| /* |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License version 2 as published |
| * by the Free Software Foundation. |
| * |
| * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> |
| */ |
| |
| #include <linux/io.h> |
| #include <linux/serial_reg.h> |
| |
| #include <asm/addrspace.h> |
| #include <asm/setup.h> |
| |
| #ifdef CONFIG_SOC_RT288X |
| #define EARLY_UART_BASE 0x300c00 |
| #define CHIPID_BASE 0x300004 |
| #elif defined(CONFIG_SOC_MT7621) |
| #define EARLY_UART_BASE 0x1E000c00 |
| #define CHIPID_BASE 0x1E000004 |
| #else |
| #define EARLY_UART_BASE 0x10000c00 |
| #define CHIPID_BASE 0x10000004 |
| #endif |
| |
| #define MT7628_CHIP_NAME1 0x20203832 |
| |
| #define UART_REG_TX 0x04 |
| #define UART_REG_LCR 0x0c |
| #define UART_REG_LSR 0x14 |
| #define UART_REG_LSR_RT2880 0x1c |
| |
| static __iomem void *uart_membase = (__iomem void *) KSEG1ADDR(EARLY_UART_BASE); |
| static __iomem void *chipid_membase = (__iomem void *) KSEG1ADDR(CHIPID_BASE); |
| static int init_complete; |
| |
| static inline void uart_w32(u32 val, unsigned reg) |
| { |
| __raw_writel(val, uart_membase + reg); |
| } |
| |
| static inline u32 uart_r32(unsigned reg) |
| { |
| return __raw_readl(uart_membase + reg); |
| } |
| |
| static inline int soc_is_mt7628(void) |
| { |
| return IS_ENABLED(CONFIG_SOC_MT7620) && |
| (__raw_readl(chipid_membase) == MT7628_CHIP_NAME1); |
| } |
| |
| static void find_uart_base(void) |
| { |
| int i; |
| |
| if (!soc_is_mt7628()) |
| return; |
| |
| for (i = 0; i < 3; i++) { |
| u32 reg = uart_r32(UART_REG_LCR + (0x100 * i)); |
| |
| if (!reg) |
| continue; |
| |
| uart_membase = (__iomem void *) KSEG1ADDR(EARLY_UART_BASE + |
| (0x100 * i)); |
| break; |
| } |
| } |
| |
| void prom_putchar(char ch) |
| { |
| if (!init_complete) { |
| find_uart_base(); |
| init_complete = 1; |
| } |
| |
| if (IS_ENABLED(CONFIG_SOC_MT7621) || soc_is_mt7628()) { |
| uart_w32((unsigned char)ch, UART_TX); |
| while ((uart_r32(UART_REG_LSR) & UART_LSR_THRE) == 0) |
| ; |
| } else { |
| while ((uart_r32(UART_REG_LSR_RT2880) & UART_LSR_THRE) == 0) |
| ; |
| uart_w32((unsigned char)ch, UART_REG_TX); |
| while ((uart_r32(UART_REG_LSR_RT2880) & UART_LSR_THRE) == 0) |
| ; |
| } |
| } |