| /* | |
| * Smp support for ppc. | |
| * | |
| * Written by Cort Dougan (cort@cs.nmt.edu) borrowing a great | |
| * deal of code from the sparc and intel versions. | |
| * | |
| * Copyright (C) 1999 Cort Dougan <cort@cs.nmt.edu> | |
| * | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/module.h> | |
| #include <linux/sched.h> | |
| #include <linux/smp.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/kernel_stat.h> | |
| #include <linux/delay.h> | |
| #include <linux/init.h> | |
| #include <linux/spinlock.h> | |
| #include <linux/cache.h> | |
| #include <asm/ptrace.h> | |
| #include <asm/atomic.h> | |
| #include <asm/irq.h> | |
| #include <asm/page.h> | |
| #include <asm/pgtable.h> | |
| #include <asm/io.h> | |
| #include <asm/prom.h> | |
| #include <asm/smp.h> | |
| #include <asm/residual.h> | |
| #include <asm/time.h> | |
| #include <asm/thread_info.h> | |
| #include <asm/tlbflush.h> | |
| #include <asm/xmon.h> | |
| #include <asm/machdep.h> | |
| volatile int smp_commenced; | |
| int smp_tb_synchronized; | |
| struct cpuinfo_PPC cpu_data[NR_CPUS]; | |
| atomic_t ipi_recv; | |
| atomic_t ipi_sent; | |
| cpumask_t cpu_online_map; | |
| cpumask_t cpu_possible_map; | |
| int smp_hw_index[NR_CPUS]; | |
| struct thread_info *secondary_ti; | |
| static struct task_struct *idle_tasks[NR_CPUS]; | |
| EXPORT_SYMBOL(cpu_online_map); | |
| EXPORT_SYMBOL(cpu_possible_map); | |
| /* SMP operations for this machine */ | |
| struct smp_ops_t *smp_ops; | |
| /* all cpu mappings are 1-1 -- Cort */ | |
| volatile unsigned long cpu_callin_map[NR_CPUS]; | |
| int start_secondary(void *); | |
| void smp_call_function_interrupt(void); | |
| static int __smp_call_function(void (*func) (void *info), void *info, | |
| int wait, int target); | |
| /* Low level assembly function used to backup CPU 0 state */ | |
| extern void __save_cpu_setup(void); | |
| /* Since OpenPIC has only 4 IPIs, we use slightly different message numbers. | |
| * | |
| * Make sure this matches openpic_request_IPIs in open_pic.c, or what shows up | |
| * in /proc/interrupts will be wrong!!! --Troy */ | |
| #define PPC_MSG_CALL_FUNCTION 0 | |
| #define PPC_MSG_RESCHEDULE 1 | |
| #define PPC_MSG_INVALIDATE_TLB 2 | |
| #define PPC_MSG_XMON_BREAK 3 | |
| static inline void | |
| smp_message_pass(int target, int msg) | |
| { | |
| if (smp_ops) { | |
| atomic_inc(&ipi_sent); | |
| smp_ops->message_pass(target, msg); | |
| } | |
| } | |
| /* | |
| * Common functions | |
| */ | |
| void smp_message_recv(int msg) | |
| { | |
| atomic_inc(&ipi_recv); | |
| switch( msg ) { | |
| case PPC_MSG_CALL_FUNCTION: | |
| smp_call_function_interrupt(); | |
| break; | |
| case PPC_MSG_RESCHEDULE: | |
| set_need_resched(); | |
| break; | |
| case PPC_MSG_INVALIDATE_TLB: | |
| _tlbia(); | |
| break; | |
| #ifdef CONFIG_XMON | |
| case PPC_MSG_XMON_BREAK: | |
| xmon(get_irq_regs()); | |
| break; | |
| #endif /* CONFIG_XMON */ | |
| default: | |
| printk("SMP %d: smp_message_recv(): unknown msg %d\n", | |
| smp_processor_id(), msg); | |
| break; | |
| } | |
| } | |
| /* | |
| * 750's don't broadcast tlb invalidates so | |
| * we have to emulate that behavior. | |
| * -- Cort | |
| */ | |
| void smp_send_tlb_invalidate(int cpu) | |
| { | |
| if ( PVR_VER(mfspr(SPRN_PVR)) == 8 ) | |
| smp_message_pass(MSG_ALL_BUT_SELF, PPC_MSG_INVALIDATE_TLB); | |
| } | |
| void smp_send_reschedule(int cpu) | |
| { | |
| /* | |
| * This is only used if `cpu' is running an idle task, | |
| * so it will reschedule itself anyway... | |
| * | |
| * This isn't the case anymore since the other CPU could be | |
| * sleeping and won't reschedule until the next interrupt (such | |
| * as the timer). | |
| * -- Cort | |
| */ | |
| /* This is only used if `cpu' is running an idle task, | |
| so it will reschedule itself anyway... */ | |
| smp_message_pass(cpu, PPC_MSG_RESCHEDULE); | |
| } | |
| #ifdef CONFIG_XMON | |
| void smp_send_xmon_break(int cpu) | |
| { | |
| smp_message_pass(cpu, PPC_MSG_XMON_BREAK); | |
| } | |
| #endif /* CONFIG_XMON */ | |
| static void stop_this_cpu(void *dummy) | |
| { | |
| local_irq_disable(); | |
| while (1) | |
| ; | |
| } | |
| void smp_send_stop(void) | |
| { | |
| smp_call_function(stop_this_cpu, NULL, 1, 0); | |
| } | |
| /* | |
| * Structure and data for smp_call_function(). This is designed to minimise | |
| * static memory requirements. It also looks cleaner. | |
| * Stolen from the i386 version. | |
| */ | |
| static DEFINE_SPINLOCK(call_lock); | |
| static struct call_data_struct { | |
| void (*func) (void *info); | |
| void *info; | |
| atomic_t started; | |
| atomic_t finished; | |
| int wait; | |
| } *call_data; | |
| /* | |
| * this function sends a 'generic call function' IPI to all other CPUs | |
| * in the system. | |
| */ | |
| int smp_call_function(void (*func) (void *info), void *info, int nonatomic, | |
| int wait) | |
| /* | |
| * [SUMMARY] Run a function on all other CPUs. | |
| * <func> The function to run. This must be fast and non-blocking. | |
| * <info> An arbitrary pointer to pass to the function. | |
| * <nonatomic> currently unused. | |
| * <wait> If true, wait (atomically) until function has completed on other CPUs. | |
| * [RETURNS] 0 on success, else a negative status code. Does not return until | |
| * remote CPUs are nearly ready to execute <<func>> or are or have executed. | |
| * | |
| * You must not call this function with disabled interrupts or from a | |
| * hardware interrupt handler or from a bottom half handler. | |
| */ | |
| { | |
| /* FIXME: get cpu lock with hotplug cpus, or change this to | |
| bitmask. --RR */ | |
| if (num_online_cpus() <= 1) | |
| return 0; | |
| /* Can deadlock when called with interrupts disabled */ | |
| WARN_ON(irqs_disabled()); | |
| return __smp_call_function(func, info, wait, MSG_ALL_BUT_SELF); | |
| } | |
| static int __smp_call_function(void (*func) (void *info), void *info, | |
| int wait, int target) | |
| { | |
| struct call_data_struct data; | |
| int ret = -1; | |
| int timeout; | |
| int ncpus = 1; | |
| if (target == MSG_ALL_BUT_SELF) | |
| ncpus = num_online_cpus() - 1; | |
| else if (target == MSG_ALL) | |
| ncpus = num_online_cpus(); | |
| data.func = func; | |
| data.info = info; | |
| atomic_set(&data.started, 0); | |
| data.wait = wait; | |
| if (wait) | |
| atomic_set(&data.finished, 0); | |
| spin_lock(&call_lock); | |
| call_data = &data; | |
| /* Send a message to all other CPUs and wait for them to respond */ | |
| smp_message_pass(target, PPC_MSG_CALL_FUNCTION); | |
| /* Wait for response */ | |
| timeout = 1000000; | |
| while (atomic_read(&data.started) != ncpus) { | |
| if (--timeout == 0) { | |
| printk("smp_call_function on cpu %d: other cpus not responding (%d)\n", | |
| smp_processor_id(), atomic_read(&data.started)); | |
| goto out; | |
| } | |
| barrier(); | |
| udelay(1); | |
| } | |
| if (wait) { | |
| timeout = 1000000; | |
| while (atomic_read(&data.finished) != ncpus) { | |
| if (--timeout == 0) { | |
| printk("smp_call_function on cpu %d: other cpus not finishing (%d/%d)\n", | |
| smp_processor_id(), atomic_read(&data.finished), atomic_read(&data.started)); | |
| goto out; | |
| } | |
| barrier(); | |
| udelay(1); | |
| } | |
| } | |
| ret = 0; | |
| out: | |
| spin_unlock(&call_lock); | |
| return ret; | |
| } | |
| void smp_call_function_interrupt(void) | |
| { | |
| void (*func) (void *info) = call_data->func; | |
| void *info = call_data->info; | |
| int wait = call_data->wait; | |
| /* | |
| * Notify initiating CPU that I've grabbed the data and am | |
| * about to execute the function | |
| */ | |
| atomic_inc(&call_data->started); | |
| /* | |
| * At this point the info structure may be out of scope unless wait==1 | |
| */ | |
| (*func)(info); | |
| if (wait) | |
| atomic_inc(&call_data->finished); | |
| } | |
| static void __devinit smp_store_cpu_info(int id) | |
| { | |
| struct cpuinfo_PPC *c = &cpu_data[id]; | |
| /* assume bogomips are same for everything */ | |
| c->loops_per_jiffy = loops_per_jiffy; | |
| c->pvr = mfspr(SPRN_PVR); | |
| } | |
| void __init smp_prepare_cpus(unsigned int max_cpus) | |
| { | |
| int num_cpus, i, cpu; | |
| struct task_struct *p; | |
| /* Fixup boot cpu */ | |
| smp_store_cpu_info(smp_processor_id()); | |
| cpu_callin_map[smp_processor_id()] = 1; | |
| if (smp_ops == NULL) { | |
| printk("SMP not supported on this machine.\n"); | |
| return; | |
| } | |
| /* Probe platform for CPUs: always linear. */ | |
| num_cpus = smp_ops->probe(); | |
| if (num_cpus < 2) | |
| smp_tb_synchronized = 1; | |
| for (i = 0; i < num_cpus; ++i) | |
| cpu_set(i, cpu_possible_map); | |
| /* Backup CPU 0 state */ | |
| __save_cpu_setup(); | |
| for_each_possible_cpu(cpu) { | |
| if (cpu == smp_processor_id()) | |
| continue; | |
| /* create a process for the processor */ | |
| p = fork_idle(cpu); | |
| if (IS_ERR(p)) | |
| panic("failed fork for CPU %u: %li", cpu, PTR_ERR(p)); | |
| task_thread_info(p)->cpu = cpu; | |
| idle_tasks[cpu] = p; | |
| } | |
| } | |
| void __devinit smp_prepare_boot_cpu(void) | |
| { | |
| cpu_set(smp_processor_id(), cpu_online_map); | |
| cpu_set(smp_processor_id(), cpu_possible_map); | |
| } | |
| int __init setup_profiling_timer(unsigned int multiplier) | |
| { | |
| return 0; | |
| } | |
| /* Processor coming up starts here */ | |
| int __devinit start_secondary(void *unused) | |
| { | |
| int cpu; | |
| atomic_inc(&init_mm.mm_count); | |
| current->active_mm = &init_mm; | |
| cpu = smp_processor_id(); | |
| smp_store_cpu_info(cpu); | |
| set_dec(tb_ticks_per_jiffy); | |
| preempt_disable(); | |
| cpu_callin_map[cpu] = 1; | |
| printk("CPU %d done callin...\n", cpu); | |
| smp_ops->setup_cpu(cpu); | |
| printk("CPU %d done setup...\n", cpu); | |
| smp_ops->take_timebase(); | |
| printk("CPU %d done timebase take...\n", cpu); | |
| spin_lock(&call_lock); | |
| cpu_set(cpu, cpu_online_map); | |
| spin_unlock(&call_lock); | |
| local_irq_enable(); | |
| cpu_idle(); | |
| return 0; | |
| } | |
| int __cpu_up(unsigned int cpu) | |
| { | |
| char buf[32]; | |
| int c; | |
| secondary_ti = task_thread_info(idle_tasks[cpu]); | |
| mb(); | |
| /* | |
| * There was a cache flush loop here to flush the cache | |
| * to memory for the first 8MB of RAM. The cache flush | |
| * has been pushed into the kick_cpu function for those | |
| * platforms that need it. | |
| */ | |
| /* wake up cpu */ | |
| smp_ops->kick_cpu(cpu); | |
| /* | |
| * wait to see if the cpu made a callin (is actually up). | |
| * use this value that I found through experimentation. | |
| * -- Cort | |
| */ | |
| for (c = 1000; c && !cpu_callin_map[cpu]; c--) | |
| udelay(100); | |
| if (!cpu_callin_map[cpu]) { | |
| sprintf(buf, "didn't find cpu %u", cpu); | |
| if (ppc_md.progress) ppc_md.progress(buf, 0x360+cpu); | |
| printk("Processor %u is stuck.\n", cpu); | |
| return -ENOENT; | |
| } | |
| sprintf(buf, "found cpu %u", cpu); | |
| if (ppc_md.progress) ppc_md.progress(buf, 0x350+cpu); | |
| printk("Processor %d found.\n", cpu); | |
| smp_ops->give_timebase(); | |
| /* Wait until cpu puts itself in the online map */ | |
| while (!cpu_online(cpu)) | |
| cpu_relax(); | |
| return 0; | |
| } | |
| void smp_cpus_done(unsigned int max_cpus) | |
| { | |
| smp_ops->setup_cpu(0); | |
| } |