| /* |
| * numaq_32.c - Low-level PCI access for NUMA-Q machines |
| */ |
| |
| #include <linux/pci.h> |
| #include <linux/init.h> |
| #include <linux/nodemask.h> |
| #include <asm/apic.h> |
| #include <asm/mpspec.h> |
| #include <asm/pci_x86.h> |
| #include <asm/numaq.h> |
| |
| #define BUS2QUAD(global) (mp_bus_id_to_node[global]) |
| |
| #define BUS2LOCAL(global) (mp_bus_id_to_local[global]) |
| |
| #define QUADLOCAL2BUS(quad,local) (quad_local_to_mp_bus_id[quad][local]) |
| |
| #define PCI_CONF1_MQ_ADDRESS(bus, devfn, reg) \ |
| (0x80000000 | (BUS2LOCAL(bus) << 16) | (devfn << 8) | (reg & ~3)) |
| |
| static void write_cf8(unsigned bus, unsigned devfn, unsigned reg) |
| { |
| unsigned val = PCI_CONF1_MQ_ADDRESS(bus, devfn, reg); |
| if (xquad_portio) |
| writel(val, XQUAD_PORT_ADDR(0xcf8, BUS2QUAD(bus))); |
| else |
| outl(val, 0xCF8); |
| } |
| |
| static int pci_conf1_mq_read(unsigned int seg, unsigned int bus, |
| unsigned int devfn, int reg, int len, u32 *value) |
| { |
| unsigned long flags; |
| void *adr __iomem = XQUAD_PORT_ADDR(0xcfc, BUS2QUAD(bus)); |
| |
| WARN_ON(seg); |
| if (!value || (bus >= MAX_MP_BUSSES) || (devfn > 255) || (reg > 255)) |
| return -EINVAL; |
| |
| raw_spin_lock_irqsave(&pci_config_lock, flags); |
| |
| write_cf8(bus, devfn, reg); |
| |
| switch (len) { |
| case 1: |
| if (xquad_portio) |
| *value = readb(adr + (reg & 3)); |
| else |
| *value = inb(0xCFC + (reg & 3)); |
| break; |
| case 2: |
| if (xquad_portio) |
| *value = readw(adr + (reg & 2)); |
| else |
| *value = inw(0xCFC + (reg & 2)); |
| break; |
| case 4: |
| if (xquad_portio) |
| *value = readl(adr); |
| else |
| *value = inl(0xCFC); |
| break; |
| } |
| |
| raw_spin_unlock_irqrestore(&pci_config_lock, flags); |
| |
| return 0; |
| } |
| |
| static int pci_conf1_mq_write(unsigned int seg, unsigned int bus, |
| unsigned int devfn, int reg, int len, u32 value) |
| { |
| unsigned long flags; |
| void *adr __iomem = XQUAD_PORT_ADDR(0xcfc, BUS2QUAD(bus)); |
| |
| WARN_ON(seg); |
| if ((bus >= MAX_MP_BUSSES) || (devfn > 255) || (reg > 255)) |
| return -EINVAL; |
| |
| raw_spin_lock_irqsave(&pci_config_lock, flags); |
| |
| write_cf8(bus, devfn, reg); |
| |
| switch (len) { |
| case 1: |
| if (xquad_portio) |
| writeb(value, adr + (reg & 3)); |
| else |
| outb((u8)value, 0xCFC + (reg & 3)); |
| break; |
| case 2: |
| if (xquad_portio) |
| writew(value, adr + (reg & 2)); |
| else |
| outw((u16)value, 0xCFC + (reg & 2)); |
| break; |
| case 4: |
| if (xquad_portio) |
| writel(value, adr + reg); |
| else |
| outl((u32)value, 0xCFC); |
| break; |
| } |
| |
| raw_spin_unlock_irqrestore(&pci_config_lock, flags); |
| |
| return 0; |
| } |
| |
| #undef PCI_CONF1_MQ_ADDRESS |
| |
| static struct pci_raw_ops pci_direct_conf1_mq = { |
| .read = pci_conf1_mq_read, |
| .write = pci_conf1_mq_write |
| }; |
| |
| |
| static void __devinit pci_fixup_i450nx(struct pci_dev *d) |
| { |
| /* |
| * i450NX -- Find and scan all secondary buses on all PXB's. |
| */ |
| int pxb, reg; |
| u8 busno, suba, subb; |
| int quad = BUS2QUAD(d->bus->number); |
| |
| dev_info(&d->dev, "searching for i450NX host bridges\n"); |
| reg = 0xd0; |
| for(pxb=0; pxb<2; pxb++) { |
| pci_read_config_byte(d, reg++, &busno); |
| pci_read_config_byte(d, reg++, &suba); |
| pci_read_config_byte(d, reg++, &subb); |
| dev_dbg(&d->dev, "i450NX PXB %d: %02x/%02x/%02x\n", |
| pxb, busno, suba, subb); |
| if (busno) { |
| /* Bus A */ |
| pci_scan_bus_with_sysdata(QUADLOCAL2BUS(quad, busno)); |
| } |
| if (suba < subb) { |
| /* Bus B */ |
| pci_scan_bus_with_sysdata(QUADLOCAL2BUS(quad, suba+1)); |
| } |
| } |
| pcibios_last_bus = -1; |
| } |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82451NX, pci_fixup_i450nx); |
| |
| int __init pci_numaq_init(void) |
| { |
| int quad; |
| |
| raw_pci_ops = &pci_direct_conf1_mq; |
| |
| pci_root_bus = pcibios_scan_root(0); |
| if (pci_root_bus) |
| pci_bus_add_devices(pci_root_bus); |
| if (num_online_nodes() > 1) |
| for_each_online_node(quad) { |
| if (quad == 0) |
| continue; |
| printk("Scanning PCI bus %d for quad %d\n", |
| QUADLOCAL2BUS(quad,0), quad); |
| pci_scan_bus_with_sysdata(QUADLOCAL2BUS(quad, 0)); |
| } |
| return 0; |
| } |