| /* | |
| * processor_throttling.c - Throttling submodule of the ACPI processor driver | |
| * | |
| * Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com> | |
| * Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com> | |
| * Copyright (C) 2004 Dominik Brodowski <linux@brodo.de> | |
| * Copyright (C) 2004 Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> | |
| * - Added processor hotplug support | |
| * | |
| * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2 of the License, or (at | |
| * your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, but | |
| * WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU | |
| * General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License along | |
| * with this program; if not, write to the Free Software Foundation, Inc., | |
| * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. | |
| * | |
| * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/module.h> | |
| #include <linux/init.h> | |
| #include <linux/sched.h> | |
| #include <linux/cpufreq.h> | |
| #include <linux/proc_fs.h> | |
| #include <linux/seq_file.h> | |
| #include <asm/io.h> | |
| #include <asm/uaccess.h> | |
| #include <acpi/acpi_bus.h> | |
| #include <acpi/processor.h> | |
| #define ACPI_PROCESSOR_COMPONENT 0x01000000 | |
| #define ACPI_PROCESSOR_CLASS "processor" | |
| #define _COMPONENT ACPI_PROCESSOR_COMPONENT | |
| ACPI_MODULE_NAME("processor_throttling"); | |
| struct throttling_tstate { | |
| unsigned int cpu; /* cpu nr */ | |
| int target_state; /* target T-state */ | |
| }; | |
| #define THROTTLING_PRECHANGE (1) | |
| #define THROTTLING_POSTCHANGE (2) | |
| static int acpi_processor_get_throttling(struct acpi_processor *pr); | |
| int acpi_processor_set_throttling(struct acpi_processor *pr, int state); | |
| static int acpi_processor_update_tsd_coord(void) | |
| { | |
| int count, count_target; | |
| int retval = 0; | |
| unsigned int i, j; | |
| cpumask_t covered_cpus; | |
| struct acpi_processor *pr, *match_pr; | |
| struct acpi_tsd_package *pdomain, *match_pdomain; | |
| struct acpi_processor_throttling *pthrottling, *match_pthrottling; | |
| /* | |
| * Now that we have _TSD data from all CPUs, lets setup T-state | |
| * coordination between all CPUs. | |
| */ | |
| for_each_possible_cpu(i) { | |
| pr = processors[i]; | |
| if (!pr) | |
| continue; | |
| /* Basic validity check for domain info */ | |
| pthrottling = &(pr->throttling); | |
| /* | |
| * If tsd package for one cpu is invalid, the coordination | |
| * among all CPUs is thought as invalid. | |
| * Maybe it is ugly. | |
| */ | |
| if (!pthrottling->tsd_valid_flag) { | |
| retval = -EINVAL; | |
| break; | |
| } | |
| } | |
| if (retval) | |
| goto err_ret; | |
| cpus_clear(covered_cpus); | |
| for_each_possible_cpu(i) { | |
| pr = processors[i]; | |
| if (!pr) | |
| continue; | |
| if (cpu_isset(i, covered_cpus)) | |
| continue; | |
| pthrottling = &pr->throttling; | |
| pdomain = &(pthrottling->domain_info); | |
| cpu_set(i, pthrottling->shared_cpu_map); | |
| cpu_set(i, covered_cpus); | |
| /* | |
| * If the number of processor in the TSD domain is 1, it is | |
| * unnecessary to parse the coordination for this CPU. | |
| */ | |
| if (pdomain->num_processors <= 1) | |
| continue; | |
| /* Validate the Domain info */ | |
| count_target = pdomain->num_processors; | |
| count = 1; | |
| for_each_possible_cpu(j) { | |
| if (i == j) | |
| continue; | |
| match_pr = processors[j]; | |
| if (!match_pr) | |
| continue; | |
| match_pthrottling = &(match_pr->throttling); | |
| match_pdomain = &(match_pthrottling->domain_info); | |
| if (match_pdomain->domain != pdomain->domain) | |
| continue; | |
| /* Here i and j are in the same domain. | |
| * If two TSD packages have the same domain, they | |
| * should have the same num_porcessors and | |
| * coordination type. Otherwise it will be regarded | |
| * as illegal. | |
| */ | |
| if (match_pdomain->num_processors != count_target) { | |
| retval = -EINVAL; | |
| goto err_ret; | |
| } | |
| if (pdomain->coord_type != match_pdomain->coord_type) { | |
| retval = -EINVAL; | |
| goto err_ret; | |
| } | |
| cpu_set(j, covered_cpus); | |
| cpu_set(j, pthrottling->shared_cpu_map); | |
| count++; | |
| } | |
| for_each_possible_cpu(j) { | |
| if (i == j) | |
| continue; | |
| match_pr = processors[j]; | |
| if (!match_pr) | |
| continue; | |
| match_pthrottling = &(match_pr->throttling); | |
| match_pdomain = &(match_pthrottling->domain_info); | |
| if (match_pdomain->domain != pdomain->domain) | |
| continue; | |
| /* | |
| * If some CPUS have the same domain, they | |
| * will have the same shared_cpu_map. | |
| */ | |
| match_pthrottling->shared_cpu_map = | |
| pthrottling->shared_cpu_map; | |
| } | |
| } | |
| err_ret: | |
| for_each_possible_cpu(i) { | |
| pr = processors[i]; | |
| if (!pr) | |
| continue; | |
| /* | |
| * Assume no coordination on any error parsing domain info. | |
| * The coordination type will be forced as SW_ALL. | |
| */ | |
| if (retval) { | |
| pthrottling = &(pr->throttling); | |
| cpus_clear(pthrottling->shared_cpu_map); | |
| cpu_set(i, pthrottling->shared_cpu_map); | |
| pthrottling->shared_type = DOMAIN_COORD_TYPE_SW_ALL; | |
| } | |
| } | |
| return retval; | |
| } | |
| /* | |
| * Update the T-state coordination after the _TSD | |
| * data for all cpus is obtained. | |
| */ | |
| void acpi_processor_throttling_init(void) | |
| { | |
| if (acpi_processor_update_tsd_coord()) | |
| ACPI_DEBUG_PRINT((ACPI_DB_INFO, | |
| "Assume no T-state coordination\n")); | |
| return; | |
| } | |
| static int acpi_processor_throttling_notifier(unsigned long event, void *data) | |
| { | |
| struct throttling_tstate *p_tstate = data; | |
| struct acpi_processor *pr; | |
| unsigned int cpu ; | |
| int target_state; | |
| struct acpi_processor_limit *p_limit; | |
| struct acpi_processor_throttling *p_throttling; | |
| cpu = p_tstate->cpu; | |
| pr = processors[cpu]; | |
| if (!pr) { | |
| ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Invalid pr pointer\n")); | |
| return 0; | |
| } | |
| if (!pr->flags.throttling) { | |
| ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Throttling control is " | |
| "unsupported on CPU %d\n", cpu)); | |
| return 0; | |
| } | |
| target_state = p_tstate->target_state; | |
| p_throttling = &(pr->throttling); | |
| switch (event) { | |
| case THROTTLING_PRECHANGE: | |
| /* | |
| * Prechange event is used to choose one proper t-state, | |
| * which meets the limits of thermal, user and _TPC. | |
| */ | |
| p_limit = &pr->limit; | |
| if (p_limit->thermal.tx > target_state) | |
| target_state = p_limit->thermal.tx; | |
| if (p_limit->user.tx > target_state) | |
| target_state = p_limit->user.tx; | |
| if (pr->throttling_platform_limit > target_state) | |
| target_state = pr->throttling_platform_limit; | |
| if (target_state >= p_throttling->state_count) { | |
| printk(KERN_WARNING | |
| "Exceed the limit of T-state \n"); | |
| target_state = p_throttling->state_count - 1; | |
| } | |
| p_tstate->target_state = target_state; | |
| ACPI_DEBUG_PRINT((ACPI_DB_INFO, "PreChange Event:" | |
| "target T-state of CPU %d is T%d\n", | |
| cpu, target_state)); | |
| break; | |
| case THROTTLING_POSTCHANGE: | |
| /* | |
| * Postchange event is only used to update the | |
| * T-state flag of acpi_processor_throttling. | |
| */ | |
| p_throttling->state = target_state; | |
| ACPI_DEBUG_PRINT((ACPI_DB_INFO, "PostChange Event:" | |
| "CPU %d is switched to T%d\n", | |
| cpu, target_state)); | |
| break; | |
| default: | |
| printk(KERN_WARNING | |
| "Unsupported Throttling notifier event\n"); | |
| break; | |
| } | |
| return 0; | |
| } | |
| /* | |
| * _TPC - Throttling Present Capabilities | |
| */ | |
| static int acpi_processor_get_platform_limit(struct acpi_processor *pr) | |
| { | |
| acpi_status status = 0; | |
| unsigned long tpc = 0; | |
| if (!pr) | |
| return -EINVAL; | |
| status = acpi_evaluate_integer(pr->handle, "_TPC", NULL, &tpc); | |
| if (ACPI_FAILURE(status)) { | |
| if (status != AE_NOT_FOUND) { | |
| ACPI_EXCEPTION((AE_INFO, status, "Evaluating _TPC")); | |
| } | |
| return -ENODEV; | |
| } | |
| pr->throttling_platform_limit = (int)tpc; | |
| return 0; | |
| } | |
| int acpi_processor_tstate_has_changed(struct acpi_processor *pr) | |
| { | |
| int result = 0; | |
| int throttling_limit; | |
| int current_state; | |
| struct acpi_processor_limit *limit; | |
| int target_state; | |
| result = acpi_processor_get_platform_limit(pr); | |
| if (result) { | |
| /* Throttling Limit is unsupported */ | |
| return result; | |
| } | |
| throttling_limit = pr->throttling_platform_limit; | |
| if (throttling_limit >= pr->throttling.state_count) { | |
| /* Uncorrect Throttling Limit */ | |
| return -EINVAL; | |
| } | |
| current_state = pr->throttling.state; | |
| if (current_state > throttling_limit) { | |
| /* | |
| * The current state can meet the requirement of | |
| * _TPC limit. But it is reasonable that OSPM changes | |
| * t-states from high to low for better performance. | |
| * Of course the limit condition of thermal | |
| * and user should be considered. | |
| */ | |
| limit = &pr->limit; | |
| target_state = throttling_limit; | |
| if (limit->thermal.tx > target_state) | |
| target_state = limit->thermal.tx; | |
| if (limit->user.tx > target_state) | |
| target_state = limit->user.tx; | |
| } else if (current_state == throttling_limit) { | |
| /* | |
| * Unnecessary to change the throttling state | |
| */ | |
| return 0; | |
| } else { | |
| /* | |
| * If the current state is lower than the limit of _TPC, it | |
| * will be forced to switch to the throttling state defined | |
| * by throttling_platfor_limit. | |
| * Because the previous state meets with the limit condition | |
| * of thermal and user, it is unnecessary to check it again. | |
| */ | |
| target_state = throttling_limit; | |
| } | |
| return acpi_processor_set_throttling(pr, target_state); | |
| } | |
| /* | |
| * _PTC - Processor Throttling Control (and status) register location | |
| */ | |
| static int acpi_processor_get_throttling_control(struct acpi_processor *pr) | |
| { | |
| int result = 0; | |
| acpi_status status = 0; | |
| struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; | |
| union acpi_object *ptc = NULL; | |
| union acpi_object obj = { 0 }; | |
| struct acpi_processor_throttling *throttling; | |
| status = acpi_evaluate_object(pr->handle, "_PTC", NULL, &buffer); | |
| if (ACPI_FAILURE(status)) { | |
| if (status != AE_NOT_FOUND) { | |
| ACPI_EXCEPTION((AE_INFO, status, "Evaluating _PTC")); | |
| } | |
| return -ENODEV; | |
| } | |
| ptc = (union acpi_object *)buffer.pointer; | |
| if (!ptc || (ptc->type != ACPI_TYPE_PACKAGE) | |
| || (ptc->package.count != 2)) { | |
| printk(KERN_ERR PREFIX "Invalid _PTC data\n"); | |
| result = -EFAULT; | |
| goto end; | |
| } | |
| /* | |
| * control_register | |
| */ | |
| obj = ptc->package.elements[0]; | |
| if ((obj.type != ACPI_TYPE_BUFFER) | |
| || (obj.buffer.length < sizeof(struct acpi_ptc_register)) | |
| || (obj.buffer.pointer == NULL)) { | |
| printk(KERN_ERR PREFIX | |
| "Invalid _PTC data (control_register)\n"); | |
| result = -EFAULT; | |
| goto end; | |
| } | |
| memcpy(&pr->throttling.control_register, obj.buffer.pointer, | |
| sizeof(struct acpi_ptc_register)); | |
| /* | |
| * status_register | |
| */ | |
| obj = ptc->package.elements[1]; | |
| if ((obj.type != ACPI_TYPE_BUFFER) | |
| || (obj.buffer.length < sizeof(struct acpi_ptc_register)) | |
| || (obj.buffer.pointer == NULL)) { | |
| printk(KERN_ERR PREFIX "Invalid _PTC data (status_register)\n"); | |
| result = -EFAULT; | |
| goto end; | |
| } | |
| memcpy(&pr->throttling.status_register, obj.buffer.pointer, | |
| sizeof(struct acpi_ptc_register)); | |
| throttling = &pr->throttling; | |
| if ((throttling->control_register.bit_width + | |
| throttling->control_register.bit_offset) > 32) { | |
| printk(KERN_ERR PREFIX "Invalid _PTC control register\n"); | |
| result = -EFAULT; | |
| goto end; | |
| } | |
| if ((throttling->status_register.bit_width + | |
| throttling->status_register.bit_offset) > 32) { | |
| printk(KERN_ERR PREFIX "Invalid _PTC status register\n"); | |
| result = -EFAULT; | |
| goto end; | |
| } | |
| end: | |
| kfree(buffer.pointer); | |
| return result; | |
| } | |
| /* | |
| * _TSS - Throttling Supported States | |
| */ | |
| static int acpi_processor_get_throttling_states(struct acpi_processor *pr) | |
| { | |
| int result = 0; | |
| acpi_status status = AE_OK; | |
| struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; | |
| struct acpi_buffer format = { sizeof("NNNNN"), "NNNNN" }; | |
| struct acpi_buffer state = { 0, NULL }; | |
| union acpi_object *tss = NULL; | |
| int i; | |
| status = acpi_evaluate_object(pr->handle, "_TSS", NULL, &buffer); | |
| if (ACPI_FAILURE(status)) { | |
| if (status != AE_NOT_FOUND) { | |
| ACPI_EXCEPTION((AE_INFO, status, "Evaluating _TSS")); | |
| } | |
| return -ENODEV; | |
| } | |
| tss = buffer.pointer; | |
| if (!tss || (tss->type != ACPI_TYPE_PACKAGE)) { | |
| printk(KERN_ERR PREFIX "Invalid _TSS data\n"); | |
| result = -EFAULT; | |
| goto end; | |
| } | |
| ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found %d throttling states\n", | |
| tss->package.count)); | |
| pr->throttling.state_count = tss->package.count; | |
| pr->throttling.states_tss = | |
| kmalloc(sizeof(struct acpi_processor_tx_tss) * tss->package.count, | |
| GFP_KERNEL); | |
| if (!pr->throttling.states_tss) { | |
| result = -ENOMEM; | |
| goto end; | |
| } | |
| for (i = 0; i < pr->throttling.state_count; i++) { | |
| struct acpi_processor_tx_tss *tx = | |
| (struct acpi_processor_tx_tss *)&(pr->throttling. | |
| states_tss[i]); | |
| state.length = sizeof(struct acpi_processor_tx_tss); | |
| state.pointer = tx; | |
| ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Extracting state %d\n", i)); | |
| status = acpi_extract_package(&(tss->package.elements[i]), | |
| &format, &state); | |
| if (ACPI_FAILURE(status)) { | |
| ACPI_EXCEPTION((AE_INFO, status, "Invalid _TSS data")); | |
| result = -EFAULT; | |
| kfree(pr->throttling.states_tss); | |
| goto end; | |
| } | |
| if (!tx->freqpercentage) { | |
| printk(KERN_ERR PREFIX | |
| "Invalid _TSS data: freq is zero\n"); | |
| result = -EFAULT; | |
| kfree(pr->throttling.states_tss); | |
| goto end; | |
| } | |
| } | |
| end: | |
| kfree(buffer.pointer); | |
| return result; | |
| } | |
| /* | |
| * _TSD - T-State Dependencies | |
| */ | |
| static int acpi_processor_get_tsd(struct acpi_processor *pr) | |
| { | |
| int result = 0; | |
| acpi_status status = AE_OK; | |
| struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; | |
| struct acpi_buffer format = { sizeof("NNNNN"), "NNNNN" }; | |
| struct acpi_buffer state = { 0, NULL }; | |
| union acpi_object *tsd = NULL; | |
| struct acpi_tsd_package *pdomain; | |
| struct acpi_processor_throttling *pthrottling; | |
| pthrottling = &pr->throttling; | |
| pthrottling->tsd_valid_flag = 0; | |
| status = acpi_evaluate_object(pr->handle, "_TSD", NULL, &buffer); | |
| if (ACPI_FAILURE(status)) { | |
| if (status != AE_NOT_FOUND) { | |
| ACPI_EXCEPTION((AE_INFO, status, "Evaluating _TSD")); | |
| } | |
| return -ENODEV; | |
| } | |
| tsd = buffer.pointer; | |
| if (!tsd || (tsd->type != ACPI_TYPE_PACKAGE)) { | |
| ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid _TSD data\n")); | |
| result = -EFAULT; | |
| goto end; | |
| } | |
| if (tsd->package.count != 1) { | |
| ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid _TSD data\n")); | |
| result = -EFAULT; | |
| goto end; | |
| } | |
| pdomain = &(pr->throttling.domain_info); | |
| state.length = sizeof(struct acpi_tsd_package); | |
| state.pointer = pdomain; | |
| status = acpi_extract_package(&(tsd->package.elements[0]), | |
| &format, &state); | |
| if (ACPI_FAILURE(status)) { | |
| ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid _TSD data\n")); | |
| result = -EFAULT; | |
| goto end; | |
| } | |
| if (pdomain->num_entries != ACPI_TSD_REV0_ENTRIES) { | |
| ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Unknown _TSD:num_entries\n")); | |
| result = -EFAULT; | |
| goto end; | |
| } | |
| if (pdomain->revision != ACPI_TSD_REV0_REVISION) { | |
| ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Unknown _TSD:revision\n")); | |
| result = -EFAULT; | |
| goto end; | |
| } | |
| pthrottling = &pr->throttling; | |
| pthrottling->tsd_valid_flag = 1; | |
| pthrottling->shared_type = pdomain->coord_type; | |
| cpu_set(pr->id, pthrottling->shared_cpu_map); | |
| /* | |
| * If the coordination type is not defined in ACPI spec, | |
| * the tsd_valid_flag will be clear and coordination type | |
| * will be forecd as DOMAIN_COORD_TYPE_SW_ALL. | |
| */ | |
| if (pdomain->coord_type != DOMAIN_COORD_TYPE_SW_ALL && | |
| pdomain->coord_type != DOMAIN_COORD_TYPE_SW_ANY && | |
| pdomain->coord_type != DOMAIN_COORD_TYPE_HW_ALL) { | |
| pthrottling->tsd_valid_flag = 0; | |
| pthrottling->shared_type = DOMAIN_COORD_TYPE_SW_ALL; | |
| } | |
| end: | |
| kfree(buffer.pointer); | |
| return result; | |
| } | |
| /* -------------------------------------------------------------------------- | |
| Throttling Control | |
| -------------------------------------------------------------------------- */ | |
| static int acpi_processor_get_throttling_fadt(struct acpi_processor *pr) | |
| { | |
| int state = 0; | |
| u32 value = 0; | |
| u32 duty_mask = 0; | |
| u32 duty_value = 0; | |
| if (!pr) | |
| return -EINVAL; | |
| if (!pr->flags.throttling) | |
| return -ENODEV; | |
| pr->throttling.state = 0; | |
| duty_mask = pr->throttling.state_count - 1; | |
| duty_mask <<= pr->throttling.duty_offset; | |
| local_irq_disable(); | |
| value = inl(pr->throttling.address); | |
| /* | |
| * Compute the current throttling state when throttling is enabled | |
| * (bit 4 is on). | |
| */ | |
| if (value & 0x10) { | |
| duty_value = value & duty_mask; | |
| duty_value >>= pr->throttling.duty_offset; | |
| if (duty_value) | |
| state = pr->throttling.state_count - duty_value; | |
| } | |
| pr->throttling.state = state; | |
| local_irq_enable(); | |
| ACPI_DEBUG_PRINT((ACPI_DB_INFO, | |
| "Throttling state is T%d (%d%% throttling applied)\n", | |
| state, pr->throttling.states[state].performance)); | |
| return 0; | |
| } | |
| #ifdef CONFIG_X86 | |
| static int acpi_throttling_rdmsr(struct acpi_processor *pr, | |
| acpi_integer * value) | |
| { | |
| struct cpuinfo_x86 *c; | |
| u64 msr_high, msr_low; | |
| unsigned int cpu; | |
| u64 msr = 0; | |
| int ret = -1; | |
| cpu = pr->id; | |
| c = &cpu_data(cpu); | |
| if ((c->x86_vendor != X86_VENDOR_INTEL) || | |
| !cpu_has(c, X86_FEATURE_ACPI)) { | |
| printk(KERN_ERR PREFIX | |
| "HARDWARE addr space,NOT supported yet\n"); | |
| } else { | |
| msr_low = 0; | |
| msr_high = 0; | |
| rdmsr_safe(MSR_IA32_THERM_CONTROL, | |
| (u32 *)&msr_low , (u32 *) &msr_high); | |
| msr = (msr_high << 32) | msr_low; | |
| *value = (acpi_integer) msr; | |
| ret = 0; | |
| } | |
| return ret; | |
| } | |
| static int acpi_throttling_wrmsr(struct acpi_processor *pr, acpi_integer value) | |
| { | |
| struct cpuinfo_x86 *c; | |
| unsigned int cpu; | |
| int ret = -1; | |
| u64 msr; | |
| cpu = pr->id; | |
| c = &cpu_data(cpu); | |
| if ((c->x86_vendor != X86_VENDOR_INTEL) || | |
| !cpu_has(c, X86_FEATURE_ACPI)) { | |
| printk(KERN_ERR PREFIX | |
| "HARDWARE addr space,NOT supported yet\n"); | |
| } else { | |
| msr = value; | |
| wrmsr_safe(MSR_IA32_THERM_CONTROL, | |
| msr & 0xffffffff, msr >> 32); | |
| ret = 0; | |
| } | |
| return ret; | |
| } | |
| #else | |
| static int acpi_throttling_rdmsr(struct acpi_processor *pr, | |
| acpi_integer * value) | |
| { | |
| printk(KERN_ERR PREFIX | |
| "HARDWARE addr space,NOT supported yet\n"); | |
| return -1; | |
| } | |
| static int acpi_throttling_wrmsr(struct acpi_processor *pr, acpi_integer value) | |
| { | |
| printk(KERN_ERR PREFIX | |
| "HARDWARE addr space,NOT supported yet\n"); | |
| return -1; | |
| } | |
| #endif | |
| static int acpi_read_throttling_status(struct acpi_processor *pr, | |
| acpi_integer *value) | |
| { | |
| u32 bit_width, bit_offset; | |
| u64 ptc_value; | |
| u64 ptc_mask; | |
| struct acpi_processor_throttling *throttling; | |
| int ret = -1; | |
| throttling = &pr->throttling; | |
| switch (throttling->status_register.space_id) { | |
| case ACPI_ADR_SPACE_SYSTEM_IO: | |
| ptc_value = 0; | |
| bit_width = throttling->status_register.bit_width; | |
| bit_offset = throttling->status_register.bit_offset; | |
| acpi_os_read_port((acpi_io_address) throttling->status_register. | |
| address, (u32 *) &ptc_value, | |
| (u32) (bit_width + bit_offset)); | |
| ptc_mask = (1 << bit_width) - 1; | |
| *value = (acpi_integer) ((ptc_value >> bit_offset) & ptc_mask); | |
| ret = 0; | |
| break; | |
| case ACPI_ADR_SPACE_FIXED_HARDWARE: | |
| ret = acpi_throttling_rdmsr(pr, value); | |
| break; | |
| default: | |
| printk(KERN_ERR PREFIX "Unknown addr space %d\n", | |
| (u32) (throttling->status_register.space_id)); | |
| } | |
| return ret; | |
| } | |
| static int acpi_write_throttling_state(struct acpi_processor *pr, | |
| acpi_integer value) | |
| { | |
| u32 bit_width, bit_offset; | |
| u64 ptc_value; | |
| u64 ptc_mask; | |
| struct acpi_processor_throttling *throttling; | |
| int ret = -1; | |
| throttling = &pr->throttling; | |
| switch (throttling->control_register.space_id) { | |
| case ACPI_ADR_SPACE_SYSTEM_IO: | |
| bit_width = throttling->control_register.bit_width; | |
| bit_offset = throttling->control_register.bit_offset; | |
| ptc_mask = (1 << bit_width) - 1; | |
| ptc_value = value & ptc_mask; | |
| acpi_os_write_port((acpi_io_address) throttling-> | |
| control_register.address, | |
| (u32) (ptc_value << bit_offset), | |
| (u32) (bit_width + bit_offset)); | |
| ret = 0; | |
| break; | |
| case ACPI_ADR_SPACE_FIXED_HARDWARE: | |
| ret = acpi_throttling_wrmsr(pr, value); | |
| break; | |
| default: | |
| printk(KERN_ERR PREFIX "Unknown addr space %d\n", | |
| (u32) (throttling->control_register.space_id)); | |
| } | |
| return ret; | |
| } | |
| static int acpi_get_throttling_state(struct acpi_processor *pr, | |
| acpi_integer value) | |
| { | |
| int i; | |
| for (i = 0; i < pr->throttling.state_count; i++) { | |
| struct acpi_processor_tx_tss *tx = | |
| (struct acpi_processor_tx_tss *)&(pr->throttling. | |
| states_tss[i]); | |
| if (tx->control == value) | |
| break; | |
| } | |
| if (i > pr->throttling.state_count) | |
| i = -1; | |
| return i; | |
| } | |
| static int acpi_get_throttling_value(struct acpi_processor *pr, | |
| int state, acpi_integer *value) | |
| { | |
| int ret = -1; | |
| if (state >= 0 && state <= pr->throttling.state_count) { | |
| struct acpi_processor_tx_tss *tx = | |
| (struct acpi_processor_tx_tss *)&(pr->throttling. | |
| states_tss[state]); | |
| *value = tx->control; | |
| ret = 0; | |
| } | |
| return ret; | |
| } | |
| static int acpi_processor_get_throttling_ptc(struct acpi_processor *pr) | |
| { | |
| int state = 0; | |
| int ret; | |
| acpi_integer value; | |
| if (!pr) | |
| return -EINVAL; | |
| if (!pr->flags.throttling) | |
| return -ENODEV; | |
| pr->throttling.state = 0; | |
| value = 0; | |
| ret = acpi_read_throttling_status(pr, &value); | |
| if (ret >= 0) { | |
| state = acpi_get_throttling_state(pr, value); | |
| pr->throttling.state = state; | |
| } | |
| return 0; | |
| } | |
| static int acpi_processor_get_throttling(struct acpi_processor *pr) | |
| { | |
| cpumask_t saved_mask; | |
| int ret; | |
| if (!pr) | |
| return -EINVAL; | |
| if (!pr->flags.throttling) | |
| return -ENODEV; | |
| /* | |
| * Migrate task to the cpu pointed by pr. | |
| */ | |
| saved_mask = current->cpus_allowed; | |
| set_cpus_allowed_ptr(current, &cpumask_of_cpu(pr->id)); | |
| ret = pr->throttling.acpi_processor_get_throttling(pr); | |
| /* restore the previous state */ | |
| set_cpus_allowed_ptr(current, &saved_mask); | |
| return ret; | |
| } | |
| static int acpi_processor_get_fadt_info(struct acpi_processor *pr) | |
| { | |
| int i, step; | |
| if (!pr->throttling.address) { | |
| ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No throttling register\n")); | |
| return -EINVAL; | |
| } else if (!pr->throttling.duty_width) { | |
| ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No throttling states\n")); | |
| return -EINVAL; | |
| } | |
| /* TBD: Support duty_cycle values that span bit 4. */ | |
| else if ((pr->throttling.duty_offset + pr->throttling.duty_width) > 4) { | |
| printk(KERN_WARNING PREFIX "duty_cycle spans bit 4\n"); | |
| return -EINVAL; | |
| } | |
| pr->throttling.state_count = 1 << acpi_gbl_FADT.duty_width; | |
| /* | |
| * Compute state values. Note that throttling displays a linear power | |
| * performance relationship (at 50% performance the CPU will consume | |
| * 50% power). Values are in 1/10th of a percent to preserve accuracy. | |
| */ | |
| step = (1000 / pr->throttling.state_count); | |
| for (i = 0; i < pr->throttling.state_count; i++) { | |
| pr->throttling.states[i].performance = 1000 - step * i; | |
| pr->throttling.states[i].power = 1000 - step * i; | |
| } | |
| return 0; | |
| } | |
| static int acpi_processor_set_throttling_fadt(struct acpi_processor *pr, | |
| int state) | |
| { | |
| u32 value = 0; | |
| u32 duty_mask = 0; | |
| u32 duty_value = 0; | |
| if (!pr) | |
| return -EINVAL; | |
| if ((state < 0) || (state > (pr->throttling.state_count - 1))) | |
| return -EINVAL; | |
| if (!pr->flags.throttling) | |
| return -ENODEV; | |
| if (state == pr->throttling.state) | |
| return 0; | |
| if (state < pr->throttling_platform_limit) | |
| return -EPERM; | |
| /* | |
| * Calculate the duty_value and duty_mask. | |
| */ | |
| if (state) { | |
| duty_value = pr->throttling.state_count - state; | |
| duty_value <<= pr->throttling.duty_offset; | |
| /* Used to clear all duty_value bits */ | |
| duty_mask = pr->throttling.state_count - 1; | |
| duty_mask <<= acpi_gbl_FADT.duty_offset; | |
| duty_mask = ~duty_mask; | |
| } | |
| local_irq_disable(); | |
| /* | |
| * Disable throttling by writing a 0 to bit 4. Note that we must | |
| * turn it off before you can change the duty_value. | |
| */ | |
| value = inl(pr->throttling.address); | |
| if (value & 0x10) { | |
| value &= 0xFFFFFFEF; | |
| outl(value, pr->throttling.address); | |
| } | |
| /* | |
| * Write the new duty_value and then enable throttling. Note | |
| * that a state value of 0 leaves throttling disabled. | |
| */ | |
| if (state) { | |
| value &= duty_mask; | |
| value |= duty_value; | |
| outl(value, pr->throttling.address); | |
| value |= 0x00000010; | |
| outl(value, pr->throttling.address); | |
| } | |
| pr->throttling.state = state; | |
| local_irq_enable(); | |
| ACPI_DEBUG_PRINT((ACPI_DB_INFO, | |
| "Throttling state set to T%d (%d%%)\n", state, | |
| (pr->throttling.states[state].performance ? pr-> | |
| throttling.states[state].performance / 10 : 0))); | |
| return 0; | |
| } | |
| static int acpi_processor_set_throttling_ptc(struct acpi_processor *pr, | |
| int state) | |
| { | |
| int ret; | |
| acpi_integer value; | |
| if (!pr) | |
| return -EINVAL; | |
| if ((state < 0) || (state > (pr->throttling.state_count - 1))) | |
| return -EINVAL; | |
| if (!pr->flags.throttling) | |
| return -ENODEV; | |
| if (state == pr->throttling.state) | |
| return 0; | |
| if (state < pr->throttling_platform_limit) | |
| return -EPERM; | |
| value = 0; | |
| ret = acpi_get_throttling_value(pr, state, &value); | |
| if (ret >= 0) { | |
| acpi_write_throttling_state(pr, value); | |
| pr->throttling.state = state; | |
| } | |
| return 0; | |
| } | |
| int acpi_processor_set_throttling(struct acpi_processor *pr, int state) | |
| { | |
| cpumask_t saved_mask; | |
| int ret = 0; | |
| unsigned int i; | |
| struct acpi_processor *match_pr; | |
| struct acpi_processor_throttling *p_throttling; | |
| struct throttling_tstate t_state; | |
| cpumask_t online_throttling_cpus; | |
| if (!pr) | |
| return -EINVAL; | |
| if (!pr->flags.throttling) | |
| return -ENODEV; | |
| if ((state < 0) || (state > (pr->throttling.state_count - 1))) | |
| return -EINVAL; | |
| saved_mask = current->cpus_allowed; | |
| t_state.target_state = state; | |
| p_throttling = &(pr->throttling); | |
| cpus_and(online_throttling_cpus, cpu_online_map, | |
| p_throttling->shared_cpu_map); | |
| /* | |
| * The throttling notifier will be called for every | |
| * affected cpu in order to get one proper T-state. | |
| * The notifier event is THROTTLING_PRECHANGE. | |
| */ | |
| for_each_cpu_mask(i, online_throttling_cpus) { | |
| t_state.cpu = i; | |
| acpi_processor_throttling_notifier(THROTTLING_PRECHANGE, | |
| &t_state); | |
| } | |
| /* | |
| * The function of acpi_processor_set_throttling will be called | |
| * to switch T-state. If the coordination type is SW_ALL or HW_ALL, | |
| * it is necessary to call it for every affected cpu. Otherwise | |
| * it can be called only for the cpu pointed by pr. | |
| */ | |
| if (p_throttling->shared_type == DOMAIN_COORD_TYPE_SW_ANY) { | |
| set_cpus_allowed_ptr(current, &cpumask_of_cpu(pr->id)); | |
| ret = p_throttling->acpi_processor_set_throttling(pr, | |
| t_state.target_state); | |
| } else { | |
| /* | |
| * When the T-state coordination is SW_ALL or HW_ALL, | |
| * it is necessary to set T-state for every affected | |
| * cpus. | |
| */ | |
| for_each_cpu_mask(i, online_throttling_cpus) { | |
| match_pr = processors[i]; | |
| /* | |
| * If the pointer is invalid, we will report the | |
| * error message and continue. | |
| */ | |
| if (!match_pr) { | |
| ACPI_DEBUG_PRINT((ACPI_DB_INFO, | |
| "Invalid Pointer for CPU %d\n", i)); | |
| continue; | |
| } | |
| /* | |
| * If the throttling control is unsupported on CPU i, | |
| * we will report the error message and continue. | |
| */ | |
| if (!match_pr->flags.throttling) { | |
| ACPI_DEBUG_PRINT((ACPI_DB_INFO, | |
| "Throttling Controll is unsupported " | |
| "on CPU %d\n", i)); | |
| continue; | |
| } | |
| t_state.cpu = i; | |
| set_cpus_allowed_ptr(current, &cpumask_of_cpu(i)); | |
| ret = match_pr->throttling. | |
| acpi_processor_set_throttling( | |
| match_pr, t_state.target_state); | |
| } | |
| } | |
| /* | |
| * After the set_throttling is called, the | |
| * throttling notifier is called for every | |
| * affected cpu to update the T-states. | |
| * The notifier event is THROTTLING_POSTCHANGE | |
| */ | |
| for_each_cpu_mask(i, online_throttling_cpus) { | |
| t_state.cpu = i; | |
| acpi_processor_throttling_notifier(THROTTLING_POSTCHANGE, | |
| &t_state); | |
| } | |
| /* restore the previous state */ | |
| set_cpus_allowed_ptr(current, &saved_mask); | |
| return ret; | |
| } | |
| int acpi_processor_get_throttling_info(struct acpi_processor *pr) | |
| { | |
| int result = 0; | |
| struct acpi_processor_throttling *pthrottling; | |
| ACPI_DEBUG_PRINT((ACPI_DB_INFO, | |
| "pblk_address[0x%08x] duty_offset[%d] duty_width[%d]\n", | |
| pr->throttling.address, | |
| pr->throttling.duty_offset, | |
| pr->throttling.duty_width)); | |
| if (!pr) | |
| return -EINVAL; | |
| /* | |
| * Evaluate _PTC, _TSS and _TPC | |
| * They must all be present or none of them can be used. | |
| */ | |
| if (acpi_processor_get_throttling_control(pr) || | |
| acpi_processor_get_throttling_states(pr) || | |
| acpi_processor_get_platform_limit(pr)) | |
| { | |
| pr->throttling.acpi_processor_get_throttling = | |
| &acpi_processor_get_throttling_fadt; | |
| pr->throttling.acpi_processor_set_throttling = | |
| &acpi_processor_set_throttling_fadt; | |
| if (acpi_processor_get_fadt_info(pr)) | |
| return 0; | |
| } else { | |
| pr->throttling.acpi_processor_get_throttling = | |
| &acpi_processor_get_throttling_ptc; | |
| pr->throttling.acpi_processor_set_throttling = | |
| &acpi_processor_set_throttling_ptc; | |
| } | |
| /* | |
| * If TSD package for one CPU can't be parsed successfully, it means | |
| * that this CPU will have no coordination with other CPUs. | |
| */ | |
| if (acpi_processor_get_tsd(pr)) { | |
| pthrottling = &pr->throttling; | |
| pthrottling->tsd_valid_flag = 0; | |
| cpu_set(pr->id, pthrottling->shared_cpu_map); | |
| pthrottling->shared_type = DOMAIN_COORD_TYPE_SW_ALL; | |
| } | |
| /* | |
| * PIIX4 Errata: We don't support throttling on the original PIIX4. | |
| * This shouldn't be an issue as few (if any) mobile systems ever | |
| * used this part. | |
| */ | |
| if (errata.piix4.throttle) { | |
| ACPI_DEBUG_PRINT((ACPI_DB_INFO, | |
| "Throttling not supported on PIIX4 A- or B-step\n")); | |
| return 0; | |
| } | |
| ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found %d throttling states\n", | |
| pr->throttling.state_count)); | |
| pr->flags.throttling = 1; | |
| /* | |
| * Disable throttling (if enabled). We'll let subsequent policy (e.g. | |
| * thermal) decide to lower performance if it so chooses, but for now | |
| * we'll crank up the speed. | |
| */ | |
| result = acpi_processor_get_throttling(pr); | |
| if (result) | |
| goto end; | |
| if (pr->throttling.state) { | |
| ACPI_DEBUG_PRINT((ACPI_DB_INFO, | |
| "Disabling throttling (was T%d)\n", | |
| pr->throttling.state)); | |
| result = acpi_processor_set_throttling(pr, 0); | |
| if (result) | |
| goto end; | |
| } | |
| end: | |
| if (result) | |
| pr->flags.throttling = 0; | |
| return result; | |
| } | |
| /* proc interface */ | |
| static int acpi_processor_throttling_seq_show(struct seq_file *seq, | |
| void *offset) | |
| { | |
| struct acpi_processor *pr = seq->private; | |
| int i = 0; | |
| int result = 0; | |
| if (!pr) | |
| goto end; | |
| if (!(pr->throttling.state_count > 0)) { | |
| seq_puts(seq, "<not supported>\n"); | |
| goto end; | |
| } | |
| result = acpi_processor_get_throttling(pr); | |
| if (result) { | |
| seq_puts(seq, | |
| "Could not determine current throttling state.\n"); | |
| goto end; | |
| } | |
| seq_printf(seq, "state count: %d\n" | |
| "active state: T%d\n" | |
| "state available: T%d to T%d\n", | |
| pr->throttling.state_count, pr->throttling.state, | |
| pr->throttling_platform_limit, | |
| pr->throttling.state_count - 1); | |
| seq_puts(seq, "states:\n"); | |
| if (pr->throttling.acpi_processor_get_throttling == | |
| acpi_processor_get_throttling_fadt) { | |
| for (i = 0; i < pr->throttling.state_count; i++) | |
| seq_printf(seq, " %cT%d: %02d%%\n", | |
| (i == pr->throttling.state ? '*' : ' '), i, | |
| (pr->throttling.states[i].performance ? pr-> | |
| throttling.states[i].performance / 10 : 0)); | |
| } else { | |
| for (i = 0; i < pr->throttling.state_count; i++) | |
| seq_printf(seq, " %cT%d: %02d%%\n", | |
| (i == pr->throttling.state ? '*' : ' '), i, | |
| (int)pr->throttling.states_tss[i]. | |
| freqpercentage); | |
| } | |
| end: | |
| return 0; | |
| } | |
| static int acpi_processor_throttling_open_fs(struct inode *inode, | |
| struct file *file) | |
| { | |
| return single_open(file, acpi_processor_throttling_seq_show, | |
| PDE(inode)->data); | |
| } | |
| static ssize_t acpi_processor_write_throttling(struct file *file, | |
| const char __user * buffer, | |
| size_t count, loff_t * data) | |
| { | |
| int result = 0; | |
| struct seq_file *m = file->private_data; | |
| struct acpi_processor *pr = m->private; | |
| char state_string[12] = { '\0' }; | |
| if (!pr || (count > sizeof(state_string) - 1)) | |
| return -EINVAL; | |
| if (copy_from_user(state_string, buffer, count)) | |
| return -EFAULT; | |
| state_string[count] = '\0'; | |
| result = acpi_processor_set_throttling(pr, | |
| simple_strtoul(state_string, | |
| NULL, 0)); | |
| if (result) | |
| return result; | |
| return count; | |
| } | |
| struct file_operations acpi_processor_throttling_fops = { | |
| .owner = THIS_MODULE, | |
| .open = acpi_processor_throttling_open_fs, | |
| .read = seq_read, | |
| .write = acpi_processor_write_throttling, | |
| .llseek = seq_lseek, | |
| .release = single_release, | |
| }; |