| /* head-uc-fr401.S: FR401/3/5 uc-linux specific bits of initialisation |
| * |
| * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. |
| * Written by David Howells (dhowells@redhat.com) |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version |
| * 2 of the License, or (at your option) any later version. |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/threads.h> |
| #include <linux/linkage.h> |
| #include <asm/ptrace.h> |
| #include <asm/page.h> |
| #include <asm/spr-regs.h> |
| #include <asm/mb86943a.h> |
| #include "head.inc" |
| |
| |
| #define __400_DBR0 0xfe000e00 |
| #define __400_DBR1 0xfe000e08 |
| #define __400_DBR2 0xfe000e10 /* not on FR401 */ |
| #define __400_DBR3 0xfe000e18 /* not on FR401 */ |
| #define __400_DAM0 0xfe000f00 |
| #define __400_DAM1 0xfe000f08 |
| #define __400_DAM2 0xfe000f10 /* not on FR401 */ |
| #define __400_DAM3 0xfe000f18 /* not on FR401 */ |
| #define __400_LGCR 0xfe000010 |
| #define __400_LCR 0xfe000100 |
| #define __400_LSBR 0xfe000c00 |
| |
| __INIT |
| .balign 4 |
| |
| ############################################################################### |
| # |
| # describe the position and layout of the SDRAM controller registers |
| # |
| # ENTRY: EXIT: |
| # GR5 - cacheline size |
| # GR11 - displacement of 2nd SDRAM addr reg from GR14 |
| # GR12 - displacement of 3rd SDRAM addr reg from GR14 |
| # GR13 - displacement of 4th SDRAM addr reg from GR14 |
| # GR14 - address of 1st SDRAM addr reg |
| # GR15 - amount to shift address by to match SDRAM addr reg |
| # GR26 &__head_reference [saved] |
| # GR30 LED address [saved] |
| # CC0 - T if DBR0 is present |
| # CC1 - T if DBR1 is present |
| # CC2 - T if DBR2 is present (not FR401/FR401A) |
| # CC3 - T if DBR3 is present (not FR401/FR401A) |
| # |
| ############################################################################### |
| .globl __head_fr401_describe_sdram |
| __head_fr401_describe_sdram: |
| sethi.p %hi(__400_DBR0),gr14 |
| setlo %lo(__400_DBR0),gr14 |
| setlos.p #__400_DBR1-__400_DBR0,gr11 |
| setlos #__400_DBR2-__400_DBR0,gr12 |
| setlos.p #__400_DBR3-__400_DBR0,gr13 |
| setlos #32,gr5 ; cacheline size |
| setlos.p #0,gr15 ; amount to shift addr reg by |
| |
| # specify which DBR regs are present |
| setlos #0x00ff,gr4 |
| movgs gr4,cccr |
| movsg psr,gr3 ; check for FR401/FR401A |
| srli gr3,#25,gr3 |
| subicc gr3,#0x20>>1,gr0,icc0 |
| bnelr icc0,#1 |
| setlos #0x000f,gr4 |
| movgs gr4,cccr |
| bralr |
| |
| ############################################################################### |
| # |
| # rearrange the bus controller registers |
| # |
| # ENTRY: EXIT: |
| # GR26 &__head_reference [saved] |
| # GR30 LED address revised LED address |
| # |
| ############################################################################### |
| .globl __head_fr401_set_busctl |
| __head_fr401_set_busctl: |
| sethi.p %hi(__400_LGCR),gr4 |
| setlo %lo(__400_LGCR),gr4 |
| sethi.p %hi(__400_LSBR),gr10 |
| setlo %lo(__400_LSBR),gr10 |
| sethi.p %hi(__400_LCR),gr11 |
| setlo %lo(__400_LCR),gr11 |
| |
| # set the bus controller |
| ldi @(gr4,#0),gr5 |
| ori gr5,#0xff,gr5 ; make sure all chip-selects are enabled |
| sti gr5,@(gr4,#0) |
| |
| sethi.p %hi(__region_CS1),gr4 |
| setlo %lo(__region_CS1),gr4 |
| sethi.p %hi(__region_CS1_M),gr5 |
| setlo %lo(__region_CS1_M),gr5 |
| sethi.p %hi(__region_CS1_C),gr6 |
| setlo %lo(__region_CS1_C),gr6 |
| sti gr4,@(gr10,#1*0x08) |
| sti gr5,@(gr10,#1*0x08+0x100) |
| sti gr6,@(gr11,#1*0x08) |
| sethi.p %hi(__region_CS2),gr4 |
| setlo %lo(__region_CS2),gr4 |
| sethi.p %hi(__region_CS2_M),gr5 |
| setlo %lo(__region_CS2_M),gr5 |
| sethi.p %hi(__region_CS2_C),gr6 |
| setlo %lo(__region_CS2_C),gr6 |
| sti gr4,@(gr10,#2*0x08) |
| sti gr5,@(gr10,#2*0x08+0x100) |
| sti gr6,@(gr11,#2*0x08) |
| sethi.p %hi(__region_CS3),gr4 |
| setlo %lo(__region_CS3),gr4 |
| sethi.p %hi(__region_CS3_M),gr5 |
| setlo %lo(__region_CS3_M),gr5 |
| sethi.p %hi(__region_CS3_C),gr6 |
| setlo %lo(__region_CS3_C),gr6 |
| sti gr4,@(gr10,#3*0x08) |
| sti gr5,@(gr10,#3*0x08+0x100) |
| sti gr6,@(gr11,#3*0x08) |
| sethi.p %hi(__region_CS4),gr4 |
| setlo %lo(__region_CS4),gr4 |
| sethi.p %hi(__region_CS4_M),gr5 |
| setlo %lo(__region_CS4_M),gr5 |
| sethi.p %hi(__region_CS4_C),gr6 |
| setlo %lo(__region_CS4_C),gr6 |
| sti gr4,@(gr10,#4*0x08) |
| sti gr5,@(gr10,#4*0x08+0x100) |
| sti gr6,@(gr11,#4*0x08) |
| sethi.p %hi(__region_CS5),gr4 |
| setlo %lo(__region_CS5),gr4 |
| sethi.p %hi(__region_CS5_M),gr5 |
| setlo %lo(__region_CS5_M),gr5 |
| sethi.p %hi(__region_CS5_C),gr6 |
| setlo %lo(__region_CS5_C),gr6 |
| sti gr4,@(gr10,#5*0x08) |
| sti gr5,@(gr10,#5*0x08+0x100) |
| sti gr6,@(gr11,#5*0x08) |
| sethi.p %hi(__region_CS6),gr4 |
| setlo %lo(__region_CS6),gr4 |
| sethi.p %hi(__region_CS6_M),gr5 |
| setlo %lo(__region_CS6_M),gr5 |
| sethi.p %hi(__region_CS6_C),gr6 |
| setlo %lo(__region_CS6_C),gr6 |
| sti gr4,@(gr10,#6*0x08) |
| sti gr5,@(gr10,#6*0x08+0x100) |
| sti gr6,@(gr11,#6*0x08) |
| sethi.p %hi(__region_CS7),gr4 |
| setlo %lo(__region_CS7),gr4 |
| sethi.p %hi(__region_CS7_M),gr5 |
| setlo %lo(__region_CS7_M),gr5 |
| sethi.p %hi(__region_CS7_C),gr6 |
| setlo %lo(__region_CS7_C),gr6 |
| sti gr4,@(gr10,#7*0x08) |
| sti gr5,@(gr10,#7*0x08+0x100) |
| sti gr6,@(gr11,#7*0x08) |
| membar |
| bar |
| |
| # adjust LED bank address |
| sethi.p %hi(LED_ADDR - 0x20000000 +__region_CS2),gr30 |
| setlo %lo(LED_ADDR - 0x20000000 +__region_CS2),gr30 |
| bralr |
| |
| ############################################################################### |
| # |
| # determine the total SDRAM size |
| # |
| # ENTRY: EXIT: |
| # GR25 - SDRAM size |
| # GR26 &__head_reference [saved] |
| # GR30 LED address [saved] |
| # |
| ############################################################################### |
| .globl __head_fr401_survey_sdram |
| __head_fr401_survey_sdram: |
| sethi.p %hi(__400_DAM0),gr11 |
| setlo %lo(__400_DAM0),gr11 |
| sethi.p %hi(__400_DBR0),gr12 |
| setlo %lo(__400_DBR0),gr12 |
| |
| sethi.p %hi(0xfe000000),gr17 ; unused SDRAM DBR value |
| setlo %lo(0xfe000000),gr17 |
| setlos #0,gr25 |
| |
| ldi @(gr12,#0x00),gr4 ; DAR0 |
| subcc gr4,gr17,gr0,icc0 |
| beq icc0,#0,__head_no_DCS0 |
| ldi @(gr11,#0x00),gr6 ; DAM0: bits 31:20 match addr 31:20 |
| add gr25,gr6,gr25 |
| addi gr25,#1,gr25 |
| __head_no_DCS0: |
| |
| ldi @(gr12,#0x08),gr4 ; DAR1 |
| subcc gr4,gr17,gr0,icc0 |
| beq icc0,#0,__head_no_DCS1 |
| ldi @(gr11,#0x08),gr6 ; DAM1: bits 31:20 match addr 31:20 |
| add gr25,gr6,gr25 |
| addi gr25,#1,gr25 |
| __head_no_DCS1: |
| |
| # FR401/FR401A does not have DCS2/3 |
| movsg psr,gr3 |
| srli gr3,#25,gr3 |
| subicc gr3,#0x20>>1,gr0,icc0 |
| beq icc0,#0,__head_no_DCS3 |
| |
| ldi @(gr12,#0x10),gr4 ; DAR2 |
| subcc gr4,gr17,gr0,icc0 |
| beq icc0,#0,__head_no_DCS2 |
| ldi @(gr11,#0x10),gr6 ; DAM2: bits 31:20 match addr 31:20 |
| add gr25,gr6,gr25 |
| addi gr25,#1,gr25 |
| __head_no_DCS2: |
| |
| ldi @(gr12,#0x18),gr4 ; DAR3 |
| subcc gr4,gr17,gr0,icc0 |
| beq icc0,#0,__head_no_DCS3 |
| ldi @(gr11,#0x18),gr6 ; DAM3: bits 31:20 match addr 31:20 |
| add gr25,gr6,gr25 |
| addi gr25,#1,gr25 |
| __head_no_DCS3: |
| bralr |
| |
| ############################################################################### |
| # |
| # set the protection map with the I/DAMPR registers |
| # |
| # ENTRY: EXIT: |
| # GR25 SDRAM size [saved] |
| # GR26 &__head_reference [saved] |
| # GR30 LED address [saved] |
| # |
| ############################################################################### |
| .globl __head_fr401_set_protection |
| __head_fr401_set_protection: |
| movsg lr,gr27 |
| |
| # set the I/O region protection registers for FR401/3/5 |
| sethi.p %hi(__region_IO),gr5 |
| setlo %lo(__region_IO),gr5 |
| ori gr5,#xAMPRx_SS_512Mb|xAMPRx_S_KERNEL|xAMPRx_C|xAMPRx_V,gr5 |
| movgs gr0,iampr7 |
| movgs gr5,dampr7 ; General I/O tile |
| |
| # need to tile the remaining IAMPR/DAMPR registers to cover as much of the RAM as possible |
| # - start with the highest numbered registers |
| sethi.p %hi(__kernel_image_end),gr8 |
| setlo %lo(__kernel_image_end),gr8 |
| sethi.p %hi(32768),gr4 ; allow for a maximal allocator bitmap |
| setlo %lo(32768),gr4 |
| add gr8,gr4,gr8 |
| sethi.p %hi(1024*2048-1),gr4 ; round up to nearest 2MiB |
| setlo %lo(1024*2048-1),gr4 |
| add.p gr8,gr4,gr8 |
| not gr4,gr4 |
| and gr8,gr4,gr8 |
| |
| sethi.p %hi(__page_offset),gr9 |
| setlo %lo(__page_offset),gr9 |
| add gr9,gr25,gr9 |
| |
| # GR8 = base of uncovered RAM |
| # GR9 = top of uncovered RAM |
| |
| #ifdef CONFIG_MB93093_PDK |
| sethi.p %hi(__region_CS2),gr4 |
| setlo %lo(__region_CS2),gr4 |
| ori gr4,#xAMPRx_SS_1Mb|xAMPRx_S_KERNEL|xAMPRx_C|xAMPRx_V,gr4 |
| movgs gr4,dampr6 |
| movgs gr0,iampr6 |
| #else |
| call __head_split_region |
| movgs gr4,iampr6 |
| movgs gr5,dampr6 |
| #endif |
| call __head_split_region |
| movgs gr4,iampr5 |
| movgs gr5,dampr5 |
| call __head_split_region |
| movgs gr4,iampr4 |
| movgs gr5,dampr4 |
| call __head_split_region |
| movgs gr4,iampr3 |
| movgs gr5,dampr3 |
| call __head_split_region |
| movgs gr4,iampr2 |
| movgs gr5,dampr2 |
| call __head_split_region |
| movgs gr4,iampr1 |
| movgs gr5,dampr1 |
| |
| # cover kernel core image with kernel-only segment |
| sethi.p %hi(__page_offset),gr8 |
| setlo %lo(__page_offset),gr8 |
| call __head_split_region |
| |
| #ifdef CONFIG_PROTECT_KERNEL |
| ori.p gr4,#xAMPRx_S_KERNEL,gr4 |
| ori gr5,#xAMPRx_S_KERNEL,gr5 |
| #endif |
| |
| movgs gr4,iampr0 |
| movgs gr5,dampr0 |
| jmpl @(gr27,gr0) |
