| /* | |
| * linux/kernel/power/swap.c | |
| * | |
| * This file provides functions for reading the suspend image from | |
| * and writing it to a swap partition. | |
| * | |
| * Copyright (C) 1998,2001-2005 Pavel Machek <pavel@suse.cz> | |
| * Copyright (C) 2006 Rafael J. Wysocki <rjw@sisk.pl> | |
| * | |
| * This file is released under the GPLv2. | |
| * | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/file.h> | |
| #include <linux/utsname.h> | |
| #include <linux/delay.h> | |
| #include <linux/bitops.h> | |
| #include <linux/genhd.h> | |
| #include <linux/device.h> | |
| #include <linux/buffer_head.h> | |
| #include <linux/bio.h> | |
| #include <linux/blkdev.h> | |
| #include <linux/swap.h> | |
| #include <linux/swapops.h> | |
| #include <linux/pm.h> | |
| #include "power.h" | |
| #define SWSUSP_SIG "S1SUSPEND" | |
| struct swsusp_header { | |
| char reserved[PAGE_SIZE - 20 - sizeof(sector_t) - sizeof(int)]; | |
| sector_t image; | |
| unsigned int flags; /* Flags to pass to the "boot" kernel */ | |
| char orig_sig[10]; | |
| char sig[10]; | |
| } __attribute__((packed)); | |
| static struct swsusp_header *swsusp_header; | |
| /* | |
| * General things | |
| */ | |
| static unsigned short root_swap = 0xffff; | |
| static struct block_device *resume_bdev; | |
| /** | |
| * submit - submit BIO request. | |
| * @rw: READ or WRITE. | |
| * @off physical offset of page. | |
| * @page: page we're reading or writing. | |
| * @bio_chain: list of pending biod (for async reading) | |
| * | |
| * Straight from the textbook - allocate and initialize the bio. | |
| * If we're reading, make sure the page is marked as dirty. | |
| * Then submit it and, if @bio_chain == NULL, wait. | |
| */ | |
| static int submit(int rw, pgoff_t page_off, struct page *page, | |
| struct bio **bio_chain) | |
| { | |
| const int bio_rw = rw | (1 << BIO_RW_SYNCIO) | (1 << BIO_RW_UNPLUG); | |
| struct bio *bio; | |
| bio = bio_alloc(__GFP_WAIT | __GFP_HIGH, 1); | |
| if (!bio) | |
| return -ENOMEM; | |
| bio->bi_sector = page_off * (PAGE_SIZE >> 9); | |
| bio->bi_bdev = resume_bdev; | |
| bio->bi_end_io = end_swap_bio_read; | |
| if (bio_add_page(bio, page, PAGE_SIZE, 0) < PAGE_SIZE) { | |
| printk(KERN_ERR "PM: Adding page to bio failed at %ld\n", | |
| page_off); | |
| bio_put(bio); | |
| return -EFAULT; | |
| } | |
| lock_page(page); | |
| bio_get(bio); | |
| if (bio_chain == NULL) { | |
| submit_bio(bio_rw, bio); | |
| wait_on_page_locked(page); | |
| if (rw == READ) | |
| bio_set_pages_dirty(bio); | |
| bio_put(bio); | |
| } else { | |
| if (rw == READ) | |
| get_page(page); /* These pages are freed later */ | |
| bio->bi_private = *bio_chain; | |
| *bio_chain = bio; | |
| submit_bio(bio_rw, bio); | |
| } | |
| return 0; | |
| } | |
| static int bio_read_page(pgoff_t page_off, void *addr, struct bio **bio_chain) | |
| { | |
| return submit(READ, page_off, virt_to_page(addr), bio_chain); | |
| } | |
| static int bio_write_page(pgoff_t page_off, void *addr, struct bio **bio_chain) | |
| { | |
| return submit(WRITE, page_off, virt_to_page(addr), bio_chain); | |
| } | |
| static int wait_on_bio_chain(struct bio **bio_chain) | |
| { | |
| struct bio *bio; | |
| struct bio *next_bio; | |
| int ret = 0; | |
| if (bio_chain == NULL) | |
| return 0; | |
| bio = *bio_chain; | |
| if (bio == NULL) | |
| return 0; | |
| while (bio) { | |
| struct page *page; | |
| next_bio = bio->bi_private; | |
| page = bio->bi_io_vec[0].bv_page; | |
| wait_on_page_locked(page); | |
| if (!PageUptodate(page) || PageError(page)) | |
| ret = -EIO; | |
| put_page(page); | |
| bio_put(bio); | |
| bio = next_bio; | |
| } | |
| *bio_chain = NULL; | |
| return ret; | |
| } | |
| /* | |
| * Saving part | |
| */ | |
| static int mark_swapfiles(sector_t start, unsigned int flags) | |
| { | |
| int error; | |
| bio_read_page(swsusp_resume_block, swsusp_header, NULL); | |
| if (!memcmp("SWAP-SPACE",swsusp_header->sig, 10) || | |
| !memcmp("SWAPSPACE2",swsusp_header->sig, 10)) { | |
| memcpy(swsusp_header->orig_sig,swsusp_header->sig, 10); | |
| memcpy(swsusp_header->sig,SWSUSP_SIG, 10); | |
| swsusp_header->image = start; | |
| swsusp_header->flags = flags; | |
| error = bio_write_page(swsusp_resume_block, | |
| swsusp_header, NULL); | |
| } else { | |
| printk(KERN_ERR "PM: Swap header not found!\n"); | |
| error = -ENODEV; | |
| } | |
| return error; | |
| } | |
| /** | |
| * swsusp_swap_check - check if the resume device is a swap device | |
| * and get its index (if so) | |
| */ | |
| static int swsusp_swap_check(void) /* This is called before saving image */ | |
| { | |
| int res; | |
| res = swap_type_of(swsusp_resume_device, swsusp_resume_block, | |
| &resume_bdev); | |
| if (res < 0) | |
| return res; | |
| root_swap = res; | |
| res = blkdev_get(resume_bdev, FMODE_WRITE); | |
| if (res) | |
| return res; | |
| res = set_blocksize(resume_bdev, PAGE_SIZE); | |
| if (res < 0) | |
| blkdev_put(resume_bdev, FMODE_WRITE); | |
| return res; | |
| } | |
| /** | |
| * write_page - Write one page to given swap location. | |
| * @buf: Address we're writing. | |
| * @offset: Offset of the swap page we're writing to. | |
| * @bio_chain: Link the next write BIO here | |
| */ | |
| static int write_page(void *buf, sector_t offset, struct bio **bio_chain) | |
| { | |
| void *src; | |
| if (!offset) | |
| return -ENOSPC; | |
| if (bio_chain) { | |
| src = (void *)__get_free_page(__GFP_WAIT | __GFP_HIGH); | |
| if (src) { | |
| memcpy(src, buf, PAGE_SIZE); | |
| } else { | |
| WARN_ON_ONCE(1); | |
| bio_chain = NULL; /* Go synchronous */ | |
| src = buf; | |
| } | |
| } else { | |
| src = buf; | |
| } | |
| return bio_write_page(offset, src, bio_chain); | |
| } | |
| /* | |
| * The swap map is a data structure used for keeping track of each page | |
| * written to a swap partition. It consists of many swap_map_page | |
| * structures that contain each an array of MAP_PAGE_SIZE swap entries. | |
| * These structures are stored on the swap and linked together with the | |
| * help of the .next_swap member. | |
| * | |
| * The swap map is created during suspend. The swap map pages are | |
| * allocated and populated one at a time, so we only need one memory | |
| * page to set up the entire structure. | |
| * | |
| * During resume we also only need to use one swap_map_page structure | |
| * at a time. | |
| */ | |
| #define MAP_PAGE_ENTRIES (PAGE_SIZE / sizeof(sector_t) - 1) | |
| struct swap_map_page { | |
| sector_t entries[MAP_PAGE_ENTRIES]; | |
| sector_t next_swap; | |
| }; | |
| /** | |
| * The swap_map_handle structure is used for handling swap in | |
| * a file-alike way | |
| */ | |
| struct swap_map_handle { | |
| struct swap_map_page *cur; | |
| sector_t cur_swap; | |
| unsigned int k; | |
| }; | |
| static void release_swap_writer(struct swap_map_handle *handle) | |
| { | |
| if (handle->cur) | |
| free_page((unsigned long)handle->cur); | |
| handle->cur = NULL; | |
| } | |
| static int get_swap_writer(struct swap_map_handle *handle) | |
| { | |
| handle->cur = (struct swap_map_page *)get_zeroed_page(GFP_KERNEL); | |
| if (!handle->cur) | |
| return -ENOMEM; | |
| handle->cur_swap = alloc_swapdev_block(root_swap); | |
| if (!handle->cur_swap) { | |
| release_swap_writer(handle); | |
| return -ENOSPC; | |
| } | |
| handle->k = 0; | |
| return 0; | |
| } | |
| static int swap_write_page(struct swap_map_handle *handle, void *buf, | |
| struct bio **bio_chain) | |
| { | |
| int error = 0; | |
| sector_t offset; | |
| if (!handle->cur) | |
| return -EINVAL; | |
| offset = alloc_swapdev_block(root_swap); | |
| error = write_page(buf, offset, bio_chain); | |
| if (error) | |
| return error; | |
| handle->cur->entries[handle->k++] = offset; | |
| if (handle->k >= MAP_PAGE_ENTRIES) { | |
| error = wait_on_bio_chain(bio_chain); | |
| if (error) | |
| goto out; | |
| offset = alloc_swapdev_block(root_swap); | |
| if (!offset) | |
| return -ENOSPC; | |
| handle->cur->next_swap = offset; | |
| error = write_page(handle->cur, handle->cur_swap, NULL); | |
| if (error) | |
| goto out; | |
| memset(handle->cur, 0, PAGE_SIZE); | |
| handle->cur_swap = offset; | |
| handle->k = 0; | |
| } | |
| out: | |
| return error; | |
| } | |
| static int flush_swap_writer(struct swap_map_handle *handle) | |
| { | |
| if (handle->cur && handle->cur_swap) | |
| return write_page(handle->cur, handle->cur_swap, NULL); | |
| else | |
| return -EINVAL; | |
| } | |
| /** | |
| * save_image - save the suspend image data | |
| */ | |
| static int save_image(struct swap_map_handle *handle, | |
| struct snapshot_handle *snapshot, | |
| unsigned int nr_to_write) | |
| { | |
| unsigned int m; | |
| int ret; | |
| int error = 0; | |
| int nr_pages; | |
| int err2; | |
| struct bio *bio; | |
| struct timeval start; | |
| struct timeval stop; | |
| printk(KERN_INFO "PM: Saving image data pages (%u pages) ... ", | |
| nr_to_write); | |
| m = nr_to_write / 100; | |
| if (!m) | |
| m = 1; | |
| nr_pages = 0; | |
| bio = NULL; | |
| do_gettimeofday(&start); | |
| do { | |
| ret = snapshot_read_next(snapshot, PAGE_SIZE); | |
| if (ret > 0) { | |
| error = swap_write_page(handle, data_of(*snapshot), | |
| &bio); | |
| if (error) | |
| break; | |
| if (!(nr_pages % m)) | |
| printk("\b\b\b\b%3d%%", nr_pages / m); | |
| nr_pages++; | |
| } | |
| } while (ret > 0); | |
| err2 = wait_on_bio_chain(&bio); | |
| do_gettimeofday(&stop); | |
| if (!error) | |
| error = err2; | |
| if (!error) | |
| printk("\b\b\b\bdone\n"); | |
| swsusp_show_speed(&start, &stop, nr_to_write, "Wrote"); | |
| return error; | |
| } | |
| /** | |
| * enough_swap - Make sure we have enough swap to save the image. | |
| * | |
| * Returns TRUE or FALSE after checking the total amount of swap | |
| * space avaiable from the resume partition. | |
| */ | |
| static int enough_swap(unsigned int nr_pages) | |
| { | |
| unsigned int free_swap = count_swap_pages(root_swap, 1); | |
| pr_debug("PM: Free swap pages: %u\n", free_swap); | |
| return free_swap > nr_pages + PAGES_FOR_IO; | |
| } | |
| /** | |
| * swsusp_write - Write entire image and metadata. | |
| * @flags: flags to pass to the "boot" kernel in the image header | |
| * | |
| * It is important _NOT_ to umount filesystems at this point. We want | |
| * them synced (in case something goes wrong) but we DO not want to mark | |
| * filesystem clean: it is not. (And it does not matter, if we resume | |
| * correctly, we'll mark system clean, anyway.) | |
| */ | |
| int swsusp_write(unsigned int flags) | |
| { | |
| struct swap_map_handle handle; | |
| struct snapshot_handle snapshot; | |
| struct swsusp_info *header; | |
| int error; | |
| error = swsusp_swap_check(); | |
| if (error) { | |
| printk(KERN_ERR "PM: Cannot find swap device, try " | |
| "swapon -a.\n"); | |
| return error; | |
| } | |
| memset(&snapshot, 0, sizeof(struct snapshot_handle)); | |
| error = snapshot_read_next(&snapshot, PAGE_SIZE); | |
| if (error < PAGE_SIZE) { | |
| if (error >= 0) | |
| error = -EFAULT; | |
| goto out; | |
| } | |
| header = (struct swsusp_info *)data_of(snapshot); | |
| if (!enough_swap(header->pages)) { | |
| printk(KERN_ERR "PM: Not enough free swap\n"); | |
| error = -ENOSPC; | |
| goto out; | |
| } | |
| error = get_swap_writer(&handle); | |
| if (!error) { | |
| sector_t start = handle.cur_swap; | |
| error = swap_write_page(&handle, header, NULL); | |
| if (!error) | |
| error = save_image(&handle, &snapshot, | |
| header->pages - 1); | |
| if (!error) { | |
| flush_swap_writer(&handle); | |
| printk(KERN_INFO "PM: S"); | |
| error = mark_swapfiles(start, flags); | |
| printk("|\n"); | |
| } | |
| } | |
| if (error) | |
| free_all_swap_pages(root_swap); | |
| release_swap_writer(&handle); | |
| out: | |
| swsusp_close(FMODE_WRITE); | |
| return error; | |
| } | |
| /** | |
| * The following functions allow us to read data using a swap map | |
| * in a file-alike way | |
| */ | |
| static void release_swap_reader(struct swap_map_handle *handle) | |
| { | |
| if (handle->cur) | |
| free_page((unsigned long)handle->cur); | |
| handle->cur = NULL; | |
| } | |
| static int get_swap_reader(struct swap_map_handle *handle, sector_t start) | |
| { | |
| int error; | |
| if (!start) | |
| return -EINVAL; | |
| handle->cur = (struct swap_map_page *)get_zeroed_page(__GFP_WAIT | __GFP_HIGH); | |
| if (!handle->cur) | |
| return -ENOMEM; | |
| error = bio_read_page(start, handle->cur, NULL); | |
| if (error) { | |
| release_swap_reader(handle); | |
| return error; | |
| } | |
| handle->k = 0; | |
| return 0; | |
| } | |
| static int swap_read_page(struct swap_map_handle *handle, void *buf, | |
| struct bio **bio_chain) | |
| { | |
| sector_t offset; | |
| int error; | |
| if (!handle->cur) | |
| return -EINVAL; | |
| offset = handle->cur->entries[handle->k]; | |
| if (!offset) | |
| return -EFAULT; | |
| error = bio_read_page(offset, buf, bio_chain); | |
| if (error) | |
| return error; | |
| if (++handle->k >= MAP_PAGE_ENTRIES) { | |
| error = wait_on_bio_chain(bio_chain); | |
| handle->k = 0; | |
| offset = handle->cur->next_swap; | |
| if (!offset) | |
| release_swap_reader(handle); | |
| else if (!error) | |
| error = bio_read_page(offset, handle->cur, NULL); | |
| } | |
| return error; | |
| } | |
| /** | |
| * load_image - load the image using the swap map handle | |
| * @handle and the snapshot handle @snapshot | |
| * (assume there are @nr_pages pages to load) | |
| */ | |
| static int load_image(struct swap_map_handle *handle, | |
| struct snapshot_handle *snapshot, | |
| unsigned int nr_to_read) | |
| { | |
| unsigned int m; | |
| int error = 0; | |
| struct timeval start; | |
| struct timeval stop; | |
| struct bio *bio; | |
| int err2; | |
| unsigned nr_pages; | |
| printk(KERN_INFO "PM: Loading image data pages (%u pages) ... ", | |
| nr_to_read); | |
| m = nr_to_read / 100; | |
| if (!m) | |
| m = 1; | |
| nr_pages = 0; | |
| bio = NULL; | |
| do_gettimeofday(&start); | |
| for ( ; ; ) { | |
| error = snapshot_write_next(snapshot, PAGE_SIZE); | |
| if (error <= 0) | |
| break; | |
| error = swap_read_page(handle, data_of(*snapshot), &bio); | |
| if (error) | |
| break; | |
| if (snapshot->sync_read) | |
| error = wait_on_bio_chain(&bio); | |
| if (error) | |
| break; | |
| if (!(nr_pages % m)) | |
| printk("\b\b\b\b%3d%%", nr_pages / m); | |
| nr_pages++; | |
| } | |
| err2 = wait_on_bio_chain(&bio); | |
| do_gettimeofday(&stop); | |
| if (!error) | |
| error = err2; | |
| if (!error) { | |
| printk("\b\b\b\bdone\n"); | |
| snapshot_write_finalize(snapshot); | |
| if (!snapshot_image_loaded(snapshot)) | |
| error = -ENODATA; | |
| } | |
| swsusp_show_speed(&start, &stop, nr_to_read, "Read"); | |
| return error; | |
| } | |
| /** | |
| * swsusp_read - read the hibernation image. | |
| * @flags_p: flags passed by the "frozen" kernel in the image header should | |
| * be written into this memeory location | |
| */ | |
| int swsusp_read(unsigned int *flags_p) | |
| { | |
| int error; | |
| struct swap_map_handle handle; | |
| struct snapshot_handle snapshot; | |
| struct swsusp_info *header; | |
| *flags_p = swsusp_header->flags; | |
| if (IS_ERR(resume_bdev)) { | |
| pr_debug("PM: Image device not initialised\n"); | |
| return PTR_ERR(resume_bdev); | |
| } | |
| memset(&snapshot, 0, sizeof(struct snapshot_handle)); | |
| error = snapshot_write_next(&snapshot, PAGE_SIZE); | |
| if (error < PAGE_SIZE) | |
| return error < 0 ? error : -EFAULT; | |
| header = (struct swsusp_info *)data_of(snapshot); | |
| error = get_swap_reader(&handle, swsusp_header->image); | |
| if (!error) | |
| error = swap_read_page(&handle, header, NULL); | |
| if (!error) | |
| error = load_image(&handle, &snapshot, header->pages - 1); | |
| release_swap_reader(&handle); | |
| blkdev_put(resume_bdev, FMODE_READ); | |
| if (!error) | |
| pr_debug("PM: Image successfully loaded\n"); | |
| else | |
| pr_debug("PM: Error %d resuming\n", error); | |
| return error; | |
| } | |
| /** | |
| * swsusp_check - Check for swsusp signature in the resume device | |
| */ | |
| int swsusp_check(void) | |
| { | |
| int error; | |
| resume_bdev = open_by_devnum(swsusp_resume_device, FMODE_READ); | |
| if (!IS_ERR(resume_bdev)) { | |
| set_blocksize(resume_bdev, PAGE_SIZE); | |
| memset(swsusp_header, 0, PAGE_SIZE); | |
| error = bio_read_page(swsusp_resume_block, | |
| swsusp_header, NULL); | |
| if (error) | |
| return error; | |
| if (!memcmp(SWSUSP_SIG, swsusp_header->sig, 10)) { | |
| memcpy(swsusp_header->sig, swsusp_header->orig_sig, 10); | |
| /* Reset swap signature now */ | |
| error = bio_write_page(swsusp_resume_block, | |
| swsusp_header, NULL); | |
| } else { | |
| return -EINVAL; | |
| } | |
| if (error) | |
| blkdev_put(resume_bdev, FMODE_READ); | |
| else | |
| pr_debug("PM: Signature found, resuming\n"); | |
| } else { | |
| error = PTR_ERR(resume_bdev); | |
| } | |
| if (error) | |
| pr_debug("PM: Error %d checking image file\n", error); | |
| return error; | |
| } | |
| /** | |
| * swsusp_close - close swap device. | |
| */ | |
| void swsusp_close(fmode_t mode) | |
| { | |
| if (IS_ERR(resume_bdev)) { | |
| pr_debug("PM: Image device not initialised\n"); | |
| return; | |
| } | |
| blkdev_put(resume_bdev, mode); | |
| } | |
| static int swsusp_header_init(void) | |
| { | |
| swsusp_header = (struct swsusp_header*) __get_free_page(GFP_KERNEL); | |
| if (!swsusp_header) | |
| panic("Could not allocate memory for swsusp_header\n"); | |
| return 0; | |
| } | |
| core_initcall(swsusp_header_init); |