| /* | |
| * driver/mfd/asic3.c | |
| * | |
| * Compaq ASIC3 support. | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License version 2 as | |
| * published by the Free Software Foundation. | |
| * | |
| * Copyright 2001 Compaq Computer Corporation. | |
| * Copyright 2004-2005 Phil Blundell | |
| * Copyright 2007 OpenedHand Ltd. | |
| * | |
| * Authors: Phil Blundell <pb@handhelds.org>, | |
| * Samuel Ortiz <sameo@openedhand.com> | |
| * | |
| */ | |
| #include <linux/version.h> | |
| #include <linux/kernel.h> | |
| #include <linux/irq.h> | |
| #include <linux/io.h> | |
| #include <linux/spinlock.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/mfd/asic3.h> | |
| static inline void asic3_write_register(struct asic3 *asic, | |
| unsigned int reg, u32 value) | |
| { | |
| iowrite16(value, asic->mapping + | |
| (reg >> asic->bus_shift)); | |
| } | |
| static inline u32 asic3_read_register(struct asic3 *asic, | |
| unsigned int reg) | |
| { | |
| return ioread16(asic->mapping + | |
| (reg >> asic->bus_shift)); | |
| } | |
| /* IRQs */ | |
| #define MAX_ASIC_ISR_LOOPS 20 | |
| #define ASIC3_GPIO_Base_INCR \ | |
| (ASIC3_GPIO_B_Base - ASIC3_GPIO_A_Base) | |
| static void asic3_irq_flip_edge(struct asic3 *asic, | |
| u32 base, int bit) | |
| { | |
| u16 edge; | |
| unsigned long flags; | |
| spin_lock_irqsave(&asic->lock, flags); | |
| edge = asic3_read_register(asic, | |
| base + ASIC3_GPIO_EdgeTrigger); | |
| edge ^= bit; | |
| asic3_write_register(asic, | |
| base + ASIC3_GPIO_EdgeTrigger, edge); | |
| spin_unlock_irqrestore(&asic->lock, flags); | |
| } | |
| static void asic3_irq_demux(unsigned int irq, struct irq_desc *desc) | |
| { | |
| int iter, i; | |
| unsigned long flags; | |
| struct asic3 *asic; | |
| desc->chip->ack(irq); | |
| asic = desc->handler_data; | |
| for (iter = 0 ; iter < MAX_ASIC_ISR_LOOPS; iter++) { | |
| u32 status; | |
| int bank; | |
| spin_lock_irqsave(&asic->lock, flags); | |
| status = asic3_read_register(asic, | |
| ASIC3_OFFSET(INTR, PIntStat)); | |
| spin_unlock_irqrestore(&asic->lock, flags); | |
| /* Check all ten register bits */ | |
| if ((status & 0x3ff) == 0) | |
| break; | |
| /* Handle GPIO IRQs */ | |
| for (bank = 0; bank < ASIC3_NUM_GPIO_BANKS; bank++) { | |
| if (status & (1 << bank)) { | |
| unsigned long base, istat; | |
| base = ASIC3_GPIO_A_Base | |
| + bank * ASIC3_GPIO_Base_INCR; | |
| spin_lock_irqsave(&asic->lock, flags); | |
| istat = asic3_read_register(asic, | |
| base + | |
| ASIC3_GPIO_IntStatus); | |
| /* Clearing IntStatus */ | |
| asic3_write_register(asic, | |
| base + | |
| ASIC3_GPIO_IntStatus, 0); | |
| spin_unlock_irqrestore(&asic->lock, flags); | |
| for (i = 0; i < ASIC3_GPIOS_PER_BANK; i++) { | |
| int bit = (1 << i); | |
| unsigned int irqnr; | |
| if (!(istat & bit)) | |
| continue; | |
| irqnr = asic->irq_base + | |
| (ASIC3_GPIOS_PER_BANK * bank) | |
| + i; | |
| desc = irq_desc + irqnr; | |
| desc->handle_irq(irqnr, desc); | |
| if (asic->irq_bothedge[bank] & bit) | |
| asic3_irq_flip_edge(asic, base, | |
| bit); | |
| } | |
| } | |
| } | |
| /* Handle remaining IRQs in the status register */ | |
| for (i = ASIC3_NUM_GPIOS; i < ASIC3_NR_IRQS; i++) { | |
| /* They start at bit 4 and go up */ | |
| if (status & (1 << (i - ASIC3_NUM_GPIOS + 4))) { | |
| desc = irq_desc + + i; | |
| desc->handle_irq(asic->irq_base + i, | |
| desc); | |
| } | |
| } | |
| } | |
| if (iter >= MAX_ASIC_ISR_LOOPS) | |
| printk(KERN_ERR "%s: interrupt processing overrun\n", | |
| __func__); | |
| } | |
| static inline int asic3_irq_to_bank(struct asic3 *asic, int irq) | |
| { | |
| int n; | |
| n = (irq - asic->irq_base) >> 4; | |
| return (n * (ASIC3_GPIO_B_Base - ASIC3_GPIO_A_Base)); | |
| } | |
| static inline int asic3_irq_to_index(struct asic3 *asic, int irq) | |
| { | |
| return (irq - asic->irq_base) & 0xf; | |
| } | |
| static void asic3_mask_gpio_irq(unsigned int irq) | |
| { | |
| struct asic3 *asic = get_irq_chip_data(irq); | |
| u32 val, bank, index; | |
| unsigned long flags; | |
| bank = asic3_irq_to_bank(asic, irq); | |
| index = asic3_irq_to_index(asic, irq); | |
| spin_lock_irqsave(&asic->lock, flags); | |
| val = asic3_read_register(asic, bank + ASIC3_GPIO_Mask); | |
| val |= 1 << index; | |
| asic3_write_register(asic, bank + ASIC3_GPIO_Mask, val); | |
| spin_unlock_irqrestore(&asic->lock, flags); | |
| } | |
| static void asic3_mask_irq(unsigned int irq) | |
| { | |
| struct asic3 *asic = get_irq_chip_data(irq); | |
| int regval; | |
| unsigned long flags; | |
| spin_lock_irqsave(&asic->lock, flags); | |
| regval = asic3_read_register(asic, | |
| ASIC3_INTR_Base + | |
| ASIC3_INTR_IntMask); | |
| regval &= ~(ASIC3_INTMASK_MASK0 << | |
| (irq - (asic->irq_base + ASIC3_NUM_GPIOS))); | |
| asic3_write_register(asic, | |
| ASIC3_INTR_Base + | |
| ASIC3_INTR_IntMask, | |
| regval); | |
| spin_unlock_irqrestore(&asic->lock, flags); | |
| } | |
| static void asic3_unmask_gpio_irq(unsigned int irq) | |
| { | |
| struct asic3 *asic = get_irq_chip_data(irq); | |
| u32 val, bank, index; | |
| unsigned long flags; | |
| bank = asic3_irq_to_bank(asic, irq); | |
| index = asic3_irq_to_index(asic, irq); | |
| spin_lock_irqsave(&asic->lock, flags); | |
| val = asic3_read_register(asic, bank + ASIC3_GPIO_Mask); | |
| val &= ~(1 << index); | |
| asic3_write_register(asic, bank + ASIC3_GPIO_Mask, val); | |
| spin_unlock_irqrestore(&asic->lock, flags); | |
| } | |
| static void asic3_unmask_irq(unsigned int irq) | |
| { | |
| struct asic3 *asic = get_irq_chip_data(irq); | |
| int regval; | |
| unsigned long flags; | |
| spin_lock_irqsave(&asic->lock, flags); | |
| regval = asic3_read_register(asic, | |
| ASIC3_INTR_Base + | |
| ASIC3_INTR_IntMask); | |
| regval |= (ASIC3_INTMASK_MASK0 << | |
| (irq - (asic->irq_base + ASIC3_NUM_GPIOS))); | |
| asic3_write_register(asic, | |
| ASIC3_INTR_Base + | |
| ASIC3_INTR_IntMask, | |
| regval); | |
| spin_unlock_irqrestore(&asic->lock, flags); | |
| } | |
| static int asic3_gpio_irq_type(unsigned int irq, unsigned int type) | |
| { | |
| struct asic3 *asic = get_irq_chip_data(irq); | |
| u32 bank, index; | |
| u16 trigger, level, edge, bit; | |
| unsigned long flags; | |
| bank = asic3_irq_to_bank(asic, irq); | |
| index = asic3_irq_to_index(asic, irq); | |
| bit = 1<<index; | |
| spin_lock_irqsave(&asic->lock, flags); | |
| level = asic3_read_register(asic, | |
| bank + ASIC3_GPIO_LevelTrigger); | |
| edge = asic3_read_register(asic, | |
| bank + ASIC3_GPIO_EdgeTrigger); | |
| trigger = asic3_read_register(asic, | |
| bank + ASIC3_GPIO_TriggerType); | |
| asic->irq_bothedge[(irq - asic->irq_base) >> 4] &= ~bit; | |
| if (type == IRQT_RISING) { | |
| trigger |= bit; | |
| edge |= bit; | |
| } else if (type == IRQT_FALLING) { | |
| trigger |= bit; | |
| edge &= ~bit; | |
| } else if (type == IRQT_BOTHEDGE) { | |
| trigger |= bit; | |
| if (asic3_gpio_get_value(asic, irq - asic->irq_base)) | |
| edge &= ~bit; | |
| else | |
| edge |= bit; | |
| asic->irq_bothedge[(irq - asic->irq_base) >> 4] |= bit; | |
| } else if (type == IRQT_LOW) { | |
| trigger &= ~bit; | |
| level &= ~bit; | |
| } else if (type == IRQT_HIGH) { | |
| trigger &= ~bit; | |
| level |= bit; | |
| } else { | |
| /* | |
| * if type == IRQT_NOEDGE, we should mask interrupts, but | |
| * be careful to not unmask them if mask was also called. | |
| * Probably need internal state for mask. | |
| */ | |
| printk(KERN_NOTICE "asic3: irq type not changed.\n"); | |
| } | |
| asic3_write_register(asic, bank + ASIC3_GPIO_LevelTrigger, | |
| level); | |
| asic3_write_register(asic, bank + ASIC3_GPIO_EdgeTrigger, | |
| edge); | |
| asic3_write_register(asic, bank + ASIC3_GPIO_TriggerType, | |
| trigger); | |
| spin_unlock_irqrestore(&asic->lock, flags); | |
| return 0; | |
| } | |
| static struct irq_chip asic3_gpio_irq_chip = { | |
| .name = "ASIC3-GPIO", | |
| .ack = asic3_mask_gpio_irq, | |
| .mask = asic3_mask_gpio_irq, | |
| .unmask = asic3_unmask_gpio_irq, | |
| .set_type = asic3_gpio_irq_type, | |
| }; | |
| static struct irq_chip asic3_irq_chip = { | |
| .name = "ASIC3", | |
| .ack = asic3_mask_irq, | |
| .mask = asic3_mask_irq, | |
| .unmask = asic3_unmask_irq, | |
| }; | |
| static int asic3_irq_probe(struct platform_device *pdev) | |
| { | |
| struct asic3 *asic = platform_get_drvdata(pdev); | |
| unsigned long clksel = 0; | |
| unsigned int irq, irq_base; | |
| asic->irq_nr = platform_get_irq(pdev, 0); | |
| if (asic->irq_nr < 0) | |
| return asic->irq_nr; | |
| /* turn on clock to IRQ controller */ | |
| clksel |= CLOCK_SEL_CX; | |
| asic3_write_register(asic, ASIC3_OFFSET(CLOCK, SEL), | |
| clksel); | |
| irq_base = asic->irq_base; | |
| for (irq = irq_base; irq < irq_base + ASIC3_NR_IRQS; irq++) { | |
| if (irq < asic->irq_base + ASIC3_NUM_GPIOS) | |
| set_irq_chip(irq, &asic3_gpio_irq_chip); | |
| else | |
| set_irq_chip(irq, &asic3_irq_chip); | |
| set_irq_chip_data(irq, asic); | |
| set_irq_handler(irq, handle_level_irq); | |
| set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); | |
| } | |
| asic3_write_register(asic, ASIC3_OFFSET(INTR, IntMask), | |
| ASIC3_INTMASK_GINTMASK); | |
| set_irq_chained_handler(asic->irq_nr, asic3_irq_demux); | |
| set_irq_type(asic->irq_nr, IRQT_RISING); | |
| set_irq_data(asic->irq_nr, asic); | |
| return 0; | |
| } | |
| static void asic3_irq_remove(struct platform_device *pdev) | |
| { | |
| struct asic3 *asic = platform_get_drvdata(pdev); | |
| unsigned int irq, irq_base; | |
| irq_base = asic->irq_base; | |
| for (irq = irq_base; irq < irq_base + ASIC3_NR_IRQS; irq++) { | |
| set_irq_flags(irq, 0); | |
| set_irq_handler(irq, NULL); | |
| set_irq_chip(irq, NULL); | |
| set_irq_chip_data(irq, NULL); | |
| } | |
| set_irq_chained_handler(asic->irq_nr, NULL); | |
| } | |
| /* GPIOs */ | |
| static inline u32 asic3_get_gpio(struct asic3 *asic, unsigned int base, | |
| unsigned int function) | |
| { | |
| return asic3_read_register(asic, base + function); | |
| } | |
| static void asic3_set_gpio(struct asic3 *asic, unsigned int base, | |
| unsigned int function, u32 bits, u32 val) | |
| { | |
| unsigned long flags; | |
| spin_lock_irqsave(&asic->lock, flags); | |
| val |= (asic3_read_register(asic, base + function) & ~bits); | |
| asic3_write_register(asic, base + function, val); | |
| spin_unlock_irqrestore(&asic->lock, flags); | |
| } | |
| #define asic3_get_gpio_a(asic, fn) \ | |
| asic3_get_gpio(asic, ASIC3_GPIO_A_Base, ASIC3_GPIO_##fn) | |
| #define asic3_get_gpio_b(asic, fn) \ | |
| asic3_get_gpio(asic, ASIC3_GPIO_B_Base, ASIC3_GPIO_##fn) | |
| #define asic3_get_gpio_c(asic, fn) \ | |
| asic3_get_gpio(asic, ASIC3_GPIO_C_Base, ASIC3_GPIO_##fn) | |
| #define asic3_get_gpio_d(asic, fn) \ | |
| asic3_get_gpio(asic, ASIC3_GPIO_D_Base, ASIC3_GPIO_##fn) | |
| #define asic3_set_gpio_a(asic, fn, bits, val) \ | |
| asic3_set_gpio(asic, ASIC3_GPIO_A_Base, ASIC3_GPIO_##fn, bits, val) | |
| #define asic3_set_gpio_b(asic, fn, bits, val) \ | |
| asic3_set_gpio(asic, ASIC3_GPIO_B_Base, ASIC3_GPIO_##fn, bits, val) | |
| #define asic3_set_gpio_c(asic, fn, bits, val) \ | |
| asic3_set_gpio(asic, ASIC3_GPIO_C_Base, ASIC3_GPIO_##fn, bits, val) | |
| #define asic3_set_gpio_d(asic, fn, bits, val) \ | |
| asic3_set_gpio(asic, ASIC3_GPIO_D_Base, ASIC3_GPIO_##fn, bits, val) | |
| #define asic3_set_gpio_banks(asic, fn, bits, pdata, field) \ | |
| do { \ | |
| asic3_set_gpio_a((asic), fn, (bits), (pdata)->gpio_a.field); \ | |
| asic3_set_gpio_b((asic), fn, (bits), (pdata)->gpio_b.field); \ | |
| asic3_set_gpio_c((asic), fn, (bits), (pdata)->gpio_c.field); \ | |
| asic3_set_gpio_d((asic), fn, (bits), (pdata)->gpio_d.field); \ | |
| } while (0) | |
| int asic3_gpio_get_value(struct asic3 *asic, unsigned gpio) | |
| { | |
| u32 mask = ASIC3_GPIO_bit(gpio); | |
| switch (gpio >> 4) { | |
| case ASIC3_GPIO_BANK_A: | |
| return asic3_get_gpio_a(asic, Status) & mask; | |
| case ASIC3_GPIO_BANK_B: | |
| return asic3_get_gpio_b(asic, Status) & mask; | |
| case ASIC3_GPIO_BANK_C: | |
| return asic3_get_gpio_c(asic, Status) & mask; | |
| case ASIC3_GPIO_BANK_D: | |
| return asic3_get_gpio_d(asic, Status) & mask; | |
| default: | |
| printk(KERN_ERR "%s: invalid GPIO value 0x%x", | |
| __func__, gpio); | |
| return -EINVAL; | |
| } | |
| } | |
| EXPORT_SYMBOL(asic3_gpio_get_value); | |
| void asic3_gpio_set_value(struct asic3 *asic, unsigned gpio, int val) | |
| { | |
| u32 mask = ASIC3_GPIO_bit(gpio); | |
| u32 bitval = 0; | |
| if (val) | |
| bitval = mask; | |
| switch (gpio >> 4) { | |
| case ASIC3_GPIO_BANK_A: | |
| asic3_set_gpio_a(asic, Out, mask, bitval); | |
| return; | |
| case ASIC3_GPIO_BANK_B: | |
| asic3_set_gpio_b(asic, Out, mask, bitval); | |
| return; | |
| case ASIC3_GPIO_BANK_C: | |
| asic3_set_gpio_c(asic, Out, mask, bitval); | |
| return; | |
| case ASIC3_GPIO_BANK_D: | |
| asic3_set_gpio_d(asic, Out, mask, bitval); | |
| return; | |
| default: | |
| printk(KERN_ERR "%s: invalid GPIO value 0x%x", | |
| __func__, gpio); | |
| return; | |
| } | |
| } | |
| EXPORT_SYMBOL(asic3_gpio_set_value); | |
| static int asic3_gpio_probe(struct platform_device *pdev) | |
| { | |
| struct asic3_platform_data *pdata = pdev->dev.platform_data; | |
| struct asic3 *asic = platform_get_drvdata(pdev); | |
| asic3_write_register(asic, ASIC3_GPIO_OFFSET(A, Mask), 0xffff); | |
| asic3_write_register(asic, ASIC3_GPIO_OFFSET(B, Mask), 0xffff); | |
| asic3_write_register(asic, ASIC3_GPIO_OFFSET(C, Mask), 0xffff); | |
| asic3_write_register(asic, ASIC3_GPIO_OFFSET(D, Mask), 0xffff); | |
| asic3_set_gpio_a(asic, SleepMask, 0xffff, 0xffff); | |
| asic3_set_gpio_b(asic, SleepMask, 0xffff, 0xffff); | |
| asic3_set_gpio_c(asic, SleepMask, 0xffff, 0xffff); | |
| asic3_set_gpio_d(asic, SleepMask, 0xffff, 0xffff); | |
| if (pdata) { | |
| asic3_set_gpio_banks(asic, Out, 0xffff, pdata, init); | |
| asic3_set_gpio_banks(asic, Direction, 0xffff, pdata, dir); | |
| asic3_set_gpio_banks(asic, SleepMask, 0xffff, pdata, | |
| sleep_mask); | |
| asic3_set_gpio_banks(asic, SleepOut, 0xffff, pdata, sleep_out); | |
| asic3_set_gpio_banks(asic, BattFaultOut, 0xffff, pdata, | |
| batt_fault_out); | |
| asic3_set_gpio_banks(asic, SleepConf, 0xffff, pdata, | |
| sleep_conf); | |
| asic3_set_gpio_banks(asic, AltFunction, 0xffff, pdata, | |
| alt_function); | |
| } | |
| return 0; | |
| } | |
| static void asic3_gpio_remove(struct platform_device *pdev) | |
| { | |
| return; | |
| } | |
| /* Core */ | |
| static int asic3_probe(struct platform_device *pdev) | |
| { | |
| struct asic3_platform_data *pdata = pdev->dev.platform_data; | |
| struct asic3 *asic; | |
| struct resource *mem; | |
| unsigned long clksel; | |
| int ret; | |
| asic = kzalloc(sizeof(struct asic3), GFP_KERNEL); | |
| if (!asic) | |
| return -ENOMEM; | |
| spin_lock_init(&asic->lock); | |
| platform_set_drvdata(pdev, asic); | |
| asic->dev = &pdev->dev; | |
| mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); | |
| if (!mem) { | |
| ret = -ENOMEM; | |
| printk(KERN_ERR "asic3: no MEM resource\n"); | |
| goto err_out_1; | |
| } | |
| asic->mapping = ioremap(mem->start, PAGE_SIZE); | |
| if (!asic->mapping) { | |
| ret = -ENOMEM; | |
| printk(KERN_ERR "asic3: couldn't ioremap\n"); | |
| goto err_out_1; | |
| } | |
| asic->irq_base = pdata->irq_base; | |
| if (pdata && pdata->bus_shift) | |
| asic->bus_shift = 2 - pdata->bus_shift; | |
| else | |
| asic->bus_shift = 0; | |
| clksel = 0; | |
| asic3_write_register(asic, ASIC3_OFFSET(CLOCK, SEL), clksel); | |
| ret = asic3_irq_probe(pdev); | |
| if (ret < 0) { | |
| printk(KERN_ERR "asic3: couldn't probe IRQs\n"); | |
| goto err_out_2; | |
| } | |
| asic3_gpio_probe(pdev); | |
| if (pdata->children) { | |
| int i; | |
| for (i = 0; i < pdata->n_children; i++) { | |
| pdata->children[i]->dev.parent = &pdev->dev; | |
| platform_device_register(pdata->children[i]); | |
| } | |
| } | |
| printk(KERN_INFO "ASIC3 Core driver\n"); | |
| return 0; | |
| err_out_2: | |
| iounmap(asic->mapping); | |
| err_out_1: | |
| kfree(asic); | |
| return ret; | |
| } | |
| static int asic3_remove(struct platform_device *pdev) | |
| { | |
| struct asic3 *asic = platform_get_drvdata(pdev); | |
| asic3_gpio_remove(pdev); | |
| asic3_irq_remove(pdev); | |
| asic3_write_register(asic, ASIC3_OFFSET(CLOCK, SEL), 0); | |
| iounmap(asic->mapping); | |
| kfree(asic); | |
| return 0; | |
| } | |
| static void asic3_shutdown(struct platform_device *pdev) | |
| { | |
| } | |
| static struct platform_driver asic3_device_driver = { | |
| .driver = { | |
| .name = "asic3", | |
| }, | |
| .probe = asic3_probe, | |
| .remove = __devexit_p(asic3_remove), | |
| .shutdown = asic3_shutdown, | |
| }; | |
| static int __init asic3_init(void) | |
| { | |
| int retval = 0; | |
| retval = platform_driver_register(&asic3_device_driver); | |
| return retval; | |
| } | |
| subsys_initcall(asic3_init); |