| /* | |
| * Touch Screen driver for Renesas MIGO-R Platform | |
| * | |
| * Copyright (c) 2008 Magnus Damm | |
| * Copyright (c) 2007 Ujjwal Pande <ujjwal@kenati.com>, | |
| * Kenati Technologies Pvt Ltd. | |
| * | |
| * This file is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public | |
| * License as published by the Free Software Foundation; either | |
| * version 2 of the License, or (at your option) any later version. | |
| * | |
| * This file is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU | |
| * General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public | |
| * License along with this library; if not, write to the Free Software | |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/kernel.h> | |
| #include <linux/input.h> | |
| #include <linux/interrupt.h> | |
| #include <asm/io.h> | |
| #include <linux/i2c.h> | |
| #include <linux/timer.h> | |
| #define EVENT_PENDOWN 1 | |
| #define EVENT_REPEAT 2 | |
| #define EVENT_PENUP 3 | |
| struct migor_ts_priv { | |
| struct i2c_client *client; | |
| struct input_dev *input; | |
| struct delayed_work work; | |
| int irq; | |
| }; | |
| static const u_int8_t migor_ts_ena_seq[17] = { 0x33, 0x22, 0x11, | |
| 0x01, 0x06, 0x07, }; | |
| static const u_int8_t migor_ts_dis_seq[17] = { }; | |
| static void migor_ts_poscheck(struct work_struct *work) | |
| { | |
| struct migor_ts_priv *priv = container_of(work, | |
| struct migor_ts_priv, | |
| work.work); | |
| unsigned short xpos, ypos; | |
| unsigned char event; | |
| u_int8_t buf[16]; | |
| memset(buf, 0, sizeof(buf)); | |
| /* Set Index 0 */ | |
| buf[0] = 0; | |
| if (i2c_master_send(priv->client, buf, 1) != 1) { | |
| dev_err(&priv->client->dev, "Unable to write i2c index\n"); | |
| goto out; | |
| } | |
| /* Now do Page Read */ | |
| if (i2c_master_recv(priv->client, buf, sizeof(buf)) != sizeof(buf)) { | |
| dev_err(&priv->client->dev, "Unable to read i2c page\n"); | |
| goto out; | |
| } | |
| ypos = ((buf[9] & 0x03) << 8 | buf[8]); | |
| xpos = ((buf[11] & 0x03) << 8 | buf[10]); | |
| event = buf[12]; | |
| if (event == EVENT_PENDOWN || event == EVENT_REPEAT) { | |
| input_report_key(priv->input, BTN_TOUCH, 1); | |
| input_report_abs(priv->input, ABS_X, ypos); /*X-Y swap*/ | |
| input_report_abs(priv->input, ABS_Y, xpos); | |
| input_sync(priv->input); | |
| } else if (event == EVENT_PENUP) { | |
| input_report_key(priv->input, BTN_TOUCH, 0); | |
| input_sync(priv->input); | |
| } | |
| out: | |
| enable_irq(priv->irq); | |
| } | |
| static irqreturn_t migor_ts_isr(int irq, void *dev_id) | |
| { | |
| struct migor_ts_priv *priv = dev_id; | |
| /* the touch screen controller chip is hooked up to the cpu | |
| * using i2c and a single interrupt line. the interrupt line | |
| * is pulled low whenever someone taps the screen. to deassert | |
| * the interrupt line we need to acknowledge the interrupt by | |
| * communicating with the controller over the slow i2c bus. | |
| * | |
| * we can't acknowledge from interrupt context since the i2c | |
| * bus controller may sleep, so we just disable the interrupt | |
| * here and handle the acknowledge using delayed work. | |
| */ | |
| disable_irq_nosync(irq); | |
| schedule_delayed_work(&priv->work, HZ / 20); | |
| return IRQ_HANDLED; | |
| } | |
| static int migor_ts_open(struct input_dev *dev) | |
| { | |
| struct migor_ts_priv *priv = input_get_drvdata(dev); | |
| struct i2c_client *client = priv->client; | |
| int count; | |
| /* enable controller */ | |
| count = i2c_master_send(client, migor_ts_ena_seq, | |
| sizeof(migor_ts_ena_seq)); | |
| if (count != sizeof(migor_ts_ena_seq)) { | |
| dev_err(&client->dev, "Unable to enable touchscreen.\n"); | |
| return -ENXIO; | |
| } | |
| return 0; | |
| } | |
| static void migor_ts_close(struct input_dev *dev) | |
| { | |
| struct migor_ts_priv *priv = input_get_drvdata(dev); | |
| struct i2c_client *client = priv->client; | |
| disable_irq(priv->irq); | |
| /* cancel pending work and wait for migor_ts_poscheck() to finish */ | |
| if (cancel_delayed_work_sync(&priv->work)) { | |
| /* | |
| * if migor_ts_poscheck was canceled we need to enable IRQ | |
| * here to balance disable done in migor_ts_isr. | |
| */ | |
| enable_irq(priv->irq); | |
| } | |
| /* disable controller */ | |
| i2c_master_send(client, migor_ts_dis_seq, sizeof(migor_ts_dis_seq)); | |
| enable_irq(priv->irq); | |
| } | |
| static int migor_ts_probe(struct i2c_client *client, | |
| const struct i2c_device_id *idp) | |
| { | |
| struct migor_ts_priv *priv; | |
| struct input_dev *input; | |
| int error; | |
| priv = kzalloc(sizeof(*priv), GFP_KERNEL); | |
| if (!priv) { | |
| dev_err(&client->dev, "failed to allocate driver data\n"); | |
| error = -ENOMEM; | |
| goto err0; | |
| } | |
| dev_set_drvdata(&client->dev, priv); | |
| input = input_allocate_device(); | |
| if (!input) { | |
| dev_err(&client->dev, "Failed to allocate input device.\n"); | |
| error = -ENOMEM; | |
| goto err1; | |
| } | |
| input->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); | |
| input->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); | |
| input_set_abs_params(input, ABS_X, 95, 955, 0, 0); | |
| input_set_abs_params(input, ABS_Y, 85, 935, 0, 0); | |
| input->name = client->name; | |
| input->id.bustype = BUS_I2C; | |
| input->dev.parent = &client->dev; | |
| input->open = migor_ts_open; | |
| input->close = migor_ts_close; | |
| input_set_drvdata(input, priv); | |
| priv->client = client; | |
| priv->input = input; | |
| INIT_DELAYED_WORK(&priv->work, migor_ts_poscheck); | |
| priv->irq = client->irq; | |
| error = input_register_device(input); | |
| if (error) | |
| goto err1; | |
| error = request_irq(priv->irq, migor_ts_isr, IRQF_TRIGGER_LOW, | |
| client->name, priv); | |
| if (error) { | |
| dev_err(&client->dev, "Unable to request touchscreen IRQ.\n"); | |
| goto err2; | |
| } | |
| return 0; | |
| err2: | |
| input_unregister_device(input); | |
| input = NULL; /* so we dont try to free it below */ | |
| err1: | |
| input_free_device(input); | |
| kfree(priv); | |
| err0: | |
| dev_set_drvdata(&client->dev, NULL); | |
| return error; | |
| } | |
| static int migor_ts_remove(struct i2c_client *client) | |
| { | |
| struct migor_ts_priv *priv = dev_get_drvdata(&client->dev); | |
| free_irq(priv->irq, priv); | |
| input_unregister_device(priv->input); | |
| kfree(priv); | |
| dev_set_drvdata(&client->dev, NULL); | |
| return 0; | |
| } | |
| static const struct i2c_device_id migor_ts_id[] = { | |
| { "migor_ts", 0 }, | |
| { } | |
| }; | |
| MODULE_DEVICE_TABLE(i2c, migor_ts); | |
| static struct i2c_driver migor_ts_driver = { | |
| .driver = { | |
| .name = "migor_ts", | |
| }, | |
| .probe = migor_ts_probe, | |
| .remove = migor_ts_remove, | |
| .id_table = migor_ts_id, | |
| }; | |
| static int __init migor_ts_init(void) | |
| { | |
| return i2c_add_driver(&migor_ts_driver); | |
| } | |
| static void __exit migor_ts_exit(void) | |
| { | |
| i2c_del_driver(&migor_ts_driver); | |
| } | |
| MODULE_DESCRIPTION("MigoR Touchscreen driver"); | |
| MODULE_AUTHOR("Magnus Damm <damm@opensource.se>"); | |
| MODULE_LICENSE("GPL"); | |
| module_init(migor_ts_init); | |
| module_exit(migor_ts_exit); |