| /* | |
| * arch/sh/kernel/cpu/clock.c - SuperH clock framework | |
| * | |
| * Copyright (C) 2005, 2006, 2007 Paul Mundt | |
| * | |
| * This clock framework is derived from the OMAP version by: | |
| * | |
| * Copyright (C) 2004 - 2005 Nokia Corporation | |
| * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com> | |
| * | |
| * Modified for omap shared clock framework by Tony Lindgren <tony@atomide.com> | |
| * | |
| * This file is subject to the terms and conditions of the GNU General Public | |
| * License. See the file "COPYING" in the main directory of this archive | |
| * for more details. | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/init.h> | |
| #include <linux/module.h> | |
| #include <linux/mutex.h> | |
| #include <linux/list.h> | |
| #include <linux/kref.h> | |
| #include <linux/seq_file.h> | |
| #include <linux/err.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/proc_fs.h> | |
| #include <asm/clock.h> | |
| #include <asm/timer.h> | |
| static LIST_HEAD(clock_list); | |
| static DEFINE_SPINLOCK(clock_lock); | |
| static DEFINE_MUTEX(clock_list_sem); | |
| /* | |
| * Each subtype is expected to define the init routines for these clocks, | |
| * as each subtype (or processor family) will have these clocks at the | |
| * very least. These are all provided through the CPG, which even some of | |
| * the more quirky parts (such as ST40, SH4-202, etc.) still have. | |
| * | |
| * The processor-specific code is expected to register any additional | |
| * clock sources that are of interest. | |
| */ | |
| static struct clk master_clk = { | |
| .name = "master_clk", | |
| .flags = CLK_ALWAYS_ENABLED | CLK_RATE_PROPAGATES, | |
| .rate = CONFIG_SH_PCLK_FREQ, | |
| }; | |
| static struct clk module_clk = { | |
| .name = "module_clk", | |
| .parent = &master_clk, | |
| .flags = CLK_ALWAYS_ENABLED | CLK_RATE_PROPAGATES, | |
| }; | |
| static struct clk bus_clk = { | |
| .name = "bus_clk", | |
| .parent = &master_clk, | |
| .flags = CLK_ALWAYS_ENABLED | CLK_RATE_PROPAGATES, | |
| }; | |
| static struct clk cpu_clk = { | |
| .name = "cpu_clk", | |
| .parent = &master_clk, | |
| .flags = CLK_ALWAYS_ENABLED, | |
| }; | |
| /* | |
| * The ordering of these clocks matters, do not change it. | |
| */ | |
| static struct clk *onchip_clocks[] = { | |
| &master_clk, | |
| &module_clk, | |
| &bus_clk, | |
| &cpu_clk, | |
| }; | |
| static void propagate_rate(struct clk *clk) | |
| { | |
| struct clk *clkp; | |
| list_for_each_entry(clkp, &clock_list, node) { | |
| if (likely(clkp->parent != clk)) | |
| continue; | |
| if (likely(clkp->ops && clkp->ops->recalc)) | |
| clkp->ops->recalc(clkp); | |
| if (unlikely(clkp->flags & CLK_RATE_PROPAGATES)) | |
| propagate_rate(clkp); | |
| } | |
| } | |
| int __clk_enable(struct clk *clk) | |
| { | |
| /* | |
| * See if this is the first time we're enabling the clock, some | |
| * clocks that are always enabled still require "special" | |
| * initialization. This is especially true if the clock mode | |
| * changes and the clock needs to hunt for the proper set of | |
| * divisors to use before it can effectively recalc. | |
| */ | |
| if (unlikely(atomic_read(&clk->kref.refcount) == 1)) | |
| if (clk->ops && clk->ops->init) | |
| clk->ops->init(clk); | |
| kref_get(&clk->kref); | |
| if (clk->flags & CLK_ALWAYS_ENABLED) | |
| return 0; | |
| if (likely(clk->ops && clk->ops->enable)) | |
| clk->ops->enable(clk); | |
| return 0; | |
| } | |
| EXPORT_SYMBOL_GPL(__clk_enable); | |
| int clk_enable(struct clk *clk) | |
| { | |
| unsigned long flags; | |
| int ret; | |
| spin_lock_irqsave(&clock_lock, flags); | |
| ret = __clk_enable(clk); | |
| spin_unlock_irqrestore(&clock_lock, flags); | |
| return ret; | |
| } | |
| EXPORT_SYMBOL_GPL(clk_enable); | |
| static void clk_kref_release(struct kref *kref) | |
| { | |
| /* Nothing to do */ | |
| } | |
| void __clk_disable(struct clk *clk) | |
| { | |
| int count = kref_put(&clk->kref, clk_kref_release); | |
| if (clk->flags & CLK_ALWAYS_ENABLED) | |
| return; | |
| if (!count) { /* count reaches zero, disable the clock */ | |
| if (likely(clk->ops && clk->ops->disable)) | |
| clk->ops->disable(clk); | |
| } | |
| } | |
| EXPORT_SYMBOL_GPL(__clk_disable); | |
| void clk_disable(struct clk *clk) | |
| { | |
| unsigned long flags; | |
| spin_lock_irqsave(&clock_lock, flags); | |
| __clk_disable(clk); | |
| spin_unlock_irqrestore(&clock_lock, flags); | |
| } | |
| EXPORT_SYMBOL_GPL(clk_disable); | |
| int clk_register(struct clk *clk) | |
| { | |
| mutex_lock(&clock_list_sem); | |
| list_add(&clk->node, &clock_list); | |
| kref_init(&clk->kref); | |
| mutex_unlock(&clock_list_sem); | |
| if (clk->flags & CLK_ALWAYS_ENABLED) { | |
| pr_debug( "Clock '%s' is ALWAYS_ENABLED\n", clk->name); | |
| if (clk->ops && clk->ops->init) | |
| clk->ops->init(clk); | |
| if (clk->ops && clk->ops->enable) | |
| clk->ops->enable(clk); | |
| pr_debug( "Enabled."); | |
| } | |
| return 0; | |
| } | |
| EXPORT_SYMBOL_GPL(clk_register); | |
| void clk_unregister(struct clk *clk) | |
| { | |
| mutex_lock(&clock_list_sem); | |
| list_del(&clk->node); | |
| mutex_unlock(&clock_list_sem); | |
| } | |
| EXPORT_SYMBOL_GPL(clk_unregister); | |
| unsigned long clk_get_rate(struct clk *clk) | |
| { | |
| return clk->rate; | |
| } | |
| EXPORT_SYMBOL_GPL(clk_get_rate); | |
| int clk_set_rate(struct clk *clk, unsigned long rate) | |
| { | |
| return clk_set_rate_ex(clk, rate, 0); | |
| } | |
| EXPORT_SYMBOL_GPL(clk_set_rate); | |
| int clk_set_rate_ex(struct clk *clk, unsigned long rate, int algo_id) | |
| { | |
| int ret = -EOPNOTSUPP; | |
| if (likely(clk->ops && clk->ops->set_rate)) { | |
| unsigned long flags; | |
| spin_lock_irqsave(&clock_lock, flags); | |
| ret = clk->ops->set_rate(clk, rate, algo_id); | |
| spin_unlock_irqrestore(&clock_lock, flags); | |
| } | |
| if (unlikely(clk->flags & CLK_RATE_PROPAGATES)) | |
| propagate_rate(clk); | |
| return ret; | |
| } | |
| EXPORT_SYMBOL_GPL(clk_set_rate_ex); | |
| void clk_recalc_rate(struct clk *clk) | |
| { | |
| if (likely(clk->ops && clk->ops->recalc)) { | |
| unsigned long flags; | |
| spin_lock_irqsave(&clock_lock, flags); | |
| clk->ops->recalc(clk); | |
| spin_unlock_irqrestore(&clock_lock, flags); | |
| } | |
| if (unlikely(clk->flags & CLK_RATE_PROPAGATES)) | |
| propagate_rate(clk); | |
| } | |
| EXPORT_SYMBOL_GPL(clk_recalc_rate); | |
| long clk_round_rate(struct clk *clk, unsigned long rate) | |
| { | |
| if (likely(clk->ops && clk->ops->round_rate)) { | |
| unsigned long flags, rounded; | |
| spin_lock_irqsave(&clock_lock, flags); | |
| rounded = clk->ops->round_rate(clk, rate); | |
| spin_unlock_irqrestore(&clock_lock, flags); | |
| return rounded; | |
| } | |
| return clk_get_rate(clk); | |
| } | |
| EXPORT_SYMBOL_GPL(clk_round_rate); | |
| /* | |
| * Returns a clock. Note that we first try to use device id on the bus | |
| * and clock name. If this fails, we try to use clock name only. | |
| */ | |
| struct clk *clk_get(struct device *dev, const char *id) | |
| { | |
| struct clk *p, *clk = ERR_PTR(-ENOENT); | |
| int idno; | |
| if (dev == NULL || dev->bus != &platform_bus_type) | |
| idno = -1; | |
| else | |
| idno = to_platform_device(dev)->id; | |
| mutex_lock(&clock_list_sem); | |
| list_for_each_entry(p, &clock_list, node) { | |
| if (p->id == idno && | |
| strcmp(id, p->name) == 0 && try_module_get(p->owner)) { | |
| clk = p; | |
| goto found; | |
| } | |
| } | |
| list_for_each_entry(p, &clock_list, node) { | |
| if (strcmp(id, p->name) == 0 && try_module_get(p->owner)) { | |
| clk = p; | |
| break; | |
| } | |
| } | |
| found: | |
| mutex_unlock(&clock_list_sem); | |
| return clk; | |
| } | |
| EXPORT_SYMBOL_GPL(clk_get); | |
| void clk_put(struct clk *clk) | |
| { | |
| if (clk && !IS_ERR(clk)) | |
| module_put(clk->owner); | |
| } | |
| EXPORT_SYMBOL_GPL(clk_put); | |
| void __init __attribute__ ((weak)) | |
| arch_init_clk_ops(struct clk_ops **ops, int type) | |
| { | |
| } | |
| void __init __attribute__ ((weak)) | |
| arch_clk_init(void) | |
| { | |
| } | |
| static int show_clocks(char *buf, char **start, off_t off, | |
| int len, int *eof, void *data) | |
| { | |
| struct clk *clk; | |
| char *p = buf; | |
| list_for_each_entry_reverse(clk, &clock_list, node) { | |
| unsigned long rate = clk_get_rate(clk); | |
| /* | |
| * Don't bother listing dummy clocks with no ancestry | |
| * that only support enable and disable ops. | |
| */ | |
| if (unlikely(!rate && !clk->parent)) | |
| continue; | |
| p += sprintf(p, "%-12s\t: %ld.%02ldMHz\n", clk->name, | |
| rate / 1000000, (rate % 1000000) / 10000); | |
| } | |
| return p - buf; | |
| } | |
| int __init clk_init(void) | |
| { | |
| int i, ret = 0; | |
| BUG_ON(!master_clk.rate); | |
| for (i = 0; i < ARRAY_SIZE(onchip_clocks); i++) { | |
| struct clk *clk = onchip_clocks[i]; | |
| arch_init_clk_ops(&clk->ops, i); | |
| ret |= clk_register(clk); | |
| } | |
| arch_clk_init(); | |
| /* Kick the child clocks.. */ | |
| propagate_rate(&master_clk); | |
| propagate_rate(&bus_clk); | |
| return ret; | |
| } | |
| static int __init clk_proc_init(void) | |
| { | |
| struct proc_dir_entry *p; | |
| p = create_proc_read_entry("clocks", S_IRUSR, NULL, | |
| show_clocks, NULL); | |
| if (unlikely(!p)) | |
| return -EINVAL; | |
| return 0; | |
| } | |
| subsys_initcall(clk_proc_init); |