| /* |
| * linux/arch/arm/mach-omap1/clock.c |
| * |
| * Copyright (C) 2004 - 2005, 2009-2010 Nokia Corporation |
| * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com> |
| * |
| * Modified to use omap shared clock framework by |
| * Tony Lindgren <tony@atomide.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| #include <linux/kernel.h> |
| #include <linux/export.h> |
| #include <linux/list.h> |
| #include <linux/errno.h> |
| #include <linux/err.h> |
| #include <linux/io.h> |
| #include <linux/clk.h> |
| #include <linux/clkdev.h> |
| |
| #include <asm/mach-types.h> |
| |
| #include <mach/hardware.h> |
| |
| #include "soc.h" |
| #include "iomap.h" |
| #include "clock.h" |
| #include "opp.h" |
| #include "sram.h" |
| |
| __u32 arm_idlect1_mask; |
| struct clk *api_ck_p, *ck_dpll1_p, *ck_ref_p; |
| |
| static LIST_HEAD(clocks); |
| static DEFINE_MUTEX(clocks_mutex); |
| static DEFINE_SPINLOCK(clockfw_lock); |
| |
| /* |
| * Omap1 specific clock functions |
| */ |
| |
| unsigned long omap1_uart_recalc(struct clk *clk) |
| { |
| unsigned int val = __raw_readl(clk->enable_reg); |
| return val & clk->enable_bit ? 48000000 : 12000000; |
| } |
| |
| unsigned long omap1_sossi_recalc(struct clk *clk) |
| { |
| u32 div = omap_readl(MOD_CONF_CTRL_1); |
| |
| div = (div >> 17) & 0x7; |
| div++; |
| |
| return clk->parent->rate / div; |
| } |
| |
| static void omap1_clk_allow_idle(struct clk *clk) |
| { |
| struct arm_idlect1_clk * iclk = (struct arm_idlect1_clk *)clk; |
| |
| if (!(clk->flags & CLOCK_IDLE_CONTROL)) |
| return; |
| |
| if (iclk->no_idle_count > 0 && !(--iclk->no_idle_count)) |
| arm_idlect1_mask |= 1 << iclk->idlect_shift; |
| } |
| |
| static void omap1_clk_deny_idle(struct clk *clk) |
| { |
| struct arm_idlect1_clk * iclk = (struct arm_idlect1_clk *)clk; |
| |
| if (!(clk->flags & CLOCK_IDLE_CONTROL)) |
| return; |
| |
| if (iclk->no_idle_count++ == 0) |
| arm_idlect1_mask &= ~(1 << iclk->idlect_shift); |
| } |
| |
| static __u16 verify_ckctl_value(__u16 newval) |
| { |
| /* This function checks for following limitations set |
| * by the hardware (all conditions must be true): |
| * DSPMMU_CK == DSP_CK or DSPMMU_CK == DSP_CK/2 |
| * ARM_CK >= TC_CK |
| * DSP_CK >= TC_CK |
| * DSPMMU_CK >= TC_CK |
| * |
| * In addition following rules are enforced: |
| * LCD_CK <= TC_CK |
| * ARMPER_CK <= TC_CK |
| * |
| * However, maximum frequencies are not checked for! |
| */ |
| __u8 per_exp; |
| __u8 lcd_exp; |
| __u8 arm_exp; |
| __u8 dsp_exp; |
| __u8 tc_exp; |
| __u8 dspmmu_exp; |
| |
| per_exp = (newval >> CKCTL_PERDIV_OFFSET) & 3; |
| lcd_exp = (newval >> CKCTL_LCDDIV_OFFSET) & 3; |
| arm_exp = (newval >> CKCTL_ARMDIV_OFFSET) & 3; |
| dsp_exp = (newval >> CKCTL_DSPDIV_OFFSET) & 3; |
| tc_exp = (newval >> CKCTL_TCDIV_OFFSET) & 3; |
| dspmmu_exp = (newval >> CKCTL_DSPMMUDIV_OFFSET) & 3; |
| |
| if (dspmmu_exp < dsp_exp) |
| dspmmu_exp = dsp_exp; |
| if (dspmmu_exp > dsp_exp+1) |
| dspmmu_exp = dsp_exp+1; |
| if (tc_exp < arm_exp) |
| tc_exp = arm_exp; |
| if (tc_exp < dspmmu_exp) |
| tc_exp = dspmmu_exp; |
| if (tc_exp > lcd_exp) |
| lcd_exp = tc_exp; |
| if (tc_exp > per_exp) |
| per_exp = tc_exp; |
| |
| newval &= 0xf000; |
| newval |= per_exp << CKCTL_PERDIV_OFFSET; |
| newval |= lcd_exp << CKCTL_LCDDIV_OFFSET; |
| newval |= arm_exp << CKCTL_ARMDIV_OFFSET; |
| newval |= dsp_exp << CKCTL_DSPDIV_OFFSET; |
| newval |= tc_exp << CKCTL_TCDIV_OFFSET; |
| newval |= dspmmu_exp << CKCTL_DSPMMUDIV_OFFSET; |
| |
| return newval; |
| } |
| |
| static int calc_dsor_exp(struct clk *clk, unsigned long rate) |
| { |
| /* Note: If target frequency is too low, this function will return 4, |
| * which is invalid value. Caller must check for this value and act |
| * accordingly. |
| * |
| * Note: This function does not check for following limitations set |
| * by the hardware (all conditions must be true): |
| * DSPMMU_CK == DSP_CK or DSPMMU_CK == DSP_CK/2 |
| * ARM_CK >= TC_CK |
| * DSP_CK >= TC_CK |
| * DSPMMU_CK >= TC_CK |
| */ |
| unsigned long realrate; |
| struct clk * parent; |
| unsigned dsor_exp; |
| |
| parent = clk->parent; |
| if (unlikely(parent == NULL)) |
| return -EIO; |
| |
| realrate = parent->rate; |
| for (dsor_exp=0; dsor_exp<4; dsor_exp++) { |
| if (realrate <= rate) |
| break; |
| |
| realrate /= 2; |
| } |
| |
| return dsor_exp; |
| } |
| |
| unsigned long omap1_ckctl_recalc(struct clk *clk) |
| { |
| /* Calculate divisor encoded as 2-bit exponent */ |
| int dsor = 1 << (3 & (omap_readw(ARM_CKCTL) >> clk->rate_offset)); |
| |
| return clk->parent->rate / dsor; |
| } |
| |
| unsigned long omap1_ckctl_recalc_dsp_domain(struct clk *clk) |
| { |
| int dsor; |
| |
| /* Calculate divisor encoded as 2-bit exponent |
| * |
| * The clock control bits are in DSP domain, |
| * so api_ck is needed for access. |
| * Note that DSP_CKCTL virt addr = phys addr, so |
| * we must use __raw_readw() instead of omap_readw(). |
| */ |
| omap1_clk_enable(api_ck_p); |
| dsor = 1 << (3 & (__raw_readw(DSP_CKCTL) >> clk->rate_offset)); |
| omap1_clk_disable(api_ck_p); |
| |
| return clk->parent->rate / dsor; |
| } |
| |
| /* MPU virtual clock functions */ |
| int omap1_select_table_rate(struct clk *clk, unsigned long rate) |
| { |
| /* Find the highest supported frequency <= rate and switch to it */ |
| struct mpu_rate * ptr; |
| unsigned long ref_rate; |
| |
| ref_rate = ck_ref_p->rate; |
| |
| for (ptr = omap1_rate_table; ptr->rate; ptr++) { |
| if (!(ptr->flags & cpu_mask)) |
| continue; |
| |
| if (ptr->xtal != ref_rate) |
| continue; |
| |
| /* Can check only after xtal frequency check */ |
| if (ptr->rate <= rate) |
| break; |
| } |
| |
| if (!ptr->rate) |
| return -EINVAL; |
| |
| /* |
| * In most cases we should not need to reprogram DPLL. |
| * Reprogramming the DPLL is tricky, it must be done from SRAM. |
| */ |
| omap_sram_reprogram_clock(ptr->dpllctl_val, ptr->ckctl_val); |
| |
| /* XXX Do we need to recalculate the tree below DPLL1 at this point? */ |
| ck_dpll1_p->rate = ptr->pll_rate; |
| |
| return 0; |
| } |
| |
| int omap1_clk_set_rate_dsp_domain(struct clk *clk, unsigned long rate) |
| { |
| int dsor_exp; |
| u16 regval; |
| |
| dsor_exp = calc_dsor_exp(clk, rate); |
| if (dsor_exp > 3) |
| dsor_exp = -EINVAL; |
| if (dsor_exp < 0) |
| return dsor_exp; |
| |
| regval = __raw_readw(DSP_CKCTL); |
| regval &= ~(3 << clk->rate_offset); |
| regval |= dsor_exp << clk->rate_offset; |
| __raw_writew(regval, DSP_CKCTL); |
| clk->rate = clk->parent->rate / (1 << dsor_exp); |
| |
| return 0; |
| } |
| |
| long omap1_clk_round_rate_ckctl_arm(struct clk *clk, unsigned long rate) |
| { |
| int dsor_exp = calc_dsor_exp(clk, rate); |
| if (dsor_exp < 0) |
| return dsor_exp; |
| if (dsor_exp > 3) |
| dsor_exp = 3; |
| return clk->parent->rate / (1 << dsor_exp); |
| } |
| |
| int omap1_clk_set_rate_ckctl_arm(struct clk *clk, unsigned long rate) |
| { |
| int dsor_exp; |
| u16 regval; |
| |
| dsor_exp = calc_dsor_exp(clk, rate); |
| if (dsor_exp > 3) |
| dsor_exp = -EINVAL; |
| if (dsor_exp < 0) |
| return dsor_exp; |
| |
| regval = omap_readw(ARM_CKCTL); |
| regval &= ~(3 << clk->rate_offset); |
| regval |= dsor_exp << clk->rate_offset; |
| regval = verify_ckctl_value(regval); |
| omap_writew(regval, ARM_CKCTL); |
| clk->rate = clk->parent->rate / (1 << dsor_exp); |
| return 0; |
| } |
| |
| long omap1_round_to_table_rate(struct clk *clk, unsigned long rate) |
| { |
| /* Find the highest supported frequency <= rate */ |
| struct mpu_rate * ptr; |
| long highest_rate; |
| unsigned long ref_rate; |
| |
| ref_rate = ck_ref_p->rate; |
| |
| highest_rate = -EINVAL; |
| |
| for (ptr = omap1_rate_table; ptr->rate; ptr++) { |
| if (!(ptr->flags & cpu_mask)) |
| continue; |
| |
| if (ptr->xtal != ref_rate) |
| continue; |
| |
| highest_rate = ptr->rate; |
| |
| /* Can check only after xtal frequency check */ |
| if (ptr->rate <= rate) |
| break; |
| } |
| |
| return highest_rate; |
| } |
| |
| static unsigned calc_ext_dsor(unsigned long rate) |
| { |
| unsigned dsor; |
| |
| /* MCLK and BCLK divisor selection is not linear: |
| * freq = 96MHz / dsor |
| * |
| * RATIO_SEL range: dsor <-> RATIO_SEL |
| * 0..6: (RATIO_SEL+2) <-> (dsor-2) |
| * 6..48: (8+(RATIO_SEL-6)*2) <-> ((dsor-8)/2+6) |
| * Minimum dsor is 2 and maximum is 96. Odd divisors starting from 9 |
| * can not be used. |
| */ |
| for (dsor = 2; dsor < 96; ++dsor) { |
| if ((dsor & 1) && dsor > 8) |
| continue; |
| if (rate >= 96000000 / dsor) |
| break; |
| } |
| return dsor; |
| } |
| |
| /* XXX Only needed on 1510 */ |
| int omap1_set_uart_rate(struct clk *clk, unsigned long rate) |
| { |
| unsigned int val; |
| |
| val = __raw_readl(clk->enable_reg); |
| if (rate == 12000000) |
| val &= ~(1 << clk->enable_bit); |
| else if (rate == 48000000) |
| val |= (1 << clk->enable_bit); |
| else |
| return -EINVAL; |
| __raw_writel(val, clk->enable_reg); |
| clk->rate = rate; |
| |
| return 0; |
| } |
| |
| /* External clock (MCLK & BCLK) functions */ |
| int omap1_set_ext_clk_rate(struct clk *clk, unsigned long rate) |
| { |
| unsigned dsor; |
| __u16 ratio_bits; |
| |
| dsor = calc_ext_dsor(rate); |
| clk->rate = 96000000 / dsor; |
| if (dsor > 8) |
| ratio_bits = ((dsor - 8) / 2 + 6) << 2; |
| else |
| ratio_bits = (dsor - 2) << 2; |
| |
| ratio_bits |= __raw_readw(clk->enable_reg) & ~0xfd; |
| __raw_writew(ratio_bits, clk->enable_reg); |
| |
| return 0; |
| } |
| |
| int omap1_set_sossi_rate(struct clk *clk, unsigned long rate) |
| { |
| u32 l; |
| int div; |
| unsigned long p_rate; |
| |
| p_rate = clk->parent->rate; |
| /* Round towards slower frequency */ |
| div = (p_rate + rate - 1) / rate; |
| div--; |
| if (div < 0 || div > 7) |
| return -EINVAL; |
| |
| l = omap_readl(MOD_CONF_CTRL_1); |
| l &= ~(7 << 17); |
| l |= div << 17; |
| omap_writel(l, MOD_CONF_CTRL_1); |
| |
| clk->rate = p_rate / (div + 1); |
| |
| return 0; |
| } |
| |
| long omap1_round_ext_clk_rate(struct clk *clk, unsigned long rate) |
| { |
| return 96000000 / calc_ext_dsor(rate); |
| } |
| |
| void omap1_init_ext_clk(struct clk *clk) |
| { |
| unsigned dsor; |
| __u16 ratio_bits; |
| |
| /* Determine current rate and ensure clock is based on 96MHz APLL */ |
| ratio_bits = __raw_readw(clk->enable_reg) & ~1; |
| __raw_writew(ratio_bits, clk->enable_reg); |
| |
| ratio_bits = (ratio_bits & 0xfc) >> 2; |
| if (ratio_bits > 6) |
| dsor = (ratio_bits - 6) * 2 + 8; |
| else |
| dsor = ratio_bits + 2; |
| |
| clk-> rate = 96000000 / dsor; |
| } |
| |
| int omap1_clk_enable(struct clk *clk) |
| { |
| int ret = 0; |
| |
| if (clk->usecount++ == 0) { |
| if (clk->parent) { |
| ret = omap1_clk_enable(clk->parent); |
| if (ret) |
| goto err; |
| |
| if (clk->flags & CLOCK_NO_IDLE_PARENT) |
| omap1_clk_deny_idle(clk->parent); |
| } |
| |
| ret = clk->ops->enable(clk); |
| if (ret) { |
| if (clk->parent) |
| omap1_clk_disable(clk->parent); |
| goto err; |
| } |
| } |
| return ret; |
| |
| err: |
| clk->usecount--; |
| return ret; |
| } |
| |
| void omap1_clk_disable(struct clk *clk) |
| { |
| if (clk->usecount > 0 && !(--clk->usecount)) { |
| clk->ops->disable(clk); |
| if (likely(clk->parent)) { |
| omap1_clk_disable(clk->parent); |
| if (clk->flags & CLOCK_NO_IDLE_PARENT) |
| omap1_clk_allow_idle(clk->parent); |
| } |
| } |
| } |
| |
| static int omap1_clk_enable_generic(struct clk *clk) |
| { |
| __u16 regval16; |
| __u32 regval32; |
| |
| if (unlikely(clk->enable_reg == NULL)) { |
| printk(KERN_ERR "clock.c: Enable for %s without enable code\n", |
| clk->name); |
| return -EINVAL; |
| } |
| |
| if (clk->flags & ENABLE_REG_32BIT) { |
| regval32 = __raw_readl(clk->enable_reg); |
| regval32 |= (1 << clk->enable_bit); |
| __raw_writel(regval32, clk->enable_reg); |
| } else { |
| regval16 = __raw_readw(clk->enable_reg); |
| regval16 |= (1 << clk->enable_bit); |
| __raw_writew(regval16, clk->enable_reg); |
| } |
| |
| return 0; |
| } |
| |
| static void omap1_clk_disable_generic(struct clk *clk) |
| { |
| __u16 regval16; |
| __u32 regval32; |
| |
| if (clk->enable_reg == NULL) |
| return; |
| |
| if (clk->flags & ENABLE_REG_32BIT) { |
| regval32 = __raw_readl(clk->enable_reg); |
| regval32 &= ~(1 << clk->enable_bit); |
| __raw_writel(regval32, clk->enable_reg); |
| } else { |
| regval16 = __raw_readw(clk->enable_reg); |
| regval16 &= ~(1 << clk->enable_bit); |
| __raw_writew(regval16, clk->enable_reg); |
| } |
| } |
| |
| const struct clkops clkops_generic = { |
| .enable = omap1_clk_enable_generic, |
| .disable = omap1_clk_disable_generic, |
| }; |
| |
| static int omap1_clk_enable_dsp_domain(struct clk *clk) |
| { |
| int retval; |
| |
| retval = omap1_clk_enable(api_ck_p); |
| if (!retval) { |
| retval = omap1_clk_enable_generic(clk); |
| omap1_clk_disable(api_ck_p); |
| } |
| |
| return retval; |
| } |
| |
| static void omap1_clk_disable_dsp_domain(struct clk *clk) |
| { |
| if (omap1_clk_enable(api_ck_p) == 0) { |
| omap1_clk_disable_generic(clk); |
| omap1_clk_disable(api_ck_p); |
| } |
| } |
| |
| const struct clkops clkops_dspck = { |
| .enable = omap1_clk_enable_dsp_domain, |
| .disable = omap1_clk_disable_dsp_domain, |
| }; |
| |
| /* XXX SYSC register handling does not belong in the clock framework */ |
| static int omap1_clk_enable_uart_functional_16xx(struct clk *clk) |
| { |
| int ret; |
| struct uart_clk *uclk; |
| |
| ret = omap1_clk_enable_generic(clk); |
| if (ret == 0) { |
| /* Set smart idle acknowledgement mode */ |
| uclk = (struct uart_clk *)clk; |
| omap_writeb((omap_readb(uclk->sysc_addr) & ~0x10) | 8, |
| uclk->sysc_addr); |
| } |
| |
| return ret; |
| } |
| |
| /* XXX SYSC register handling does not belong in the clock framework */ |
| static void omap1_clk_disable_uart_functional_16xx(struct clk *clk) |
| { |
| struct uart_clk *uclk; |
| |
| /* Set force idle acknowledgement mode */ |
| uclk = (struct uart_clk *)clk; |
| omap_writeb((omap_readb(uclk->sysc_addr) & ~0x18), uclk->sysc_addr); |
| |
| omap1_clk_disable_generic(clk); |
| } |
| |
| /* XXX SYSC register handling does not belong in the clock framework */ |
| const struct clkops clkops_uart_16xx = { |
| .enable = omap1_clk_enable_uart_functional_16xx, |
| .disable = omap1_clk_disable_uart_functional_16xx, |
| }; |
| |
| long omap1_clk_round_rate(struct clk *clk, unsigned long rate) |
| { |
| if (clk->round_rate != NULL) |
| return clk->round_rate(clk, rate); |
| |
| return clk->rate; |
| } |
| |
| int omap1_clk_set_rate(struct clk *clk, unsigned long rate) |
| { |
| int ret = -EINVAL; |
| |
| if (clk->set_rate) |
| ret = clk->set_rate(clk, rate); |
| return ret; |
| } |
| |
| /* |
| * Omap1 clock reset and init functions |
| */ |
| |
| #ifdef CONFIG_OMAP_RESET_CLOCKS |
| |
| void omap1_clk_disable_unused(struct clk *clk) |
| { |
| __u32 regval32; |
| |
| /* Clocks in the DSP domain need api_ck. Just assume bootloader |
| * has not enabled any DSP clocks */ |
| if (clk->enable_reg == DSP_IDLECT2) { |
| pr_info("Skipping reset check for DSP domain clock \"%s\"\n", |
| clk->name); |
| return; |
| } |
| |
| /* Is the clock already disabled? */ |
| if (clk->flags & ENABLE_REG_32BIT) |
| regval32 = __raw_readl(clk->enable_reg); |
| else |
| regval32 = __raw_readw(clk->enable_reg); |
| |
| if ((regval32 & (1 << clk->enable_bit)) == 0) |
| return; |
| |
| printk(KERN_INFO "Disabling unused clock \"%s\"... ", clk->name); |
| clk->ops->disable(clk); |
| printk(" done\n"); |
| } |
| |
| #endif |
| |
| |
| int clk_enable(struct clk *clk) |
| { |
| unsigned long flags; |
| int ret; |
| |
| if (clk == NULL || IS_ERR(clk)) |
| return -EINVAL; |
| |
| spin_lock_irqsave(&clockfw_lock, flags); |
| ret = omap1_clk_enable(clk); |
| spin_unlock_irqrestore(&clockfw_lock, flags); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL(clk_enable); |
| |
| void clk_disable(struct clk *clk) |
| { |
| unsigned long flags; |
| |
| if (clk == NULL || IS_ERR(clk)) |
| return; |
| |
| spin_lock_irqsave(&clockfw_lock, flags); |
| if (clk->usecount == 0) { |
| pr_err("Trying disable clock %s with 0 usecount\n", |
| clk->name); |
| WARN_ON(1); |
| goto out; |
| } |
| |
| omap1_clk_disable(clk); |
| |
| out: |
| spin_unlock_irqrestore(&clockfw_lock, flags); |
| } |
| EXPORT_SYMBOL(clk_disable); |
| |
| unsigned long clk_get_rate(struct clk *clk) |
| { |
| unsigned long flags; |
| unsigned long ret; |
| |
| if (clk == NULL || IS_ERR(clk)) |
| return 0; |
| |
| spin_lock_irqsave(&clockfw_lock, flags); |
| ret = clk->rate; |
| spin_unlock_irqrestore(&clockfw_lock, flags); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL(clk_get_rate); |
| |
| /* |
| * Optional clock functions defined in include/linux/clk.h |
| */ |
| |
| long clk_round_rate(struct clk *clk, unsigned long rate) |
| { |
| unsigned long flags; |
| long ret; |
| |
| if (clk == NULL || IS_ERR(clk)) |
| return 0; |
| |
| spin_lock_irqsave(&clockfw_lock, flags); |
| ret = omap1_clk_round_rate(clk, rate); |
| spin_unlock_irqrestore(&clockfw_lock, flags); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL(clk_round_rate); |
| |
| int clk_set_rate(struct clk *clk, unsigned long rate) |
| { |
| unsigned long flags; |
| int ret = -EINVAL; |
| |
| if (clk == NULL || IS_ERR(clk)) |
| return ret; |
| |
| spin_lock_irqsave(&clockfw_lock, flags); |
| ret = omap1_clk_set_rate(clk, rate); |
| if (ret == 0) |
| propagate_rate(clk); |
| spin_unlock_irqrestore(&clockfw_lock, flags); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL(clk_set_rate); |
| |
| int clk_set_parent(struct clk *clk, struct clk *parent) |
| { |
| WARN_ONCE(1, "clk_set_parent() not implemented for OMAP1\n"); |
| |
| return -EINVAL; |
| } |
| EXPORT_SYMBOL(clk_set_parent); |
| |
| struct clk *clk_get_parent(struct clk *clk) |
| { |
| return clk->parent; |
| } |
| EXPORT_SYMBOL(clk_get_parent); |
| |
| /* |
| * OMAP specific clock functions shared between omap1 and omap2 |
| */ |
| |
| /* Used for clocks that always have same value as the parent clock */ |
| unsigned long followparent_recalc(struct clk *clk) |
| { |
| return clk->parent->rate; |
| } |
| |
| /* |
| * Used for clocks that have the same value as the parent clock, |
| * divided by some factor |
| */ |
| unsigned long omap_fixed_divisor_recalc(struct clk *clk) |
| { |
| WARN_ON(!clk->fixed_div); |
| |
| return clk->parent->rate / clk->fixed_div; |
| } |
| |
| void clk_reparent(struct clk *child, struct clk *parent) |
| { |
| list_del_init(&child->sibling); |
| if (parent) |
| list_add(&child->sibling, &parent->children); |
| child->parent = parent; |
| |
| /* now do the debugfs renaming to reattach the child |
| to the proper parent */ |
| } |
| |
| /* Propagate rate to children */ |
| void propagate_rate(struct clk *tclk) |
| { |
| struct clk *clkp; |
| |
| list_for_each_entry(clkp, &tclk->children, sibling) { |
| if (clkp->recalc) |
| clkp->rate = clkp->recalc(clkp); |
| propagate_rate(clkp); |
| } |
| } |
| |
| static LIST_HEAD(root_clks); |
| |
| /** |
| * recalculate_root_clocks - recalculate and propagate all root clocks |
| * |
| * Recalculates all root clocks (clocks with no parent), which if the |
| * clock's .recalc is set correctly, should also propagate their rates. |
| * Called at init. |
| */ |
| void recalculate_root_clocks(void) |
| { |
| struct clk *clkp; |
| |
| list_for_each_entry(clkp, &root_clks, sibling) { |
| if (clkp->recalc) |
| clkp->rate = clkp->recalc(clkp); |
| propagate_rate(clkp); |
| } |
| } |
| |
| /** |
| * clk_preinit - initialize any fields in the struct clk before clk init |
| * @clk: struct clk * to initialize |
| * |
| * Initialize any struct clk fields needed before normal clk initialization |
| * can run. No return value. |
| */ |
| void clk_preinit(struct clk *clk) |
| { |
| INIT_LIST_HEAD(&clk->children); |
| } |
| |
| int clk_register(struct clk *clk) |
| { |
| if (clk == NULL || IS_ERR(clk)) |
| return -EINVAL; |
| |
| /* |
| * trap out already registered clocks |
| */ |
| if (clk->node.next || clk->node.prev) |
| return 0; |
| |
| mutex_lock(&clocks_mutex); |
| if (clk->parent) |
| list_add(&clk->sibling, &clk->parent->children); |
| else |
| list_add(&clk->sibling, &root_clks); |
| |
| list_add(&clk->node, &clocks); |
| if (clk->init) |
| clk->init(clk); |
| mutex_unlock(&clocks_mutex); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(clk_register); |
| |
| void clk_unregister(struct clk *clk) |
| { |
| if (clk == NULL || IS_ERR(clk)) |
| return; |
| |
| mutex_lock(&clocks_mutex); |
| list_del(&clk->sibling); |
| list_del(&clk->node); |
| mutex_unlock(&clocks_mutex); |
| } |
| EXPORT_SYMBOL(clk_unregister); |
| |
| void clk_enable_init_clocks(void) |
| { |
| struct clk *clkp; |
| |
| list_for_each_entry(clkp, &clocks, node) |
| if (clkp->flags & ENABLE_ON_INIT) |
| clk_enable(clkp); |
| } |
| |
| /** |
| * omap_clk_get_by_name - locate OMAP struct clk by its name |
| * @name: name of the struct clk to locate |
| * |
| * Locate an OMAP struct clk by its name. Assumes that struct clk |
| * names are unique. Returns NULL if not found or a pointer to the |
| * struct clk if found. |
| */ |
| struct clk *omap_clk_get_by_name(const char *name) |
| { |
| struct clk *c; |
| struct clk *ret = NULL; |
| |
| mutex_lock(&clocks_mutex); |
| |
| list_for_each_entry(c, &clocks, node) { |
| if (!strcmp(c->name, name)) { |
| ret = c; |
| break; |
| } |
| } |
| |
| mutex_unlock(&clocks_mutex); |
| |
| return ret; |
| } |
| |
| int omap_clk_enable_autoidle_all(void) |
| { |
| struct clk *c; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&clockfw_lock, flags); |
| |
| list_for_each_entry(c, &clocks, node) |
| if (c->ops->allow_idle) |
| c->ops->allow_idle(c); |
| |
| spin_unlock_irqrestore(&clockfw_lock, flags); |
| |
| return 0; |
| } |
| |
| int omap_clk_disable_autoidle_all(void) |
| { |
| struct clk *c; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&clockfw_lock, flags); |
| |
| list_for_each_entry(c, &clocks, node) |
| if (c->ops->deny_idle) |
| c->ops->deny_idle(c); |
| |
| spin_unlock_irqrestore(&clockfw_lock, flags); |
| |
| return 0; |
| } |
| |
| /* |
| * Low level helpers |
| */ |
| static int clkll_enable_null(struct clk *clk) |
| { |
| return 0; |
| } |
| |
| static void clkll_disable_null(struct clk *clk) |
| { |
| } |
| |
| const struct clkops clkops_null = { |
| .enable = clkll_enable_null, |
| .disable = clkll_disable_null, |
| }; |
| |
| /* |
| * Dummy clock |
| * |
| * Used for clock aliases that are needed on some OMAPs, but not others |
| */ |
| struct clk dummy_ck = { |
| .name = "dummy", |
| .ops = &clkops_null, |
| }; |
| |
| /* |
| * |
| */ |
| |
| #ifdef CONFIG_OMAP_RESET_CLOCKS |
| /* |
| * Disable any unused clocks left on by the bootloader |
| */ |
| static int __init clk_disable_unused(void) |
| { |
| struct clk *ck; |
| unsigned long flags; |
| |
| pr_info("clock: disabling unused clocks to save power\n"); |
| |
| spin_lock_irqsave(&clockfw_lock, flags); |
| list_for_each_entry(ck, &clocks, node) { |
| if (ck->ops == &clkops_null) |
| continue; |
| |
| if (ck->usecount > 0 || !ck->enable_reg) |
| continue; |
| |
| omap1_clk_disable_unused(ck); |
| } |
| spin_unlock_irqrestore(&clockfw_lock, flags); |
| |
| return 0; |
| } |
| late_initcall(clk_disable_unused); |
| late_initcall(omap_clk_enable_autoidle_all); |
| #endif |
| |
| #if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) |
| /* |
| * debugfs support to trace clock tree hierarchy and attributes |
| */ |
| |
| #include <linux/debugfs.h> |
| #include <linux/seq_file.h> |
| |
| static struct dentry *clk_debugfs_root; |
| |
| static int clk_dbg_show_summary(struct seq_file *s, void *unused) |
| { |
| struct clk *c; |
| struct clk *pa; |
| |
| mutex_lock(&clocks_mutex); |
| seq_printf(s, "%-30s %-30s %-10s %s\n", |
| "clock-name", "parent-name", "rate", "use-count"); |
| |
| list_for_each_entry(c, &clocks, node) { |
| pa = c->parent; |
| seq_printf(s, "%-30s %-30s %-10lu %d\n", |
| c->name, pa ? pa->name : "none", c->rate, |
| c->usecount); |
| } |
| mutex_unlock(&clocks_mutex); |
| |
| return 0; |
| } |
| |
| static int clk_dbg_open(struct inode *inode, struct file *file) |
| { |
| return single_open(file, clk_dbg_show_summary, inode->i_private); |
| } |
| |
| static const struct file_operations debug_clock_fops = { |
| .open = clk_dbg_open, |
| .read = seq_read, |
| .llseek = seq_lseek, |
| .release = single_release, |
| }; |
| |
| static int clk_debugfs_register_one(struct clk *c) |
| { |
| int err; |
| struct dentry *d; |
| struct clk *pa = c->parent; |
| |
| d = debugfs_create_dir(c->name, pa ? pa->dent : clk_debugfs_root); |
| if (!d) |
| return -ENOMEM; |
| c->dent = d; |
| |
| d = debugfs_create_u8("usecount", S_IRUGO, c->dent, &c->usecount); |
| if (!d) { |
| err = -ENOMEM; |
| goto err_out; |
| } |
| d = debugfs_create_ulong("rate", S_IRUGO, c->dent, &c->rate); |
| if (!d) { |
| err = -ENOMEM; |
| goto err_out; |
| } |
| d = debugfs_create_x8("flags", S_IRUGO, c->dent, &c->flags); |
| if (!d) { |
| err = -ENOMEM; |
| goto err_out; |
| } |
| return 0; |
| |
| err_out: |
| debugfs_remove_recursive(c->dent); |
| return err; |
| } |
| |
| static int clk_debugfs_register(struct clk *c) |
| { |
| int err; |
| struct clk *pa = c->parent; |
| |
| if (pa && !pa->dent) { |
| err = clk_debugfs_register(pa); |
| if (err) |
| return err; |
| } |
| |
| if (!c->dent) { |
| err = clk_debugfs_register_one(c); |
| if (err) |
| return err; |
| } |
| return 0; |
| } |
| |
| static int __init clk_debugfs_init(void) |
| { |
| struct clk *c; |
| struct dentry *d; |
| int err; |
| |
| d = debugfs_create_dir("clock", NULL); |
| if (!d) |
| return -ENOMEM; |
| clk_debugfs_root = d; |
| |
| list_for_each_entry(c, &clocks, node) { |
| err = clk_debugfs_register(c); |
| if (err) |
| goto err_out; |
| } |
| |
| d = debugfs_create_file("summary", S_IRUGO, |
| d, NULL, &debug_clock_fops); |
| if (!d) |
| return -ENOMEM; |
| |
| return 0; |
| err_out: |
| debugfs_remove_recursive(clk_debugfs_root); |
| return err; |
| } |
| late_initcall(clk_debugfs_init); |
| |
| #endif /* defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) */ |