| # | |
| # Miscellaneous I2C chip drivers configuration | |
| # | |
| menu "Miscellaneous I2C Chip support" | |
| config DS1682 | |
| tristate "Dallas DS1682 Total Elapsed Time Recorder with Alarm" | |
| depends on EXPERIMENTAL | |
| help | |
| If you say yes here you get support for Dallas Semiconductor | |
| DS1682 Total Elapsed Time Recorder. | |
| This driver can also be built as a module. If so, the module | |
| will be called ds1682. | |
| config SENSORS_EEPROM | |
| tristate "EEPROM reader" | |
| depends on EXPERIMENTAL | |
| help | |
| If you say yes here you get read-only access to the EEPROM data | |
| available on modern memory DIMMs and Sony Vaio laptops. Such | |
| EEPROMs could theoretically be available on other devices as well. | |
| This driver can also be built as a module. If so, the module | |
| will be called eeprom. | |
| config SENSORS_PCF8574 | |
| tristate "Philips PCF8574 and PCF8574A" | |
| depends on EXPERIMENTAL | |
| default n | |
| help | |
| If you say yes here you get support for Philips PCF8574 and | |
| PCF8574A chips. These chips are 8-bit I/O expanders for the I2C bus. | |
| This driver can also be built as a module. If so, the module | |
| will be called pcf8574. | |
| These devices are hard to detect and rarely found on mainstream | |
| hardware. If unsure, say N. | |
| config PCF8575 | |
| tristate "Philips PCF8575" | |
| default n | |
| help | |
| If you say yes here you get support for Philips PCF8575 chip. | |
| This chip is a 16-bit I/O expander for the I2C bus. Several other | |
| chip manufacturers sell equivalent chips, e.g. Texas Instruments. | |
| This driver can also be built as a module. If so, the module | |
| will be called pcf8575. | |
| This device is hard to detect and is rarely found on mainstream | |
| hardware. If unsure, say N. | |
| config SENSORS_PCA9539 | |
| tristate "Philips PCA9539 16-bit I/O port (DEPRECATED)" | |
| depends on EXPERIMENTAL && GPIO_PCA9539 = "n" | |
| help | |
| If you say yes here you get support for the Philips PCA9539 | |
| 16-bit I/O port. | |
| This driver can also be built as a module. If so, the module | |
| will be called pca9539. | |
| This driver is deprecated and will be dropped soon. Use | |
| drivers/gpio/pca9539.c instead. | |
| config SENSORS_PCF8591 | |
| tristate "Philips PCF8591" | |
| depends on EXPERIMENTAL | |
| default n | |
| help | |
| If you say yes here you get support for Philips PCF8591 chips. | |
| This driver can also be built as a module. If so, the module | |
| will be called pcf8591. | |
| These devices are hard to detect and rarely found on mainstream | |
| hardware. If unsure, say N. | |
| config ISP1301_OMAP | |
| tristate "Philips ISP1301 with OMAP OTG" | |
| depends on ARCH_OMAP_OTG | |
| help | |
| If you say yes here you get support for the Philips ISP1301 | |
| USB-On-The-Go transceiver working with the OMAP OTG controller. | |
| The ISP1301 is used in products including H2 and H3 development | |
| boards for Texas Instruments OMAP processors. | |
| This driver can also be built as a module. If so, the module | |
| will be called isp1301_omap. | |
| config TPS65010 | |
| tristate "TPS6501x Power Management chips" | |
| depends on HAVE_GPIO_LIB | |
| default y if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_OSK | |
| help | |
| If you say yes here you get support for the TPS6501x series of | |
| Power Management chips. These include voltage regulators, | |
| lithium ion/polymer battery charging, and other features that | |
| are often used in portable devices like cell phones and cameras. | |
| This driver can also be built as a module. If so, the module | |
| will be called tps65010. | |
| config SENSORS_MAX6875 | |
| tristate "Maxim MAX6875 Power supply supervisor" | |
| depends on EXPERIMENTAL | |
| help | |
| If you say yes here you get support for the Maxim MAX6875 | |
| EEPROM-programmable, quad power-supply sequencer/supervisor. | |
| This provides an interface to program the EEPROM and reset the chip. | |
| This driver also supports the Maxim MAX6874 hex power-supply | |
| sequencer/supervisor if found at a compatible address. | |
| This driver can also be built as a module. If so, the module | |
| will be called max6875. | |
| config SENSORS_TSL2550 | |
| tristate "Taos TSL2550 ambient light sensor" | |
| depends on EXPERIMENTAL | |
| help | |
| If you say yes here you get support for the Taos TSL2550 | |
| ambient light sensor. | |
| This driver can also be built as a module. If so, the module | |
| will be called tsl2550. | |
| config MENELAUS | |
| bool "TWL92330/Menelaus PM chip" | |
| depends on I2C=y && ARCH_OMAP24XX | |
| help | |
| If you say yes here you get support for the Texas Instruments | |
| TWL92330/Menelaus Power Management chip. This include voltage | |
| regulators, Dual slot memory card tranceivers, real-time clock | |
| and other features that are often used in portable devices like | |
| cell phones and PDAs. | |
| endmenu |