| /* |
| * |
| * BRIEF MODULE DESCRIPTION |
| * Include file for Alchemy Semiconductor's Au1550 Descriptor |
| * Based DMA Controller. |
| * |
| * Copyright 2004 Embedded Edge, LLC |
| * dan@embeddededge.com |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| * |
| * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED |
| * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF |
| * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN |
| * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, |
| * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT |
| * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF |
| * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON |
| * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF |
| * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| * |
| * You should have received a copy of the GNU General Public License along |
| * with this program; if not, write to the Free Software Foundation, Inc., |
| * 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| /* |
| * Specifics for the Au1xxx Descriptor-Based DMA Controller, |
| * first seen in the AU1550 part. |
| */ |
| #ifndef _AU1000_DBDMA_H_ |
| #define _AU1000_DBDMA_H_ |
| |
| #ifndef _LANGUAGE_ASSEMBLY |
| |
| typedef volatile struct dbdma_global { |
| u32 ddma_config; |
| u32 ddma_intstat; |
| u32 ddma_throttle; |
| u32 ddma_inten; |
| } dbdma_global_t; |
| |
| /* General Configuration. */ |
| #define DDMA_CONFIG_AF (1 << 2) |
| #define DDMA_CONFIG_AH (1 << 1) |
| #define DDMA_CONFIG_AL (1 << 0) |
| |
| #define DDMA_THROTTLE_EN (1 << 31) |
| |
| /* The structure of a DMA Channel. */ |
| typedef volatile struct au1xxx_dma_channel { |
| u32 ddma_cfg; /* See below */ |
| u32 ddma_desptr; /* 32-byte aligned pointer to descriptor */ |
| u32 ddma_statptr; /* word aligned pointer to status word */ |
| u32 ddma_dbell; /* A write activates channel operation */ |
| u32 ddma_irq; /* If bit 0 set, interrupt pending */ |
| u32 ddma_stat; /* See below */ |
| u32 ddma_bytecnt; /* Byte count, valid only when chan idle */ |
| /* Remainder, up to the 256 byte boundary, is reserved. */ |
| } au1x_dma_chan_t; |
| |
| #define DDMA_CFG_SED (1 << 9) /* source DMA level/edge detect */ |
| #define DDMA_CFG_SP (1 << 8) /* source DMA polarity */ |
| #define DDMA_CFG_DED (1 << 7) /* destination DMA level/edge detect */ |
| #define DDMA_CFG_DP (1 << 6) /* destination DMA polarity */ |
| #define DDMA_CFG_SYNC (1 << 5) /* Sync static bus controller */ |
| #define DDMA_CFG_PPR (1 << 4) /* PCI posted read/write control */ |
| #define DDMA_CFG_DFN (1 << 3) /* Descriptor fetch non-coherent */ |
| #define DDMA_CFG_SBE (1 << 2) /* Source big endian */ |
| #define DDMA_CFG_DBE (1 << 1) /* Destination big endian */ |
| #define DDMA_CFG_EN (1 << 0) /* Channel enable */ |
| |
| /* |
| * Always set when descriptor processing done, regardless of |
| * interrupt enable state. Reflected in global intstat, don't |
| * clear this until global intstat is read/used. |
| */ |
| #define DDMA_IRQ_IN (1 << 0) |
| |
| #define DDMA_STAT_DB (1 << 2) /* Doorbell pushed */ |
| #define DDMA_STAT_V (1 << 1) /* Descriptor valid */ |
| #define DDMA_STAT_H (1 << 0) /* Channel Halted */ |
| |
| /* |
| * "Standard" DDMA Descriptor. |
| * Must be 32-byte aligned. |
| */ |
| typedef volatile struct au1xxx_ddma_desc { |
| u32 dscr_cmd0; /* See below */ |
| u32 dscr_cmd1; /* See below */ |
| u32 dscr_source0; /* source phys address */ |
| u32 dscr_source1; /* See below */ |
| u32 dscr_dest0; /* Destination address */ |
| u32 dscr_dest1; /* See below */ |
| u32 dscr_stat; /* completion status */ |
| u32 dscr_nxtptr; /* Next descriptor pointer (mostly) */ |
| /* |
| * First 32 bytes are HW specific!!! |
| * Let's have some SW data following -- make sure it's 32 bytes. |
| */ |
| u32 sw_status; |
| u32 sw_context; |
| u32 sw_reserved[6]; |
| } au1x_ddma_desc_t; |
| |
| #define DSCR_CMD0_V (1 << 31) /* Descriptor valid */ |
| #define DSCR_CMD0_MEM (1 << 30) /* mem-mem transfer */ |
| #define DSCR_CMD0_SID_MASK (0x1f << 25) /* Source ID */ |
| #define DSCR_CMD0_DID_MASK (0x1f << 20) /* Destination ID */ |
| #define DSCR_CMD0_SW_MASK (0x3 << 18) /* Source Width */ |
| #define DSCR_CMD0_DW_MASK (0x3 << 16) /* Destination Width */ |
| #define DSCR_CMD0_ARB (0x1 << 15) /* Set for Hi Pri */ |
| #define DSCR_CMD0_DT_MASK (0x3 << 13) /* Descriptor Type */ |
| #define DSCR_CMD0_SN (0x1 << 12) /* Source non-coherent */ |
| #define DSCR_CMD0_DN (0x1 << 11) /* Destination non-coherent */ |
| #define DSCR_CMD0_SM (0x1 << 10) /* Stride mode */ |
| #define DSCR_CMD0_IE (0x1 << 8) /* Interrupt Enable */ |
| #define DSCR_CMD0_SP (0x1 << 4) /* Status pointer select */ |
| #define DSCR_CMD0_CV (0x1 << 2) /* Clear Valid when done */ |
| #define DSCR_CMD0_ST_MASK (0x3 << 0) /* Status instruction */ |
| |
| #define SW_STATUS_INUSE (1 << 0) |
| |
| /* Command 0 device IDs. */ |
| #define AU1550_DSCR_CMD0_UART0_TX 0 |
| #define AU1550_DSCR_CMD0_UART0_RX 1 |
| #define AU1550_DSCR_CMD0_UART3_TX 2 |
| #define AU1550_DSCR_CMD0_UART3_RX 3 |
| #define AU1550_DSCR_CMD0_DMA_REQ0 4 |
| #define AU1550_DSCR_CMD0_DMA_REQ1 5 |
| #define AU1550_DSCR_CMD0_DMA_REQ2 6 |
| #define AU1550_DSCR_CMD0_DMA_REQ3 7 |
| #define AU1550_DSCR_CMD0_USBDEV_RX0 8 |
| #define AU1550_DSCR_CMD0_USBDEV_TX0 9 |
| #define AU1550_DSCR_CMD0_USBDEV_TX1 10 |
| #define AU1550_DSCR_CMD0_USBDEV_TX2 11 |
| #define AU1550_DSCR_CMD0_USBDEV_RX3 12 |
| #define AU1550_DSCR_CMD0_USBDEV_RX4 13 |
| #define AU1550_DSCR_CMD0_PSC0_TX 14 |
| #define AU1550_DSCR_CMD0_PSC0_RX 15 |
| #define AU1550_DSCR_CMD0_PSC1_TX 16 |
| #define AU1550_DSCR_CMD0_PSC1_RX 17 |
| #define AU1550_DSCR_CMD0_PSC2_TX 18 |
| #define AU1550_DSCR_CMD0_PSC2_RX 19 |
| #define AU1550_DSCR_CMD0_PSC3_TX 20 |
| #define AU1550_DSCR_CMD0_PSC3_RX 21 |
| #define AU1550_DSCR_CMD0_PCI_WRITE 22 |
| #define AU1550_DSCR_CMD0_NAND_FLASH 23 |
| #define AU1550_DSCR_CMD0_MAC0_RX 24 |
| #define AU1550_DSCR_CMD0_MAC0_TX 25 |
| #define AU1550_DSCR_CMD0_MAC1_RX 26 |
| #define AU1550_DSCR_CMD0_MAC1_TX 27 |
| |
| #define AU1200_DSCR_CMD0_UART0_TX 0 |
| #define AU1200_DSCR_CMD0_UART0_RX 1 |
| #define AU1200_DSCR_CMD0_UART1_TX 2 |
| #define AU1200_DSCR_CMD0_UART1_RX 3 |
| #define AU1200_DSCR_CMD0_DMA_REQ0 4 |
| #define AU1200_DSCR_CMD0_DMA_REQ1 5 |
| #define AU1200_DSCR_CMD0_MAE_BE 6 |
| #define AU1200_DSCR_CMD0_MAE_FE 7 |
| #define AU1200_DSCR_CMD0_SDMS_TX0 8 |
| #define AU1200_DSCR_CMD0_SDMS_RX0 9 |
| #define AU1200_DSCR_CMD0_SDMS_TX1 10 |
| #define AU1200_DSCR_CMD0_SDMS_RX1 11 |
| #define AU1200_DSCR_CMD0_AES_TX 13 |
| #define AU1200_DSCR_CMD0_AES_RX 12 |
| #define AU1200_DSCR_CMD0_PSC0_TX 14 |
| #define AU1200_DSCR_CMD0_PSC0_RX 15 |
| #define AU1200_DSCR_CMD0_PSC1_TX 16 |
| #define AU1200_DSCR_CMD0_PSC1_RX 17 |
| #define AU1200_DSCR_CMD0_CIM_RXA 18 |
| #define AU1200_DSCR_CMD0_CIM_RXB 19 |
| #define AU1200_DSCR_CMD0_CIM_RXC 20 |
| #define AU1200_DSCR_CMD0_MAE_BOTH 21 |
| #define AU1200_DSCR_CMD0_LCD 22 |
| #define AU1200_DSCR_CMD0_NAND_FLASH 23 |
| #define AU1200_DSCR_CMD0_PSC0_SYNC 24 |
| #define AU1200_DSCR_CMD0_PSC1_SYNC 25 |
| #define AU1200_DSCR_CMD0_CIM_SYNC 26 |
| |
| #define AU1300_DSCR_CMD0_UART0_TX 0 |
| #define AU1300_DSCR_CMD0_UART0_RX 1 |
| #define AU1300_DSCR_CMD0_UART1_TX 2 |
| #define AU1300_DSCR_CMD0_UART1_RX 3 |
| #define AU1300_DSCR_CMD0_UART2_TX 4 |
| #define AU1300_DSCR_CMD0_UART2_RX 5 |
| #define AU1300_DSCR_CMD0_UART3_TX 6 |
| #define AU1300_DSCR_CMD0_UART3_RX 7 |
| #define AU1300_DSCR_CMD0_SDMS_TX0 8 |
| #define AU1300_DSCR_CMD0_SDMS_RX0 9 |
| #define AU1300_DSCR_CMD0_SDMS_TX1 10 |
| #define AU1300_DSCR_CMD0_SDMS_RX1 11 |
| #define AU1300_DSCR_CMD0_AES_TX 12 |
| #define AU1300_DSCR_CMD0_AES_RX 13 |
| #define AU1300_DSCR_CMD0_PSC0_TX 14 |
| #define AU1300_DSCR_CMD0_PSC0_RX 15 |
| #define AU1300_DSCR_CMD0_PSC1_TX 16 |
| #define AU1300_DSCR_CMD0_PSC1_RX 17 |
| #define AU1300_DSCR_CMD0_PSC2_TX 18 |
| #define AU1300_DSCR_CMD0_PSC2_RX 19 |
| #define AU1300_DSCR_CMD0_PSC3_TX 20 |
| #define AU1300_DSCR_CMD0_PSC3_RX 21 |
| #define AU1300_DSCR_CMD0_LCD 22 |
| #define AU1300_DSCR_CMD0_NAND_FLASH 23 |
| #define AU1300_DSCR_CMD0_SDMS_TX2 24 |
| #define AU1300_DSCR_CMD0_SDMS_RX2 25 |
| #define AU1300_DSCR_CMD0_CIM_SYNC 26 |
| #define AU1300_DSCR_CMD0_UDMA 27 |
| #define AU1300_DSCR_CMD0_DMA_REQ0 28 |
| #define AU1300_DSCR_CMD0_DMA_REQ1 29 |
| |
| #define DSCR_CMD0_THROTTLE 30 |
| #define DSCR_CMD0_ALWAYS 31 |
| #define DSCR_NDEV_IDS 32 |
| /* This macro is used to find/create custom device types */ |
| #define DSCR_DEV2CUSTOM_ID(x, d) (((((x) & 0xFFFF) << 8) | 0x32000000) | \ |
| ((d) & 0xFF)) |
| #define DSCR_CUSTOM2DEV_ID(x) ((x) & 0xFF) |
| |
| #define DSCR_CMD0_SID(x) (((x) & 0x1f) << 25) |
| #define DSCR_CMD0_DID(x) (((x) & 0x1f) << 20) |
| |
| /* Source/Destination transfer width. */ |
| #define DSCR_CMD0_BYTE 0 |
| #define DSCR_CMD0_HALFWORD 1 |
| #define DSCR_CMD0_WORD 2 |
| |
| #define DSCR_CMD0_SW(x) (((x) & 0x3) << 18) |
| #define DSCR_CMD0_DW(x) (((x) & 0x3) << 16) |
| |
| /* DDMA Descriptor Type. */ |
| #define DSCR_CMD0_STANDARD 0 |
| #define DSCR_CMD0_LITERAL 1 |
| #define DSCR_CMD0_CMP_BRANCH 2 |
| |
| #define DSCR_CMD0_DT(x) (((x) & 0x3) << 13) |
| |
| /* Status Instruction. */ |
| #define DSCR_CMD0_ST_NOCHANGE 0 /* Don't change */ |
| #define DSCR_CMD0_ST_CURRENT 1 /* Write current status */ |
| #define DSCR_CMD0_ST_CMD0 2 /* Write cmd0 with V cleared */ |
| #define DSCR_CMD0_ST_BYTECNT 3 /* Write remaining byte count */ |
| |
| #define DSCR_CMD0_ST(x) (((x) & 0x3) << 0) |
| |
| /* Descriptor Command 1. */ |
| #define DSCR_CMD1_SUPTR_MASK (0xf << 28) /* upper 4 bits of src addr */ |
| #define DSCR_CMD1_DUPTR_MASK (0xf << 24) /* upper 4 bits of dest addr */ |
| #define DSCR_CMD1_FL_MASK (0x3 << 22) /* Flag bits */ |
| #define DSCR_CMD1_BC_MASK (0x3fffff) /* Byte count */ |
| |
| /* Flag description. */ |
| #define DSCR_CMD1_FL_MEM_STRIDE0 0 |
| #define DSCR_CMD1_FL_MEM_STRIDE1 1 |
| #define DSCR_CMD1_FL_MEM_STRIDE2 2 |
| |
| #define DSCR_CMD1_FL(x) (((x) & 0x3) << 22) |
| |
| /* Source1, 1-dimensional stride. */ |
| #define DSCR_SRC1_STS_MASK (3 << 30) /* Src xfer size */ |
| #define DSCR_SRC1_SAM_MASK (3 << 28) /* Src xfer movement */ |
| #define DSCR_SRC1_SB_MASK (0x3fff << 14) /* Block size */ |
| #define DSCR_SRC1_SB(x) (((x) & 0x3fff) << 14) |
| #define DSCR_SRC1_SS_MASK (0x3fff << 0) /* Stride */ |
| #define DSCR_SRC1_SS(x) (((x) & 0x3fff) << 0) |
| |
| /* Dest1, 1-dimensional stride. */ |
| #define DSCR_DEST1_DTS_MASK (3 << 30) /* Dest xfer size */ |
| #define DSCR_DEST1_DAM_MASK (3 << 28) /* Dest xfer movement */ |
| #define DSCR_DEST1_DB_MASK (0x3fff << 14) /* Block size */ |
| #define DSCR_DEST1_DB(x) (((x) & 0x3fff) << 14) |
| #define DSCR_DEST1_DS_MASK (0x3fff << 0) /* Stride */ |
| #define DSCR_DEST1_DS(x) (((x) & 0x3fff) << 0) |
| |
| #define DSCR_xTS_SIZE1 0 |
| #define DSCR_xTS_SIZE2 1 |
| #define DSCR_xTS_SIZE4 2 |
| #define DSCR_xTS_SIZE8 3 |
| #define DSCR_SRC1_STS(x) (((x) & 3) << 30) |
| #define DSCR_DEST1_DTS(x) (((x) & 3) << 30) |
| |
| #define DSCR_xAM_INCREMENT 0 |
| #define DSCR_xAM_DECREMENT 1 |
| #define DSCR_xAM_STATIC 2 |
| #define DSCR_xAM_BURST 3 |
| #define DSCR_SRC1_SAM(x) (((x) & 3) << 28) |
| #define DSCR_DEST1_DAM(x) (((x) & 3) << 28) |
| |
| /* The next descriptor pointer. */ |
| #define DSCR_NXTPTR_MASK (0x07ffffff) |
| #define DSCR_NXTPTR(x) ((x) >> 5) |
| #define DSCR_GET_NXTPTR(x) ((x) << 5) |
| #define DSCR_NXTPTR_MS (1 << 27) |
| |
| /* The number of DBDMA channels. */ |
| #define NUM_DBDMA_CHANS 16 |
| |
| /* |
| * DDMA API definitions |
| * FIXME: may not fit to this header file |
| */ |
| typedef struct dbdma_device_table { |
| u32 dev_id; |
| u32 dev_flags; |
| u32 dev_tsize; |
| u32 dev_devwidth; |
| u32 dev_physaddr; /* If FIFO */ |
| u32 dev_intlevel; |
| u32 dev_intpolarity; |
| } dbdev_tab_t; |
| |
| |
| typedef struct dbdma_chan_config { |
| spinlock_t lock; |
| |
| u32 chan_flags; |
| u32 chan_index; |
| dbdev_tab_t *chan_src; |
| dbdev_tab_t *chan_dest; |
| au1x_dma_chan_t *chan_ptr; |
| au1x_ddma_desc_t *chan_desc_base; |
| u32 cdb_membase; /* kmalloc base of above */ |
| au1x_ddma_desc_t *get_ptr, *put_ptr, *cur_ptr; |
| void *chan_callparam; |
| void (*chan_callback)(int, void *); |
| } chan_tab_t; |
| |
| #define DEV_FLAGS_INUSE (1 << 0) |
| #define DEV_FLAGS_ANYUSE (1 << 1) |
| #define DEV_FLAGS_OUT (1 << 2) |
| #define DEV_FLAGS_IN (1 << 3) |
| #define DEV_FLAGS_BURSTABLE (1 << 4) |
| #define DEV_FLAGS_SYNC (1 << 5) |
| /* end DDMA API definitions */ |
| |
| /* |
| * External functions for drivers to use. |
| * Use this to allocate a DBDMA channel. The device IDs are one of |
| * the DSCR_CMD0 devices IDs, which is usually redefined to a more |
| * meaningful name. The 'callback' is called during DMA completion |
| * interrupt. |
| */ |
| extern u32 au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid, |
| void (*callback)(int, void *), |
| void *callparam); |
| |
| #define DBDMA_MEM_CHAN DSCR_CMD0_ALWAYS |
| |
| /* Set the device width of an in/out FIFO. */ |
| u32 au1xxx_dbdma_set_devwidth(u32 chanid, int bits); |
| |
| /* Allocate a ring of descriptors for DBDMA. */ |
| u32 au1xxx_dbdma_ring_alloc(u32 chanid, int entries); |
| |
| /* Put buffers on source/destination descriptors. */ |
| u32 au1xxx_dbdma_put_source(u32 chanid, dma_addr_t buf, int nbytes, u32 flags); |
| u32 au1xxx_dbdma_put_dest(u32 chanid, dma_addr_t buf, int nbytes, u32 flags); |
| |
| /* Get a buffer from the destination descriptor. */ |
| u32 au1xxx_dbdma_get_dest(u32 chanid, void **buf, int *nbytes); |
| |
| void au1xxx_dbdma_stop(u32 chanid); |
| void au1xxx_dbdma_start(u32 chanid); |
| void au1xxx_dbdma_reset(u32 chanid); |
| u32 au1xxx_get_dma_residue(u32 chanid); |
| |
| void au1xxx_dbdma_chan_free(u32 chanid); |
| void au1xxx_dbdma_dump(u32 chanid); |
| |
| u32 au1xxx_dbdma_put_dscr(u32 chanid, au1x_ddma_desc_t *dscr); |
| |
| u32 au1xxx_ddma_add_device(dbdev_tab_t *dev); |
| extern void au1xxx_ddma_del_device(u32 devid); |
| void *au1xxx_ddma_get_nextptr_virt(au1x_ddma_desc_t *dp); |
| |
| /* |
| * Flags for the put_source/put_dest functions. |
| */ |
| #define DDMA_FLAGS_IE (1 << 0) |
| #define DDMA_FLAGS_NOIE (1 << 1) |
| |
| #endif /* _LANGUAGE_ASSEMBLY */ |
| #endif /* _AU1000_DBDMA_H_ */ |
