| /* |
| * Handle extern requests for shutdown, reboot and sysrq |
| */ |
| #include <linux/kernel.h> |
| #include <linux/err.h> |
| #include <linux/slab.h> |
| #include <linux/reboot.h> |
| #include <linux/sysrq.h> |
| #include <linux/stop_machine.h> |
| #include <linux/freezer.h> |
| |
| #include <xen/xen.h> |
| #include <xen/xenbus.h> |
| #include <xen/grant_table.h> |
| #include <xen/events.h> |
| #include <xen/hvc-console.h> |
| #include <xen/xen-ops.h> |
| |
| #include <asm/xen/hypercall.h> |
| #include <asm/xen/page.h> |
| #include <asm/xen/hypervisor.h> |
| |
| enum shutdown_state { |
| SHUTDOWN_INVALID = -1, |
| SHUTDOWN_POWEROFF = 0, |
| SHUTDOWN_SUSPEND = 2, |
| /* Code 3 is SHUTDOWN_CRASH, which we don't use because the domain can only |
| report a crash, not be instructed to crash! |
| HALT is the same as POWEROFF, as far as we're concerned. The tools use |
| the distinction when we return the reason code to them. */ |
| SHUTDOWN_HALT = 4, |
| }; |
| |
| /* Ignore multiple shutdown requests. */ |
| static enum shutdown_state shutting_down = SHUTDOWN_INVALID; |
| |
| struct suspend_info { |
| int cancelled; |
| unsigned long arg; /* extra hypercall argument */ |
| void (*pre)(void); |
| void (*post)(int cancelled); |
| }; |
| |
| static void xen_hvm_post_suspend(int cancelled) |
| { |
| xen_arch_hvm_post_suspend(cancelled); |
| gnttab_resume(); |
| } |
| |
| static void xen_pre_suspend(void) |
| { |
| xen_mm_pin_all(); |
| gnttab_suspend(); |
| xen_arch_pre_suspend(); |
| } |
| |
| static void xen_post_suspend(int cancelled) |
| { |
| xen_arch_post_suspend(cancelled); |
| gnttab_resume(); |
| xen_mm_unpin_all(); |
| } |
| |
| #ifdef CONFIG_HIBERNATE_CALLBACKS |
| static int xen_suspend(void *data) |
| { |
| struct suspend_info *si = data; |
| int err; |
| |
| BUG_ON(!irqs_disabled()); |
| |
| err = sysdev_suspend(PMSG_FREEZE); |
| if (err) { |
| printk(KERN_ERR "xen_suspend: sysdev_suspend failed: %d\n", |
| err); |
| return err; |
| } |
| |
| if (si->pre) |
| si->pre(); |
| |
| /* |
| * This hypercall returns 1 if suspend was cancelled |
| * or the domain was merely checkpointed, and 0 if it |
| * is resuming in a new domain. |
| */ |
| si->cancelled = HYPERVISOR_suspend(si->arg); |
| |
| if (si->post) |
| si->post(si->cancelled); |
| |
| if (!si->cancelled) { |
| xen_irq_resume(); |
| xen_console_resume(); |
| xen_timer_resume(); |
| } |
| |
| sysdev_resume(); |
| |
| return 0; |
| } |
| |
| static void do_suspend(void) |
| { |
| int err; |
| struct suspend_info si; |
| |
| shutting_down = SHUTDOWN_SUSPEND; |
| |
| #ifdef CONFIG_PREEMPT |
| /* If the kernel is preemptible, we need to freeze all the processes |
| to prevent them from being in the middle of a pagetable update |
| during suspend. */ |
| err = freeze_processes(); |
| if (err) { |
| printk(KERN_ERR "xen suspend: freeze failed %d\n", err); |
| goto out; |
| } |
| #endif |
| |
| err = dpm_suspend_start(PMSG_FREEZE); |
| if (err) { |
| printk(KERN_ERR "xen suspend: dpm_suspend_start %d\n", err); |
| goto out_thaw; |
| } |
| |
| printk(KERN_DEBUG "suspending xenstore...\n"); |
| xs_suspend(); |
| |
| err = dpm_suspend_noirq(PMSG_FREEZE); |
| if (err) { |
| printk(KERN_ERR "dpm_suspend_noirq failed: %d\n", err); |
| goto out_resume; |
| } |
| |
| si.cancelled = 1; |
| |
| if (xen_hvm_domain()) { |
| si.arg = 0UL; |
| si.pre = NULL; |
| si.post = &xen_hvm_post_suspend; |
| } else { |
| si.arg = virt_to_mfn(xen_start_info); |
| si.pre = &xen_pre_suspend; |
| si.post = &xen_post_suspend; |
| } |
| |
| err = stop_machine(xen_suspend, &si, cpumask_of(0)); |
| |
| dpm_resume_noirq(si.cancelled ? PMSG_THAW : PMSG_RESTORE); |
| |
| if (err) { |
| printk(KERN_ERR "failed to start xen_suspend: %d\n", err); |
| si.cancelled = 1; |
| } |
| |
| out_resume: |
| if (!si.cancelled) { |
| xen_arch_resume(); |
| xs_resume(); |
| } else |
| xs_suspend_cancel(); |
| |
| dpm_resume_end(si.cancelled ? PMSG_THAW : PMSG_RESTORE); |
| |
| /* Make sure timer events get retriggered on all CPUs */ |
| clock_was_set(); |
| |
| out_thaw: |
| #ifdef CONFIG_PREEMPT |
| thaw_processes(); |
| out: |
| #endif |
| shutting_down = SHUTDOWN_INVALID; |
| } |
| #endif /* CONFIG_HIBERNATE_CALLBACKS */ |
| |
| struct shutdown_handler { |
| const char *command; |
| void (*cb)(void); |
| }; |
| |
| static void do_poweroff(void) |
| { |
| shutting_down = SHUTDOWN_POWEROFF; |
| orderly_poweroff(false); |
| } |
| |
| static void do_reboot(void) |
| { |
| shutting_down = SHUTDOWN_POWEROFF; /* ? */ |
| ctrl_alt_del(); |
| } |
| |
| static void shutdown_handler(struct xenbus_watch *watch, |
| const char **vec, unsigned int len) |
| { |
| char *str; |
| struct xenbus_transaction xbt; |
| int err; |
| static struct shutdown_handler handlers[] = { |
| { "poweroff", do_poweroff }, |
| { "halt", do_poweroff }, |
| { "reboot", do_reboot }, |
| #ifdef CONFIG_HIBERNATE_CALLBACKS |
| { "suspend", do_suspend }, |
| #endif |
| {NULL, NULL}, |
| }; |
| static struct shutdown_handler *handler; |
| |
| if (shutting_down != SHUTDOWN_INVALID) |
| return; |
| |
| again: |
| err = xenbus_transaction_start(&xbt); |
| if (err) |
| return; |
| |
| str = (char *)xenbus_read(xbt, "control", "shutdown", NULL); |
| /* Ignore read errors and empty reads. */ |
| if (XENBUS_IS_ERR_READ(str)) { |
| xenbus_transaction_end(xbt, 1); |
| return; |
| } |
| |
| for (handler = &handlers[0]; handler->command; handler++) { |
| if (strcmp(str, handler->command) == 0) |
| break; |
| } |
| |
| /* Only acknowledge commands which we are prepared to handle. */ |
| if (handler->cb) |
| xenbus_write(xbt, "control", "shutdown", ""); |
| |
| err = xenbus_transaction_end(xbt, 0); |
| if (err == -EAGAIN) { |
| kfree(str); |
| goto again; |
| } |
| |
| if (handler->cb) { |
| handler->cb(); |
| } else { |
| printk(KERN_INFO "Ignoring shutdown request: %s\n", str); |
| shutting_down = SHUTDOWN_INVALID; |
| } |
| |
| kfree(str); |
| } |
| |
| #ifdef CONFIG_MAGIC_SYSRQ |
| static void sysrq_handler(struct xenbus_watch *watch, const char **vec, |
| unsigned int len) |
| { |
| char sysrq_key = '\0'; |
| struct xenbus_transaction xbt; |
| int err; |
| |
| again: |
| err = xenbus_transaction_start(&xbt); |
| if (err) |
| return; |
| if (!xenbus_scanf(xbt, "control", "sysrq", "%c", &sysrq_key)) { |
| printk(KERN_ERR "Unable to read sysrq code in " |
| "control/sysrq\n"); |
| xenbus_transaction_end(xbt, 1); |
| return; |
| } |
| |
| if (sysrq_key != '\0') |
| xenbus_printf(xbt, "control", "sysrq", "%c", '\0'); |
| |
| err = xenbus_transaction_end(xbt, 0); |
| if (err == -EAGAIN) |
| goto again; |
| |
| if (sysrq_key != '\0') |
| handle_sysrq(sysrq_key); |
| } |
| |
| static struct xenbus_watch sysrq_watch = { |
| .node = "control/sysrq", |
| .callback = sysrq_handler |
| }; |
| #endif |
| |
| static struct xenbus_watch shutdown_watch = { |
| .node = "control/shutdown", |
| .callback = shutdown_handler |
| }; |
| |
| static int setup_shutdown_watcher(void) |
| { |
| int err; |
| |
| err = register_xenbus_watch(&shutdown_watch); |
| if (err) { |
| printk(KERN_ERR "Failed to set shutdown watcher\n"); |
| return err; |
| } |
| |
| #ifdef CONFIG_MAGIC_SYSRQ |
| err = register_xenbus_watch(&sysrq_watch); |
| if (err) { |
| printk(KERN_ERR "Failed to set sysrq watcher\n"); |
| return err; |
| } |
| #endif |
| |
| return 0; |
| } |
| |
| static int shutdown_event(struct notifier_block *notifier, |
| unsigned long event, |
| void *data) |
| { |
| setup_shutdown_watcher(); |
| return NOTIFY_DONE; |
| } |
| |
| int xen_setup_shutdown_event(void) |
| { |
| static struct notifier_block xenstore_notifier = { |
| .notifier_call = shutdown_event |
| }; |
| |
| if (!xen_domain()) |
| return -ENODEV; |
| register_xenstore_notifier(&xenstore_notifier); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(xen_setup_shutdown_event); |
| |
| subsys_initcall(xen_setup_shutdown_event); |