| /* | |
| * arch/sh/kernel/timers/timer-cmt.c - CMT Timer Support | |
| * | |
| * Copyright (C) 2005 Yoshinori Sato | |
| * | |
| * This file is subject to the terms and conditions of the GNU General Public | |
| * License. See the file "COPYING" in the main directory of this archive | |
| * for more details. | |
| */ | |
| #include <linux/init.h> | |
| #include <linux/kernel.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/seqlock.h> | |
| #include <asm/timer.h> | |
| #include <asm/rtc.h> | |
| #include <asm/io.h> | |
| #include <asm/irq.h> | |
| #include <asm/clock.h> | |
| #if defined(CONFIG_CPU_SUBTYPE_SH7619) | |
| #define CMT_CMSTR 0xf84a0070 | |
| #define CMT_CMCSR_0 0xf84a0072 | |
| #define CMT_CMCNT_0 0xf84a0074 | |
| #define CMT_CMCOR_0 0xf84a0076 | |
| #define CMT_CMCSR_1 0xf84a0078 | |
| #define CMT_CMCNT_1 0xf84a007a | |
| #define CMT_CMCOR_1 0xf84a007c | |
| #define STBCR3 0xf80a0000 | |
| #define cmt_clock_enable() do { ctrl_outb(ctrl_inb(STBCR3) & ~0x10, STBCR3); } while(0) | |
| #define CMT_CMCSR_INIT 0x0040 | |
| #define CMT_CMCSR_CALIB 0x0000 | |
| #elif defined(CONFIG_CPU_SUBTYPE_SH7203) || \ | |
| defined(CONFIG_CPU_SUBTYPE_SH7206) || \ | |
| defined(CONFIG_CPU_SUBTYPE_SH7263) | |
| #define CMT_CMSTR 0xfffec000 | |
| #define CMT_CMCSR_0 0xfffec002 | |
| #define CMT_CMCNT_0 0xfffec004 | |
| #define CMT_CMCOR_0 0xfffec006 | |
| #define STBCR4 0xfffe040c | |
| #define cmt_clock_enable() do { ctrl_outb(ctrl_inb(STBCR4) & ~0x04, STBCR4); } while(0) | |
| #define CMT_CMCSR_INIT 0x0040 | |
| #define CMT_CMCSR_CALIB 0x0000 | |
| #else | |
| #error "Unknown CPU SUBTYPE" | |
| #endif | |
| static unsigned long cmt_timer_get_offset(void) | |
| { | |
| int count; | |
| static unsigned short count_p = 0xffff; /* for the first call after boot */ | |
| static unsigned long jiffies_p = 0; | |
| /* | |
| * cache volatile jiffies temporarily; we have IRQs turned off. | |
| */ | |
| unsigned long jiffies_t; | |
| /* timer count may underflow right here */ | |
| count = ctrl_inw(CMT_CMCOR_0); | |
| count -= ctrl_inw(CMT_CMCNT_0); | |
| jiffies_t = jiffies; | |
| /* | |
| * avoiding timer inconsistencies (they are rare, but they happen)... | |
| * there is one kind of problem that must be avoided here: | |
| * 1. the timer counter underflows | |
| */ | |
| if (jiffies_t == jiffies_p) { | |
| if (count > count_p) { | |
| /* the nutcase */ | |
| if (ctrl_inw(CMT_CMCSR_0) & 0x80) { /* Check CMF bit */ | |
| count -= LATCH; | |
| } else { | |
| printk("%s (): hardware timer problem?\n", | |
| __func__); | |
| } | |
| } | |
| } else | |
| jiffies_p = jiffies_t; | |
| count_p = count; | |
| count = ((LATCH-1) - count) * TICK_SIZE; | |
| count = (count + LATCH/2) / LATCH; | |
| return count; | |
| } | |
| static irqreturn_t cmt_timer_interrupt(int irq, void *dev_id) | |
| { | |
| unsigned long timer_status; | |
| /* Clear CMF bit */ | |
| timer_status = ctrl_inw(CMT_CMCSR_0); | |
| timer_status &= ~0x80; | |
| ctrl_outw(timer_status, CMT_CMCSR_0); | |
| handle_timer_tick(); | |
| return IRQ_HANDLED; | |
| } | |
| static struct irqaction cmt_irq = { | |
| .name = "timer", | |
| .handler = cmt_timer_interrupt, | |
| .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, | |
| .mask = CPU_MASK_NONE, | |
| }; | |
| static void cmt_clk_init(struct clk *clk) | |
| { | |
| u8 divisor = CMT_CMCSR_INIT & 0x3; | |
| ctrl_inw(CMT_CMCSR_0); | |
| ctrl_outw(CMT_CMCSR_INIT, CMT_CMCSR_0); | |
| clk->parent = clk_get(NULL, "module_clk"); | |
| clk->rate = clk->parent->rate / (8 << (divisor << 1)); | |
| } | |
| static void cmt_clk_recalc(struct clk *clk) | |
| { | |
| u8 divisor = ctrl_inw(CMT_CMCSR_0) & 0x3; | |
| clk->rate = clk->parent->rate / (8 << (divisor << 1)); | |
| } | |
| static struct clk_ops cmt_clk_ops = { | |
| .init = cmt_clk_init, | |
| .recalc = cmt_clk_recalc, | |
| }; | |
| static struct clk cmt0_clk = { | |
| .name = "cmt0_clk", | |
| .ops = &cmt_clk_ops, | |
| }; | |
| static int cmt_timer_start(void) | |
| { | |
| ctrl_outw(ctrl_inw(CMT_CMSTR) | 0x01, CMT_CMSTR); | |
| return 0; | |
| } | |
| static int cmt_timer_stop(void) | |
| { | |
| ctrl_outw(ctrl_inw(CMT_CMSTR) & ~0x01, CMT_CMSTR); | |
| return 0; | |
| } | |
| static int cmt_timer_init(void) | |
| { | |
| unsigned long interval; | |
| cmt_clock_enable(); | |
| setup_irq(CONFIG_SH_TIMER_IRQ, &cmt_irq); | |
| cmt0_clk.parent = clk_get(NULL, "module_clk"); | |
| cmt_timer_stop(); | |
| interval = cmt0_clk.parent->rate / 8 / HZ; | |
| printk(KERN_INFO "Interval = %ld\n", interval); | |
| ctrl_outw(interval, CMT_CMCOR_0); | |
| clk_register(&cmt0_clk); | |
| clk_enable(&cmt0_clk); | |
| cmt_timer_start(); | |
| return 0; | |
| } | |
| struct sys_timer_ops cmt_timer_ops = { | |
| .init = cmt_timer_init, | |
| .start = cmt_timer_start, | |
| .stop = cmt_timer_stop, | |
| #ifndef CONFIG_GENERIC_TIME | |
| .get_offset = cmt_timer_get_offset, | |
| #endif | |
| }; | |
| struct sys_timer cmt_timer = { | |
| .name = "cmt", | |
| .ops = &cmt_timer_ops, | |
| }; |