| /* | |
| * Copyright (C) 1991, 1992 Linus Torvalds | |
| * | |
| * Pentium III FXSR, SSE support | |
| * Gareth Hughes <gareth@valinux.com>, May 2000 | |
| */ | |
| /* | |
| * 'Traps.c' handles hardware traps and faults after we have saved some | |
| * state in 'asm.s'. | |
| */ | |
| #include <linux/interrupt.h> | |
| #include <linux/kallsyms.h> | |
| #include <linux/spinlock.h> | |
| #include <linux/highmem.h> | |
| #include <linux/kprobes.h> | |
| #include <linux/uaccess.h> | |
| #include <linux/utsname.h> | |
| #include <linux/kdebug.h> | |
| #include <linux/kernel.h> | |
| #include <linux/module.h> | |
| #include <linux/ptrace.h> | |
| #include <linux/string.h> | |
| #include <linux/unwind.h> | |
| #include <linux/delay.h> | |
| #include <linux/errno.h> | |
| #include <linux/kexec.h> | |
| #include <linux/sched.h> | |
| #include <linux/timer.h> | |
| #include <linux/init.h> | |
| #include <linux/bug.h> | |
| #include <linux/nmi.h> | |
| #include <linux/mm.h> | |
| #ifdef CONFIG_EISA | |
| #include <linux/ioport.h> | |
| #include <linux/eisa.h> | |
| #endif | |
| #ifdef CONFIG_MCA | |
| #include <linux/mca.h> | |
| #endif | |
| #if defined(CONFIG_EDAC) | |
| #include <linux/edac.h> | |
| #endif | |
| #include <asm/arch_hooks.h> | |
| #include <asm/stacktrace.h> | |
| #include <asm/processor.h> | |
| #include <asm/debugreg.h> | |
| #include <asm/atomic.h> | |
| #include <asm/system.h> | |
| #include <asm/unwind.h> | |
| #include <asm/desc.h> | |
| #include <asm/i387.h> | |
| #include <asm/nmi.h> | |
| #include <asm/smp.h> | |
| #include <asm/io.h> | |
| #include "mach_traps.h" | |
| int panic_on_unrecovered_nmi; | |
| DECLARE_BITMAP(used_vectors, NR_VECTORS); | |
| EXPORT_SYMBOL_GPL(used_vectors); | |
| asmlinkage int system_call(void); | |
| /* Do we ignore FPU interrupts ? */ | |
| char ignore_fpu_irq; | |
| /* | |
| * The IDT has to be page-aligned to simplify the Pentium | |
| * F0 0F bug workaround.. We have a special link segment | |
| * for this. | |
| */ | |
| gate_desc idt_table[256] | |
| __attribute__((__section__(".data.idt"))) = { { { { 0, 0 } } }, }; | |
| asmlinkage void divide_error(void); | |
| asmlinkage void debug(void); | |
| asmlinkage void nmi(void); | |
| asmlinkage void int3(void); | |
| asmlinkage void overflow(void); | |
| asmlinkage void bounds(void); | |
| asmlinkage void invalid_op(void); | |
| asmlinkage void device_not_available(void); | |
| asmlinkage void coprocessor_segment_overrun(void); | |
| asmlinkage void invalid_TSS(void); | |
| asmlinkage void segment_not_present(void); | |
| asmlinkage void stack_segment(void); | |
| asmlinkage void general_protection(void); | |
| asmlinkage void page_fault(void); | |
| asmlinkage void coprocessor_error(void); | |
| asmlinkage void simd_coprocessor_error(void); | |
| asmlinkage void alignment_check(void); | |
| asmlinkage void spurious_interrupt_bug(void); | |
| asmlinkage void machine_check(void); | |
| int kstack_depth_to_print = 24; | |
| static unsigned int code_bytes = 64; | |
| void printk_address(unsigned long address, int reliable) | |
| { | |
| #ifdef CONFIG_KALLSYMS | |
| char namebuf[KSYM_NAME_LEN]; | |
| unsigned long offset = 0; | |
| unsigned long symsize; | |
| const char *symname; | |
| char reliab[4] = ""; | |
| char *delim = ":"; | |
| char *modname; | |
| symname = kallsyms_lookup(address, &symsize, &offset, | |
| &modname, namebuf); | |
| if (!symname) { | |
| printk(" [<%08lx>]\n", address); | |
| return; | |
| } | |
| if (!reliable) | |
| strcpy(reliab, "? "); | |
| if (!modname) | |
| modname = delim = ""; | |
| printk(" [<%08lx>] %s%s%s%s%s+0x%lx/0x%lx\n", | |
| address, reliab, delim, modname, delim, symname, offset, symsize); | |
| #else | |
| printk(" [<%08lx>]\n", address); | |
| #endif | |
| } | |
| static inline int valid_stack_ptr(struct thread_info *tinfo, void *p, unsigned size) | |
| { | |
| return p > (void *)tinfo && | |
| p <= (void *)tinfo + THREAD_SIZE - size; | |
| } | |
| /* The form of the top of the frame on the stack */ | |
| struct stack_frame { | |
| struct stack_frame *next_frame; | |
| unsigned long return_address; | |
| }; | |
| static inline unsigned long | |
| print_context_stack(struct thread_info *tinfo, | |
| unsigned long *stack, unsigned long bp, | |
| const struct stacktrace_ops *ops, void *data) | |
| { | |
| struct stack_frame *frame = (struct stack_frame *)bp; | |
| while (valid_stack_ptr(tinfo, stack, sizeof(*stack))) { | |
| unsigned long addr; | |
| addr = *stack; | |
| if (__kernel_text_address(addr)) { | |
| if ((unsigned long) stack == bp + 4) { | |
| ops->address(data, addr, 1); | |
| frame = frame->next_frame; | |
| bp = (unsigned long) frame; | |
| } else { | |
| ops->address(data, addr, bp == 0); | |
| } | |
| } | |
| stack++; | |
| } | |
| return bp; | |
| } | |
| #define MSG(msg) ops->warning(data, msg) | |
| void dump_trace(struct task_struct *task, struct pt_regs *regs, | |
| unsigned long *stack, unsigned long bp, | |
| const struct stacktrace_ops *ops, void *data) | |
| { | |
| if (!task) | |
| task = current; | |
| if (!stack) { | |
| unsigned long dummy; | |
| stack = &dummy; | |
| if (task != current) | |
| stack = (unsigned long *)task->thread.sp; | |
| } | |
| #ifdef CONFIG_FRAME_POINTER | |
| if (!bp) { | |
| if (task == current) { | |
| /* Grab bp right from our regs */ | |
| asm("movl %%ebp, %0" : "=r" (bp) :); | |
| } else { | |
| /* bp is the last reg pushed by switch_to */ | |
| bp = *(unsigned long *) task->thread.sp; | |
| } | |
| } | |
| #endif | |
| while (1) { | |
| struct thread_info *context; | |
| context = (struct thread_info *) | |
| ((unsigned long)stack & (~(THREAD_SIZE - 1))); | |
| bp = print_context_stack(context, stack, bp, ops, data); | |
| /* | |
| * Should be after the line below, but somewhere | |
| * in early boot context comes out corrupted and we | |
| * can't reference it: | |
| */ | |
| if (ops->stack(data, "IRQ") < 0) | |
| break; | |
| stack = (unsigned long *)context->previous_esp; | |
| if (!stack) | |
| break; | |
| touch_nmi_watchdog(); | |
| } | |
| } | |
| EXPORT_SYMBOL(dump_trace); | |
| static void | |
| print_trace_warning_symbol(void *data, char *msg, unsigned long symbol) | |
| { | |
| printk(data); | |
| print_symbol(msg, symbol); | |
| printk("\n"); | |
| } | |
| static void print_trace_warning(void *data, char *msg) | |
| { | |
| printk("%s%s\n", (char *)data, msg); | |
| } | |
| static int print_trace_stack(void *data, char *name) | |
| { | |
| return 0; | |
| } | |
| /* | |
| * Print one address/symbol entries per line. | |
| */ | |
| static void print_trace_address(void *data, unsigned long addr, int reliable) | |
| { | |
| printk("%s [<%08lx>] ", (char *)data, addr); | |
| if (!reliable) | |
| printk("? "); | |
| print_symbol("%s\n", addr); | |
| touch_nmi_watchdog(); | |
| } | |
| static const struct stacktrace_ops print_trace_ops = { | |
| .warning = print_trace_warning, | |
| .warning_symbol = print_trace_warning_symbol, | |
| .stack = print_trace_stack, | |
| .address = print_trace_address, | |
| }; | |
| static void | |
| show_trace_log_lvl(struct task_struct *task, struct pt_regs *regs, | |
| unsigned long *stack, unsigned long bp, char *log_lvl) | |
| { | |
| dump_trace(task, regs, stack, bp, &print_trace_ops, log_lvl); | |
| printk("%s =======================\n", log_lvl); | |
| } | |
| void show_trace(struct task_struct *task, struct pt_regs *regs, | |
| unsigned long *stack, unsigned long bp) | |
| { | |
| show_trace_log_lvl(task, regs, stack, bp, ""); | |
| } | |
| static void | |
| show_stack_log_lvl(struct task_struct *task, struct pt_regs *regs, | |
| unsigned long *sp, unsigned long bp, char *log_lvl) | |
| { | |
| unsigned long *stack; | |
| int i; | |
| if (sp == NULL) { | |
| if (task) | |
| sp = (unsigned long *)task->thread.sp; | |
| else | |
| sp = (unsigned long *)&sp; | |
| } | |
| stack = sp; | |
| for (i = 0; i < kstack_depth_to_print; i++) { | |
| if (kstack_end(stack)) | |
| break; | |
| if (i && ((i % 8) == 0)) | |
| printk("\n%s ", log_lvl); | |
| printk("%08lx ", *stack++); | |
| } | |
| printk("\n%sCall Trace:\n", log_lvl); | |
| show_trace_log_lvl(task, regs, sp, bp, log_lvl); | |
| } | |
| void show_stack(struct task_struct *task, unsigned long *sp) | |
| { | |
| printk(" "); | |
| show_stack_log_lvl(task, NULL, sp, 0, ""); | |
| } | |
| /* | |
| * The architecture-independent dump_stack generator | |
| */ | |
| void dump_stack(void) | |
| { | |
| unsigned long bp = 0; | |
| unsigned long stack; | |
| #ifdef CONFIG_FRAME_POINTER | |
| if (!bp) | |
| asm("movl %%ebp, %0" : "=r" (bp):); | |
| #endif | |
| printk("Pid: %d, comm: %.20s %s %s %.*s\n", | |
| current->pid, current->comm, print_tainted(), | |
| init_utsname()->release, | |
| (int)strcspn(init_utsname()->version, " "), | |
| init_utsname()->version); | |
| show_trace(current, NULL, &stack, bp); | |
| } | |
| EXPORT_SYMBOL(dump_stack); | |
| void show_registers(struct pt_regs *regs) | |
| { | |
| int i; | |
| print_modules(); | |
| __show_registers(regs, 0); | |
| printk(KERN_EMERG "Process %.*s (pid: %d, ti=%p task=%p task.ti=%p)", | |
| TASK_COMM_LEN, current->comm, task_pid_nr(current), | |
| current_thread_info(), current, task_thread_info(current)); | |
| /* | |
| * When in-kernel, we also print out the stack and code at the | |
| * time of the fault.. | |
| */ | |
| if (!user_mode_vm(regs)) { | |
| unsigned int code_prologue = code_bytes * 43 / 64; | |
| unsigned int code_len = code_bytes; | |
| unsigned char c; | |
| u8 *ip; | |
| printk("\n" KERN_EMERG "Stack: "); | |
| show_stack_log_lvl(NULL, regs, ®s->sp, 0, KERN_EMERG); | |
| printk(KERN_EMERG "Code: "); | |
| ip = (u8 *)regs->ip - code_prologue; | |
| if (ip < (u8 *)PAGE_OFFSET || | |
| probe_kernel_address(ip, c)) { | |
| /* try starting at EIP */ | |
| ip = (u8 *)regs->ip; | |
| code_len = code_len - code_prologue + 1; | |
| } | |
| for (i = 0; i < code_len; i++, ip++) { | |
| if (ip < (u8 *)PAGE_OFFSET || | |
| probe_kernel_address(ip, c)) { | |
| printk(" Bad EIP value."); | |
| break; | |
| } | |
| if (ip == (u8 *)regs->ip) | |
| printk("<%02x> ", c); | |
| else | |
| printk("%02x ", c); | |
| } | |
| } | |
| printk("\n"); | |
| } | |
| int is_valid_bugaddr(unsigned long ip) | |
| { | |
| unsigned short ud2; | |
| if (ip < PAGE_OFFSET) | |
| return 0; | |
| if (probe_kernel_address((unsigned short *)ip, ud2)) | |
| return 0; | |
| return ud2 == 0x0b0f; | |
| } | |
| static int die_counter; | |
| int __kprobes __die(const char *str, struct pt_regs *regs, long err) | |
| { | |
| unsigned short ss; | |
| unsigned long sp; | |
| printk(KERN_EMERG "%s: %04lx [#%d] ", str, err & 0xffff, ++die_counter); | |
| #ifdef CONFIG_PREEMPT | |
| printk("PREEMPT "); | |
| #endif | |
| #ifdef CONFIG_SMP | |
| printk("SMP "); | |
| #endif | |
| #ifdef CONFIG_DEBUG_PAGEALLOC | |
| printk("DEBUG_PAGEALLOC"); | |
| #endif | |
| printk("\n"); | |
| if (notify_die(DIE_OOPS, str, regs, err, | |
| current->thread.trap_no, SIGSEGV) != NOTIFY_STOP) { | |
| show_registers(regs); | |
| /* Executive summary in case the oops scrolled away */ | |
| sp = (unsigned long) (®s->sp); | |
| savesegment(ss, ss); | |
| if (user_mode(regs)) { | |
| sp = regs->sp; | |
| ss = regs->ss & 0xffff; | |
| } | |
| printk(KERN_EMERG "EIP: [<%08lx>] ", regs->ip); | |
| print_symbol("%s", regs->ip); | |
| printk(" SS:ESP %04x:%08lx\n", ss, sp); | |
| return 0; | |
| } | |
| return 1; | |
| } | |
| /* | |
| * This is gone through when something in the kernel has done something bad | |
| * and is about to be terminated: | |
| */ | |
| void die(const char *str, struct pt_regs *regs, long err) | |
| { | |
| static struct { | |
| raw_spinlock_t lock; | |
| u32 lock_owner; | |
| int lock_owner_depth; | |
| } die = { | |
| .lock = __RAW_SPIN_LOCK_UNLOCKED, | |
| .lock_owner = -1, | |
| .lock_owner_depth = 0 | |
| }; | |
| unsigned long flags; | |
| oops_enter(); | |
| if (die.lock_owner != raw_smp_processor_id()) { | |
| console_verbose(); | |
| raw_local_irq_save(flags); | |
| __raw_spin_lock(&die.lock); | |
| die.lock_owner = smp_processor_id(); | |
| die.lock_owner_depth = 0; | |
| bust_spinlocks(1); | |
| } else { | |
| raw_local_irq_save(flags); | |
| } | |
| if (++die.lock_owner_depth < 3) { | |
| report_bug(regs->ip, regs); | |
| if (__die(str, regs, err)) | |
| regs = NULL; | |
| } else { | |
| printk(KERN_EMERG "Recursive die() failure, output suppressed\n"); | |
| } | |
| bust_spinlocks(0); | |
| die.lock_owner = -1; | |
| add_taint(TAINT_DIE); | |
| __raw_spin_unlock(&die.lock); | |
| raw_local_irq_restore(flags); | |
| if (!regs) | |
| return; | |
| if (kexec_should_crash(current)) | |
| crash_kexec(regs); | |
| if (in_interrupt()) | |
| panic("Fatal exception in interrupt"); | |
| if (panic_on_oops) | |
| panic("Fatal exception"); | |
| oops_exit(); | |
| do_exit(SIGSEGV); | |
| } | |
| static inline void | |
| die_if_kernel(const char *str, struct pt_regs *regs, long err) | |
| { | |
| if (!user_mode_vm(regs)) | |
| die(str, regs, err); | |
| } | |
| static void __kprobes | |
| do_trap(int trapnr, int signr, char *str, int vm86, struct pt_regs *regs, | |
| long error_code, siginfo_t *info) | |
| { | |
| struct task_struct *tsk = current; | |
| if (regs->flags & X86_VM_MASK) { | |
| if (vm86) | |
| goto vm86_trap; | |
| goto trap_signal; | |
| } | |
| if (!user_mode(regs)) | |
| goto kernel_trap; | |
| trap_signal: | |
| /* | |
| * We want error_code and trap_no set for userspace faults and | |
| * kernelspace faults which result in die(), but not | |
| * kernelspace faults which are fixed up. die() gives the | |
| * process no chance to handle the signal and notice the | |
| * kernel fault information, so that won't result in polluting | |
| * the information about previously queued, but not yet | |
| * delivered, faults. See also do_general_protection below. | |
| */ | |
| tsk->thread.error_code = error_code; | |
| tsk->thread.trap_no = trapnr; | |
| if (info) | |
| force_sig_info(signr, info, tsk); | |
| else | |
| force_sig(signr, tsk); | |
| return; | |
| kernel_trap: | |
| if (!fixup_exception(regs)) { | |
| tsk->thread.error_code = error_code; | |
| tsk->thread.trap_no = trapnr; | |
| die(str, regs, error_code); | |
| } | |
| return; | |
| vm86_trap: | |
| if (handle_vm86_trap((struct kernel_vm86_regs *) regs, | |
| error_code, trapnr)) | |
| goto trap_signal; | |
| return; | |
| } | |
| #define DO_ERROR(trapnr, signr, str, name) \ | |
| void do_##name(struct pt_regs *regs, long error_code) \ | |
| { \ | |
| trace_hardirqs_fixup(); \ | |
| if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr) \ | |
| == NOTIFY_STOP) \ | |
| return; \ | |
| do_trap(trapnr, signr, str, 0, regs, error_code, NULL); \ | |
| } | |
| #define DO_ERROR_INFO(trapnr, signr, str, name, sicode, siaddr, irq) \ | |
| void do_##name(struct pt_regs *regs, long error_code) \ | |
| { \ | |
| siginfo_t info; \ | |
| if (irq) \ | |
| local_irq_enable(); \ | |
| info.si_signo = signr; \ | |
| info.si_errno = 0; \ | |
| info.si_code = sicode; \ | |
| info.si_addr = (void __user *)siaddr; \ | |
| if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr) \ | |
| == NOTIFY_STOP) \ | |
| return; \ | |
| do_trap(trapnr, signr, str, 0, regs, error_code, &info); \ | |
| } | |
| #define DO_VM86_ERROR(trapnr, signr, str, name) \ | |
| void do_##name(struct pt_regs *regs, long error_code) \ | |
| { \ | |
| if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr) \ | |
| == NOTIFY_STOP) \ | |
| return; \ | |
| do_trap(trapnr, signr, str, 1, regs, error_code, NULL); \ | |
| } | |
| #define DO_VM86_ERROR_INFO(trapnr, signr, str, name, sicode, siaddr) \ | |
| void do_##name(struct pt_regs *regs, long error_code) \ | |
| { \ | |
| siginfo_t info; \ | |
| info.si_signo = signr; \ | |
| info.si_errno = 0; \ | |
| info.si_code = sicode; \ | |
| info.si_addr = (void __user *)siaddr; \ | |
| trace_hardirqs_fixup(); \ | |
| if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr) \ | |
| == NOTIFY_STOP) \ | |
| return; \ | |
| do_trap(trapnr, signr, str, 1, regs, error_code, &info); \ | |
| } | |
| DO_VM86_ERROR_INFO(0, SIGFPE, "divide error", divide_error, FPE_INTDIV, regs->ip) | |
| #ifndef CONFIG_KPROBES | |
| DO_VM86_ERROR(3, SIGTRAP, "int3", int3) | |
| #endif | |
| DO_VM86_ERROR(4, SIGSEGV, "overflow", overflow) | |
| DO_VM86_ERROR(5, SIGSEGV, "bounds", bounds) | |
| DO_ERROR_INFO(6, SIGILL, "invalid opcode", invalid_op, ILL_ILLOPN, regs->ip, 0) | |
| DO_ERROR(9, SIGFPE, "coprocessor segment overrun", coprocessor_segment_overrun) | |
| DO_ERROR(10, SIGSEGV, "invalid TSS", invalid_TSS) | |
| DO_ERROR(11, SIGBUS, "segment not present", segment_not_present) | |
| DO_ERROR(12, SIGBUS, "stack segment", stack_segment) | |
| DO_ERROR_INFO(17, SIGBUS, "alignment check", alignment_check, BUS_ADRALN, 0, 0) | |
| DO_ERROR_INFO(32, SIGILL, "iret exception", iret_error, ILL_BADSTK, 0, 1) | |
| void __kprobes do_general_protection(struct pt_regs *regs, long error_code) | |
| { | |
| struct thread_struct *thread; | |
| struct tss_struct *tss; | |
| int cpu; | |
| cpu = get_cpu(); | |
| tss = &per_cpu(init_tss, cpu); | |
| thread = ¤t->thread; | |
| /* | |
| * Perform the lazy TSS's I/O bitmap copy. If the TSS has an | |
| * invalid offset set (the LAZY one) and the faulting thread has | |
| * a valid I/O bitmap pointer, we copy the I/O bitmap in the TSS | |
| * and we set the offset field correctly. Then we let the CPU to | |
| * restart the faulting instruction. | |
| */ | |
| if (tss->x86_tss.io_bitmap_base == INVALID_IO_BITMAP_OFFSET_LAZY && | |
| thread->io_bitmap_ptr) { | |
| memcpy(tss->io_bitmap, thread->io_bitmap_ptr, | |
| thread->io_bitmap_max); | |
| /* | |
| * If the previously set map was extending to higher ports | |
| * than the current one, pad extra space with 0xff (no access). | |
| */ | |
| if (thread->io_bitmap_max < tss->io_bitmap_max) { | |
| memset((char *) tss->io_bitmap + | |
| thread->io_bitmap_max, 0xff, | |
| tss->io_bitmap_max - thread->io_bitmap_max); | |
| } | |
| tss->io_bitmap_max = thread->io_bitmap_max; | |
| tss->x86_tss.io_bitmap_base = IO_BITMAP_OFFSET; | |
| tss->io_bitmap_owner = thread; | |
| put_cpu(); | |
| return; | |
| } | |
| put_cpu(); | |
| if (regs->flags & X86_VM_MASK) | |
| goto gp_in_vm86; | |
| if (!user_mode(regs)) | |
| goto gp_in_kernel; | |
| current->thread.error_code = error_code; | |
| current->thread.trap_no = 13; | |
| if (show_unhandled_signals && unhandled_signal(current, SIGSEGV) && | |
| printk_ratelimit()) { | |
| printk(KERN_INFO | |
| "%s[%d] general protection ip:%lx sp:%lx error:%lx", | |
| current->comm, task_pid_nr(current), | |
| regs->ip, regs->sp, error_code); | |
| print_vma_addr(" in ", regs->ip); | |
| printk("\n"); | |
| } | |
| force_sig(SIGSEGV, current); | |
| return; | |
| gp_in_vm86: | |
| local_irq_enable(); | |
| handle_vm86_fault((struct kernel_vm86_regs *) regs, error_code); | |
| return; | |
| gp_in_kernel: | |
| if (!fixup_exception(regs)) { | |
| current->thread.error_code = error_code; | |
| current->thread.trap_no = 13; | |
| if (notify_die(DIE_GPF, "general protection fault", regs, | |
| error_code, 13, SIGSEGV) == NOTIFY_STOP) | |
| return; | |
| die("general protection fault", regs, error_code); | |
| } | |
| } | |
| static notrace __kprobes void | |
| mem_parity_error(unsigned char reason, struct pt_regs *regs) | |
| { | |
| printk(KERN_EMERG | |
| "Uhhuh. NMI received for unknown reason %02x on CPU %d.\n", | |
| reason, smp_processor_id()); | |
| printk(KERN_EMERG | |
| "You have some hardware problem, likely on the PCI bus.\n"); | |
| #if defined(CONFIG_EDAC) | |
| if (edac_handler_set()) { | |
| edac_atomic_assert_error(); | |
| return; | |
| } | |
| #endif | |
| if (panic_on_unrecovered_nmi) | |
| panic("NMI: Not continuing"); | |
| printk(KERN_EMERG "Dazed and confused, but trying to continue\n"); | |
| /* Clear and disable the memory parity error line. */ | |
| clear_mem_error(reason); | |
| } | |
| static notrace __kprobes void | |
| io_check_error(unsigned char reason, struct pt_regs *regs) | |
| { | |
| unsigned long i; | |
| printk(KERN_EMERG "NMI: IOCK error (debug interrupt?)\n"); | |
| show_registers(regs); | |
| /* Re-enable the IOCK line, wait for a few seconds */ | |
| reason = (reason & 0xf) | 8; | |
| outb(reason, 0x61); | |
| i = 2000; | |
| while (--i) | |
| udelay(1000); | |
| reason &= ~8; | |
| outb(reason, 0x61); | |
| } | |
| static notrace __kprobes void | |
| unknown_nmi_error(unsigned char reason, struct pt_regs *regs) | |
| { | |
| if (notify_die(DIE_NMIUNKNOWN, "nmi", regs, reason, 2, SIGINT) == NOTIFY_STOP) | |
| return; | |
| #ifdef CONFIG_MCA | |
| /* | |
| * Might actually be able to figure out what the guilty party | |
| * is: | |
| */ | |
| if (MCA_bus) { | |
| mca_handle_nmi(); | |
| return; | |
| } | |
| #endif | |
| printk(KERN_EMERG | |
| "Uhhuh. NMI received for unknown reason %02x on CPU %d.\n", | |
| reason, smp_processor_id()); | |
| printk(KERN_EMERG "Do you have a strange power saving mode enabled?\n"); | |
| if (panic_on_unrecovered_nmi) | |
| panic("NMI: Not continuing"); | |
| printk(KERN_EMERG "Dazed and confused, but trying to continue\n"); | |
| } | |
| static DEFINE_SPINLOCK(nmi_print_lock); | |
| void notrace __kprobes die_nmi(struct pt_regs *regs, const char *msg) | |
| { | |
| if (notify_die(DIE_NMIWATCHDOG, msg, regs, 0, 2, SIGINT) == NOTIFY_STOP) | |
| return; | |
| spin_lock(&nmi_print_lock); | |
| /* | |
| * We are in trouble anyway, lets at least try | |
| * to get a message out: | |
| */ | |
| bust_spinlocks(1); | |
| printk(KERN_EMERG "%s", msg); | |
| printk(" on CPU%d, ip %08lx, registers:\n", | |
| smp_processor_id(), regs->ip); | |
| show_registers(regs); | |
| console_silent(); | |
| spin_unlock(&nmi_print_lock); | |
| bust_spinlocks(0); | |
| /* | |
| * If we are in kernel we are probably nested up pretty bad | |
| * and might aswell get out now while we still can: | |
| */ | |
| if (!user_mode_vm(regs)) { | |
| current->thread.trap_no = 2; | |
| crash_kexec(regs); | |
| } | |
| do_exit(SIGSEGV); | |
| } | |
| static notrace __kprobes void default_do_nmi(struct pt_regs *regs) | |
| { | |
| unsigned char reason = 0; | |
| /* Only the BSP gets external NMIs from the system: */ | |
| if (!smp_processor_id()) | |
| reason = get_nmi_reason(); | |
| if (!(reason & 0xc0)) { | |
| if (notify_die(DIE_NMI_IPI, "nmi_ipi", regs, reason, 2, SIGINT) | |
| == NOTIFY_STOP) | |
| return; | |
| #ifdef CONFIG_X86_LOCAL_APIC | |
| /* | |
| * Ok, so this is none of the documented NMI sources, | |
| * so it must be the NMI watchdog. | |
| */ | |
| if (nmi_watchdog_tick(regs, reason)) | |
| return; | |
| if (!do_nmi_callback(regs, smp_processor_id())) | |
| unknown_nmi_error(reason, regs); | |
| #else | |
| unknown_nmi_error(reason, regs); | |
| #endif | |
| return; | |
| } | |
| if (notify_die(DIE_NMI, "nmi", regs, reason, 2, SIGINT) == NOTIFY_STOP) | |
| return; | |
| if (reason & 0x80) | |
| mem_parity_error(reason, regs); | |
| if (reason & 0x40) | |
| io_check_error(reason, regs); | |
| /* | |
| * Reassert NMI in case it became active meanwhile | |
| * as it's edge-triggered: | |
| */ | |
| reassert_nmi(); | |
| } | |
| static int ignore_nmis; | |
| notrace __kprobes void do_nmi(struct pt_regs *regs, long error_code) | |
| { | |
| int cpu; | |
| nmi_enter(); | |
| cpu = smp_processor_id(); | |
| ++nmi_count(cpu); | |
| if (!ignore_nmis) | |
| default_do_nmi(regs); | |
| nmi_exit(); | |
| } | |
| void stop_nmi(void) | |
| { | |
| acpi_nmi_disable(); | |
| ignore_nmis++; | |
| } | |
| void restart_nmi(void) | |
| { | |
| ignore_nmis--; | |
| acpi_nmi_enable(); | |
| } | |
| #ifdef CONFIG_KPROBES | |
| void __kprobes do_int3(struct pt_regs *regs, long error_code) | |
| { | |
| trace_hardirqs_fixup(); | |
| if (notify_die(DIE_INT3, "int3", regs, error_code, 3, SIGTRAP) | |
| == NOTIFY_STOP) | |
| return; | |
| /* | |
| * This is an interrupt gate, because kprobes wants interrupts | |
| * disabled. Normal trap handlers don't. | |
| */ | |
| restore_interrupts(regs); | |
| do_trap(3, SIGTRAP, "int3", 1, regs, error_code, NULL); | |
| } | |
| #endif | |
| /* | |
| * Our handling of the processor debug registers is non-trivial. | |
| * We do not clear them on entry and exit from the kernel. Therefore | |
| * it is possible to get a watchpoint trap here from inside the kernel. | |
| * However, the code in ./ptrace.c has ensured that the user can | |
| * only set watchpoints on userspace addresses. Therefore the in-kernel | |
| * watchpoint trap can only occur in code which is reading/writing | |
| * from user space. Such code must not hold kernel locks (since it | |
| * can equally take a page fault), therefore it is safe to call | |
| * force_sig_info even though that claims and releases locks. | |
| * | |
| * Code in ./signal.c ensures that the debug control register | |
| * is restored before we deliver any signal, and therefore that | |
| * user code runs with the correct debug control register even though | |
| * we clear it here. | |
| * | |
| * Being careful here means that we don't have to be as careful in a | |
| * lot of more complicated places (task switching can be a bit lazy | |
| * about restoring all the debug state, and ptrace doesn't have to | |
| * find every occurrence of the TF bit that could be saved away even | |
| * by user code) | |
| */ | |
| void __kprobes do_debug(struct pt_regs *regs, long error_code) | |
| { | |
| struct task_struct *tsk = current; | |
| unsigned int condition; | |
| trace_hardirqs_fixup(); | |
| get_debugreg(condition, 6); | |
| /* | |
| * The processor cleared BTF, so don't mark that we need it set. | |
| */ | |
| clear_tsk_thread_flag(tsk, TIF_DEBUGCTLMSR); | |
| tsk->thread.debugctlmsr = 0; | |
| if (notify_die(DIE_DEBUG, "debug", regs, condition, error_code, | |
| SIGTRAP) == NOTIFY_STOP) | |
| return; | |
| /* It's safe to allow irq's after DR6 has been saved */ | |
| if (regs->flags & X86_EFLAGS_IF) | |
| local_irq_enable(); | |
| /* Mask out spurious debug traps due to lazy DR7 setting */ | |
| if (condition & (DR_TRAP0|DR_TRAP1|DR_TRAP2|DR_TRAP3)) { | |
| if (!tsk->thread.debugreg7) | |
| goto clear_dr7; | |
| } | |
| if (regs->flags & X86_VM_MASK) | |
| goto debug_vm86; | |
| /* Save debug status register where ptrace can see it */ | |
| tsk->thread.debugreg6 = condition; | |
| /* | |
| * Single-stepping through TF: make sure we ignore any events in | |
| * kernel space (but re-enable TF when returning to user mode). | |
| */ | |
| if (condition & DR_STEP) { | |
| /* | |
| * We already checked v86 mode above, so we can | |
| * check for kernel mode by just checking the CPL | |
| * of CS. | |
| */ | |
| if (!user_mode(regs)) | |
| goto clear_TF_reenable; | |
| } | |
| /* Ok, finally something we can handle */ | |
| send_sigtrap(tsk, regs, error_code); | |
| /* | |
| * Disable additional traps. They'll be re-enabled when | |
| * the signal is delivered. | |
| */ | |
| clear_dr7: | |
| set_debugreg(0, 7); | |
| return; | |
| debug_vm86: | |
| handle_vm86_trap((struct kernel_vm86_regs *) regs, error_code, 1); | |
| return; | |
| clear_TF_reenable: | |
| set_tsk_thread_flag(tsk, TIF_SINGLESTEP); | |
| regs->flags &= ~X86_EFLAGS_TF; | |
| return; | |
| } | |
| /* | |
| * Note that we play around with the 'TS' bit in an attempt to get | |
| * the correct behaviour even in the presence of the asynchronous | |
| * IRQ13 behaviour | |
| */ | |
| void math_error(void __user *ip) | |
| { | |
| struct task_struct *task; | |
| unsigned short cwd; | |
| unsigned short swd; | |
| siginfo_t info; | |
| /* | |
| * Save the info for the exception handler and clear the error. | |
| */ | |
| task = current; | |
| save_init_fpu(task); | |
| task->thread.trap_no = 16; | |
| task->thread.error_code = 0; | |
| info.si_signo = SIGFPE; | |
| info.si_errno = 0; | |
| info.si_code = __SI_FAULT; | |
| info.si_addr = ip; | |
| /* | |
| * (~cwd & swd) will mask out exceptions that are not set to unmasked | |
| * status. 0x3f is the exception bits in these regs, 0x200 is the | |
| * C1 reg you need in case of a stack fault, 0x040 is the stack | |
| * fault bit. We should only be taking one exception at a time, | |
| * so if this combination doesn't produce any single exception, | |
| * then we have a bad program that isn't syncronizing its FPU usage | |
| * and it will suffer the consequences since we won't be able to | |
| * fully reproduce the context of the exception | |
| */ | |
| cwd = get_fpu_cwd(task); | |
| swd = get_fpu_swd(task); | |
| switch (swd & ~cwd & 0x3f) { | |
| case 0x000: /* No unmasked exception */ | |
| return; | |
| default: /* Multiple exceptions */ | |
| break; | |
| case 0x001: /* Invalid Op */ | |
| /* | |
| * swd & 0x240 == 0x040: Stack Underflow | |
| * swd & 0x240 == 0x240: Stack Overflow | |
| * User must clear the SF bit (0x40) if set | |
| */ | |
| info.si_code = FPE_FLTINV; | |
| break; | |
| case 0x002: /* Denormalize */ | |
| case 0x010: /* Underflow */ | |
| info.si_code = FPE_FLTUND; | |
| break; | |
| case 0x004: /* Zero Divide */ | |
| info.si_code = FPE_FLTDIV; | |
| break; | |
| case 0x008: /* Overflow */ | |
| info.si_code = FPE_FLTOVF; | |
| break; | |
| case 0x020: /* Precision */ | |
| info.si_code = FPE_FLTRES; | |
| break; | |
| } | |
| force_sig_info(SIGFPE, &info, task); | |
| } | |
| void do_coprocessor_error(struct pt_regs *regs, long error_code) | |
| { | |
| ignore_fpu_irq = 1; | |
| math_error((void __user *)regs->ip); | |
| } | |
| static void simd_math_error(void __user *ip) | |
| { | |
| struct task_struct *task; | |
| unsigned short mxcsr; | |
| siginfo_t info; | |
| /* | |
| * Save the info for the exception handler and clear the error. | |
| */ | |
| task = current; | |
| save_init_fpu(task); | |
| task->thread.trap_no = 19; | |
| task->thread.error_code = 0; | |
| info.si_signo = SIGFPE; | |
| info.si_errno = 0; | |
| info.si_code = __SI_FAULT; | |
| info.si_addr = ip; | |
| /* | |
| * The SIMD FPU exceptions are handled a little differently, as there | |
| * is only a single status/control register. Thus, to determine which | |
| * unmasked exception was caught we must mask the exception mask bits | |
| * at 0x1f80, and then use these to mask the exception bits at 0x3f. | |
| */ | |
| mxcsr = get_fpu_mxcsr(task); | |
| switch (~((mxcsr & 0x1f80) >> 7) & (mxcsr & 0x3f)) { | |
| case 0x000: | |
| default: | |
| break; | |
| case 0x001: /* Invalid Op */ | |
| info.si_code = FPE_FLTINV; | |
| break; | |
| case 0x002: /* Denormalize */ | |
| case 0x010: /* Underflow */ | |
| info.si_code = FPE_FLTUND; | |
| break; | |
| case 0x004: /* Zero Divide */ | |
| info.si_code = FPE_FLTDIV; | |
| break; | |
| case 0x008: /* Overflow */ | |
| info.si_code = FPE_FLTOVF; | |
| break; | |
| case 0x020: /* Precision */ | |
| info.si_code = FPE_FLTRES; | |
| break; | |
| } | |
| force_sig_info(SIGFPE, &info, task); | |
| } | |
| void do_simd_coprocessor_error(struct pt_regs *regs, long error_code) | |
| { | |
| if (cpu_has_xmm) { | |
| /* Handle SIMD FPU exceptions on PIII+ processors. */ | |
| ignore_fpu_irq = 1; | |
| simd_math_error((void __user *)regs->ip); | |
| return; | |
| } | |
| /* | |
| * Handle strange cache flush from user space exception | |
| * in all other cases. This is undocumented behaviour. | |
| */ | |
| if (regs->flags & X86_VM_MASK) { | |
| handle_vm86_fault((struct kernel_vm86_regs *)regs, error_code); | |
| return; | |
| } | |
| current->thread.trap_no = 19; | |
| current->thread.error_code = error_code; | |
| die_if_kernel("cache flush denied", regs, error_code); | |
| force_sig(SIGSEGV, current); | |
| } | |
| void do_spurious_interrupt_bug(struct pt_regs *regs, long error_code) | |
| { | |
| #if 0 | |
| /* No need to warn about this any longer. */ | |
| printk(KERN_INFO "Ignoring P6 Local APIC Spurious Interrupt Bug...\n"); | |
| #endif | |
| } | |
| unsigned long patch_espfix_desc(unsigned long uesp, unsigned long kesp) | |
| { | |
| struct desc_struct *gdt = __get_cpu_var(gdt_page).gdt; | |
| unsigned long base = (kesp - uesp) & -THREAD_SIZE; | |
| unsigned long new_kesp = kesp - base; | |
| unsigned long lim_pages = (new_kesp | (THREAD_SIZE - 1)) >> PAGE_SHIFT; | |
| __u64 desc = *(__u64 *)&gdt[GDT_ENTRY_ESPFIX_SS]; | |
| /* Set up base for espfix segment */ | |
| desc &= 0x00f0ff0000000000ULL; | |
| desc |= ((((__u64)base) << 16) & 0x000000ffffff0000ULL) | | |
| ((((__u64)base) << 32) & 0xff00000000000000ULL) | | |
| ((((__u64)lim_pages) << 32) & 0x000f000000000000ULL) | | |
| (lim_pages & 0xffff); | |
| *(__u64 *)&gdt[GDT_ENTRY_ESPFIX_SS] = desc; | |
| return new_kesp; | |
| } | |
| /* | |
| * 'math_state_restore()' saves the current math information in the | |
| * old math state array, and gets the new ones from the current task | |
| * | |
| * Careful.. There are problems with IBM-designed IRQ13 behaviour. | |
| * Don't touch unless you *really* know how it works. | |
| * | |
| * Must be called with kernel preemption disabled (in this case, | |
| * local interrupts are disabled at the call-site in entry.S). | |
| */ | |
| asmlinkage void math_state_restore(void) | |
| { | |
| struct thread_info *thread = current_thread_info(); | |
| struct task_struct *tsk = thread->task; | |
| if (!tsk_used_math(tsk)) { | |
| local_irq_enable(); | |
| /* | |
| * does a slab alloc which can sleep | |
| */ | |
| if (init_fpu(tsk)) { | |
| /* | |
| * ran out of memory! | |
| */ | |
| do_group_exit(SIGKILL); | |
| return; | |
| } | |
| local_irq_disable(); | |
| } | |
| clts(); /* Allow maths ops (or we recurse) */ | |
| restore_fpu(tsk); | |
| thread->status |= TS_USEDFPU; /* So we fnsave on switch_to() */ | |
| tsk->fpu_counter++; | |
| } | |
| EXPORT_SYMBOL_GPL(math_state_restore); | |
| #ifndef CONFIG_MATH_EMULATION | |
| asmlinkage void math_emulate(long arg) | |
| { | |
| printk(KERN_EMERG | |
| "math-emulation not enabled and no coprocessor found.\n"); | |
| printk(KERN_EMERG "killing %s.\n", current->comm); | |
| force_sig(SIGFPE, current); | |
| schedule(); | |
| } | |
| #endif /* CONFIG_MATH_EMULATION */ | |
| void __init trap_init(void) | |
| { | |
| int i; | |
| #ifdef CONFIG_EISA | |
| void __iomem *p = early_ioremap(0x0FFFD9, 4); | |
| if (readl(p) == 'E' + ('I'<<8) + ('S'<<16) + ('A'<<24)) | |
| EISA_bus = 1; | |
| early_iounmap(p, 4); | |
| #endif | |
| #ifdef CONFIG_X86_LOCAL_APIC | |
| init_apic_mappings(); | |
| #endif | |
| set_trap_gate(0, ÷_error); | |
| set_intr_gate(1, &debug); | |
| set_intr_gate(2, &nmi); | |
| set_system_intr_gate(3, &int3); /* int3/4 can be called from all */ | |
| set_system_gate(4, &overflow); | |
| set_trap_gate(5, &bounds); | |
| set_trap_gate(6, &invalid_op); | |
| set_trap_gate(7, &device_not_available); | |
| set_task_gate(8, GDT_ENTRY_DOUBLEFAULT_TSS); | |
| set_trap_gate(9, &coprocessor_segment_overrun); | |
| set_trap_gate(10, &invalid_TSS); | |
| set_trap_gate(11, &segment_not_present); | |
| set_trap_gate(12, &stack_segment); | |
| set_trap_gate(13, &general_protection); | |
| set_intr_gate(14, &page_fault); | |
| set_trap_gate(15, &spurious_interrupt_bug); | |
| set_trap_gate(16, &coprocessor_error); | |
| set_trap_gate(17, &alignment_check); | |
| #ifdef CONFIG_X86_MCE | |
| set_trap_gate(18, &machine_check); | |
| #endif | |
| set_trap_gate(19, &simd_coprocessor_error); | |
| if (cpu_has_fxsr) { | |
| printk(KERN_INFO "Enabling fast FPU save and restore... "); | |
| set_in_cr4(X86_CR4_OSFXSR); | |
| printk("done.\n"); | |
| } | |
| if (cpu_has_xmm) { | |
| printk(KERN_INFO | |
| "Enabling unmasked SIMD FPU exception support... "); | |
| set_in_cr4(X86_CR4_OSXMMEXCPT); | |
| printk("done.\n"); | |
| } | |
| set_system_gate(SYSCALL_VECTOR, &system_call); | |
| /* Reserve all the builtin and the syscall vector: */ | |
| for (i = 0; i < FIRST_EXTERNAL_VECTOR; i++) | |
| set_bit(i, used_vectors); | |
| set_bit(SYSCALL_VECTOR, used_vectors); | |
| init_thread_xstate(); | |
| /* | |
| * Should be a barrier for any external CPU state: | |
| */ | |
| cpu_init(); | |
| trap_init_hook(); | |
| } | |
| static int __init kstack_setup(char *s) | |
| { | |
| kstack_depth_to_print = simple_strtoul(s, NULL, 0); | |
| return 1; | |
| } | |
| __setup("kstack=", kstack_setup); | |
| static int __init code_bytes_setup(char *s) | |
| { | |
| code_bytes = simple_strtoul(s, NULL, 0); | |
| if (code_bytes > 8192) | |
| code_bytes = 8192; | |
| return 1; | |
| } | |
| __setup("code_bytes=", code_bytes_setup); |