|  | /* | 
|  | * Copyright (c) 2008-2011 Atheros Communications Inc. | 
|  | * | 
|  | * Permission to use, copy, modify, and/or distribute this software for any | 
|  | * purpose with or without fee is hereby granted, provided that the above | 
|  | * copyright notice and this permission notice appear in all copies. | 
|  | * | 
|  | * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES | 
|  | * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF | 
|  | * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR | 
|  | * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES | 
|  | * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN | 
|  | * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF | 
|  | * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. | 
|  | */ | 
|  |  | 
|  | #include <linux/nl80211.h> | 
|  | #include <linux/delay.h> | 
|  | #include "ath9k.h" | 
|  | #include "btcoex.h" | 
|  |  | 
|  | static u8 parse_mpdudensity(u8 mpdudensity) | 
|  | { | 
|  | /* | 
|  | * 802.11n D2.0 defined values for "Minimum MPDU Start Spacing": | 
|  | *   0 for no restriction | 
|  | *   1 for 1/4 us | 
|  | *   2 for 1/2 us | 
|  | *   3 for 1 us | 
|  | *   4 for 2 us | 
|  | *   5 for 4 us | 
|  | *   6 for 8 us | 
|  | *   7 for 16 us | 
|  | */ | 
|  | switch (mpdudensity) { | 
|  | case 0: | 
|  | return 0; | 
|  | case 1: | 
|  | case 2: | 
|  | case 3: | 
|  | /* Our lower layer calculations limit our precision to | 
|  | 1 microsecond */ | 
|  | return 1; | 
|  | case 4: | 
|  | return 2; | 
|  | case 5: | 
|  | return 4; | 
|  | case 6: | 
|  | return 8; | 
|  | case 7: | 
|  | return 16; | 
|  | default: | 
|  | return 0; | 
|  | } | 
|  | } | 
|  |  | 
|  | static bool ath9k_has_pending_frames(struct ath_softc *sc, struct ath_txq *txq) | 
|  | { | 
|  | bool pending = false; | 
|  |  | 
|  | spin_lock_bh(&txq->axq_lock); | 
|  |  | 
|  | if (txq->axq_depth || !list_empty(&txq->axq_acq)) | 
|  | pending = true; | 
|  |  | 
|  | spin_unlock_bh(&txq->axq_lock); | 
|  | return pending; | 
|  | } | 
|  |  | 
|  | static bool ath9k_setpower(struct ath_softc *sc, enum ath9k_power_mode mode) | 
|  | { | 
|  | unsigned long flags; | 
|  | bool ret; | 
|  |  | 
|  | spin_lock_irqsave(&sc->sc_pm_lock, flags); | 
|  | ret = ath9k_hw_setpower(sc->sc_ah, mode); | 
|  | spin_unlock_irqrestore(&sc->sc_pm_lock, flags); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | void ath9k_ps_wakeup(struct ath_softc *sc) | 
|  | { | 
|  | struct ath_common *common = ath9k_hw_common(sc->sc_ah); | 
|  | unsigned long flags; | 
|  | enum ath9k_power_mode power_mode; | 
|  |  | 
|  | spin_lock_irqsave(&sc->sc_pm_lock, flags); | 
|  | if (++sc->ps_usecount != 1) | 
|  | goto unlock; | 
|  |  | 
|  | power_mode = sc->sc_ah->power_mode; | 
|  | ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_AWAKE); | 
|  |  | 
|  | /* | 
|  | * While the hardware is asleep, the cycle counters contain no | 
|  | * useful data. Better clear them now so that they don't mess up | 
|  | * survey data results. | 
|  | */ | 
|  | if (power_mode != ATH9K_PM_AWAKE) { | 
|  | spin_lock(&common->cc_lock); | 
|  | ath_hw_cycle_counters_update(common); | 
|  | memset(&common->cc_survey, 0, sizeof(common->cc_survey)); | 
|  | spin_unlock(&common->cc_lock); | 
|  | } | 
|  |  | 
|  | unlock: | 
|  | spin_unlock_irqrestore(&sc->sc_pm_lock, flags); | 
|  | } | 
|  |  | 
|  | void ath9k_ps_restore(struct ath_softc *sc) | 
|  | { | 
|  | struct ath_common *common = ath9k_hw_common(sc->sc_ah); | 
|  | enum ath9k_power_mode mode; | 
|  | unsigned long flags; | 
|  |  | 
|  | spin_lock_irqsave(&sc->sc_pm_lock, flags); | 
|  | if (--sc->ps_usecount != 0) | 
|  | goto unlock; | 
|  |  | 
|  | if (sc->ps_idle && (sc->ps_flags & PS_WAIT_FOR_TX_ACK)) | 
|  | mode = ATH9K_PM_FULL_SLEEP; | 
|  | else if (sc->ps_enabled && | 
|  | !(sc->ps_flags & (PS_WAIT_FOR_BEACON | | 
|  | PS_WAIT_FOR_CAB | | 
|  | PS_WAIT_FOR_PSPOLL_DATA | | 
|  | PS_WAIT_FOR_TX_ACK))) | 
|  | mode = ATH9K_PM_NETWORK_SLEEP; | 
|  | else | 
|  | goto unlock; | 
|  |  | 
|  | spin_lock(&common->cc_lock); | 
|  | ath_hw_cycle_counters_update(common); | 
|  | spin_unlock(&common->cc_lock); | 
|  |  | 
|  | ath9k_hw_setpower(sc->sc_ah, mode); | 
|  |  | 
|  | unlock: | 
|  | spin_unlock_irqrestore(&sc->sc_pm_lock, flags); | 
|  | } | 
|  |  | 
|  | void ath_start_ani(struct ath_common *common) | 
|  | { | 
|  | struct ath_hw *ah = common->ah; | 
|  | unsigned long timestamp = jiffies_to_msecs(jiffies); | 
|  | struct ath_softc *sc = (struct ath_softc *) common->priv; | 
|  |  | 
|  | if (!(sc->sc_flags & SC_OP_ANI_RUN)) | 
|  | return; | 
|  |  | 
|  | if (sc->sc_flags & SC_OP_OFFCHANNEL) | 
|  | return; | 
|  |  | 
|  | common->ani.longcal_timer = timestamp; | 
|  | common->ani.shortcal_timer = timestamp; | 
|  | common->ani.checkani_timer = timestamp; | 
|  |  | 
|  | mod_timer(&common->ani.timer, | 
|  | jiffies + | 
|  | msecs_to_jiffies((u32)ah->config.ani_poll_interval)); | 
|  | } | 
|  |  | 
|  | static void ath_update_survey_nf(struct ath_softc *sc, int channel) | 
|  | { | 
|  | struct ath_hw *ah = sc->sc_ah; | 
|  | struct ath9k_channel *chan = &ah->channels[channel]; | 
|  | struct survey_info *survey = &sc->survey[channel]; | 
|  |  | 
|  | if (chan->noisefloor) { | 
|  | survey->filled |= SURVEY_INFO_NOISE_DBM; | 
|  | survey->noise = ath9k_hw_getchan_noise(ah, chan); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Updates the survey statistics and returns the busy time since last | 
|  | * update in %, if the measurement duration was long enough for the | 
|  | * result to be useful, -1 otherwise. | 
|  | */ | 
|  | static int ath_update_survey_stats(struct ath_softc *sc) | 
|  | { | 
|  | struct ath_hw *ah = sc->sc_ah; | 
|  | struct ath_common *common = ath9k_hw_common(ah); | 
|  | int pos = ah->curchan - &ah->channels[0]; | 
|  | struct survey_info *survey = &sc->survey[pos]; | 
|  | struct ath_cycle_counters *cc = &common->cc_survey; | 
|  | unsigned int div = common->clockrate * 1000; | 
|  | int ret = 0; | 
|  |  | 
|  | if (!ah->curchan) | 
|  | return -1; | 
|  |  | 
|  | if (ah->power_mode == ATH9K_PM_AWAKE) | 
|  | ath_hw_cycle_counters_update(common); | 
|  |  | 
|  | if (cc->cycles > 0) { | 
|  | survey->filled |= SURVEY_INFO_CHANNEL_TIME | | 
|  | SURVEY_INFO_CHANNEL_TIME_BUSY | | 
|  | SURVEY_INFO_CHANNEL_TIME_RX | | 
|  | SURVEY_INFO_CHANNEL_TIME_TX; | 
|  | survey->channel_time += cc->cycles / div; | 
|  | survey->channel_time_busy += cc->rx_busy / div; | 
|  | survey->channel_time_rx += cc->rx_frame / div; | 
|  | survey->channel_time_tx += cc->tx_frame / div; | 
|  | } | 
|  |  | 
|  | if (cc->cycles < div) | 
|  | return -1; | 
|  |  | 
|  | if (cc->cycles > 0) | 
|  | ret = cc->rx_busy * 100 / cc->cycles; | 
|  |  | 
|  | memset(cc, 0, sizeof(*cc)); | 
|  |  | 
|  | ath_update_survey_nf(sc, pos); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void __ath_cancel_work(struct ath_softc *sc) | 
|  | { | 
|  | cancel_work_sync(&sc->paprd_work); | 
|  | cancel_work_sync(&sc->hw_check_work); | 
|  | cancel_delayed_work_sync(&sc->tx_complete_work); | 
|  | cancel_delayed_work_sync(&sc->hw_pll_work); | 
|  | } | 
|  |  | 
|  | static void ath_cancel_work(struct ath_softc *sc) | 
|  | { | 
|  | __ath_cancel_work(sc); | 
|  | cancel_work_sync(&sc->hw_reset_work); | 
|  | } | 
|  |  | 
|  | static bool ath_prepare_reset(struct ath_softc *sc, bool retry_tx, bool flush) | 
|  | { | 
|  | struct ath_hw *ah = sc->sc_ah; | 
|  | struct ath_common *common = ath9k_hw_common(ah); | 
|  | bool ret; | 
|  |  | 
|  | ieee80211_stop_queues(sc->hw); | 
|  |  | 
|  | sc->hw_busy_count = 0; | 
|  | del_timer_sync(&common->ani.timer); | 
|  |  | 
|  | ath9k_debug_samp_bb_mac(sc); | 
|  | ath9k_hw_disable_interrupts(ah); | 
|  |  | 
|  | ret = ath_drain_all_txq(sc, retry_tx); | 
|  |  | 
|  | if (!ath_stoprecv(sc)) | 
|  | ret = false; | 
|  |  | 
|  | if (!flush) { | 
|  | if (ah->caps.hw_caps & ATH9K_HW_CAP_EDMA) | 
|  | ath_rx_tasklet(sc, 1, true); | 
|  | ath_rx_tasklet(sc, 1, false); | 
|  | } else { | 
|  | ath_flushrecv(sc); | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static bool ath_complete_reset(struct ath_softc *sc, bool start) | 
|  | { | 
|  | struct ath_hw *ah = sc->sc_ah; | 
|  | struct ath_common *common = ath9k_hw_common(ah); | 
|  |  | 
|  | if (ath_startrecv(sc) != 0) { | 
|  | ath_err(common, "Unable to restart recv logic\n"); | 
|  | return false; | 
|  | } | 
|  |  | 
|  | ath9k_cmn_update_txpow(ah, sc->curtxpow, | 
|  | sc->config.txpowlimit, &sc->curtxpow); | 
|  | ath9k_hw_set_interrupts(ah); | 
|  | ath9k_hw_enable_interrupts(ah); | 
|  |  | 
|  | if (!(sc->sc_flags & (SC_OP_OFFCHANNEL)) && start) { | 
|  | if (sc->sc_flags & SC_OP_BEACONS) | 
|  | ath_set_beacon(sc); | 
|  |  | 
|  | ieee80211_queue_delayed_work(sc->hw, &sc->tx_complete_work, 0); | 
|  | ieee80211_queue_delayed_work(sc->hw, &sc->hw_pll_work, HZ/2); | 
|  | if (!common->disable_ani) | 
|  | ath_start_ani(common); | 
|  | } | 
|  |  | 
|  | if ((ah->caps.hw_caps & ATH9K_HW_CAP_ANT_DIV_COMB) && sc->ant_rx != 3) { | 
|  | struct ath_hw_antcomb_conf div_ant_conf; | 
|  | u8 lna_conf; | 
|  |  | 
|  | ath9k_hw_antdiv_comb_conf_get(ah, &div_ant_conf); | 
|  |  | 
|  | if (sc->ant_rx == 1) | 
|  | lna_conf = ATH_ANT_DIV_COMB_LNA1; | 
|  | else | 
|  | lna_conf = ATH_ANT_DIV_COMB_LNA2; | 
|  | div_ant_conf.main_lna_conf = lna_conf; | 
|  | div_ant_conf.alt_lna_conf = lna_conf; | 
|  |  | 
|  | ath9k_hw_antdiv_comb_conf_set(ah, &div_ant_conf); | 
|  | } | 
|  |  | 
|  | ieee80211_wake_queues(sc->hw); | 
|  |  | 
|  | return true; | 
|  | } | 
|  |  | 
|  | static int ath_reset_internal(struct ath_softc *sc, struct ath9k_channel *hchan, | 
|  | bool retry_tx) | 
|  | { | 
|  | struct ath_hw *ah = sc->sc_ah; | 
|  | struct ath_common *common = ath9k_hw_common(ah); | 
|  | struct ath9k_hw_cal_data *caldata = NULL; | 
|  | bool fastcc = true; | 
|  | bool flush = false; | 
|  | int r; | 
|  |  | 
|  | __ath_cancel_work(sc); | 
|  |  | 
|  | spin_lock_bh(&sc->sc_pcu_lock); | 
|  |  | 
|  | if (!(sc->sc_flags & SC_OP_OFFCHANNEL)) { | 
|  | fastcc = false; | 
|  | caldata = &sc->caldata; | 
|  | } | 
|  |  | 
|  | if (!hchan) { | 
|  | fastcc = false; | 
|  | flush = true; | 
|  | hchan = ah->curchan; | 
|  | } | 
|  |  | 
|  | if (fastcc && (ah->chip_fullsleep || | 
|  | !ath9k_hw_check_alive(ah))) | 
|  | fastcc = false; | 
|  |  | 
|  | if (!ath_prepare_reset(sc, retry_tx, flush)) | 
|  | fastcc = false; | 
|  |  | 
|  | ath_dbg(common, CONFIG, "Reset to %u MHz, HT40: %d fastcc: %d\n", | 
|  | hchan->channel, !!(hchan->channelFlags & (CHANNEL_HT40MINUS | | 
|  | CHANNEL_HT40PLUS)), | 
|  | fastcc); | 
|  |  | 
|  | r = ath9k_hw_reset(ah, hchan, caldata, fastcc); | 
|  | if (r) { | 
|  | ath_err(common, | 
|  | "Unable to reset channel, reset status %d\n", r); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (!ath_complete_reset(sc, true)) | 
|  | r = -EIO; | 
|  |  | 
|  | out: | 
|  | spin_unlock_bh(&sc->sc_pcu_lock); | 
|  | return r; | 
|  | } | 
|  |  | 
|  |  | 
|  | /* | 
|  | * Set/change channels.  If the channel is really being changed, it's done | 
|  | * by reseting the chip.  To accomplish this we must first cleanup any pending | 
|  | * DMA, then restart stuff. | 
|  | */ | 
|  | static int ath_set_channel(struct ath_softc *sc, struct ieee80211_hw *hw, | 
|  | struct ath9k_channel *hchan) | 
|  | { | 
|  | int r; | 
|  |  | 
|  | if (sc->sc_flags & SC_OP_INVALID) | 
|  | return -EIO; | 
|  |  | 
|  | ath9k_ps_wakeup(sc); | 
|  |  | 
|  | r = ath_reset_internal(sc, hchan, false); | 
|  |  | 
|  | ath9k_ps_restore(sc); | 
|  |  | 
|  | return r; | 
|  | } | 
|  |  | 
|  | static void ath_paprd_activate(struct ath_softc *sc) | 
|  | { | 
|  | struct ath_hw *ah = sc->sc_ah; | 
|  | struct ath9k_hw_cal_data *caldata = ah->caldata; | 
|  | int chain; | 
|  |  | 
|  | if (!caldata || !caldata->paprd_done) | 
|  | return; | 
|  |  | 
|  | ath9k_ps_wakeup(sc); | 
|  | ar9003_paprd_enable(ah, false); | 
|  | for (chain = 0; chain < AR9300_MAX_CHAINS; chain++) { | 
|  | if (!(ah->txchainmask & BIT(chain))) | 
|  | continue; | 
|  |  | 
|  | ar9003_paprd_populate_single_table(ah, caldata, chain); | 
|  | } | 
|  |  | 
|  | ar9003_paprd_enable(ah, true); | 
|  | ath9k_ps_restore(sc); | 
|  | } | 
|  |  | 
|  | static bool ath_paprd_send_frame(struct ath_softc *sc, struct sk_buff *skb, int chain) | 
|  | { | 
|  | struct ieee80211_hw *hw = sc->hw; | 
|  | struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb); | 
|  | struct ath_hw *ah = sc->sc_ah; | 
|  | struct ath_common *common = ath9k_hw_common(ah); | 
|  | struct ath_tx_control txctl; | 
|  | int time_left; | 
|  |  | 
|  | memset(&txctl, 0, sizeof(txctl)); | 
|  | txctl.txq = sc->tx.txq_map[WME_AC_BE]; | 
|  |  | 
|  | memset(tx_info, 0, sizeof(*tx_info)); | 
|  | tx_info->band = hw->conf.channel->band; | 
|  | tx_info->flags |= IEEE80211_TX_CTL_NO_ACK; | 
|  | tx_info->control.rates[0].idx = 0; | 
|  | tx_info->control.rates[0].count = 1; | 
|  | tx_info->control.rates[0].flags = IEEE80211_TX_RC_MCS; | 
|  | tx_info->control.rates[1].idx = -1; | 
|  |  | 
|  | init_completion(&sc->paprd_complete); | 
|  | txctl.paprd = BIT(chain); | 
|  |  | 
|  | if (ath_tx_start(hw, skb, &txctl) != 0) { | 
|  | ath_dbg(common, CALIBRATE, "PAPRD TX failed\n"); | 
|  | dev_kfree_skb_any(skb); | 
|  | return false; | 
|  | } | 
|  |  | 
|  | time_left = wait_for_completion_timeout(&sc->paprd_complete, | 
|  | msecs_to_jiffies(ATH_PAPRD_TIMEOUT)); | 
|  |  | 
|  | if (!time_left) | 
|  | ath_dbg(common, CALIBRATE, | 
|  | "Timeout waiting for paprd training on TX chain %d\n", | 
|  | chain); | 
|  |  | 
|  | return !!time_left; | 
|  | } | 
|  |  | 
|  | void ath_paprd_calibrate(struct work_struct *work) | 
|  | { | 
|  | struct ath_softc *sc = container_of(work, struct ath_softc, paprd_work); | 
|  | struct ieee80211_hw *hw = sc->hw; | 
|  | struct ath_hw *ah = sc->sc_ah; | 
|  | struct ieee80211_hdr *hdr; | 
|  | struct sk_buff *skb = NULL; | 
|  | struct ath9k_hw_cal_data *caldata = ah->caldata; | 
|  | struct ath_common *common = ath9k_hw_common(ah); | 
|  | int ftype; | 
|  | int chain_ok = 0; | 
|  | int chain; | 
|  | int len = 1800; | 
|  |  | 
|  | if (!caldata) | 
|  | return; | 
|  |  | 
|  | ath9k_ps_wakeup(sc); | 
|  |  | 
|  | if (ar9003_paprd_init_table(ah) < 0) | 
|  | goto fail_paprd; | 
|  |  | 
|  | skb = alloc_skb(len, GFP_KERNEL); | 
|  | if (!skb) | 
|  | goto fail_paprd; | 
|  |  | 
|  | skb_put(skb, len); | 
|  | memset(skb->data, 0, len); | 
|  | hdr = (struct ieee80211_hdr *)skb->data; | 
|  | ftype = IEEE80211_FTYPE_DATA | IEEE80211_STYPE_NULLFUNC; | 
|  | hdr->frame_control = cpu_to_le16(ftype); | 
|  | hdr->duration_id = cpu_to_le16(10); | 
|  | memcpy(hdr->addr1, hw->wiphy->perm_addr, ETH_ALEN); | 
|  | memcpy(hdr->addr2, hw->wiphy->perm_addr, ETH_ALEN); | 
|  | memcpy(hdr->addr3, hw->wiphy->perm_addr, ETH_ALEN); | 
|  |  | 
|  | for (chain = 0; chain < AR9300_MAX_CHAINS; chain++) { | 
|  | if (!(ah->txchainmask & BIT(chain))) | 
|  | continue; | 
|  |  | 
|  | chain_ok = 0; | 
|  |  | 
|  | ath_dbg(common, CALIBRATE, | 
|  | "Sending PAPRD frame for thermal measurement on chain %d\n", | 
|  | chain); | 
|  | if (!ath_paprd_send_frame(sc, skb, chain)) | 
|  | goto fail_paprd; | 
|  |  | 
|  | ar9003_paprd_setup_gain_table(ah, chain); | 
|  |  | 
|  | ath_dbg(common, CALIBRATE, | 
|  | "Sending PAPRD training frame on chain %d\n", chain); | 
|  | if (!ath_paprd_send_frame(sc, skb, chain)) | 
|  | goto fail_paprd; | 
|  |  | 
|  | if (!ar9003_paprd_is_done(ah)) { | 
|  | ath_dbg(common, CALIBRATE, | 
|  | "PAPRD not yet done on chain %d\n", chain); | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (ar9003_paprd_create_curve(ah, caldata, chain)) { | 
|  | ath_dbg(common, CALIBRATE, | 
|  | "PAPRD create curve failed on chain %d\n", | 
|  | chain); | 
|  | break; | 
|  | } | 
|  |  | 
|  | chain_ok = 1; | 
|  | } | 
|  | kfree_skb(skb); | 
|  |  | 
|  | if (chain_ok) { | 
|  | caldata->paprd_done = true; | 
|  | ath_paprd_activate(sc); | 
|  | } | 
|  |  | 
|  | fail_paprd: | 
|  | ath9k_ps_restore(sc); | 
|  | } | 
|  |  | 
|  | /* | 
|  | *  This routine performs the periodic noise floor calibration function | 
|  | *  that is used to adjust and optimize the chip performance.  This | 
|  | *  takes environmental changes (location, temperature) into account. | 
|  | *  When the task is complete, it reschedules itself depending on the | 
|  | *  appropriate interval that was calculated. | 
|  | */ | 
|  | void ath_ani_calibrate(unsigned long data) | 
|  | { | 
|  | struct ath_softc *sc = (struct ath_softc *)data; | 
|  | struct ath_hw *ah = sc->sc_ah; | 
|  | struct ath_common *common = ath9k_hw_common(ah); | 
|  | bool longcal = false; | 
|  | bool shortcal = false; | 
|  | bool aniflag = false; | 
|  | unsigned int timestamp = jiffies_to_msecs(jiffies); | 
|  | u32 cal_interval, short_cal_interval, long_cal_interval; | 
|  | unsigned long flags; | 
|  |  | 
|  | if (ah->caldata && ah->caldata->nfcal_interference) | 
|  | long_cal_interval = ATH_LONG_CALINTERVAL_INT; | 
|  | else | 
|  | long_cal_interval = ATH_LONG_CALINTERVAL; | 
|  |  | 
|  | short_cal_interval = (ah->opmode == NL80211_IFTYPE_AP) ? | 
|  | ATH_AP_SHORT_CALINTERVAL : ATH_STA_SHORT_CALINTERVAL; | 
|  |  | 
|  | /* Only calibrate if awake */ | 
|  | if (sc->sc_ah->power_mode != ATH9K_PM_AWAKE) | 
|  | goto set_timer; | 
|  |  | 
|  | ath9k_ps_wakeup(sc); | 
|  |  | 
|  | /* Long calibration runs independently of short calibration. */ | 
|  | if ((timestamp - common->ani.longcal_timer) >= long_cal_interval) { | 
|  | longcal = true; | 
|  | common->ani.longcal_timer = timestamp; | 
|  | } | 
|  |  | 
|  | /* Short calibration applies only while caldone is false */ | 
|  | if (!common->ani.caldone) { | 
|  | if ((timestamp - common->ani.shortcal_timer) >= short_cal_interval) { | 
|  | shortcal = true; | 
|  | common->ani.shortcal_timer = timestamp; | 
|  | common->ani.resetcal_timer = timestamp; | 
|  | } | 
|  | } else { | 
|  | if ((timestamp - common->ani.resetcal_timer) >= | 
|  | ATH_RESTART_CALINTERVAL) { | 
|  | common->ani.caldone = ath9k_hw_reset_calvalid(ah); | 
|  | if (common->ani.caldone) | 
|  | common->ani.resetcal_timer = timestamp; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Verify whether we must check ANI */ | 
|  | if (sc->sc_ah->config.enable_ani | 
|  | && (timestamp - common->ani.checkani_timer) >= | 
|  | ah->config.ani_poll_interval) { | 
|  | aniflag = true; | 
|  | common->ani.checkani_timer = timestamp; | 
|  | } | 
|  |  | 
|  | /* Call ANI routine if necessary */ | 
|  | if (aniflag) { | 
|  | spin_lock_irqsave(&common->cc_lock, flags); | 
|  | ath9k_hw_ani_monitor(ah, ah->curchan); | 
|  | ath_update_survey_stats(sc); | 
|  | spin_unlock_irqrestore(&common->cc_lock, flags); | 
|  | } | 
|  |  | 
|  | /* Perform calibration if necessary */ | 
|  | if (longcal || shortcal) { | 
|  | common->ani.caldone = | 
|  | ath9k_hw_calibrate(ah, ah->curchan, | 
|  | ah->rxchainmask, longcal); | 
|  | } | 
|  |  | 
|  | ath_dbg(common, ANI, | 
|  | "Calibration @%lu finished: %s %s %s, caldone: %s\n", | 
|  | jiffies, | 
|  | longcal ? "long" : "", shortcal ? "short" : "", | 
|  | aniflag ? "ani" : "", common->ani.caldone ? "true" : "false"); | 
|  |  | 
|  | ath9k_ps_restore(sc); | 
|  |  | 
|  | set_timer: | 
|  | /* | 
|  | * Set timer interval based on previous results. | 
|  | * The interval must be the shortest necessary to satisfy ANI, | 
|  | * short calibration and long calibration. | 
|  | */ | 
|  | ath9k_debug_samp_bb_mac(sc); | 
|  | cal_interval = ATH_LONG_CALINTERVAL; | 
|  | if (sc->sc_ah->config.enable_ani) | 
|  | cal_interval = min(cal_interval, | 
|  | (u32)ah->config.ani_poll_interval); | 
|  | if (!common->ani.caldone) | 
|  | cal_interval = min(cal_interval, (u32)short_cal_interval); | 
|  |  | 
|  | mod_timer(&common->ani.timer, jiffies + msecs_to_jiffies(cal_interval)); | 
|  | if ((sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_PAPRD) && ah->caldata) { | 
|  | if (!ah->caldata->paprd_done) | 
|  | ieee80211_queue_work(sc->hw, &sc->paprd_work); | 
|  | else if (!ah->paprd_table_write_done) | 
|  | ath_paprd_activate(sc); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void ath_node_attach(struct ath_softc *sc, struct ieee80211_sta *sta, | 
|  | struct ieee80211_vif *vif) | 
|  | { | 
|  | struct ath_node *an; | 
|  | an = (struct ath_node *)sta->drv_priv; | 
|  |  | 
|  | #ifdef CONFIG_ATH9K_DEBUGFS | 
|  | spin_lock(&sc->nodes_lock); | 
|  | list_add(&an->list, &sc->nodes); | 
|  | spin_unlock(&sc->nodes_lock); | 
|  | #endif | 
|  | an->sta = sta; | 
|  | an->vif = vif; | 
|  | if (sc->sc_flags & SC_OP_TXAGGR) { | 
|  | ath_tx_node_init(sc, an); | 
|  | an->maxampdu = 1 << (IEEE80211_HT_MAX_AMPDU_FACTOR + | 
|  | sta->ht_cap.ampdu_factor); | 
|  | an->mpdudensity = parse_mpdudensity(sta->ht_cap.ampdu_density); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void ath_node_detach(struct ath_softc *sc, struct ieee80211_sta *sta) | 
|  | { | 
|  | struct ath_node *an = (struct ath_node *)sta->drv_priv; | 
|  |  | 
|  | #ifdef CONFIG_ATH9K_DEBUGFS | 
|  | spin_lock(&sc->nodes_lock); | 
|  | list_del(&an->list); | 
|  | spin_unlock(&sc->nodes_lock); | 
|  | an->sta = NULL; | 
|  | #endif | 
|  |  | 
|  | if (sc->sc_flags & SC_OP_TXAGGR) | 
|  | ath_tx_node_cleanup(sc, an); | 
|  | } | 
|  |  | 
|  |  | 
|  | void ath9k_tasklet(unsigned long data) | 
|  | { | 
|  | struct ath_softc *sc = (struct ath_softc *)data; | 
|  | struct ath_hw *ah = sc->sc_ah; | 
|  | struct ath_common *common = ath9k_hw_common(ah); | 
|  |  | 
|  | u32 status = sc->intrstatus; | 
|  | u32 rxmask; | 
|  |  | 
|  | ath9k_ps_wakeup(sc); | 
|  | spin_lock(&sc->sc_pcu_lock); | 
|  |  | 
|  | if ((status & ATH9K_INT_FATAL) || | 
|  | (status & ATH9K_INT_BB_WATCHDOG)) { | 
|  | #ifdef CONFIG_ATH9K_DEBUGFS | 
|  | enum ath_reset_type type; | 
|  |  | 
|  | if (status & ATH9K_INT_FATAL) | 
|  | type = RESET_TYPE_FATAL_INT; | 
|  | else | 
|  | type = RESET_TYPE_BB_WATCHDOG; | 
|  |  | 
|  | RESET_STAT_INC(sc, type); | 
|  | #endif | 
|  | ieee80211_queue_work(sc->hw, &sc->hw_reset_work); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Only run the baseband hang check if beacons stop working in AP or | 
|  | * IBSS mode, because it has a high false positive rate. For station | 
|  | * mode it should not be necessary, since the upper layers will detect | 
|  | * this through a beacon miss automatically and the following channel | 
|  | * change will trigger a hardware reset anyway | 
|  | */ | 
|  | if (ath9k_hw_numtxpending(ah, sc->beacon.beaconq) != 0 && | 
|  | !ath9k_hw_check_alive(ah)) | 
|  | ieee80211_queue_work(sc->hw, &sc->hw_check_work); | 
|  |  | 
|  | if ((status & ATH9K_INT_TSFOOR) && sc->ps_enabled) { | 
|  | /* | 
|  | * TSF sync does not look correct; remain awake to sync with | 
|  | * the next Beacon. | 
|  | */ | 
|  | ath_dbg(common, PS, "TSFOOR - Sync with next Beacon\n"); | 
|  | sc->ps_flags |= PS_WAIT_FOR_BEACON | PS_BEACON_SYNC; | 
|  | } | 
|  |  | 
|  | if (ah->caps.hw_caps & ATH9K_HW_CAP_EDMA) | 
|  | rxmask = (ATH9K_INT_RXHP | ATH9K_INT_RXLP | ATH9K_INT_RXEOL | | 
|  | ATH9K_INT_RXORN); | 
|  | else | 
|  | rxmask = (ATH9K_INT_RX | ATH9K_INT_RXEOL | ATH9K_INT_RXORN); | 
|  |  | 
|  | if (status & rxmask) { | 
|  | /* Check for high priority Rx first */ | 
|  | if ((ah->caps.hw_caps & ATH9K_HW_CAP_EDMA) && | 
|  | (status & ATH9K_INT_RXHP)) | 
|  | ath_rx_tasklet(sc, 0, true); | 
|  |  | 
|  | ath_rx_tasklet(sc, 0, false); | 
|  | } | 
|  |  | 
|  | if (status & ATH9K_INT_TX) { | 
|  | if (ah->caps.hw_caps & ATH9K_HW_CAP_EDMA) | 
|  | ath_tx_edma_tasklet(sc); | 
|  | else | 
|  | ath_tx_tasklet(sc); | 
|  | } | 
|  |  | 
|  | if (ath9k_hw_get_btcoex_scheme(ah) == ATH_BTCOEX_CFG_3WIRE) | 
|  | if (status & ATH9K_INT_GENTIMER) | 
|  | ath_gen_timer_isr(sc->sc_ah); | 
|  |  | 
|  | if ((status & ATH9K_INT_MCI) && ATH9K_HW_CAP_MCI) | 
|  | ath_mci_intr(sc); | 
|  |  | 
|  | out: | 
|  | /* re-enable hardware interrupt */ | 
|  | ath9k_hw_enable_interrupts(ah); | 
|  |  | 
|  | spin_unlock(&sc->sc_pcu_lock); | 
|  | ath9k_ps_restore(sc); | 
|  | } | 
|  |  | 
|  | irqreturn_t ath_isr(int irq, void *dev) | 
|  | { | 
|  | #define SCHED_INTR (				\ | 
|  | ATH9K_INT_FATAL |		\ | 
|  | ATH9K_INT_BB_WATCHDOG |		\ | 
|  | ATH9K_INT_RXORN |		\ | 
|  | ATH9K_INT_RXEOL |		\ | 
|  | ATH9K_INT_RX |			\ | 
|  | ATH9K_INT_RXLP |		\ | 
|  | ATH9K_INT_RXHP |		\ | 
|  | ATH9K_INT_TX |			\ | 
|  | ATH9K_INT_BMISS |		\ | 
|  | ATH9K_INT_CST |			\ | 
|  | ATH9K_INT_TSFOOR |		\ | 
|  | ATH9K_INT_GENTIMER |		\ | 
|  | ATH9K_INT_MCI) | 
|  |  | 
|  | struct ath_softc *sc = dev; | 
|  | struct ath_hw *ah = sc->sc_ah; | 
|  | struct ath_common *common = ath9k_hw_common(ah); | 
|  | enum ath9k_int status; | 
|  | bool sched = false; | 
|  |  | 
|  | /* | 
|  | * The hardware is not ready/present, don't | 
|  | * touch anything. Note this can happen early | 
|  | * on if the IRQ is shared. | 
|  | */ | 
|  | if (sc->sc_flags & SC_OP_INVALID) | 
|  | return IRQ_NONE; | 
|  |  | 
|  |  | 
|  | /* shared irq, not for us */ | 
|  |  | 
|  | if (!ath9k_hw_intrpend(ah)) | 
|  | return IRQ_NONE; | 
|  |  | 
|  | /* | 
|  | * Figure out the reason(s) for the interrupt.  Note | 
|  | * that the hal returns a pseudo-ISR that may include | 
|  | * bits we haven't explicitly enabled so we mask the | 
|  | * value to insure we only process bits we requested. | 
|  | */ | 
|  | ath9k_hw_getisr(ah, &status);	/* NB: clears ISR too */ | 
|  | status &= ah->imask;	/* discard unasked-for bits */ | 
|  |  | 
|  | /* | 
|  | * If there are no status bits set, then this interrupt was not | 
|  | * for me (should have been caught above). | 
|  | */ | 
|  | if (!status) | 
|  | return IRQ_NONE; | 
|  |  | 
|  | /* Cache the status */ | 
|  | sc->intrstatus = status; | 
|  |  | 
|  | if (status & SCHED_INTR) | 
|  | sched = true; | 
|  |  | 
|  | /* | 
|  | * If a FATAL or RXORN interrupt is received, we have to reset the | 
|  | * chip immediately. | 
|  | */ | 
|  | if ((status & ATH9K_INT_FATAL) || ((status & ATH9K_INT_RXORN) && | 
|  | !(ah->caps.hw_caps & ATH9K_HW_CAP_EDMA))) | 
|  | goto chip_reset; | 
|  |  | 
|  | if ((ah->caps.hw_caps & ATH9K_HW_CAP_EDMA) && | 
|  | (status & ATH9K_INT_BB_WATCHDOG)) { | 
|  |  | 
|  | spin_lock(&common->cc_lock); | 
|  | ath_hw_cycle_counters_update(common); | 
|  | ar9003_hw_bb_watchdog_dbg_info(ah); | 
|  | spin_unlock(&common->cc_lock); | 
|  |  | 
|  | goto chip_reset; | 
|  | } | 
|  |  | 
|  | if (status & ATH9K_INT_SWBA) | 
|  | tasklet_schedule(&sc->bcon_tasklet); | 
|  |  | 
|  | if (status & ATH9K_INT_TXURN) | 
|  | ath9k_hw_updatetxtriglevel(ah, true); | 
|  |  | 
|  | if (status & ATH9K_INT_RXEOL) { | 
|  | ah->imask &= ~(ATH9K_INT_RXEOL | ATH9K_INT_RXORN); | 
|  | ath9k_hw_set_interrupts(ah); | 
|  | } | 
|  |  | 
|  | if (status & ATH9K_INT_MIB) { | 
|  | /* | 
|  | * Disable interrupts until we service the MIB | 
|  | * interrupt; otherwise it will continue to | 
|  | * fire. | 
|  | */ | 
|  | ath9k_hw_disable_interrupts(ah); | 
|  | /* | 
|  | * Let the hal handle the event. We assume | 
|  | * it will clear whatever condition caused | 
|  | * the interrupt. | 
|  | */ | 
|  | spin_lock(&common->cc_lock); | 
|  | ath9k_hw_proc_mib_event(ah); | 
|  | spin_unlock(&common->cc_lock); | 
|  | ath9k_hw_enable_interrupts(ah); | 
|  | } | 
|  |  | 
|  | if (!(ah->caps.hw_caps & ATH9K_HW_CAP_AUTOSLEEP)) | 
|  | if (status & ATH9K_INT_TIM_TIMER) { | 
|  | if (ATH_DBG_WARN_ON_ONCE(sc->ps_idle)) | 
|  | goto chip_reset; | 
|  | /* Clear RxAbort bit so that we can | 
|  | * receive frames */ | 
|  | ath9k_setpower(sc, ATH9K_PM_AWAKE); | 
|  | ath9k_hw_setrxabort(sc->sc_ah, 0); | 
|  | sc->ps_flags |= PS_WAIT_FOR_BEACON; | 
|  | } | 
|  |  | 
|  | chip_reset: | 
|  |  | 
|  | ath_debug_stat_interrupt(sc, status); | 
|  |  | 
|  | if (sched) { | 
|  | /* turn off every interrupt */ | 
|  | ath9k_hw_disable_interrupts(ah); | 
|  | tasklet_schedule(&sc->intr_tq); | 
|  | } | 
|  |  | 
|  | return IRQ_HANDLED; | 
|  |  | 
|  | #undef SCHED_INTR | 
|  | } | 
|  |  | 
|  | static int ath_reset(struct ath_softc *sc, bool retry_tx) | 
|  | { | 
|  | int r; | 
|  |  | 
|  | ath9k_ps_wakeup(sc); | 
|  |  | 
|  | r = ath_reset_internal(sc, NULL, retry_tx); | 
|  |  | 
|  | if (retry_tx) { | 
|  | int i; | 
|  | for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++) { | 
|  | if (ATH_TXQ_SETUP(sc, i)) { | 
|  | spin_lock_bh(&sc->tx.txq[i].axq_lock); | 
|  | ath_txq_schedule(sc, &sc->tx.txq[i]); | 
|  | spin_unlock_bh(&sc->tx.txq[i].axq_lock); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | ath9k_ps_restore(sc); | 
|  |  | 
|  | return r; | 
|  | } | 
|  |  | 
|  | void ath_reset_work(struct work_struct *work) | 
|  | { | 
|  | struct ath_softc *sc = container_of(work, struct ath_softc, hw_reset_work); | 
|  |  | 
|  | ath_reset(sc, true); | 
|  | } | 
|  |  | 
|  | void ath_hw_check(struct work_struct *work) | 
|  | { | 
|  | struct ath_softc *sc = container_of(work, struct ath_softc, hw_check_work); | 
|  | struct ath_common *common = ath9k_hw_common(sc->sc_ah); | 
|  | unsigned long flags; | 
|  | int busy; | 
|  |  | 
|  | ath9k_ps_wakeup(sc); | 
|  | if (ath9k_hw_check_alive(sc->sc_ah)) | 
|  | goto out; | 
|  |  | 
|  | spin_lock_irqsave(&common->cc_lock, flags); | 
|  | busy = ath_update_survey_stats(sc); | 
|  | spin_unlock_irqrestore(&common->cc_lock, flags); | 
|  |  | 
|  | ath_dbg(common, RESET, "Possible baseband hang, busy=%d (try %d)\n", | 
|  | busy, sc->hw_busy_count + 1); | 
|  | if (busy >= 99) { | 
|  | if (++sc->hw_busy_count >= 3) { | 
|  | RESET_STAT_INC(sc, RESET_TYPE_BB_HANG); | 
|  | ieee80211_queue_work(sc->hw, &sc->hw_reset_work); | 
|  | } | 
|  |  | 
|  | } else if (busy >= 0) | 
|  | sc->hw_busy_count = 0; | 
|  |  | 
|  | out: | 
|  | ath9k_ps_restore(sc); | 
|  | } | 
|  |  | 
|  | static void ath_hw_pll_rx_hang_check(struct ath_softc *sc, u32 pll_sqsum) | 
|  | { | 
|  | static int count; | 
|  | struct ath_common *common = ath9k_hw_common(sc->sc_ah); | 
|  |  | 
|  | if (pll_sqsum >= 0x40000) { | 
|  | count++; | 
|  | if (count == 3) { | 
|  | /* Rx is hung for more than 500ms. Reset it */ | 
|  | ath_dbg(common, RESET, "Possible RX hang, resetting\n"); | 
|  | RESET_STAT_INC(sc, RESET_TYPE_PLL_HANG); | 
|  | ieee80211_queue_work(sc->hw, &sc->hw_reset_work); | 
|  | count = 0; | 
|  | } | 
|  | } else | 
|  | count = 0; | 
|  | } | 
|  |  | 
|  | void ath_hw_pll_work(struct work_struct *work) | 
|  | { | 
|  | struct ath_softc *sc = container_of(work, struct ath_softc, | 
|  | hw_pll_work.work); | 
|  | u32 pll_sqsum; | 
|  |  | 
|  | if (AR_SREV_9485(sc->sc_ah)) { | 
|  |  | 
|  | ath9k_ps_wakeup(sc); | 
|  | pll_sqsum = ar9003_get_pll_sqsum_dvc(sc->sc_ah); | 
|  | ath9k_ps_restore(sc); | 
|  |  | 
|  | ath_hw_pll_rx_hang_check(sc, pll_sqsum); | 
|  |  | 
|  | ieee80211_queue_delayed_work(sc->hw, &sc->hw_pll_work, HZ/5); | 
|  | } | 
|  | } | 
|  |  | 
|  | /**********************/ | 
|  | /* mac80211 callbacks */ | 
|  | /**********************/ | 
|  |  | 
|  | static int ath9k_start(struct ieee80211_hw *hw) | 
|  | { | 
|  | struct ath_softc *sc = hw->priv; | 
|  | struct ath_hw *ah = sc->sc_ah; | 
|  | struct ath_common *common = ath9k_hw_common(ah); | 
|  | struct ieee80211_channel *curchan = hw->conf.channel; | 
|  | struct ath9k_channel *init_channel; | 
|  | int r; | 
|  |  | 
|  | ath_dbg(common, CONFIG, | 
|  | "Starting driver with initial channel: %d MHz\n", | 
|  | curchan->center_freq); | 
|  |  | 
|  | ath9k_ps_wakeup(sc); | 
|  |  | 
|  | mutex_lock(&sc->mutex); | 
|  |  | 
|  | /* setup initial channel */ | 
|  | sc->chan_idx = curchan->hw_value; | 
|  |  | 
|  | init_channel = ath9k_cmn_get_curchannel(hw, ah); | 
|  |  | 
|  | /* Reset SERDES registers */ | 
|  | ath9k_hw_configpcipowersave(ah, false); | 
|  |  | 
|  | /* | 
|  | * The basic interface to setting the hardware in a good | 
|  | * state is ``reset''.  On return the hardware is known to | 
|  | * be powered up and with interrupts disabled.  This must | 
|  | * be followed by initialization of the appropriate bits | 
|  | * and then setup of the interrupt mask. | 
|  | */ | 
|  | spin_lock_bh(&sc->sc_pcu_lock); | 
|  |  | 
|  | atomic_set(&ah->intr_ref_cnt, -1); | 
|  |  | 
|  | r = ath9k_hw_reset(ah, init_channel, ah->caldata, false); | 
|  | if (r) { | 
|  | ath_err(common, | 
|  | "Unable to reset hardware; reset status %d (freq %u MHz)\n", | 
|  | r, curchan->center_freq); | 
|  | spin_unlock_bh(&sc->sc_pcu_lock); | 
|  | goto mutex_unlock; | 
|  | } | 
|  |  | 
|  | /* Setup our intr mask. */ | 
|  | ah->imask = ATH9K_INT_TX | ATH9K_INT_RXEOL | | 
|  | ATH9K_INT_RXORN | ATH9K_INT_FATAL | | 
|  | ATH9K_INT_GLOBAL; | 
|  |  | 
|  | if (ah->caps.hw_caps & ATH9K_HW_CAP_EDMA) | 
|  | ah->imask |= ATH9K_INT_RXHP | | 
|  | ATH9K_INT_RXLP | | 
|  | ATH9K_INT_BB_WATCHDOG; | 
|  | else | 
|  | ah->imask |= ATH9K_INT_RX; | 
|  |  | 
|  | ah->imask |= ATH9K_INT_GTT; | 
|  |  | 
|  | if (ah->caps.hw_caps & ATH9K_HW_CAP_HT) | 
|  | ah->imask |= ATH9K_INT_CST; | 
|  |  | 
|  | if (ah->caps.hw_caps & ATH9K_HW_CAP_MCI) | 
|  | ah->imask |= ATH9K_INT_MCI; | 
|  |  | 
|  | sc->sc_flags &= ~SC_OP_INVALID; | 
|  | sc->sc_ah->is_monitoring = false; | 
|  |  | 
|  | /* Disable BMISS interrupt when we're not associated */ | 
|  | ah->imask &= ~(ATH9K_INT_SWBA | ATH9K_INT_BMISS); | 
|  |  | 
|  | if (!ath_complete_reset(sc, false)) { | 
|  | r = -EIO; | 
|  | spin_unlock_bh(&sc->sc_pcu_lock); | 
|  | goto mutex_unlock; | 
|  | } | 
|  |  | 
|  | if (ah->led_pin >= 0) { | 
|  | ath9k_hw_cfg_output(ah, ah->led_pin, | 
|  | AR_GPIO_OUTPUT_MUX_AS_OUTPUT); | 
|  | ath9k_hw_set_gpio(ah, ah->led_pin, 0); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Reset key cache to sane defaults (all entries cleared) instead of | 
|  | * semi-random values after suspend/resume. | 
|  | */ | 
|  | ath9k_cmn_init_crypto(sc->sc_ah); | 
|  |  | 
|  | spin_unlock_bh(&sc->sc_pcu_lock); | 
|  |  | 
|  | if ((ath9k_hw_get_btcoex_scheme(ah) != ATH_BTCOEX_CFG_NONE) && | 
|  | !ah->btcoex_hw.enabled) { | 
|  | if (!(sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_MCI)) | 
|  | ath9k_hw_btcoex_set_weight(ah, AR_BT_COEX_WGHT, | 
|  | AR_STOMP_LOW_WLAN_WGHT); | 
|  | ath9k_hw_btcoex_enable(ah); | 
|  |  | 
|  | if (ath9k_hw_get_btcoex_scheme(ah) == ATH_BTCOEX_CFG_3WIRE) | 
|  | ath9k_btcoex_timer_resume(sc); | 
|  | } | 
|  |  | 
|  | if (ah->caps.pcie_lcr_extsync_en && common->bus_ops->extn_synch_en) | 
|  | common->bus_ops->extn_synch_en(common); | 
|  |  | 
|  | mutex_unlock: | 
|  | mutex_unlock(&sc->mutex); | 
|  |  | 
|  | ath9k_ps_restore(sc); | 
|  |  | 
|  | return r; | 
|  | } | 
|  |  | 
|  | static void ath9k_tx(struct ieee80211_hw *hw, struct sk_buff *skb) | 
|  | { | 
|  | struct ath_softc *sc = hw->priv; | 
|  | struct ath_common *common = ath9k_hw_common(sc->sc_ah); | 
|  | struct ath_tx_control txctl; | 
|  | struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; | 
|  |  | 
|  | if (sc->ps_enabled) { | 
|  | /* | 
|  | * mac80211 does not set PM field for normal data frames, so we | 
|  | * need to update that based on the current PS mode. | 
|  | */ | 
|  | if (ieee80211_is_data(hdr->frame_control) && | 
|  | !ieee80211_is_nullfunc(hdr->frame_control) && | 
|  | !ieee80211_has_pm(hdr->frame_control)) { | 
|  | ath_dbg(common, PS, | 
|  | "Add PM=1 for a TX frame while in PS mode\n"); | 
|  | hdr->frame_control |= cpu_to_le16(IEEE80211_FCTL_PM); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Cannot tx while the hardware is in full sleep, it first needs a full | 
|  | * chip reset to recover from that | 
|  | */ | 
|  | if (unlikely(sc->sc_ah->power_mode == ATH9K_PM_FULL_SLEEP)) | 
|  | goto exit; | 
|  |  | 
|  | if (unlikely(sc->sc_ah->power_mode != ATH9K_PM_AWAKE)) { | 
|  | /* | 
|  | * We are using PS-Poll and mac80211 can request TX while in | 
|  | * power save mode. Need to wake up hardware for the TX to be | 
|  | * completed and if needed, also for RX of buffered frames. | 
|  | */ | 
|  | ath9k_ps_wakeup(sc); | 
|  | if (!(sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_AUTOSLEEP)) | 
|  | ath9k_hw_setrxabort(sc->sc_ah, 0); | 
|  | if (ieee80211_is_pspoll(hdr->frame_control)) { | 
|  | ath_dbg(common, PS, | 
|  | "Sending PS-Poll to pick a buffered frame\n"); | 
|  | sc->ps_flags |= PS_WAIT_FOR_PSPOLL_DATA; | 
|  | } else { | 
|  | ath_dbg(common, PS, "Wake up to complete TX\n"); | 
|  | sc->ps_flags |= PS_WAIT_FOR_TX_ACK; | 
|  | } | 
|  | /* | 
|  | * The actual restore operation will happen only after | 
|  | * the sc_flags bit is cleared. We are just dropping | 
|  | * the ps_usecount here. | 
|  | */ | 
|  | ath9k_ps_restore(sc); | 
|  | } | 
|  |  | 
|  | memset(&txctl, 0, sizeof(struct ath_tx_control)); | 
|  | txctl.txq = sc->tx.txq_map[skb_get_queue_mapping(skb)]; | 
|  |  | 
|  | ath_dbg(common, XMIT, "transmitting packet, skb: %p\n", skb); | 
|  |  | 
|  | if (ath_tx_start(hw, skb, &txctl) != 0) { | 
|  | ath_dbg(common, XMIT, "TX failed\n"); | 
|  | goto exit; | 
|  | } | 
|  |  | 
|  | return; | 
|  | exit: | 
|  | dev_kfree_skb_any(skb); | 
|  | } | 
|  |  | 
|  | static void ath9k_stop(struct ieee80211_hw *hw) | 
|  | { | 
|  | struct ath_softc *sc = hw->priv; | 
|  | struct ath_hw *ah = sc->sc_ah; | 
|  | struct ath_common *common = ath9k_hw_common(ah); | 
|  | bool prev_idle; | 
|  |  | 
|  | mutex_lock(&sc->mutex); | 
|  |  | 
|  | ath_cancel_work(sc); | 
|  |  | 
|  | if (sc->sc_flags & SC_OP_INVALID) { | 
|  | ath_dbg(common, ANY, "Device not present\n"); | 
|  | mutex_unlock(&sc->mutex); | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* Ensure HW is awake when we try to shut it down. */ | 
|  | ath9k_ps_wakeup(sc); | 
|  |  | 
|  | if (ah->btcoex_hw.enabled && | 
|  | ath9k_hw_get_btcoex_scheme(ah) != ATH_BTCOEX_CFG_NONE) { | 
|  | ath9k_hw_btcoex_disable(ah); | 
|  | if (ath9k_hw_get_btcoex_scheme(ah) == ATH_BTCOEX_CFG_3WIRE) | 
|  | ath9k_btcoex_timer_pause(sc); | 
|  | ath_mci_flush_profile(&sc->btcoex.mci); | 
|  | } | 
|  |  | 
|  | spin_lock_bh(&sc->sc_pcu_lock); | 
|  |  | 
|  | /* prevent tasklets to enable interrupts once we disable them */ | 
|  | ah->imask &= ~ATH9K_INT_GLOBAL; | 
|  |  | 
|  | /* make sure h/w will not generate any interrupt | 
|  | * before setting the invalid flag. */ | 
|  | ath9k_hw_disable_interrupts(ah); | 
|  |  | 
|  | spin_unlock_bh(&sc->sc_pcu_lock); | 
|  |  | 
|  | /* we can now sync irq and kill any running tasklets, since we already | 
|  | * disabled interrupts and not holding a spin lock */ | 
|  | synchronize_irq(sc->irq); | 
|  | tasklet_kill(&sc->intr_tq); | 
|  | tasklet_kill(&sc->bcon_tasklet); | 
|  |  | 
|  | prev_idle = sc->ps_idle; | 
|  | sc->ps_idle = true; | 
|  |  | 
|  | spin_lock_bh(&sc->sc_pcu_lock); | 
|  |  | 
|  | if (ah->led_pin >= 0) { | 
|  | ath9k_hw_set_gpio(ah, ah->led_pin, 1); | 
|  | ath9k_hw_cfg_gpio_input(ah, ah->led_pin); | 
|  | } | 
|  |  | 
|  | ath_prepare_reset(sc, false, true); | 
|  |  | 
|  | if (sc->rx.frag) { | 
|  | dev_kfree_skb_any(sc->rx.frag); | 
|  | sc->rx.frag = NULL; | 
|  | } | 
|  |  | 
|  | if (!ah->curchan) | 
|  | ah->curchan = ath9k_cmn_get_curchannel(hw, ah); | 
|  |  | 
|  | ath9k_hw_reset(ah, ah->curchan, ah->caldata, false); | 
|  | ath9k_hw_phy_disable(ah); | 
|  |  | 
|  | ath9k_hw_configpcipowersave(ah, true); | 
|  |  | 
|  | spin_unlock_bh(&sc->sc_pcu_lock); | 
|  |  | 
|  | ath9k_ps_restore(sc); | 
|  |  | 
|  | sc->sc_flags |= SC_OP_INVALID; | 
|  | sc->ps_idle = prev_idle; | 
|  |  | 
|  | mutex_unlock(&sc->mutex); | 
|  |  | 
|  | ath_dbg(common, CONFIG, "Driver halt\n"); | 
|  | } | 
|  |  | 
|  | bool ath9k_uses_beacons(int type) | 
|  | { | 
|  | switch (type) { | 
|  | case NL80211_IFTYPE_AP: | 
|  | case NL80211_IFTYPE_ADHOC: | 
|  | case NL80211_IFTYPE_MESH_POINT: | 
|  | return true; | 
|  | default: | 
|  | return false; | 
|  | } | 
|  | } | 
|  |  | 
|  | static void ath9k_reclaim_beacon(struct ath_softc *sc, | 
|  | struct ieee80211_vif *vif) | 
|  | { | 
|  | struct ath_vif *avp = (void *)vif->drv_priv; | 
|  |  | 
|  | ath9k_set_beaconing_status(sc, false); | 
|  | ath_beacon_return(sc, avp); | 
|  | ath9k_set_beaconing_status(sc, true); | 
|  | sc->sc_flags &= ~SC_OP_BEACONS; | 
|  | } | 
|  |  | 
|  | static void ath9k_vif_iter(void *data, u8 *mac, struct ieee80211_vif *vif) | 
|  | { | 
|  | struct ath9k_vif_iter_data *iter_data = data; | 
|  | int i; | 
|  |  | 
|  | if (iter_data->hw_macaddr) | 
|  | for (i = 0; i < ETH_ALEN; i++) | 
|  | iter_data->mask[i] &= | 
|  | ~(iter_data->hw_macaddr[i] ^ mac[i]); | 
|  |  | 
|  | switch (vif->type) { | 
|  | case NL80211_IFTYPE_AP: | 
|  | iter_data->naps++; | 
|  | break; | 
|  | case NL80211_IFTYPE_STATION: | 
|  | iter_data->nstations++; | 
|  | break; | 
|  | case NL80211_IFTYPE_ADHOC: | 
|  | iter_data->nadhocs++; | 
|  | break; | 
|  | case NL80211_IFTYPE_MESH_POINT: | 
|  | iter_data->nmeshes++; | 
|  | break; | 
|  | case NL80211_IFTYPE_WDS: | 
|  | iter_data->nwds++; | 
|  | break; | 
|  | default: | 
|  | iter_data->nothers++; | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Called with sc->mutex held. */ | 
|  | void ath9k_calculate_iter_data(struct ieee80211_hw *hw, | 
|  | struct ieee80211_vif *vif, | 
|  | struct ath9k_vif_iter_data *iter_data) | 
|  | { | 
|  | struct ath_softc *sc = hw->priv; | 
|  | struct ath_hw *ah = sc->sc_ah; | 
|  | struct ath_common *common = ath9k_hw_common(ah); | 
|  |  | 
|  | /* | 
|  | * Use the hardware MAC address as reference, the hardware uses it | 
|  | * together with the BSSID mask when matching addresses. | 
|  | */ | 
|  | memset(iter_data, 0, sizeof(*iter_data)); | 
|  | iter_data->hw_macaddr = common->macaddr; | 
|  | memset(&iter_data->mask, 0xff, ETH_ALEN); | 
|  |  | 
|  | if (vif) | 
|  | ath9k_vif_iter(iter_data, vif->addr, vif); | 
|  |  | 
|  | /* Get list of all active MAC addresses */ | 
|  | ieee80211_iterate_active_interfaces_atomic(sc->hw, ath9k_vif_iter, | 
|  | iter_data); | 
|  | } | 
|  |  | 
|  | /* Called with sc->mutex held. */ | 
|  | static void ath9k_calculate_summary_state(struct ieee80211_hw *hw, | 
|  | struct ieee80211_vif *vif) | 
|  | { | 
|  | struct ath_softc *sc = hw->priv; | 
|  | struct ath_hw *ah = sc->sc_ah; | 
|  | struct ath_common *common = ath9k_hw_common(ah); | 
|  | struct ath9k_vif_iter_data iter_data; | 
|  |  | 
|  | ath9k_calculate_iter_data(hw, vif, &iter_data); | 
|  |  | 
|  | /* Set BSSID mask. */ | 
|  | memcpy(common->bssidmask, iter_data.mask, ETH_ALEN); | 
|  | ath_hw_setbssidmask(common); | 
|  |  | 
|  | /* Set op-mode & TSF */ | 
|  | if (iter_data.naps > 0) { | 
|  | ath9k_hw_set_tsfadjust(ah, 1); | 
|  | sc->sc_flags |= SC_OP_TSF_RESET; | 
|  | ah->opmode = NL80211_IFTYPE_AP; | 
|  | } else { | 
|  | ath9k_hw_set_tsfadjust(ah, 0); | 
|  | sc->sc_flags &= ~SC_OP_TSF_RESET; | 
|  |  | 
|  | if (iter_data.nmeshes) | 
|  | ah->opmode = NL80211_IFTYPE_MESH_POINT; | 
|  | else if (iter_data.nwds) | 
|  | ah->opmode = NL80211_IFTYPE_AP; | 
|  | else if (iter_data.nadhocs) | 
|  | ah->opmode = NL80211_IFTYPE_ADHOC; | 
|  | else | 
|  | ah->opmode = NL80211_IFTYPE_STATION; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Enable MIB interrupts when there are hardware phy counters. | 
|  | */ | 
|  | if ((iter_data.nstations + iter_data.nadhocs + iter_data.nmeshes) > 0) { | 
|  | if (ah->config.enable_ani) | 
|  | ah->imask |= ATH9K_INT_MIB; | 
|  | ah->imask |= ATH9K_INT_TSFOOR; | 
|  | } else { | 
|  | ah->imask &= ~ATH9K_INT_MIB; | 
|  | ah->imask &= ~ATH9K_INT_TSFOOR; | 
|  | } | 
|  |  | 
|  | ath9k_hw_set_interrupts(ah); | 
|  |  | 
|  | /* Set up ANI */ | 
|  | if (iter_data.naps > 0) { | 
|  | sc->sc_ah->stats.avgbrssi = ATH_RSSI_DUMMY_MARKER; | 
|  |  | 
|  | if (!common->disable_ani) { | 
|  | sc->sc_flags |= SC_OP_ANI_RUN; | 
|  | ath_start_ani(common); | 
|  | } | 
|  |  | 
|  | } else { | 
|  | sc->sc_flags &= ~SC_OP_ANI_RUN; | 
|  | del_timer_sync(&common->ani.timer); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Called with sc->mutex held, vif counts set up properly. */ | 
|  | static void ath9k_do_vif_add_setup(struct ieee80211_hw *hw, | 
|  | struct ieee80211_vif *vif) | 
|  | { | 
|  | struct ath_softc *sc = hw->priv; | 
|  |  | 
|  | ath9k_calculate_summary_state(hw, vif); | 
|  |  | 
|  | if (ath9k_uses_beacons(vif->type)) { | 
|  | int error; | 
|  | /* This may fail because upper levels do not have beacons | 
|  | * properly configured yet.  That's OK, we assume it | 
|  | * will be properly configured and then we will be notified | 
|  | * in the info_changed method and set up beacons properly | 
|  | * there. | 
|  | */ | 
|  | ath9k_set_beaconing_status(sc, false); | 
|  | error = ath_beacon_alloc(sc, vif); | 
|  | if (!error) | 
|  | ath_beacon_config(sc, vif); | 
|  | ath9k_set_beaconing_status(sc, true); | 
|  | } | 
|  | } | 
|  |  | 
|  |  | 
|  | static int ath9k_add_interface(struct ieee80211_hw *hw, | 
|  | struct ieee80211_vif *vif) | 
|  | { | 
|  | struct ath_softc *sc = hw->priv; | 
|  | struct ath_hw *ah = sc->sc_ah; | 
|  | struct ath_common *common = ath9k_hw_common(ah); | 
|  | int ret = 0; | 
|  |  | 
|  | ath9k_ps_wakeup(sc); | 
|  | mutex_lock(&sc->mutex); | 
|  |  | 
|  | switch (vif->type) { | 
|  | case NL80211_IFTYPE_STATION: | 
|  | case NL80211_IFTYPE_WDS: | 
|  | case NL80211_IFTYPE_ADHOC: | 
|  | case NL80211_IFTYPE_AP: | 
|  | case NL80211_IFTYPE_MESH_POINT: | 
|  | break; | 
|  | default: | 
|  | ath_err(common, "Interface type %d not yet supported\n", | 
|  | vif->type); | 
|  | ret = -EOPNOTSUPP; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (ath9k_uses_beacons(vif->type)) { | 
|  | if (sc->nbcnvifs >= ATH_BCBUF) { | 
|  | ath_err(common, "Not enough beacon buffers when adding" | 
|  | " new interface of type: %i\n", | 
|  | vif->type); | 
|  | ret = -ENOBUFS; | 
|  | goto out; | 
|  | } | 
|  | } | 
|  |  | 
|  | if ((ah->opmode == NL80211_IFTYPE_ADHOC) || | 
|  | ((vif->type == NL80211_IFTYPE_ADHOC) && | 
|  | sc->nvifs > 0)) { | 
|  | ath_err(common, "Cannot create ADHOC interface when other" | 
|  | " interfaces already exist.\n"); | 
|  | ret = -EINVAL; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | ath_dbg(common, CONFIG, "Attach a VIF of type: %d\n", vif->type); | 
|  |  | 
|  | sc->nvifs++; | 
|  |  | 
|  | ath9k_do_vif_add_setup(hw, vif); | 
|  | out: | 
|  | mutex_unlock(&sc->mutex); | 
|  | ath9k_ps_restore(sc); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int ath9k_change_interface(struct ieee80211_hw *hw, | 
|  | struct ieee80211_vif *vif, | 
|  | enum nl80211_iftype new_type, | 
|  | bool p2p) | 
|  | { | 
|  | struct ath_softc *sc = hw->priv; | 
|  | struct ath_common *common = ath9k_hw_common(sc->sc_ah); | 
|  | int ret = 0; | 
|  |  | 
|  | ath_dbg(common, CONFIG, "Change Interface\n"); | 
|  | mutex_lock(&sc->mutex); | 
|  | ath9k_ps_wakeup(sc); | 
|  |  | 
|  | /* See if new interface type is valid. */ | 
|  | if ((new_type == NL80211_IFTYPE_ADHOC) && | 
|  | (sc->nvifs > 1)) { | 
|  | ath_err(common, "When using ADHOC, it must be the only" | 
|  | " interface.\n"); | 
|  | ret = -EINVAL; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (ath9k_uses_beacons(new_type) && | 
|  | !ath9k_uses_beacons(vif->type)) { | 
|  | if (sc->nbcnvifs >= ATH_BCBUF) { | 
|  | ath_err(common, "No beacon slot available\n"); | 
|  | ret = -ENOBUFS; | 
|  | goto out; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Clean up old vif stuff */ | 
|  | if (ath9k_uses_beacons(vif->type)) | 
|  | ath9k_reclaim_beacon(sc, vif); | 
|  |  | 
|  | /* Add new settings */ | 
|  | vif->type = new_type; | 
|  | vif->p2p = p2p; | 
|  |  | 
|  | ath9k_do_vif_add_setup(hw, vif); | 
|  | out: | 
|  | ath9k_ps_restore(sc); | 
|  | mutex_unlock(&sc->mutex); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void ath9k_remove_interface(struct ieee80211_hw *hw, | 
|  | struct ieee80211_vif *vif) | 
|  | { | 
|  | struct ath_softc *sc = hw->priv; | 
|  | struct ath_common *common = ath9k_hw_common(sc->sc_ah); | 
|  |  | 
|  | ath_dbg(common, CONFIG, "Detach Interface\n"); | 
|  |  | 
|  | ath9k_ps_wakeup(sc); | 
|  | mutex_lock(&sc->mutex); | 
|  |  | 
|  | sc->nvifs--; | 
|  |  | 
|  | /* Reclaim beacon resources */ | 
|  | if (ath9k_uses_beacons(vif->type)) | 
|  | ath9k_reclaim_beacon(sc, vif); | 
|  |  | 
|  | ath9k_calculate_summary_state(hw, NULL); | 
|  |  | 
|  | mutex_unlock(&sc->mutex); | 
|  | ath9k_ps_restore(sc); | 
|  | } | 
|  |  | 
|  | static void ath9k_enable_ps(struct ath_softc *sc) | 
|  | { | 
|  | struct ath_hw *ah = sc->sc_ah; | 
|  |  | 
|  | sc->ps_enabled = true; | 
|  | if (!(ah->caps.hw_caps & ATH9K_HW_CAP_AUTOSLEEP)) { | 
|  | if ((ah->imask & ATH9K_INT_TIM_TIMER) == 0) { | 
|  | ah->imask |= ATH9K_INT_TIM_TIMER; | 
|  | ath9k_hw_set_interrupts(ah); | 
|  | } | 
|  | ath9k_hw_setrxabort(ah, 1); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void ath9k_disable_ps(struct ath_softc *sc) | 
|  | { | 
|  | struct ath_hw *ah = sc->sc_ah; | 
|  |  | 
|  | sc->ps_enabled = false; | 
|  | ath9k_hw_setpower(ah, ATH9K_PM_AWAKE); | 
|  | if (!(ah->caps.hw_caps & ATH9K_HW_CAP_AUTOSLEEP)) { | 
|  | ath9k_hw_setrxabort(ah, 0); | 
|  | sc->ps_flags &= ~(PS_WAIT_FOR_BEACON | | 
|  | PS_WAIT_FOR_CAB | | 
|  | PS_WAIT_FOR_PSPOLL_DATA | | 
|  | PS_WAIT_FOR_TX_ACK); | 
|  | if (ah->imask & ATH9K_INT_TIM_TIMER) { | 
|  | ah->imask &= ~ATH9K_INT_TIM_TIMER; | 
|  | ath9k_hw_set_interrupts(ah); | 
|  | } | 
|  | } | 
|  |  | 
|  | } | 
|  |  | 
|  | static int ath9k_config(struct ieee80211_hw *hw, u32 changed) | 
|  | { | 
|  | struct ath_softc *sc = hw->priv; | 
|  | struct ath_hw *ah = sc->sc_ah; | 
|  | struct ath_common *common = ath9k_hw_common(ah); | 
|  | struct ieee80211_conf *conf = &hw->conf; | 
|  |  | 
|  | ath9k_ps_wakeup(sc); | 
|  | mutex_lock(&sc->mutex); | 
|  |  | 
|  | /* | 
|  | * Leave this as the first check because we need to turn on the | 
|  | * radio if it was disabled before prior to processing the rest | 
|  | * of the changes. Likewise we must only disable the radio towards | 
|  | * the end. | 
|  | */ | 
|  | if (changed & IEEE80211_CONF_CHANGE_IDLE) { | 
|  | sc->ps_idle = !!(conf->flags & IEEE80211_CONF_IDLE); | 
|  | if (sc->ps_idle) | 
|  | ath_cancel_work(sc); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * We just prepare to enable PS. We have to wait until our AP has | 
|  | * ACK'd our null data frame to disable RX otherwise we'll ignore | 
|  | * those ACKs and end up retransmitting the same null data frames. | 
|  | * IEEE80211_CONF_CHANGE_PS is only passed by mac80211 for STA mode. | 
|  | */ | 
|  | if (changed & IEEE80211_CONF_CHANGE_PS) { | 
|  | unsigned long flags; | 
|  | spin_lock_irqsave(&sc->sc_pm_lock, flags); | 
|  | if (conf->flags & IEEE80211_CONF_PS) | 
|  | ath9k_enable_ps(sc); | 
|  | else | 
|  | ath9k_disable_ps(sc); | 
|  | spin_unlock_irqrestore(&sc->sc_pm_lock, flags); | 
|  | } | 
|  |  | 
|  | if (changed & IEEE80211_CONF_CHANGE_MONITOR) { | 
|  | if (conf->flags & IEEE80211_CONF_MONITOR) { | 
|  | ath_dbg(common, CONFIG, "Monitor mode is enabled\n"); | 
|  | sc->sc_ah->is_monitoring = true; | 
|  | } else { | 
|  | ath_dbg(common, CONFIG, "Monitor mode is disabled\n"); | 
|  | sc->sc_ah->is_monitoring = false; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (changed & IEEE80211_CONF_CHANGE_CHANNEL) { | 
|  | struct ieee80211_channel *curchan = hw->conf.channel; | 
|  | int pos = curchan->hw_value; | 
|  | int old_pos = -1; | 
|  | unsigned long flags; | 
|  |  | 
|  | if (ah->curchan) | 
|  | old_pos = ah->curchan - &ah->channels[0]; | 
|  |  | 
|  | if (hw->conf.flags & IEEE80211_CONF_OFFCHANNEL) | 
|  | sc->sc_flags |= SC_OP_OFFCHANNEL; | 
|  | else | 
|  | sc->sc_flags &= ~SC_OP_OFFCHANNEL; | 
|  |  | 
|  | ath_dbg(common, CONFIG, "Set channel: %d MHz type: %d\n", | 
|  | curchan->center_freq, conf->channel_type); | 
|  |  | 
|  | /* update survey stats for the old channel before switching */ | 
|  | spin_lock_irqsave(&common->cc_lock, flags); | 
|  | ath_update_survey_stats(sc); | 
|  | spin_unlock_irqrestore(&common->cc_lock, flags); | 
|  |  | 
|  | /* | 
|  | * Preserve the current channel values, before updating | 
|  | * the same channel | 
|  | */ | 
|  | if (ah->curchan && (old_pos == pos)) | 
|  | ath9k_hw_getnf(ah, ah->curchan); | 
|  |  | 
|  | ath9k_cmn_update_ichannel(&sc->sc_ah->channels[pos], | 
|  | curchan, conf->channel_type); | 
|  |  | 
|  | /* | 
|  | * If the operating channel changes, change the survey in-use flags | 
|  | * along with it. | 
|  | * Reset the survey data for the new channel, unless we're switching | 
|  | * back to the operating channel from an off-channel operation. | 
|  | */ | 
|  | if (!(hw->conf.flags & IEEE80211_CONF_OFFCHANNEL) && | 
|  | sc->cur_survey != &sc->survey[pos]) { | 
|  |  | 
|  | if (sc->cur_survey) | 
|  | sc->cur_survey->filled &= ~SURVEY_INFO_IN_USE; | 
|  |  | 
|  | sc->cur_survey = &sc->survey[pos]; | 
|  |  | 
|  | memset(sc->cur_survey, 0, sizeof(struct survey_info)); | 
|  | sc->cur_survey->filled |= SURVEY_INFO_IN_USE; | 
|  | } else if (!(sc->survey[pos].filled & SURVEY_INFO_IN_USE)) { | 
|  | memset(&sc->survey[pos], 0, sizeof(struct survey_info)); | 
|  | } | 
|  |  | 
|  | if (ath_set_channel(sc, hw, &sc->sc_ah->channels[pos]) < 0) { | 
|  | ath_err(common, "Unable to set channel\n"); | 
|  | mutex_unlock(&sc->mutex); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * The most recent snapshot of channel->noisefloor for the old | 
|  | * channel is only available after the hardware reset. Copy it to | 
|  | * the survey stats now. | 
|  | */ | 
|  | if (old_pos >= 0) | 
|  | ath_update_survey_nf(sc, old_pos); | 
|  | } | 
|  |  | 
|  | if (changed & IEEE80211_CONF_CHANGE_POWER) { | 
|  | ath_dbg(common, CONFIG, "Set power: %d\n", conf->power_level); | 
|  | sc->config.txpowlimit = 2 * conf->power_level; | 
|  | ath9k_cmn_update_txpow(ah, sc->curtxpow, | 
|  | sc->config.txpowlimit, &sc->curtxpow); | 
|  | } | 
|  |  | 
|  | mutex_unlock(&sc->mutex); | 
|  | ath9k_ps_restore(sc); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #define SUPPORTED_FILTERS			\ | 
|  | (FIF_PROMISC_IN_BSS |			\ | 
|  | FIF_ALLMULTI |				\ | 
|  | FIF_CONTROL |				\ | 
|  | FIF_PSPOLL |				\ | 
|  | FIF_OTHER_BSS |				\ | 
|  | FIF_BCN_PRBRESP_PROMISC |		\ | 
|  | FIF_PROBE_REQ |				\ | 
|  | FIF_FCSFAIL) | 
|  |  | 
|  | /* FIXME: sc->sc_full_reset ? */ | 
|  | static void ath9k_configure_filter(struct ieee80211_hw *hw, | 
|  | unsigned int changed_flags, | 
|  | unsigned int *total_flags, | 
|  | u64 multicast) | 
|  | { | 
|  | struct ath_softc *sc = hw->priv; | 
|  | u32 rfilt; | 
|  |  | 
|  | changed_flags &= SUPPORTED_FILTERS; | 
|  | *total_flags &= SUPPORTED_FILTERS; | 
|  |  | 
|  | sc->rx.rxfilter = *total_flags; | 
|  | ath9k_ps_wakeup(sc); | 
|  | rfilt = ath_calcrxfilter(sc); | 
|  | ath9k_hw_setrxfilter(sc->sc_ah, rfilt); | 
|  | ath9k_ps_restore(sc); | 
|  |  | 
|  | ath_dbg(ath9k_hw_common(sc->sc_ah), CONFIG, "Set HW RX filter: 0x%x\n", | 
|  | rfilt); | 
|  | } | 
|  |  | 
|  | static int ath9k_sta_add(struct ieee80211_hw *hw, | 
|  | struct ieee80211_vif *vif, | 
|  | struct ieee80211_sta *sta) | 
|  | { | 
|  | struct ath_softc *sc = hw->priv; | 
|  | struct ath_common *common = ath9k_hw_common(sc->sc_ah); | 
|  | struct ath_node *an = (struct ath_node *) sta->drv_priv; | 
|  | struct ieee80211_key_conf ps_key = { }; | 
|  |  | 
|  | ath_node_attach(sc, sta, vif); | 
|  |  | 
|  | if (vif->type != NL80211_IFTYPE_AP && | 
|  | vif->type != NL80211_IFTYPE_AP_VLAN) | 
|  | return 0; | 
|  |  | 
|  | an->ps_key = ath_key_config(common, vif, sta, &ps_key); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void ath9k_del_ps_key(struct ath_softc *sc, | 
|  | struct ieee80211_vif *vif, | 
|  | struct ieee80211_sta *sta) | 
|  | { | 
|  | struct ath_common *common = ath9k_hw_common(sc->sc_ah); | 
|  | struct ath_node *an = (struct ath_node *) sta->drv_priv; | 
|  | struct ieee80211_key_conf ps_key = { .hw_key_idx = an->ps_key }; | 
|  |  | 
|  | if (!an->ps_key) | 
|  | return; | 
|  |  | 
|  | ath_key_delete(common, &ps_key); | 
|  | } | 
|  |  | 
|  | static int ath9k_sta_remove(struct ieee80211_hw *hw, | 
|  | struct ieee80211_vif *vif, | 
|  | struct ieee80211_sta *sta) | 
|  | { | 
|  | struct ath_softc *sc = hw->priv; | 
|  |  | 
|  | ath9k_del_ps_key(sc, vif, sta); | 
|  | ath_node_detach(sc, sta); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void ath9k_sta_notify(struct ieee80211_hw *hw, | 
|  | struct ieee80211_vif *vif, | 
|  | enum sta_notify_cmd cmd, | 
|  | struct ieee80211_sta *sta) | 
|  | { | 
|  | struct ath_softc *sc = hw->priv; | 
|  | struct ath_node *an = (struct ath_node *) sta->drv_priv; | 
|  |  | 
|  | if (!(sc->sc_flags & SC_OP_TXAGGR)) | 
|  | return; | 
|  |  | 
|  | switch (cmd) { | 
|  | case STA_NOTIFY_SLEEP: | 
|  | an->sleeping = true; | 
|  | ath_tx_aggr_sleep(sta, sc, an); | 
|  | break; | 
|  | case STA_NOTIFY_AWAKE: | 
|  | an->sleeping = false; | 
|  | ath_tx_aggr_wakeup(sc, an); | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | static int ath9k_conf_tx(struct ieee80211_hw *hw, | 
|  | struct ieee80211_vif *vif, u16 queue, | 
|  | const struct ieee80211_tx_queue_params *params) | 
|  | { | 
|  | struct ath_softc *sc = hw->priv; | 
|  | struct ath_common *common = ath9k_hw_common(sc->sc_ah); | 
|  | struct ath_txq *txq; | 
|  | struct ath9k_tx_queue_info qi; | 
|  | int ret = 0; | 
|  |  | 
|  | if (queue >= WME_NUM_AC) | 
|  | return 0; | 
|  |  | 
|  | txq = sc->tx.txq_map[queue]; | 
|  |  | 
|  | ath9k_ps_wakeup(sc); | 
|  | mutex_lock(&sc->mutex); | 
|  |  | 
|  | memset(&qi, 0, sizeof(struct ath9k_tx_queue_info)); | 
|  |  | 
|  | qi.tqi_aifs = params->aifs; | 
|  | qi.tqi_cwmin = params->cw_min; | 
|  | qi.tqi_cwmax = params->cw_max; | 
|  | qi.tqi_burstTime = params->txop; | 
|  |  | 
|  | ath_dbg(common, CONFIG, | 
|  | "Configure tx [queue/halq] [%d/%d], aifs: %d, cw_min: %d, cw_max: %d, txop: %d\n", | 
|  | queue, txq->axq_qnum, params->aifs, params->cw_min, | 
|  | params->cw_max, params->txop); | 
|  |  | 
|  | ret = ath_txq_update(sc, txq->axq_qnum, &qi); | 
|  | if (ret) | 
|  | ath_err(common, "TXQ Update failed\n"); | 
|  |  | 
|  | if (sc->sc_ah->opmode == NL80211_IFTYPE_ADHOC) | 
|  | if (queue == WME_AC_BE && !ret) | 
|  | ath_beaconq_config(sc); | 
|  |  | 
|  | mutex_unlock(&sc->mutex); | 
|  | ath9k_ps_restore(sc); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int ath9k_set_key(struct ieee80211_hw *hw, | 
|  | enum set_key_cmd cmd, | 
|  | struct ieee80211_vif *vif, | 
|  | struct ieee80211_sta *sta, | 
|  | struct ieee80211_key_conf *key) | 
|  | { | 
|  | struct ath_softc *sc = hw->priv; | 
|  | struct ath_common *common = ath9k_hw_common(sc->sc_ah); | 
|  | int ret = 0; | 
|  |  | 
|  | if (ath9k_modparam_nohwcrypt) | 
|  | return -ENOSPC; | 
|  |  | 
|  | if ((vif->type == NL80211_IFTYPE_ADHOC || | 
|  | vif->type == NL80211_IFTYPE_MESH_POINT) && | 
|  | (key->cipher == WLAN_CIPHER_SUITE_TKIP || | 
|  | key->cipher == WLAN_CIPHER_SUITE_CCMP) && | 
|  | !(key->flags & IEEE80211_KEY_FLAG_PAIRWISE)) { | 
|  | /* | 
|  | * For now, disable hw crypto for the RSN IBSS group keys. This | 
|  | * could be optimized in the future to use a modified key cache | 
|  | * design to support per-STA RX GTK, but until that gets | 
|  | * implemented, use of software crypto for group addressed | 
|  | * frames is a acceptable to allow RSN IBSS to be used. | 
|  | */ | 
|  | return -EOPNOTSUPP; | 
|  | } | 
|  |  | 
|  | mutex_lock(&sc->mutex); | 
|  | ath9k_ps_wakeup(sc); | 
|  | ath_dbg(common, CONFIG, "Set HW Key\n"); | 
|  |  | 
|  | switch (cmd) { | 
|  | case SET_KEY: | 
|  | if (sta) | 
|  | ath9k_del_ps_key(sc, vif, sta); | 
|  |  | 
|  | ret = ath_key_config(common, vif, sta, key); | 
|  | if (ret >= 0) { | 
|  | key->hw_key_idx = ret; | 
|  | /* push IV and Michael MIC generation to stack */ | 
|  | key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV; | 
|  | if (key->cipher == WLAN_CIPHER_SUITE_TKIP) | 
|  | key->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC; | 
|  | if (sc->sc_ah->sw_mgmt_crypto && | 
|  | key->cipher == WLAN_CIPHER_SUITE_CCMP) | 
|  | key->flags |= IEEE80211_KEY_FLAG_SW_MGMT; | 
|  | ret = 0; | 
|  | } | 
|  | break; | 
|  | case DISABLE_KEY: | 
|  | ath_key_delete(common, key); | 
|  | break; | 
|  | default: | 
|  | ret = -EINVAL; | 
|  | } | 
|  |  | 
|  | ath9k_ps_restore(sc); | 
|  | mutex_unlock(&sc->mutex); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  | static void ath9k_bss_iter(void *data, u8 *mac, struct ieee80211_vif *vif) | 
|  | { | 
|  | struct ath_softc *sc = data; | 
|  | struct ath_common *common = ath9k_hw_common(sc->sc_ah); | 
|  | struct ieee80211_bss_conf *bss_conf = &vif->bss_conf; | 
|  | struct ath_vif *avp = (void *)vif->drv_priv; | 
|  |  | 
|  | /* | 
|  | * Skip iteration if primary station vif's bss info | 
|  | * was not changed | 
|  | */ | 
|  | if (sc->sc_flags & SC_OP_PRIM_STA_VIF) | 
|  | return; | 
|  |  | 
|  | if (bss_conf->assoc) { | 
|  | sc->sc_flags |= SC_OP_PRIM_STA_VIF; | 
|  | avp->primary_sta_vif = true; | 
|  | memcpy(common->curbssid, bss_conf->bssid, ETH_ALEN); | 
|  | common->curaid = bss_conf->aid; | 
|  | ath9k_hw_write_associd(sc->sc_ah); | 
|  | ath_dbg(common, CONFIG, "Bss Info ASSOC %d, bssid: %pM\n", | 
|  | bss_conf->aid, common->curbssid); | 
|  | ath_beacon_config(sc, vif); | 
|  | /* | 
|  | * Request a re-configuration of Beacon related timers | 
|  | * on the receipt of the first Beacon frame (i.e., | 
|  | * after time sync with the AP). | 
|  | */ | 
|  | sc->ps_flags |= PS_BEACON_SYNC | PS_WAIT_FOR_BEACON; | 
|  | /* Reset rssi stats */ | 
|  | sc->last_rssi = ATH_RSSI_DUMMY_MARKER; | 
|  | sc->sc_ah->stats.avgbrssi = ATH_RSSI_DUMMY_MARKER; | 
|  |  | 
|  | if (!common->disable_ani) { | 
|  | sc->sc_flags |= SC_OP_ANI_RUN; | 
|  | ath_start_ani(common); | 
|  | } | 
|  |  | 
|  | } | 
|  | } | 
|  |  | 
|  | static void ath9k_config_bss(struct ath_softc *sc, struct ieee80211_vif *vif) | 
|  | { | 
|  | struct ath_common *common = ath9k_hw_common(sc->sc_ah); | 
|  | struct ieee80211_bss_conf *bss_conf = &vif->bss_conf; | 
|  | struct ath_vif *avp = (void *)vif->drv_priv; | 
|  |  | 
|  | if (sc->sc_ah->opmode != NL80211_IFTYPE_STATION) | 
|  | return; | 
|  |  | 
|  | /* Reconfigure bss info */ | 
|  | if (avp->primary_sta_vif && !bss_conf->assoc) { | 
|  | ath_dbg(common, CONFIG, "Bss Info DISASSOC %d, bssid %pM\n", | 
|  | common->curaid, common->curbssid); | 
|  | sc->sc_flags &= ~(SC_OP_PRIM_STA_VIF | SC_OP_BEACONS); | 
|  | avp->primary_sta_vif = false; | 
|  | memset(common->curbssid, 0, ETH_ALEN); | 
|  | common->curaid = 0; | 
|  | } | 
|  |  | 
|  | ieee80211_iterate_active_interfaces_atomic( | 
|  | sc->hw, ath9k_bss_iter, sc); | 
|  |  | 
|  | /* | 
|  | * None of station vifs are associated. | 
|  | * Clear bssid & aid | 
|  | */ | 
|  | if (!(sc->sc_flags & SC_OP_PRIM_STA_VIF)) { | 
|  | ath9k_hw_write_associd(sc->sc_ah); | 
|  | /* Stop ANI */ | 
|  | sc->sc_flags &= ~SC_OP_ANI_RUN; | 
|  | del_timer_sync(&common->ani.timer); | 
|  | memset(&sc->caldata, 0, sizeof(sc->caldata)); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void ath9k_bss_info_changed(struct ieee80211_hw *hw, | 
|  | struct ieee80211_vif *vif, | 
|  | struct ieee80211_bss_conf *bss_conf, | 
|  | u32 changed) | 
|  | { | 
|  | struct ath_softc *sc = hw->priv; | 
|  | struct ath_hw *ah = sc->sc_ah; | 
|  | struct ath_common *common = ath9k_hw_common(ah); | 
|  | struct ath_vif *avp = (void *)vif->drv_priv; | 
|  | int slottime; | 
|  | int error; | 
|  |  | 
|  | ath9k_ps_wakeup(sc); | 
|  | mutex_lock(&sc->mutex); | 
|  |  | 
|  | if (changed & BSS_CHANGED_BSSID) { | 
|  | ath9k_config_bss(sc, vif); | 
|  |  | 
|  | ath_dbg(common, CONFIG, "BSSID: %pM aid: 0x%x\n", | 
|  | common->curbssid, common->curaid); | 
|  | } | 
|  |  | 
|  | if (changed & BSS_CHANGED_IBSS) { | 
|  | /* There can be only one vif available */ | 
|  | memcpy(common->curbssid, bss_conf->bssid, ETH_ALEN); | 
|  | common->curaid = bss_conf->aid; | 
|  | ath9k_hw_write_associd(sc->sc_ah); | 
|  |  | 
|  | if (bss_conf->ibss_joined) { | 
|  | sc->sc_ah->stats.avgbrssi = ATH_RSSI_DUMMY_MARKER; | 
|  |  | 
|  | if (!common->disable_ani) { | 
|  | sc->sc_flags |= SC_OP_ANI_RUN; | 
|  | ath_start_ani(common); | 
|  | } | 
|  |  | 
|  | } else { | 
|  | sc->sc_flags &= ~SC_OP_ANI_RUN; | 
|  | del_timer_sync(&common->ani.timer); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Enable transmission of beacons (AP, IBSS, MESH) */ | 
|  | if ((changed & BSS_CHANGED_BEACON) || | 
|  | ((changed & BSS_CHANGED_BEACON_ENABLED) && bss_conf->enable_beacon)) { | 
|  | ath9k_set_beaconing_status(sc, false); | 
|  | error = ath_beacon_alloc(sc, vif); | 
|  | if (!error) | 
|  | ath_beacon_config(sc, vif); | 
|  | ath9k_set_beaconing_status(sc, true); | 
|  | } | 
|  |  | 
|  | if (changed & BSS_CHANGED_ERP_SLOT) { | 
|  | if (bss_conf->use_short_slot) | 
|  | slottime = 9; | 
|  | else | 
|  | slottime = 20; | 
|  | if (vif->type == NL80211_IFTYPE_AP) { | 
|  | /* | 
|  | * Defer update, so that connected stations can adjust | 
|  | * their settings at the same time. | 
|  | * See beacon.c for more details | 
|  | */ | 
|  | sc->beacon.slottime = slottime; | 
|  | sc->beacon.updateslot = UPDATE; | 
|  | } else { | 
|  | ah->slottime = slottime; | 
|  | ath9k_hw_init_global_settings(ah); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Disable transmission of beacons */ | 
|  | if ((changed & BSS_CHANGED_BEACON_ENABLED) && | 
|  | !bss_conf->enable_beacon) { | 
|  | ath9k_set_beaconing_status(sc, false); | 
|  | avp->is_bslot_active = false; | 
|  | ath9k_set_beaconing_status(sc, true); | 
|  | } | 
|  |  | 
|  | if (changed & BSS_CHANGED_BEACON_INT) { | 
|  | /* | 
|  | * In case of AP mode, the HW TSF has to be reset | 
|  | * when the beacon interval changes. | 
|  | */ | 
|  | if (vif->type == NL80211_IFTYPE_AP) { | 
|  | sc->sc_flags |= SC_OP_TSF_RESET; | 
|  | ath9k_set_beaconing_status(sc, false); | 
|  | error = ath_beacon_alloc(sc, vif); | 
|  | if (!error) | 
|  | ath_beacon_config(sc, vif); | 
|  | ath9k_set_beaconing_status(sc, true); | 
|  | } else | 
|  | ath_beacon_config(sc, vif); | 
|  | } | 
|  |  | 
|  | if (changed & BSS_CHANGED_ERP_PREAMBLE) { | 
|  | ath_dbg(common, CONFIG, "BSS Changed PREAMBLE %d\n", | 
|  | bss_conf->use_short_preamble); | 
|  | if (bss_conf->use_short_preamble) | 
|  | sc->sc_flags |= SC_OP_PREAMBLE_SHORT; | 
|  | else | 
|  | sc->sc_flags &= ~SC_OP_PREAMBLE_SHORT; | 
|  | } | 
|  |  | 
|  | if (changed & BSS_CHANGED_ERP_CTS_PROT) { | 
|  | ath_dbg(common, CONFIG, "BSS Changed CTS PROT %d\n", | 
|  | bss_conf->use_cts_prot); | 
|  | if (bss_conf->use_cts_prot && | 
|  | hw->conf.channel->band != IEEE80211_BAND_5GHZ) | 
|  | sc->sc_flags |= SC_OP_PROTECT_ENABLE; | 
|  | else | 
|  | sc->sc_flags &= ~SC_OP_PROTECT_ENABLE; | 
|  | } | 
|  |  | 
|  | mutex_unlock(&sc->mutex); | 
|  | ath9k_ps_restore(sc); | 
|  | } | 
|  |  | 
|  | static u64 ath9k_get_tsf(struct ieee80211_hw *hw, struct ieee80211_vif *vif) | 
|  | { | 
|  | struct ath_softc *sc = hw->priv; | 
|  | u64 tsf; | 
|  |  | 
|  | mutex_lock(&sc->mutex); | 
|  | ath9k_ps_wakeup(sc); | 
|  | tsf = ath9k_hw_gettsf64(sc->sc_ah); | 
|  | ath9k_ps_restore(sc); | 
|  | mutex_unlock(&sc->mutex); | 
|  |  | 
|  | return tsf; | 
|  | } | 
|  |  | 
|  | static void ath9k_set_tsf(struct ieee80211_hw *hw, | 
|  | struct ieee80211_vif *vif, | 
|  | u64 tsf) | 
|  | { | 
|  | struct ath_softc *sc = hw->priv; | 
|  |  | 
|  | mutex_lock(&sc->mutex); | 
|  | ath9k_ps_wakeup(sc); | 
|  | ath9k_hw_settsf64(sc->sc_ah, tsf); | 
|  | ath9k_ps_restore(sc); | 
|  | mutex_unlock(&sc->mutex); | 
|  | } | 
|  |  | 
|  | static void ath9k_reset_tsf(struct ieee80211_hw *hw, struct ieee80211_vif *vif) | 
|  | { | 
|  | struct ath_softc *sc = hw->priv; | 
|  |  | 
|  | mutex_lock(&sc->mutex); | 
|  |  | 
|  | ath9k_ps_wakeup(sc); | 
|  | ath9k_hw_reset_tsf(sc->sc_ah); | 
|  | ath9k_ps_restore(sc); | 
|  |  | 
|  | mutex_unlock(&sc->mutex); | 
|  | } | 
|  |  | 
|  | static int ath9k_ampdu_action(struct ieee80211_hw *hw, | 
|  | struct ieee80211_vif *vif, | 
|  | enum ieee80211_ampdu_mlme_action action, | 
|  | struct ieee80211_sta *sta, | 
|  | u16 tid, u16 *ssn, u8 buf_size) | 
|  | { | 
|  | struct ath_softc *sc = hw->priv; | 
|  | int ret = 0; | 
|  |  | 
|  | local_bh_disable(); | 
|  |  | 
|  | switch (action) { | 
|  | case IEEE80211_AMPDU_RX_START: | 
|  | if (!(sc->sc_flags & SC_OP_RXAGGR)) | 
|  | ret = -ENOTSUPP; | 
|  | break; | 
|  | case IEEE80211_AMPDU_RX_STOP: | 
|  | break; | 
|  | case IEEE80211_AMPDU_TX_START: | 
|  | if (!(sc->sc_flags & SC_OP_TXAGGR)) | 
|  | return -EOPNOTSUPP; | 
|  |  | 
|  | ath9k_ps_wakeup(sc); | 
|  | ret = ath_tx_aggr_start(sc, sta, tid, ssn); | 
|  | if (!ret) | 
|  | ieee80211_start_tx_ba_cb_irqsafe(vif, sta->addr, tid); | 
|  | ath9k_ps_restore(sc); | 
|  | break; | 
|  | case IEEE80211_AMPDU_TX_STOP: | 
|  | ath9k_ps_wakeup(sc); | 
|  | ath_tx_aggr_stop(sc, sta, tid); | 
|  | ieee80211_stop_tx_ba_cb_irqsafe(vif, sta->addr, tid); | 
|  | ath9k_ps_restore(sc); | 
|  | break; | 
|  | case IEEE80211_AMPDU_TX_OPERATIONAL: | 
|  | ath9k_ps_wakeup(sc); | 
|  | ath_tx_aggr_resume(sc, sta, tid); | 
|  | ath9k_ps_restore(sc); | 
|  | break; | 
|  | default: | 
|  | ath_err(ath9k_hw_common(sc->sc_ah), "Unknown AMPDU action\n"); | 
|  | } | 
|  |  | 
|  | local_bh_enable(); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int ath9k_get_survey(struct ieee80211_hw *hw, int idx, | 
|  | struct survey_info *survey) | 
|  | { | 
|  | struct ath_softc *sc = hw->priv; | 
|  | struct ath_common *common = ath9k_hw_common(sc->sc_ah); | 
|  | struct ieee80211_supported_band *sband; | 
|  | struct ieee80211_channel *chan; | 
|  | unsigned long flags; | 
|  | int pos; | 
|  |  | 
|  | spin_lock_irqsave(&common->cc_lock, flags); | 
|  | if (idx == 0) | 
|  | ath_update_survey_stats(sc); | 
|  |  | 
|  | sband = hw->wiphy->bands[IEEE80211_BAND_2GHZ]; | 
|  | if (sband && idx >= sband->n_channels) { | 
|  | idx -= sband->n_channels; | 
|  | sband = NULL; | 
|  | } | 
|  |  | 
|  | if (!sband) | 
|  | sband = hw->wiphy->bands[IEEE80211_BAND_5GHZ]; | 
|  |  | 
|  | if (!sband || idx >= sband->n_channels) { | 
|  | spin_unlock_irqrestore(&common->cc_lock, flags); | 
|  | return -ENOENT; | 
|  | } | 
|  |  | 
|  | chan = &sband->channels[idx]; | 
|  | pos = chan->hw_value; | 
|  | memcpy(survey, &sc->survey[pos], sizeof(*survey)); | 
|  | survey->channel = chan; | 
|  | spin_unlock_irqrestore(&common->cc_lock, flags); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void ath9k_set_coverage_class(struct ieee80211_hw *hw, u8 coverage_class) | 
|  | { | 
|  | struct ath_softc *sc = hw->priv; | 
|  | struct ath_hw *ah = sc->sc_ah; | 
|  |  | 
|  | mutex_lock(&sc->mutex); | 
|  | ah->coverage_class = coverage_class; | 
|  |  | 
|  | ath9k_ps_wakeup(sc); | 
|  | ath9k_hw_init_global_settings(ah); | 
|  | ath9k_ps_restore(sc); | 
|  |  | 
|  | mutex_unlock(&sc->mutex); | 
|  | } | 
|  |  | 
|  | static void ath9k_flush(struct ieee80211_hw *hw, bool drop) | 
|  | { | 
|  | struct ath_softc *sc = hw->priv; | 
|  | struct ath_hw *ah = sc->sc_ah; | 
|  | struct ath_common *common = ath9k_hw_common(ah); | 
|  | int timeout = 200; /* ms */ | 
|  | int i, j; | 
|  | bool drain_txq; | 
|  |  | 
|  | mutex_lock(&sc->mutex); | 
|  | cancel_delayed_work_sync(&sc->tx_complete_work); | 
|  |  | 
|  | if (ah->ah_flags & AH_UNPLUGGED) { | 
|  | ath_dbg(common, ANY, "Device has been unplugged!\n"); | 
|  | mutex_unlock(&sc->mutex); | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (sc->sc_flags & SC_OP_INVALID) { | 
|  | ath_dbg(common, ANY, "Device not present\n"); | 
|  | mutex_unlock(&sc->mutex); | 
|  | return; | 
|  | } | 
|  |  | 
|  | for (j = 0; j < timeout; j++) { | 
|  | bool npend = false; | 
|  |  | 
|  | if (j) | 
|  | usleep_range(1000, 2000); | 
|  |  | 
|  | for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++) { | 
|  | if (!ATH_TXQ_SETUP(sc, i)) | 
|  | continue; | 
|  |  | 
|  | npend = ath9k_has_pending_frames(sc, &sc->tx.txq[i]); | 
|  |  | 
|  | if (npend) | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (!npend) | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (drop) { | 
|  | ath9k_ps_wakeup(sc); | 
|  | spin_lock_bh(&sc->sc_pcu_lock); | 
|  | drain_txq = ath_drain_all_txq(sc, false); | 
|  | spin_unlock_bh(&sc->sc_pcu_lock); | 
|  |  | 
|  | if (!drain_txq) | 
|  | ath_reset(sc, false); | 
|  |  | 
|  | ath9k_ps_restore(sc); | 
|  | ieee80211_wake_queues(hw); | 
|  | } | 
|  |  | 
|  | ieee80211_queue_delayed_work(hw, &sc->tx_complete_work, 0); | 
|  | mutex_unlock(&sc->mutex); | 
|  | } | 
|  |  | 
|  | static bool ath9k_tx_frames_pending(struct ieee80211_hw *hw) | 
|  | { | 
|  | struct ath_softc *sc = hw->priv; | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++) { | 
|  | if (!ATH_TXQ_SETUP(sc, i)) | 
|  | continue; | 
|  |  | 
|  | if (ath9k_has_pending_frames(sc, &sc->tx.txq[i])) | 
|  | return true; | 
|  | } | 
|  | return false; | 
|  | } | 
|  |  | 
|  | static int ath9k_tx_last_beacon(struct ieee80211_hw *hw) | 
|  | { | 
|  | struct ath_softc *sc = hw->priv; | 
|  | struct ath_hw *ah = sc->sc_ah; | 
|  | struct ieee80211_vif *vif; | 
|  | struct ath_vif *avp; | 
|  | struct ath_buf *bf; | 
|  | struct ath_tx_status ts; | 
|  | int status; | 
|  |  | 
|  | vif = sc->beacon.bslot[0]; | 
|  | if (!vif) | 
|  | return 0; | 
|  |  | 
|  | avp = (void *)vif->drv_priv; | 
|  | if (!avp->is_bslot_active) | 
|  | return 0; | 
|  |  | 
|  | if (!sc->beacon.tx_processed) { | 
|  | tasklet_disable(&sc->bcon_tasklet); | 
|  |  | 
|  | bf = avp->av_bcbuf; | 
|  | if (!bf || !bf->bf_mpdu) | 
|  | goto skip; | 
|  |  | 
|  | status = ath9k_hw_txprocdesc(ah, bf->bf_desc, &ts); | 
|  | if (status == -EINPROGRESS) | 
|  | goto skip; | 
|  |  | 
|  | sc->beacon.tx_processed = true; | 
|  | sc->beacon.tx_last = !(ts.ts_status & ATH9K_TXERR_MASK); | 
|  |  | 
|  | skip: | 
|  | tasklet_enable(&sc->bcon_tasklet); | 
|  | } | 
|  |  | 
|  | return sc->beacon.tx_last; | 
|  | } | 
|  |  | 
|  | static int ath9k_get_stats(struct ieee80211_hw *hw, | 
|  | struct ieee80211_low_level_stats *stats) | 
|  | { | 
|  | struct ath_softc *sc = hw->priv; | 
|  | struct ath_hw *ah = sc->sc_ah; | 
|  | struct ath9k_mib_stats *mib_stats = &ah->ah_mibStats; | 
|  |  | 
|  | stats->dot11ACKFailureCount = mib_stats->ackrcv_bad; | 
|  | stats->dot11RTSFailureCount = mib_stats->rts_bad; | 
|  | stats->dot11FCSErrorCount = mib_stats->fcs_bad; | 
|  | stats->dot11RTSSuccessCount = mib_stats->rts_good; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static u32 fill_chainmask(u32 cap, u32 new) | 
|  | { | 
|  | u32 filled = 0; | 
|  | int i; | 
|  |  | 
|  | for (i = 0; cap && new; i++, cap >>= 1) { | 
|  | if (!(cap & BIT(0))) | 
|  | continue; | 
|  |  | 
|  | if (new & BIT(0)) | 
|  | filled |= BIT(i); | 
|  |  | 
|  | new >>= 1; | 
|  | } | 
|  |  | 
|  | return filled; | 
|  | } | 
|  |  | 
|  | static int ath9k_set_antenna(struct ieee80211_hw *hw, u32 tx_ant, u32 rx_ant) | 
|  | { | 
|  | struct ath_softc *sc = hw->priv; | 
|  | struct ath_hw *ah = sc->sc_ah; | 
|  |  | 
|  | if (!rx_ant || !tx_ant) | 
|  | return -EINVAL; | 
|  |  | 
|  | sc->ant_rx = rx_ant; | 
|  | sc->ant_tx = tx_ant; | 
|  |  | 
|  | if (ah->caps.rx_chainmask == 1) | 
|  | return 0; | 
|  |  | 
|  | /* AR9100 runs into calibration issues if not all rx chains are enabled */ | 
|  | if (AR_SREV_9100(ah)) | 
|  | ah->rxchainmask = 0x7; | 
|  | else | 
|  | ah->rxchainmask = fill_chainmask(ah->caps.rx_chainmask, rx_ant); | 
|  |  | 
|  | ah->txchainmask = fill_chainmask(ah->caps.tx_chainmask, tx_ant); | 
|  | ath9k_reload_chainmask_settings(sc); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ath9k_get_antenna(struct ieee80211_hw *hw, u32 *tx_ant, u32 *rx_ant) | 
|  | { | 
|  | struct ath_softc *sc = hw->priv; | 
|  |  | 
|  | *tx_ant = sc->ant_tx; | 
|  | *rx_ant = sc->ant_rx; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | struct ieee80211_ops ath9k_ops = { | 
|  | .tx 		    = ath9k_tx, | 
|  | .start 		    = ath9k_start, | 
|  | .stop 		    = ath9k_stop, | 
|  | .add_interface 	    = ath9k_add_interface, | 
|  | .change_interface   = ath9k_change_interface, | 
|  | .remove_interface   = ath9k_remove_interface, | 
|  | .config 	    = ath9k_config, | 
|  | .configure_filter   = ath9k_configure_filter, | 
|  | .sta_add	    = ath9k_sta_add, | 
|  | .sta_remove	    = ath9k_sta_remove, | 
|  | .sta_notify         = ath9k_sta_notify, | 
|  | .conf_tx 	    = ath9k_conf_tx, | 
|  | .bss_info_changed   = ath9k_bss_info_changed, | 
|  | .set_key            = ath9k_set_key, | 
|  | .get_tsf 	    = ath9k_get_tsf, | 
|  | .set_tsf 	    = ath9k_set_tsf, | 
|  | .reset_tsf 	    = ath9k_reset_tsf, | 
|  | .ampdu_action       = ath9k_ampdu_action, | 
|  | .get_survey	    = ath9k_get_survey, | 
|  | .rfkill_poll        = ath9k_rfkill_poll_state, | 
|  | .set_coverage_class = ath9k_set_coverage_class, | 
|  | .flush		    = ath9k_flush, | 
|  | .tx_frames_pending  = ath9k_tx_frames_pending, | 
|  | .tx_last_beacon     = ath9k_tx_last_beacon, | 
|  | .get_stats	    = ath9k_get_stats, | 
|  | .set_antenna	    = ath9k_set_antenna, | 
|  | .get_antenna	    = ath9k_get_antenna, | 
|  | }; |