| /* | |
| * DS1286 Real Time Clock interface for Linux | |
| * | |
| * Copyright (C) 1998, 1999, 2000 Ralf Baechle | |
| * | |
| * Based on code written by Paul Gortmaker. | |
| * | |
| * This driver allows use of the real time clock (built into nearly all | |
| * computers) from user space. It exports the /dev/rtc interface supporting | |
| * various ioctl() and also the /proc/rtc pseudo-file for status | |
| * information. | |
| * | |
| * The ioctls can be used to set the interrupt behaviour and generation rate | |
| * from the RTC via IRQ 8. Then the /dev/rtc interface can be used to make | |
| * use of these timer interrupts, be they interval or alarm based. | |
| * | |
| * The /dev/rtc interface will block on reads until an interrupt has been | |
| * received. If a RTC interrupt has already happened, it will output an | |
| * unsigned long and then block. The output value contains the interrupt | |
| * status in the low byte and the number of interrupts since the last read | |
| * in the remaining high bytes. The /dev/rtc interface can also be used with | |
| * the select(2) call. | |
| * | |
| * This program is free software; you can redistribute it and/or modify it | |
| * under the terms of the GNU General Public License as published by the | |
| * Free Software Foundation; either version 2 of the License, or (at your | |
| * option) any later version. | |
| */ | |
| #include <linux/ds1286.h> | |
| #include <linux/types.h> | |
| #include <linux/errno.h> | |
| #include <linux/miscdevice.h> | |
| #include <linux/slab.h> | |
| #include <linux/ioport.h> | |
| #include <linux/fcntl.h> | |
| #include <linux/init.h> | |
| #include <linux/poll.h> | |
| #include <linux/rtc.h> | |
| #include <linux/spinlock.h> | |
| #include <linux/bcd.h> | |
| #include <linux/proc_fs.h> | |
| #include <linux/jiffies.h> | |
| #include <asm/uaccess.h> | |
| #include <asm/system.h> | |
| #define DS1286_VERSION "1.0" | |
| /* | |
| * We sponge a minor off of the misc major. No need slurping | |
| * up another valuable major dev number for this. If you add | |
| * an ioctl, make sure you don't conflict with SPARC's RTC | |
| * ioctls. | |
| */ | |
| static DECLARE_WAIT_QUEUE_HEAD(ds1286_wait); | |
| static ssize_t ds1286_read(struct file *file, char *buf, | |
| size_t count, loff_t *ppos); | |
| static int ds1286_ioctl(struct inode *inode, struct file *file, | |
| unsigned int cmd, unsigned long arg); | |
| static unsigned int ds1286_poll(struct file *file, poll_table *wait); | |
| static void ds1286_get_alm_time (struct rtc_time *alm_tm); | |
| static void ds1286_get_time(struct rtc_time *rtc_tm); | |
| static int ds1286_set_time(struct rtc_time *rtc_tm); | |
| static inline unsigned char ds1286_is_updating(void); | |
| static DEFINE_SPINLOCK(ds1286_lock); | |
| static int ds1286_read_proc(char *page, char **start, off_t off, | |
| int count, int *eof, void *data); | |
| /* | |
| * Bits in rtc_status. (7 bits of room for future expansion) | |
| */ | |
| #define RTC_IS_OPEN 0x01 /* means /dev/rtc is in use */ | |
| #define RTC_TIMER_ON 0x02 /* missed irq timer active */ | |
| static unsigned char ds1286_status; /* bitmapped status byte. */ | |
| static unsigned char days_in_mo[] = { | |
| 0, 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 | |
| }; | |
| /* | |
| * Now all the various file operations that we export. | |
| */ | |
| static ssize_t ds1286_read(struct file *file, char *buf, | |
| size_t count, loff_t *ppos) | |
| { | |
| return -EIO; | |
| } | |
| static int ds1286_ioctl(struct inode *inode, struct file *file, | |
| unsigned int cmd, unsigned long arg) | |
| { | |
| struct rtc_time wtime; | |
| switch (cmd) { | |
| case RTC_AIE_OFF: /* Mask alarm int. enab. bit */ | |
| { | |
| unsigned long flags; | |
| unsigned char val; | |
| if (!capable(CAP_SYS_TIME)) | |
| return -EACCES; | |
| spin_lock_irqsave(&ds1286_lock, flags); | |
| val = rtc_read(RTC_CMD); | |
| val |= RTC_TDM; | |
| rtc_write(val, RTC_CMD); | |
| spin_unlock_irqrestore(&ds1286_lock, flags); | |
| return 0; | |
| } | |
| case RTC_AIE_ON: /* Allow alarm interrupts. */ | |
| { | |
| unsigned long flags; | |
| unsigned char val; | |
| if (!capable(CAP_SYS_TIME)) | |
| return -EACCES; | |
| spin_lock_irqsave(&ds1286_lock, flags); | |
| val = rtc_read(RTC_CMD); | |
| val &= ~RTC_TDM; | |
| rtc_write(val, RTC_CMD); | |
| spin_unlock_irqrestore(&ds1286_lock, flags); | |
| return 0; | |
| } | |
| case RTC_WIE_OFF: /* Mask watchdog int. enab. bit */ | |
| { | |
| unsigned long flags; | |
| unsigned char val; | |
| if (!capable(CAP_SYS_TIME)) | |
| return -EACCES; | |
| spin_lock_irqsave(&ds1286_lock, flags); | |
| val = rtc_read(RTC_CMD); | |
| val |= RTC_WAM; | |
| rtc_write(val, RTC_CMD); | |
| spin_unlock_irqrestore(&ds1286_lock, flags); | |
| return 0; | |
| } | |
| case RTC_WIE_ON: /* Allow watchdog interrupts. */ | |
| { | |
| unsigned long flags; | |
| unsigned char val; | |
| if (!capable(CAP_SYS_TIME)) | |
| return -EACCES; | |
| spin_lock_irqsave(&ds1286_lock, flags); | |
| val = rtc_read(RTC_CMD); | |
| val &= ~RTC_WAM; | |
| rtc_write(val, RTC_CMD); | |
| spin_unlock_irqrestore(&ds1286_lock, flags); | |
| return 0; | |
| } | |
| case RTC_ALM_READ: /* Read the present alarm time */ | |
| { | |
| /* | |
| * This returns a struct rtc_time. Reading >= 0xc0 | |
| * means "don't care" or "match all". Only the tm_hour, | |
| * tm_min, and tm_sec values are filled in. | |
| */ | |
| memset(&wtime, 0, sizeof(wtime)); | |
| ds1286_get_alm_time(&wtime); | |
| break; | |
| } | |
| case RTC_ALM_SET: /* Store a time into the alarm */ | |
| { | |
| /* | |
| * This expects a struct rtc_time. Writing 0xff means | |
| * "don't care" or "match all". Only the tm_hour, | |
| * tm_min and tm_sec are used. | |
| */ | |
| unsigned char hrs, min, sec; | |
| struct rtc_time alm_tm; | |
| if (!capable(CAP_SYS_TIME)) | |
| return -EACCES; | |
| if (copy_from_user(&alm_tm, (struct rtc_time*)arg, | |
| sizeof(struct rtc_time))) | |
| return -EFAULT; | |
| hrs = alm_tm.tm_hour; | |
| min = alm_tm.tm_min; | |
| sec = alm_tm.tm_sec; | |
| if (hrs >= 24) | |
| hrs = 0xff; | |
| if (min >= 60) | |
| min = 0xff; | |
| if (sec != 0) | |
| return -EINVAL; | |
| min = BIN2BCD(min); | |
| min = BIN2BCD(hrs); | |
| spin_lock(&ds1286_lock); | |
| rtc_write(hrs, RTC_HOURS_ALARM); | |
| rtc_write(min, RTC_MINUTES_ALARM); | |
| spin_unlock(&ds1286_lock); | |
| return 0; | |
| } | |
| case RTC_RD_TIME: /* Read the time/date from RTC */ | |
| { | |
| memset(&wtime, 0, sizeof(wtime)); | |
| ds1286_get_time(&wtime); | |
| break; | |
| } | |
| case RTC_SET_TIME: /* Set the RTC */ | |
| { | |
| struct rtc_time rtc_tm; | |
| if (!capable(CAP_SYS_TIME)) | |
| return -EACCES; | |
| if (copy_from_user(&rtc_tm, (struct rtc_time*)arg, | |
| sizeof(struct rtc_time))) | |
| return -EFAULT; | |
| return ds1286_set_time(&rtc_tm); | |
| } | |
| default: | |
| return -EINVAL; | |
| } | |
| return copy_to_user((void *)arg, &wtime, sizeof wtime) ? -EFAULT : 0; | |
| } | |
| /* | |
| * We enforce only one user at a time here with the open/close. | |
| * Also clear the previous interrupt data on an open, and clean | |
| * up things on a close. | |
| */ | |
| static int ds1286_open(struct inode *inode, struct file *file) | |
| { | |
| spin_lock_irq(&ds1286_lock); | |
| if (ds1286_status & RTC_IS_OPEN) | |
| goto out_busy; | |
| ds1286_status |= RTC_IS_OPEN; | |
| spin_unlock_irq(&ds1286_lock); | |
| return 0; | |
| out_busy: | |
| spin_lock_irq(&ds1286_lock); | |
| return -EBUSY; | |
| } | |
| static int ds1286_release(struct inode *inode, struct file *file) | |
| { | |
| ds1286_status &= ~RTC_IS_OPEN; | |
| return 0; | |
| } | |
| static unsigned int ds1286_poll(struct file *file, poll_table *wait) | |
| { | |
| poll_wait(file, &ds1286_wait, wait); | |
| return 0; | |
| } | |
| /* | |
| * The various file operations we support. | |
| */ | |
| static const struct file_operations ds1286_fops = { | |
| .llseek = no_llseek, | |
| .read = ds1286_read, | |
| .poll = ds1286_poll, | |
| .ioctl = ds1286_ioctl, | |
| .open = ds1286_open, | |
| .release = ds1286_release, | |
| }; | |
| static struct miscdevice ds1286_dev= | |
| { | |
| .minor = RTC_MINOR, | |
| .name = "rtc", | |
| .fops = &ds1286_fops, | |
| }; | |
| static int __init ds1286_init(void) | |
| { | |
| int err; | |
| printk(KERN_INFO "DS1286 Real Time Clock Driver v%s\n", DS1286_VERSION); | |
| err = misc_register(&ds1286_dev); | |
| if (err) | |
| goto out; | |
| if (!create_proc_read_entry("driver/rtc", 0, 0, ds1286_read_proc, NULL)) { | |
| err = -ENOMEM; | |
| goto out_deregister; | |
| } | |
| return 0; | |
| out_deregister: | |
| misc_deregister(&ds1286_dev); | |
| out: | |
| return err; | |
| } | |
| static void __exit ds1286_exit(void) | |
| { | |
| remove_proc_entry("driver/rtc", NULL); | |
| misc_deregister(&ds1286_dev); | |
| } | |
| static char *days[] = { | |
| "***", "Sun", "Mon", "Tue", "Wed", "Thu", "Fri", "Sat" | |
| }; | |
| /* | |
| * Info exported via "/proc/rtc". | |
| */ | |
| static int ds1286_proc_output(char *buf) | |
| { | |
| char *p, *s; | |
| struct rtc_time tm; | |
| unsigned char hundredth, month, cmd, amode; | |
| p = buf; | |
| ds1286_get_time(&tm); | |
| hundredth = rtc_read(RTC_HUNDREDTH_SECOND); | |
| BCD_TO_BIN(hundredth); | |
| p += sprintf(p, | |
| "rtc_time\t: %02d:%02d:%02d.%02d\n" | |
| "rtc_date\t: %04d-%02d-%02d\n", | |
| tm.tm_hour, tm.tm_min, tm.tm_sec, hundredth, | |
| tm.tm_year + 1900, tm.tm_mon + 1, tm.tm_mday); | |
| /* | |
| * We implicitly assume 24hr mode here. Alarm values >= 0xc0 will | |
| * match any value for that particular field. Values that are | |
| * greater than a valid time, but less than 0xc0 shouldn't appear. | |
| */ | |
| ds1286_get_alm_time(&tm); | |
| p += sprintf(p, "alarm\t\t: %s ", days[tm.tm_wday]); | |
| if (tm.tm_hour <= 24) | |
| p += sprintf(p, "%02d:", tm.tm_hour); | |
| else | |
| p += sprintf(p, "**:"); | |
| if (tm.tm_min <= 59) | |
| p += sprintf(p, "%02d\n", tm.tm_min); | |
| else | |
| p += sprintf(p, "**\n"); | |
| month = rtc_read(RTC_MONTH); | |
| p += sprintf(p, | |
| "oscillator\t: %s\n" | |
| "square_wave\t: %s\n", | |
| (month & RTC_EOSC) ? "disabled" : "enabled", | |
| (month & RTC_ESQW) ? "disabled" : "enabled"); | |
| amode = ((rtc_read(RTC_MINUTES_ALARM) & 0x80) >> 5) | | |
| ((rtc_read(RTC_HOURS_ALARM) & 0x80) >> 6) | | |
| ((rtc_read(RTC_DAY_ALARM) & 0x80) >> 7); | |
| if (amode == 7) s = "each minute"; | |
| else if (amode == 3) s = "minutes match"; | |
| else if (amode == 1) s = "hours and minutes match"; | |
| else if (amode == 0) s = "days, hours and minutes match"; | |
| else s = "invalid"; | |
| p += sprintf(p, "alarm_mode\t: %s\n", s); | |
| cmd = rtc_read(RTC_CMD); | |
| p += sprintf(p, | |
| "alarm_enable\t: %s\n" | |
| "wdog_alarm\t: %s\n" | |
| "alarm_mask\t: %s\n" | |
| "wdog_alarm_mask\t: %s\n" | |
| "interrupt_mode\t: %s\n" | |
| "INTB_mode\t: %s_active\n" | |
| "interrupt_pins\t: %s\n", | |
| (cmd & RTC_TDF) ? "yes" : "no", | |
| (cmd & RTC_WAF) ? "yes" : "no", | |
| (cmd & RTC_TDM) ? "disabled" : "enabled", | |
| (cmd & RTC_WAM) ? "disabled" : "enabled", | |
| (cmd & RTC_PU_LVL) ? "pulse" : "level", | |
| (cmd & RTC_IBH_LO) ? "low" : "high", | |
| (cmd & RTC_IPSW) ? "unswapped" : "swapped"); | |
| return p - buf; | |
| } | |
| static int ds1286_read_proc(char *page, char **start, off_t off, | |
| int count, int *eof, void *data) | |
| { | |
| int len = ds1286_proc_output (page); | |
| if (len <= off+count) *eof = 1; | |
| *start = page + off; | |
| len -= off; | |
| if (len>count) | |
| len = count; | |
| if (len<0) | |
| len = 0; | |
| return len; | |
| } | |
| /* | |
| * Returns true if a clock update is in progress | |
| */ | |
| static inline unsigned char ds1286_is_updating(void) | |
| { | |
| return rtc_read(RTC_CMD) & RTC_TE; | |
| } | |
| static void ds1286_get_time(struct rtc_time *rtc_tm) | |
| { | |
| unsigned char save_control; | |
| unsigned long flags; | |
| unsigned long uip_watchdog = jiffies; | |
| /* | |
| * read RTC once any update in progress is done. The update | |
| * can take just over 2ms. We wait 10 to 20ms. There is no need to | |
| * to poll-wait (up to 1s - eeccch) for the falling edge of RTC_UIP. | |
| * If you need to know *exactly* when a second has started, enable | |
| * periodic update complete interrupts, (via ioctl) and then | |
| * immediately read /dev/rtc which will block until you get the IRQ. | |
| * Once the read clears, read the RTC time (again via ioctl). Easy. | |
| */ | |
| if (ds1286_is_updating() != 0) | |
| while (time_before(jiffies, uip_watchdog + 2*HZ/100)) | |
| barrier(); | |
| /* | |
| * Only the values that we read from the RTC are set. We leave | |
| * tm_wday, tm_yday and tm_isdst untouched. Even though the | |
| * RTC has RTC_DAY_OF_WEEK, we ignore it, as it is only updated | |
| * by the RTC when initially set to a non-zero value. | |
| */ | |
| spin_lock_irqsave(&ds1286_lock, flags); | |
| save_control = rtc_read(RTC_CMD); | |
| rtc_write((save_control|RTC_TE), RTC_CMD); | |
| rtc_tm->tm_sec = rtc_read(RTC_SECONDS); | |
| rtc_tm->tm_min = rtc_read(RTC_MINUTES); | |
| rtc_tm->tm_hour = rtc_read(RTC_HOURS) & 0x3f; | |
| rtc_tm->tm_mday = rtc_read(RTC_DATE); | |
| rtc_tm->tm_mon = rtc_read(RTC_MONTH) & 0x1f; | |
| rtc_tm->tm_year = rtc_read(RTC_YEAR); | |
| rtc_write(save_control, RTC_CMD); | |
| spin_unlock_irqrestore(&ds1286_lock, flags); | |
| BCD_TO_BIN(rtc_tm->tm_sec); | |
| BCD_TO_BIN(rtc_tm->tm_min); | |
| BCD_TO_BIN(rtc_tm->tm_hour); | |
| BCD_TO_BIN(rtc_tm->tm_mday); | |
| BCD_TO_BIN(rtc_tm->tm_mon); | |
| BCD_TO_BIN(rtc_tm->tm_year); | |
| /* | |
| * Account for differences between how the RTC uses the values | |
| * and how they are defined in a struct rtc_time; | |
| */ | |
| if (rtc_tm->tm_year < 45) | |
| rtc_tm->tm_year += 30; | |
| if ((rtc_tm->tm_year += 40) < 70) | |
| rtc_tm->tm_year += 100; | |
| rtc_tm->tm_mon--; | |
| } | |
| static int ds1286_set_time(struct rtc_time *rtc_tm) | |
| { | |
| unsigned char mon, day, hrs, min, sec, leap_yr; | |
| unsigned char save_control; | |
| unsigned int yrs; | |
| unsigned long flags; | |
| yrs = rtc_tm->tm_year + 1900; | |
| mon = rtc_tm->tm_mon + 1; /* tm_mon starts at zero */ | |
| day = rtc_tm->tm_mday; | |
| hrs = rtc_tm->tm_hour; | |
| min = rtc_tm->tm_min; | |
| sec = rtc_tm->tm_sec; | |
| if (yrs < 1970) | |
| return -EINVAL; | |
| leap_yr = ((!(yrs % 4) && (yrs % 100)) || !(yrs % 400)); | |
| if ((mon > 12) || (day == 0)) | |
| return -EINVAL; | |
| if (day > (days_in_mo[mon] + ((mon == 2) && leap_yr))) | |
| return -EINVAL; | |
| if ((hrs >= 24) || (min >= 60) || (sec >= 60)) | |
| return -EINVAL; | |
| if ((yrs -= 1940) > 255) /* They are unsigned */ | |
| return -EINVAL; | |
| if (yrs >= 100) | |
| yrs -= 100; | |
| BIN_TO_BCD(sec); | |
| BIN_TO_BCD(min); | |
| BIN_TO_BCD(hrs); | |
| BIN_TO_BCD(day); | |
| BIN_TO_BCD(mon); | |
| BIN_TO_BCD(yrs); | |
| spin_lock_irqsave(&ds1286_lock, flags); | |
| save_control = rtc_read(RTC_CMD); | |
| rtc_write((save_control|RTC_TE), RTC_CMD); | |
| rtc_write(yrs, RTC_YEAR); | |
| rtc_write(mon, RTC_MONTH); | |
| rtc_write(day, RTC_DATE); | |
| rtc_write(hrs, RTC_HOURS); | |
| rtc_write(min, RTC_MINUTES); | |
| rtc_write(sec, RTC_SECONDS); | |
| rtc_write(0, RTC_HUNDREDTH_SECOND); | |
| rtc_write(save_control, RTC_CMD); | |
| spin_unlock_irqrestore(&ds1286_lock, flags); | |
| return 0; | |
| } | |
| static void ds1286_get_alm_time(struct rtc_time *alm_tm) | |
| { | |
| unsigned char cmd; | |
| unsigned long flags; | |
| /* | |
| * Only the values that we read from the RTC are set. That | |
| * means only tm_wday, tm_hour, tm_min. | |
| */ | |
| spin_lock_irqsave(&ds1286_lock, flags); | |
| alm_tm->tm_min = rtc_read(RTC_MINUTES_ALARM) & 0x7f; | |
| alm_tm->tm_hour = rtc_read(RTC_HOURS_ALARM) & 0x1f; | |
| alm_tm->tm_wday = rtc_read(RTC_DAY_ALARM) & 0x07; | |
| cmd = rtc_read(RTC_CMD); | |
| spin_unlock_irqrestore(&ds1286_lock, flags); | |
| BCD_TO_BIN(alm_tm->tm_min); | |
| BCD_TO_BIN(alm_tm->tm_hour); | |
| alm_tm->tm_sec = 0; | |
| } | |
| module_init(ds1286_init); | |
| module_exit(ds1286_exit); | |
| MODULE_AUTHOR("Ralf Baechle"); | |
| MODULE_LICENSE("GPL"); | |
| MODULE_ALIAS_MISCDEV(RTC_MINOR); |