| /* |
| * This file is provided under a dual BSD/GPLv2 license. When using or |
| * redistributing this file, you may do so under either license. |
| * |
| * GPL LICENSE SUMMARY |
| * |
| * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of version 2 of the GNU General Public License as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. |
| * The full GNU General Public License is included in this distribution |
| * in the file called LICENSE.GPL. |
| * |
| * BSD LICENSE |
| * |
| * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * |
| * * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * * Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in |
| * the documentation and/or other materials provided with the |
| * distribution. |
| * * Neither the name of Intel Corporation nor the names of its |
| * contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| #include <scsi/sas.h> |
| #include "sas.h" |
| #include "state_machine.h" |
| #include "remote_device.h" |
| #include "stp_request.h" |
| #include "unsolicited_frame_control.h" |
| #include "scu_completion_codes.h" |
| #include "scu_event_codes.h" |
| #include "scu_task_context.h" |
| #include "request.h" |
| |
| /** |
| * This method is will fill in the SCU Task Context for any type of SATA |
| * request. This is called from the various SATA constructors. |
| * @sci_req: The general IO request object which is to be used in |
| * constructing the SCU task context. |
| * @task_context: The buffer pointer for the SCU task context which is being |
| * constructed. |
| * |
| * The general io request construction is complete. The buffer assignment for |
| * the command buffer is complete. none Revisit task context construction to |
| * determine what is common for SSP/SMP/STP task context structures. |
| */ |
| static void scu_sata_reqeust_construct_task_context( |
| struct scic_sds_request *sci_req, |
| struct scu_task_context *task_context) |
| { |
| dma_addr_t dma_addr; |
| struct scic_sds_controller *controller; |
| struct scic_sds_remote_device *target_device; |
| struct scic_sds_port *target_port; |
| |
| controller = scic_sds_request_get_controller(sci_req); |
| target_device = scic_sds_request_get_device(sci_req); |
| target_port = scic_sds_request_get_port(sci_req); |
| |
| /* Fill in the TC with the its required data */ |
| task_context->abort = 0; |
| task_context->priority = SCU_TASK_PRIORITY_NORMAL; |
| task_context->initiator_request = 1; |
| task_context->connection_rate = target_device->connection_rate; |
| task_context->protocol_engine_index = |
| scic_sds_controller_get_protocol_engine_group(controller); |
| task_context->logical_port_index = |
| scic_sds_port_get_index(target_port); |
| task_context->protocol_type = SCU_TASK_CONTEXT_PROTOCOL_STP; |
| task_context->valid = SCU_TASK_CONTEXT_VALID; |
| task_context->context_type = SCU_TASK_CONTEXT_TYPE; |
| |
| task_context->remote_node_index = |
| scic_sds_remote_device_get_index(sci_req->target_device); |
| task_context->command_code = 0; |
| |
| task_context->link_layer_control = 0; |
| task_context->do_not_dma_ssp_good_response = 1; |
| task_context->strict_ordering = 0; |
| task_context->control_frame = 0; |
| task_context->timeout_enable = 0; |
| task_context->block_guard_enable = 0; |
| |
| task_context->address_modifier = 0; |
| task_context->task_phase = 0x01; |
| |
| task_context->ssp_command_iu_length = |
| (sizeof(struct host_to_dev_fis) - sizeof(u32)) / sizeof(u32); |
| |
| /* Set the first word of the H2D REG FIS */ |
| task_context->type.words[0] = *(u32 *)&sci_req->stp.cmd; |
| |
| if (sci_req->was_tag_assigned_by_user) { |
| /* |
| * Build the task context now since we have already read |
| * the data |
| */ |
| sci_req->post_context = |
| (SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC | |
| (scic_sds_controller_get_protocol_engine_group( |
| controller) << |
| SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT) | |
| (scic_sds_port_get_index(target_port) << |
| SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT) | |
| scic_sds_io_tag_get_index(sci_req->io_tag)); |
| } else { |
| /* |
| * Build the task context now since we have already read |
| * the data. |
| * I/O tag index is not assigned because we have to wait |
| * until we get a TCi. |
| */ |
| sci_req->post_context = |
| (SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC | |
| (scic_sds_controller_get_protocol_engine_group( |
| controller) << |
| SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT) | |
| (scic_sds_port_get_index(target_port) << |
| SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT)); |
| } |
| |
| /* |
| * Copy the physical address for the command buffer to the SCU Task |
| * Context. We must offset the command buffer by 4 bytes because the |
| * first 4 bytes are transfered in the body of the TC. |
| */ |
| dma_addr = scic_io_request_get_dma_addr(sci_req, |
| ((char *) &sci_req->stp.cmd) + |
| sizeof(u32)); |
| |
| task_context->command_iu_upper = upper_32_bits(dma_addr); |
| task_context->command_iu_lower = lower_32_bits(dma_addr); |
| |
| /* SATA Requests do not have a response buffer */ |
| task_context->response_iu_upper = 0; |
| task_context->response_iu_lower = 0; |
| } |
| |
| /** |
| * |
| * @sci_req: |
| * |
| * This method will perform any general sata request construction. What part of |
| * SATA IO request construction is general? none |
| */ |
| static void scic_sds_stp_non_ncq_request_construct( |
| struct scic_sds_request *sci_req) |
| { |
| sci_req->has_started_substate_machine = true; |
| } |
| |
| /** |
| * |
| * @sci_req: This parameter specifies the request to be constructed as an |
| * optimized request. |
| * @optimized_task_type: This parameter specifies whether the request is to be |
| * an UDMA request or a NCQ request. - A value of 0 indicates UDMA. - A |
| * value of 1 indicates NCQ. |
| * |
| * This method will perform request construction common to all types of STP |
| * requests that are optimized by the silicon (i.e. UDMA, NCQ). This method |
| * returns an indication as to whether the construction was successful. |
| */ |
| static void scic_sds_stp_optimized_request_construct(struct scic_sds_request *sci_req, |
| u8 optimized_task_type, |
| u32 len, |
| enum dma_data_direction dir) |
| { |
| struct scu_task_context *task_context = sci_req->task_context_buffer; |
| |
| /* Build the STP task context structure */ |
| scu_sata_reqeust_construct_task_context(sci_req, task_context); |
| |
| /* Copy over the SGL elements */ |
| scic_sds_request_build_sgl(sci_req); |
| |
| /* Copy over the number of bytes to be transfered */ |
| task_context->transfer_length_bytes = len; |
| |
| if (dir == DMA_TO_DEVICE) { |
| /* |
| * The difference between the DMA IN and DMA OUT request task type |
| * values are consistent with the difference between FPDMA READ |
| * and FPDMA WRITE values. Add the supplied task type parameter |
| * to this difference to set the task type properly for this |
| * DATA OUT (WRITE) case. */ |
| task_context->task_type = optimized_task_type + (SCU_TASK_TYPE_DMA_OUT |
| - SCU_TASK_TYPE_DMA_IN); |
| } else { |
| /* |
| * For the DATA IN (READ) case, simply save the supplied |
| * optimized task type. */ |
| task_context->task_type = optimized_task_type; |
| } |
| } |
| |
| /** |
| * |
| * @sci_req: This parameter specifies the request to be constructed. |
| * |
| * This method will construct the STP UDMA request and its associated TC data. |
| * This method returns an indication as to whether the construction was |
| * successful. SCI_SUCCESS Currently this method always returns this value. |
| */ |
| enum sci_status scic_sds_stp_ncq_request_construct(struct scic_sds_request *sci_req, |
| u32 len, |
| enum dma_data_direction dir) |
| { |
| scic_sds_stp_optimized_request_construct(sci_req, |
| SCU_TASK_TYPE_FPDMAQ_READ, |
| len, dir); |
| return SCI_SUCCESS; |
| } |
| |
| /** |
| * scu_stp_raw_request_construct_task_context - |
| * @sci_req: This parameter specifies the STP request object for which to |
| * construct a RAW command frame task context. |
| * @task_context: This parameter specifies the SCU specific task context buffer |
| * to construct. |
| * |
| * This method performs the operations common to all SATA/STP requests |
| * utilizing the raw frame method. none |
| */ |
| static void scu_stp_raw_request_construct_task_context( |
| struct scic_sds_stp_request *stp_req, |
| struct scu_task_context *task_context) |
| { |
| struct scic_sds_request *sci_req = to_sci_req(stp_req); |
| |
| scu_sata_reqeust_construct_task_context(sci_req, task_context); |
| |
| task_context->control_frame = 0; |
| task_context->priority = SCU_TASK_PRIORITY_NORMAL; |
| task_context->task_type = SCU_TASK_TYPE_SATA_RAW_FRAME; |
| task_context->type.stp.fis_type = FIS_REGH2D; |
| task_context->transfer_length_bytes = sizeof(struct host_to_dev_fis) - sizeof(u32); |
| } |
| |
| void scic_stp_io_request_set_ncq_tag( |
| struct scic_sds_request *req, |
| u16 ncq_tag) |
| { |
| /** |
| * @note This could be made to return an error to the user if the user |
| * attempts to set the NCQ tag in the wrong state. |
| */ |
| req->task_context_buffer->type.stp.ncq_tag = ncq_tag; |
| } |
| |
| /** |
| * |
| * @sci_req: |
| * |
| * Get the next SGL element from the request. - Check on which SGL element pair |
| * we are working - if working on SLG pair element A - advance to element B - |
| * else - check to see if there are more SGL element pairs for this IO request |
| * - if there are more SGL element pairs - advance to the next pair and return |
| * element A struct scu_sgl_element* |
| */ |
| static struct scu_sgl_element *scic_sds_stp_request_pio_get_next_sgl(struct scic_sds_stp_request *stp_req) |
| { |
| struct scu_sgl_element *current_sgl; |
| struct scic_sds_request *sci_req = to_sci_req(stp_req); |
| struct scic_sds_request_pio_sgl *pio_sgl = &stp_req->type.pio.request_current; |
| |
| if (pio_sgl->sgl_set == SCU_SGL_ELEMENT_PAIR_A) { |
| if (pio_sgl->sgl_pair->B.address_lower == 0 && |
| pio_sgl->sgl_pair->B.address_upper == 0) { |
| current_sgl = NULL; |
| } else { |
| pio_sgl->sgl_set = SCU_SGL_ELEMENT_PAIR_B; |
| current_sgl = &pio_sgl->sgl_pair->B; |
| } |
| } else { |
| if (pio_sgl->sgl_pair->next_pair_lower == 0 && |
| pio_sgl->sgl_pair->next_pair_upper == 0) { |
| current_sgl = NULL; |
| } else { |
| u64 phys_addr; |
| |
| phys_addr = pio_sgl->sgl_pair->next_pair_upper; |
| phys_addr <<= 32; |
| phys_addr |= pio_sgl->sgl_pair->next_pair_lower; |
| |
| pio_sgl->sgl_pair = scic_request_get_virt_addr(sci_req, phys_addr); |
| pio_sgl->sgl_set = SCU_SGL_ELEMENT_PAIR_A; |
| current_sgl = &pio_sgl->sgl_pair->A; |
| } |
| } |
| |
| return current_sgl; |
| } |
| |
| /** |
| * |
| * @sci_req: |
| * @completion_code: |
| * |
| * This method processes a TC completion. The expected TC completion is for |
| * the transmission of the H2D register FIS containing the SATA/STP non-data |
| * request. This method always successfully processes the TC completion. |
| * SCI_SUCCESS This value is always returned. |
| */ |
| static enum sci_status scic_sds_stp_request_non_data_await_h2d_tc_completion_handler( |
| struct scic_sds_request *sci_req, |
| u32 completion_code) |
| { |
| switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { |
| case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): |
| scic_sds_request_set_status( |
| sci_req, SCU_TASK_DONE_GOOD, SCI_SUCCESS |
| ); |
| |
| sci_base_state_machine_change_state( |
| &sci_req->started_substate_machine, |
| SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_D2H_SUBSTATE |
| ); |
| break; |
| |
| default: |
| /* |
| * All other completion status cause the IO to be complete. If a NAK |
| * was received, then it is up to the user to retry the request. */ |
| scic_sds_request_set_status( |
| sci_req, |
| SCU_NORMALIZE_COMPLETION_STATUS(completion_code), |
| SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR |
| ); |
| |
| sci_base_state_machine_change_state( |
| &sci_req->state_machine, SCI_BASE_REQUEST_STATE_COMPLETED); |
| break; |
| } |
| |
| return SCI_SUCCESS; |
| } |
| |
| /** |
| * |
| * @request: This parameter specifies the request for which a frame has been |
| * received. |
| * @frame_index: This parameter specifies the index of the frame that has been |
| * received. |
| * |
| * This method processes frames received from the target while waiting for a |
| * device to host register FIS. If a non-register FIS is received during this |
| * time, it is treated as a protocol violation from an IO perspective. Indicate |
| * if the received frame was processed successfully. |
| */ |
| static enum sci_status scic_sds_stp_request_non_data_await_d2h_frame_handler( |
| struct scic_sds_request *sci_req, |
| u32 frame_index) |
| { |
| enum sci_status status; |
| struct dev_to_host_fis *frame_header; |
| u32 *frame_buffer; |
| struct scic_sds_stp_request *stp_req = &sci_req->stp.req; |
| struct scic_sds_controller *scic = sci_req->owning_controller; |
| |
| status = scic_sds_unsolicited_frame_control_get_header(&scic->uf_control, |
| frame_index, |
| (void **)&frame_header); |
| |
| if (status != SCI_SUCCESS) { |
| dev_err(scic_to_dev(sci_req->owning_controller), |
| "%s: SCIC IO Request 0x%p could not get frame header " |
| "for frame index %d, status %x\n", |
| __func__, stp_req, frame_index, status); |
| |
| return status; |
| } |
| |
| switch (frame_header->fis_type) { |
| case FIS_REGD2H: |
| scic_sds_unsolicited_frame_control_get_buffer(&scic->uf_control, |
| frame_index, |
| (void **)&frame_buffer); |
| |
| scic_sds_controller_copy_sata_response(&sci_req->stp.rsp, |
| frame_header, |
| frame_buffer); |
| |
| /* The command has completed with error */ |
| scic_sds_request_set_status(sci_req, SCU_TASK_DONE_CHECK_RESPONSE, |
| SCI_FAILURE_IO_RESPONSE_VALID); |
| break; |
| |
| default: |
| dev_warn(scic_to_dev(scic), |
| "%s: IO Request:0x%p Frame Id:%d protocol " |
| "violation occurred\n", __func__, stp_req, |
| frame_index); |
| |
| scic_sds_request_set_status(sci_req, SCU_TASK_DONE_UNEXP_FIS, |
| SCI_FAILURE_PROTOCOL_VIOLATION); |
| break; |
| } |
| |
| sci_base_state_machine_change_state(&sci_req->state_machine, |
| SCI_BASE_REQUEST_STATE_COMPLETED); |
| |
| /* Frame has been decoded return it to the controller */ |
| scic_sds_controller_release_frame(scic, frame_index); |
| |
| return status; |
| } |
| |
| /* --------------------------------------------------------------------------- */ |
| |
| static const struct scic_sds_io_request_state_handler scic_sds_stp_request_started_non_data_substate_handler_table[] = { |
| [SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_H2D_COMPLETION_SUBSTATE] = { |
| .abort_handler = scic_sds_request_started_state_abort_handler, |
| .tc_completion_handler = scic_sds_stp_request_non_data_await_h2d_tc_completion_handler, |
| }, |
| [SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_D2H_SUBSTATE] = { |
| .abort_handler = scic_sds_request_started_state_abort_handler, |
| .frame_handler = scic_sds_stp_request_non_data_await_d2h_frame_handler, |
| } |
| }; |
| |
| static void scic_sds_stp_request_started_non_data_await_h2d_completion_enter( |
| void *object) |
| { |
| struct scic_sds_request *sci_req = object; |
| |
| SET_STATE_HANDLER( |
| sci_req, |
| scic_sds_stp_request_started_non_data_substate_handler_table, |
| SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_H2D_COMPLETION_SUBSTATE |
| ); |
| |
| scic_sds_remote_device_set_working_request( |
| sci_req->target_device, sci_req |
| ); |
| } |
| |
| static void scic_sds_stp_request_started_non_data_await_d2h_enter(void *object) |
| { |
| struct scic_sds_request *sci_req = object; |
| |
| SET_STATE_HANDLER( |
| sci_req, |
| scic_sds_stp_request_started_non_data_substate_handler_table, |
| SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_D2H_SUBSTATE |
| ); |
| } |
| |
| /* --------------------------------------------------------------------------- */ |
| |
| static const struct sci_base_state scic_sds_stp_request_started_non_data_substate_table[] = { |
| [SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_H2D_COMPLETION_SUBSTATE] = { |
| .enter_state = scic_sds_stp_request_started_non_data_await_h2d_completion_enter, |
| }, |
| [SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_D2H_SUBSTATE] = { |
| .enter_state = scic_sds_stp_request_started_non_data_await_d2h_enter, |
| }, |
| }; |
| |
| enum sci_status scic_sds_stp_non_data_request_construct(struct scic_sds_request *sci_req) |
| { |
| struct scic_sds_stp_request *stp_req = &sci_req->stp.req; |
| |
| scic_sds_stp_non_ncq_request_construct(sci_req); |
| |
| /* Build the STP task context structure */ |
| scu_stp_raw_request_construct_task_context(stp_req, sci_req->task_context_buffer); |
| |
| sci_base_state_machine_construct(&sci_req->started_substate_machine, |
| sci_req, |
| scic_sds_stp_request_started_non_data_substate_table, |
| SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_H2D_COMPLETION_SUBSTATE); |
| |
| return SCI_SUCCESS; |
| } |
| |
| #define SCU_MAX_FRAME_BUFFER_SIZE 0x400 /* 1K is the maximum SCU frame data payload */ |
| |
| /* transmit DATA_FIS from (current sgl + offset) for input |
| * parameter length. current sgl and offset is alreay stored in the IO request |
| */ |
| static enum sci_status scic_sds_stp_request_pio_data_out_trasmit_data_frame( |
| struct scic_sds_request *sci_req, |
| u32 length) |
| { |
| struct scic_sds_controller *scic = sci_req->owning_controller; |
| struct scic_sds_stp_request *stp_req = &sci_req->stp.req; |
| struct scu_task_context *task_context; |
| struct scu_sgl_element *current_sgl; |
| |
| /* Recycle the TC and reconstruct it for sending out DATA FIS containing |
| * for the data from current_sgl+offset for the input length |
| */ |
| task_context = scic_sds_controller_get_task_context_buffer(scic, |
| sci_req->io_tag); |
| |
| if (stp_req->type.pio.request_current.sgl_set == SCU_SGL_ELEMENT_PAIR_A) |
| current_sgl = &stp_req->type.pio.request_current.sgl_pair->A; |
| else |
| current_sgl = &stp_req->type.pio.request_current.sgl_pair->B; |
| |
| /* update the TC */ |
| task_context->command_iu_upper = current_sgl->address_upper; |
| task_context->command_iu_lower = current_sgl->address_lower; |
| task_context->transfer_length_bytes = length; |
| task_context->type.stp.fis_type = FIS_DATA; |
| |
| /* send the new TC out. */ |
| return scic_controller_continue_io(sci_req); |
| } |
| |
| static enum sci_status scic_sds_stp_request_pio_data_out_transmit_data(struct scic_sds_request *sci_req) |
| { |
| |
| struct scu_sgl_element *current_sgl; |
| u32 sgl_offset; |
| u32 remaining_bytes_in_current_sgl = 0; |
| enum sci_status status = SCI_SUCCESS; |
| struct scic_sds_stp_request *stp_req = &sci_req->stp.req; |
| |
| sgl_offset = stp_req->type.pio.request_current.sgl_offset; |
| |
| if (stp_req->type.pio.request_current.sgl_set == SCU_SGL_ELEMENT_PAIR_A) { |
| current_sgl = &(stp_req->type.pio.request_current.sgl_pair->A); |
| remaining_bytes_in_current_sgl = stp_req->type.pio.request_current.sgl_pair->A.length - sgl_offset; |
| } else { |
| current_sgl = &(stp_req->type.pio.request_current.sgl_pair->B); |
| remaining_bytes_in_current_sgl = stp_req->type.pio.request_current.sgl_pair->B.length - sgl_offset; |
| } |
| |
| |
| if (stp_req->type.pio.pio_transfer_bytes > 0) { |
| if (stp_req->type.pio.pio_transfer_bytes >= remaining_bytes_in_current_sgl) { |
| /* recycle the TC and send the H2D Data FIS from (current sgl + sgl_offset) and length = remaining_bytes_in_current_sgl */ |
| status = scic_sds_stp_request_pio_data_out_trasmit_data_frame(sci_req, remaining_bytes_in_current_sgl); |
| if (status == SCI_SUCCESS) { |
| stp_req->type.pio.pio_transfer_bytes -= remaining_bytes_in_current_sgl; |
| |
| /* update the current sgl, sgl_offset and save for future */ |
| current_sgl = scic_sds_stp_request_pio_get_next_sgl(stp_req); |
| sgl_offset = 0; |
| } |
| } else if (stp_req->type.pio.pio_transfer_bytes < remaining_bytes_in_current_sgl) { |
| /* recycle the TC and send the H2D Data FIS from (current sgl + sgl_offset) and length = type.pio.pio_transfer_bytes */ |
| scic_sds_stp_request_pio_data_out_trasmit_data_frame(sci_req, stp_req->type.pio.pio_transfer_bytes); |
| |
| if (status == SCI_SUCCESS) { |
| /* Sgl offset will be adjusted and saved for future */ |
| sgl_offset += stp_req->type.pio.pio_transfer_bytes; |
| current_sgl->address_lower += stp_req->type.pio.pio_transfer_bytes; |
| stp_req->type.pio.pio_transfer_bytes = 0; |
| } |
| } |
| } |
| |
| if (status == SCI_SUCCESS) { |
| stp_req->type.pio.request_current.sgl_offset = sgl_offset; |
| } |
| |
| return status; |
| } |
| |
| /** |
| * |
| * @stp_request: The request that is used for the SGL processing. |
| * @data_buffer: The buffer of data to be copied. |
| * @length: The length of the data transfer. |
| * |
| * Copy the data from the buffer for the length specified to the IO reqeust SGL |
| * specified data region. enum sci_status |
| */ |
| static enum sci_status |
| scic_sds_stp_request_pio_data_in_copy_data_buffer(struct scic_sds_stp_request *stp_req, |
| u8 *data_buf, u32 len) |
| { |
| struct scic_sds_request *sci_req; |
| struct isci_request *ireq; |
| u8 *src_addr; |
| int copy_len; |
| struct sas_task *task; |
| struct scatterlist *sg; |
| void *kaddr; |
| int total_len = len; |
| |
| sci_req = to_sci_req(stp_req); |
| ireq = sci_req_to_ireq(sci_req); |
| task = isci_request_access_task(ireq); |
| src_addr = data_buf; |
| |
| if (task->num_scatter > 0) { |
| sg = task->scatter; |
| |
| while (total_len > 0) { |
| struct page *page = sg_page(sg); |
| |
| copy_len = min_t(int, total_len, sg_dma_len(sg)); |
| kaddr = kmap_atomic(page, KM_IRQ0); |
| memcpy(kaddr + sg->offset, src_addr, copy_len); |
| kunmap_atomic(kaddr, KM_IRQ0); |
| total_len -= copy_len; |
| src_addr += copy_len; |
| sg = sg_next(sg); |
| } |
| } else { |
| BUG_ON(task->total_xfer_len < total_len); |
| memcpy(task->scatter, src_addr, total_len); |
| } |
| |
| return SCI_SUCCESS; |
| } |
| |
| /** |
| * |
| * @sci_req: The PIO DATA IN request that is to receive the data. |
| * @data_buffer: The buffer to copy from. |
| * |
| * Copy the data buffer to the io request data region. enum sci_status |
| */ |
| static enum sci_status scic_sds_stp_request_pio_data_in_copy_data( |
| struct scic_sds_stp_request *sci_req, |
| u8 *data_buffer) |
| { |
| enum sci_status status; |
| |
| /* |
| * If there is less than 1K remaining in the transfer request |
| * copy just the data for the transfer */ |
| if (sci_req->type.pio.pio_transfer_bytes < SCU_MAX_FRAME_BUFFER_SIZE) { |
| status = scic_sds_stp_request_pio_data_in_copy_data_buffer( |
| sci_req, data_buffer, sci_req->type.pio.pio_transfer_bytes); |
| |
| if (status == SCI_SUCCESS) |
| sci_req->type.pio.pio_transfer_bytes = 0; |
| } else { |
| /* We are transfering the whole frame so copy */ |
| status = scic_sds_stp_request_pio_data_in_copy_data_buffer( |
| sci_req, data_buffer, SCU_MAX_FRAME_BUFFER_SIZE); |
| |
| if (status == SCI_SUCCESS) |
| sci_req->type.pio.pio_transfer_bytes -= SCU_MAX_FRAME_BUFFER_SIZE; |
| } |
| |
| return status; |
| } |
| |
| /** |
| * |
| * @sci_req: |
| * @completion_code: |
| * |
| * enum sci_status |
| */ |
| static enum sci_status scic_sds_stp_request_pio_await_h2d_completion_tc_completion_handler( |
| struct scic_sds_request *sci_req, |
| u32 completion_code) |
| { |
| enum sci_status status = SCI_SUCCESS; |
| |
| switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { |
| case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): |
| scic_sds_request_set_status( |
| sci_req, SCU_TASK_DONE_GOOD, SCI_SUCCESS |
| ); |
| |
| sci_base_state_machine_change_state( |
| &sci_req->started_substate_machine, |
| SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE |
| ); |
| break; |
| |
| default: |
| /* |
| * All other completion status cause the IO to be complete. If a NAK |
| * was received, then it is up to the user to retry the request. */ |
| scic_sds_request_set_status( |
| sci_req, |
| SCU_NORMALIZE_COMPLETION_STATUS(completion_code), |
| SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR |
| ); |
| |
| sci_base_state_machine_change_state( |
| &sci_req->state_machine, |
| SCI_BASE_REQUEST_STATE_COMPLETED |
| ); |
| break; |
| } |
| |
| return status; |
| } |
| |
| static enum sci_status scic_sds_stp_request_pio_await_frame_frame_handler(struct scic_sds_request *sci_req, |
| u32 frame_index) |
| { |
| struct scic_sds_controller *scic = sci_req->owning_controller; |
| struct scic_sds_stp_request *stp_req = &sci_req->stp.req; |
| struct isci_request *ireq = sci_req_to_ireq(sci_req); |
| struct sas_task *task = isci_request_access_task(ireq); |
| struct dev_to_host_fis *frame_header; |
| enum sci_status status; |
| u32 *frame_buffer; |
| |
| status = scic_sds_unsolicited_frame_control_get_header(&scic->uf_control, |
| frame_index, |
| (void **)&frame_header); |
| |
| if (status != SCI_SUCCESS) { |
| dev_err(scic_to_dev(scic), |
| "%s: SCIC IO Request 0x%p could not get frame header " |
| "for frame index %d, status %x\n", |
| __func__, stp_req, frame_index, status); |
| return status; |
| } |
| |
| switch (frame_header->fis_type) { |
| case FIS_PIO_SETUP: |
| /* Get from the frame buffer the PIO Setup Data */ |
| scic_sds_unsolicited_frame_control_get_buffer(&scic->uf_control, |
| frame_index, |
| (void **)&frame_buffer); |
| |
| /* Get the data from the PIO Setup The SCU Hardware returns |
| * first word in the frame_header and the rest of the data is in |
| * the frame buffer so we need to back up one dword |
| */ |
| |
| /* transfer_count: first 16bits in the 4th dword */ |
| stp_req->type.pio.pio_transfer_bytes = frame_buffer[3] & 0xffff; |
| |
| /* ending_status: 4th byte in the 3rd dword */ |
| stp_req->type.pio.ending_status = (frame_buffer[2] >> 24) & 0xff; |
| |
| scic_sds_controller_copy_sata_response(&sci_req->stp.rsp, |
| frame_header, |
| frame_buffer); |
| |
| sci_req->stp.rsp.status = stp_req->type.pio.ending_status; |
| |
| /* The next state is dependent on whether the |
| * request was PIO Data-in or Data out |
| */ |
| if (task->data_dir == DMA_FROM_DEVICE) { |
| sci_base_state_machine_change_state(&sci_req->started_substate_machine, |
| SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_IN_AWAIT_DATA_SUBSTATE); |
| } else if (task->data_dir == DMA_TO_DEVICE) { |
| /* Transmit data */ |
| status = scic_sds_stp_request_pio_data_out_transmit_data(sci_req); |
| if (status != SCI_SUCCESS) |
| break; |
| sci_base_state_machine_change_state(&sci_req->started_substate_machine, |
| SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_OUT_TRANSMIT_DATA_SUBSTATE); |
| } |
| break; |
| case FIS_SETDEVBITS: |
| sci_base_state_machine_change_state(&sci_req->started_substate_machine, |
| SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE); |
| break; |
| case FIS_REGD2H: |
| if (frame_header->status & ATA_BUSY) { |
| /* Now why is the drive sending a D2H Register FIS when |
| * it is still busy? Do nothing since we are still in |
| * the right state. |
| */ |
| dev_dbg(scic_to_dev(scic), |
| "%s: SCIC PIO Request 0x%p received " |
| "D2H Register FIS with BSY status " |
| "0x%x\n", __func__, stp_req, |
| frame_header->status); |
| break; |
| } |
| |
| scic_sds_unsolicited_frame_control_get_buffer(&scic->uf_control, |
| frame_index, |
| (void **)&frame_buffer); |
| |
| scic_sds_controller_copy_sata_response(&sci_req->stp.req, |
| frame_header, |
| frame_buffer); |
| |
| scic_sds_request_set_status(sci_req, |
| SCU_TASK_DONE_CHECK_RESPONSE, |
| SCI_FAILURE_IO_RESPONSE_VALID); |
| |
| sci_base_state_machine_change_state(&sci_req->state_machine, |
| SCI_BASE_REQUEST_STATE_COMPLETED); |
| break; |
| default: |
| /* FIXME: what do we do here? */ |
| break; |
| } |
| |
| /* Frame is decoded return it to the controller */ |
| scic_sds_controller_release_frame(scic, frame_index); |
| |
| return status; |
| } |
| |
| static enum sci_status scic_sds_stp_request_pio_data_in_await_data_frame_handler(struct scic_sds_request *sci_req, |
| u32 frame_index) |
| { |
| enum sci_status status; |
| struct dev_to_host_fis *frame_header; |
| struct sata_fis_data *frame_buffer; |
| struct scic_sds_stp_request *stp_req = &sci_req->stp.req; |
| struct scic_sds_controller *scic = sci_req->owning_controller; |
| |
| status = scic_sds_unsolicited_frame_control_get_header(&scic->uf_control, |
| frame_index, |
| (void **)&frame_header); |
| |
| if (status != SCI_SUCCESS) { |
| dev_err(scic_to_dev(scic), |
| "%s: SCIC IO Request 0x%p could not get frame header " |
| "for frame index %d, status %x\n", |
| __func__, stp_req, frame_index, status); |
| return status; |
| } |
| |
| if (frame_header->fis_type == FIS_DATA) { |
| if (stp_req->type.pio.request_current.sgl_pair == NULL) { |
| sci_req->saved_rx_frame_index = frame_index; |
| stp_req->type.pio.pio_transfer_bytes = 0; |
| } else { |
| scic_sds_unsolicited_frame_control_get_buffer(&scic->uf_control, |
| frame_index, |
| (void **)&frame_buffer); |
| |
| status = scic_sds_stp_request_pio_data_in_copy_data(stp_req, |
| (u8 *)frame_buffer); |
| |
| /* Frame is decoded return it to the controller */ |
| scic_sds_controller_release_frame(scic, frame_index); |
| } |
| |
| /* Check for the end of the transfer, are there more |
| * bytes remaining for this data transfer |
| */ |
| if (status != SCI_SUCCESS || |
| stp_req->type.pio.pio_transfer_bytes != 0) |
| return status; |
| |
| if ((stp_req->type.pio.ending_status & ATA_BUSY) == 0) { |
| scic_sds_request_set_status(sci_req, |
| SCU_TASK_DONE_CHECK_RESPONSE, |
| SCI_FAILURE_IO_RESPONSE_VALID); |
| |
| sci_base_state_machine_change_state(&sci_req->state_machine, |
| SCI_BASE_REQUEST_STATE_COMPLETED); |
| } else { |
| sci_base_state_machine_change_state(&sci_req->started_substate_machine, |
| SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE); |
| } |
| } else { |
| dev_err(scic_to_dev(scic), |
| "%s: SCIC PIO Request 0x%p received frame %d " |
| "with fis type 0x%02x when expecting a data " |
| "fis.\n", __func__, stp_req, frame_index, |
| frame_header->fis_type); |
| |
| scic_sds_request_set_status(sci_req, |
| SCU_TASK_DONE_GOOD, |
| SCI_FAILURE_IO_REQUIRES_SCSI_ABORT); |
| |
| sci_base_state_machine_change_state(&sci_req->state_machine, |
| SCI_BASE_REQUEST_STATE_COMPLETED); |
| |
| /* Frame is decoded return it to the controller */ |
| scic_sds_controller_release_frame(scic, frame_index); |
| } |
| |
| return status; |
| } |
| |
| |
| /** |
| * |
| * @sci_req: |
| * @completion_code: |
| * |
| * enum sci_status |
| */ |
| static enum sci_status scic_sds_stp_request_pio_data_out_await_data_transmit_completion_tc_completion_handler( |
| |
| struct scic_sds_request *sci_req, |
| u32 completion_code) |
| { |
| enum sci_status status = SCI_SUCCESS; |
| bool all_frames_transferred = false; |
| struct scic_sds_stp_request *stp_req = &sci_req->stp.req; |
| |
| switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { |
| case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): |
| /* Transmit data */ |
| if (stp_req->type.pio.pio_transfer_bytes != 0) { |
| status = scic_sds_stp_request_pio_data_out_transmit_data(sci_req); |
| if (status == SCI_SUCCESS) { |
| if (stp_req->type.pio.pio_transfer_bytes == 0) |
| all_frames_transferred = true; |
| } |
| } else if (stp_req->type.pio.pio_transfer_bytes == 0) { |
| /* |
| * this will happen if the all data is written at the |
| * first time after the pio setup fis is received |
| */ |
| all_frames_transferred = true; |
| } |
| |
| /* all data transferred. */ |
| if (all_frames_transferred) { |
| /* |
| * Change the state to SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_IN_AWAIT_FRAME_SUBSTATE |
| * and wait for PIO_SETUP fis / or D2H REg fis. */ |
| sci_base_state_machine_change_state( |
| &sci_req->started_substate_machine, |
| SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE |
| ); |
| } |
| break; |
| |
| default: |
| /* |
| * All other completion status cause the IO to be complete. If a NAK |
| * was received, then it is up to the user to retry the request. */ |
| scic_sds_request_set_status( |
| sci_req, |
| SCU_NORMALIZE_COMPLETION_STATUS(completion_code), |
| SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR |
| ); |
| |
| sci_base_state_machine_change_state( |
| &sci_req->state_machine, |
| SCI_BASE_REQUEST_STATE_COMPLETED |
| ); |
| break; |
| } |
| |
| return status; |
| } |
| |
| /** |
| * |
| * @request: This is the request which is receiving the event. |
| * @event_code: This is the event code that the request on which the request is |
| * expected to take action. |
| * |
| * This method will handle any link layer events while waiting for the data |
| * frame. enum sci_status SCI_SUCCESS SCI_FAILURE |
| */ |
| static enum sci_status scic_sds_stp_request_pio_data_in_await_data_event_handler( |
| struct scic_sds_request *request, |
| u32 event_code) |
| { |
| enum sci_status status; |
| |
| switch (scu_get_event_specifier(event_code)) { |
| case SCU_TASK_DONE_CRC_ERR << SCU_EVENT_SPECIFIC_CODE_SHIFT: |
| /* |
| * We are waiting for data and the SCU has R_ERR the data frame. |
| * Go back to waiting for the D2H Register FIS */ |
| sci_base_state_machine_change_state( |
| &request->started_substate_machine, |
| SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE |
| ); |
| |
| status = SCI_SUCCESS; |
| break; |
| |
| default: |
| dev_err(scic_to_dev(request->owning_controller), |
| "%s: SCIC PIO Request 0x%p received unexpected " |
| "event 0x%08x\n", |
| __func__, request, event_code); |
| |
| /* / @todo Should we fail the PIO request when we get an unexpected event? */ |
| status = SCI_FAILURE; |
| break; |
| } |
| |
| return status; |
| } |
| |
| /* --------------------------------------------------------------------------- */ |
| |
| static const struct scic_sds_io_request_state_handler scic_sds_stp_request_started_pio_substate_handler_table[] = { |
| [SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_H2D_COMPLETION_SUBSTATE] = { |
| .abort_handler = scic_sds_request_started_state_abort_handler, |
| .tc_completion_handler = scic_sds_stp_request_pio_await_h2d_completion_tc_completion_handler, |
| }, |
| [SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE] = { |
| .abort_handler = scic_sds_request_started_state_abort_handler, |
| .frame_handler = scic_sds_stp_request_pio_await_frame_frame_handler |
| }, |
| [SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_IN_AWAIT_DATA_SUBSTATE] = { |
| .abort_handler = scic_sds_request_started_state_abort_handler, |
| .event_handler = scic_sds_stp_request_pio_data_in_await_data_event_handler, |
| .frame_handler = scic_sds_stp_request_pio_data_in_await_data_frame_handler |
| }, |
| [SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_OUT_TRANSMIT_DATA_SUBSTATE] = { |
| .abort_handler = scic_sds_request_started_state_abort_handler, |
| .tc_completion_handler = scic_sds_stp_request_pio_data_out_await_data_transmit_completion_tc_completion_handler, |
| } |
| }; |
| |
| static void scic_sds_stp_request_started_pio_await_h2d_completion_enter( |
| void *object) |
| { |
| struct scic_sds_request *sci_req = object; |
| |
| SET_STATE_HANDLER( |
| sci_req, |
| scic_sds_stp_request_started_pio_substate_handler_table, |
| SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_H2D_COMPLETION_SUBSTATE |
| ); |
| |
| scic_sds_remote_device_set_working_request( |
| sci_req->target_device, sci_req); |
| } |
| |
| static void scic_sds_stp_request_started_pio_await_frame_enter(void *object) |
| { |
| struct scic_sds_request *sci_req = object; |
| |
| SET_STATE_HANDLER( |
| sci_req, |
| scic_sds_stp_request_started_pio_substate_handler_table, |
| SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE |
| ); |
| } |
| |
| static void scic_sds_stp_request_started_pio_data_in_await_data_enter( |
| void *object) |
| { |
| struct scic_sds_request *sci_req = object; |
| |
| SET_STATE_HANDLER( |
| sci_req, |
| scic_sds_stp_request_started_pio_substate_handler_table, |
| SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_IN_AWAIT_DATA_SUBSTATE |
| ); |
| } |
| |
| static void scic_sds_stp_request_started_pio_data_out_transmit_data_enter( |
| void *object) |
| { |
| struct scic_sds_request *sci_req = object; |
| |
| SET_STATE_HANDLER( |
| sci_req, |
| scic_sds_stp_request_started_pio_substate_handler_table, |
| SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_OUT_TRANSMIT_DATA_SUBSTATE |
| ); |
| } |
| |
| /* --------------------------------------------------------------------------- */ |
| |
| static const struct sci_base_state scic_sds_stp_request_started_pio_substate_table[] = { |
| [SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_H2D_COMPLETION_SUBSTATE] = { |
| .enter_state = scic_sds_stp_request_started_pio_await_h2d_completion_enter, |
| }, |
| [SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE] = { |
| .enter_state = scic_sds_stp_request_started_pio_await_frame_enter, |
| }, |
| [SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_IN_AWAIT_DATA_SUBSTATE] = { |
| .enter_state = scic_sds_stp_request_started_pio_data_in_await_data_enter, |
| }, |
| [SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_OUT_TRANSMIT_DATA_SUBSTATE] = { |
| .enter_state = scic_sds_stp_request_started_pio_data_out_transmit_data_enter, |
| } |
| }; |
| |
| enum sci_status |
| scic_sds_stp_pio_request_construct(struct scic_sds_request *sci_req, |
| bool copy_rx_frame) |
| { |
| struct scic_sds_stp_request *stp_req = &sci_req->stp.req; |
| struct scic_sds_stp_pio_request *pio = &stp_req->type.pio; |
| |
| scic_sds_stp_non_ncq_request_construct(sci_req); |
| |
| scu_stp_raw_request_construct_task_context(stp_req, |
| sci_req->task_context_buffer); |
| |
| pio->current_transfer_bytes = 0; |
| pio->ending_error = 0; |
| pio->ending_status = 0; |
| |
| pio->request_current.sgl_offset = 0; |
| pio->request_current.sgl_set = SCU_SGL_ELEMENT_PAIR_A; |
| |
| if (copy_rx_frame) { |
| scic_sds_request_build_sgl(sci_req); |
| /* Since the IO request copy of the TC contains the same data as |
| * the actual TC this pointer is vaild for either. |
| */ |
| pio->request_current.sgl_pair = &sci_req->task_context_buffer->sgl_pair_ab; |
| } else { |
| /* The user does not want the data copied to the SGL buffer location */ |
| pio->request_current.sgl_pair = NULL; |
| } |
| |
| sci_base_state_machine_construct(&sci_req->started_substate_machine, |
| sci_req, |
| scic_sds_stp_request_started_pio_substate_table, |
| SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_H2D_COMPLETION_SUBSTATE); |
| |
| return SCI_SUCCESS; |
| } |
| |
| static void scic_sds_stp_request_udma_complete_request( |
| struct scic_sds_request *request, |
| u32 scu_status, |
| enum sci_status sci_status) |
| { |
| scic_sds_request_set_status(request, scu_status, sci_status); |
| sci_base_state_machine_change_state(&request->state_machine, |
| SCI_BASE_REQUEST_STATE_COMPLETED); |
| } |
| |
| static enum sci_status scic_sds_stp_request_udma_general_frame_handler(struct scic_sds_request *sci_req, |
| u32 frame_index) |
| { |
| struct scic_sds_controller *scic = sci_req->owning_controller; |
| struct dev_to_host_fis *frame_header; |
| enum sci_status status; |
| u32 *frame_buffer; |
| |
| status = scic_sds_unsolicited_frame_control_get_header(&scic->uf_control, |
| frame_index, |
| (void **)&frame_header); |
| |
| if ((status == SCI_SUCCESS) && |
| (frame_header->fis_type == FIS_REGD2H)) { |
| scic_sds_unsolicited_frame_control_get_buffer(&scic->uf_control, |
| frame_index, |
| (void **)&frame_buffer); |
| |
| scic_sds_controller_copy_sata_response(&sci_req->stp.rsp, |
| frame_header, |
| frame_buffer); |
| } |
| |
| scic_sds_controller_release_frame(scic, frame_index); |
| |
| return status; |
| } |
| |
| static enum sci_status scic_sds_stp_request_udma_await_tc_completion_tc_completion_handler( |
| struct scic_sds_request *sci_req, |
| u32 completion_code) |
| { |
| enum sci_status status = SCI_SUCCESS; |
| |
| switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { |
| case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): |
| scic_sds_stp_request_udma_complete_request(sci_req, |
| SCU_TASK_DONE_GOOD, |
| SCI_SUCCESS); |
| break; |
| case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_UNEXP_FIS): |
| case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_REG_ERR): |
| /* |
| * We must check ther response buffer to see if the D2H Register FIS was |
| * received before we got the TC completion. */ |
| if (sci_req->stp.rsp.fis_type == FIS_REGD2H) { |
| scic_sds_remote_device_suspend(sci_req->target_device, |
| SCU_EVENT_SPECIFIC(SCU_NORMALIZE_COMPLETION_STATUS(completion_code))); |
| |
| scic_sds_stp_request_udma_complete_request(sci_req, |
| SCU_TASK_DONE_CHECK_RESPONSE, |
| SCI_FAILURE_IO_RESPONSE_VALID); |
| } else { |
| /* |
| * If we have an error completion status for the TC then we can expect a |
| * D2H register FIS from the device so we must change state to wait for it */ |
| sci_base_state_machine_change_state(&sci_req->started_substate_machine, |
| SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_D2H_REG_FIS_SUBSTATE); |
| } |
| break; |
| |
| /* |
| * / @todo Check to see if any of these completion status need to wait for |
| * / the device to host register fis. */ |
| /* / @todo We can retry the command for SCU_TASK_DONE_CMD_LL_R_ERR - this comes only for B0 */ |
| case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_INV_FIS_LEN): |
| case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_MAX_PLD_ERR): |
| case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_LL_R_ERR): |
| case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_CMD_LL_R_ERR): |
| case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_CRC_ERR): |
| scic_sds_remote_device_suspend(sci_req->target_device, |
| SCU_EVENT_SPECIFIC(SCU_NORMALIZE_COMPLETION_STATUS(completion_code))); |
| /* Fall through to the default case */ |
| default: |
| /* All other completion status cause the IO to be complete. */ |
| scic_sds_stp_request_udma_complete_request(sci_req, |
| SCU_NORMALIZE_COMPLETION_STATUS(completion_code), |
| SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR); |
| break; |
| } |
| |
| return status; |
| } |
| |
| static enum sci_status scic_sds_stp_request_udma_await_d2h_reg_fis_frame_handler( |
| struct scic_sds_request *sci_req, |
| u32 frame_index) |
| { |
| enum sci_status status; |
| |
| /* Use the general frame handler to copy the resposne data */ |
| status = scic_sds_stp_request_udma_general_frame_handler(sci_req, frame_index); |
| |
| if (status != SCI_SUCCESS) |
| return status; |
| |
| scic_sds_stp_request_udma_complete_request(sci_req, |
| SCU_TASK_DONE_CHECK_RESPONSE, |
| SCI_FAILURE_IO_RESPONSE_VALID); |
| |
| return status; |
| } |
| |
| /* --------------------------------------------------------------------------- */ |
| |
| static const struct scic_sds_io_request_state_handler scic_sds_stp_request_started_udma_substate_handler_table[] = { |
| [SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_TC_COMPLETION_SUBSTATE] = { |
| .abort_handler = scic_sds_request_started_state_abort_handler, |
| .tc_completion_handler = scic_sds_stp_request_udma_await_tc_completion_tc_completion_handler, |
| .frame_handler = scic_sds_stp_request_udma_general_frame_handler, |
| }, |
| [SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_D2H_REG_FIS_SUBSTATE] = { |
| .abort_handler = scic_sds_request_started_state_abort_handler, |
| .frame_handler = scic_sds_stp_request_udma_await_d2h_reg_fis_frame_handler, |
| }, |
| }; |
| |
| static void scic_sds_stp_request_started_udma_await_tc_completion_enter( |
| void *object) |
| { |
| struct scic_sds_request *sci_req = object; |
| |
| SET_STATE_HANDLER( |
| sci_req, |
| scic_sds_stp_request_started_udma_substate_handler_table, |
| SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_TC_COMPLETION_SUBSTATE |
| ); |
| } |
| |
| /** |
| * |
| * |
| * This state is entered when there is an TC completion failure. The hardware |
| * received an unexpected condition while processing the IO request and now |
| * will UF the D2H register FIS to complete the IO. |
| */ |
| static void scic_sds_stp_request_started_udma_await_d2h_reg_fis_enter( |
| void *object) |
| { |
| struct scic_sds_request *sci_req = object; |
| |
| SET_STATE_HANDLER( |
| sci_req, |
| scic_sds_stp_request_started_udma_substate_handler_table, |
| SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_D2H_REG_FIS_SUBSTATE |
| ); |
| } |
| |
| /* --------------------------------------------------------------------------- */ |
| |
| static const struct sci_base_state scic_sds_stp_request_started_udma_substate_table[] = { |
| [SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_TC_COMPLETION_SUBSTATE] = { |
| .enter_state = scic_sds_stp_request_started_udma_await_tc_completion_enter, |
| }, |
| [SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_D2H_REG_FIS_SUBSTATE] = { |
| .enter_state = scic_sds_stp_request_started_udma_await_d2h_reg_fis_enter, |
| }, |
| }; |
| |
| enum sci_status scic_sds_stp_udma_request_construct(struct scic_sds_request *sci_req, |
| u32 len, |
| enum dma_data_direction dir) |
| { |
| scic_sds_stp_non_ncq_request_construct(sci_req); |
| |
| scic_sds_stp_optimized_request_construct(sci_req, SCU_TASK_TYPE_DMA_IN, |
| len, dir); |
| |
| sci_base_state_machine_construct( |
| &sci_req->started_substate_machine, |
| sci_req, |
| scic_sds_stp_request_started_udma_substate_table, |
| SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_TC_COMPLETION_SUBSTATE |
| ); |
| |
| return SCI_SUCCESS; |
| } |
| |
| /** |
| * |
| * @sci_req: |
| * @completion_code: |
| * |
| * This method processes a TC completion. The expected TC completion is for |
| * the transmission of the H2D register FIS containing the SATA/STP non-data |
| * request. This method always successfully processes the TC completion. |
| * SCI_SUCCESS This value is always returned. |
| */ |
| static enum sci_status scic_sds_stp_request_soft_reset_await_h2d_asserted_tc_completion_handler( |
| struct scic_sds_request *sci_req, |
| u32 completion_code) |
| { |
| switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { |
| case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): |
| scic_sds_request_set_status( |
| sci_req, SCU_TASK_DONE_GOOD, SCI_SUCCESS |
| ); |
| |
| sci_base_state_machine_change_state( |
| &sci_req->started_substate_machine, |
| SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_DIAGNOSTIC_COMPLETION_SUBSTATE |
| ); |
| break; |
| |
| default: |
| /* |
| * All other completion status cause the IO to be complete. If a NAK |
| * was received, then it is up to the user to retry the request. */ |
| scic_sds_request_set_status( |
| sci_req, |
| SCU_NORMALIZE_COMPLETION_STATUS(completion_code), |
| SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR |
| ); |
| |
| sci_base_state_machine_change_state( |
| &sci_req->state_machine, SCI_BASE_REQUEST_STATE_COMPLETED); |
| break; |
| } |
| |
| return SCI_SUCCESS; |
| } |
| |
| /** |
| * |
| * @sci_req: |
| * @completion_code: |
| * |
| * This method processes a TC completion. The expected TC completion is for |
| * the transmission of the H2D register FIS containing the SATA/STP non-data |
| * request. This method always successfully processes the TC completion. |
| * SCI_SUCCESS This value is always returned. |
| */ |
| static enum sci_status scic_sds_stp_request_soft_reset_await_h2d_diagnostic_tc_completion_handler( |
| struct scic_sds_request *sci_req, |
| u32 completion_code) |
| { |
| switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { |
| case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): |
| scic_sds_request_set_status( |
| sci_req, SCU_TASK_DONE_GOOD, SCI_SUCCESS |
| ); |
| |
| sci_base_state_machine_change_state( |
| &sci_req->started_substate_machine, |
| SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_D2H_RESPONSE_FRAME_SUBSTATE |
| ); |
| break; |
| |
| default: |
| /* |
| * All other completion status cause the IO to be complete. If a NAK |
| * was received, then it is up to the user to retry the request. */ |
| scic_sds_request_set_status( |
| sci_req, |
| SCU_NORMALIZE_COMPLETION_STATUS(completion_code), |
| SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR |
| ); |
| |
| sci_base_state_machine_change_state(&sci_req->state_machine, |
| SCI_BASE_REQUEST_STATE_COMPLETED); |
| break; |
| } |
| |
| return SCI_SUCCESS; |
| } |
| |
| /** |
| * |
| * @request: This parameter specifies the request for which a frame has been |
| * received. |
| * @frame_index: This parameter specifies the index of the frame that has been |
| * received. |
| * |
| * This method processes frames received from the target while waiting for a |
| * device to host register FIS. If a non-register FIS is received during this |
| * time, it is treated as a protocol violation from an IO perspective. Indicate |
| * if the received frame was processed successfully. |
| */ |
| static enum sci_status scic_sds_stp_request_soft_reset_await_d2h_frame_handler( |
| struct scic_sds_request *sci_req, |
| u32 frame_index) |
| { |
| enum sci_status status; |
| struct dev_to_host_fis *frame_header; |
| u32 *frame_buffer; |
| struct scic_sds_stp_request *stp_req = &sci_req->stp.req; |
| struct scic_sds_controller *scic = sci_req->owning_controller; |
| |
| status = scic_sds_unsolicited_frame_control_get_header(&scic->uf_control, |
| frame_index, |
| (void **)&frame_header); |
| if (status != SCI_SUCCESS) { |
| dev_err(scic_to_dev(scic), |
| "%s: SCIC IO Request 0x%p could not get frame header " |
| "for frame index %d, status %x\n", |
| __func__, stp_req, frame_index, status); |
| return status; |
| } |
| |
| switch (frame_header->fis_type) { |
| case FIS_REGD2H: |
| scic_sds_unsolicited_frame_control_get_buffer(&scic->uf_control, |
| frame_index, |
| (void **)&frame_buffer); |
| |
| scic_sds_controller_copy_sata_response(&sci_req->stp.rsp, |
| frame_header, |
| frame_buffer); |
| |
| /* The command has completed with error */ |
| scic_sds_request_set_status(sci_req, |
| SCU_TASK_DONE_CHECK_RESPONSE, |
| SCI_FAILURE_IO_RESPONSE_VALID); |
| break; |
| |
| default: |
| dev_warn(scic_to_dev(scic), |
| "%s: IO Request:0x%p Frame Id:%d protocol " |
| "violation occurred\n", __func__, stp_req, |
| frame_index); |
| |
| scic_sds_request_set_status(sci_req, SCU_TASK_DONE_UNEXP_FIS, |
| SCI_FAILURE_PROTOCOL_VIOLATION); |
| break; |
| } |
| |
| sci_base_state_machine_change_state(&sci_req->state_machine, |
| SCI_BASE_REQUEST_STATE_COMPLETED); |
| |
| /* Frame has been decoded return it to the controller */ |
| scic_sds_controller_release_frame(scic, frame_index); |
| |
| return status; |
| } |
| |
| /* --------------------------------------------------------------------------- */ |
| |
| static const struct scic_sds_io_request_state_handler scic_sds_stp_request_started_soft_reset_substate_handler_table[] = { |
| [SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_ASSERTED_COMPLETION_SUBSTATE] = { |
| .abort_handler = scic_sds_request_started_state_abort_handler, |
| .tc_completion_handler = scic_sds_stp_request_soft_reset_await_h2d_asserted_tc_completion_handler, |
| }, |
| [SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_DIAGNOSTIC_COMPLETION_SUBSTATE] = { |
| .abort_handler = scic_sds_request_started_state_abort_handler, |
| .tc_completion_handler = scic_sds_stp_request_soft_reset_await_h2d_diagnostic_tc_completion_handler, |
| }, |
| [SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_D2H_RESPONSE_FRAME_SUBSTATE] = { |
| .abort_handler = scic_sds_request_started_state_abort_handler, |
| .frame_handler = scic_sds_stp_request_soft_reset_await_d2h_frame_handler, |
| }, |
| }; |
| |
| static void scic_sds_stp_request_started_soft_reset_await_h2d_asserted_completion_enter( |
| void *object) |
| { |
| struct scic_sds_request *sci_req = object; |
| |
| SET_STATE_HANDLER( |
| sci_req, |
| scic_sds_stp_request_started_soft_reset_substate_handler_table, |
| SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_ASSERTED_COMPLETION_SUBSTATE |
| ); |
| |
| scic_sds_remote_device_set_working_request( |
| sci_req->target_device, sci_req |
| ); |
| } |
| |
| static void scic_sds_stp_request_started_soft_reset_await_h2d_diagnostic_completion_enter( |
| void *object) |
| { |
| struct scic_sds_request *sci_req = object; |
| struct scu_task_context *task_context; |
| struct host_to_dev_fis *h2d_fis; |
| enum sci_status status; |
| |
| /* Clear the SRST bit */ |
| h2d_fis = &sci_req->stp.cmd; |
| h2d_fis->control = 0; |
| |
| /* Clear the TC control bit */ |
| task_context = scic_sds_controller_get_task_context_buffer( |
| sci_req->owning_controller, sci_req->io_tag); |
| task_context->control_frame = 0; |
| |
| status = scic_controller_continue_io(sci_req); |
| if (status == SCI_SUCCESS) { |
| SET_STATE_HANDLER( |
| sci_req, |
| scic_sds_stp_request_started_soft_reset_substate_handler_table, |
| SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_DIAGNOSTIC_COMPLETION_SUBSTATE |
| ); |
| } |
| } |
| |
| static void scic_sds_stp_request_started_soft_reset_await_d2h_response_enter( |
| void *object) |
| { |
| struct scic_sds_request *sci_req = object; |
| |
| SET_STATE_HANDLER( |
| sci_req, |
| scic_sds_stp_request_started_soft_reset_substate_handler_table, |
| SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_D2H_RESPONSE_FRAME_SUBSTATE |
| ); |
| } |
| |
| static const struct sci_base_state scic_sds_stp_request_started_soft_reset_substate_table[] = { |
| [SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_ASSERTED_COMPLETION_SUBSTATE] = { |
| .enter_state = scic_sds_stp_request_started_soft_reset_await_h2d_asserted_completion_enter, |
| }, |
| [SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_DIAGNOSTIC_COMPLETION_SUBSTATE] = { |
| .enter_state = scic_sds_stp_request_started_soft_reset_await_h2d_diagnostic_completion_enter, |
| }, |
| [SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_D2H_RESPONSE_FRAME_SUBSTATE] = { |
| .enter_state = scic_sds_stp_request_started_soft_reset_await_d2h_response_enter, |
| }, |
| }; |
| |
| enum sci_status scic_sds_stp_soft_reset_request_construct(struct scic_sds_request *sci_req) |
| { |
| struct scic_sds_stp_request *stp_req = &sci_req->stp.req; |
| |
| scic_sds_stp_non_ncq_request_construct(sci_req); |
| |
| /* Build the STP task context structure */ |
| scu_stp_raw_request_construct_task_context(stp_req, sci_req->task_context_buffer); |
| |
| sci_base_state_machine_construct(&sci_req->started_substate_machine, |
| sci_req, |
| scic_sds_stp_request_started_soft_reset_substate_table, |
| SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_ASSERTED_COMPLETION_SUBSTATE); |
| |
| return SCI_SUCCESS; |
| } |