|  | /* | 
|  | *  linux/arch/arm/mach-omap1/clock.c | 
|  | * | 
|  | *  Copyright (C) 2004 - 2005, 2009-2010 Nokia Corporation | 
|  | *  Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com> | 
|  | * | 
|  | *  Modified to use omap shared clock framework by | 
|  | *  Tony Lindgren <tony@atomide.com> | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License version 2 as | 
|  | * published by the Free Software Foundation. | 
|  | */ | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/export.h> | 
|  | #include <linux/list.h> | 
|  | #include <linux/errno.h> | 
|  | #include <linux/err.h> | 
|  | #include <linux/io.h> | 
|  | #include <linux/clk.h> | 
|  | #include <linux/clkdev.h> | 
|  |  | 
|  | #include <asm/mach-types.h> | 
|  |  | 
|  | #include <mach/hardware.h> | 
|  |  | 
|  | #include "soc.h" | 
|  | #include "iomap.h" | 
|  | #include "clock.h" | 
|  | #include "opp.h" | 
|  | #include "sram.h" | 
|  |  | 
|  | __u32 arm_idlect1_mask; | 
|  | struct clk *api_ck_p, *ck_dpll1_p, *ck_ref_p; | 
|  |  | 
|  | static LIST_HEAD(clocks); | 
|  | static DEFINE_MUTEX(clocks_mutex); | 
|  | static DEFINE_SPINLOCK(clockfw_lock); | 
|  |  | 
|  | /* | 
|  | * Omap1 specific clock functions | 
|  | */ | 
|  |  | 
|  | unsigned long omap1_uart_recalc(struct clk *clk) | 
|  | { | 
|  | unsigned int val = __raw_readl(clk->enable_reg); | 
|  | return val & clk->enable_bit ? 48000000 : 12000000; | 
|  | } | 
|  |  | 
|  | unsigned long omap1_sossi_recalc(struct clk *clk) | 
|  | { | 
|  | u32 div = omap_readl(MOD_CONF_CTRL_1); | 
|  |  | 
|  | div = (div >> 17) & 0x7; | 
|  | div++; | 
|  |  | 
|  | return clk->parent->rate / div; | 
|  | } | 
|  |  | 
|  | static void omap1_clk_allow_idle(struct clk *clk) | 
|  | { | 
|  | struct arm_idlect1_clk * iclk = (struct arm_idlect1_clk *)clk; | 
|  |  | 
|  | if (!(clk->flags & CLOCK_IDLE_CONTROL)) | 
|  | return; | 
|  |  | 
|  | if (iclk->no_idle_count > 0 && !(--iclk->no_idle_count)) | 
|  | arm_idlect1_mask |= 1 << iclk->idlect_shift; | 
|  | } | 
|  |  | 
|  | static void omap1_clk_deny_idle(struct clk *clk) | 
|  | { | 
|  | struct arm_idlect1_clk * iclk = (struct arm_idlect1_clk *)clk; | 
|  |  | 
|  | if (!(clk->flags & CLOCK_IDLE_CONTROL)) | 
|  | return; | 
|  |  | 
|  | if (iclk->no_idle_count++ == 0) | 
|  | arm_idlect1_mask &= ~(1 << iclk->idlect_shift); | 
|  | } | 
|  |  | 
|  | static __u16 verify_ckctl_value(__u16 newval) | 
|  | { | 
|  | /* This function checks for following limitations set | 
|  | * by the hardware (all conditions must be true): | 
|  | * DSPMMU_CK == DSP_CK  or  DSPMMU_CK == DSP_CK/2 | 
|  | * ARM_CK >= TC_CK | 
|  | * DSP_CK >= TC_CK | 
|  | * DSPMMU_CK >= TC_CK | 
|  | * | 
|  | * In addition following rules are enforced: | 
|  | * LCD_CK <= TC_CK | 
|  | * ARMPER_CK <= TC_CK | 
|  | * | 
|  | * However, maximum frequencies are not checked for! | 
|  | */ | 
|  | __u8 per_exp; | 
|  | __u8 lcd_exp; | 
|  | __u8 arm_exp; | 
|  | __u8 dsp_exp; | 
|  | __u8 tc_exp; | 
|  | __u8 dspmmu_exp; | 
|  |  | 
|  | per_exp = (newval >> CKCTL_PERDIV_OFFSET) & 3; | 
|  | lcd_exp = (newval >> CKCTL_LCDDIV_OFFSET) & 3; | 
|  | arm_exp = (newval >> CKCTL_ARMDIV_OFFSET) & 3; | 
|  | dsp_exp = (newval >> CKCTL_DSPDIV_OFFSET) & 3; | 
|  | tc_exp = (newval >> CKCTL_TCDIV_OFFSET) & 3; | 
|  | dspmmu_exp = (newval >> CKCTL_DSPMMUDIV_OFFSET) & 3; | 
|  |  | 
|  | if (dspmmu_exp < dsp_exp) | 
|  | dspmmu_exp = dsp_exp; | 
|  | if (dspmmu_exp > dsp_exp+1) | 
|  | dspmmu_exp = dsp_exp+1; | 
|  | if (tc_exp < arm_exp) | 
|  | tc_exp = arm_exp; | 
|  | if (tc_exp < dspmmu_exp) | 
|  | tc_exp = dspmmu_exp; | 
|  | if (tc_exp > lcd_exp) | 
|  | lcd_exp = tc_exp; | 
|  | if (tc_exp > per_exp) | 
|  | per_exp = tc_exp; | 
|  |  | 
|  | newval &= 0xf000; | 
|  | newval |= per_exp << CKCTL_PERDIV_OFFSET; | 
|  | newval |= lcd_exp << CKCTL_LCDDIV_OFFSET; | 
|  | newval |= arm_exp << CKCTL_ARMDIV_OFFSET; | 
|  | newval |= dsp_exp << CKCTL_DSPDIV_OFFSET; | 
|  | newval |= tc_exp << CKCTL_TCDIV_OFFSET; | 
|  | newval |= dspmmu_exp << CKCTL_DSPMMUDIV_OFFSET; | 
|  |  | 
|  | return newval; | 
|  | } | 
|  |  | 
|  | static int calc_dsor_exp(struct clk *clk, unsigned long rate) | 
|  | { | 
|  | /* Note: If target frequency is too low, this function will return 4, | 
|  | * which is invalid value. Caller must check for this value and act | 
|  | * accordingly. | 
|  | * | 
|  | * Note: This function does not check for following limitations set | 
|  | * by the hardware (all conditions must be true): | 
|  | * DSPMMU_CK == DSP_CK  or  DSPMMU_CK == DSP_CK/2 | 
|  | * ARM_CK >= TC_CK | 
|  | * DSP_CK >= TC_CK | 
|  | * DSPMMU_CK >= TC_CK | 
|  | */ | 
|  | unsigned long realrate; | 
|  | struct clk * parent; | 
|  | unsigned  dsor_exp; | 
|  |  | 
|  | parent = clk->parent; | 
|  | if (unlikely(parent == NULL)) | 
|  | return -EIO; | 
|  |  | 
|  | realrate = parent->rate; | 
|  | for (dsor_exp=0; dsor_exp<4; dsor_exp++) { | 
|  | if (realrate <= rate) | 
|  | break; | 
|  |  | 
|  | realrate /= 2; | 
|  | } | 
|  |  | 
|  | return dsor_exp; | 
|  | } | 
|  |  | 
|  | unsigned long omap1_ckctl_recalc(struct clk *clk) | 
|  | { | 
|  | /* Calculate divisor encoded as 2-bit exponent */ | 
|  | int dsor = 1 << (3 & (omap_readw(ARM_CKCTL) >> clk->rate_offset)); | 
|  |  | 
|  | return clk->parent->rate / dsor; | 
|  | } | 
|  |  | 
|  | unsigned long omap1_ckctl_recalc_dsp_domain(struct clk *clk) | 
|  | { | 
|  | int dsor; | 
|  |  | 
|  | /* Calculate divisor encoded as 2-bit exponent | 
|  | * | 
|  | * The clock control bits are in DSP domain, | 
|  | * so api_ck is needed for access. | 
|  | * Note that DSP_CKCTL virt addr = phys addr, so | 
|  | * we must use __raw_readw() instead of omap_readw(). | 
|  | */ | 
|  | omap1_clk_enable(api_ck_p); | 
|  | dsor = 1 << (3 & (__raw_readw(DSP_CKCTL) >> clk->rate_offset)); | 
|  | omap1_clk_disable(api_ck_p); | 
|  |  | 
|  | return clk->parent->rate / dsor; | 
|  | } | 
|  |  | 
|  | /* MPU virtual clock functions */ | 
|  | int omap1_select_table_rate(struct clk *clk, unsigned long rate) | 
|  | { | 
|  | /* Find the highest supported frequency <= rate and switch to it */ | 
|  | struct mpu_rate * ptr; | 
|  | unsigned long ref_rate; | 
|  |  | 
|  | ref_rate = ck_ref_p->rate; | 
|  |  | 
|  | for (ptr = omap1_rate_table; ptr->rate; ptr++) { | 
|  | if (!(ptr->flags & cpu_mask)) | 
|  | continue; | 
|  |  | 
|  | if (ptr->xtal != ref_rate) | 
|  | continue; | 
|  |  | 
|  | /* Can check only after xtal frequency check */ | 
|  | if (ptr->rate <= rate) | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (!ptr->rate) | 
|  | return -EINVAL; | 
|  |  | 
|  | /* | 
|  | * In most cases we should not need to reprogram DPLL. | 
|  | * Reprogramming the DPLL is tricky, it must be done from SRAM. | 
|  | */ | 
|  | omap_sram_reprogram_clock(ptr->dpllctl_val, ptr->ckctl_val); | 
|  |  | 
|  | /* XXX Do we need to recalculate the tree below DPLL1 at this point? */ | 
|  | ck_dpll1_p->rate = ptr->pll_rate; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int omap1_clk_set_rate_dsp_domain(struct clk *clk, unsigned long rate) | 
|  | { | 
|  | int dsor_exp; | 
|  | u16 regval; | 
|  |  | 
|  | dsor_exp = calc_dsor_exp(clk, rate); | 
|  | if (dsor_exp > 3) | 
|  | dsor_exp = -EINVAL; | 
|  | if (dsor_exp < 0) | 
|  | return dsor_exp; | 
|  |  | 
|  | regval = __raw_readw(DSP_CKCTL); | 
|  | regval &= ~(3 << clk->rate_offset); | 
|  | regval |= dsor_exp << clk->rate_offset; | 
|  | __raw_writew(regval, DSP_CKCTL); | 
|  | clk->rate = clk->parent->rate / (1 << dsor_exp); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | long omap1_clk_round_rate_ckctl_arm(struct clk *clk, unsigned long rate) | 
|  | { | 
|  | int dsor_exp = calc_dsor_exp(clk, rate); | 
|  | if (dsor_exp < 0) | 
|  | return dsor_exp; | 
|  | if (dsor_exp > 3) | 
|  | dsor_exp = 3; | 
|  | return clk->parent->rate / (1 << dsor_exp); | 
|  | } | 
|  |  | 
|  | int omap1_clk_set_rate_ckctl_arm(struct clk *clk, unsigned long rate) | 
|  | { | 
|  | int dsor_exp; | 
|  | u16 regval; | 
|  |  | 
|  | dsor_exp = calc_dsor_exp(clk, rate); | 
|  | if (dsor_exp > 3) | 
|  | dsor_exp = -EINVAL; | 
|  | if (dsor_exp < 0) | 
|  | return dsor_exp; | 
|  |  | 
|  | regval = omap_readw(ARM_CKCTL); | 
|  | regval &= ~(3 << clk->rate_offset); | 
|  | regval |= dsor_exp << clk->rate_offset; | 
|  | regval = verify_ckctl_value(regval); | 
|  | omap_writew(regval, ARM_CKCTL); | 
|  | clk->rate = clk->parent->rate / (1 << dsor_exp); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | long omap1_round_to_table_rate(struct clk *clk, unsigned long rate) | 
|  | { | 
|  | /* Find the highest supported frequency <= rate */ | 
|  | struct mpu_rate * ptr; | 
|  | long highest_rate; | 
|  | unsigned long ref_rate; | 
|  |  | 
|  | ref_rate = ck_ref_p->rate; | 
|  |  | 
|  | highest_rate = -EINVAL; | 
|  |  | 
|  | for (ptr = omap1_rate_table; ptr->rate; ptr++) { | 
|  | if (!(ptr->flags & cpu_mask)) | 
|  | continue; | 
|  |  | 
|  | if (ptr->xtal != ref_rate) | 
|  | continue; | 
|  |  | 
|  | highest_rate = ptr->rate; | 
|  |  | 
|  | /* Can check only after xtal frequency check */ | 
|  | if (ptr->rate <= rate) | 
|  | break; | 
|  | } | 
|  |  | 
|  | return highest_rate; | 
|  | } | 
|  |  | 
|  | static unsigned calc_ext_dsor(unsigned long rate) | 
|  | { | 
|  | unsigned dsor; | 
|  |  | 
|  | /* MCLK and BCLK divisor selection is not linear: | 
|  | * freq = 96MHz / dsor | 
|  | * | 
|  | * RATIO_SEL range: dsor <-> RATIO_SEL | 
|  | * 0..6: (RATIO_SEL+2) <-> (dsor-2) | 
|  | * 6..48:  (8+(RATIO_SEL-6)*2) <-> ((dsor-8)/2+6) | 
|  | * Minimum dsor is 2 and maximum is 96. Odd divisors starting from 9 | 
|  | * can not be used. | 
|  | */ | 
|  | for (dsor = 2; dsor < 96; ++dsor) { | 
|  | if ((dsor & 1) && dsor > 8) | 
|  | continue; | 
|  | if (rate >= 96000000 / dsor) | 
|  | break; | 
|  | } | 
|  | return dsor; | 
|  | } | 
|  |  | 
|  | /* XXX Only needed on 1510 */ | 
|  | int omap1_set_uart_rate(struct clk *clk, unsigned long rate) | 
|  | { | 
|  | unsigned int val; | 
|  |  | 
|  | val = __raw_readl(clk->enable_reg); | 
|  | if (rate == 12000000) | 
|  | val &= ~(1 << clk->enable_bit); | 
|  | else if (rate == 48000000) | 
|  | val |= (1 << clk->enable_bit); | 
|  | else | 
|  | return -EINVAL; | 
|  | __raw_writel(val, clk->enable_reg); | 
|  | clk->rate = rate; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* External clock (MCLK & BCLK) functions */ | 
|  | int omap1_set_ext_clk_rate(struct clk *clk, unsigned long rate) | 
|  | { | 
|  | unsigned dsor; | 
|  | __u16 ratio_bits; | 
|  |  | 
|  | dsor = calc_ext_dsor(rate); | 
|  | clk->rate = 96000000 / dsor; | 
|  | if (dsor > 8) | 
|  | ratio_bits = ((dsor - 8) / 2 + 6) << 2; | 
|  | else | 
|  | ratio_bits = (dsor - 2) << 2; | 
|  |  | 
|  | ratio_bits |= __raw_readw(clk->enable_reg) & ~0xfd; | 
|  | __raw_writew(ratio_bits, clk->enable_reg); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int omap1_set_sossi_rate(struct clk *clk, unsigned long rate) | 
|  | { | 
|  | u32 l; | 
|  | int div; | 
|  | unsigned long p_rate; | 
|  |  | 
|  | p_rate = clk->parent->rate; | 
|  | /* Round towards slower frequency */ | 
|  | div = (p_rate + rate - 1) / rate; | 
|  | div--; | 
|  | if (div < 0 || div > 7) | 
|  | return -EINVAL; | 
|  |  | 
|  | l = omap_readl(MOD_CONF_CTRL_1); | 
|  | l &= ~(7 << 17); | 
|  | l |= div << 17; | 
|  | omap_writel(l, MOD_CONF_CTRL_1); | 
|  |  | 
|  | clk->rate = p_rate / (div + 1); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | long omap1_round_ext_clk_rate(struct clk *clk, unsigned long rate) | 
|  | { | 
|  | return 96000000 / calc_ext_dsor(rate); | 
|  | } | 
|  |  | 
|  | void omap1_init_ext_clk(struct clk *clk) | 
|  | { | 
|  | unsigned dsor; | 
|  | __u16 ratio_bits; | 
|  |  | 
|  | /* Determine current rate and ensure clock is based on 96MHz APLL */ | 
|  | ratio_bits = __raw_readw(clk->enable_reg) & ~1; | 
|  | __raw_writew(ratio_bits, clk->enable_reg); | 
|  |  | 
|  | ratio_bits = (ratio_bits & 0xfc) >> 2; | 
|  | if (ratio_bits > 6) | 
|  | dsor = (ratio_bits - 6) * 2 + 8; | 
|  | else | 
|  | dsor = ratio_bits + 2; | 
|  |  | 
|  | clk-> rate = 96000000 / dsor; | 
|  | } | 
|  |  | 
|  | int omap1_clk_enable(struct clk *clk) | 
|  | { | 
|  | int ret = 0; | 
|  |  | 
|  | if (clk->usecount++ == 0) { | 
|  | if (clk->parent) { | 
|  | ret = omap1_clk_enable(clk->parent); | 
|  | if (ret) | 
|  | goto err; | 
|  |  | 
|  | if (clk->flags & CLOCK_NO_IDLE_PARENT) | 
|  | omap1_clk_deny_idle(clk->parent); | 
|  | } | 
|  |  | 
|  | ret = clk->ops->enable(clk); | 
|  | if (ret) { | 
|  | if (clk->parent) | 
|  | omap1_clk_disable(clk->parent); | 
|  | goto err; | 
|  | } | 
|  | } | 
|  | return ret; | 
|  |  | 
|  | err: | 
|  | clk->usecount--; | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | void omap1_clk_disable(struct clk *clk) | 
|  | { | 
|  | if (clk->usecount > 0 && !(--clk->usecount)) { | 
|  | clk->ops->disable(clk); | 
|  | if (likely(clk->parent)) { | 
|  | omap1_clk_disable(clk->parent); | 
|  | if (clk->flags & CLOCK_NO_IDLE_PARENT) | 
|  | omap1_clk_allow_idle(clk->parent); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | static int omap1_clk_enable_generic(struct clk *clk) | 
|  | { | 
|  | __u16 regval16; | 
|  | __u32 regval32; | 
|  |  | 
|  | if (unlikely(clk->enable_reg == NULL)) { | 
|  | printk(KERN_ERR "clock.c: Enable for %s without enable code\n", | 
|  | clk->name); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | if (clk->flags & ENABLE_REG_32BIT) { | 
|  | regval32 = __raw_readl(clk->enable_reg); | 
|  | regval32 |= (1 << clk->enable_bit); | 
|  | __raw_writel(regval32, clk->enable_reg); | 
|  | } else { | 
|  | regval16 = __raw_readw(clk->enable_reg); | 
|  | regval16 |= (1 << clk->enable_bit); | 
|  | __raw_writew(regval16, clk->enable_reg); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void omap1_clk_disable_generic(struct clk *clk) | 
|  | { | 
|  | __u16 regval16; | 
|  | __u32 regval32; | 
|  |  | 
|  | if (clk->enable_reg == NULL) | 
|  | return; | 
|  |  | 
|  | if (clk->flags & ENABLE_REG_32BIT) { | 
|  | regval32 = __raw_readl(clk->enable_reg); | 
|  | regval32 &= ~(1 << clk->enable_bit); | 
|  | __raw_writel(regval32, clk->enable_reg); | 
|  | } else { | 
|  | regval16 = __raw_readw(clk->enable_reg); | 
|  | regval16 &= ~(1 << clk->enable_bit); | 
|  | __raw_writew(regval16, clk->enable_reg); | 
|  | } | 
|  | } | 
|  |  | 
|  | const struct clkops clkops_generic = { | 
|  | .enable		= omap1_clk_enable_generic, | 
|  | .disable	= omap1_clk_disable_generic, | 
|  | }; | 
|  |  | 
|  | static int omap1_clk_enable_dsp_domain(struct clk *clk) | 
|  | { | 
|  | int retval; | 
|  |  | 
|  | retval = omap1_clk_enable(api_ck_p); | 
|  | if (!retval) { | 
|  | retval = omap1_clk_enable_generic(clk); | 
|  | omap1_clk_disable(api_ck_p); | 
|  | } | 
|  |  | 
|  | return retval; | 
|  | } | 
|  |  | 
|  | static void omap1_clk_disable_dsp_domain(struct clk *clk) | 
|  | { | 
|  | if (omap1_clk_enable(api_ck_p) == 0) { | 
|  | omap1_clk_disable_generic(clk); | 
|  | omap1_clk_disable(api_ck_p); | 
|  | } | 
|  | } | 
|  |  | 
|  | const struct clkops clkops_dspck = { | 
|  | .enable		= omap1_clk_enable_dsp_domain, | 
|  | .disable	= omap1_clk_disable_dsp_domain, | 
|  | }; | 
|  |  | 
|  | /* XXX SYSC register handling does not belong in the clock framework */ | 
|  | static int omap1_clk_enable_uart_functional_16xx(struct clk *clk) | 
|  | { | 
|  | int ret; | 
|  | struct uart_clk *uclk; | 
|  |  | 
|  | ret = omap1_clk_enable_generic(clk); | 
|  | if (ret == 0) { | 
|  | /* Set smart idle acknowledgement mode */ | 
|  | uclk = (struct uart_clk *)clk; | 
|  | omap_writeb((omap_readb(uclk->sysc_addr) & ~0x10) | 8, | 
|  | uclk->sysc_addr); | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* XXX SYSC register handling does not belong in the clock framework */ | 
|  | static void omap1_clk_disable_uart_functional_16xx(struct clk *clk) | 
|  | { | 
|  | struct uart_clk *uclk; | 
|  |  | 
|  | /* Set force idle acknowledgement mode */ | 
|  | uclk = (struct uart_clk *)clk; | 
|  | omap_writeb((omap_readb(uclk->sysc_addr) & ~0x18), uclk->sysc_addr); | 
|  |  | 
|  | omap1_clk_disable_generic(clk); | 
|  | } | 
|  |  | 
|  | /* XXX SYSC register handling does not belong in the clock framework */ | 
|  | const struct clkops clkops_uart_16xx = { | 
|  | .enable		= omap1_clk_enable_uart_functional_16xx, | 
|  | .disable	= omap1_clk_disable_uart_functional_16xx, | 
|  | }; | 
|  |  | 
|  | long omap1_clk_round_rate(struct clk *clk, unsigned long rate) | 
|  | { | 
|  | if (clk->round_rate != NULL) | 
|  | return clk->round_rate(clk, rate); | 
|  |  | 
|  | return clk->rate; | 
|  | } | 
|  |  | 
|  | int omap1_clk_set_rate(struct clk *clk, unsigned long rate) | 
|  | { | 
|  | int  ret = -EINVAL; | 
|  |  | 
|  | if (clk->set_rate) | 
|  | ret = clk->set_rate(clk, rate); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Omap1 clock reset and init functions | 
|  | */ | 
|  |  | 
|  | #ifdef CONFIG_OMAP_RESET_CLOCKS | 
|  |  | 
|  | void omap1_clk_disable_unused(struct clk *clk) | 
|  | { | 
|  | __u32 regval32; | 
|  |  | 
|  | /* Clocks in the DSP domain need api_ck. Just assume bootloader | 
|  | * has not enabled any DSP clocks */ | 
|  | if (clk->enable_reg == DSP_IDLECT2) { | 
|  | pr_info("Skipping reset check for DSP domain clock \"%s\"\n", | 
|  | clk->name); | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* Is the clock already disabled? */ | 
|  | if (clk->flags & ENABLE_REG_32BIT) | 
|  | regval32 = __raw_readl(clk->enable_reg); | 
|  | else | 
|  | regval32 = __raw_readw(clk->enable_reg); | 
|  |  | 
|  | if ((regval32 & (1 << clk->enable_bit)) == 0) | 
|  | return; | 
|  |  | 
|  | printk(KERN_INFO "Disabling unused clock \"%s\"... ", clk->name); | 
|  | clk->ops->disable(clk); | 
|  | printk(" done\n"); | 
|  | } | 
|  |  | 
|  | #endif | 
|  |  | 
|  |  | 
|  | int clk_enable(struct clk *clk) | 
|  | { | 
|  | unsigned long flags; | 
|  | int ret; | 
|  |  | 
|  | if (clk == NULL || IS_ERR(clk)) | 
|  | return -EINVAL; | 
|  |  | 
|  | spin_lock_irqsave(&clockfw_lock, flags); | 
|  | ret = omap1_clk_enable(clk); | 
|  | spin_unlock_irqrestore(&clockfw_lock, flags); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  | EXPORT_SYMBOL(clk_enable); | 
|  |  | 
|  | void clk_disable(struct clk *clk) | 
|  | { | 
|  | unsigned long flags; | 
|  |  | 
|  | if (clk == NULL || IS_ERR(clk)) | 
|  | return; | 
|  |  | 
|  | spin_lock_irqsave(&clockfw_lock, flags); | 
|  | if (clk->usecount == 0) { | 
|  | pr_err("Trying disable clock %s with 0 usecount\n", | 
|  | clk->name); | 
|  | WARN_ON(1); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | omap1_clk_disable(clk); | 
|  |  | 
|  | out: | 
|  | spin_unlock_irqrestore(&clockfw_lock, flags); | 
|  | } | 
|  | EXPORT_SYMBOL(clk_disable); | 
|  |  | 
|  | unsigned long clk_get_rate(struct clk *clk) | 
|  | { | 
|  | unsigned long flags; | 
|  | unsigned long ret; | 
|  |  | 
|  | if (clk == NULL || IS_ERR(clk)) | 
|  | return 0; | 
|  |  | 
|  | spin_lock_irqsave(&clockfw_lock, flags); | 
|  | ret = clk->rate; | 
|  | spin_unlock_irqrestore(&clockfw_lock, flags); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  | EXPORT_SYMBOL(clk_get_rate); | 
|  |  | 
|  | /* | 
|  | * Optional clock functions defined in include/linux/clk.h | 
|  | */ | 
|  |  | 
|  | long clk_round_rate(struct clk *clk, unsigned long rate) | 
|  | { | 
|  | unsigned long flags; | 
|  | long ret; | 
|  |  | 
|  | if (clk == NULL || IS_ERR(clk)) | 
|  | return 0; | 
|  |  | 
|  | spin_lock_irqsave(&clockfw_lock, flags); | 
|  | ret = omap1_clk_round_rate(clk, rate); | 
|  | spin_unlock_irqrestore(&clockfw_lock, flags); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  | EXPORT_SYMBOL(clk_round_rate); | 
|  |  | 
|  | int clk_set_rate(struct clk *clk, unsigned long rate) | 
|  | { | 
|  | unsigned long flags; | 
|  | int ret = -EINVAL; | 
|  |  | 
|  | if (clk == NULL || IS_ERR(clk)) | 
|  | return ret; | 
|  |  | 
|  | spin_lock_irqsave(&clockfw_lock, flags); | 
|  | ret = omap1_clk_set_rate(clk, rate); | 
|  | if (ret == 0) | 
|  | propagate_rate(clk); | 
|  | spin_unlock_irqrestore(&clockfw_lock, flags); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  | EXPORT_SYMBOL(clk_set_rate); | 
|  |  | 
|  | int clk_set_parent(struct clk *clk, struct clk *parent) | 
|  | { | 
|  | WARN_ONCE(1, "clk_set_parent() not implemented for OMAP1\n"); | 
|  |  | 
|  | return -EINVAL; | 
|  | } | 
|  | EXPORT_SYMBOL(clk_set_parent); | 
|  |  | 
|  | struct clk *clk_get_parent(struct clk *clk) | 
|  | { | 
|  | return clk->parent; | 
|  | } | 
|  | EXPORT_SYMBOL(clk_get_parent); | 
|  |  | 
|  | /* | 
|  | * OMAP specific clock functions shared between omap1 and omap2 | 
|  | */ | 
|  |  | 
|  | int __initdata mpurate; | 
|  |  | 
|  | /* | 
|  | * By default we use the rate set by the bootloader. | 
|  | * You can override this with mpurate= cmdline option. | 
|  | */ | 
|  | static int __init omap_clk_setup(char *str) | 
|  | { | 
|  | get_option(&str, &mpurate); | 
|  |  | 
|  | if (!mpurate) | 
|  | return 1; | 
|  |  | 
|  | if (mpurate < 1000) | 
|  | mpurate *= 1000000; | 
|  |  | 
|  | return 1; | 
|  | } | 
|  | __setup("mpurate=", omap_clk_setup); | 
|  |  | 
|  | /* Used for clocks that always have same value as the parent clock */ | 
|  | unsigned long followparent_recalc(struct clk *clk) | 
|  | { | 
|  | return clk->parent->rate; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Used for clocks that have the same value as the parent clock, | 
|  | * divided by some factor | 
|  | */ | 
|  | unsigned long omap_fixed_divisor_recalc(struct clk *clk) | 
|  | { | 
|  | WARN_ON(!clk->fixed_div); | 
|  |  | 
|  | return clk->parent->rate / clk->fixed_div; | 
|  | } | 
|  |  | 
|  | void clk_reparent(struct clk *child, struct clk *parent) | 
|  | { | 
|  | list_del_init(&child->sibling); | 
|  | if (parent) | 
|  | list_add(&child->sibling, &parent->children); | 
|  | child->parent = parent; | 
|  |  | 
|  | /* now do the debugfs renaming to reattach the child | 
|  | to the proper parent */ | 
|  | } | 
|  |  | 
|  | /* Propagate rate to children */ | 
|  | void propagate_rate(struct clk *tclk) | 
|  | { | 
|  | struct clk *clkp; | 
|  |  | 
|  | list_for_each_entry(clkp, &tclk->children, sibling) { | 
|  | if (clkp->recalc) | 
|  | clkp->rate = clkp->recalc(clkp); | 
|  | propagate_rate(clkp); | 
|  | } | 
|  | } | 
|  |  | 
|  | static LIST_HEAD(root_clks); | 
|  |  | 
|  | /** | 
|  | * recalculate_root_clocks - recalculate and propagate all root clocks | 
|  | * | 
|  | * Recalculates all root clocks (clocks with no parent), which if the | 
|  | * clock's .recalc is set correctly, should also propagate their rates. | 
|  | * Called at init. | 
|  | */ | 
|  | void recalculate_root_clocks(void) | 
|  | { | 
|  | struct clk *clkp; | 
|  |  | 
|  | list_for_each_entry(clkp, &root_clks, sibling) { | 
|  | if (clkp->recalc) | 
|  | clkp->rate = clkp->recalc(clkp); | 
|  | propagate_rate(clkp); | 
|  | } | 
|  | } | 
|  |  | 
|  | /** | 
|  | * clk_preinit - initialize any fields in the struct clk before clk init | 
|  | * @clk: struct clk * to initialize | 
|  | * | 
|  | * Initialize any struct clk fields needed before normal clk initialization | 
|  | * can run.  No return value. | 
|  | */ | 
|  | void clk_preinit(struct clk *clk) | 
|  | { | 
|  | INIT_LIST_HEAD(&clk->children); | 
|  | } | 
|  |  | 
|  | int clk_register(struct clk *clk) | 
|  | { | 
|  | if (clk == NULL || IS_ERR(clk)) | 
|  | return -EINVAL; | 
|  |  | 
|  | /* | 
|  | * trap out already registered clocks | 
|  | */ | 
|  | if (clk->node.next || clk->node.prev) | 
|  | return 0; | 
|  |  | 
|  | mutex_lock(&clocks_mutex); | 
|  | if (clk->parent) | 
|  | list_add(&clk->sibling, &clk->parent->children); | 
|  | else | 
|  | list_add(&clk->sibling, &root_clks); | 
|  |  | 
|  | list_add(&clk->node, &clocks); | 
|  | if (clk->init) | 
|  | clk->init(clk); | 
|  | mutex_unlock(&clocks_mutex); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | EXPORT_SYMBOL(clk_register); | 
|  |  | 
|  | void clk_unregister(struct clk *clk) | 
|  | { | 
|  | if (clk == NULL || IS_ERR(clk)) | 
|  | return; | 
|  |  | 
|  | mutex_lock(&clocks_mutex); | 
|  | list_del(&clk->sibling); | 
|  | list_del(&clk->node); | 
|  | mutex_unlock(&clocks_mutex); | 
|  | } | 
|  | EXPORT_SYMBOL(clk_unregister); | 
|  |  | 
|  | void clk_enable_init_clocks(void) | 
|  | { | 
|  | struct clk *clkp; | 
|  |  | 
|  | list_for_each_entry(clkp, &clocks, node) | 
|  | if (clkp->flags & ENABLE_ON_INIT) | 
|  | clk_enable(clkp); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * omap_clk_get_by_name - locate OMAP struct clk by its name | 
|  | * @name: name of the struct clk to locate | 
|  | * | 
|  | * Locate an OMAP struct clk by its name.  Assumes that struct clk | 
|  | * names are unique.  Returns NULL if not found or a pointer to the | 
|  | * struct clk if found. | 
|  | */ | 
|  | struct clk *omap_clk_get_by_name(const char *name) | 
|  | { | 
|  | struct clk *c; | 
|  | struct clk *ret = NULL; | 
|  |  | 
|  | mutex_lock(&clocks_mutex); | 
|  |  | 
|  | list_for_each_entry(c, &clocks, node) { | 
|  | if (!strcmp(c->name, name)) { | 
|  | ret = c; | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | mutex_unlock(&clocks_mutex); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | int omap_clk_enable_autoidle_all(void) | 
|  | { | 
|  | struct clk *c; | 
|  | unsigned long flags; | 
|  |  | 
|  | spin_lock_irqsave(&clockfw_lock, flags); | 
|  |  | 
|  | list_for_each_entry(c, &clocks, node) | 
|  | if (c->ops->allow_idle) | 
|  | c->ops->allow_idle(c); | 
|  |  | 
|  | spin_unlock_irqrestore(&clockfw_lock, flags); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int omap_clk_disable_autoidle_all(void) | 
|  | { | 
|  | struct clk *c; | 
|  | unsigned long flags; | 
|  |  | 
|  | spin_lock_irqsave(&clockfw_lock, flags); | 
|  |  | 
|  | list_for_each_entry(c, &clocks, node) | 
|  | if (c->ops->deny_idle) | 
|  | c->ops->deny_idle(c); | 
|  |  | 
|  | spin_unlock_irqrestore(&clockfw_lock, flags); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Low level helpers | 
|  | */ | 
|  | static int clkll_enable_null(struct clk *clk) | 
|  | { | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void clkll_disable_null(struct clk *clk) | 
|  | { | 
|  | } | 
|  |  | 
|  | const struct clkops clkops_null = { | 
|  | .enable		= clkll_enable_null, | 
|  | .disable	= clkll_disable_null, | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * Dummy clock | 
|  | * | 
|  | * Used for clock aliases that are needed on some OMAPs, but not others | 
|  | */ | 
|  | struct clk dummy_ck = { | 
|  | .name	= "dummy", | 
|  | .ops	= &clkops_null, | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * | 
|  | */ | 
|  |  | 
|  | #ifdef CONFIG_OMAP_RESET_CLOCKS | 
|  | /* | 
|  | * Disable any unused clocks left on by the bootloader | 
|  | */ | 
|  | static int __init clk_disable_unused(void) | 
|  | { | 
|  | struct clk *ck; | 
|  | unsigned long flags; | 
|  |  | 
|  | pr_info("clock: disabling unused clocks to save power\n"); | 
|  |  | 
|  | spin_lock_irqsave(&clockfw_lock, flags); | 
|  | list_for_each_entry(ck, &clocks, node) { | 
|  | if (ck->ops == &clkops_null) | 
|  | continue; | 
|  |  | 
|  | if (ck->usecount > 0 || !ck->enable_reg) | 
|  | continue; | 
|  |  | 
|  | omap1_clk_disable_unused(ck); | 
|  | } | 
|  | spin_unlock_irqrestore(&clockfw_lock, flags); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | late_initcall(clk_disable_unused); | 
|  | late_initcall(omap_clk_enable_autoidle_all); | 
|  | #endif | 
|  |  | 
|  | #if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) | 
|  | /* | 
|  | *	debugfs support to trace clock tree hierarchy and attributes | 
|  | */ | 
|  |  | 
|  | #include <linux/debugfs.h> | 
|  | #include <linux/seq_file.h> | 
|  |  | 
|  | static struct dentry *clk_debugfs_root; | 
|  |  | 
|  | static int clk_dbg_show_summary(struct seq_file *s, void *unused) | 
|  | { | 
|  | struct clk *c; | 
|  | struct clk *pa; | 
|  |  | 
|  | mutex_lock(&clocks_mutex); | 
|  | seq_printf(s, "%-30s %-30s %-10s %s\n", | 
|  | "clock-name", "parent-name", "rate", "use-count"); | 
|  |  | 
|  | list_for_each_entry(c, &clocks, node) { | 
|  | pa = c->parent; | 
|  | seq_printf(s, "%-30s %-30s %-10lu %d\n", | 
|  | c->name, pa ? pa->name : "none", c->rate, | 
|  | c->usecount); | 
|  | } | 
|  | mutex_unlock(&clocks_mutex); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int clk_dbg_open(struct inode *inode, struct file *file) | 
|  | { | 
|  | return single_open(file, clk_dbg_show_summary, inode->i_private); | 
|  | } | 
|  |  | 
|  | static const struct file_operations debug_clock_fops = { | 
|  | .open           = clk_dbg_open, | 
|  | .read           = seq_read, | 
|  | .llseek         = seq_lseek, | 
|  | .release        = single_release, | 
|  | }; | 
|  |  | 
|  | static int clk_debugfs_register_one(struct clk *c) | 
|  | { | 
|  | int err; | 
|  | struct dentry *d; | 
|  | struct clk *pa = c->parent; | 
|  |  | 
|  | d = debugfs_create_dir(c->name, pa ? pa->dent : clk_debugfs_root); | 
|  | if (!d) | 
|  | return -ENOMEM; | 
|  | c->dent = d; | 
|  |  | 
|  | d = debugfs_create_u8("usecount", S_IRUGO, c->dent, (u8 *)&c->usecount); | 
|  | if (!d) { | 
|  | err = -ENOMEM; | 
|  | goto err_out; | 
|  | } | 
|  | d = debugfs_create_u32("rate", S_IRUGO, c->dent, (u32 *)&c->rate); | 
|  | if (!d) { | 
|  | err = -ENOMEM; | 
|  | goto err_out; | 
|  | } | 
|  | d = debugfs_create_x32("flags", S_IRUGO, c->dent, (u32 *)&c->flags); | 
|  | if (!d) { | 
|  | err = -ENOMEM; | 
|  | goto err_out; | 
|  | } | 
|  | return 0; | 
|  |  | 
|  | err_out: | 
|  | debugfs_remove_recursive(c->dent); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static int clk_debugfs_register(struct clk *c) | 
|  | { | 
|  | int err; | 
|  | struct clk *pa = c->parent; | 
|  |  | 
|  | if (pa && !pa->dent) { | 
|  | err = clk_debugfs_register(pa); | 
|  | if (err) | 
|  | return err; | 
|  | } | 
|  |  | 
|  | if (!c->dent) { | 
|  | err = clk_debugfs_register_one(c); | 
|  | if (err) | 
|  | return err; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int __init clk_debugfs_init(void) | 
|  | { | 
|  | struct clk *c; | 
|  | struct dentry *d; | 
|  | int err; | 
|  |  | 
|  | d = debugfs_create_dir("clock", NULL); | 
|  | if (!d) | 
|  | return -ENOMEM; | 
|  | clk_debugfs_root = d; | 
|  |  | 
|  | list_for_each_entry(c, &clocks, node) { | 
|  | err = clk_debugfs_register(c); | 
|  | if (err) | 
|  | goto err_out; | 
|  | } | 
|  |  | 
|  | d = debugfs_create_file("summary", S_IRUGO, | 
|  | d, NULL, &debug_clock_fops); | 
|  | if (!d) | 
|  | return -ENOMEM; | 
|  |  | 
|  | return 0; | 
|  | err_out: | 
|  | debugfs_remove_recursive(clk_debugfs_root); | 
|  | return err; | 
|  | } | 
|  | late_initcall(clk_debugfs_init); | 
|  |  | 
|  | #endif /* defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) */ |