| /* | |
| * ATAPI support. | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/cdrom.h> | |
| #include <linux/delay.h> | |
| #include <linux/ide.h> | |
| #include <scsi/scsi.h> | |
| #ifdef DEBUG | |
| #define debug_log(fmt, args...) \ | |
| printk(KERN_INFO "ide: " fmt, ## args) | |
| #else | |
| #define debug_log(fmt, args...) do {} while (0) | |
| #endif | |
| #define ATAPI_MIN_CDB_BYTES 12 | |
| static inline int dev_is_idecd(ide_drive_t *drive) | |
| { | |
| return drive->media == ide_cdrom || drive->media == ide_optical; | |
| } | |
| /* | |
| * Check whether we can support a device, | |
| * based on the ATAPI IDENTIFY command results. | |
| */ | |
| int ide_check_atapi_device(ide_drive_t *drive, const char *s) | |
| { | |
| u16 *id = drive->id; | |
| u8 gcw[2], protocol, device_type, removable, drq_type, packet_size; | |
| *((u16 *)&gcw) = id[ATA_ID_CONFIG]; | |
| protocol = (gcw[1] & 0xC0) >> 6; | |
| device_type = gcw[1] & 0x1F; | |
| removable = (gcw[0] & 0x80) >> 7; | |
| drq_type = (gcw[0] & 0x60) >> 5; | |
| packet_size = gcw[0] & 0x03; | |
| #ifdef CONFIG_PPC | |
| /* kludge for Apple PowerBook internal zip */ | |
| if (drive->media == ide_floppy && device_type == 5 && | |
| !strstr((char *)&id[ATA_ID_PROD], "CD-ROM") && | |
| strstr((char *)&id[ATA_ID_PROD], "ZIP")) | |
| device_type = 0; | |
| #endif | |
| if (protocol != 2) | |
| printk(KERN_ERR "%s: %s: protocol (0x%02x) is not ATAPI\n", | |
| s, drive->name, protocol); | |
| else if ((drive->media == ide_floppy && device_type != 0) || | |
| (drive->media == ide_tape && device_type != 1)) | |
| printk(KERN_ERR "%s: %s: invalid device type (0x%02x)\n", | |
| s, drive->name, device_type); | |
| else if (removable == 0) | |
| printk(KERN_ERR "%s: %s: the removable flag is not set\n", | |
| s, drive->name); | |
| else if (drive->media == ide_floppy && drq_type == 3) | |
| printk(KERN_ERR "%s: %s: sorry, DRQ type (0x%02x) not " | |
| "supported\n", s, drive->name, drq_type); | |
| else if (packet_size != 0) | |
| printk(KERN_ERR "%s: %s: packet size (0x%02x) is not 12 " | |
| "bytes\n", s, drive->name, packet_size); | |
| else | |
| return 1; | |
| return 0; | |
| } | |
| EXPORT_SYMBOL_GPL(ide_check_atapi_device); | |
| /* PIO data transfer routine using the scatter gather table. */ | |
| int ide_io_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc, | |
| unsigned int bcount, int write) | |
| { | |
| ide_hwif_t *hwif = drive->hwif; | |
| const struct ide_tp_ops *tp_ops = hwif->tp_ops; | |
| xfer_func_t *xf = write ? tp_ops->output_data : tp_ops->input_data; | |
| struct scatterlist *sg = pc->sg; | |
| char *buf; | |
| int count, done = 0; | |
| while (bcount) { | |
| count = min(sg->length - pc->b_count, bcount); | |
| if (PageHighMem(sg_page(sg))) { | |
| unsigned long flags; | |
| local_irq_save(flags); | |
| buf = kmap_atomic(sg_page(sg), KM_IRQ0) + sg->offset; | |
| xf(drive, NULL, buf + pc->b_count, count); | |
| kunmap_atomic(buf - sg->offset, KM_IRQ0); | |
| local_irq_restore(flags); | |
| } else { | |
| buf = sg_virt(sg); | |
| xf(drive, NULL, buf + pc->b_count, count); | |
| } | |
| bcount -= count; | |
| pc->b_count += count; | |
| done += count; | |
| if (pc->b_count == sg->length) { | |
| if (!--pc->sg_cnt) | |
| break; | |
| pc->sg = sg = sg_next(sg); | |
| pc->b_count = 0; | |
| } | |
| } | |
| if (bcount) { | |
| printk(KERN_ERR "%s: %d leftover bytes, %s\n", drive->name, | |
| bcount, write ? "padding with zeros" | |
| : "discarding data"); | |
| ide_pad_transfer(drive, write, bcount); | |
| } | |
| return done; | |
| } | |
| EXPORT_SYMBOL_GPL(ide_io_buffers); | |
| void ide_init_pc(struct ide_atapi_pc *pc) | |
| { | |
| memset(pc, 0, sizeof(*pc)); | |
| pc->buf = pc->pc_buf; | |
| pc->buf_size = IDE_PC_BUFFER_SIZE; | |
| } | |
| EXPORT_SYMBOL_GPL(ide_init_pc); | |
| /* | |
| * Generate a new packet command request in front of the request queue, before | |
| * the current request, so that it will be processed immediately, on the next | |
| * pass through the driver. | |
| */ | |
| static void ide_queue_pc_head(ide_drive_t *drive, struct gendisk *disk, | |
| struct ide_atapi_pc *pc, struct request *rq) | |
| { | |
| blk_rq_init(NULL, rq); | |
| rq->cmd_type = REQ_TYPE_SPECIAL; | |
| rq->cmd_flags |= REQ_PREEMPT; | |
| rq->buffer = (char *)pc; | |
| rq->rq_disk = disk; | |
| memcpy(rq->cmd, pc->c, 12); | |
| if (drive->media == ide_tape) | |
| rq->cmd[13] = REQ_IDETAPE_PC1; | |
| ide_do_drive_cmd(drive, rq); | |
| } | |
| /* | |
| * Add a special packet command request to the tail of the request queue, | |
| * and wait for it to be serviced. | |
| */ | |
| int ide_queue_pc_tail(ide_drive_t *drive, struct gendisk *disk, | |
| struct ide_atapi_pc *pc) | |
| { | |
| struct request *rq; | |
| int error; | |
| rq = blk_get_request(drive->queue, READ, __GFP_WAIT); | |
| rq->cmd_type = REQ_TYPE_SPECIAL; | |
| rq->buffer = (char *)pc; | |
| memcpy(rq->cmd, pc->c, 12); | |
| if (drive->media == ide_tape) | |
| rq->cmd[13] = REQ_IDETAPE_PC1; | |
| error = blk_execute_rq(drive->queue, disk, rq, 0); | |
| blk_put_request(rq); | |
| return error; | |
| } | |
| EXPORT_SYMBOL_GPL(ide_queue_pc_tail); | |
| int ide_do_test_unit_ready(ide_drive_t *drive, struct gendisk *disk) | |
| { | |
| struct ide_atapi_pc pc; | |
| ide_init_pc(&pc); | |
| pc.c[0] = TEST_UNIT_READY; | |
| return ide_queue_pc_tail(drive, disk, &pc); | |
| } | |
| EXPORT_SYMBOL_GPL(ide_do_test_unit_ready); | |
| int ide_do_start_stop(ide_drive_t *drive, struct gendisk *disk, int start) | |
| { | |
| struct ide_atapi_pc pc; | |
| ide_init_pc(&pc); | |
| pc.c[0] = START_STOP; | |
| pc.c[4] = start; | |
| if (drive->media == ide_tape) | |
| pc.flags |= PC_FLAG_WAIT_FOR_DSC; | |
| return ide_queue_pc_tail(drive, disk, &pc); | |
| } | |
| EXPORT_SYMBOL_GPL(ide_do_start_stop); | |
| int ide_set_media_lock(ide_drive_t *drive, struct gendisk *disk, int on) | |
| { | |
| struct ide_atapi_pc pc; | |
| if ((drive->dev_flags & IDE_DFLAG_DOORLOCKING) == 0) | |
| return 0; | |
| ide_init_pc(&pc); | |
| pc.c[0] = ALLOW_MEDIUM_REMOVAL; | |
| pc.c[4] = on; | |
| return ide_queue_pc_tail(drive, disk, &pc); | |
| } | |
| EXPORT_SYMBOL_GPL(ide_set_media_lock); | |
| void ide_create_request_sense_cmd(ide_drive_t *drive, struct ide_atapi_pc *pc) | |
| { | |
| ide_init_pc(pc); | |
| pc->c[0] = REQUEST_SENSE; | |
| if (drive->media == ide_floppy) { | |
| pc->c[4] = 255; | |
| pc->req_xfer = 18; | |
| } else { | |
| pc->c[4] = 20; | |
| pc->req_xfer = 20; | |
| } | |
| } | |
| EXPORT_SYMBOL_GPL(ide_create_request_sense_cmd); | |
| /* | |
| * Called when an error was detected during the last packet command. | |
| * We queue a request sense packet command in the head of the request list. | |
| */ | |
| void ide_retry_pc(ide_drive_t *drive, struct gendisk *disk) | |
| { | |
| struct request *rq = &drive->request_sense_rq; | |
| struct ide_atapi_pc *pc = &drive->request_sense_pc; | |
| (void)ide_read_error(drive); | |
| ide_create_request_sense_cmd(drive, pc); | |
| if (drive->media == ide_tape) | |
| set_bit(IDE_AFLAG_IGNORE_DSC, &drive->atapi_flags); | |
| ide_queue_pc_head(drive, disk, pc, rq); | |
| } | |
| EXPORT_SYMBOL_GPL(ide_retry_pc); | |
| int ide_cd_expiry(ide_drive_t *drive) | |
| { | |
| struct request *rq = drive->hwif->rq; | |
| unsigned long wait = 0; | |
| debug_log("%s: rq->cmd[0]: 0x%x\n", __func__, rq->cmd[0]); | |
| /* | |
| * Some commands are *slow* and normally take a long time to complete. | |
| * Usually we can use the ATAPI "disconnect" to bypass this, but not all | |
| * commands/drives support that. Let ide_timer_expiry keep polling us | |
| * for these. | |
| */ | |
| switch (rq->cmd[0]) { | |
| case GPCMD_BLANK: | |
| case GPCMD_FORMAT_UNIT: | |
| case GPCMD_RESERVE_RZONE_TRACK: | |
| case GPCMD_CLOSE_TRACK: | |
| case GPCMD_FLUSH_CACHE: | |
| wait = ATAPI_WAIT_PC; | |
| break; | |
| default: | |
| if (!(rq->cmd_flags & REQ_QUIET)) | |
| printk(KERN_INFO "cmd 0x%x timed out\n", | |
| rq->cmd[0]); | |
| wait = 0; | |
| break; | |
| } | |
| return wait; | |
| } | |
| EXPORT_SYMBOL_GPL(ide_cd_expiry); | |
| int ide_cd_get_xferlen(struct request *rq) | |
| { | |
| if (blk_fs_request(rq)) | |
| return 32768; | |
| else if (blk_sense_request(rq) || blk_pc_request(rq) || | |
| rq->cmd_type == REQ_TYPE_ATA_PC) | |
| return rq->data_len; | |
| else | |
| return 0; | |
| } | |
| EXPORT_SYMBOL_GPL(ide_cd_get_xferlen); | |
| /* | |
| * This is the usual interrupt handler which will be called during a packet | |
| * command. We will transfer some of the data (as requested by the drive) | |
| * and will re-point interrupt handler to us. | |
| */ | |
| static ide_startstop_t ide_pc_intr(ide_drive_t *drive) | |
| { | |
| struct ide_atapi_pc *pc = drive->pc; | |
| ide_hwif_t *hwif = drive->hwif; | |
| struct request *rq = hwif->rq; | |
| const struct ide_tp_ops *tp_ops = hwif->tp_ops; | |
| xfer_func_t *xferfunc; | |
| unsigned int timeout, temp; | |
| u16 bcount; | |
| u8 stat, ireason, dsc = 0; | |
| debug_log("Enter %s - interrupt handler\n", __func__); | |
| timeout = (drive->media == ide_floppy) ? WAIT_FLOPPY_CMD | |
| : WAIT_TAPE_CMD; | |
| if (pc->flags & PC_FLAG_TIMEDOUT) { | |
| drive->pc_callback(drive, 0); | |
| return ide_stopped; | |
| } | |
| /* Clear the interrupt */ | |
| stat = tp_ops->read_status(hwif); | |
| if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) { | |
| if (hwif->dma_ops->dma_end(drive) || | |
| (drive->media == ide_tape && (stat & ATA_ERR))) { | |
| if (drive->media == ide_floppy) | |
| printk(KERN_ERR "%s: DMA %s error\n", | |
| drive->name, rq_data_dir(pc->rq) | |
| ? "write" : "read"); | |
| pc->flags |= PC_FLAG_DMA_ERROR; | |
| } else { | |
| pc->xferred = pc->req_xfer; | |
| if (drive->pc_update_buffers) | |
| drive->pc_update_buffers(drive, pc); | |
| } | |
| debug_log("%s: DMA finished\n", drive->name); | |
| } | |
| /* No more interrupts */ | |
| if ((stat & ATA_DRQ) == 0) { | |
| debug_log("Packet command completed, %d bytes transferred\n", | |
| pc->xferred); | |
| pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS; | |
| local_irq_enable_in_hardirq(); | |
| if (drive->media == ide_tape && | |
| (stat & ATA_ERR) && rq->cmd[0] == REQUEST_SENSE) | |
| stat &= ~ATA_ERR; | |
| if ((stat & ATA_ERR) || (pc->flags & PC_FLAG_DMA_ERROR)) { | |
| /* Error detected */ | |
| debug_log("%s: I/O error\n", drive->name); | |
| if (drive->media != ide_tape) | |
| pc->rq->errors++; | |
| if (rq->cmd[0] == REQUEST_SENSE) { | |
| printk(KERN_ERR "%s: I/O error in request sense" | |
| " command\n", drive->name); | |
| return ide_do_reset(drive); | |
| } | |
| debug_log("[cmd %x]: check condition\n", rq->cmd[0]); | |
| /* Retry operation */ | |
| ide_retry_pc(drive, rq->rq_disk); | |
| /* queued, but not started */ | |
| return ide_stopped; | |
| } | |
| pc->error = 0; | |
| if ((pc->flags & PC_FLAG_WAIT_FOR_DSC) && (stat & ATA_DSC) == 0) | |
| dsc = 1; | |
| /* Command finished - Call the callback function */ | |
| drive->pc_callback(drive, dsc); | |
| return ide_stopped; | |
| } | |
| if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) { | |
| pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS; | |
| printk(KERN_ERR "%s: The device wants to issue more interrupts " | |
| "in DMA mode\n", drive->name); | |
| ide_dma_off(drive); | |
| return ide_do_reset(drive); | |
| } | |
| /* Get the number of bytes to transfer on this interrupt. */ | |
| ide_read_bcount_and_ireason(drive, &bcount, &ireason); | |
| if (ireason & ATAPI_COD) { | |
| printk(KERN_ERR "%s: CoD != 0 in %s\n", drive->name, __func__); | |
| return ide_do_reset(drive); | |
| } | |
| if (((ireason & ATAPI_IO) == ATAPI_IO) == | |
| !!(pc->flags & PC_FLAG_WRITING)) { | |
| /* Hopefully, we will never get here */ | |
| printk(KERN_ERR "%s: We wanted to %s, but the device wants us " | |
| "to %s!\n", drive->name, | |
| (ireason & ATAPI_IO) ? "Write" : "Read", | |
| (ireason & ATAPI_IO) ? "Read" : "Write"); | |
| return ide_do_reset(drive); | |
| } | |
| if (!(pc->flags & PC_FLAG_WRITING)) { | |
| /* Reading - Check that we have enough space */ | |
| temp = pc->xferred + bcount; | |
| if (temp > pc->req_xfer) { | |
| if (temp > pc->buf_size) { | |
| printk(KERN_ERR "%s: The device wants to send " | |
| "us more data than expected - " | |
| "discarding data\n", | |
| drive->name); | |
| ide_pad_transfer(drive, 0, bcount); | |
| goto next_irq; | |
| } | |
| debug_log("The device wants to send us more data than " | |
| "expected - allowing transfer\n"); | |
| } | |
| xferfunc = tp_ops->input_data; | |
| } else | |
| xferfunc = tp_ops->output_data; | |
| if ((drive->media == ide_floppy && !pc->buf) || | |
| (drive->media == ide_tape && pc->bh)) { | |
| int done = drive->pc_io_buffers(drive, pc, bcount, | |
| !!(pc->flags & PC_FLAG_WRITING)); | |
| /* FIXME: don't do partial completions */ | |
| if (drive->media == ide_floppy) | |
| ide_end_request(drive, 1, done >> 9); | |
| } else | |
| xferfunc(drive, NULL, pc->cur_pos, bcount); | |
| /* Update the current position */ | |
| pc->xferred += bcount; | |
| pc->cur_pos += bcount; | |
| debug_log("[cmd %x] transferred %d bytes on that intr.\n", | |
| rq->cmd[0], bcount); | |
| next_irq: | |
| /* And set the interrupt handler again */ | |
| ide_set_handler(drive, ide_pc_intr, timeout, NULL); | |
| return ide_started; | |
| } | |
| static u8 ide_read_ireason(ide_drive_t *drive) | |
| { | |
| ide_task_t task; | |
| memset(&task, 0, sizeof(task)); | |
| task.tf_flags = IDE_TFLAG_IN_NSECT; | |
| drive->hwif->tp_ops->tf_read(drive, &task); | |
| return task.tf.nsect & 3; | |
| } | |
| static u8 ide_wait_ireason(ide_drive_t *drive, u8 ireason) | |
| { | |
| int retries = 100; | |
| while (retries-- && ((ireason & ATAPI_COD) == 0 || | |
| (ireason & ATAPI_IO))) { | |
| printk(KERN_ERR "%s: (IO,CoD != (0,1) while issuing " | |
| "a packet command, retrying\n", drive->name); | |
| udelay(100); | |
| ireason = ide_read_ireason(drive); | |
| if (retries == 0) { | |
| printk(KERN_ERR "%s: (IO,CoD != (0,1) while issuing " | |
| "a packet command, ignoring\n", | |
| drive->name); | |
| ireason |= ATAPI_COD; | |
| ireason &= ~ATAPI_IO; | |
| } | |
| } | |
| return ireason; | |
| } | |
| static int ide_delayed_transfer_pc(ide_drive_t *drive) | |
| { | |
| /* Send the actual packet */ | |
| drive->hwif->tp_ops->output_data(drive, NULL, drive->pc->c, 12); | |
| /* Timeout for the packet command */ | |
| return WAIT_FLOPPY_CMD; | |
| } | |
| static ide_startstop_t ide_transfer_pc(ide_drive_t *drive) | |
| { | |
| struct ide_atapi_pc *uninitialized_var(pc); | |
| ide_hwif_t *hwif = drive->hwif; | |
| struct request *rq = hwif->rq; | |
| ide_expiry_t *expiry; | |
| unsigned int timeout; | |
| int cmd_len; | |
| ide_startstop_t startstop; | |
| u8 ireason; | |
| if (ide_wait_stat(&startstop, drive, ATA_DRQ, ATA_BUSY, WAIT_READY)) { | |
| printk(KERN_ERR "%s: Strange, packet command initiated yet " | |
| "DRQ isn't asserted\n", drive->name); | |
| return startstop; | |
| } | |
| if (drive->atapi_flags & IDE_AFLAG_DRQ_INTERRUPT) { | |
| if (drive->dma) | |
| drive->waiting_for_dma = 1; | |
| } | |
| if (dev_is_idecd(drive)) { | |
| /* ATAPI commands get padded out to 12 bytes minimum */ | |
| cmd_len = COMMAND_SIZE(rq->cmd[0]); | |
| if (cmd_len < ATAPI_MIN_CDB_BYTES) | |
| cmd_len = ATAPI_MIN_CDB_BYTES; | |
| timeout = rq->timeout; | |
| expiry = ide_cd_expiry; | |
| } else { | |
| pc = drive->pc; | |
| cmd_len = ATAPI_MIN_CDB_BYTES; | |
| /* | |
| * If necessary schedule the packet transfer to occur 'timeout' | |
| * miliseconds later in ide_delayed_transfer_pc() after the | |
| * device says it's ready for a packet. | |
| */ | |
| if (drive->atapi_flags & IDE_AFLAG_ZIP_DRIVE) { | |
| timeout = drive->pc_delay; | |
| expiry = &ide_delayed_transfer_pc; | |
| } else { | |
| timeout = (drive->media == ide_floppy) ? WAIT_FLOPPY_CMD | |
| : WAIT_TAPE_CMD; | |
| expiry = NULL; | |
| } | |
| ireason = ide_read_ireason(drive); | |
| if (drive->media == ide_tape) | |
| ireason = ide_wait_ireason(drive, ireason); | |
| if ((ireason & ATAPI_COD) == 0 || (ireason & ATAPI_IO)) { | |
| printk(KERN_ERR "%s: (IO,CoD) != (0,1) while issuing " | |
| "a packet command\n", drive->name); | |
| return ide_do_reset(drive); | |
| } | |
| } | |
| /* Set the interrupt routine */ | |
| ide_set_handler(drive, | |
| (dev_is_idecd(drive) ? drive->irq_handler | |
| : ide_pc_intr), | |
| timeout, expiry); | |
| /* Begin DMA, if necessary */ | |
| if (dev_is_idecd(drive)) { | |
| if (drive->dma) | |
| hwif->dma_ops->dma_start(drive); | |
| } else { | |
| if (pc->flags & PC_FLAG_DMA_OK) { | |
| pc->flags |= PC_FLAG_DMA_IN_PROGRESS; | |
| hwif->dma_ops->dma_start(drive); | |
| } | |
| } | |
| /* Send the actual packet */ | |
| if ((drive->atapi_flags & IDE_AFLAG_ZIP_DRIVE) == 0) | |
| hwif->tp_ops->output_data(drive, NULL, rq->cmd, cmd_len); | |
| return ide_started; | |
| } | |
| ide_startstop_t ide_issue_pc(ide_drive_t *drive) | |
| { | |
| struct ide_atapi_pc *pc; | |
| ide_hwif_t *hwif = drive->hwif; | |
| ide_expiry_t *expiry = NULL; | |
| unsigned int timeout; | |
| u32 tf_flags; | |
| u16 bcount; | |
| if (dev_is_idecd(drive)) { | |
| tf_flags = IDE_TFLAG_OUT_NSECT | IDE_TFLAG_OUT_LBAL; | |
| bcount = ide_cd_get_xferlen(hwif->rq); | |
| expiry = ide_cd_expiry; | |
| timeout = ATAPI_WAIT_PC; | |
| if (drive->dma) | |
| drive->dma = !hwif->dma_ops->dma_setup(drive); | |
| } else { | |
| pc = drive->pc; | |
| /* We haven't transferred any data yet */ | |
| pc->xferred = 0; | |
| pc->cur_pos = pc->buf; | |
| tf_flags = IDE_TFLAG_OUT_DEVICE; | |
| bcount = ((drive->media == ide_tape) ? | |
| pc->req_xfer : | |
| min(pc->req_xfer, 63 * 1024)); | |
| if (pc->flags & PC_FLAG_DMA_ERROR) { | |
| pc->flags &= ~PC_FLAG_DMA_ERROR; | |
| ide_dma_off(drive); | |
| } | |
| if ((pc->flags & PC_FLAG_DMA_OK) && | |
| (drive->dev_flags & IDE_DFLAG_USING_DMA)) | |
| drive->dma = !hwif->dma_ops->dma_setup(drive); | |
| if (!drive->dma) | |
| pc->flags &= ~PC_FLAG_DMA_OK; | |
| timeout = (drive->media == ide_floppy) ? WAIT_FLOPPY_CMD | |
| : WAIT_TAPE_CMD; | |
| } | |
| ide_pktcmd_tf_load(drive, tf_flags, bcount, drive->dma); | |
| /* Issue the packet command */ | |
| if (drive->atapi_flags & IDE_AFLAG_DRQ_INTERRUPT) { | |
| if (drive->dma) | |
| drive->waiting_for_dma = 0; | |
| ide_execute_command(drive, ATA_CMD_PACKET, ide_transfer_pc, | |
| timeout, expiry); | |
| return ide_started; | |
| } else { | |
| ide_execute_pkt_cmd(drive); | |
| return ide_transfer_pc(drive); | |
| } | |
| } | |
| EXPORT_SYMBOL_GPL(ide_issue_pc); |