| /* | |
| * Anticipatory & deadline i/o scheduler. | |
| * | |
| * Copyright (C) 2002 Jens Axboe <axboe@kernel.dk> | |
| * Nick Piggin <nickpiggin@yahoo.com.au> | |
| * | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/fs.h> | |
| #include <linux/blkdev.h> | |
| #include <linux/elevator.h> | |
| #include <linux/bio.h> | |
| #include <linux/module.h> | |
| #include <linux/slab.h> | |
| #include <linux/init.h> | |
| #include <linux/compiler.h> | |
| #include <linux/rbtree.h> | |
| #include <linux/interrupt.h> | |
| #define REQ_SYNC 1 | |
| #define REQ_ASYNC 0 | |
| /* | |
| * See Documentation/block/as-iosched.txt | |
| */ | |
| /* | |
| * max time before a read is submitted. | |
| */ | |
| #define default_read_expire (HZ / 8) | |
| /* | |
| * ditto for writes, these limits are not hard, even | |
| * if the disk is capable of satisfying them. | |
| */ | |
| #define default_write_expire (HZ / 4) | |
| /* | |
| * read_batch_expire describes how long we will allow a stream of reads to | |
| * persist before looking to see whether it is time to switch over to writes. | |
| */ | |
| #define default_read_batch_expire (HZ / 2) | |
| /* | |
| * write_batch_expire describes how long we want a stream of writes to run for. | |
| * This is not a hard limit, but a target we set for the auto-tuning thingy. | |
| * See, the problem is: we can send a lot of writes to disk cache / TCQ in | |
| * a short amount of time... | |
| */ | |
| #define default_write_batch_expire (HZ / 8) | |
| /* | |
| * max time we may wait to anticipate a read (default around 6ms) | |
| */ | |
| #define default_antic_expire ((HZ / 150) ? HZ / 150 : 1) | |
| /* | |
| * Keep track of up to 20ms thinktimes. We can go as big as we like here, | |
| * however huge values tend to interfere and not decay fast enough. A program | |
| * might be in a non-io phase of operation. Waiting on user input for example, | |
| * or doing a lengthy computation. A small penalty can be justified there, and | |
| * will still catch out those processes that constantly have large thinktimes. | |
| */ | |
| #define MAX_THINKTIME (HZ/50UL) | |
| /* Bits in as_io_context.state */ | |
| enum as_io_states { | |
| AS_TASK_RUNNING=0, /* Process has not exited */ | |
| AS_TASK_IOSTARTED, /* Process has started some IO */ | |
| AS_TASK_IORUNNING, /* Process has completed some IO */ | |
| }; | |
| enum anticipation_status { | |
| ANTIC_OFF=0, /* Not anticipating (normal operation) */ | |
| ANTIC_WAIT_REQ, /* The last read has not yet completed */ | |
| ANTIC_WAIT_NEXT, /* Currently anticipating a request vs | |
| last read (which has completed) */ | |
| ANTIC_FINISHED, /* Anticipating but have found a candidate | |
| * or timed out */ | |
| }; | |
| struct as_data { | |
| /* | |
| * run time data | |
| */ | |
| struct request_queue *q; /* the "owner" queue */ | |
| /* | |
| * requests (as_rq s) are present on both sort_list and fifo_list | |
| */ | |
| struct rb_root sort_list[2]; | |
| struct list_head fifo_list[2]; | |
| struct request *next_rq[2]; /* next in sort order */ | |
| sector_t last_sector[2]; /* last REQ_SYNC & REQ_ASYNC sectors */ | |
| unsigned long exit_prob; /* probability a task will exit while | |
| being waited on */ | |
| unsigned long exit_no_coop; /* probablility an exited task will | |
| not be part of a later cooperating | |
| request */ | |
| unsigned long new_ttime_total; /* mean thinktime on new proc */ | |
| unsigned long new_ttime_mean; | |
| u64 new_seek_total; /* mean seek on new proc */ | |
| sector_t new_seek_mean; | |
| unsigned long current_batch_expires; | |
| unsigned long last_check_fifo[2]; | |
| int changed_batch; /* 1: waiting for old batch to end */ | |
| int new_batch; /* 1: waiting on first read complete */ | |
| int batch_data_dir; /* current batch REQ_SYNC / REQ_ASYNC */ | |
| int write_batch_count; /* max # of reqs in a write batch */ | |
| int current_write_count; /* how many requests left this batch */ | |
| int write_batch_idled; /* has the write batch gone idle? */ | |
| enum anticipation_status antic_status; | |
| unsigned long antic_start; /* jiffies: when it started */ | |
| struct timer_list antic_timer; /* anticipatory scheduling timer */ | |
| struct work_struct antic_work; /* Deferred unplugging */ | |
| struct io_context *io_context; /* Identify the expected process */ | |
| int ioc_finished; /* IO associated with io_context is finished */ | |
| int nr_dispatched; | |
| /* | |
| * settings that change how the i/o scheduler behaves | |
| */ | |
| unsigned long fifo_expire[2]; | |
| unsigned long batch_expire[2]; | |
| unsigned long antic_expire; | |
| }; | |
| /* | |
| * per-request data. | |
| */ | |
| enum arq_state { | |
| AS_RQ_NEW=0, /* New - not referenced and not on any lists */ | |
| AS_RQ_QUEUED, /* In the request queue. It belongs to the | |
| scheduler */ | |
| AS_RQ_DISPATCHED, /* On the dispatch list. It belongs to the | |
| driver now */ | |
| AS_RQ_PRESCHED, /* Debug poisoning for requests being used */ | |
| AS_RQ_REMOVED, | |
| AS_RQ_MERGED, | |
| AS_RQ_POSTSCHED, /* when they shouldn't be */ | |
| }; | |
| #define RQ_IOC(rq) ((struct io_context *) (rq)->elevator_private) | |
| #define RQ_STATE(rq) ((enum arq_state)(rq)->elevator_private2) | |
| #define RQ_SET_STATE(rq, state) ((rq)->elevator_private2 = (void *) state) | |
| static DEFINE_PER_CPU(unsigned long, ioc_count); | |
| static struct completion *ioc_gone; | |
| static void as_move_to_dispatch(struct as_data *ad, struct request *rq); | |
| static void as_antic_stop(struct as_data *ad); | |
| /* | |
| * IO Context helper functions | |
| */ | |
| /* Called to deallocate the as_io_context */ | |
| static void free_as_io_context(struct as_io_context *aic) | |
| { | |
| kfree(aic); | |
| elv_ioc_count_dec(ioc_count); | |
| if (ioc_gone && !elv_ioc_count_read(ioc_count)) | |
| complete(ioc_gone); | |
| } | |
| static void as_trim(struct io_context *ioc) | |
| { | |
| spin_lock_irq(&ioc->lock); | |
| if (ioc->aic) | |
| free_as_io_context(ioc->aic); | |
| ioc->aic = NULL; | |
| spin_unlock_irq(&ioc->lock); | |
| } | |
| /* Called when the task exits */ | |
| static void exit_as_io_context(struct as_io_context *aic) | |
| { | |
| WARN_ON(!test_bit(AS_TASK_RUNNING, &aic->state)); | |
| clear_bit(AS_TASK_RUNNING, &aic->state); | |
| } | |
| static struct as_io_context *alloc_as_io_context(void) | |
| { | |
| struct as_io_context *ret; | |
| ret = kmalloc(sizeof(*ret), GFP_ATOMIC); | |
| if (ret) { | |
| ret->dtor = free_as_io_context; | |
| ret->exit = exit_as_io_context; | |
| ret->state = 1 << AS_TASK_RUNNING; | |
| atomic_set(&ret->nr_queued, 0); | |
| atomic_set(&ret->nr_dispatched, 0); | |
| spin_lock_init(&ret->lock); | |
| ret->ttime_total = 0; | |
| ret->ttime_samples = 0; | |
| ret->ttime_mean = 0; | |
| ret->seek_total = 0; | |
| ret->seek_samples = 0; | |
| ret->seek_mean = 0; | |
| elv_ioc_count_inc(ioc_count); | |
| } | |
| return ret; | |
| } | |
| /* | |
| * If the current task has no AS IO context then create one and initialise it. | |
| * Then take a ref on the task's io context and return it. | |
| */ | |
| static struct io_context *as_get_io_context(int node) | |
| { | |
| struct io_context *ioc = get_io_context(GFP_ATOMIC, node); | |
| if (ioc && !ioc->aic) { | |
| ioc->aic = alloc_as_io_context(); | |
| if (!ioc->aic) { | |
| put_io_context(ioc); | |
| ioc = NULL; | |
| } | |
| } | |
| return ioc; | |
| } | |
| static void as_put_io_context(struct request *rq) | |
| { | |
| struct as_io_context *aic; | |
| if (unlikely(!RQ_IOC(rq))) | |
| return; | |
| aic = RQ_IOC(rq)->aic; | |
| if (rq_is_sync(rq) && aic) { | |
| unsigned long flags; | |
| spin_lock_irqsave(&aic->lock, flags); | |
| set_bit(AS_TASK_IORUNNING, &aic->state); | |
| aic->last_end_request = jiffies; | |
| spin_unlock_irqrestore(&aic->lock, flags); | |
| } | |
| put_io_context(RQ_IOC(rq)); | |
| } | |
| /* | |
| * rb tree support functions | |
| */ | |
| #define RQ_RB_ROOT(ad, rq) (&(ad)->sort_list[rq_is_sync((rq))]) | |
| static void as_add_rq_rb(struct as_data *ad, struct request *rq) | |
| { | |
| struct request *alias; | |
| while ((unlikely(alias = elv_rb_add(RQ_RB_ROOT(ad, rq), rq)))) { | |
| as_move_to_dispatch(ad, alias); | |
| as_antic_stop(ad); | |
| } | |
| } | |
| static inline void as_del_rq_rb(struct as_data *ad, struct request *rq) | |
| { | |
| elv_rb_del(RQ_RB_ROOT(ad, rq), rq); | |
| } | |
| /* | |
| * IO Scheduler proper | |
| */ | |
| #define MAXBACK (1024 * 1024) /* | |
| * Maximum distance the disk will go backward | |
| * for a request. | |
| */ | |
| #define BACK_PENALTY 2 | |
| /* | |
| * as_choose_req selects the preferred one of two requests of the same data_dir | |
| * ignoring time - eg. timeouts, which is the job of as_dispatch_request | |
| */ | |
| static struct request * | |
| as_choose_req(struct as_data *ad, struct request *rq1, struct request *rq2) | |
| { | |
| int data_dir; | |
| sector_t last, s1, s2, d1, d2; | |
| int r1_wrap=0, r2_wrap=0; /* requests are behind the disk head */ | |
| const sector_t maxback = MAXBACK; | |
| if (rq1 == NULL || rq1 == rq2) | |
| return rq2; | |
| if (rq2 == NULL) | |
| return rq1; | |
| data_dir = rq_is_sync(rq1); | |
| last = ad->last_sector[data_dir]; | |
| s1 = rq1->sector; | |
| s2 = rq2->sector; | |
| BUG_ON(data_dir != rq_is_sync(rq2)); | |
| /* | |
| * Strict one way elevator _except_ in the case where we allow | |
| * short backward seeks which are biased as twice the cost of a | |
| * similar forward seek. | |
| */ | |
| if (s1 >= last) | |
| d1 = s1 - last; | |
| else if (s1+maxback >= last) | |
| d1 = (last - s1)*BACK_PENALTY; | |
| else { | |
| r1_wrap = 1; | |
| d1 = 0; /* shut up, gcc */ | |
| } | |
| if (s2 >= last) | |
| d2 = s2 - last; | |
| else if (s2+maxback >= last) | |
| d2 = (last - s2)*BACK_PENALTY; | |
| else { | |
| r2_wrap = 1; | |
| d2 = 0; | |
| } | |
| /* Found required data */ | |
| if (!r1_wrap && r2_wrap) | |
| return rq1; | |
| else if (!r2_wrap && r1_wrap) | |
| return rq2; | |
| else if (r1_wrap && r2_wrap) { | |
| /* both behind the head */ | |
| if (s1 <= s2) | |
| return rq1; | |
| else | |
| return rq2; | |
| } | |
| /* Both requests in front of the head */ | |
| if (d1 < d2) | |
| return rq1; | |
| else if (d2 < d1) | |
| return rq2; | |
| else { | |
| if (s1 >= s2) | |
| return rq1; | |
| else | |
| return rq2; | |
| } | |
| } | |
| /* | |
| * as_find_next_rq finds the next request after @prev in elevator order. | |
| * this with as_choose_req form the basis for how the scheduler chooses | |
| * what request to process next. Anticipation works on top of this. | |
| */ | |
| static struct request * | |
| as_find_next_rq(struct as_data *ad, struct request *last) | |
| { | |
| struct rb_node *rbnext = rb_next(&last->rb_node); | |
| struct rb_node *rbprev = rb_prev(&last->rb_node); | |
| struct request *next = NULL, *prev = NULL; | |
| BUG_ON(RB_EMPTY_NODE(&last->rb_node)); | |
| if (rbprev) | |
| prev = rb_entry_rq(rbprev); | |
| if (rbnext) | |
| next = rb_entry_rq(rbnext); | |
| else { | |
| const int data_dir = rq_is_sync(last); | |
| rbnext = rb_first(&ad->sort_list[data_dir]); | |
| if (rbnext && rbnext != &last->rb_node) | |
| next = rb_entry_rq(rbnext); | |
| } | |
| return as_choose_req(ad, next, prev); | |
| } | |
| /* | |
| * anticipatory scheduling functions follow | |
| */ | |
| /* | |
| * as_antic_expired tells us when we have anticipated too long. | |
| * The funny "absolute difference" math on the elapsed time is to handle | |
| * jiffy wraps, and disks which have been idle for 0x80000000 jiffies. | |
| */ | |
| static int as_antic_expired(struct as_data *ad) | |
| { | |
| long delta_jif; | |
| delta_jif = jiffies - ad->antic_start; | |
| if (unlikely(delta_jif < 0)) | |
| delta_jif = -delta_jif; | |
| if (delta_jif < ad->antic_expire) | |
| return 0; | |
| return 1; | |
| } | |
| /* | |
| * as_antic_waitnext starts anticipating that a nice request will soon be | |
| * submitted. See also as_antic_waitreq | |
| */ | |
| static void as_antic_waitnext(struct as_data *ad) | |
| { | |
| unsigned long timeout; | |
| BUG_ON(ad->antic_status != ANTIC_OFF | |
| && ad->antic_status != ANTIC_WAIT_REQ); | |
| timeout = ad->antic_start + ad->antic_expire; | |
| mod_timer(&ad->antic_timer, timeout); | |
| ad->antic_status = ANTIC_WAIT_NEXT; | |
| } | |
| /* | |
| * as_antic_waitreq starts anticipating. We don't start timing the anticipation | |
| * until the request that we're anticipating on has finished. This means we | |
| * are timing from when the candidate process wakes up hopefully. | |
| */ | |
| static void as_antic_waitreq(struct as_data *ad) | |
| { | |
| BUG_ON(ad->antic_status == ANTIC_FINISHED); | |
| if (ad->antic_status == ANTIC_OFF) { | |
| if (!ad->io_context || ad->ioc_finished) | |
| as_antic_waitnext(ad); | |
| else | |
| ad->antic_status = ANTIC_WAIT_REQ; | |
| } | |
| } | |
| /* | |
| * This is called directly by the functions in this file to stop anticipation. | |
| * We kill the timer and schedule a call to the request_fn asap. | |
| */ | |
| static void as_antic_stop(struct as_data *ad) | |
| { | |
| int status = ad->antic_status; | |
| if (status == ANTIC_WAIT_REQ || status == ANTIC_WAIT_NEXT) { | |
| if (status == ANTIC_WAIT_NEXT) | |
| del_timer(&ad->antic_timer); | |
| ad->antic_status = ANTIC_FINISHED; | |
| /* see as_work_handler */ | |
| kblockd_schedule_work(&ad->antic_work); | |
| } | |
| } | |
| /* | |
| * as_antic_timeout is the timer function set by as_antic_waitnext. | |
| */ | |
| static void as_antic_timeout(unsigned long data) | |
| { | |
| struct request_queue *q = (struct request_queue *)data; | |
| struct as_data *ad = q->elevator->elevator_data; | |
| unsigned long flags; | |
| spin_lock_irqsave(q->queue_lock, flags); | |
| if (ad->antic_status == ANTIC_WAIT_REQ | |
| || ad->antic_status == ANTIC_WAIT_NEXT) { | |
| struct as_io_context *aic; | |
| spin_lock(&ad->io_context->lock); | |
| aic = ad->io_context->aic; | |
| ad->antic_status = ANTIC_FINISHED; | |
| kblockd_schedule_work(&ad->antic_work); | |
| if (aic->ttime_samples == 0) { | |
| /* process anticipated on has exited or timed out*/ | |
| ad->exit_prob = (7*ad->exit_prob + 256)/8; | |
| } | |
| if (!test_bit(AS_TASK_RUNNING, &aic->state)) { | |
| /* process not "saved" by a cooperating request */ | |
| ad->exit_no_coop = (7*ad->exit_no_coop + 256)/8; | |
| } | |
| spin_unlock(&ad->io_context->lock); | |
| } | |
| spin_unlock_irqrestore(q->queue_lock, flags); | |
| } | |
| static void as_update_thinktime(struct as_data *ad, struct as_io_context *aic, | |
| unsigned long ttime) | |
| { | |
| /* fixed point: 1.0 == 1<<8 */ | |
| if (aic->ttime_samples == 0) { | |
| ad->new_ttime_total = (7*ad->new_ttime_total + 256*ttime) / 8; | |
| ad->new_ttime_mean = ad->new_ttime_total / 256; | |
| ad->exit_prob = (7*ad->exit_prob)/8; | |
| } | |
| aic->ttime_samples = (7*aic->ttime_samples + 256) / 8; | |
| aic->ttime_total = (7*aic->ttime_total + 256*ttime) / 8; | |
| aic->ttime_mean = (aic->ttime_total + 128) / aic->ttime_samples; | |
| } | |
| static void as_update_seekdist(struct as_data *ad, struct as_io_context *aic, | |
| sector_t sdist) | |
| { | |
| u64 total; | |
| if (aic->seek_samples == 0) { | |
| ad->new_seek_total = (7*ad->new_seek_total + 256*(u64)sdist)/8; | |
| ad->new_seek_mean = ad->new_seek_total / 256; | |
| } | |
| /* | |
| * Don't allow the seek distance to get too large from the | |
| * odd fragment, pagein, etc | |
| */ | |
| if (aic->seek_samples <= 60) /* second&third seek */ | |
| sdist = min(sdist, (aic->seek_mean * 4) + 2*1024*1024); | |
| else | |
| sdist = min(sdist, (aic->seek_mean * 4) + 2*1024*64); | |
| aic->seek_samples = (7*aic->seek_samples + 256) / 8; | |
| aic->seek_total = (7*aic->seek_total + (u64)256*sdist) / 8; | |
| total = aic->seek_total + (aic->seek_samples/2); | |
| do_div(total, aic->seek_samples); | |
| aic->seek_mean = (sector_t)total; | |
| } | |
| /* | |
| * as_update_iohist keeps a decaying histogram of IO thinktimes, and | |
| * updates @aic->ttime_mean based on that. It is called when a new | |
| * request is queued. | |
| */ | |
| static void as_update_iohist(struct as_data *ad, struct as_io_context *aic, | |
| struct request *rq) | |
| { | |
| int data_dir = rq_is_sync(rq); | |
| unsigned long thinktime = 0; | |
| sector_t seek_dist; | |
| if (aic == NULL) | |
| return; | |
| if (data_dir == REQ_SYNC) { | |
| unsigned long in_flight = atomic_read(&aic->nr_queued) | |
| + atomic_read(&aic->nr_dispatched); | |
| spin_lock(&aic->lock); | |
| if (test_bit(AS_TASK_IORUNNING, &aic->state) || | |
| test_bit(AS_TASK_IOSTARTED, &aic->state)) { | |
| /* Calculate read -> read thinktime */ | |
| if (test_bit(AS_TASK_IORUNNING, &aic->state) | |
| && in_flight == 0) { | |
| thinktime = jiffies - aic->last_end_request; | |
| thinktime = min(thinktime, MAX_THINKTIME-1); | |
| } | |
| as_update_thinktime(ad, aic, thinktime); | |
| /* Calculate read -> read seek distance */ | |
| if (aic->last_request_pos < rq->sector) | |
| seek_dist = rq->sector - aic->last_request_pos; | |
| else | |
| seek_dist = aic->last_request_pos - rq->sector; | |
| as_update_seekdist(ad, aic, seek_dist); | |
| } | |
| aic->last_request_pos = rq->sector + rq->nr_sectors; | |
| set_bit(AS_TASK_IOSTARTED, &aic->state); | |
| spin_unlock(&aic->lock); | |
| } | |
| } | |
| /* | |
| * as_close_req decides if one request is considered "close" to the | |
| * previous one issued. | |
| */ | |
| static int as_close_req(struct as_data *ad, struct as_io_context *aic, | |
| struct request *rq) | |
| { | |
| unsigned long delay; /* jiffies */ | |
| sector_t last = ad->last_sector[ad->batch_data_dir]; | |
| sector_t next = rq->sector; | |
| sector_t delta; /* acceptable close offset (in sectors) */ | |
| sector_t s; | |
| if (ad->antic_status == ANTIC_OFF || !ad->ioc_finished) | |
| delay = 0; | |
| else | |
| delay = jiffies - ad->antic_start; | |
| if (delay == 0) | |
| delta = 8192; | |
| else if (delay <= (20 * HZ / 1000) && delay <= ad->antic_expire) | |
| delta = 8192 << delay; | |
| else | |
| return 1; | |
| if ((last <= next + (delta>>1)) && (next <= last + delta)) | |
| return 1; | |
| if (last < next) | |
| s = next - last; | |
| else | |
| s = last - next; | |
| if (aic->seek_samples == 0) { | |
| /* | |
| * Process has just started IO. Use past statistics to | |
| * gauge success possibility | |
| */ | |
| if (ad->new_seek_mean > s) { | |
| /* this request is better than what we're expecting */ | |
| return 1; | |
| } | |
| } else { | |
| if (aic->seek_mean > s) { | |
| /* this request is better than what we're expecting */ | |
| return 1; | |
| } | |
| } | |
| return 0; | |
| } | |
| /* | |
| * as_can_break_anticipation returns true if we have been anticipating this | |
| * request. | |
| * | |
| * It also returns true if the process against which we are anticipating | |
| * submits a write - that's presumably an fsync, O_SYNC write, etc. We want to | |
| * dispatch it ASAP, because we know that application will not be submitting | |
| * any new reads. | |
| * | |
| * If the task which has submitted the request has exited, break anticipation. | |
| * | |
| * If this task has queued some other IO, do not enter enticipation. | |
| */ | |
| static int as_can_break_anticipation(struct as_data *ad, struct request *rq) | |
| { | |
| struct io_context *ioc; | |
| struct as_io_context *aic; | |
| ioc = ad->io_context; | |
| BUG_ON(!ioc); | |
| spin_lock(&ioc->lock); | |
| if (rq && ioc == RQ_IOC(rq)) { | |
| /* request from same process */ | |
| spin_unlock(&ioc->lock); | |
| return 1; | |
| } | |
| if (ad->ioc_finished && as_antic_expired(ad)) { | |
| /* | |
| * In this situation status should really be FINISHED, | |
| * however the timer hasn't had the chance to run yet. | |
| */ | |
| spin_unlock(&ioc->lock); | |
| return 1; | |
| } | |
| aic = ioc->aic; | |
| if (!aic) { | |
| spin_unlock(&ioc->lock); | |
| return 0; | |
| } | |
| if (atomic_read(&aic->nr_queued) > 0) { | |
| /* process has more requests queued */ | |
| spin_unlock(&ioc->lock); | |
| return 1; | |
| } | |
| if (atomic_read(&aic->nr_dispatched) > 0) { | |
| /* process has more requests dispatched */ | |
| spin_unlock(&ioc->lock); | |
| return 1; | |
| } | |
| if (rq && rq_is_sync(rq) && as_close_req(ad, aic, rq)) { | |
| /* | |
| * Found a close request that is not one of ours. | |
| * | |
| * This makes close requests from another process update | |
| * our IO history. Is generally useful when there are | |
| * two or more cooperating processes working in the same | |
| * area. | |
| */ | |
| if (!test_bit(AS_TASK_RUNNING, &aic->state)) { | |
| if (aic->ttime_samples == 0) | |
| ad->exit_prob = (7*ad->exit_prob + 256)/8; | |
| ad->exit_no_coop = (7*ad->exit_no_coop)/8; | |
| } | |
| as_update_iohist(ad, aic, rq); | |
| spin_unlock(&ioc->lock); | |
| return 1; | |
| } | |
| if (!test_bit(AS_TASK_RUNNING, &aic->state)) { | |
| /* process anticipated on has exited */ | |
| if (aic->ttime_samples == 0) | |
| ad->exit_prob = (7*ad->exit_prob + 256)/8; | |
| if (ad->exit_no_coop > 128) { | |
| spin_unlock(&ioc->lock); | |
| return 1; | |
| } | |
| } | |
| if (aic->ttime_samples == 0) { | |
| if (ad->new_ttime_mean > ad->antic_expire) { | |
| spin_unlock(&ioc->lock); | |
| return 1; | |
| } | |
| if (ad->exit_prob * ad->exit_no_coop > 128*256) { | |
| spin_unlock(&ioc->lock); | |
| return 1; | |
| } | |
| } else if (aic->ttime_mean > ad->antic_expire) { | |
| /* the process thinks too much between requests */ | |
| spin_unlock(&ioc->lock); | |
| return 1; | |
| } | |
| spin_unlock(&ioc->lock); | |
| return 0; | |
| } | |
| /* | |
| * as_can_anticipate indicates whether we should either run rq | |
| * or keep anticipating a better request. | |
| */ | |
| static int as_can_anticipate(struct as_data *ad, struct request *rq) | |
| { | |
| if (!ad->io_context) | |
| /* | |
| * Last request submitted was a write | |
| */ | |
| return 0; | |
| if (ad->antic_status == ANTIC_FINISHED) | |
| /* | |
| * Don't restart if we have just finished. Run the next request | |
| */ | |
| return 0; | |
| if (as_can_break_anticipation(ad, rq)) | |
| /* | |
| * This request is a good candidate. Don't keep anticipating, | |
| * run it. | |
| */ | |
| return 0; | |
| /* | |
| * OK from here, we haven't finished, and don't have a decent request! | |
| * Status is either ANTIC_OFF so start waiting, | |
| * ANTIC_WAIT_REQ so continue waiting for request to finish | |
| * or ANTIC_WAIT_NEXT so continue waiting for an acceptable request. | |
| */ | |
| return 1; | |
| } | |
| /* | |
| * as_update_rq must be called whenever a request (rq) is added to | |
| * the sort_list. This function keeps caches up to date, and checks if the | |
| * request might be one we are "anticipating" | |
| */ | |
| static void as_update_rq(struct as_data *ad, struct request *rq) | |
| { | |
| const int data_dir = rq_is_sync(rq); | |
| /* keep the next_rq cache up to date */ | |
| ad->next_rq[data_dir] = as_choose_req(ad, rq, ad->next_rq[data_dir]); | |
| /* | |
| * have we been anticipating this request? | |
| * or does it come from the same process as the one we are anticipating | |
| * for? | |
| */ | |
| if (ad->antic_status == ANTIC_WAIT_REQ | |
| || ad->antic_status == ANTIC_WAIT_NEXT) { | |
| if (as_can_break_anticipation(ad, rq)) | |
| as_antic_stop(ad); | |
| } | |
| } | |
| /* | |
| * Gathers timings and resizes the write batch automatically | |
| */ | |
| static void update_write_batch(struct as_data *ad) | |
| { | |
| unsigned long batch = ad->batch_expire[REQ_ASYNC]; | |
| long write_time; | |
| write_time = (jiffies - ad->current_batch_expires) + batch; | |
| if (write_time < 0) | |
| write_time = 0; | |
| if (write_time > batch && !ad->write_batch_idled) { | |
| if (write_time > batch * 3) | |
| ad->write_batch_count /= 2; | |
| else | |
| ad->write_batch_count--; | |
| } else if (write_time < batch && ad->current_write_count == 0) { | |
| if (batch > write_time * 3) | |
| ad->write_batch_count *= 2; | |
| else | |
| ad->write_batch_count++; | |
| } | |
| if (ad->write_batch_count < 1) | |
| ad->write_batch_count = 1; | |
| } | |
| /* | |
| * as_completed_request is to be called when a request has completed and | |
| * returned something to the requesting process, be it an error or data. | |
| */ | |
| static void as_completed_request(struct request_queue *q, struct request *rq) | |
| { | |
| struct as_data *ad = q->elevator->elevator_data; | |
| WARN_ON(!list_empty(&rq->queuelist)); | |
| if (RQ_STATE(rq) != AS_RQ_REMOVED) { | |
| printk("rq->state %d\n", RQ_STATE(rq)); | |
| WARN_ON(1); | |
| goto out; | |
| } | |
| if (ad->changed_batch && ad->nr_dispatched == 1) { | |
| kblockd_schedule_work(&ad->antic_work); | |
| ad->changed_batch = 0; | |
| if (ad->batch_data_dir == REQ_SYNC) | |
| ad->new_batch = 1; | |
| } | |
| WARN_ON(ad->nr_dispatched == 0); | |
| ad->nr_dispatched--; | |
| /* | |
| * Start counting the batch from when a request of that direction is | |
| * actually serviced. This should help devices with big TCQ windows | |
| * and writeback caches | |
| */ | |
| if (ad->new_batch && ad->batch_data_dir == rq_is_sync(rq)) { | |
| update_write_batch(ad); | |
| ad->current_batch_expires = jiffies + | |
| ad->batch_expire[REQ_SYNC]; | |
| ad->new_batch = 0; | |
| } | |
| if (ad->io_context == RQ_IOC(rq) && ad->io_context) { | |
| ad->antic_start = jiffies; | |
| ad->ioc_finished = 1; | |
| if (ad->antic_status == ANTIC_WAIT_REQ) { | |
| /* | |
| * We were waiting on this request, now anticipate | |
| * the next one | |
| */ | |
| as_antic_waitnext(ad); | |
| } | |
| } | |
| as_put_io_context(rq); | |
| out: | |
| RQ_SET_STATE(rq, AS_RQ_POSTSCHED); | |
| } | |
| /* | |
| * as_remove_queued_request removes a request from the pre dispatch queue | |
| * without updating refcounts. It is expected the caller will drop the | |
| * reference unless it replaces the request at somepart of the elevator | |
| * (ie. the dispatch queue) | |
| */ | |
| static void as_remove_queued_request(struct request_queue *q, | |
| struct request *rq) | |
| { | |
| const int data_dir = rq_is_sync(rq); | |
| struct as_data *ad = q->elevator->elevator_data; | |
| struct io_context *ioc; | |
| WARN_ON(RQ_STATE(rq) != AS_RQ_QUEUED); | |
| ioc = RQ_IOC(rq); | |
| if (ioc && ioc->aic) { | |
| BUG_ON(!atomic_read(&ioc->aic->nr_queued)); | |
| atomic_dec(&ioc->aic->nr_queued); | |
| } | |
| /* | |
| * Update the "next_rq" cache if we are about to remove its | |
| * entry | |
| */ | |
| if (ad->next_rq[data_dir] == rq) | |
| ad->next_rq[data_dir] = as_find_next_rq(ad, rq); | |
| rq_fifo_clear(rq); | |
| as_del_rq_rb(ad, rq); | |
| } | |
| /* | |
| * as_fifo_expired returns 0 if there are no expired requests on the fifo, | |
| * 1 otherwise. It is ratelimited so that we only perform the check once per | |
| * `fifo_expire' interval. Otherwise a large number of expired requests | |
| * would create a hopeless seekstorm. | |
| * | |
| * See as_antic_expired comment. | |
| */ | |
| static int as_fifo_expired(struct as_data *ad, int adir) | |
| { | |
| struct request *rq; | |
| long delta_jif; | |
| delta_jif = jiffies - ad->last_check_fifo[adir]; | |
| if (unlikely(delta_jif < 0)) | |
| delta_jif = -delta_jif; | |
| if (delta_jif < ad->fifo_expire[adir]) | |
| return 0; | |
| ad->last_check_fifo[adir] = jiffies; | |
| if (list_empty(&ad->fifo_list[adir])) | |
| return 0; | |
| rq = rq_entry_fifo(ad->fifo_list[adir].next); | |
| return time_after(jiffies, rq_fifo_time(rq)); | |
| } | |
| /* | |
| * as_batch_expired returns true if the current batch has expired. A batch | |
| * is a set of reads or a set of writes. | |
| */ | |
| static inline int as_batch_expired(struct as_data *ad) | |
| { | |
| if (ad->changed_batch || ad->new_batch) | |
| return 0; | |
| if (ad->batch_data_dir == REQ_SYNC) | |
| /* TODO! add a check so a complete fifo gets written? */ | |
| return time_after(jiffies, ad->current_batch_expires); | |
| return time_after(jiffies, ad->current_batch_expires) | |
| || ad->current_write_count == 0; | |
| } | |
| /* | |
| * move an entry to dispatch queue | |
| */ | |
| static void as_move_to_dispatch(struct as_data *ad, struct request *rq) | |
| { | |
| const int data_dir = rq_is_sync(rq); | |
| BUG_ON(RB_EMPTY_NODE(&rq->rb_node)); | |
| as_antic_stop(ad); | |
| ad->antic_status = ANTIC_OFF; | |
| /* | |
| * This has to be set in order to be correctly updated by | |
| * as_find_next_rq | |
| */ | |
| ad->last_sector[data_dir] = rq->sector + rq->nr_sectors; | |
| if (data_dir == REQ_SYNC) { | |
| struct io_context *ioc = RQ_IOC(rq); | |
| /* In case we have to anticipate after this */ | |
| copy_io_context(&ad->io_context, &ioc); | |
| } else { | |
| if (ad->io_context) { | |
| put_io_context(ad->io_context); | |
| ad->io_context = NULL; | |
| } | |
| if (ad->current_write_count != 0) | |
| ad->current_write_count--; | |
| } | |
| ad->ioc_finished = 0; | |
| ad->next_rq[data_dir] = as_find_next_rq(ad, rq); | |
| /* | |
| * take it off the sort and fifo list, add to dispatch queue | |
| */ | |
| as_remove_queued_request(ad->q, rq); | |
| WARN_ON(RQ_STATE(rq) != AS_RQ_QUEUED); | |
| elv_dispatch_sort(ad->q, rq); | |
| RQ_SET_STATE(rq, AS_RQ_DISPATCHED); | |
| if (RQ_IOC(rq) && RQ_IOC(rq)->aic) | |
| atomic_inc(&RQ_IOC(rq)->aic->nr_dispatched); | |
| ad->nr_dispatched++; | |
| } | |
| /* | |
| * as_dispatch_request selects the best request according to | |
| * read/write expire, batch expire, etc, and moves it to the dispatch | |
| * queue. Returns 1 if a request was found, 0 otherwise. | |
| */ | |
| static int as_dispatch_request(struct request_queue *q, int force) | |
| { | |
| struct as_data *ad = q->elevator->elevator_data; | |
| const int reads = !list_empty(&ad->fifo_list[REQ_SYNC]); | |
| const int writes = !list_empty(&ad->fifo_list[REQ_ASYNC]); | |
| struct request *rq; | |
| if (unlikely(force)) { | |
| /* | |
| * Forced dispatch, accounting is useless. Reset | |
| * accounting states and dump fifo_lists. Note that | |
| * batch_data_dir is reset to REQ_SYNC to avoid | |
| * screwing write batch accounting as write batch | |
| * accounting occurs on W->R transition. | |
| */ | |
| int dispatched = 0; | |
| ad->batch_data_dir = REQ_SYNC; | |
| ad->changed_batch = 0; | |
| ad->new_batch = 0; | |
| while (ad->next_rq[REQ_SYNC]) { | |
| as_move_to_dispatch(ad, ad->next_rq[REQ_SYNC]); | |
| dispatched++; | |
| } | |
| ad->last_check_fifo[REQ_SYNC] = jiffies; | |
| while (ad->next_rq[REQ_ASYNC]) { | |
| as_move_to_dispatch(ad, ad->next_rq[REQ_ASYNC]); | |
| dispatched++; | |
| } | |
| ad->last_check_fifo[REQ_ASYNC] = jiffies; | |
| return dispatched; | |
| } | |
| /* Signal that the write batch was uncontended, so we can't time it */ | |
| if (ad->batch_data_dir == REQ_ASYNC && !reads) { | |
| if (ad->current_write_count == 0 || !writes) | |
| ad->write_batch_idled = 1; | |
| } | |
| if (!(reads || writes) | |
| || ad->antic_status == ANTIC_WAIT_REQ | |
| || ad->antic_status == ANTIC_WAIT_NEXT | |
| || ad->changed_batch) | |
| return 0; | |
| if (!(reads && writes && as_batch_expired(ad))) { | |
| /* | |
| * batch is still running or no reads or no writes | |
| */ | |
| rq = ad->next_rq[ad->batch_data_dir]; | |
| if (ad->batch_data_dir == REQ_SYNC && ad->antic_expire) { | |
| if (as_fifo_expired(ad, REQ_SYNC)) | |
| goto fifo_expired; | |
| if (as_can_anticipate(ad, rq)) { | |
| as_antic_waitreq(ad); | |
| return 0; | |
| } | |
| } | |
| if (rq) { | |
| /* we have a "next request" */ | |
| if (reads && !writes) | |
| ad->current_batch_expires = | |
| jiffies + ad->batch_expire[REQ_SYNC]; | |
| goto dispatch_request; | |
| } | |
| } | |
| /* | |
| * at this point we are not running a batch. select the appropriate | |
| * data direction (read / write) | |
| */ | |
| if (reads) { | |
| BUG_ON(RB_EMPTY_ROOT(&ad->sort_list[REQ_SYNC])); | |
| if (writes && ad->batch_data_dir == REQ_SYNC) | |
| /* | |
| * Last batch was a read, switch to writes | |
| */ | |
| goto dispatch_writes; | |
| if (ad->batch_data_dir == REQ_ASYNC) { | |
| WARN_ON(ad->new_batch); | |
| ad->changed_batch = 1; | |
| } | |
| ad->batch_data_dir = REQ_SYNC; | |
| rq = rq_entry_fifo(ad->fifo_list[REQ_SYNC].next); | |
| ad->last_check_fifo[ad->batch_data_dir] = jiffies; | |
| goto dispatch_request; | |
| } | |
| /* | |
| * the last batch was a read | |
| */ | |
| if (writes) { | |
| dispatch_writes: | |
| BUG_ON(RB_EMPTY_ROOT(&ad->sort_list[REQ_ASYNC])); | |
| if (ad->batch_data_dir == REQ_SYNC) { | |
| ad->changed_batch = 1; | |
| /* | |
| * new_batch might be 1 when the queue runs out of | |
| * reads. A subsequent submission of a write might | |
| * cause a change of batch before the read is finished. | |
| */ | |
| ad->new_batch = 0; | |
| } | |
| ad->batch_data_dir = REQ_ASYNC; | |
| ad->current_write_count = ad->write_batch_count; | |
| ad->write_batch_idled = 0; | |
| rq = rq_entry_fifo(ad->fifo_list[REQ_ASYNC].next); | |
| ad->last_check_fifo[REQ_ASYNC] = jiffies; | |
| goto dispatch_request; | |
| } | |
| BUG(); | |
| return 0; | |
| dispatch_request: | |
| /* | |
| * If a request has expired, service it. | |
| */ | |
| if (as_fifo_expired(ad, ad->batch_data_dir)) { | |
| fifo_expired: | |
| rq = rq_entry_fifo(ad->fifo_list[ad->batch_data_dir].next); | |
| } | |
| if (ad->changed_batch) { | |
| WARN_ON(ad->new_batch); | |
| if (ad->nr_dispatched) | |
| return 0; | |
| if (ad->batch_data_dir == REQ_ASYNC) | |
| ad->current_batch_expires = jiffies + | |
| ad->batch_expire[REQ_ASYNC]; | |
| else | |
| ad->new_batch = 1; | |
| ad->changed_batch = 0; | |
| } | |
| /* | |
| * rq is the selected appropriate request. | |
| */ | |
| as_move_to_dispatch(ad, rq); | |
| return 1; | |
| } | |
| /* | |
| * add rq to rbtree and fifo | |
| */ | |
| static void as_add_request(struct request_queue *q, struct request *rq) | |
| { | |
| struct as_data *ad = q->elevator->elevator_data; | |
| int data_dir; | |
| RQ_SET_STATE(rq, AS_RQ_NEW); | |
| data_dir = rq_is_sync(rq); | |
| rq->elevator_private = as_get_io_context(q->node); | |
| if (RQ_IOC(rq)) { | |
| as_update_iohist(ad, RQ_IOC(rq)->aic, rq); | |
| atomic_inc(&RQ_IOC(rq)->aic->nr_queued); | |
| } | |
| as_add_rq_rb(ad, rq); | |
| /* | |
| * set expire time and add to fifo list | |
| */ | |
| rq_set_fifo_time(rq, jiffies + ad->fifo_expire[data_dir]); | |
| list_add_tail(&rq->queuelist, &ad->fifo_list[data_dir]); | |
| as_update_rq(ad, rq); /* keep state machine up to date */ | |
| RQ_SET_STATE(rq, AS_RQ_QUEUED); | |
| } | |
| static void as_activate_request(struct request_queue *q, struct request *rq) | |
| { | |
| WARN_ON(RQ_STATE(rq) != AS_RQ_DISPATCHED); | |
| RQ_SET_STATE(rq, AS_RQ_REMOVED); | |
| if (RQ_IOC(rq) && RQ_IOC(rq)->aic) | |
| atomic_dec(&RQ_IOC(rq)->aic->nr_dispatched); | |
| } | |
| static void as_deactivate_request(struct request_queue *q, struct request *rq) | |
| { | |
| WARN_ON(RQ_STATE(rq) != AS_RQ_REMOVED); | |
| RQ_SET_STATE(rq, AS_RQ_DISPATCHED); | |
| if (RQ_IOC(rq) && RQ_IOC(rq)->aic) | |
| atomic_inc(&RQ_IOC(rq)->aic->nr_dispatched); | |
| } | |
| /* | |
| * as_queue_empty tells us if there are requests left in the device. It may | |
| * not be the case that a driver can get the next request even if the queue | |
| * is not empty - it is used in the block layer to check for plugging and | |
| * merging opportunities | |
| */ | |
| static int as_queue_empty(struct request_queue *q) | |
| { | |
| struct as_data *ad = q->elevator->elevator_data; | |
| return list_empty(&ad->fifo_list[REQ_ASYNC]) | |
| && list_empty(&ad->fifo_list[REQ_SYNC]); | |
| } | |
| static int | |
| as_merge(struct request_queue *q, struct request **req, struct bio *bio) | |
| { | |
| struct as_data *ad = q->elevator->elevator_data; | |
| sector_t rb_key = bio->bi_sector + bio_sectors(bio); | |
| struct request *__rq; | |
| /* | |
| * check for front merge | |
| */ | |
| __rq = elv_rb_find(&ad->sort_list[bio_data_dir(bio)], rb_key); | |
| if (__rq && elv_rq_merge_ok(__rq, bio)) { | |
| *req = __rq; | |
| return ELEVATOR_FRONT_MERGE; | |
| } | |
| return ELEVATOR_NO_MERGE; | |
| } | |
| static void as_merged_request(struct request_queue *q, struct request *req, | |
| int type) | |
| { | |
| struct as_data *ad = q->elevator->elevator_data; | |
| /* | |
| * if the merge was a front merge, we need to reposition request | |
| */ | |
| if (type == ELEVATOR_FRONT_MERGE) { | |
| as_del_rq_rb(ad, req); | |
| as_add_rq_rb(ad, req); | |
| /* | |
| * Note! At this stage of this and the next function, our next | |
| * request may not be optimal - eg the request may have "grown" | |
| * behind the disk head. We currently don't bother adjusting. | |
| */ | |
| } | |
| } | |
| static void as_merged_requests(struct request_queue *q, struct request *req, | |
| struct request *next) | |
| { | |
| /* | |
| * if next expires before rq, assign its expire time to arq | |
| * and move into next position (next will be deleted) in fifo | |
| */ | |
| if (!list_empty(&req->queuelist) && !list_empty(&next->queuelist)) { | |
| if (time_before(rq_fifo_time(next), rq_fifo_time(req))) { | |
| list_move(&req->queuelist, &next->queuelist); | |
| rq_set_fifo_time(req, rq_fifo_time(next)); | |
| } | |
| } | |
| /* | |
| * kill knowledge of next, this one is a goner | |
| */ | |
| as_remove_queued_request(q, next); | |
| as_put_io_context(next); | |
| RQ_SET_STATE(next, AS_RQ_MERGED); | |
| } | |
| /* | |
| * This is executed in a "deferred" process context, by kblockd. It calls the | |
| * driver's request_fn so the driver can submit that request. | |
| * | |
| * IMPORTANT! This guy will reenter the elevator, so set up all queue global | |
| * state before calling, and don't rely on any state over calls. | |
| * | |
| * FIXME! dispatch queue is not a queue at all! | |
| */ | |
| static void as_work_handler(struct work_struct *work) | |
| { | |
| struct as_data *ad = container_of(work, struct as_data, antic_work); | |
| struct request_queue *q = ad->q; | |
| unsigned long flags; | |
| spin_lock_irqsave(q->queue_lock, flags); | |
| blk_start_queueing(q); | |
| spin_unlock_irqrestore(q->queue_lock, flags); | |
| } | |
| static int as_may_queue(struct request_queue *q, int rw) | |
| { | |
| int ret = ELV_MQUEUE_MAY; | |
| struct as_data *ad = q->elevator->elevator_data; | |
| struct io_context *ioc; | |
| if (ad->antic_status == ANTIC_WAIT_REQ || | |
| ad->antic_status == ANTIC_WAIT_NEXT) { | |
| ioc = as_get_io_context(q->node); | |
| if (ad->io_context == ioc) | |
| ret = ELV_MQUEUE_MUST; | |
| put_io_context(ioc); | |
| } | |
| return ret; | |
| } | |
| static void as_exit_queue(elevator_t *e) | |
| { | |
| struct as_data *ad = e->elevator_data; | |
| del_timer_sync(&ad->antic_timer); | |
| kblockd_flush_work(&ad->antic_work); | |
| BUG_ON(!list_empty(&ad->fifo_list[REQ_SYNC])); | |
| BUG_ON(!list_empty(&ad->fifo_list[REQ_ASYNC])); | |
| put_io_context(ad->io_context); | |
| kfree(ad); | |
| } | |
| /* | |
| * initialize elevator private data (as_data). | |
| */ | |
| static void *as_init_queue(struct request_queue *q) | |
| { | |
| struct as_data *ad; | |
| ad = kmalloc_node(sizeof(*ad), GFP_KERNEL | __GFP_ZERO, q->node); | |
| if (!ad) | |
| return NULL; | |
| ad->q = q; /* Identify what queue the data belongs to */ | |
| /* anticipatory scheduling helpers */ | |
| ad->antic_timer.function = as_antic_timeout; | |
| ad->antic_timer.data = (unsigned long)q; | |
| init_timer(&ad->antic_timer); | |
| INIT_WORK(&ad->antic_work, as_work_handler); | |
| INIT_LIST_HEAD(&ad->fifo_list[REQ_SYNC]); | |
| INIT_LIST_HEAD(&ad->fifo_list[REQ_ASYNC]); | |
| ad->sort_list[REQ_SYNC] = RB_ROOT; | |
| ad->sort_list[REQ_ASYNC] = RB_ROOT; | |
| ad->fifo_expire[REQ_SYNC] = default_read_expire; | |
| ad->fifo_expire[REQ_ASYNC] = default_write_expire; | |
| ad->antic_expire = default_antic_expire; | |
| ad->batch_expire[REQ_SYNC] = default_read_batch_expire; | |
| ad->batch_expire[REQ_ASYNC] = default_write_batch_expire; | |
| ad->current_batch_expires = jiffies + ad->batch_expire[REQ_SYNC]; | |
| ad->write_batch_count = ad->batch_expire[REQ_ASYNC] / 10; | |
| if (ad->write_batch_count < 2) | |
| ad->write_batch_count = 2; | |
| return ad; | |
| } | |
| /* | |
| * sysfs parts below | |
| */ | |
| static ssize_t | |
| as_var_show(unsigned int var, char *page) | |
| { | |
| return sprintf(page, "%d\n", var); | |
| } | |
| static ssize_t | |
| as_var_store(unsigned long *var, const char *page, size_t count) | |
| { | |
| char *p = (char *) page; | |
| *var = simple_strtoul(p, &p, 10); | |
| return count; | |
| } | |
| static ssize_t est_time_show(elevator_t *e, char *page) | |
| { | |
| struct as_data *ad = e->elevator_data; | |
| int pos = 0; | |
| pos += sprintf(page+pos, "%lu %% exit probability\n", | |
| 100*ad->exit_prob/256); | |
| pos += sprintf(page+pos, "%lu %% probability of exiting without a " | |
| "cooperating process submitting IO\n", | |
| 100*ad->exit_no_coop/256); | |
| pos += sprintf(page+pos, "%lu ms new thinktime\n", ad->new_ttime_mean); | |
| pos += sprintf(page+pos, "%llu sectors new seek distance\n", | |
| (unsigned long long)ad->new_seek_mean); | |
| return pos; | |
| } | |
| #define SHOW_FUNCTION(__FUNC, __VAR) \ | |
| static ssize_t __FUNC(elevator_t *e, char *page) \ | |
| { \ | |
| struct as_data *ad = e->elevator_data; \ | |
| return as_var_show(jiffies_to_msecs((__VAR)), (page)); \ | |
| } | |
| SHOW_FUNCTION(as_read_expire_show, ad->fifo_expire[REQ_SYNC]); | |
| SHOW_FUNCTION(as_write_expire_show, ad->fifo_expire[REQ_ASYNC]); | |
| SHOW_FUNCTION(as_antic_expire_show, ad->antic_expire); | |
| SHOW_FUNCTION(as_read_batch_expire_show, ad->batch_expire[REQ_SYNC]); | |
| SHOW_FUNCTION(as_write_batch_expire_show, ad->batch_expire[REQ_ASYNC]); | |
| #undef SHOW_FUNCTION | |
| #define STORE_FUNCTION(__FUNC, __PTR, MIN, MAX) \ | |
| static ssize_t __FUNC(elevator_t *e, const char *page, size_t count) \ | |
| { \ | |
| struct as_data *ad = e->elevator_data; \ | |
| int ret = as_var_store(__PTR, (page), count); \ | |
| if (*(__PTR) < (MIN)) \ | |
| *(__PTR) = (MIN); \ | |
| else if (*(__PTR) > (MAX)) \ | |
| *(__PTR) = (MAX); \ | |
| *(__PTR) = msecs_to_jiffies(*(__PTR)); \ | |
| return ret; \ | |
| } | |
| STORE_FUNCTION(as_read_expire_store, &ad->fifo_expire[REQ_SYNC], 0, INT_MAX); | |
| STORE_FUNCTION(as_write_expire_store, &ad->fifo_expire[REQ_ASYNC], 0, INT_MAX); | |
| STORE_FUNCTION(as_antic_expire_store, &ad->antic_expire, 0, INT_MAX); | |
| STORE_FUNCTION(as_read_batch_expire_store, | |
| &ad->batch_expire[REQ_SYNC], 0, INT_MAX); | |
| STORE_FUNCTION(as_write_batch_expire_store, | |
| &ad->batch_expire[REQ_ASYNC], 0, INT_MAX); | |
| #undef STORE_FUNCTION | |
| #define AS_ATTR(name) \ | |
| __ATTR(name, S_IRUGO|S_IWUSR, as_##name##_show, as_##name##_store) | |
| static struct elv_fs_entry as_attrs[] = { | |
| __ATTR_RO(est_time), | |
| AS_ATTR(read_expire), | |
| AS_ATTR(write_expire), | |
| AS_ATTR(antic_expire), | |
| AS_ATTR(read_batch_expire), | |
| AS_ATTR(write_batch_expire), | |
| __ATTR_NULL | |
| }; | |
| static struct elevator_type iosched_as = { | |
| .ops = { | |
| .elevator_merge_fn = as_merge, | |
| .elevator_merged_fn = as_merged_request, | |
| .elevator_merge_req_fn = as_merged_requests, | |
| .elevator_dispatch_fn = as_dispatch_request, | |
| .elevator_add_req_fn = as_add_request, | |
| .elevator_activate_req_fn = as_activate_request, | |
| .elevator_deactivate_req_fn = as_deactivate_request, | |
| .elevator_queue_empty_fn = as_queue_empty, | |
| .elevator_completed_req_fn = as_completed_request, | |
| .elevator_former_req_fn = elv_rb_former_request, | |
| .elevator_latter_req_fn = elv_rb_latter_request, | |
| .elevator_may_queue_fn = as_may_queue, | |
| .elevator_init_fn = as_init_queue, | |
| .elevator_exit_fn = as_exit_queue, | |
| .trim = as_trim, | |
| }, | |
| .elevator_attrs = as_attrs, | |
| .elevator_name = "anticipatory", | |
| .elevator_owner = THIS_MODULE, | |
| }; | |
| static int __init as_init(void) | |
| { | |
| elv_register(&iosched_as); | |
| return 0; | |
| } | |
| static void __exit as_exit(void) | |
| { | |
| DECLARE_COMPLETION_ONSTACK(all_gone); | |
| elv_unregister(&iosched_as); | |
| ioc_gone = &all_gone; | |
| /* ioc_gone's update must be visible before reading ioc_count */ | |
| smp_wmb(); | |
| if (elv_ioc_count_read(ioc_count)) | |
| wait_for_completion(ioc_gone); | |
| synchronize_rcu(); | |
| } | |
| module_init(as_init); | |
| module_exit(as_exit); | |
| MODULE_AUTHOR("Nick Piggin"); | |
| MODULE_LICENSE("GPL"); | |
| MODULE_DESCRIPTION("anticipatory IO scheduler"); |