| /* | |
| * arch/s390/kernel/setup.c | |
| * | |
| * S390 version | |
| * Copyright (C) 1999,2000 IBM Deutschland Entwicklung GmbH, IBM Corporation | |
| * Author(s): Hartmut Penner (hp@de.ibm.com), | |
| * Martin Schwidefsky (schwidefsky@de.ibm.com) | |
| * | |
| * Derived from "arch/i386/kernel/setup.c" | |
| * Copyright (C) 1995, Linus Torvalds | |
| */ | |
| /* | |
| * This file handles the architecture-dependent parts of initialization | |
| */ | |
| #include <linux/errno.h> | |
| #include <linux/module.h> | |
| #include <linux/sched.h> | |
| #include <linux/kernel.h> | |
| #include <linux/mm.h> | |
| #include <linux/stddef.h> | |
| #include <linux/unistd.h> | |
| #include <linux/ptrace.h> | |
| #include <linux/slab.h> | |
| #include <linux/user.h> | |
| #include <linux/tty.h> | |
| #include <linux/ioport.h> | |
| #include <linux/delay.h> | |
| #include <linux/init.h> | |
| #include <linux/initrd.h> | |
| #include <linux/bootmem.h> | |
| #include <linux/root_dev.h> | |
| #include <linux/console.h> | |
| #include <linux/seq_file.h> | |
| #include <linux/kernel_stat.h> | |
| #include <linux/device.h> | |
| #include <linux/notifier.h> | |
| #include <linux/pfn.h> | |
| #include <linux/ctype.h> | |
| #include <linux/reboot.h> | |
| #include <linux/topology.h> | |
| #include <asm/ipl.h> | |
| #include <asm/uaccess.h> | |
| #include <asm/system.h> | |
| #include <asm/smp.h> | |
| #include <asm/mmu_context.h> | |
| #include <asm/cpcmd.h> | |
| #include <asm/lowcore.h> | |
| #include <asm/irq.h> | |
| #include <asm/page.h> | |
| #include <asm/ptrace.h> | |
| #include <asm/sections.h> | |
| #include <asm/ebcdic.h> | |
| #include <asm/compat.h> | |
| long psw_kernel_bits = (PSW_BASE_BITS | PSW_MASK_DAT | PSW_ASC_PRIMARY | | |
| PSW_MASK_MCHECK | PSW_DEFAULT_KEY); | |
| long psw_user_bits = (PSW_BASE_BITS | PSW_MASK_DAT | PSW_ASC_HOME | | |
| PSW_MASK_IO | PSW_MASK_EXT | PSW_MASK_MCHECK | | |
| PSW_MASK_PSTATE | PSW_DEFAULT_KEY); | |
| /* | |
| * User copy operations. | |
| */ | |
| struct uaccess_ops uaccess; | |
| EXPORT_SYMBOL(uaccess); | |
| /* | |
| * Machine setup.. | |
| */ | |
| unsigned int console_mode = 0; | |
| unsigned int console_devno = -1; | |
| unsigned int console_irq = -1; | |
| unsigned long machine_flags; | |
| unsigned long elf_hwcap = 0; | |
| char elf_platform[ELF_PLATFORM_SIZE]; | |
| struct mem_chunk __meminitdata memory_chunk[MEMORY_CHUNKS]; | |
| volatile int __cpu_logical_map[NR_CPUS]; /* logical cpu to cpu address */ | |
| static unsigned long __initdata memory_end; | |
| /* | |
| * This is set up by the setup-routine at boot-time | |
| * for S390 need to find out, what we have to setup | |
| * using address 0x10400 ... | |
| */ | |
| #include <asm/setup.h> | |
| static struct resource code_resource = { | |
| .name = "Kernel code", | |
| .flags = IORESOURCE_BUSY | IORESOURCE_MEM, | |
| }; | |
| static struct resource data_resource = { | |
| .name = "Kernel data", | |
| .flags = IORESOURCE_BUSY | IORESOURCE_MEM, | |
| }; | |
| /* | |
| * cpu_init() initializes state that is per-CPU. | |
| */ | |
| void __cpuinit cpu_init(void) | |
| { | |
| int addr = hard_smp_processor_id(); | |
| /* | |
| * Store processor id in lowcore (used e.g. in timer_interrupt) | |
| */ | |
| get_cpu_id(&S390_lowcore.cpu_data.cpu_id); | |
| S390_lowcore.cpu_data.cpu_addr = addr; | |
| /* | |
| * Force FPU initialization: | |
| */ | |
| clear_thread_flag(TIF_USEDFPU); | |
| clear_used_math(); | |
| atomic_inc(&init_mm.mm_count); | |
| current->active_mm = &init_mm; | |
| if (current->mm) | |
| BUG(); | |
| enter_lazy_tlb(&init_mm, current); | |
| } | |
| /* | |
| * condev= and conmode= setup parameter. | |
| */ | |
| static int __init condev_setup(char *str) | |
| { | |
| int vdev; | |
| vdev = simple_strtoul(str, &str, 0); | |
| if (vdev >= 0 && vdev < 65536) { | |
| console_devno = vdev; | |
| console_irq = -1; | |
| } | |
| return 1; | |
| } | |
| __setup("condev=", condev_setup); | |
| static int __init conmode_setup(char *str) | |
| { | |
| #if defined(CONFIG_SCLP_CONSOLE) || defined(CONFIG_SCLP_VT220_CONSOLE) | |
| if (strncmp(str, "hwc", 4) == 0 || strncmp(str, "sclp", 5) == 0) | |
| SET_CONSOLE_SCLP; | |
| #endif | |
| #if defined(CONFIG_TN3215_CONSOLE) | |
| if (strncmp(str, "3215", 5) == 0) | |
| SET_CONSOLE_3215; | |
| #endif | |
| #if defined(CONFIG_TN3270_CONSOLE) | |
| if (strncmp(str, "3270", 5) == 0) | |
| SET_CONSOLE_3270; | |
| #endif | |
| return 1; | |
| } | |
| __setup("conmode=", conmode_setup); | |
| static void __init conmode_default(void) | |
| { | |
| char query_buffer[1024]; | |
| char *ptr; | |
| if (MACHINE_IS_VM) { | |
| cpcmd("QUERY CONSOLE", query_buffer, 1024, NULL); | |
| console_devno = simple_strtoul(query_buffer + 5, NULL, 16); | |
| ptr = strstr(query_buffer, "SUBCHANNEL ="); | |
| console_irq = simple_strtoul(ptr + 13, NULL, 16); | |
| cpcmd("QUERY TERM", query_buffer, 1024, NULL); | |
| ptr = strstr(query_buffer, "CONMODE"); | |
| /* | |
| * Set the conmode to 3215 so that the device recognition | |
| * will set the cu_type of the console to 3215. If the | |
| * conmode is 3270 and we don't set it back then both | |
| * 3215 and the 3270 driver will try to access the console | |
| * device (3215 as console and 3270 as normal tty). | |
| */ | |
| cpcmd("TERM CONMODE 3215", NULL, 0, NULL); | |
| if (ptr == NULL) { | |
| #if defined(CONFIG_SCLP_CONSOLE) || defined(CONFIG_SCLP_VT220_CONSOLE) | |
| SET_CONSOLE_SCLP; | |
| #endif | |
| return; | |
| } | |
| if (strncmp(ptr + 8, "3270", 4) == 0) { | |
| #if defined(CONFIG_TN3270_CONSOLE) | |
| SET_CONSOLE_3270; | |
| #elif defined(CONFIG_TN3215_CONSOLE) | |
| SET_CONSOLE_3215; | |
| #elif defined(CONFIG_SCLP_CONSOLE) || defined(CONFIG_SCLP_VT220_CONSOLE) | |
| SET_CONSOLE_SCLP; | |
| #endif | |
| } else if (strncmp(ptr + 8, "3215", 4) == 0) { | |
| #if defined(CONFIG_TN3215_CONSOLE) | |
| SET_CONSOLE_3215; | |
| #elif defined(CONFIG_TN3270_CONSOLE) | |
| SET_CONSOLE_3270; | |
| #elif defined(CONFIG_SCLP_CONSOLE) || defined(CONFIG_SCLP_VT220_CONSOLE) | |
| SET_CONSOLE_SCLP; | |
| #endif | |
| } | |
| } else if (MACHINE_IS_P390) { | |
| #if defined(CONFIG_TN3215_CONSOLE) | |
| SET_CONSOLE_3215; | |
| #elif defined(CONFIG_TN3270_CONSOLE) | |
| SET_CONSOLE_3270; | |
| #endif | |
| } else { | |
| #if defined(CONFIG_SCLP_CONSOLE) || defined(CONFIG_SCLP_VT220_CONSOLE) | |
| SET_CONSOLE_SCLP; | |
| #endif | |
| } | |
| } | |
| #if defined(CONFIG_ZFCPDUMP) || defined(CONFIG_ZFCPDUMP_MODULE) | |
| static void __init setup_zfcpdump(unsigned int console_devno) | |
| { | |
| static char str[64]; | |
| if (ipl_info.type != IPL_TYPE_FCP_DUMP) | |
| return; | |
| if (console_devno != -1) | |
| sprintf(str, "cio_ignore=all,!0.0.%04x,!0.0.%04x", | |
| ipl_info.data.fcp.dev_id.devno, console_devno); | |
| else | |
| sprintf(str, "cio_ignore=all,!0.0.%04x", | |
| ipl_info.data.fcp.dev_id.devno); | |
| strcat(COMMAND_LINE, " "); | |
| strcat(COMMAND_LINE, str); | |
| console_loglevel = 2; | |
| } | |
| #else | |
| static inline void setup_zfcpdump(unsigned int console_devno) {} | |
| #endif /* CONFIG_ZFCPDUMP */ | |
| /* | |
| * Reboot, halt and power_off stubs. They just call _machine_restart, | |
| * _machine_halt or _machine_power_off. | |
| */ | |
| void machine_restart(char *command) | |
| { | |
| if ((!in_interrupt() && !in_atomic()) || oops_in_progress) | |
| /* | |
| * Only unblank the console if we are called in enabled | |
| * context or a bust_spinlocks cleared the way for us. | |
| */ | |
| console_unblank(); | |
| _machine_restart(command); | |
| } | |
| void machine_halt(void) | |
| { | |
| if (!in_interrupt() || oops_in_progress) | |
| /* | |
| * Only unblank the console if we are called in enabled | |
| * context or a bust_spinlocks cleared the way for us. | |
| */ | |
| console_unblank(); | |
| _machine_halt(); | |
| } | |
| void machine_power_off(void) | |
| { | |
| if (!in_interrupt() || oops_in_progress) | |
| /* | |
| * Only unblank the console if we are called in enabled | |
| * context or a bust_spinlocks cleared the way for us. | |
| */ | |
| console_unblank(); | |
| _machine_power_off(); | |
| } | |
| /* | |
| * Dummy power off function. | |
| */ | |
| void (*pm_power_off)(void) = machine_power_off; | |
| static int __init early_parse_mem(char *p) | |
| { | |
| memory_end = memparse(p, &p); | |
| return 0; | |
| } | |
| early_param("mem", early_parse_mem); | |
| /* | |
| * "ipldelay=XXX[sm]" sets ipl delay in seconds or minutes | |
| */ | |
| static int __init early_parse_ipldelay(char *p) | |
| { | |
| unsigned long delay = 0; | |
| delay = simple_strtoul(p, &p, 0); | |
| switch (*p) { | |
| case 's': | |
| case 'S': | |
| delay *= 1000000; | |
| break; | |
| case 'm': | |
| case 'M': | |
| delay *= 60 * 1000000; | |
| } | |
| /* now wait for the requested amount of time */ | |
| udelay(delay); | |
| return 0; | |
| } | |
| early_param("ipldelay", early_parse_ipldelay); | |
| #ifdef CONFIG_S390_SWITCH_AMODE | |
| #ifdef CONFIG_PGSTE | |
| unsigned int switch_amode = 1; | |
| #else | |
| unsigned int switch_amode = 0; | |
| #endif | |
| EXPORT_SYMBOL_GPL(switch_amode); | |
| static void set_amode_and_uaccess(unsigned long user_amode, | |
| unsigned long user32_amode) | |
| { | |
| psw_user_bits = PSW_BASE_BITS | PSW_MASK_DAT | user_amode | | |
| PSW_MASK_IO | PSW_MASK_EXT | PSW_MASK_MCHECK | | |
| PSW_MASK_PSTATE | PSW_DEFAULT_KEY; | |
| #ifdef CONFIG_COMPAT | |
| psw_user32_bits = PSW_BASE32_BITS | PSW_MASK_DAT | user_amode | | |
| PSW_MASK_IO | PSW_MASK_EXT | PSW_MASK_MCHECK | | |
| PSW_MASK_PSTATE | PSW_DEFAULT_KEY; | |
| psw32_user_bits = PSW32_BASE_BITS | PSW32_MASK_DAT | user32_amode | | |
| PSW32_MASK_IO | PSW32_MASK_EXT | PSW32_MASK_MCHECK | | |
| PSW32_MASK_PSTATE; | |
| #endif | |
| psw_kernel_bits = PSW_BASE_BITS | PSW_MASK_DAT | PSW_ASC_HOME | | |
| PSW_MASK_MCHECK | PSW_DEFAULT_KEY; | |
| if (MACHINE_HAS_MVCOS) { | |
| printk("mvcos available.\n"); | |
| memcpy(&uaccess, &uaccess_mvcos_switch, sizeof(uaccess)); | |
| } else { | |
| printk("mvcos not available.\n"); | |
| memcpy(&uaccess, &uaccess_pt, sizeof(uaccess)); | |
| } | |
| } | |
| /* | |
| * Switch kernel/user addressing modes? | |
| */ | |
| static int __init early_parse_switch_amode(char *p) | |
| { | |
| switch_amode = 1; | |
| return 0; | |
| } | |
| early_param("switch_amode", early_parse_switch_amode); | |
| #else /* CONFIG_S390_SWITCH_AMODE */ | |
| static inline void set_amode_and_uaccess(unsigned long user_amode, | |
| unsigned long user32_amode) | |
| { | |
| } | |
| #endif /* CONFIG_S390_SWITCH_AMODE */ | |
| #ifdef CONFIG_S390_EXEC_PROTECT | |
| unsigned int s390_noexec = 0; | |
| EXPORT_SYMBOL_GPL(s390_noexec); | |
| /* | |
| * Enable execute protection? | |
| */ | |
| static int __init early_parse_noexec(char *p) | |
| { | |
| if (!strncmp(p, "off", 3)) | |
| return 0; | |
| switch_amode = 1; | |
| s390_noexec = 1; | |
| return 0; | |
| } | |
| early_param("noexec", early_parse_noexec); | |
| #endif /* CONFIG_S390_EXEC_PROTECT */ | |
| static void setup_addressing_mode(void) | |
| { | |
| if (s390_noexec) { | |
| printk("S390 execute protection active, "); | |
| set_amode_and_uaccess(PSW_ASC_SECONDARY, PSW32_ASC_SECONDARY); | |
| } else if (switch_amode) { | |
| printk("S390 address spaces switched, "); | |
| set_amode_and_uaccess(PSW_ASC_PRIMARY, PSW32_ASC_PRIMARY); | |
| } | |
| #ifdef CONFIG_TRACE_IRQFLAGS | |
| sysc_restore_trace_psw.mask = psw_kernel_bits & ~PSW_MASK_MCHECK; | |
| io_restore_trace_psw.mask = psw_kernel_bits & ~PSW_MASK_MCHECK; | |
| #endif | |
| } | |
| static void __init | |
| setup_lowcore(void) | |
| { | |
| struct _lowcore *lc; | |
| int lc_pages; | |
| /* | |
| * Setup lowcore for boot cpu | |
| */ | |
| lc_pages = sizeof(void *) == 8 ? 2 : 1; | |
| lc = (struct _lowcore *) | |
| __alloc_bootmem(lc_pages * PAGE_SIZE, lc_pages * PAGE_SIZE, 0); | |
| memset(lc, 0, lc_pages * PAGE_SIZE); | |
| lc->restart_psw.mask = PSW_BASE_BITS | PSW_DEFAULT_KEY; | |
| lc->restart_psw.addr = | |
| PSW_ADDR_AMODE | (unsigned long) restart_int_handler; | |
| if (switch_amode) | |
| lc->restart_psw.mask |= PSW_ASC_HOME; | |
| lc->external_new_psw.mask = psw_kernel_bits; | |
| lc->external_new_psw.addr = | |
| PSW_ADDR_AMODE | (unsigned long) ext_int_handler; | |
| lc->svc_new_psw.mask = psw_kernel_bits | PSW_MASK_IO | PSW_MASK_EXT; | |
| lc->svc_new_psw.addr = PSW_ADDR_AMODE | (unsigned long) system_call; | |
| lc->program_new_psw.mask = psw_kernel_bits; | |
| lc->program_new_psw.addr = | |
| PSW_ADDR_AMODE | (unsigned long)pgm_check_handler; | |
| lc->mcck_new_psw.mask = | |
| psw_kernel_bits & ~PSW_MASK_MCHECK & ~PSW_MASK_DAT; | |
| lc->mcck_new_psw.addr = | |
| PSW_ADDR_AMODE | (unsigned long) mcck_int_handler; | |
| lc->io_new_psw.mask = psw_kernel_bits; | |
| lc->io_new_psw.addr = PSW_ADDR_AMODE | (unsigned long) io_int_handler; | |
| lc->ipl_device = S390_lowcore.ipl_device; | |
| lc->clock_comparator = -1ULL; | |
| lc->kernel_stack = ((unsigned long) &init_thread_union) + THREAD_SIZE; | |
| lc->async_stack = (unsigned long) | |
| __alloc_bootmem(ASYNC_SIZE, ASYNC_SIZE, 0) + ASYNC_SIZE; | |
| lc->panic_stack = (unsigned long) | |
| __alloc_bootmem(PAGE_SIZE, PAGE_SIZE, 0) + PAGE_SIZE; | |
| lc->current_task = (unsigned long) init_thread_union.thread_info.task; | |
| lc->thread_info = (unsigned long) &init_thread_union; | |
| #ifndef CONFIG_64BIT | |
| if (MACHINE_HAS_IEEE) { | |
| lc->extended_save_area_addr = (__u32) | |
| __alloc_bootmem(PAGE_SIZE, PAGE_SIZE, 0); | |
| /* enable extended save area */ | |
| __ctl_set_bit(14, 29); | |
| } | |
| #endif | |
| set_prefix((u32)(unsigned long) lc); | |
| } | |
| static void __init | |
| setup_resources(void) | |
| { | |
| struct resource *res, *sub_res; | |
| int i; | |
| code_resource.start = (unsigned long) &_text; | |
| code_resource.end = (unsigned long) &_etext - 1; | |
| data_resource.start = (unsigned long) &_etext; | |
| data_resource.end = (unsigned long) &_edata - 1; | |
| for (i = 0; i < MEMORY_CHUNKS; i++) { | |
| if (!memory_chunk[i].size) | |
| continue; | |
| res = alloc_bootmem_low(sizeof(struct resource)); | |
| res->flags = IORESOURCE_BUSY | IORESOURCE_MEM; | |
| switch (memory_chunk[i].type) { | |
| case CHUNK_READ_WRITE: | |
| res->name = "System RAM"; | |
| break; | |
| case CHUNK_READ_ONLY: | |
| res->name = "System ROM"; | |
| res->flags |= IORESOURCE_READONLY; | |
| break; | |
| default: | |
| res->name = "reserved"; | |
| } | |
| res->start = memory_chunk[i].addr; | |
| res->end = memory_chunk[i].addr + memory_chunk[i].size - 1; | |
| request_resource(&iomem_resource, res); | |
| if (code_resource.start >= res->start && | |
| code_resource.start <= res->end && | |
| code_resource.end > res->end) { | |
| sub_res = alloc_bootmem_low(sizeof(struct resource)); | |
| memcpy(sub_res, &code_resource, | |
| sizeof(struct resource)); | |
| sub_res->end = res->end; | |
| code_resource.start = res->end + 1; | |
| request_resource(res, sub_res); | |
| } | |
| if (code_resource.start >= res->start && | |
| code_resource.start <= res->end && | |
| code_resource.end <= res->end) | |
| request_resource(res, &code_resource); | |
| if (data_resource.start >= res->start && | |
| data_resource.start <= res->end && | |
| data_resource.end > res->end) { | |
| sub_res = alloc_bootmem_low(sizeof(struct resource)); | |
| memcpy(sub_res, &data_resource, | |
| sizeof(struct resource)); | |
| sub_res->end = res->end; | |
| data_resource.start = res->end + 1; | |
| request_resource(res, sub_res); | |
| } | |
| if (data_resource.start >= res->start && | |
| data_resource.start <= res->end && | |
| data_resource.end <= res->end) | |
| request_resource(res, &data_resource); | |
| } | |
| } | |
| unsigned long real_memory_size; | |
| EXPORT_SYMBOL_GPL(real_memory_size); | |
| static void __init setup_memory_end(void) | |
| { | |
| unsigned long memory_size; | |
| unsigned long max_mem; | |
| int i; | |
| #if defined(CONFIG_ZFCPDUMP) || defined(CONFIG_ZFCPDUMP_MODULE) | |
| if (ipl_info.type == IPL_TYPE_FCP_DUMP) | |
| memory_end = ZFCPDUMP_HSA_SIZE; | |
| #endif | |
| memory_size = 0; | |
| memory_end &= PAGE_MASK; | |
| max_mem = memory_end ? min(VMEM_MAX_PHYS, memory_end) : VMEM_MAX_PHYS; | |
| memory_end = min(max_mem, memory_end); | |
| /* | |
| * Make sure all chunks are MAX_ORDER aligned so we don't need the | |
| * extra checks that HOLES_IN_ZONE would require. | |
| */ | |
| for (i = 0; i < MEMORY_CHUNKS; i++) { | |
| unsigned long start, end; | |
| struct mem_chunk *chunk; | |
| unsigned long align; | |
| chunk = &memory_chunk[i]; | |
| align = 1UL << (MAX_ORDER + PAGE_SHIFT - 1); | |
| start = (chunk->addr + align - 1) & ~(align - 1); | |
| end = (chunk->addr + chunk->size) & ~(align - 1); | |
| if (start >= end) | |
| memset(chunk, 0, sizeof(*chunk)); | |
| else { | |
| chunk->addr = start; | |
| chunk->size = end - start; | |
| } | |
| } | |
| for (i = 0; i < MEMORY_CHUNKS; i++) { | |
| struct mem_chunk *chunk = &memory_chunk[i]; | |
| real_memory_size = max(real_memory_size, | |
| chunk->addr + chunk->size); | |
| if (chunk->addr >= max_mem) { | |
| memset(chunk, 0, sizeof(*chunk)); | |
| continue; | |
| } | |
| if (chunk->addr + chunk->size > max_mem) | |
| chunk->size = max_mem - chunk->addr; | |
| memory_size = max(memory_size, chunk->addr + chunk->size); | |
| } | |
| if (!memory_end) | |
| memory_end = memory_size; | |
| } | |
| static void __init | |
| setup_memory(void) | |
| { | |
| unsigned long bootmap_size; | |
| unsigned long start_pfn, end_pfn; | |
| int i; | |
| /* | |
| * partially used pages are not usable - thus | |
| * we are rounding upwards: | |
| */ | |
| start_pfn = PFN_UP(__pa(&_end)); | |
| end_pfn = max_pfn = PFN_DOWN(memory_end); | |
| #ifdef CONFIG_BLK_DEV_INITRD | |
| /* | |
| * Move the initrd in case the bitmap of the bootmem allocater | |
| * would overwrite it. | |
| */ | |
| if (INITRD_START && INITRD_SIZE) { | |
| unsigned long bmap_size; | |
| unsigned long start; | |
| bmap_size = bootmem_bootmap_pages(end_pfn - start_pfn + 1); | |
| bmap_size = PFN_PHYS(bmap_size); | |
| if (PFN_PHYS(start_pfn) + bmap_size > INITRD_START) { | |
| start = PFN_PHYS(start_pfn) + bmap_size + PAGE_SIZE; | |
| if (start + INITRD_SIZE > memory_end) { | |
| printk("initrd extends beyond end of memory " | |
| "(0x%08lx > 0x%08lx)\n" | |
| "disabling initrd\n", | |
| start + INITRD_SIZE, memory_end); | |
| INITRD_START = INITRD_SIZE = 0; | |
| } else { | |
| printk("Moving initrd (0x%08lx -> 0x%08lx, " | |
| "size: %ld)\n", | |
| INITRD_START, start, INITRD_SIZE); | |
| memmove((void *) start, (void *) INITRD_START, | |
| INITRD_SIZE); | |
| INITRD_START = start; | |
| } | |
| } | |
| } | |
| #endif | |
| /* | |
| * Initialize the boot-time allocator | |
| */ | |
| bootmap_size = init_bootmem(start_pfn, end_pfn); | |
| /* | |
| * Register RAM areas with the bootmem allocator. | |
| */ | |
| for (i = 0; i < MEMORY_CHUNKS && memory_chunk[i].size > 0; i++) { | |
| unsigned long start_chunk, end_chunk, pfn; | |
| if (memory_chunk[i].type != CHUNK_READ_WRITE) | |
| continue; | |
| start_chunk = PFN_DOWN(memory_chunk[i].addr); | |
| end_chunk = start_chunk + PFN_DOWN(memory_chunk[i].size) - 1; | |
| end_chunk = min(end_chunk, end_pfn); | |
| if (start_chunk >= end_chunk) | |
| continue; | |
| add_active_range(0, start_chunk, end_chunk); | |
| pfn = max(start_chunk, start_pfn); | |
| for (; pfn <= end_chunk; pfn++) | |
| page_set_storage_key(PFN_PHYS(pfn), PAGE_DEFAULT_KEY); | |
| } | |
| psw_set_key(PAGE_DEFAULT_KEY); | |
| free_bootmem_with_active_regions(0, max_pfn); | |
| /* | |
| * Reserve memory used for lowcore/command line/kernel image. | |
| */ | |
| reserve_bootmem(0, (unsigned long)_ehead, BOOTMEM_DEFAULT); | |
| reserve_bootmem((unsigned long)_stext, | |
| PFN_PHYS(start_pfn) - (unsigned long)_stext, | |
| BOOTMEM_DEFAULT); | |
| /* | |
| * Reserve the bootmem bitmap itself as well. We do this in two | |
| * steps (first step was init_bootmem()) because this catches | |
| * the (very unlikely) case of us accidentally initializing the | |
| * bootmem allocator with an invalid RAM area. | |
| */ | |
| reserve_bootmem(start_pfn << PAGE_SHIFT, bootmap_size, | |
| BOOTMEM_DEFAULT); | |
| #ifdef CONFIG_BLK_DEV_INITRD | |
| if (INITRD_START && INITRD_SIZE) { | |
| if (INITRD_START + INITRD_SIZE <= memory_end) { | |
| reserve_bootmem(INITRD_START, INITRD_SIZE, | |
| BOOTMEM_DEFAULT); | |
| initrd_start = INITRD_START; | |
| initrd_end = initrd_start + INITRD_SIZE; | |
| } else { | |
| printk("initrd extends beyond end of memory " | |
| "(0x%08lx > 0x%08lx)\ndisabling initrd\n", | |
| initrd_start + INITRD_SIZE, memory_end); | |
| initrd_start = initrd_end = 0; | |
| } | |
| } | |
| #endif | |
| } | |
| static int __init __stfle(unsigned long long *list, int doublewords) | |
| { | |
| typedef struct { unsigned long long _[doublewords]; } addrtype; | |
| register unsigned long __nr asm("0") = doublewords - 1; | |
| asm volatile(".insn s,0xb2b00000,%0" /* stfle */ | |
| : "=m" (*(addrtype *) list), "+d" (__nr) : : "cc"); | |
| return __nr + 1; | |
| } | |
| int __init stfle(unsigned long long *list, int doublewords) | |
| { | |
| if (!(stfl() & (1UL << 24))) | |
| return -EOPNOTSUPP; | |
| return __stfle(list, doublewords); | |
| } | |
| /* | |
| * Setup hardware capabilities. | |
| */ | |
| static void __init setup_hwcaps(void) | |
| { | |
| static const int stfl_bits[6] = { 0, 2, 7, 17, 19, 21 }; | |
| struct cpuinfo_S390 *cpuinfo = &S390_lowcore.cpu_data; | |
| unsigned long long facility_list_extended; | |
| unsigned int facility_list; | |
| int i; | |
| facility_list = stfl(); | |
| /* | |
| * The store facility list bits numbers as found in the principles | |
| * of operation are numbered with bit 1UL<<31 as number 0 to | |
| * bit 1UL<<0 as number 31. | |
| * Bit 0: instructions named N3, "backported" to esa-mode | |
| * Bit 2: z/Architecture mode is active | |
| * Bit 7: the store-facility-list-extended facility is installed | |
| * Bit 17: the message-security assist is installed | |
| * Bit 19: the long-displacement facility is installed | |
| * Bit 21: the extended-immediate facility is installed | |
| * These get translated to: | |
| * HWCAP_S390_ESAN3 bit 0, HWCAP_S390_ZARCH bit 1, | |
| * HWCAP_S390_STFLE bit 2, HWCAP_S390_MSA bit 3, | |
| * HWCAP_S390_LDISP bit 4, and HWCAP_S390_EIMM bit 5. | |
| */ | |
| for (i = 0; i < 6; i++) | |
| if (facility_list & (1UL << (31 - stfl_bits[i]))) | |
| elf_hwcap |= 1UL << i; | |
| /* | |
| * Check for additional facilities with store-facility-list-extended. | |
| * stfle stores doublewords (8 byte) with bit 1ULL<<63 as bit 0 | |
| * and 1ULL<<0 as bit 63. Bits 0-31 contain the same information | |
| * as stored by stfl, bits 32-xxx contain additional facilities. | |
| * How many facility words are stored depends on the number of | |
| * doublewords passed to the instruction. The additional facilites | |
| * are: | |
| * Bit 43: decimal floating point facility is installed | |
| * translated to: | |
| * HWCAP_S390_DFP bit 6. | |
| */ | |
| if ((elf_hwcap & (1UL << 2)) && | |
| __stfle(&facility_list_extended, 1) > 0) { | |
| if (facility_list_extended & (1ULL << (64 - 43))) | |
| elf_hwcap |= 1UL << 6; | |
| } | |
| if (MACHINE_HAS_HPAGE) | |
| elf_hwcap |= 1UL << 7; | |
| switch (cpuinfo->cpu_id.machine) { | |
| case 0x9672: | |
| #if !defined(CONFIG_64BIT) | |
| default: /* Use "g5" as default for 31 bit kernels. */ | |
| #endif | |
| strcpy(elf_platform, "g5"); | |
| break; | |
| case 0x2064: | |
| case 0x2066: | |
| #if defined(CONFIG_64BIT) | |
| default: /* Use "z900" as default for 64 bit kernels. */ | |
| #endif | |
| strcpy(elf_platform, "z900"); | |
| break; | |
| case 0x2084: | |
| case 0x2086: | |
| strcpy(elf_platform, "z990"); | |
| break; | |
| case 0x2094: | |
| strcpy(elf_platform, "z9-109"); | |
| break; | |
| } | |
| } | |
| /* | |
| * Setup function called from init/main.c just after the banner | |
| * was printed. | |
| */ | |
| void __init | |
| setup_arch(char **cmdline_p) | |
| { | |
| /* | |
| * print what head.S has found out about the machine | |
| */ | |
| #ifndef CONFIG_64BIT | |
| printk((MACHINE_IS_VM) ? | |
| "We are running under VM (31 bit mode)\n" : | |
| "We are running native (31 bit mode)\n"); | |
| printk((MACHINE_HAS_IEEE) ? | |
| "This machine has an IEEE fpu\n" : | |
| "This machine has no IEEE fpu\n"); | |
| #else /* CONFIG_64BIT */ | |
| if (MACHINE_IS_VM) | |
| printk("We are running under VM (64 bit mode)\n"); | |
| else if (MACHINE_IS_KVM) { | |
| printk("We are running under KVM (64 bit mode)\n"); | |
| add_preferred_console("ttyS", 1, NULL); | |
| } else | |
| printk("We are running native (64 bit mode)\n"); | |
| #endif /* CONFIG_64BIT */ | |
| /* Save unparsed command line copy for /proc/cmdline */ | |
| strlcpy(boot_command_line, COMMAND_LINE, COMMAND_LINE_SIZE); | |
| *cmdline_p = COMMAND_LINE; | |
| *(*cmdline_p + COMMAND_LINE_SIZE - 1) = '\0'; | |
| ROOT_DEV = Root_RAM0; | |
| init_mm.start_code = PAGE_OFFSET; | |
| init_mm.end_code = (unsigned long) &_etext; | |
| init_mm.end_data = (unsigned long) &_edata; | |
| init_mm.brk = (unsigned long) &_end; | |
| if (MACHINE_HAS_MVCOS) | |
| memcpy(&uaccess, &uaccess_mvcos, sizeof(uaccess)); | |
| else | |
| memcpy(&uaccess, &uaccess_std, sizeof(uaccess)); | |
| parse_early_param(); | |
| setup_ipl(); | |
| setup_memory_end(); | |
| setup_addressing_mode(); | |
| setup_memory(); | |
| setup_resources(); | |
| setup_lowcore(); | |
| cpu_init(); | |
| __cpu_logical_map[0] = S390_lowcore.cpu_data.cpu_addr; | |
| s390_init_cpu_topology(); | |
| /* | |
| * Setup capabilities (ELF_HWCAP & ELF_PLATFORM). | |
| */ | |
| setup_hwcaps(); | |
| /* | |
| * Create kernel page tables and switch to virtual addressing. | |
| */ | |
| paging_init(); | |
| /* Setup default console */ | |
| conmode_default(); | |
| /* Setup zfcpdump support */ | |
| setup_zfcpdump(console_devno); | |
| } | |
| void __cpuinit print_cpu_info(struct cpuinfo_S390 *cpuinfo) | |
| { | |
| printk(KERN_INFO "cpu %d " | |
| #ifdef CONFIG_SMP | |
| "phys_idx=%d " | |
| #endif | |
| "vers=%02X ident=%06X machine=%04X unused=%04X\n", | |
| cpuinfo->cpu_nr, | |
| #ifdef CONFIG_SMP | |
| cpuinfo->cpu_addr, | |
| #endif | |
| cpuinfo->cpu_id.version, | |
| cpuinfo->cpu_id.ident, | |
| cpuinfo->cpu_id.machine, | |
| cpuinfo->cpu_id.unused); | |
| } | |
| /* | |
| * show_cpuinfo - Get information on one CPU for use by procfs. | |
| */ | |
| static int show_cpuinfo(struct seq_file *m, void *v) | |
| { | |
| static const char *hwcap_str[8] = { | |
| "esan3", "zarch", "stfle", "msa", "ldisp", "eimm", "dfp", | |
| "edat" | |
| }; | |
| struct cpuinfo_S390 *cpuinfo; | |
| unsigned long n = (unsigned long) v - 1; | |
| int i; | |
| s390_adjust_jiffies(); | |
| preempt_disable(); | |
| if (!n) { | |
| seq_printf(m, "vendor_id : IBM/S390\n" | |
| "# processors : %i\n" | |
| "bogomips per cpu: %lu.%02lu\n", | |
| num_online_cpus(), loops_per_jiffy/(500000/HZ), | |
| (loops_per_jiffy/(5000/HZ))%100); | |
| seq_puts(m, "features\t: "); | |
| for (i = 0; i < 8; i++) | |
| if (hwcap_str[i] && (elf_hwcap & (1UL << i))) | |
| seq_printf(m, "%s ", hwcap_str[i]); | |
| seq_puts(m, "\n"); | |
| } | |
| if (cpu_online(n)) { | |
| #ifdef CONFIG_SMP | |
| if (smp_processor_id() == n) | |
| cpuinfo = &S390_lowcore.cpu_data; | |
| else | |
| cpuinfo = &lowcore_ptr[n]->cpu_data; | |
| #else | |
| cpuinfo = &S390_lowcore.cpu_data; | |
| #endif | |
| seq_printf(m, "processor %li: " | |
| "version = %02X, " | |
| "identification = %06X, " | |
| "machine = %04X\n", | |
| n, cpuinfo->cpu_id.version, | |
| cpuinfo->cpu_id.ident, | |
| cpuinfo->cpu_id.machine); | |
| } | |
| preempt_enable(); | |
| return 0; | |
| } | |
| static void *c_start(struct seq_file *m, loff_t *pos) | |
| { | |
| return *pos < NR_CPUS ? (void *)((unsigned long) *pos + 1) : NULL; | |
| } | |
| static void *c_next(struct seq_file *m, void *v, loff_t *pos) | |
| { | |
| ++*pos; | |
| return c_start(m, pos); | |
| } | |
| static void c_stop(struct seq_file *m, void *v) | |
| { | |
| } | |
| const struct seq_operations cpuinfo_op = { | |
| .start = c_start, | |
| .next = c_next, | |
| .stop = c_stop, | |
| .show = show_cpuinfo, | |
| }; | |