| /* | |
| * Code for replacing ftrace calls with jumps. | |
| * | |
| * Copyright (C) 2007-2008 Steven Rostedt <srostedt@redhat.com> | |
| * | |
| * Thanks goes out to P.A. Semi, Inc for supplying me with a PPC64 box. | |
| * | |
| */ | |
| #include <linux/spinlock.h> | |
| #include <linux/hardirq.h> | |
| #include <linux/uaccess.h> | |
| #include <linux/module.h> | |
| #include <linux/ftrace.h> | |
| #include <linux/percpu.h> | |
| #include <linux/init.h> | |
| #include <linux/list.h> | |
| #include <asm/cacheflush.h> | |
| #include <asm/code-patching.h> | |
| #include <asm/ftrace.h> | |
| #if 0 | |
| #define DEBUGP printk | |
| #else | |
| #define DEBUGP(fmt , ...) do { } while (0) | |
| #endif | |
| static unsigned int ftrace_nop = PPC_NOP_INSTR; | |
| #ifdef CONFIG_PPC32 | |
| # define GET_ADDR(addr) addr | |
| #else | |
| /* PowerPC64's functions are data that points to the functions */ | |
| # define GET_ADDR(addr) (*(unsigned long *)addr) | |
| #endif | |
| static unsigned int ftrace_calc_offset(long ip, long addr) | |
| { | |
| return (int)(addr - ip); | |
| } | |
| static unsigned char *ftrace_nop_replace(void) | |
| { | |
| return (char *)&ftrace_nop; | |
| } | |
| static unsigned char *ftrace_call_replace(unsigned long ip, unsigned long addr) | |
| { | |
| static unsigned int op; | |
| /* | |
| * It would be nice to just use create_function_call, but that will | |
| * update the code itself. Here we need to just return the | |
| * instruction that is going to be modified, without modifying the | |
| * code. | |
| */ | |
| addr = GET_ADDR(addr); | |
| /* Set to "bl addr" */ | |
| op = 0x48000001 | (ftrace_calc_offset(ip, addr) & 0x03fffffc); | |
| /* | |
| * No locking needed, this must be called via kstop_machine | |
| * which in essence is like running on a uniprocessor machine. | |
| */ | |
| return (unsigned char *)&op; | |
| } | |
| #ifdef CONFIG_PPC64 | |
| # define _ASM_ALIGN " .align 3 " | |
| # define _ASM_PTR " .llong " | |
| #else | |
| # define _ASM_ALIGN " .align 2 " | |
| # define _ASM_PTR " .long " | |
| #endif | |
| static int | |
| ftrace_modify_code(unsigned long ip, unsigned char *old_code, | |
| unsigned char *new_code) | |
| { | |
| unsigned char replaced[MCOUNT_INSN_SIZE]; | |
| /* | |
| * Note: Due to modules and __init, code can | |
| * disappear and change, we need to protect against faulting | |
| * as well as code changing. We do this by using the | |
| * probe_kernel_* functions. | |
| * | |
| * No real locking needed, this code is run through | |
| * kstop_machine, or before SMP starts. | |
| */ | |
| /* read the text we want to modify */ | |
| if (probe_kernel_read(replaced, (void *)ip, MCOUNT_INSN_SIZE)) | |
| return -EFAULT; | |
| /* Make sure it is what we expect it to be */ | |
| if (memcmp(replaced, old_code, MCOUNT_INSN_SIZE) != 0) | |
| return -EINVAL; | |
| /* replace the text with the new text */ | |
| if (probe_kernel_write((void *)ip, new_code, MCOUNT_INSN_SIZE)) | |
| return -EPERM; | |
| flush_icache_range(ip, ip + 8); | |
| return 0; | |
| } | |
| /* | |
| * Helper functions that are the same for both PPC64 and PPC32. | |
| */ | |
| static int test_24bit_addr(unsigned long ip, unsigned long addr) | |
| { | |
| /* use the create_branch to verify that this offset can be branched */ | |
| return create_branch((unsigned int *)ip, addr, 0); | |
| } | |
| static int is_bl_op(unsigned int op) | |
| { | |
| return (op & 0xfc000003) == 0x48000001; | |
| } | |
| static unsigned long find_bl_target(unsigned long ip, unsigned int op) | |
| { | |
| static int offset; | |
| offset = (op & 0x03fffffc); | |
| /* make it signed */ | |
| if (offset & 0x02000000) | |
| offset |= 0xfe000000; | |
| return ip + (long)offset; | |
| } | |
| #ifdef CONFIG_PPC64 | |
| static int | |
| __ftrace_make_nop(struct module *mod, | |
| struct dyn_ftrace *rec, unsigned long addr) | |
| { | |
| unsigned int op; | |
| unsigned int jmp[5]; | |
| unsigned long ptr; | |
| unsigned long ip = rec->ip; | |
| unsigned long tramp; | |
| int offset; | |
| /* read where this goes */ | |
| if (probe_kernel_read(&op, (void *)ip, sizeof(int))) | |
| return -EFAULT; | |
| /* Make sure that that this is still a 24bit jump */ | |
| if (!is_bl_op(op)) { | |
| printk(KERN_ERR "Not expected bl: opcode is %x\n", op); | |
| return -EINVAL; | |
| } | |
| /* lets find where the pointer goes */ | |
| tramp = find_bl_target(ip, op); | |
| /* | |
| * On PPC64 the trampoline looks like: | |
| * 0x3d, 0x82, 0x00, 0x00, addis r12,r2, <high> | |
| * 0x39, 0x8c, 0x00, 0x00, addi r12,r12, <low> | |
| * Where the bytes 2,3,6 and 7 make up the 32bit offset | |
| * to the TOC that holds the pointer. | |
| * to jump to. | |
| * 0xf8, 0x41, 0x00, 0x28, std r2,40(r1) | |
| * 0xe9, 0x6c, 0x00, 0x20, ld r11,32(r12) | |
| * The actually address is 32 bytes from the offset | |
| * into the TOC. | |
| * 0xe8, 0x4c, 0x00, 0x28, ld r2,40(r12) | |
| */ | |
| DEBUGP("ip:%lx jumps to %lx r2: %lx", ip, tramp, mod->arch.toc); | |
| /* Find where the trampoline jumps to */ | |
| if (probe_kernel_read(jmp, (void *)tramp, sizeof(jmp))) { | |
| printk(KERN_ERR "Failed to read %lx\n", tramp); | |
| return -EFAULT; | |
| } | |
| DEBUGP(" %08x %08x", jmp[0], jmp[1]); | |
| /* verify that this is what we expect it to be */ | |
| if (((jmp[0] & 0xffff0000) != 0x3d820000) || | |
| ((jmp[1] & 0xffff0000) != 0x398c0000) || | |
| (jmp[2] != 0xf8410028) || | |
| (jmp[3] != 0xe96c0020) || | |
| (jmp[4] != 0xe84c0028)) { | |
| printk(KERN_ERR "Not a trampoline\n"); | |
| return -EINVAL; | |
| } | |
| /* The bottom half is signed extended */ | |
| offset = ((unsigned)((unsigned short)jmp[0]) << 16) + | |
| (int)((short)jmp[1]); | |
| DEBUGP(" %x ", offset); | |
| /* get the address this jumps too */ | |
| tramp = mod->arch.toc + offset + 32; | |
| DEBUGP("toc: %lx", tramp); | |
| if (probe_kernel_read(jmp, (void *)tramp, 8)) { | |
| printk(KERN_ERR "Failed to read %lx\n", tramp); | |
| return -EFAULT; | |
| } | |
| DEBUGP(" %08x %08x\n", jmp[0], jmp[1]); | |
| ptr = ((unsigned long)jmp[0] << 32) + jmp[1]; | |
| /* This should match what was called */ | |
| if (ptr != GET_ADDR(addr)) { | |
| printk(KERN_ERR "addr does not match %lx\n", ptr); | |
| return -EINVAL; | |
| } | |
| /* | |
| * We want to nop the line, but the next line is | |
| * 0xe8, 0x41, 0x00, 0x28 ld r2,40(r1) | |
| * This needs to be turned to a nop too. | |
| */ | |
| if (probe_kernel_read(&op, (void *)(ip+4), MCOUNT_INSN_SIZE)) | |
| return -EFAULT; | |
| if (op != 0xe8410028) { | |
| printk(KERN_ERR "Next line is not ld! (%08x)\n", op); | |
| return -EINVAL; | |
| } | |
| /* | |
| * Milton Miller pointed out that we can not blindly do nops. | |
| * If a task was preempted when calling a trace function, | |
| * the nops will remove the way to restore the TOC in r2 | |
| * and the r2 TOC will get corrupted. | |
| */ | |
| /* | |
| * Replace: | |
| * bl <tramp> <==== will be replaced with "b 1f" | |
| * ld r2,40(r1) | |
| * 1: | |
| */ | |
| op = 0x48000008; /* b +8 */ | |
| if (probe_kernel_write((void *)ip, &op, MCOUNT_INSN_SIZE)) | |
| return -EPERM; | |
| flush_icache_range(ip, ip + 8); | |
| return 0; | |
| } | |
| #else /* !PPC64 */ | |
| static int | |
| __ftrace_make_nop(struct module *mod, | |
| struct dyn_ftrace *rec, unsigned long addr) | |
| { | |
| unsigned int op; | |
| unsigned int jmp[4]; | |
| unsigned long ip = rec->ip; | |
| unsigned long tramp; | |
| if (probe_kernel_read(&op, (void *)ip, MCOUNT_INSN_SIZE)) | |
| return -EFAULT; | |
| /* Make sure that that this is still a 24bit jump */ | |
| if (!is_bl_op(op)) { | |
| printk(KERN_ERR "Not expected bl: opcode is %x\n", op); | |
| return -EINVAL; | |
| } | |
| /* lets find where the pointer goes */ | |
| tramp = find_bl_target(ip, op); | |
| /* | |
| * On PPC32 the trampoline looks like: | |
| * 0x3d, 0x60, 0x00, 0x00 lis r11,sym@ha | |
| * 0x39, 0x6b, 0x00, 0x00 addi r11,r11,sym@l | |
| * 0x7d, 0x69, 0x03, 0xa6 mtctr r11 | |
| * 0x4e, 0x80, 0x04, 0x20 bctr | |
| */ | |
| DEBUGP("ip:%lx jumps to %lx", ip, tramp); | |
| /* Find where the trampoline jumps to */ | |
| if (probe_kernel_read(jmp, (void *)tramp, sizeof(jmp))) { | |
| printk(KERN_ERR "Failed to read %lx\n", tramp); | |
| return -EFAULT; | |
| } | |
| DEBUGP(" %08x %08x ", jmp[0], jmp[1]); | |
| /* verify that this is what we expect it to be */ | |
| if (((jmp[0] & 0xffff0000) != 0x3d600000) || | |
| ((jmp[1] & 0xffff0000) != 0x396b0000) || | |
| (jmp[2] != 0x7d6903a6) || | |
| (jmp[3] != 0x4e800420)) { | |
| printk(KERN_ERR "Not a trampoline\n"); | |
| return -EINVAL; | |
| } | |
| tramp = (jmp[1] & 0xffff) | | |
| ((jmp[0] & 0xffff) << 16); | |
| if (tramp & 0x8000) | |
| tramp -= 0x10000; | |
| DEBUGP(" %x ", tramp); | |
| if (tramp != addr) { | |
| printk(KERN_ERR | |
| "Trampoline location %08lx does not match addr\n", | |
| tramp); | |
| return -EINVAL; | |
| } | |
| op = PPC_NOP_INSTR; | |
| if (probe_kernel_write((void *)ip, &op, MCOUNT_INSN_SIZE)) | |
| return -EPERM; | |
| flush_icache_range(ip, ip + 8); | |
| return 0; | |
| } | |
| #endif /* PPC64 */ | |
| int ftrace_make_nop(struct module *mod, | |
| struct dyn_ftrace *rec, unsigned long addr) | |
| { | |
| unsigned char *old, *new; | |
| unsigned long ip = rec->ip; | |
| /* | |
| * If the calling address is more that 24 bits away, | |
| * then we had to use a trampoline to make the call. | |
| * Otherwise just update the call site. | |
| */ | |
| if (test_24bit_addr(ip, addr)) { | |
| /* within range */ | |
| old = ftrace_call_replace(ip, addr); | |
| new = ftrace_nop_replace(); | |
| return ftrace_modify_code(ip, old, new); | |
| } | |
| /* | |
| * Out of range jumps are called from modules. | |
| * We should either already have a pointer to the module | |
| * or it has been passed in. | |
| */ | |
| if (!rec->arch.mod) { | |
| if (!mod) { | |
| printk(KERN_ERR "No module loaded addr=%lx\n", | |
| addr); | |
| return -EFAULT; | |
| } | |
| rec->arch.mod = mod; | |
| } else if (mod) { | |
| if (mod != rec->arch.mod) { | |
| printk(KERN_ERR | |
| "Record mod %p not equal to passed in mod %p\n", | |
| rec->arch.mod, mod); | |
| return -EINVAL; | |
| } | |
| /* nothing to do if mod == rec->arch.mod */ | |
| } else | |
| mod = rec->arch.mod; | |
| return __ftrace_make_nop(mod, rec, addr); | |
| } | |
| #ifdef CONFIG_PPC64 | |
| static int | |
| __ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr) | |
| { | |
| unsigned int op[2]; | |
| unsigned long ip = rec->ip; | |
| /* read where this goes */ | |
| if (probe_kernel_read(op, (void *)ip, MCOUNT_INSN_SIZE * 2)) | |
| return -EFAULT; | |
| /* | |
| * It should be pointing to two nops or | |
| * b +8; ld r2,40(r1) | |
| */ | |
| if (((op[0] != 0x48000008) || (op[1] != 0xe8410028)) && | |
| ((op[0] != PPC_NOP_INSTR) || (op[1] != PPC_NOP_INSTR))) { | |
| printk(KERN_ERR "Expected NOPs but have %x %x\n", op[0], op[1]); | |
| return -EINVAL; | |
| } | |
| /* If we never set up a trampoline to ftrace_caller, then bail */ | |
| if (!rec->arch.mod->arch.tramp) { | |
| printk(KERN_ERR "No ftrace trampoline\n"); | |
| return -EINVAL; | |
| } | |
| /* create the branch to the trampoline */ | |
| op[0] = create_branch((unsigned int *)ip, | |
| rec->arch.mod->arch.tramp, BRANCH_SET_LINK); | |
| if (!op[0]) { | |
| printk(KERN_ERR "REL24 out of range!\n"); | |
| return -EINVAL; | |
| } | |
| /* ld r2,40(r1) */ | |
| op[1] = 0xe8410028; | |
| DEBUGP("write to %lx\n", rec->ip); | |
| if (probe_kernel_write((void *)ip, op, MCOUNT_INSN_SIZE * 2)) | |
| return -EPERM; | |
| flush_icache_range(ip, ip + 8); | |
| return 0; | |
| } | |
| #else | |
| static int | |
| __ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr) | |
| { | |
| unsigned int op; | |
| unsigned long ip = rec->ip; | |
| /* read where this goes */ | |
| if (probe_kernel_read(&op, (void *)ip, MCOUNT_INSN_SIZE)) | |
| return -EFAULT; | |
| /* It should be pointing to a nop */ | |
| if (op != PPC_NOP_INSTR) { | |
| printk(KERN_ERR "Expected NOP but have %x\n", op); | |
| return -EINVAL; | |
| } | |
| /* If we never set up a trampoline to ftrace_caller, then bail */ | |
| if (!rec->arch.mod->arch.tramp) { | |
| printk(KERN_ERR "No ftrace trampoline\n"); | |
| return -EINVAL; | |
| } | |
| /* create the branch to the trampoline */ | |
| op = create_branch((unsigned int *)ip, | |
| rec->arch.mod->arch.tramp, BRANCH_SET_LINK); | |
| if (!op) { | |
| printk(KERN_ERR "REL24 out of range!\n"); | |
| return -EINVAL; | |
| } | |
| DEBUGP("write to %lx\n", rec->ip); | |
| if (probe_kernel_write((void *)ip, &op, MCOUNT_INSN_SIZE)) | |
| return -EPERM; | |
| flush_icache_range(ip, ip + 8); | |
| return 0; | |
| } | |
| #endif /* CONFIG_PPC64 */ | |
| int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr) | |
| { | |
| unsigned char *old, *new; | |
| unsigned long ip = rec->ip; | |
| /* | |
| * If the calling address is more that 24 bits away, | |
| * then we had to use a trampoline to make the call. | |
| * Otherwise just update the call site. | |
| */ | |
| if (test_24bit_addr(ip, addr)) { | |
| /* within range */ | |
| old = ftrace_nop_replace(); | |
| new = ftrace_call_replace(ip, addr); | |
| return ftrace_modify_code(ip, old, new); | |
| } | |
| /* | |
| * Out of range jumps are called from modules. | |
| * Being that we are converting from nop, it had better | |
| * already have a module defined. | |
| */ | |
| if (!rec->arch.mod) { | |
| printk(KERN_ERR "No module loaded\n"); | |
| return -EINVAL; | |
| } | |
| return __ftrace_make_call(rec, addr); | |
| } | |
| int ftrace_update_ftrace_func(ftrace_func_t func) | |
| { | |
| unsigned long ip = (unsigned long)(&ftrace_call); | |
| unsigned char old[MCOUNT_INSN_SIZE], *new; | |
| int ret; | |
| memcpy(old, &ftrace_call, MCOUNT_INSN_SIZE); | |
| new = ftrace_call_replace(ip, (unsigned long)func); | |
| ret = ftrace_modify_code(ip, old, new); | |
| return ret; | |
| } | |
| int __init ftrace_dyn_arch_init(void *data) | |
| { | |
| /* caller expects data to be zero */ | |
| unsigned long *p = data; | |
| *p = 0; | |
| return 0; | |
| } |