| /* | |
| * This file is subject to the terms and conditions of the GNU General Public | |
| * License. See the file "COPYING" in the main directory of this archive | |
| * for more details. | |
| * | |
| * Copyright (C) 1999-2008 Silicon Graphics, Inc. All rights reserved. | |
| */ | |
| /* | |
| * Cross Partition Network Interface (XPNET) support | |
| * | |
| * XPNET provides a virtual network layered on top of the Cross | |
| * Partition communication layer. | |
| * | |
| * XPNET provides direct point-to-point and broadcast-like support | |
| * for an ethernet-like device. The ethernet broadcast medium is | |
| * replaced with a point-to-point message structure which passes | |
| * pointers to a DMA-capable block that a remote partition should | |
| * retrieve and pass to the upper level networking layer. | |
| * | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/types.h> | |
| #include <linux/kernel.h> | |
| #include <linux/init.h> | |
| #include <linux/ioport.h> | |
| #include <linux/netdevice.h> | |
| #include <linux/etherdevice.h> | |
| #include <linux/delay.h> | |
| #include <linux/ethtool.h> | |
| #include <linux/mii.h> | |
| #include <linux/smp.h> | |
| #include <linux/string.h> | |
| #include <asm/sn/bte.h> | |
| #include <asm/sn/io.h> | |
| #include <asm/sn/sn_sal.h> | |
| #include <asm/atomic.h> | |
| #include "xp.h" | |
| /* | |
| * The message payload transferred by XPC. | |
| * | |
| * buf_pa is the physical address where the DMA should pull from. | |
| * | |
| * NOTE: for performance reasons, buf_pa should _ALWAYS_ begin on a | |
| * cacheline boundary. To accomplish this, we record the number of | |
| * bytes from the beginning of the first cacheline to the first useful | |
| * byte of the skb (leadin_ignore) and the number of bytes from the | |
| * last useful byte of the skb to the end of the last cacheline | |
| * (tailout_ignore). | |
| * | |
| * size is the number of bytes to transfer which includes the skb->len | |
| * (useful bytes of the senders skb) plus the leadin and tailout | |
| */ | |
| struct xpnet_message { | |
| u16 version; /* Version for this message */ | |
| u16 embedded_bytes; /* #of bytes embedded in XPC message */ | |
| u32 magic; /* Special number indicating this is xpnet */ | |
| u64 buf_pa; /* phys address of buffer to retrieve */ | |
| u32 size; /* #of bytes in buffer */ | |
| u8 leadin_ignore; /* #of bytes to ignore at the beginning */ | |
| u8 tailout_ignore; /* #of bytes to ignore at the end */ | |
| unsigned char data; /* body of small packets */ | |
| }; | |
| /* | |
| * Determine the size of our message, the cacheline aligned size, | |
| * and then the number of message will request from XPC. | |
| * | |
| * XPC expects each message to exist in an individual cacheline. | |
| */ | |
| #define XPNET_MSG_SIZE (L1_CACHE_BYTES - XPC_MSG_PAYLOAD_OFFSET) | |
| #define XPNET_MSG_DATA_MAX \ | |
| (XPNET_MSG_SIZE - (u64)(&((struct xpnet_message *)0)->data)) | |
| #define XPNET_MSG_ALIGNED_SIZE (L1_CACHE_ALIGN(XPNET_MSG_SIZE)) | |
| #define XPNET_MSG_NENTRIES (PAGE_SIZE / XPNET_MSG_ALIGNED_SIZE) | |
| #define XPNET_MAX_KTHREADS (XPNET_MSG_NENTRIES + 1) | |
| #define XPNET_MAX_IDLE_KTHREADS (XPNET_MSG_NENTRIES + 1) | |
| /* | |
| * Version number of XPNET implementation. XPNET can always talk to versions | |
| * with same major #, and never talk to versions with a different version. | |
| */ | |
| #define _XPNET_VERSION(_major, _minor) (((_major) << 4) | (_minor)) | |
| #define XPNET_VERSION_MAJOR(_v) ((_v) >> 4) | |
| #define XPNET_VERSION_MINOR(_v) ((_v) & 0xf) | |
| #define XPNET_VERSION _XPNET_VERSION(1, 0) /* version 1.0 */ | |
| #define XPNET_VERSION_EMBED _XPNET_VERSION(1, 1) /* version 1.1 */ | |
| #define XPNET_MAGIC 0x88786984 /* "XNET" */ | |
| #define XPNET_VALID_MSG(_m) \ | |
| ((XPNET_VERSION_MAJOR(_m->version) == XPNET_VERSION_MAJOR(XPNET_VERSION)) \ | |
| && (msg->magic == XPNET_MAGIC)) | |
| #define XPNET_DEVICE_NAME "xp0" | |
| /* | |
| * When messages are queued with xpc_send_notify, a kmalloc'd buffer | |
| * of the following type is passed as a notification cookie. When the | |
| * notification function is called, we use the cookie to decide | |
| * whether all outstanding message sends have completed. The skb can | |
| * then be released. | |
| */ | |
| struct xpnet_pending_msg { | |
| struct list_head free_list; | |
| struct sk_buff *skb; | |
| atomic_t use_count; | |
| }; | |
| /* driver specific structure pointed to by the device structure */ | |
| struct xpnet_dev_private { | |
| struct net_device_stats stats; | |
| }; | |
| struct net_device *xpnet_device; | |
| /* | |
| * When we are notified of other partitions activating, we add them to | |
| * our bitmask of partitions to which we broadcast. | |
| */ | |
| static u64 xpnet_broadcast_partitions; | |
| /* protect above */ | |
| static DEFINE_SPINLOCK(xpnet_broadcast_lock); | |
| /* | |
| * Since the Block Transfer Engine (BTE) is being used for the transfer | |
| * and it relies upon cache-line size transfers, we need to reserve at | |
| * least one cache-line for head and tail alignment. The BTE is | |
| * limited to 8MB transfers. | |
| * | |
| * Testing has shown that changing MTU to greater than 64KB has no effect | |
| * on TCP as the two sides negotiate a Max Segment Size that is limited | |
| * to 64K. Other protocols May use packets greater than this, but for | |
| * now, the default is 64KB. | |
| */ | |
| #define XPNET_MAX_MTU (0x800000UL - L1_CACHE_BYTES) | |
| /* 32KB has been determined to be the ideal */ | |
| #define XPNET_DEF_MTU (0x8000UL) | |
| /* | |
| * The partition id is encapsulated in the MAC address. The following | |
| * define locates the octet the partid is in. | |
| */ | |
| #define XPNET_PARTID_OCTET 1 | |
| #define XPNET_LICENSE_OCTET 2 | |
| /* | |
| * Define the XPNET debug device structure that is to be used with dev_dbg(), | |
| * dev_err(), dev_warn(), and dev_info(). | |
| */ | |
| struct device_driver xpnet_dbg_name = { | |
| .name = "xpnet" | |
| }; | |
| struct device xpnet_dbg_subname = { | |
| .bus_id = {0}, /* set to "" */ | |
| .driver = &xpnet_dbg_name | |
| }; | |
| struct device *xpnet = &xpnet_dbg_subname; | |
| /* | |
| * Packet was recevied by XPC and forwarded to us. | |
| */ | |
| static void | |
| xpnet_receive(short partid, int channel, struct xpnet_message *msg) | |
| { | |
| struct sk_buff *skb; | |
| bte_result_t bret; | |
| struct xpnet_dev_private *priv = | |
| (struct xpnet_dev_private *)xpnet_device->priv; | |
| if (!XPNET_VALID_MSG(msg)) { | |
| /* | |
| * Packet with a different XPC version. Ignore. | |
| */ | |
| xpc_received(partid, channel, (void *)msg); | |
| priv->stats.rx_errors++; | |
| return; | |
| } | |
| dev_dbg(xpnet, "received 0x%lx, %d, %d, %d\n", msg->buf_pa, msg->size, | |
| msg->leadin_ignore, msg->tailout_ignore); | |
| /* reserve an extra cache line */ | |
| skb = dev_alloc_skb(msg->size + L1_CACHE_BYTES); | |
| if (!skb) { | |
| dev_err(xpnet, "failed on dev_alloc_skb(%d)\n", | |
| msg->size + L1_CACHE_BYTES); | |
| xpc_received(partid, channel, (void *)msg); | |
| priv->stats.rx_errors++; | |
| return; | |
| } | |
| /* | |
| * The allocated skb has some reserved space. | |
| * In order to use bte_copy, we need to get the | |
| * skb->data pointer moved forward. | |
| */ | |
| skb_reserve(skb, (L1_CACHE_BYTES - ((u64)skb->data & | |
| (L1_CACHE_BYTES - 1)) + | |
| msg->leadin_ignore)); | |
| /* | |
| * Update the tail pointer to indicate data actually | |
| * transferred. | |
| */ | |
| skb_put(skb, (msg->size - msg->leadin_ignore - msg->tailout_ignore)); | |
| /* | |
| * Move the data over from the other side. | |
| */ | |
| if ((XPNET_VERSION_MINOR(msg->version) == 1) && | |
| (msg->embedded_bytes != 0)) { | |
| dev_dbg(xpnet, "copying embedded message. memcpy(0x%p, 0x%p, " | |
| "%lu)\n", skb->data, &msg->data, | |
| (size_t)msg->embedded_bytes); | |
| skb_copy_to_linear_data(skb, &msg->data, | |
| (size_t)msg->embedded_bytes); | |
| } else { | |
| dev_dbg(xpnet, "transferring buffer to the skb->data area;\n\t" | |
| "bte_copy(0x%p, 0x%p, %hu)\n", (void *)msg->buf_pa, | |
| (void *)__pa((u64)skb->data & ~(L1_CACHE_BYTES - 1)), | |
| msg->size); | |
| bret = bte_copy(msg->buf_pa, | |
| __pa((u64)skb->data & ~(L1_CACHE_BYTES - 1)), | |
| msg->size, (BTE_NOTIFY | BTE_WACQUIRE), NULL); | |
| if (bret != BTE_SUCCESS) { | |
| /* | |
| * >>> Need better way of cleaning skb. Currently skb | |
| * >>> appears in_use and we can't just call | |
| * >>> dev_kfree_skb. | |
| */ | |
| dev_err(xpnet, "bte_copy(0x%p, 0x%p, 0x%hx) returned " | |
| "error=0x%x\n", (void *)msg->buf_pa, | |
| (void *)__pa((u64)skb->data & | |
| ~(L1_CACHE_BYTES - 1)), | |
| msg->size, bret); | |
| xpc_received(partid, channel, (void *)msg); | |
| priv->stats.rx_errors++; | |
| return; | |
| } | |
| } | |
| dev_dbg(xpnet, "<skb->head=0x%p skb->data=0x%p skb->tail=0x%p " | |
| "skb->end=0x%p skb->len=%d\n", (void *)skb->head, | |
| (void *)skb->data, skb_tail_pointer(skb), skb_end_pointer(skb), | |
| skb->len); | |
| skb->protocol = eth_type_trans(skb, xpnet_device); | |
| skb->ip_summed = CHECKSUM_UNNECESSARY; | |
| dev_dbg(xpnet, "passing skb to network layer\n" | |
| KERN_DEBUG "\tskb->head=0x%p skb->data=0x%p skb->tail=0x%p " | |
| "skb->end=0x%p skb->len=%d\n", | |
| (void *)skb->head, (void *)skb->data, skb_tail_pointer(skb), | |
| skb_end_pointer(skb), skb->len); | |
| xpnet_device->last_rx = jiffies; | |
| priv->stats.rx_packets++; | |
| priv->stats.rx_bytes += skb->len + ETH_HLEN; | |
| netif_rx_ni(skb); | |
| xpc_received(partid, channel, (void *)msg); | |
| } | |
| /* | |
| * This is the handler which XPC calls during any sort of change in | |
| * state or message reception on a connection. | |
| */ | |
| static void | |
| xpnet_connection_activity(enum xp_retval reason, short partid, int channel, | |
| void *data, void *key) | |
| { | |
| long bp; | |
| DBUG_ON(partid <= 0 || partid >= XP_MAX_PARTITIONS); | |
| DBUG_ON(channel != XPC_NET_CHANNEL); | |
| switch (reason) { | |
| case xpMsgReceived: /* message received */ | |
| DBUG_ON(data == NULL); | |
| xpnet_receive(partid, channel, (struct xpnet_message *)data); | |
| break; | |
| case xpConnected: /* connection completed to a partition */ | |
| spin_lock_bh(&xpnet_broadcast_lock); | |
| xpnet_broadcast_partitions |= 1UL << (partid - 1); | |
| bp = xpnet_broadcast_partitions; | |
| spin_unlock_bh(&xpnet_broadcast_lock); | |
| netif_carrier_on(xpnet_device); | |
| dev_dbg(xpnet, "%s connection created to partition %d; " | |
| "xpnet_broadcast_partitions=0x%lx\n", | |
| xpnet_device->name, partid, bp); | |
| break; | |
| default: | |
| spin_lock_bh(&xpnet_broadcast_lock); | |
| xpnet_broadcast_partitions &= ~(1UL << (partid - 1)); | |
| bp = xpnet_broadcast_partitions; | |
| spin_unlock_bh(&xpnet_broadcast_lock); | |
| if (bp == 0) | |
| netif_carrier_off(xpnet_device); | |
| dev_dbg(xpnet, "%s disconnected from partition %d; " | |
| "xpnet_broadcast_partitions=0x%lx\n", | |
| xpnet_device->name, partid, bp); | |
| break; | |
| } | |
| } | |
| static int | |
| xpnet_dev_open(struct net_device *dev) | |
| { | |
| enum xp_retval ret; | |
| dev_dbg(xpnet, "calling xpc_connect(%d, 0x%p, NULL, %ld, %ld, %ld, " | |
| "%ld)\n", XPC_NET_CHANNEL, xpnet_connection_activity, | |
| XPNET_MSG_SIZE, XPNET_MSG_NENTRIES, XPNET_MAX_KTHREADS, | |
| XPNET_MAX_IDLE_KTHREADS); | |
| ret = xpc_connect(XPC_NET_CHANNEL, xpnet_connection_activity, NULL, | |
| XPNET_MSG_SIZE, XPNET_MSG_NENTRIES, | |
| XPNET_MAX_KTHREADS, XPNET_MAX_IDLE_KTHREADS); | |
| if (ret != xpSuccess) { | |
| dev_err(xpnet, "ifconfig up of %s failed on XPC connect, " | |
| "ret=%d\n", dev->name, ret); | |
| return -ENOMEM; | |
| } | |
| dev_dbg(xpnet, "ifconfig up of %s; XPC connected\n", dev->name); | |
| return 0; | |
| } | |
| static int | |
| xpnet_dev_stop(struct net_device *dev) | |
| { | |
| xpc_disconnect(XPC_NET_CHANNEL); | |
| dev_dbg(xpnet, "ifconfig down of %s; XPC disconnected\n", dev->name); | |
| return 0; | |
| } | |
| static int | |
| xpnet_dev_change_mtu(struct net_device *dev, int new_mtu) | |
| { | |
| /* 68 comes from min TCP+IP+MAC header */ | |
| if ((new_mtu < 68) || (new_mtu > XPNET_MAX_MTU)) { | |
| dev_err(xpnet, "ifconfig %s mtu %d failed; value must be " | |
| "between 68 and %ld\n", dev->name, new_mtu, | |
| XPNET_MAX_MTU); | |
| return -EINVAL; | |
| } | |
| dev->mtu = new_mtu; | |
| dev_dbg(xpnet, "ifconfig %s mtu set to %d\n", dev->name, new_mtu); | |
| return 0; | |
| } | |
| /* | |
| * Required for the net_device structure. | |
| */ | |
| static int | |
| xpnet_dev_set_config(struct net_device *dev, struct ifmap *new_map) | |
| { | |
| return 0; | |
| } | |
| /* | |
| * Return statistics to the caller. | |
| */ | |
| static struct net_device_stats * | |
| xpnet_dev_get_stats(struct net_device *dev) | |
| { | |
| struct xpnet_dev_private *priv; | |
| priv = (struct xpnet_dev_private *)dev->priv; | |
| return &priv->stats; | |
| } | |
| /* | |
| * Notification that the other end has received the message and | |
| * DMA'd the skb information. At this point, they are done with | |
| * our side. When all recipients are done processing, we | |
| * release the skb and then release our pending message structure. | |
| */ | |
| static void | |
| xpnet_send_completed(enum xp_retval reason, short partid, int channel, | |
| void *__qm) | |
| { | |
| struct xpnet_pending_msg *queued_msg = (struct xpnet_pending_msg *)__qm; | |
| DBUG_ON(queued_msg == NULL); | |
| dev_dbg(xpnet, "message to %d notified with reason %d\n", | |
| partid, reason); | |
| if (atomic_dec_return(&queued_msg->use_count) == 0) { | |
| dev_dbg(xpnet, "all acks for skb->head=-x%p\n", | |
| (void *)queued_msg->skb->head); | |
| dev_kfree_skb_any(queued_msg->skb); | |
| kfree(queued_msg); | |
| } | |
| } | |
| /* | |
| * Network layer has formatted a packet (skb) and is ready to place it | |
| * "on the wire". Prepare and send an xpnet_message to all partitions | |
| * which have connected with us and are targets of this packet. | |
| * | |
| * MAC-NOTE: For the XPNET driver, the MAC address contains the | |
| * destination partition_id. If the destination partition id word | |
| * is 0xff, this packet is to broadcast to all partitions. | |
| */ | |
| static int | |
| xpnet_dev_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) | |
| { | |
| struct xpnet_pending_msg *queued_msg; | |
| enum xp_retval ret; | |
| struct xpnet_message *msg; | |
| u64 start_addr, end_addr; | |
| long dp; | |
| u8 second_mac_octet; | |
| short dest_partid; | |
| struct xpnet_dev_private *priv; | |
| u16 embedded_bytes; | |
| priv = (struct xpnet_dev_private *)dev->priv; | |
| dev_dbg(xpnet, ">skb->head=0x%p skb->data=0x%p skb->tail=0x%p " | |
| "skb->end=0x%p skb->len=%d\n", (void *)skb->head, | |
| (void *)skb->data, skb_tail_pointer(skb), skb_end_pointer(skb), | |
| skb->len); | |
| /* | |
| * The xpnet_pending_msg tracks how many outstanding | |
| * xpc_send_notifies are relying on this skb. When none | |
| * remain, release the skb. | |
| */ | |
| queued_msg = kmalloc(sizeof(struct xpnet_pending_msg), GFP_ATOMIC); | |
| if (queued_msg == NULL) { | |
| dev_warn(xpnet, "failed to kmalloc %ld bytes; dropping " | |
| "packet\n", sizeof(struct xpnet_pending_msg)); | |
| priv->stats.tx_errors++; | |
| return -ENOMEM; | |
| } | |
| /* get the beginning of the first cacheline and end of last */ | |
| start_addr = ((u64)skb->data & ~(L1_CACHE_BYTES - 1)); | |
| end_addr = L1_CACHE_ALIGN((u64)skb_tail_pointer(skb)); | |
| /* calculate how many bytes to embed in the XPC message */ | |
| embedded_bytes = 0; | |
| if (unlikely(skb->len <= XPNET_MSG_DATA_MAX)) { | |
| /* skb->data does fit so embed */ | |
| embedded_bytes = skb->len; | |
| } | |
| /* | |
| * Since the send occurs asynchronously, we set the count to one | |
| * and begin sending. Any sends that happen to complete before | |
| * we are done sending will not free the skb. We will be left | |
| * with that task during exit. This also handles the case of | |
| * a packet destined for a partition which is no longer up. | |
| */ | |
| atomic_set(&queued_msg->use_count, 1); | |
| queued_msg->skb = skb; | |
| second_mac_octet = skb->data[XPNET_PARTID_OCTET]; | |
| if (second_mac_octet == 0xff) { | |
| /* we are being asked to broadcast to all partitions */ | |
| dp = xpnet_broadcast_partitions; | |
| } else if (second_mac_octet != 0) { | |
| dp = xpnet_broadcast_partitions & | |
| (1UL << (second_mac_octet - 1)); | |
| } else { | |
| /* 0 is an invalid partid. Ignore */ | |
| dp = 0; | |
| } | |
| dev_dbg(xpnet, "destination Partitions mask (dp) = 0x%lx\n", dp); | |
| /* | |
| * If we wanted to allow promiscuous mode to work like an | |
| * unswitched network, this would be a good point to OR in a | |
| * mask of partitions which should be receiving all packets. | |
| */ | |
| /* | |
| * Main send loop. | |
| */ | |
| for (dest_partid = 1; dp && dest_partid < XP_MAX_PARTITIONS; | |
| dest_partid++) { | |
| if (!(dp & (1UL << (dest_partid - 1)))) { | |
| /* not destined for this partition */ | |
| continue; | |
| } | |
| /* remove this partition from the destinations mask */ | |
| dp &= ~(1UL << (dest_partid - 1)); | |
| /* found a partition to send to */ | |
| ret = xpc_allocate(dest_partid, XPC_NET_CHANNEL, | |
| XPC_NOWAIT, (void **)&msg); | |
| if (unlikely(ret != xpSuccess)) | |
| continue; | |
| msg->embedded_bytes = embedded_bytes; | |
| if (unlikely(embedded_bytes != 0)) { | |
| msg->version = XPNET_VERSION_EMBED; | |
| dev_dbg(xpnet, "calling memcpy(0x%p, 0x%p, 0x%lx)\n", | |
| &msg->data, skb->data, (size_t)embedded_bytes); | |
| skb_copy_from_linear_data(skb, &msg->data, | |
| (size_t)embedded_bytes); | |
| } else { | |
| msg->version = XPNET_VERSION; | |
| } | |
| msg->magic = XPNET_MAGIC; | |
| msg->size = end_addr - start_addr; | |
| msg->leadin_ignore = (u64)skb->data - start_addr; | |
| msg->tailout_ignore = end_addr - (u64)skb_tail_pointer(skb); | |
| msg->buf_pa = __pa(start_addr); | |
| dev_dbg(xpnet, "sending XPC message to %d:%d\n" | |
| KERN_DEBUG "msg->buf_pa=0x%lx, msg->size=%u, " | |
| "msg->leadin_ignore=%u, msg->tailout_ignore=%u\n", | |
| dest_partid, XPC_NET_CHANNEL, msg->buf_pa, msg->size, | |
| msg->leadin_ignore, msg->tailout_ignore); | |
| atomic_inc(&queued_msg->use_count); | |
| ret = xpc_send_notify(dest_partid, XPC_NET_CHANNEL, msg, | |
| xpnet_send_completed, queued_msg); | |
| if (unlikely(ret != xpSuccess)) { | |
| atomic_dec(&queued_msg->use_count); | |
| continue; | |
| } | |
| } | |
| if (atomic_dec_return(&queued_msg->use_count) == 0) { | |
| dev_dbg(xpnet, "no partitions to receive packet destined for " | |
| "%d\n", dest_partid); | |
| dev_kfree_skb(skb); | |
| kfree(queued_msg); | |
| } | |
| priv->stats.tx_packets++; | |
| priv->stats.tx_bytes += skb->len; | |
| return 0; | |
| } | |
| /* | |
| * Deal with transmit timeouts coming from the network layer. | |
| */ | |
| static void | |
| xpnet_dev_tx_timeout(struct net_device *dev) | |
| { | |
| struct xpnet_dev_private *priv; | |
| priv = (struct xpnet_dev_private *)dev->priv; | |
| priv->stats.tx_errors++; | |
| return; | |
| } | |
| static int __init | |
| xpnet_init(void) | |
| { | |
| int i; | |
| u32 license_num; | |
| int result = -ENOMEM; | |
| if (!ia64_platform_is("sn2")) | |
| return -ENODEV; | |
| dev_info(xpnet, "registering network device %s\n", XPNET_DEVICE_NAME); | |
| /* | |
| * use ether_setup() to init the majority of our device | |
| * structure and then override the necessary pieces. | |
| */ | |
| xpnet_device = alloc_netdev(sizeof(struct xpnet_dev_private), | |
| XPNET_DEVICE_NAME, ether_setup); | |
| if (xpnet_device == NULL) | |
| return -ENOMEM; | |
| netif_carrier_off(xpnet_device); | |
| xpnet_device->mtu = XPNET_DEF_MTU; | |
| xpnet_device->change_mtu = xpnet_dev_change_mtu; | |
| xpnet_device->open = xpnet_dev_open; | |
| xpnet_device->get_stats = xpnet_dev_get_stats; | |
| xpnet_device->stop = xpnet_dev_stop; | |
| xpnet_device->hard_start_xmit = xpnet_dev_hard_start_xmit; | |
| xpnet_device->tx_timeout = xpnet_dev_tx_timeout; | |
| xpnet_device->set_config = xpnet_dev_set_config; | |
| /* | |
| * Multicast assumes the LSB of the first octet is set for multicast | |
| * MAC addresses. We chose the first octet of the MAC to be unlikely | |
| * to collide with any vendor's officially issued MAC. | |
| */ | |
| xpnet_device->dev_addr[0] = 0xfe; | |
| xpnet_device->dev_addr[XPNET_PARTID_OCTET] = sn_partition_id; | |
| license_num = sn_partition_serial_number_val(); | |
| for (i = 3; i >= 0; i--) { | |
| xpnet_device->dev_addr[XPNET_LICENSE_OCTET + i] = | |
| license_num & 0xff; | |
| license_num = license_num >> 8; | |
| } | |
| /* | |
| * ether_setup() sets this to a multicast device. We are | |
| * really not supporting multicast at this time. | |
| */ | |
| xpnet_device->flags &= ~IFF_MULTICAST; | |
| /* | |
| * No need to checksum as it is a DMA transfer. The BTE will | |
| * report an error if the data is not retrievable and the | |
| * packet will be dropped. | |
| */ | |
| xpnet_device->features = NETIF_F_NO_CSUM; | |
| result = register_netdev(xpnet_device); | |
| if (result != 0) | |
| free_netdev(xpnet_device); | |
| return result; | |
| } | |
| module_init(xpnet_init); | |
| static void __exit | |
| xpnet_exit(void) | |
| { | |
| dev_info(xpnet, "unregistering network device %s\n", | |
| xpnet_device[0].name); | |
| unregister_netdev(xpnet_device); | |
| free_netdev(xpnet_device); | |
| } | |
| module_exit(xpnet_exit); | |
| MODULE_AUTHOR("Silicon Graphics, Inc."); | |
| MODULE_DESCRIPTION("Cross Partition Network adapter (XPNET)"); | |
| MODULE_LICENSE("GPL"); |