDC, prepare MDO */ | |
| miir &= ~(MASK_MIIR_MII_MDC + MASK_MIIR_MII_MDO); | |
| if (mask & data) | |
| miir |= MASK_MIIR_MII_MDO; | |
| iowrite32(miir, miiport); | |
| /* high MDC */ | |
| miir |= MASK_MIIR_MII_MDC; | |
| iowrite32(miir, miiport); | |
| udelay(30); | |
| /* next */ | |
| mask >>= 1; | |
| if (mask == 0x2 && opcode == OP_READ) | |
| miir &= ~MASK_MIIR_MII_WRITE; | |
| } | |
| return miir; | |
| } | |
| static int mdio_read(struct net_device *dev, int phyad, int regad) | |
| { | |
| struct netdev_private *np = netdev_priv(dev); | |
| void __iomem *miiport = np->mem + MANAGEMENT; | |
| ulong miir; | |
| unsigned int mask, data; | |
| miir = m80x_send_cmd_to_phy(miiport, OP_READ, phyad, regad); | |
| /* read data */ | |
| mask = 0x8000; | |
| data = 0; | |
| while (mask) { | |
| /* low MDC */ | |
| miir &= ~MASK_MIIR_MII_MDC; | |
| iowrite32(miir, miiport); | |
| /* read MDI */ | |
| miir = ioread32(miiport); | |
| if (miir & MASK_MIIR_MII_MDI) | |
| data |= mask; | |
| /* high MDC, and wait */ | |
| miir |= MASK_MIIR_MII_MDC; | |
| iowrite32(miir, miiport); | |
| udelay(30); | |
| /* next */ | |
| mask >>= 1; | |
| } | |
| /* low MDC */ | |
| miir &= ~MASK_MIIR_MII_MDC; | |
| iowrite32(miir, miiport); | |
| return data & 0xffff; | |
| } | |
| static void mdio_write(struct net_device *dev, int phyad, int regad, int data) | |
| { | |
| struct netdev_private *np = netdev_priv(dev); | |
| void __iomem *miiport = np->mem + MANAGEMENT; | |
| ulong miir; | |
| unsigned int mask; | |
| miir = m80x_send_cmd_to_phy(miiport, OP_WRITE, phyad, regad); | |
| /* write data */ | |
| mask = 0x8000; | |
| while (mask) { | |
| /* low MDC, prepare MDO */ | |
| miir &= ~(MASK_MIIR_MII_MDC + MASK_MIIR_MII_MDO); | |
| if (mask & data) | |
| miir |= MASK_MIIR_MII_MDO; | |
| iowrite32(miir, miiport); | |
| /* high MDC */ | |
| miir |= MASK_MIIR_MII_MDC; | |
| iowrite32(miir, miiport); | |
| /* next */ | |
| mask >>= 1; | |
| } | |
| /* low MDC */ | |
| miir &= ~MASK_MIIR_MII_MDC; | |
| iowrite32(miir, miiport); | |
| } | |
| static int netdev_open(struct net_device *dev) | |
| { | |
| struct netdev_private *np = netdev_priv(dev); | |
| void __iomem *ioaddr = np->mem; | |
| int i; | |
| iowrite32(0x00000001, ioaddr + BCR); /* Reset */ | |
| if (request_irq(dev->irq, &intr_handler, IRQF_SHARED, dev->name, dev)) | |
| return -EAGAIN; | |
| for (i = 0; i < 3; i++) | |
| iowrite16(((unsigned short*)dev->dev_addr)[i], | |
| ioaddr + PAR0 + i*2); | |
| init_ring(dev); | |
| iowrite32(np->rx_ring_dma, ioaddr + RXLBA); | |
| iowrite32(np->tx_ring_dma, ioaddr + TXLBA); | |
| /* Initialize other registers. */ | |
| /* Configure the PCI bus bursts and FIFO thresholds. | |
| 486: Set 8 longword burst. | |
| 586: no burst limit. | |
| Burst length 5:3 | |
| 0 0 0 1 | |
| 0 0 1 4 | |
| 0 1 0 8 | |
| 0 1 1 16 | |
| 1 0 0 32 | |
| 1 0 1 64 | |
| 1 1 0 128 | |
| 1 1 1 256 | |
| Wait the specified 50 PCI cycles after a reset by initializing | |
| Tx and Rx queues and the address filter list. | |
| FIXME (Ueimor): optimistic for alpha + posted writes ? */ | |
| #if defined(__powerpc__) || defined(__sparc__) | |
| // 89/9/1 modify, | |
| // np->bcrvalue=0x04 | 0x0x38; /* big-endian, 256 burst length */ | |
| np->bcrvalue = 0x04 | 0x10; /* big-endian, tx 8 burst length */ | |
| np->crvalue = 0xe00; /* rx 128 burst length */ | |
| #elif defined(__alpha__) || defined(__x86_64__) | |
| // 89/9/1 modify, | |
| // np->bcrvalue=0x38; /* little-endian, 256 burst length */ | |
| np->bcrvalue = 0x10; /* little-endian, 8 burst length */ | |
| np->crvalue = 0xe00; /* rx 128 burst length */ | |
| #elif defined(__i386__) | |
| #if defined(MODULE) | |
| // 89/9/1 modify, | |
| // np->bcrvalue=0x38; /* little-endian, 256 burst length */ | |
| np->bcrvalue = 0x10; /* little-endian, 8 burst length */ | |
| np->crvalue = 0xe00; /* rx 128 burst length */ | |
| #else | |
| /* When not a module we can work around broken '486 PCI boards. */ | |
| #define x86 boot_cpu_data.x86 | |
| // 89/9/1 modify, | |
| // np->bcrvalue=(x86 <= 4 ? 0x10 : 0x38); | |
| np->bcrvalue = 0x10; | |
| np->crvalue = (x86 <= 4 ? 0xa00 : 0xe00); | |
| if (x86 <= 4) | |
| printk(KERN_INFO "%s: This is a 386/486 PCI system, setting burst " | |
| "length to %x.\n", dev->name, (x86 <= 4 ? 0x10 : 0x38)); | |
| #endif | |
| #else | |
| // 89/9/1 modify, | |
| // np->bcrvalue=0x38; | |
| np->bcrvalue = 0x10; | |
| np->crvalue = 0xe00; /* rx 128 burst length */ | |
| #warning Processor architecture undefined! | |
| #endif | |
| // 89/12/29 add, | |
| // 90/1/16 modify, | |
| // np->imrvalue=FBE|TUNF|CNTOVF|RBU|TI|RI; | |
| np->imrvalue = TUNF | CNTOVF | RBU | TI | RI; | |
| if (np->pci_dev->device == 0x891) { | |
| np->bcrvalue |= 0x200; /* set PROG bit */ | |
| np->crvalue |= CR_W_ENH; /* set enhanced bit */ | |
| np->imrvalue |= ETI; | |
| } | |
| iowrite32(np->bcrvalue, ioaddr + BCR); | |
| if (dev->if_port == 0) | |
| dev->if_port = np->default_port; | |
| iowrite32(0, ioaddr + RXPDR); | |
| // 89/9/1 modify, | |
| // np->crvalue = 0x00e40001; /* tx store and forward, tx/rx enable */ | |
| np->crvalue |= 0x00e40001; /* tx store and forward, tx/rx enable */ | |
| np->mii.full_duplex = np->mii.force_media; | |
| getlinkstatus(dev); | |
| if (np->linkok) | |
| getlinktype(dev); | |
| __set_rx_mode(dev); | |
| netif_start_queue(dev); | |
| /* Clear and Enable interrupts by setting the interrupt mask. */ | |
| iowrite32(FBE | TUNF | CNTOVF | RBU | TI | RI, ioaddr + ISR); | |
| iowrite32(np->imrvalue, ioaddr + IMR); | |
| if (debug) | |
| printk(KERN_DEBUG "%s: Done netdev_open().\n", dev->name); | |
| /* Set the timer to check for link beat. */ | |
| init_timer(&np->timer); | |
| np->timer.expires = RUN_AT(3 * HZ); | |
| np->timer.data = (unsigned long) dev; | |
| np->timer.function = &netdev_timer; | |
| /* timer handler */ | |
| add_timer(&np->timer); | |
| init_timer(&np->reset_timer); | |
| np->reset_timer.data = (unsigned long) dev; | |
| np->reset_timer.function = &reset_timer; | |
| np->reset_timer_armed = 0; | |
| return 0; | |
| } | |
| static void getlinkstatus(struct net_device *dev) | |
| /* function: Routine will read MII Status Register to get link status. */ | |
| /* input : dev... pointer to the adapter block. */ | |
| /* output : none. */ | |
| { | |
| struct netdev_private *np = netdev_priv(dev); | |
| unsigned int i, DelayTime = 0x1000; | |
| np->linkok = 0; | |
| if (np->PHYType == MysonPHY) { | |
| for (i = 0; i < DelayTime; ++i) { | |
| if (ioread32(np->mem + BMCRSR) & LinkIsUp2) { | |
| np->linkok = 1; | |
| return; | |
| } | |
| udelay(100); | |
| } | |
| } else { | |
| for (i = 0; i < DelayTime; ++i) { | |
| if (mdio_read(dev, np->phys[0], MII_BMSR) & BMSR_LSTATUS) { | |
| np->linkok = 1; | |
| return; | |
| } | |
| udelay(100); | |
| } | |
| } | |
| } | |
| static void getlinktype(struct net_device *dev) | |
| { | |
| struct netdev_private *np = netdev_priv(dev); | |
| if (np->PHYType == MysonPHY) { /* 3-in-1 case */ | |
| if (ioread32(np->mem + TCRRCR) & CR_R_FD) | |
| np->duplexmode = 2; /* full duplex */ | |
| else | |
| np->duplexmode = 1; /* half duplex */ | |
| if (ioread32(np->mem + TCRRCR) & CR_R_PS10) | |
| np->line_speed = 1; /* 10M */ | |
| else | |
| np->line_speed = 2; /* 100M */ | |
| } else { | |
| if (np->PHYType == SeeqPHY) { /* this PHY is SEEQ 80225 */ | |
| unsigned int data; | |
| data = mdio_read(dev, np->phys[0], MIIRegister18); | |
| if (data & SPD_DET_100) | |
| np->line_speed = 2; /* 100M */ | |
| else | |
| np->line_speed = 1; /* 10M */ | |
| if (data & DPLX_DET_FULL) | |
| np->duplexmode = 2; /* full duplex mode */ | |
| else | |
| np->duplexmode = 1; /* half duplex mode */ | |
| } else if (np->PHYType == AhdocPHY) { | |
| unsigned int data; | |
| data = mdio_read(dev, np->phys[0], DiagnosticReg); | |
| if (data & Speed_100) | |
| np->line_speed = 2; /* 100M */ | |
| else | |
| np->line_speed = 1; /* 10M */ | |
| if (data & DPLX_FULL) | |
| np->duplexmode = 2; /* full duplex mode */ | |
| else | |
| np->duplexmode = 1; /* half duplex mode */ | |
| } | |
| /* 89/6/13 add, (begin) */ | |
| else if (np->PHYType == MarvellPHY) { | |
| unsigned int data; | |
| data = mdio_read(dev, np->phys[0], SpecificReg); | |
| if (data & Full_Duplex) | |
| np->duplexmode = 2; /* full duplex mode */ | |
| else | |
| np->duplexmode = 1; /* half duplex mode */ | |
| data &= SpeedMask; | |
| if (data == Speed_1000M) | |
| np->line_speed = 3; /* 1000M */ | |
| else if (data == Speed_100M) | |
| np->line_speed = 2; /* 100M */ | |
| else | |
| np->line_speed = 1; /* 10M */ | |
| } | |
| /* 89/6/13 add, (end) */ | |
| /* 89/7/27 add, (begin) */ | |
| else if (np->PHYType == Myson981) { | |
| unsigned int data; | |
| data = mdio_read(dev, np->phys[0], StatusRegister); | |
| if (data & SPEED100) | |
| np->line_speed = 2; | |
| else | |
| np->line_speed = 1; | |
| if (data & FULLMODE) | |
| np->duplexmode = 2; | |
| else | |
| np->duplexmode = 1; | |
| } | |
| /* 89/7/27 add, (end) */ | |
| /* 89/12/29 add */ | |
| else if (np->PHYType == LevelOnePHY) { | |
| unsigned int data; | |
| data = mdio_read(dev, np->phys[0], SpecificReg); | |
| if (data & LXT1000_Full) | |
| np->duplexmode = 2; /* full duplex mode */ | |
| else | |
| np->duplexmode = 1; /* half duplex mode */ | |
| data &= SpeedMask; | |
| if (data == LXT1000_1000M) | |
| np->line_speed = 3; /* 1000M */ | |
| else if (data == LXT1000_100M) | |
| np->line_speed = 2; /* 100M */ | |
| else | |
| np->line_speed = 1; /* 10M */ | |
| } | |
| np->crvalue &= (~CR_W_PS10) & (~CR_W_FD) & (~CR_W_PS1000); | |
| if (np->line_speed == 1) | |
| np->crvalue |= CR_W_PS10; | |
| else if (np->line_speed == 3) | |
| np->crvalue |= CR_W_PS1000; | |
| if (np->duplexmode == 2) | |
| np->crvalue |= CR_W_FD; | |
| } | |
| } | |
| /* Take lock before calling this */ | |
| static void allocate_rx_buffers(struct net_device *dev) | |
| { | |
| struct netdev_private *np = netdev_priv(dev); | |
| /* allocate skb for rx buffers */ | |
| while (np->really_rx_count != RX_RING_SIZE) { | |
| struct sk_buff *skb; | |
| skb = dev_alloc_skb(np->rx_buf_sz); | |
| if (skb == NULL) | |
| break; /* Better luck next round. */ | |
| while (np->lack_rxbuf->skbuff) | |
| np->lack_rxbuf = np->lack_rxbuf->next_desc_logical; | |
| skb->dev = dev; /* Mark as being used by this device. */ | |
| np->lack_rxbuf->skbuff = skb; | |
| np->lack_rxbuf->buffer = pci_map_single(np->pci_dev, skb->data, | |
| np->rx_buf_sz, PCI_DMA_FROMDEVICE); | |
| np->lack_rxbuf->status = RXOWN; | |
| ++np->really_rx_count; | |
| } | |
| } | |
| static void netdev_timer(unsigned long data) | |
| { | |
| struct net_device *dev = (struct net_device *) data; | |
| struct netdev_private *np = netdev_priv(dev); | |
| void __iomem *ioaddr = np->mem; | |
| int old_crvalue = np->crvalue; | |
| unsigned int old_linkok = np->linkok; | |
| unsigned long flags; | |
| if (debug) | |
| printk(KERN_DEBUG "%s: Media selection timer tick, status %8.8x " | |
| "config %8.8x.\n", dev->name, ioread32(ioaddr + ISR), | |
| ioread32(ioaddr + TCRRCR)); | |
| spin_lock_irqsave(&np->lock, flags); | |
| if (np->flags == HAS_MII_XCVR) { | |
| getlinkstatus(dev); | |
| if ((old_linkok == 0) && (np->linkok == 1)) { /* we need to detect the media type again */ | |
| getlinktype(dev); | |
| if (np->crvalue != old_crvalue) { | |
| stop_nic_rxtx(ioaddr, np->crvalue); | |
| iowrite32(np->crvalue, ioaddr + TCRRCR); | |
| } | |
| } | |
| } | |
| allocate_rx_buffers(dev); | |
| spin_unlock_irqrestore(&np->lock, flags); | |
| np->timer.expires = RUN_AT(10 * HZ); | |
| add_timer(&np->timer); | |
| } | |
| /* Take lock before calling */ | |
| /* Reset chip and disable rx, tx and interrupts */ | |
| static void reset_and_disable_rxtx(struct net_device *dev) | |
| { | |
| struct netdev_private *np = netdev_priv(dev); | |
| void __iomem *ioaddr = np->mem; | |
| int delay=51; | |
| /* Reset the chip's Tx and Rx processes. */ | |
| stop_nic_rxtx(ioaddr, 0); | |
| /* Disable interrupts by clearing the interrupt mask. */ | |
| iowrite32(0, ioaddr + IMR); | |
| /* Reset the chip to erase previous misconfiguration. */ | |
| iowrite32(0x00000001, ioaddr + BCR); | |
| /* Ueimor: wait for 50 PCI cycles (and flush posted writes btw). | |
| We surely wait too long (address+data phase). Who cares? */ | |
| while (--delay) { | |
| ioread32(ioaddr + BCR); | |
| rmb(); | |
| } | |
| } | |
| /* Take lock before calling */ | |
| /* Restore chip after reset */ | |
| static void enable_rxtx(struct net_device *dev) | |
| { | |
| struct netdev_private *np = netdev_priv(dev); | |
| void __iomem *ioaddr = np->mem; | |
| reset_rx_descriptors(dev); | |
| iowrite32(np->tx_ring_dma + ((char*)np->cur_tx - (char*)np->tx_ring), | |
| ioaddr + TXLBA); | |
| iowrite32(np->rx_ring_dma + ((char*)np->cur_rx - (char*)np->rx_ring), | |
| ioaddr + RXLBA); | |
| iowrite32(np->bcrvalue, ioaddr + BCR); | |
| iowrite32(0, ioaddr + RXPDR); | |
| __set_rx_mode(dev); /* changes np->crvalue, writes it into TCRRCR */ | |
| /* Clear and Enable interrupts by setting the interrupt mask. */ | |
| iowrite32(FBE | TUNF | CNTOVF | RBU | TI | RI, ioaddr + ISR); | |
| iowrite32(np->imrvalue, ioaddr + IMR); | |
| iowrite32(0, ioaddr + TXPDR); | |
| } | |
| static void reset_timer(unsigned long data) | |
| { | |
| struct net_device *dev = (struct net_device *) data; | |
| struct netdev_private *np = netdev_priv(dev); | |
| unsigned long flags; | |
| printk(KERN_WARNING "%s: resetting tx and rx machinery\n", dev->name); | |
| spin_lock_irqsave(&np->lock, flags); | |
| np->crvalue = np->crvalue_sv; | |
| np->imrvalue = np->imrvalue_sv; | |
| reset_and_disable_rxtx(dev); | |
| /* works for me without this: | |
| reset_tx_descriptors(dev); */ | |
| enable_rxtx(dev); | |
| netif_start_queue(dev); /* FIXME: or netif_wake_queue(dev); ? */ | |
| np->reset_timer_armed = 0; | |
| spin_unlock_irqrestore(&np->lock, flags); | |
| } | |
| static void tx_timeout(struct net_device *dev) | |
| { | |
| struct netdev_private *np = netdev_priv(dev); | |
| void __iomem *ioaddr = np->mem; | |
| unsigned long flags; | |
| int i; | |
| printk(KERN_WARNING "%s: Transmit timed out, status %8.8x," | |
| " resetting...\n", dev->name, ioread32(ioaddr + ISR)); | |
| { | |
| printk(KERN_DEBUG " Rx ring %p: ", np->rx_ring); | |
| for (i = 0; i < RX_RING_SIZE; i++) | |
| printk(" %8.8x", (unsigned int) np->rx_ring[i].status); | |
| printk("\n" KERN_DEBUG " Tx ring %p: ", np->tx_ring); | |
| for (i = 0; i < TX_RING_SIZE; i++) | |
| printk(" %4.4x", np->tx_ring[i].status); | |
| printk("\n"); | |
| } | |
| spin_lock_irqsave(&np->lock, flags); | |
| reset_and_disable_rxtx(dev); | |
| reset_tx_descriptors(dev); | |
| enable_rxtx(dev); | |
| spin_unlock_irqrestore(&np->lock, flags); | |
| dev->trans_start = jiffies; | |
| np->stats.tx_errors++; | |
| netif_wake_queue(dev); /* or .._start_.. ?? */ | |
| } | |
| /* Initialize the Rx and Tx rings, along with various 'dev' bits. */ | |
| static void init_ring(struct net_device *dev) | |
| { | |
| struct netdev_private *np = netdev_priv(dev); | |
| int i; | |
| /* initialize rx variables */ | |
| np->rx_buf_sz = (dev->mtu <= 1500 ? PKT_BUF_SZ : dev->mtu + 32); | |
| np->cur_rx = &np->rx_ring[0]; | |
| np->lack_rxbuf = np->rx_ring; | |
| np->really_rx_count = 0; | |
| /* initial rx descriptors. */ | |
| for (i = 0; i < RX_RING_SIZE; i++) { | |
| np->rx_ring[i].status = 0; | |
| np->rx_ring[i].control = np->rx_buf_sz << RBSShift; | |
| np->rx_ring[i].next_desc = np->rx_ring_dma + | |
| (i + 1)*sizeof(struct fealnx_desc); | |
| np->rx_ring[i].next_desc_logical = &np->rx_ring[i + 1]; | |
| np->rx_ring[i].skbuff = NULL; | |
| } | |
| /* for the last rx descriptor */ | |
| np->rx_ring[i - 1].next_desc = np->rx_ring_dma; | |
| np->rx_ring[i - 1].next_desc_logical = np->rx_ring; | |
| /* allocate skb for rx buffers */ | |
| for (i = 0; i < RX_RING_SIZE; i++) { | |
| struct sk_buff *skb = dev_alloc_skb(np->rx_buf_sz); | |
| if (skb == NULL) { | |
| np->lack_rxbuf = &np->rx_ring[i]; | |
| break; | |
| } | |
| ++np->really_rx_count; | |
| np->rx_ring[i].skbuff = skb; | |
| skb->dev = dev; /* Mark as being used by this device. */ | |
| np->rx_ring[i].buffer = pci_map_single(np->pci_dev, skb->data, | |
| np->rx_buf_sz, PCI_DMA_FROMDEVICE); | |
| np->rx_ring[i].status = RXOWN; | |
| np->rx_ring[i].control |= RXIC; | |
| } | |
| /* initialize tx variables */ | |
| np->cur_tx = &np->tx_ring[0]; | |
| np->cur_tx_copy = &np->tx_ring[0]; | |
| np->really_tx_count = 0; | |
| np->free_tx_count = TX_RING_SIZE; | |
| for (i = 0; i < TX_RING_SIZE; i++) { | |
| np->tx_ring[i].status = 0; | |
| /* do we need np->tx_ring[i].control = XXX; ?? */ | |
| np->tx_ring[i].next_desc = np->tx_ring_dma + | |
| (i + 1)*sizeof(struct fealnx_desc); | |
| np->tx_ring[i].next_desc_logical = &np->tx_ring[i + 1]; | |
| np->tx_ring[i].skbuff = NULL; | |
| } | |
| /* for the last tx descriptor */ | |
| np->tx_ring[i - 1].next_desc = np->tx_ring_dma; | |
| np->tx_ring[i - 1].next_desc_logical = &np->tx_ring[0]; | |
| } | |
| static int start_tx(struct sk_buff *skb, struct net_device *dev) | |
| { | |
| struct netdev_private *np = netdev_priv(dev); | |
| unsigned long flags; | |
| spin_lock_irqsave(&np->lock, flags); | |
| np->cur_tx_copy->skbuff = skb; | |
| #define one_buffer | |
| #define BPT 1022 | |
| #if defined(one_buffer) | |
| np->cur_tx_copy->buffer = pci_map_single(np->pci_dev, skb->data, | |
| skb->len, PCI_DMA_TODEVICE); | |
| np->cur_tx_copy->control = TXIC | TXLD | TXFD | CRCEnable | PADEnable; | |
| np->cur_tx_copy->control |= (skb->len << PKTSShift); /* pkt size */ | |
| np->cur_tx_copy->control |= (skb->len << TBSShift); /* buffer size */ | |
| // 89/12/29 add, | |
| if (np->pci_dev->device == 0x891) | |
| np->cur_tx_copy->control |= ETIControl | RetryTxLC; | |
| np->cur_tx_copy->status = TXOWN; | |
| np->cur_tx_copy = np->cur_tx_copy->next_desc_logical; | |
| --np->free_tx_count; | |
| #elif defined(two_buffer) | |
| if (skb->len > BPT) { | |
| struct fealnx_desc *next; | |
| /* for the first descriptor */ | |
| np->cur_tx_copy->buffer = pci_map_single(np->pci_dev, skb->data, | |
| BPT, PCI_DMA_TODEVICE); | |
| np->cur_tx_copy->control = TXIC | TXFD | CRCEnable | PADEnable; | |
| np->cur_tx_copy->control |= (skb->len << PKTSShift); /* pkt size */ | |
| np->cur_tx_copy->control |= (BPT << TBSShift); /* buffer size */ | |
| /* for the last descriptor */ | |
| next = np->cur_tx_copy->next_desc_logical; | |
| next->skbuff = skb; | |
| next->control = TXIC | TXLD | CRCEnable | PADEnable; | |
| next->control |= (skb->len << PKTSShift); /* pkt size */ | |
| next->control |= ((skb->len - BPT) << TBSShift); /* buf size */ | |
| // 89/12/29 add, | |
| if (np->pci_dev->device == 0x891) | |
| np->cur_tx_copy->control |= ETIControl | RetryTxLC; | |
| next->buffer = pci_map_single(ep->pci_dev, skb->data + BPT, | |
| skb->len - BPT, PCI_DMA_TODEVICE); | |
| next->status = TXOWN; | |
| np->cur_tx_copy->status = TXOWN; | |
| np->cur_tx_copy = next->next_desc_logical; | |
| np->free_tx_count -= 2; | |
| } else { | |
| np->cur_tx_copy->buffer = pci_map_single(np->pci_dev, skb->data, | |
| skb->len, PCI_DMA_TODEVICE); | |
| np->cur_tx_copy->control = TXIC | TXLD | TXFD | CRCEnable | PADEnable; | |
| np->cur_tx_copy->control |= (skb->len << PKTSShift); /* pkt size */ | |
| np->cur_tx_copy->control |= (skb->len << TBSShift); /* buffer size */ | |
| // 89/12/29 add, | |
| if (np->pci_dev->device == 0x891) | |
| np->cur_tx_copy->control |= ETIControl | RetryTxLC; | |
| np->cur_tx_copy->status = TXOWN; | |
| np->cur_tx_copy = np->cur_tx_copy->next_desc_logical; | |
| --np->free_tx_count; | |
| } | |
| #endif | |
| if (np->free_tx_count < 2) | |
| netif_stop_queue(dev); | |
| ++np->really_tx_count; | |
| iowrite32(0, np->mem + TXPDR); | |
| dev->trans_start = jiffies; | |
| spin_unlock_irqrestore(&np->lock, flags); | |
| return 0; | |
| } | |
| /* Take lock before calling */ | |
| /* Chip probably hosed tx ring. Clean up. */ | |
| static void reset_tx_descriptors(struct net_device *dev) | |
| { | |
| struct netdev_private *np = netdev_priv(dev); | |
| struct fealnx_desc *cur; | |
| int i; | |
| /* initialize tx variables */ | |
| np->cur_tx = &np->tx_ring[0]; | |
| np->cur_tx_copy = &np->tx_ring[0]; | |
| np->really_tx_count = 0; | |
| np->free_tx_count = TX_RING_SIZE; | |
| for (i = 0; i < TX_RING_SIZE; i++) { | |
| cur = &np->tx_ring[i]; | |
| if (cur->skbuff) { | |
| pci_unmap_single(np->pci_dev, cur->buffer, | |
| cur->skbuff->len, PCI_DMA_TODEVICE); | |
| dev_kfree_skb_any(cur->skbuff); | |
| cur->skbuff = NULL; | |
| } | |
| cur->status = 0; | |
| cur->control = 0; /* needed? */ | |
| /* probably not needed. We do it for purely paranoid reasons */ | |
| cur->next_desc = np->tx_ring_dma + | |
| (i + 1)*sizeof(struct fealnx_desc); | |
| cur->next_desc_logical = &np->tx_ring[i + 1]; | |
| } | |
| /* for the last tx descriptor */ | |
| np->tx_ring[TX_RING_SIZE - 1].next_desc = np->tx_ring_dma; | |
| np->tx_ring[TX_RING_SIZE - 1].next_desc_logical = &np->tx_ring[0]; | |
| } | |
| /* Take lock and stop rx before calling this */ | |
| static void reset_rx_descriptors(struct net_device *dev) | |
| { | |
| struct netdev_private *np = netdev_priv(dev); | |
| struct fealnx_desc *cur = np->cur_rx; | |
| int i; | |
| allocate_rx_buffers(dev); | |
| for (i = 0; i < RX_RING_SIZE; i++) { | |
| if (cur->skbuff) | |
| cur->status = RXOWN; | |
| cur = cur->next_desc_logical; | |
| } | |
| iowrite32(np->rx_ring_dma + ((char*)np->cur_rx - (char*)np->rx_ring), | |
| np->mem + RXLBA); | |
| } | |
| /* The interrupt handler does all of the Rx thread work and cleans up | |
| after the Tx thread. */ | |
| static irqreturn_t intr_handler(int irq, void *dev_instance) | |
| { | |
| struct net_device *dev = (struct net_device *) dev_instance; | |
| struct netdev_private *np = netdev_priv(dev); | |
| void __iomem *ioaddr = np->mem; | |
| long boguscnt = max_interrupt_work; | |
| unsigned int num_tx = 0; | |
| int handled = 0; | |
| spin_lock(&np->lock); | |
| iowrite32(0, ioaddr + IMR); | |
| do { | |
| u32 intr_status = ioread32(ioaddr + ISR); | |
| /* Acknowledge all of the current interrupt sources ASAP. */ | |
| iowrite32(intr_status, ioaddr + ISR); | |
| if (debug) | |
| printk(KERN_DEBUG "%s: Interrupt, status %4.4x.\n", dev->name, | |
| intr_status); | |
| if (!(intr_status & np->imrvalue)) | |
| break; | |
| handled = 1; | |
| // 90/1/16 delete, | |
| // | |
| // if (intr_status & FBE) | |
| // { /* fatal error */ | |
| // stop_nic_tx(ioaddr, 0); | |
| // stop_nic_rx(ioaddr, 0); | |
| // break; | |
| // }; | |
| if (intr_status & TUNF) | |
| iowrite32(0, ioaddr + TXPDR); | |
| if (intr_status & CNTOVF) { | |
| /* missed pkts */ | |
| np->stats.rx_missed_errors += ioread32(ioaddr + TALLY) & 0x7fff; | |
| /* crc error */ | |
| np->stats.rx_crc_errors += | |
| (ioread32(ioaddr + TALLY) & 0x7fff0000) >> 16; | |
| } | |
| if (intr_status & (RI | RBU)) { | |
| if (intr_status & RI) | |
| netdev_rx(dev); | |
| else { | |
| stop_nic_rx(ioaddr, np->crvalue); | |
| reset_rx_descriptors(dev); | |
| iowrite32(np->crvalue, ioaddr + TCRRCR); | |
| } | |
| } | |
| while (np->really_tx_count) { | |
| long tx_status = np->cur_tx->status; | |
| long tx_control = np->cur_tx->control; | |
| if (!(tx_control & TXLD)) { /* this pkt is combined by two tx descriptors */ | |
| struct fealnx_desc *next; | |
| next = np->cur_tx->next_desc_logical; | |
| tx_status = next->status; | |
| tx_control = next->control; | |
| } | |
| if (tx_status & TXOWN) | |
| break; | |
| if (!(np->crvalue & CR_W_ENH)) { | |
| if (tx_status & (CSL | LC | EC | UDF | HF)) { | |
| np->stats.tx_errors++; | |
| if (tx_status & EC) | |
| np->stats.tx_aborted_errors++; | |
| if (tx_status & CSL) | |
| np->stats.tx_carrier_errors++; | |
| if (tx_status & LC) | |
| np->stats.tx_window_errors++; | |
| if (tx_status & UDF) | |
| np->stats.tx_fifo_errors++; | |
| if ((tx_status & HF) && np->mii.full_duplex == 0) | |
| np->stats.tx_heartbeat_errors++; | |
| } else { | |
| np->stats.tx_bytes += | |
| ((tx_control & PKTSMask) >> PKTSShift); | |
| np->stats.collisions += | |
| ((tx_status & NCRMask) >> NCRShift); | |
| np->stats.tx_packets++; | |
| } | |
| } else { | |
| np->stats.tx_bytes += | |
| ((tx_control & PKTSMask) >> PKTSShift); | |
| np->stats.tx_packets++; | |
| } | |
| /* Free the original skb. */ | |
| pci_unmap_single(np->pci_dev, np->cur_tx->buffer, | |
| np->cur_tx->skbuff->len, PCI_DMA_TODEVICE); | |
| dev_kfree_skb_irq(np->cur_tx->skbuff); | |
| np->cur_tx->skbuff = NULL; | |
| --np->really_tx_count; | |
| if (np->cur_tx->control & TXLD) { | |
| np->cur_tx = np->cur_tx->next_desc_logical; | |
| ++np->free_tx_count; | |
| } else { | |
| np->cur_tx = np->cur_tx->next_desc_logical; | |
| np->cur_tx = np->cur_tx->next_desc_logical; | |
| np->free_tx_count += 2; | |
| } | |
| num_tx++; | |
| } /* end of for loop */ | |
| if (num_tx && np->free_tx_count >= 2) | |
| netif_wake_queue(dev); | |
| /* read transmit status for enhanced mode only */ | |
| if (np->crvalue & CR_W_ENH) { | |
| long data; | |
| data = ioread32(ioaddr + TSR); | |
| np->stats.tx_errors += (data & 0xff000000) >> 24; | |
| np->stats.tx_aborted_errors += (data & 0xff000000) >> 24; | |
| np->stats.tx_window_errors += (data & 0x00ff0000) >> 16; | |
| np->stats.collisions += (data & 0x0000ffff); | |
| } | |
| if (--boguscnt < 0) { | |
| printk(KERN_WARNING "%s: Too much work at interrupt, " | |
| "status=0x%4.4x.\n", dev->name, intr_status); | |
| if (!np->reset_timer_armed) { | |
| np->reset_timer_armed = 1; | |
| np->reset_timer.expires = RUN_AT(HZ/2); | |
| add_timer(&np->reset_timer); | |
| stop_nic_rxtx(ioaddr, 0); | |
| netif_stop_queue(dev); | |
| /* or netif_tx_disable(dev); ?? */ | |
| /* Prevent other paths from enabling tx,rx,intrs */ | |
| np->crvalue_sv = np->crvalue; | |
| np->imrvalue_sv = np->imrvalue; | |
| np->crvalue &= ~(CR_W_TXEN | CR_W_RXEN); /* or simply = 0? */ | |
| np->imrvalue = 0; | |
| } | |
| break; | |
| } | |
| } while (1); | |
| /* read the tally counters */ | |
| /* missed pkts */ | |
| np->stats.rx_missed_errors += ioread32(ioaddr + TALLY) & 0x7fff; | |
| /* crc error */ | |
| np->stats.rx_crc_errors += (ioread32(ioaddr + TALLY) & 0x7fff0000) >> 16; | |
| if (debug) | |
| printk(KERN_DEBUG "%s: exiting interrupt, status=%#4.4x.\n", | |
| dev->name, ioread32(ioaddr + ISR)); | |
| iowrite32(np->imrvalue, ioaddr + IMR); | |
| spin_unlock(&np->lock); | |
| return IRQ_RETVAL(handled); | |
| } | |
| /* This routine is logically part of the interrupt handler, but separated | |
| for clarity and better register allocation. */ | |
| static int netdev_rx(struct net_device *dev) | |
| { | |
| struct netdev_private *np = netdev_priv(dev); | |
| void __iomem *ioaddr = np->mem; | |
| /* If EOP is set on the next entry, it's a new packet. Send it up. */ | |
| while (!(np->cur_rx->status & RXOWN) && np->cur_rx->skbuff) { | |
| s32 rx_status = np->cur_rx->status; | |
| if (np->really_rx_count == 0) | |
| break; | |
| if (debug) | |
| printk(KERN_DEBUG " netdev_rx() status was %8.8x.\n", rx_status); | |
| if ((!((rx_status & RXFSD) && (rx_status & RXLSD))) | |
| || (rx_status & ErrorSummary)) { | |
| if (rx_status & ErrorSummary) { /* there was a fatal error */ | |
| if (debug) | |
| printk(KERN_DEBUG | |
| "%s: Receive error, Rx status %8.8x.\n", | |
| dev->name, rx_status); | |
| np->stats.rx_errors++; /* end of a packet. */ | |
| if (rx_status & (LONG | RUNT)) | |
| np->stats.rx_length_errors++; | |
| if (rx_status & RXER) | |
| np->stats.rx_frame_errors++; | |
| if (rx_status & CRC) | |
| np->stats.rx_crc_errors++; | |
| } else { | |
| int need_to_reset = 0; | |
| int desno = 0; | |
| if (rx_status & RXFSD) { /* this pkt is too long, over one rx buffer */ | |
| struct fealnx_desc *cur; | |
| /* check this packet is received completely? */ | |
| cur = np->cur_rx; | |
| while (desno <= np->really_rx_count) { | |
| ++desno; | |
| if ((!(cur->status & RXOWN)) | |
| && (cur->status & RXLSD)) | |
| break; | |
| /* goto next rx descriptor */ | |
| cur = cur->next_desc_logical; | |
| } | |
| if (desno > np->really_rx_count) | |
| need_to_reset = 1; | |
| } else /* RXLSD did not find, something error */ | |
| need_to_reset = 1; | |
| if (need_to_reset == 0) { | |
| int i; | |
| np->stats.rx_length_errors++; | |
| /* free all rx descriptors related this long pkt */ | |
| for (i = 0; i < desno; ++i) { | |
| if (!np->cur_rx->skbuff) { | |
| printk(KERN_DEBUG | |
| "%s: I'm scared\n", dev->name); | |
| break; | |
| } | |
| np->cur_rx->status = RXOWN; | |
| np->cur_rx = np->cur_rx->next_desc_logical; | |
| } | |
| continue; | |
| } else { /* rx error, need to reset this chip */ | |
| stop_nic_rx(ioaddr, np->crvalue); | |
| reset_rx_descriptors(dev); | |
| iowrite32(np->crvalue, ioaddr + TCRRCR); | |
| } | |
| break; /* exit the while loop */ | |
| } | |
| } else { /* this received pkt is ok */ | |
| struct sk_buff *skb; | |
| /* Omit the four octet CRC from the length. */ | |
| short pkt_len = ((rx_status & FLNGMASK) >> FLNGShift) - 4; | |
| #ifndef final_version | |
| if (debug) | |
| printk(KERN_DEBUG " netdev_rx() normal Rx pkt length %d" | |
| " status %x.\n", pkt_len, rx_status); | |
| #endif | |
| /* Check if the packet is long enough to accept without copying | |
| to a minimally-sized skbuff. */ | |
| if (pkt_len < rx_copybreak && | |
| (skb = dev_alloc_skb(pkt_len + 2)) != NULL) { | |
| skb_reserve(skb, 2); /* 16 byte align the IP header */ | |
| pci_dma_sync_single_for_cpu(np->pci_dev, | |
| np->cur_rx->buffer, | |
| np->rx_buf_sz, | |
| PCI_DMA_FROMDEVICE); | |
| /* Call copy + cksum if available. */ | |
| #if ! defined(__alpha__) | |
| skb_copy_to_linear_data(skb, | |
| np->cur_rx->skbuff->data, pkt_len); | |
| skb_put(skb, pkt_len); | |
| #else | |
| memcpy(skb_put(skb, pkt_len), | |
| np->cur_rx->skbuff->data, pkt_len); | |
| #endif | |
| pci_dma_sync_single_for_device(np->pci_dev, | |
| np->cur_rx->buffer, | |
| np->rx_buf_sz, | |
| PCI_DMA_FROMDEVICE); | |
| } else { | |
| pci_unmap_single(np->pci_dev, | |
| np->cur_rx->buffer, | |
| np->rx_buf_sz, | |
| PCI_DMA_FROMDEVICE); | |
| skb_put(skb = np->cur_rx->skbuff, pkt_len); | |
| np->cur_rx->skbuff = NULL; | |
| --np->really_rx_count; | |
| } | |
| skb->protocol = eth_type_trans(skb, dev); | |
| netif_rx(skb); | |
| dev->last_rx = jiffies; | |
| np->stats.rx_packets++; | |
| np->stats.rx_bytes += pkt_len; | |
| } | |
| np->cur_rx = np->cur_rx->next_desc_logical; | |
| } /* end of while loop */ | |
| /* allocate skb for rx buffers */ | |
| allocate_rx_buffers(dev); | |
| return 0; | |
| } | |
| static struct net_device_stats *get_stats(struct net_device *dev) | |
| { | |
| struct netdev_private *np = netdev_priv(dev); | |
| void __iomem *ioaddr = np->mem; | |
| /* The chip only need report frame silently dropped. */ | |
| if (netif_running(dev)) { | |
| np->stats.rx_missed_errors += ioread32(ioaddr + TALLY) & 0x7fff; | |
| np->stats.rx_crc_errors += (ioread32(ioaddr + TALLY) & 0x7fff0000) >> 16; | |
| } | |
| return &np->stats; | |
| } | |
| /* for dev->set_multicast_list */ | |
| static void set_rx_mode(struct net_device *dev) | |
| { | |
| spinlock_t *lp = &((struct netdev_private *)netdev_priv(dev))->lock; | |
| unsigned long flags; | |
| spin_lock_irqsave(lp, flags); | |
| __set_rx_mode(dev); | |
| spin_unlock_irqrestore(lp, flags); | |
| } | |
| /* Take lock before calling */ | |
| static void __set_rx_mode(struct net_device *dev) | |
| { | |
| struct netdev_private *np = netdev_priv(dev); | |
| void __iomem *ioaddr = np->mem; | |
| u32 mc_filter[2]; /* Multicast hash filter */ | |
| u32 rx_mode; | |
| if (dev->flags & IFF_PROMISC) { /* Set promiscuous. */ | |
| memset(mc_filter, 0xff, sizeof(mc_filter)); | |
| rx_mode = CR_W_PROM | CR_W_AB | CR_W_AM; | |
| } else if ((dev->mc_count > multicast_filter_limit) | |
| || (dev->flags & IFF_ALLMULTI)) { | |
| /* Too many to match, or accept all multicasts. */ | |
| memset(mc_filter, 0xff, sizeof(mc_filter)); | |
| rx_mode = CR_W_AB | CR_W_AM; | |
| } else { | |
| struct dev_mc_list *mclist; | |
| int i; | |
| memset(mc_filter, 0, sizeof(mc_filter)); | |
| for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count; | |
| i++, mclist = mclist->next) { | |
| unsigned int bit; | |
| bit = (ether_crc(ETH_ALEN, mclist->dmi_addr) >> 26) ^ 0x3F; | |
| mc_filter[bit >> 5] |= (1 << bit); | |
| } | |
| rx_mode = CR_W_AB | CR_W_AM; | |
| } | |
| stop_nic_rxtx(ioaddr, np->crvalue); | |
| iowrite32(mc_filter[0], ioaddr + MAR0); | |
| iowrite32(mc_filter[1], ioaddr + MAR1); | |
| np->crvalue &= ~CR_W_RXMODEMASK; | |
| np->crvalue |= rx_mode; | |
| iowrite32(np->crvalue, ioaddr + TCRRCR); | |
| } | |
| static void netdev_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) | |
| { | |
| struct netdev_private *np = netdev_priv(dev); | |
| strcpy(info->driver, DRV_NAME); | |
| strcpy(info->version, DRV_VERSION); | |
| strcpy(info->bus_info, pci_name(np->pci_dev)); | |
| } | |
| static int netdev_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) | |
| { | |
| struct netdev_private *np = netdev_priv(dev); | |
| int rc; | |
| spin_lock_irq(&np->lock); | |
| rc = mii_ethtool_gset(&np->mii, cmd); | |
| spin_unlock_irq(&np->lock); | |
| return rc; | |
| } | |
| static int netdev_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) | |
| { | |
| struct netdev_private *np = netdev_priv(dev); | |
| int rc; | |
| spin_lock_irq(&np->lock); | |
| rc = mii_ethtool_sset(&np->mii, cmd); | |
| spin_unlock_irq(&np->lock); | |
| return rc; | |
| } | |
| static int netdev_nway_reset(struct net_device *dev) | |
| { | |
| struct netdev_private *np = netdev_priv(dev); | |
| return mii_nway_restart(&np->mii); | |
| } | |
| static u32 netdev_get_link(struct net_device *dev) | |
| { | |
| struct netdev_private *np = netdev_priv(dev); | |
| return mii_link_ok(&np->mii); | |
| } | |
| static u32 netdev_get_msglevel(struct net_device *dev) | |
| { | |
| return debug; | |
| } | |
| static void netdev_set_msglevel(struct net_device *dev, u32 value) | |
| { | |
| debug = value; | |
| } | |
| static const struct ethtool_ops netdev_ethtool_ops = { | |
| .get_drvinfo = netdev_get_drvinfo, | |
| .get_settings = netdev_get_settings, | |
| .set_settings = netdev_set_settings, | |
| .nway_reset = netdev_nway_reset, | |
| .get_link = netdev_get_link, | |
| .get_msglevel = netdev_get_msglevel, | |
| .set_msglevel = netdev_set_msglevel, | |
| }; | |
| static int mii_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) | |
| { | |
| struct netdev_private *np = netdev_priv(dev); | |
| int rc; | |
| if (!netif_running(dev)) | |
| return -EINVAL; | |
| spin_lock_irq(&np->lock); | |
| rc = generic_mii_ioctl(&np->mii, if_mii(rq), cmd, NULL); | |
| spin_unlock_irq(&np->lock); | |
| return rc; | |
| } | |
| static int netdev_close(struct net_device *dev) | |
| { | |
| struct netdev_private *np = netdev_priv(dev); | |
| void __iomem *ioaddr = np->mem; | |
| int i; | |
| netif_stop_queue(dev); | |
| /* Disable interrupts by clearing the interrupt mask. */ | |
| iowrite32(0x0000, ioaddr + IMR); | |
| /* Stop the chip's Tx and Rx processes. */ | |
| stop_nic_rxtx(ioaddr, 0); | |
| del_timer_sync(&np->timer); | |
| del_timer_sync(&np->reset_timer); | |
| free_irq(dev->irq, dev); | |
| /* Free all the skbuffs in the Rx queue. */ | |
| for (i = 0; i < RX_RING_SIZE; i++) { | |
| struct sk_buff *skb = np->rx_ring[i].skbuff; | |
| np->rx_ring[i].status = 0; | |
| if (skb) { | |
| pci_unmap_single(np->pci_dev, np->rx_ring[i].buffer, | |
| np->rx_buf_sz, PCI_DMA_FROMDEVICE); | |
| dev_kfree_skb(skb); | |
| np->rx_ring[i].skbuff = NULL; | |
| } | |
| } | |
| for (i = 0; i < TX_RING_SIZE; i++) { | |
| struct sk_buff *skb = np->tx_ring[i].skbuff; | |
| if (skb) { | |
| pci_unmap_single(np->pci_dev, np->tx_ring[i].buffer, | |
| skb->len, PCI_DMA_TODEVICE); | |
| dev_kfree_skb(skb); | |
| np->tx_ring[i].skbuff = NULL; | |
| } | |
| } | |
| return 0; | |
| } | |
| static struct pci_device_id fealnx_pci_tbl[] = { | |
| {0x1516, 0x0800, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, | |
| {0x1516, 0x0803, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1}, | |
| {0x1516, 0x0891, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2}, | |
| {} /* terminate list */ | |
| }; | |
| MODULE_DEVICE_TABLE(pci, fealnx_pci_tbl); | |
| static struct pci_driver fealnx_driver = { | |
| .name = "fealnx", | |
| .id_table = fealnx_pci_tbl, | |
| .probe = fealnx_init_one, | |
| .remove = __devexit_p(fealnx_remove_one), | |
| }; | |
| static int __init fealnx_init(void) | |
| { | |
| /* when a module, this is printed whether or not devices are found in probe */ | |
| #ifdef MODULE | |
| printk(version); | |
| #endif | |
| return pci_register_driver(&fealnx_driver); | |
| } | |
| static void __exit fealnx_exit(void) | |
| { | |
| pci_unregister_driver(&fealnx_driver); | |
| } | |
| module_init(fealnx_init); | |
| module_exit(fealnx_exit); |