| /* | |
| * Intel SMP support routines. | |
| * | |
| * (c) 1995 Alan Cox, Building #3 <alan@redhat.com> | |
| * (c) 1998-99, 2000 Ingo Molnar <mingo@redhat.com> | |
| * (c) 2002,2003 Andi Kleen, SuSE Labs. | |
| * | |
| * i386 and x86_64 integration by Glauber Costa <gcosta@redhat.com> | |
| * | |
| * This code is released under the GNU General Public License version 2 or | |
| * later. | |
| */ | |
| #include <linux/init.h> | |
| #include <linux/mm.h> | |
| #include <linux/delay.h> | |
| #include <linux/spinlock.h> | |
| #include <linux/kernel_stat.h> | |
| #include <linux/mc146818rtc.h> | |
| #include <linux/cache.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/cpu.h> | |
| #include <asm/mtrr.h> | |
| #include <asm/tlbflush.h> | |
| #include <asm/mmu_context.h> | |
| #include <asm/proto.h> | |
| #include <mach_ipi.h> | |
| #include <mach_apic.h> | |
| /* | |
| * Some notes on x86 processor bugs affecting SMP operation: | |
| * | |
| * Pentium, Pentium Pro, II, III (and all CPUs) have bugs. | |
| * The Linux implications for SMP are handled as follows: | |
| * | |
| * Pentium III / [Xeon] | |
| * None of the E1AP-E3AP errata are visible to the user. | |
| * | |
| * E1AP. see PII A1AP | |
| * E2AP. see PII A2AP | |
| * E3AP. see PII A3AP | |
| * | |
| * Pentium II / [Xeon] | |
| * None of the A1AP-A3AP errata are visible to the user. | |
| * | |
| * A1AP. see PPro 1AP | |
| * A2AP. see PPro 2AP | |
| * A3AP. see PPro 7AP | |
| * | |
| * Pentium Pro | |
| * None of 1AP-9AP errata are visible to the normal user, | |
| * except occasional delivery of 'spurious interrupt' as trap #15. | |
| * This is very rare and a non-problem. | |
| * | |
| * 1AP. Linux maps APIC as non-cacheable | |
| * 2AP. worked around in hardware | |
| * 3AP. fixed in C0 and above steppings microcode update. | |
| * Linux does not use excessive STARTUP_IPIs. | |
| * 4AP. worked around in hardware | |
| * 5AP. symmetric IO mode (normal Linux operation) not affected. | |
| * 'noapic' mode has vector 0xf filled out properly. | |
| * 6AP. 'noapic' mode might be affected - fixed in later steppings | |
| * 7AP. We do not assume writes to the LVT deassering IRQs | |
| * 8AP. We do not enable low power mode (deep sleep) during MP bootup | |
| * 9AP. We do not use mixed mode | |
| * | |
| * Pentium | |
| * There is a marginal case where REP MOVS on 100MHz SMP | |
| * machines with B stepping processors can fail. XXX should provide | |
| * an L1cache=Writethrough or L1cache=off option. | |
| * | |
| * B stepping CPUs may hang. There are hardware work arounds | |
| * for this. We warn about it in case your board doesn't have the work | |
| * arounds. Basically that's so I can tell anyone with a B stepping | |
| * CPU and SMP problems "tough". | |
| * | |
| * Specific items [From Pentium Processor Specification Update] | |
| * | |
| * 1AP. Linux doesn't use remote read | |
| * 2AP. Linux doesn't trust APIC errors | |
| * 3AP. We work around this | |
| * 4AP. Linux never generated 3 interrupts of the same priority | |
| * to cause a lost local interrupt. | |
| * 5AP. Remote read is never used | |
| * 6AP. not affected - worked around in hardware | |
| * 7AP. not affected - worked around in hardware | |
| * 8AP. worked around in hardware - we get explicit CS errors if not | |
| * 9AP. only 'noapic' mode affected. Might generate spurious | |
| * interrupts, we log only the first one and count the | |
| * rest silently. | |
| * 10AP. not affected - worked around in hardware | |
| * 11AP. Linux reads the APIC between writes to avoid this, as per | |
| * the documentation. Make sure you preserve this as it affects | |
| * the C stepping chips too. | |
| * 12AP. not affected - worked around in hardware | |
| * 13AP. not affected - worked around in hardware | |
| * 14AP. we always deassert INIT during bootup | |
| * 15AP. not affected - worked around in hardware | |
| * 16AP. not affected - worked around in hardware | |
| * 17AP. not affected - worked around in hardware | |
| * 18AP. not affected - worked around in hardware | |
| * 19AP. not affected - worked around in BIOS | |
| * | |
| * If this sounds worrying believe me these bugs are either ___RARE___, | |
| * or are signal timing bugs worked around in hardware and there's | |
| * about nothing of note with C stepping upwards. | |
| */ | |
| /* | |
| * this function sends a 'reschedule' IPI to another CPU. | |
| * it goes straight through and wastes no time serializing | |
| * anything. Worst case is that we lose a reschedule ... | |
| */ | |
| static void native_smp_send_reschedule(int cpu) | |
| { | |
| if (unlikely(cpu_is_offline(cpu))) { | |
| WARN_ON(1); | |
| return; | |
| } | |
| send_IPI_mask(cpumask_of_cpu(cpu), RESCHEDULE_VECTOR); | |
| } | |
| /* | |
| * Structure and data for smp_call_function(). This is designed to minimise | |
| * static memory requirements. It also looks cleaner. | |
| */ | |
| static DEFINE_SPINLOCK(call_lock); | |
| struct call_data_struct { | |
| void (*func) (void *info); | |
| void *info; | |
| atomic_t started; | |
| atomic_t finished; | |
| int wait; | |
| }; | |
| void lock_ipi_call_lock(void) | |
| { | |
| spin_lock_irq(&call_lock); | |
| } | |
| void unlock_ipi_call_lock(void) | |
| { | |
| spin_unlock_irq(&call_lock); | |
| } | |
| static struct call_data_struct *call_data; | |
| static void __smp_call_function(void (*func) (void *info), void *info, | |
| int nonatomic, int wait) | |
| { | |
| struct call_data_struct data; | |
| int cpus = num_online_cpus() - 1; | |
| if (!cpus) | |
| return; | |
| data.func = func; | |
| data.info = info; | |
| atomic_set(&data.started, 0); | |
| data.wait = wait; | |
| if (wait) | |
| atomic_set(&data.finished, 0); | |
| call_data = &data; | |
| mb(); | |
| /* Send a message to all other CPUs and wait for them to respond */ | |
| send_IPI_allbutself(CALL_FUNCTION_VECTOR); | |
| /* Wait for response */ | |
| while (atomic_read(&data.started) != cpus) | |
| cpu_relax(); | |
| if (wait) | |
| while (atomic_read(&data.finished) != cpus) | |
| cpu_relax(); | |
| } | |
| /** | |
| * smp_call_function_mask(): Run a function on a set of other CPUs. | |
| * @mask: The set of cpus to run on. Must not include the current cpu. | |
| * @func: The function to run. This must be fast and non-blocking. | |
| * @info: An arbitrary pointer to pass to the function. | |
| * @wait: If true, wait (atomically) until function has completed on other CPUs. | |
| * | |
| * Returns 0 on success, else a negative status code. | |
| * | |
| * If @wait is true, then returns once @func has returned; otherwise | |
| * it returns just before the target cpu calls @func. | |
| * | |
| * You must not call this function with disabled interrupts or from a | |
| * hardware interrupt handler or from a bottom half handler. | |
| */ | |
| static int | |
| native_smp_call_function_mask(cpumask_t mask, | |
| void (*func)(void *), void *info, | |
| int wait) | |
| { | |
| struct call_data_struct data; | |
| cpumask_t allbutself; | |
| int cpus; | |
| /* Can deadlock when called with interrupts disabled */ | |
| WARN_ON(irqs_disabled()); | |
| /* Holding any lock stops cpus from going down. */ | |
| spin_lock(&call_lock); | |
| allbutself = cpu_online_map; | |
| cpu_clear(smp_processor_id(), allbutself); | |
| cpus_and(mask, mask, allbutself); | |
| cpus = cpus_weight(mask); | |
| if (!cpus) { | |
| spin_unlock(&call_lock); | |
| return 0; | |
| } | |
| data.func = func; | |
| data.info = info; | |
| atomic_set(&data.started, 0); | |
| data.wait = wait; | |
| if (wait) | |
| atomic_set(&data.finished, 0); | |
| call_data = &data; | |
| wmb(); | |
| /* Send a message to other CPUs */ | |
| if (cpus_equal(mask, allbutself) && | |
| cpus_equal(cpu_online_map, cpu_callout_map)) | |
| send_IPI_allbutself(CALL_FUNCTION_VECTOR); | |
| else | |
| send_IPI_mask(mask, CALL_FUNCTION_VECTOR); | |
| /* Wait for response */ | |
| while (atomic_read(&data.started) != cpus) | |
| cpu_relax(); | |
| if (wait) | |
| while (atomic_read(&data.finished) != cpus) | |
| cpu_relax(); | |
| spin_unlock(&call_lock); | |
| return 0; | |
| } | |
| static void stop_this_cpu(void *dummy) | |
| { | |
| local_irq_disable(); | |
| /* | |
| * Remove this CPU: | |
| */ | |
| cpu_clear(smp_processor_id(), cpu_online_map); | |
| disable_local_APIC(); | |
| if (hlt_works(smp_processor_id())) | |
| for (;;) halt(); | |
| for (;;); | |
| } | |
| /* | |
| * this function calls the 'stop' function on all other CPUs in the system. | |
| */ | |
| static void native_smp_send_stop(void) | |
| { | |
| int nolock; | |
| unsigned long flags; | |
| if (reboot_force) | |
| return; | |
| /* Don't deadlock on the call lock in panic */ | |
| nolock = !spin_trylock(&call_lock); | |
| local_irq_save(flags); | |
| __smp_call_function(stop_this_cpu, NULL, 0, 0); | |
| if (!nolock) | |
| spin_unlock(&call_lock); | |
| disable_local_APIC(); | |
| local_irq_restore(flags); | |
| } | |
| /* | |
| * Reschedule call back. Nothing to do, | |
| * all the work is done automatically when | |
| * we return from the interrupt. | |
| */ | |
| void smp_reschedule_interrupt(struct pt_regs *regs) | |
| { | |
| ack_APIC_irq(); | |
| #ifdef CONFIG_X86_32 | |
| __get_cpu_var(irq_stat).irq_resched_count++; | |
| #else | |
| add_pda(irq_resched_count, 1); | |
| #endif | |
| } | |
| void smp_call_function_interrupt(struct pt_regs *regs) | |
| { | |
| void (*func) (void *info) = call_data->func; | |
| void *info = call_data->info; | |
| int wait = call_data->wait; | |
| ack_APIC_irq(); | |
| /* | |
| * Notify initiating CPU that I've grabbed the data and am | |
| * about to execute the function | |
| */ | |
| mb(); | |
| atomic_inc(&call_data->started); | |
| /* | |
| * At this point the info structure may be out of scope unless wait==1 | |
| */ | |
| irq_enter(); | |
| (*func)(info); | |
| #ifdef CONFIG_X86_32 | |
| __get_cpu_var(irq_stat).irq_call_count++; | |
| #else | |
| add_pda(irq_call_count, 1); | |
| #endif | |
| irq_exit(); | |
| if (wait) { | |
| mb(); | |
| atomic_inc(&call_data->finished); | |
| } | |
| } | |
| struct smp_ops smp_ops = { | |
| .smp_prepare_boot_cpu = native_smp_prepare_boot_cpu, | |
| .smp_prepare_cpus = native_smp_prepare_cpus, | |
| .cpu_up = native_cpu_up, | |
| .smp_cpus_done = native_smp_cpus_done, | |
| .smp_send_stop = native_smp_send_stop, | |
| .smp_send_reschedule = native_smp_send_reschedule, | |
| .smp_call_function_mask = native_smp_call_function_mask, | |
| }; | |
| EXPORT_SYMBOL_GPL(smp_ops); | |