| /* | 
 |  * Copyright (C) 2005 - 2016 Broadcom | 
 |  * All rights reserved. | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or | 
 |  * modify it under the terms of the GNU General Public License version 2 | 
 |  * as published by the Free Software Foundation.  The full GNU General | 
 |  * Public License is included in this distribution in the file called COPYING. | 
 |  * | 
 |  * Contact Information: | 
 |  * linux-drivers@emulex.com | 
 |  * | 
 |  * Emulex | 
 |  * 3333 Susan Street | 
 |  * Costa Mesa, CA 92626 | 
 |  */ | 
 |  | 
 | #include <linux/prefetch.h> | 
 | #include <linux/module.h> | 
 | #include "be.h" | 
 | #include "be_cmds.h" | 
 | #include <asm/div64.h> | 
 | #include <linux/aer.h> | 
 | #include <linux/if_bridge.h> | 
 | #include <net/busy_poll.h> | 
 | #include <net/vxlan.h> | 
 |  | 
 | MODULE_VERSION(DRV_VER); | 
 | MODULE_DESCRIPTION(DRV_DESC " " DRV_VER); | 
 | MODULE_AUTHOR("Emulex Corporation"); | 
 | MODULE_LICENSE("GPL"); | 
 |  | 
 | /* num_vfs module param is obsolete. | 
 |  * Use sysfs method to enable/disable VFs. | 
 |  */ | 
 | static unsigned int num_vfs; | 
 | module_param(num_vfs, uint, 0444); | 
 | MODULE_PARM_DESC(num_vfs, "Number of PCI VFs to initialize"); | 
 |  | 
 | static ushort rx_frag_size = 2048; | 
 | module_param(rx_frag_size, ushort, 0444); | 
 | MODULE_PARM_DESC(rx_frag_size, "Size of a fragment that holds rcvd data."); | 
 |  | 
 | /* Per-module error detection/recovery workq shared across all functions. | 
 |  * Each function schedules its own work request on this shared workq. | 
 |  */ | 
 | static struct workqueue_struct *be_err_recovery_workq; | 
 |  | 
 | static const struct pci_device_id be_dev_ids[] = { | 
 | 	{ PCI_DEVICE(BE_VENDOR_ID, BE_DEVICE_ID1) }, | 
 | 	{ PCI_DEVICE(BE_VENDOR_ID, BE_DEVICE_ID2) }, | 
 | 	{ PCI_DEVICE(BE_VENDOR_ID, OC_DEVICE_ID1) }, | 
 | 	{ PCI_DEVICE(BE_VENDOR_ID, OC_DEVICE_ID2) }, | 
 | 	{ PCI_DEVICE(EMULEX_VENDOR_ID, OC_DEVICE_ID3)}, | 
 | 	{ PCI_DEVICE(EMULEX_VENDOR_ID, OC_DEVICE_ID4)}, | 
 | 	{ PCI_DEVICE(EMULEX_VENDOR_ID, OC_DEVICE_ID5)}, | 
 | 	{ PCI_DEVICE(EMULEX_VENDOR_ID, OC_DEVICE_ID6)}, | 
 | 	{ 0 } | 
 | }; | 
 | MODULE_DEVICE_TABLE(pci, be_dev_ids); | 
 |  | 
 | /* Workqueue used by all functions for defering cmd calls to the adapter */ | 
 | static struct workqueue_struct *be_wq; | 
 |  | 
 | /* UE Status Low CSR */ | 
 | static const char * const ue_status_low_desc[] = { | 
 | 	"CEV", | 
 | 	"CTX", | 
 | 	"DBUF", | 
 | 	"ERX", | 
 | 	"Host", | 
 | 	"MPU", | 
 | 	"NDMA", | 
 | 	"PTC ", | 
 | 	"RDMA ", | 
 | 	"RXF ", | 
 | 	"RXIPS ", | 
 | 	"RXULP0 ", | 
 | 	"RXULP1 ", | 
 | 	"RXULP2 ", | 
 | 	"TIM ", | 
 | 	"TPOST ", | 
 | 	"TPRE ", | 
 | 	"TXIPS ", | 
 | 	"TXULP0 ", | 
 | 	"TXULP1 ", | 
 | 	"UC ", | 
 | 	"WDMA ", | 
 | 	"TXULP2 ", | 
 | 	"HOST1 ", | 
 | 	"P0_OB_LINK ", | 
 | 	"P1_OB_LINK ", | 
 | 	"HOST_GPIO ", | 
 | 	"MBOX ", | 
 | 	"ERX2 ", | 
 | 	"SPARE ", | 
 | 	"JTAG ", | 
 | 	"MPU_INTPEND " | 
 | }; | 
 |  | 
 | /* UE Status High CSR */ | 
 | static const char * const ue_status_hi_desc[] = { | 
 | 	"LPCMEMHOST", | 
 | 	"MGMT_MAC", | 
 | 	"PCS0ONLINE", | 
 | 	"MPU_IRAM", | 
 | 	"PCS1ONLINE", | 
 | 	"PCTL0", | 
 | 	"PCTL1", | 
 | 	"PMEM", | 
 | 	"RR", | 
 | 	"TXPB", | 
 | 	"RXPP", | 
 | 	"XAUI", | 
 | 	"TXP", | 
 | 	"ARM", | 
 | 	"IPC", | 
 | 	"HOST2", | 
 | 	"HOST3", | 
 | 	"HOST4", | 
 | 	"HOST5", | 
 | 	"HOST6", | 
 | 	"HOST7", | 
 | 	"ECRC", | 
 | 	"Poison TLP", | 
 | 	"NETC", | 
 | 	"PERIPH", | 
 | 	"LLTXULP", | 
 | 	"D2P", | 
 | 	"RCON", | 
 | 	"LDMA", | 
 | 	"LLTXP", | 
 | 	"LLTXPB", | 
 | 	"Unknown" | 
 | }; | 
 |  | 
 | #define BE_VF_IF_EN_FLAGS	(BE_IF_FLAGS_UNTAGGED | \ | 
 | 				 BE_IF_FLAGS_BROADCAST | \ | 
 | 				 BE_IF_FLAGS_MULTICAST | \ | 
 | 				 BE_IF_FLAGS_PASS_L3L4_ERRORS) | 
 |  | 
 | static void be_queue_free(struct be_adapter *adapter, struct be_queue_info *q) | 
 | { | 
 | 	struct be_dma_mem *mem = &q->dma_mem; | 
 |  | 
 | 	if (mem->va) { | 
 | 		dma_free_coherent(&adapter->pdev->dev, mem->size, mem->va, | 
 | 				  mem->dma); | 
 | 		mem->va = NULL; | 
 | 	} | 
 | } | 
 |  | 
 | static int be_queue_alloc(struct be_adapter *adapter, struct be_queue_info *q, | 
 | 			  u16 len, u16 entry_size) | 
 | { | 
 | 	struct be_dma_mem *mem = &q->dma_mem; | 
 |  | 
 | 	memset(q, 0, sizeof(*q)); | 
 | 	q->len = len; | 
 | 	q->entry_size = entry_size; | 
 | 	mem->size = len * entry_size; | 
 | 	mem->va = dma_zalloc_coherent(&adapter->pdev->dev, mem->size, &mem->dma, | 
 | 				      GFP_KERNEL); | 
 | 	if (!mem->va) | 
 | 		return -ENOMEM; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void be_reg_intr_set(struct be_adapter *adapter, bool enable) | 
 | { | 
 | 	u32 reg, enabled; | 
 |  | 
 | 	pci_read_config_dword(adapter->pdev, PCICFG_MEMBAR_CTRL_INT_CTRL_OFFSET, | 
 | 			      ®); | 
 | 	enabled = reg & MEMBAR_CTRL_INT_CTRL_HOSTINTR_MASK; | 
 |  | 
 | 	if (!enabled && enable) | 
 | 		reg |= MEMBAR_CTRL_INT_CTRL_HOSTINTR_MASK; | 
 | 	else if (enabled && !enable) | 
 | 		reg &= ~MEMBAR_CTRL_INT_CTRL_HOSTINTR_MASK; | 
 | 	else | 
 | 		return; | 
 |  | 
 | 	pci_write_config_dword(adapter->pdev, | 
 | 			       PCICFG_MEMBAR_CTRL_INT_CTRL_OFFSET, reg); | 
 | } | 
 |  | 
 | static void be_intr_set(struct be_adapter *adapter, bool enable) | 
 | { | 
 | 	int status = 0; | 
 |  | 
 | 	/* On lancer interrupts can't be controlled via this register */ | 
 | 	if (lancer_chip(adapter)) | 
 | 		return; | 
 |  | 
 | 	if (be_check_error(adapter, BE_ERROR_EEH)) | 
 | 		return; | 
 |  | 
 | 	status = be_cmd_intr_set(adapter, enable); | 
 | 	if (status) | 
 | 		be_reg_intr_set(adapter, enable); | 
 | } | 
 |  | 
 | static void be_rxq_notify(struct be_adapter *adapter, u16 qid, u16 posted) | 
 | { | 
 | 	u32 val = 0; | 
 |  | 
 | 	if (be_check_error(adapter, BE_ERROR_HW)) | 
 | 		return; | 
 |  | 
 | 	val |= qid & DB_RQ_RING_ID_MASK; | 
 | 	val |= posted << DB_RQ_NUM_POSTED_SHIFT; | 
 |  | 
 | 	wmb(); | 
 | 	iowrite32(val, adapter->db + DB_RQ_OFFSET); | 
 | } | 
 |  | 
 | static void be_txq_notify(struct be_adapter *adapter, struct be_tx_obj *txo, | 
 | 			  u16 posted) | 
 | { | 
 | 	u32 val = 0; | 
 |  | 
 | 	if (be_check_error(adapter, BE_ERROR_HW)) | 
 | 		return; | 
 |  | 
 | 	val |= txo->q.id & DB_TXULP_RING_ID_MASK; | 
 | 	val |= (posted & DB_TXULP_NUM_POSTED_MASK) << DB_TXULP_NUM_POSTED_SHIFT; | 
 |  | 
 | 	wmb(); | 
 | 	iowrite32(val, adapter->db + txo->db_offset); | 
 | } | 
 |  | 
 | static void be_eq_notify(struct be_adapter *adapter, u16 qid, | 
 | 			 bool arm, bool clear_int, u16 num_popped, | 
 | 			 u32 eq_delay_mult_enc) | 
 | { | 
 | 	u32 val = 0; | 
 |  | 
 | 	val |= qid & DB_EQ_RING_ID_MASK; | 
 | 	val |= ((qid & DB_EQ_RING_ID_EXT_MASK) << DB_EQ_RING_ID_EXT_MASK_SHIFT); | 
 |  | 
 | 	if (be_check_error(adapter, BE_ERROR_HW)) | 
 | 		return; | 
 |  | 
 | 	if (arm) | 
 | 		val |= 1 << DB_EQ_REARM_SHIFT; | 
 | 	if (clear_int) | 
 | 		val |= 1 << DB_EQ_CLR_SHIFT; | 
 | 	val |= 1 << DB_EQ_EVNT_SHIFT; | 
 | 	val |= num_popped << DB_EQ_NUM_POPPED_SHIFT; | 
 | 	val |= eq_delay_mult_enc << DB_EQ_R2I_DLY_SHIFT; | 
 | 	iowrite32(val, adapter->db + DB_EQ_OFFSET); | 
 | } | 
 |  | 
 | void be_cq_notify(struct be_adapter *adapter, u16 qid, bool arm, u16 num_popped) | 
 | { | 
 | 	u32 val = 0; | 
 |  | 
 | 	val |= qid & DB_CQ_RING_ID_MASK; | 
 | 	val |= ((qid & DB_CQ_RING_ID_EXT_MASK) << | 
 | 			DB_CQ_RING_ID_EXT_MASK_SHIFT); | 
 |  | 
 | 	if (be_check_error(adapter, BE_ERROR_HW)) | 
 | 		return; | 
 |  | 
 | 	if (arm) | 
 | 		val |= 1 << DB_CQ_REARM_SHIFT; | 
 | 	val |= num_popped << DB_CQ_NUM_POPPED_SHIFT; | 
 | 	iowrite32(val, adapter->db + DB_CQ_OFFSET); | 
 | } | 
 |  | 
 | static int be_dev_mac_add(struct be_adapter *adapter, u8 *mac) | 
 | { | 
 | 	int i; | 
 |  | 
 | 	/* Check if mac has already been added as part of uc-list */ | 
 | 	for (i = 0; i < adapter->uc_macs; i++) { | 
 | 		if (ether_addr_equal(adapter->uc_list[i].mac, mac)) { | 
 | 			/* mac already added, skip addition */ | 
 | 			adapter->pmac_id[0] = adapter->pmac_id[i + 1]; | 
 | 			return 0; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	return be_cmd_pmac_add(adapter, mac, adapter->if_handle, | 
 | 			       &adapter->pmac_id[0], 0); | 
 | } | 
 |  | 
 | static void be_dev_mac_del(struct be_adapter *adapter, int pmac_id) | 
 | { | 
 | 	int i; | 
 |  | 
 | 	/* Skip deletion if the programmed mac is | 
 | 	 * being used in uc-list | 
 | 	 */ | 
 | 	for (i = 0; i < adapter->uc_macs; i++) { | 
 | 		if (adapter->pmac_id[i + 1] == pmac_id) | 
 | 			return; | 
 | 	} | 
 | 	be_cmd_pmac_del(adapter, adapter->if_handle, pmac_id, 0); | 
 | } | 
 |  | 
 | static int be_mac_addr_set(struct net_device *netdev, void *p) | 
 | { | 
 | 	struct be_adapter *adapter = netdev_priv(netdev); | 
 | 	struct device *dev = &adapter->pdev->dev; | 
 | 	struct sockaddr *addr = p; | 
 | 	int status; | 
 | 	u8 mac[ETH_ALEN]; | 
 | 	u32 old_pmac_id = adapter->pmac_id[0]; | 
 |  | 
 | 	if (!is_valid_ether_addr(addr->sa_data)) | 
 | 		return -EADDRNOTAVAIL; | 
 |  | 
 | 	/* Proceed further only if, User provided MAC is different | 
 | 	 * from active MAC | 
 | 	 */ | 
 | 	if (ether_addr_equal(addr->sa_data, adapter->dev_mac)) | 
 | 		return 0; | 
 |  | 
 | 	/* BE3 VFs without FILTMGMT privilege are not allowed to set its MAC | 
 | 	 * address | 
 | 	 */ | 
 | 	if (BEx_chip(adapter) && be_virtfn(adapter) && | 
 | 	    !check_privilege(adapter, BE_PRIV_FILTMGMT)) | 
 | 		return -EPERM; | 
 |  | 
 | 	/* if device is not running, copy MAC to netdev->dev_addr */ | 
 | 	if (!netif_running(netdev)) | 
 | 		goto done; | 
 |  | 
 | 	/* The PMAC_ADD cmd may fail if the VF doesn't have FILTMGMT | 
 | 	 * privilege or if PF did not provision the new MAC address. | 
 | 	 * On BE3, this cmd will always fail if the VF doesn't have the | 
 | 	 * FILTMGMT privilege. This failure is OK, only if the PF programmed | 
 | 	 * the MAC for the VF. | 
 | 	 */ | 
 | 	mutex_lock(&adapter->rx_filter_lock); | 
 | 	status = be_dev_mac_add(adapter, (u8 *)addr->sa_data); | 
 | 	if (!status) { | 
 |  | 
 | 		/* Delete the old programmed MAC. This call may fail if the | 
 | 		 * old MAC was already deleted by the PF driver. | 
 | 		 */ | 
 | 		if (adapter->pmac_id[0] != old_pmac_id) | 
 | 			be_dev_mac_del(adapter, old_pmac_id); | 
 | 	} | 
 |  | 
 | 	mutex_unlock(&adapter->rx_filter_lock); | 
 | 	/* Decide if the new MAC is successfully activated only after | 
 | 	 * querying the FW | 
 | 	 */ | 
 | 	status = be_cmd_get_active_mac(adapter, adapter->pmac_id[0], mac, | 
 | 				       adapter->if_handle, true, 0); | 
 | 	if (status) | 
 | 		goto err; | 
 |  | 
 | 	/* The MAC change did not happen, either due to lack of privilege | 
 | 	 * or PF didn't pre-provision. | 
 | 	 */ | 
 | 	if (!ether_addr_equal(addr->sa_data, mac)) { | 
 | 		status = -EPERM; | 
 | 		goto err; | 
 | 	} | 
 |  | 
 | 	/* Remember currently programmed MAC */ | 
 | 	ether_addr_copy(adapter->dev_mac, addr->sa_data); | 
 | done: | 
 | 	ether_addr_copy(netdev->dev_addr, addr->sa_data); | 
 | 	dev_info(dev, "MAC address changed to %pM\n", addr->sa_data); | 
 | 	return 0; | 
 | err: | 
 | 	dev_warn(dev, "MAC address change to %pM failed\n", addr->sa_data); | 
 | 	return status; | 
 | } | 
 |  | 
 | /* BE2 supports only v0 cmd */ | 
 | static void *hw_stats_from_cmd(struct be_adapter *adapter) | 
 | { | 
 | 	if (BE2_chip(adapter)) { | 
 | 		struct be_cmd_resp_get_stats_v0 *cmd = adapter->stats_cmd.va; | 
 |  | 
 | 		return &cmd->hw_stats; | 
 | 	} else if (BE3_chip(adapter)) { | 
 | 		struct be_cmd_resp_get_stats_v1 *cmd = adapter->stats_cmd.va; | 
 |  | 
 | 		return &cmd->hw_stats; | 
 | 	} else { | 
 | 		struct be_cmd_resp_get_stats_v2 *cmd = adapter->stats_cmd.va; | 
 |  | 
 | 		return &cmd->hw_stats; | 
 | 	} | 
 | } | 
 |  | 
 | /* BE2 supports only v0 cmd */ | 
 | static void *be_erx_stats_from_cmd(struct be_adapter *adapter) | 
 | { | 
 | 	if (BE2_chip(adapter)) { | 
 | 		struct be_hw_stats_v0 *hw_stats = hw_stats_from_cmd(adapter); | 
 |  | 
 | 		return &hw_stats->erx; | 
 | 	} else if (BE3_chip(adapter)) { | 
 | 		struct be_hw_stats_v1 *hw_stats = hw_stats_from_cmd(adapter); | 
 |  | 
 | 		return &hw_stats->erx; | 
 | 	} else { | 
 | 		struct be_hw_stats_v2 *hw_stats = hw_stats_from_cmd(adapter); | 
 |  | 
 | 		return &hw_stats->erx; | 
 | 	} | 
 | } | 
 |  | 
 | static void populate_be_v0_stats(struct be_adapter *adapter) | 
 | { | 
 | 	struct be_hw_stats_v0 *hw_stats = hw_stats_from_cmd(adapter); | 
 | 	struct be_pmem_stats *pmem_sts = &hw_stats->pmem; | 
 | 	struct be_rxf_stats_v0 *rxf_stats = &hw_stats->rxf; | 
 | 	struct be_port_rxf_stats_v0 *port_stats = | 
 | 					&rxf_stats->port[adapter->port_num]; | 
 | 	struct be_drv_stats *drvs = &adapter->drv_stats; | 
 |  | 
 | 	be_dws_le_to_cpu(hw_stats, sizeof(*hw_stats)); | 
 | 	drvs->rx_pause_frames = port_stats->rx_pause_frames; | 
 | 	drvs->rx_crc_errors = port_stats->rx_crc_errors; | 
 | 	drvs->rx_control_frames = port_stats->rx_control_frames; | 
 | 	drvs->rx_in_range_errors = port_stats->rx_in_range_errors; | 
 | 	drvs->rx_frame_too_long = port_stats->rx_frame_too_long; | 
 | 	drvs->rx_dropped_runt = port_stats->rx_dropped_runt; | 
 | 	drvs->rx_ip_checksum_errs = port_stats->rx_ip_checksum_errs; | 
 | 	drvs->rx_tcp_checksum_errs = port_stats->rx_tcp_checksum_errs; | 
 | 	drvs->rx_udp_checksum_errs = port_stats->rx_udp_checksum_errs; | 
 | 	drvs->rxpp_fifo_overflow_drop = port_stats->rx_fifo_overflow; | 
 | 	drvs->rx_dropped_tcp_length = port_stats->rx_dropped_tcp_length; | 
 | 	drvs->rx_dropped_too_small = port_stats->rx_dropped_too_small; | 
 | 	drvs->rx_dropped_too_short = port_stats->rx_dropped_too_short; | 
 | 	drvs->rx_out_range_errors = port_stats->rx_out_range_errors; | 
 | 	drvs->rx_input_fifo_overflow_drop = port_stats->rx_input_fifo_overflow; | 
 | 	drvs->rx_dropped_header_too_small = | 
 | 		port_stats->rx_dropped_header_too_small; | 
 | 	drvs->rx_address_filtered = | 
 | 					port_stats->rx_address_filtered + | 
 | 					port_stats->rx_vlan_filtered; | 
 | 	drvs->rx_alignment_symbol_errors = | 
 | 		port_stats->rx_alignment_symbol_errors; | 
 |  | 
 | 	drvs->tx_pauseframes = port_stats->tx_pauseframes; | 
 | 	drvs->tx_controlframes = port_stats->tx_controlframes; | 
 |  | 
 | 	if (adapter->port_num) | 
 | 		drvs->jabber_events = rxf_stats->port1_jabber_events; | 
 | 	else | 
 | 		drvs->jabber_events = rxf_stats->port0_jabber_events; | 
 | 	drvs->rx_drops_no_pbuf = rxf_stats->rx_drops_no_pbuf; | 
 | 	drvs->rx_drops_no_erx_descr = rxf_stats->rx_drops_no_erx_descr; | 
 | 	drvs->forwarded_packets = rxf_stats->forwarded_packets; | 
 | 	drvs->rx_drops_mtu = rxf_stats->rx_drops_mtu; | 
 | 	drvs->rx_drops_no_tpre_descr = rxf_stats->rx_drops_no_tpre_descr; | 
 | 	drvs->rx_drops_too_many_frags = rxf_stats->rx_drops_too_many_frags; | 
 | 	adapter->drv_stats.eth_red_drops = pmem_sts->eth_red_drops; | 
 | } | 
 |  | 
 | static void populate_be_v1_stats(struct be_adapter *adapter) | 
 | { | 
 | 	struct be_hw_stats_v1 *hw_stats = hw_stats_from_cmd(adapter); | 
 | 	struct be_pmem_stats *pmem_sts = &hw_stats->pmem; | 
 | 	struct be_rxf_stats_v1 *rxf_stats = &hw_stats->rxf; | 
 | 	struct be_port_rxf_stats_v1 *port_stats = | 
 | 					&rxf_stats->port[adapter->port_num]; | 
 | 	struct be_drv_stats *drvs = &adapter->drv_stats; | 
 |  | 
 | 	be_dws_le_to_cpu(hw_stats, sizeof(*hw_stats)); | 
 | 	drvs->pmem_fifo_overflow_drop = port_stats->pmem_fifo_overflow_drop; | 
 | 	drvs->rx_priority_pause_frames = port_stats->rx_priority_pause_frames; | 
 | 	drvs->rx_pause_frames = port_stats->rx_pause_frames; | 
 | 	drvs->rx_crc_errors = port_stats->rx_crc_errors; | 
 | 	drvs->rx_control_frames = port_stats->rx_control_frames; | 
 | 	drvs->rx_in_range_errors = port_stats->rx_in_range_errors; | 
 | 	drvs->rx_frame_too_long = port_stats->rx_frame_too_long; | 
 | 	drvs->rx_dropped_runt = port_stats->rx_dropped_runt; | 
 | 	drvs->rx_ip_checksum_errs = port_stats->rx_ip_checksum_errs; | 
 | 	drvs->rx_tcp_checksum_errs = port_stats->rx_tcp_checksum_errs; | 
 | 	drvs->rx_udp_checksum_errs = port_stats->rx_udp_checksum_errs; | 
 | 	drvs->rx_dropped_tcp_length = port_stats->rx_dropped_tcp_length; | 
 | 	drvs->rx_dropped_too_small = port_stats->rx_dropped_too_small; | 
 | 	drvs->rx_dropped_too_short = port_stats->rx_dropped_too_short; | 
 | 	drvs->rx_out_range_errors = port_stats->rx_out_range_errors; | 
 | 	drvs->rx_dropped_header_too_small = | 
 | 		port_stats->rx_dropped_header_too_small; | 
 | 	drvs->rx_input_fifo_overflow_drop = | 
 | 		port_stats->rx_input_fifo_overflow_drop; | 
 | 	drvs->rx_address_filtered = port_stats->rx_address_filtered; | 
 | 	drvs->rx_alignment_symbol_errors = | 
 | 		port_stats->rx_alignment_symbol_errors; | 
 | 	drvs->rxpp_fifo_overflow_drop = port_stats->rxpp_fifo_overflow_drop; | 
 | 	drvs->tx_pauseframes = port_stats->tx_pauseframes; | 
 | 	drvs->tx_controlframes = port_stats->tx_controlframes; | 
 | 	drvs->tx_priority_pauseframes = port_stats->tx_priority_pauseframes; | 
 | 	drvs->jabber_events = port_stats->jabber_events; | 
 | 	drvs->rx_drops_no_pbuf = rxf_stats->rx_drops_no_pbuf; | 
 | 	drvs->rx_drops_no_erx_descr = rxf_stats->rx_drops_no_erx_descr; | 
 | 	drvs->forwarded_packets = rxf_stats->forwarded_packets; | 
 | 	drvs->rx_drops_mtu = rxf_stats->rx_drops_mtu; | 
 | 	drvs->rx_drops_no_tpre_descr = rxf_stats->rx_drops_no_tpre_descr; | 
 | 	drvs->rx_drops_too_many_frags = rxf_stats->rx_drops_too_many_frags; | 
 | 	adapter->drv_stats.eth_red_drops = pmem_sts->eth_red_drops; | 
 | } | 
 |  | 
 | static void populate_be_v2_stats(struct be_adapter *adapter) | 
 | { | 
 | 	struct be_hw_stats_v2 *hw_stats = hw_stats_from_cmd(adapter); | 
 | 	struct be_pmem_stats *pmem_sts = &hw_stats->pmem; | 
 | 	struct be_rxf_stats_v2 *rxf_stats = &hw_stats->rxf; | 
 | 	struct be_port_rxf_stats_v2 *port_stats = | 
 | 					&rxf_stats->port[adapter->port_num]; | 
 | 	struct be_drv_stats *drvs = &adapter->drv_stats; | 
 |  | 
 | 	be_dws_le_to_cpu(hw_stats, sizeof(*hw_stats)); | 
 | 	drvs->pmem_fifo_overflow_drop = port_stats->pmem_fifo_overflow_drop; | 
 | 	drvs->rx_priority_pause_frames = port_stats->rx_priority_pause_frames; | 
 | 	drvs->rx_pause_frames = port_stats->rx_pause_frames; | 
 | 	drvs->rx_crc_errors = port_stats->rx_crc_errors; | 
 | 	drvs->rx_control_frames = port_stats->rx_control_frames; | 
 | 	drvs->rx_in_range_errors = port_stats->rx_in_range_errors; | 
 | 	drvs->rx_frame_too_long = port_stats->rx_frame_too_long; | 
 | 	drvs->rx_dropped_runt = port_stats->rx_dropped_runt; | 
 | 	drvs->rx_ip_checksum_errs = port_stats->rx_ip_checksum_errs; | 
 | 	drvs->rx_tcp_checksum_errs = port_stats->rx_tcp_checksum_errs; | 
 | 	drvs->rx_udp_checksum_errs = port_stats->rx_udp_checksum_errs; | 
 | 	drvs->rx_dropped_tcp_length = port_stats->rx_dropped_tcp_length; | 
 | 	drvs->rx_dropped_too_small = port_stats->rx_dropped_too_small; | 
 | 	drvs->rx_dropped_too_short = port_stats->rx_dropped_too_short; | 
 | 	drvs->rx_out_range_errors = port_stats->rx_out_range_errors; | 
 | 	drvs->rx_dropped_header_too_small = | 
 | 		port_stats->rx_dropped_header_too_small; | 
 | 	drvs->rx_input_fifo_overflow_drop = | 
 | 		port_stats->rx_input_fifo_overflow_drop; | 
 | 	drvs->rx_address_filtered = port_stats->rx_address_filtered; | 
 | 	drvs->rx_alignment_symbol_errors = | 
 | 		port_stats->rx_alignment_symbol_errors; | 
 | 	drvs->rxpp_fifo_overflow_drop = port_stats->rxpp_fifo_overflow_drop; | 
 | 	drvs->tx_pauseframes = port_stats->tx_pauseframes; | 
 | 	drvs->tx_controlframes = port_stats->tx_controlframes; | 
 | 	drvs->tx_priority_pauseframes = port_stats->tx_priority_pauseframes; | 
 | 	drvs->jabber_events = port_stats->jabber_events; | 
 | 	drvs->rx_drops_no_pbuf = rxf_stats->rx_drops_no_pbuf; | 
 | 	drvs->rx_drops_no_erx_descr = rxf_stats->rx_drops_no_erx_descr; | 
 | 	drvs->forwarded_packets = rxf_stats->forwarded_packets; | 
 | 	drvs->rx_drops_mtu = rxf_stats->rx_drops_mtu; | 
 | 	drvs->rx_drops_no_tpre_descr = rxf_stats->rx_drops_no_tpre_descr; | 
 | 	drvs->rx_drops_too_many_frags = rxf_stats->rx_drops_too_many_frags; | 
 | 	adapter->drv_stats.eth_red_drops = pmem_sts->eth_red_drops; | 
 | 	if (be_roce_supported(adapter)) { | 
 | 		drvs->rx_roce_bytes_lsd = port_stats->roce_bytes_received_lsd; | 
 | 		drvs->rx_roce_bytes_msd = port_stats->roce_bytes_received_msd; | 
 | 		drvs->rx_roce_frames = port_stats->roce_frames_received; | 
 | 		drvs->roce_drops_crc = port_stats->roce_drops_crc; | 
 | 		drvs->roce_drops_payload_len = | 
 | 			port_stats->roce_drops_payload_len; | 
 | 	} | 
 | } | 
 |  | 
 | static void populate_lancer_stats(struct be_adapter *adapter) | 
 | { | 
 | 	struct be_drv_stats *drvs = &adapter->drv_stats; | 
 | 	struct lancer_pport_stats *pport_stats = pport_stats_from_cmd(adapter); | 
 |  | 
 | 	be_dws_le_to_cpu(pport_stats, sizeof(*pport_stats)); | 
 | 	drvs->rx_pause_frames = pport_stats->rx_pause_frames_lo; | 
 | 	drvs->rx_crc_errors = pport_stats->rx_crc_errors_lo; | 
 | 	drvs->rx_control_frames = pport_stats->rx_control_frames_lo; | 
 | 	drvs->rx_in_range_errors = pport_stats->rx_in_range_errors; | 
 | 	drvs->rx_frame_too_long = pport_stats->rx_frames_too_long_lo; | 
 | 	drvs->rx_dropped_runt = pport_stats->rx_dropped_runt; | 
 | 	drvs->rx_ip_checksum_errs = pport_stats->rx_ip_checksum_errors; | 
 | 	drvs->rx_tcp_checksum_errs = pport_stats->rx_tcp_checksum_errors; | 
 | 	drvs->rx_udp_checksum_errs = pport_stats->rx_udp_checksum_errors; | 
 | 	drvs->rx_dropped_tcp_length = | 
 | 				pport_stats->rx_dropped_invalid_tcp_length; | 
 | 	drvs->rx_dropped_too_small = pport_stats->rx_dropped_too_small; | 
 | 	drvs->rx_dropped_too_short = pport_stats->rx_dropped_too_short; | 
 | 	drvs->rx_out_range_errors = pport_stats->rx_out_of_range_errors; | 
 | 	drvs->rx_dropped_header_too_small = | 
 | 				pport_stats->rx_dropped_header_too_small; | 
 | 	drvs->rx_input_fifo_overflow_drop = pport_stats->rx_fifo_overflow; | 
 | 	drvs->rx_address_filtered = | 
 | 					pport_stats->rx_address_filtered + | 
 | 					pport_stats->rx_vlan_filtered; | 
 | 	drvs->rx_alignment_symbol_errors = pport_stats->rx_symbol_errors_lo; | 
 | 	drvs->rxpp_fifo_overflow_drop = pport_stats->rx_fifo_overflow; | 
 | 	drvs->tx_pauseframes = pport_stats->tx_pause_frames_lo; | 
 | 	drvs->tx_controlframes = pport_stats->tx_control_frames_lo; | 
 | 	drvs->jabber_events = pport_stats->rx_jabbers; | 
 | 	drvs->forwarded_packets = pport_stats->num_forwards_lo; | 
 | 	drvs->rx_drops_mtu = pport_stats->rx_drops_mtu_lo; | 
 | 	drvs->rx_drops_too_many_frags = | 
 | 				pport_stats->rx_drops_too_many_frags_lo; | 
 | } | 
 |  | 
 | static void accumulate_16bit_val(u32 *acc, u16 val) | 
 | { | 
 | #define lo(x)			(x & 0xFFFF) | 
 | #define hi(x)			(x & 0xFFFF0000) | 
 | 	bool wrapped = val < lo(*acc); | 
 | 	u32 newacc = hi(*acc) + val; | 
 |  | 
 | 	if (wrapped) | 
 | 		newacc += 65536; | 
 | 	WRITE_ONCE(*acc, newacc); | 
 | } | 
 |  | 
 | static void populate_erx_stats(struct be_adapter *adapter, | 
 | 			       struct be_rx_obj *rxo, u32 erx_stat) | 
 | { | 
 | 	if (!BEx_chip(adapter)) | 
 | 		rx_stats(rxo)->rx_drops_no_frags = erx_stat; | 
 | 	else | 
 | 		/* below erx HW counter can actually wrap around after | 
 | 		 * 65535. Driver accumulates a 32-bit value | 
 | 		 */ | 
 | 		accumulate_16bit_val(&rx_stats(rxo)->rx_drops_no_frags, | 
 | 				     (u16)erx_stat); | 
 | } | 
 |  | 
 | void be_parse_stats(struct be_adapter *adapter) | 
 | { | 
 | 	struct be_erx_stats_v2 *erx = be_erx_stats_from_cmd(adapter); | 
 | 	struct be_rx_obj *rxo; | 
 | 	int i; | 
 | 	u32 erx_stat; | 
 |  | 
 | 	if (lancer_chip(adapter)) { | 
 | 		populate_lancer_stats(adapter); | 
 | 	} else { | 
 | 		if (BE2_chip(adapter)) | 
 | 			populate_be_v0_stats(adapter); | 
 | 		else if (BE3_chip(adapter)) | 
 | 			/* for BE3 */ | 
 | 			populate_be_v1_stats(adapter); | 
 | 		else | 
 | 			populate_be_v2_stats(adapter); | 
 |  | 
 | 		/* erx_v2 is longer than v0, v1. use v2 for v0, v1 access */ | 
 | 		for_all_rx_queues(adapter, rxo, i) { | 
 | 			erx_stat = erx->rx_drops_no_fragments[rxo->q.id]; | 
 | 			populate_erx_stats(adapter, rxo, erx_stat); | 
 | 		} | 
 | 	} | 
 | } | 
 |  | 
 | static void be_get_stats64(struct net_device *netdev, | 
 | 			   struct rtnl_link_stats64 *stats) | 
 | { | 
 | 	struct be_adapter *adapter = netdev_priv(netdev); | 
 | 	struct be_drv_stats *drvs = &adapter->drv_stats; | 
 | 	struct be_rx_obj *rxo; | 
 | 	struct be_tx_obj *txo; | 
 | 	u64 pkts, bytes; | 
 | 	unsigned int start; | 
 | 	int i; | 
 |  | 
 | 	for_all_rx_queues(adapter, rxo, i) { | 
 | 		const struct be_rx_stats *rx_stats = rx_stats(rxo); | 
 |  | 
 | 		do { | 
 | 			start = u64_stats_fetch_begin_irq(&rx_stats->sync); | 
 | 			pkts = rx_stats(rxo)->rx_pkts; | 
 | 			bytes = rx_stats(rxo)->rx_bytes; | 
 | 		} while (u64_stats_fetch_retry_irq(&rx_stats->sync, start)); | 
 | 		stats->rx_packets += pkts; | 
 | 		stats->rx_bytes += bytes; | 
 | 		stats->multicast += rx_stats(rxo)->rx_mcast_pkts; | 
 | 		stats->rx_dropped += rx_stats(rxo)->rx_drops_no_skbs + | 
 | 					rx_stats(rxo)->rx_drops_no_frags; | 
 | 	} | 
 |  | 
 | 	for_all_tx_queues(adapter, txo, i) { | 
 | 		const struct be_tx_stats *tx_stats = tx_stats(txo); | 
 |  | 
 | 		do { | 
 | 			start = u64_stats_fetch_begin_irq(&tx_stats->sync); | 
 | 			pkts = tx_stats(txo)->tx_pkts; | 
 | 			bytes = tx_stats(txo)->tx_bytes; | 
 | 		} while (u64_stats_fetch_retry_irq(&tx_stats->sync, start)); | 
 | 		stats->tx_packets += pkts; | 
 | 		stats->tx_bytes += bytes; | 
 | 	} | 
 |  | 
 | 	/* bad pkts received */ | 
 | 	stats->rx_errors = drvs->rx_crc_errors + | 
 | 		drvs->rx_alignment_symbol_errors + | 
 | 		drvs->rx_in_range_errors + | 
 | 		drvs->rx_out_range_errors + | 
 | 		drvs->rx_frame_too_long + | 
 | 		drvs->rx_dropped_too_small + | 
 | 		drvs->rx_dropped_too_short + | 
 | 		drvs->rx_dropped_header_too_small + | 
 | 		drvs->rx_dropped_tcp_length + | 
 | 		drvs->rx_dropped_runt; | 
 |  | 
 | 	/* detailed rx errors */ | 
 | 	stats->rx_length_errors = drvs->rx_in_range_errors + | 
 | 		drvs->rx_out_range_errors + | 
 | 		drvs->rx_frame_too_long; | 
 |  | 
 | 	stats->rx_crc_errors = drvs->rx_crc_errors; | 
 |  | 
 | 	/* frame alignment errors */ | 
 | 	stats->rx_frame_errors = drvs->rx_alignment_symbol_errors; | 
 |  | 
 | 	/* receiver fifo overrun */ | 
 | 	/* drops_no_pbuf is no per i/f, it's per BE card */ | 
 | 	stats->rx_fifo_errors = drvs->rxpp_fifo_overflow_drop + | 
 | 				drvs->rx_input_fifo_overflow_drop + | 
 | 				drvs->rx_drops_no_pbuf; | 
 | } | 
 |  | 
 | void be_link_status_update(struct be_adapter *adapter, u8 link_status) | 
 | { | 
 | 	struct net_device *netdev = adapter->netdev; | 
 |  | 
 | 	if (!(adapter->flags & BE_FLAGS_LINK_STATUS_INIT)) { | 
 | 		netif_carrier_off(netdev); | 
 | 		adapter->flags |= BE_FLAGS_LINK_STATUS_INIT; | 
 | 	} | 
 |  | 
 | 	if (link_status) | 
 | 		netif_carrier_on(netdev); | 
 | 	else | 
 | 		netif_carrier_off(netdev); | 
 |  | 
 | 	netdev_info(netdev, "Link is %s\n", link_status ? "Up" : "Down"); | 
 | } | 
 |  | 
 | static int be_gso_hdr_len(struct sk_buff *skb) | 
 | { | 
 | 	if (skb->encapsulation) | 
 | 		return skb_inner_transport_offset(skb) + | 
 | 		       inner_tcp_hdrlen(skb); | 
 | 	return skb_transport_offset(skb) + tcp_hdrlen(skb); | 
 | } | 
 |  | 
 | static void be_tx_stats_update(struct be_tx_obj *txo, struct sk_buff *skb) | 
 | { | 
 | 	struct be_tx_stats *stats = tx_stats(txo); | 
 | 	u32 tx_pkts = skb_shinfo(skb)->gso_segs ? : 1; | 
 | 	/* Account for headers which get duplicated in TSO pkt */ | 
 | 	u32 dup_hdr_len = tx_pkts > 1 ? be_gso_hdr_len(skb) * (tx_pkts - 1) : 0; | 
 |  | 
 | 	u64_stats_update_begin(&stats->sync); | 
 | 	stats->tx_reqs++; | 
 | 	stats->tx_bytes += skb->len + dup_hdr_len; | 
 | 	stats->tx_pkts += tx_pkts; | 
 | 	if (skb->encapsulation && skb->ip_summed == CHECKSUM_PARTIAL) | 
 | 		stats->tx_vxlan_offload_pkts += tx_pkts; | 
 | 	u64_stats_update_end(&stats->sync); | 
 | } | 
 |  | 
 | /* Returns number of WRBs needed for the skb */ | 
 | static u32 skb_wrb_cnt(struct sk_buff *skb) | 
 | { | 
 | 	/* +1 for the header wrb */ | 
 | 	return 1 + (skb_headlen(skb) ? 1 : 0) + skb_shinfo(skb)->nr_frags; | 
 | } | 
 |  | 
 | static inline void wrb_fill(struct be_eth_wrb *wrb, u64 addr, int len) | 
 | { | 
 | 	wrb->frag_pa_hi = cpu_to_le32(upper_32_bits(addr)); | 
 | 	wrb->frag_pa_lo = cpu_to_le32(lower_32_bits(addr)); | 
 | 	wrb->frag_len = cpu_to_le32(len & ETH_WRB_FRAG_LEN_MASK); | 
 | 	wrb->rsvd0 = 0; | 
 | } | 
 |  | 
 | /* A dummy wrb is just all zeros. Using a separate routine for dummy-wrb | 
 |  * to avoid the swap and shift/mask operations in wrb_fill(). | 
 |  */ | 
 | static inline void wrb_fill_dummy(struct be_eth_wrb *wrb) | 
 | { | 
 | 	wrb->frag_pa_hi = 0; | 
 | 	wrb->frag_pa_lo = 0; | 
 | 	wrb->frag_len = 0; | 
 | 	wrb->rsvd0 = 0; | 
 | } | 
 |  | 
 | static inline u16 be_get_tx_vlan_tag(struct be_adapter *adapter, | 
 | 				     struct sk_buff *skb) | 
 | { | 
 | 	u8 vlan_prio; | 
 | 	u16 vlan_tag; | 
 |  | 
 | 	vlan_tag = skb_vlan_tag_get(skb); | 
 | 	vlan_prio = (vlan_tag & VLAN_PRIO_MASK) >> VLAN_PRIO_SHIFT; | 
 | 	/* If vlan priority provided by OS is NOT in available bmap */ | 
 | 	if (!(adapter->vlan_prio_bmap & (1 << vlan_prio))) | 
 | 		vlan_tag = (vlan_tag & ~VLAN_PRIO_MASK) | | 
 | 				adapter->recommended_prio_bits; | 
 |  | 
 | 	return vlan_tag; | 
 | } | 
 |  | 
 | /* Used only for IP tunnel packets */ | 
 | static u16 skb_inner_ip_proto(struct sk_buff *skb) | 
 | { | 
 | 	return (inner_ip_hdr(skb)->version == 4) ? | 
 | 		inner_ip_hdr(skb)->protocol : inner_ipv6_hdr(skb)->nexthdr; | 
 | } | 
 |  | 
 | static u16 skb_ip_proto(struct sk_buff *skb) | 
 | { | 
 | 	return (ip_hdr(skb)->version == 4) ? | 
 | 		ip_hdr(skb)->protocol : ipv6_hdr(skb)->nexthdr; | 
 | } | 
 |  | 
 | static inline bool be_is_txq_full(struct be_tx_obj *txo) | 
 | { | 
 | 	return atomic_read(&txo->q.used) + BE_MAX_TX_FRAG_COUNT >= txo->q.len; | 
 | } | 
 |  | 
 | static inline bool be_can_txq_wake(struct be_tx_obj *txo) | 
 | { | 
 | 	return atomic_read(&txo->q.used) < txo->q.len / 2; | 
 | } | 
 |  | 
 | static inline bool be_is_tx_compl_pending(struct be_tx_obj *txo) | 
 | { | 
 | 	return atomic_read(&txo->q.used) > txo->pend_wrb_cnt; | 
 | } | 
 |  | 
 | static void be_get_wrb_params_from_skb(struct be_adapter *adapter, | 
 | 				       struct sk_buff *skb, | 
 | 				       struct be_wrb_params *wrb_params) | 
 | { | 
 | 	u16 proto; | 
 |  | 
 | 	if (skb_is_gso(skb)) { | 
 | 		BE_WRB_F_SET(wrb_params->features, LSO, 1); | 
 | 		wrb_params->lso_mss = skb_shinfo(skb)->gso_size; | 
 | 		if (skb_is_gso_v6(skb) && !lancer_chip(adapter)) | 
 | 			BE_WRB_F_SET(wrb_params->features, LSO6, 1); | 
 | 	} else if (skb->ip_summed == CHECKSUM_PARTIAL) { | 
 | 		if (skb->encapsulation) { | 
 | 			BE_WRB_F_SET(wrb_params->features, IPCS, 1); | 
 | 			proto = skb_inner_ip_proto(skb); | 
 | 		} else { | 
 | 			proto = skb_ip_proto(skb); | 
 | 		} | 
 | 		if (proto == IPPROTO_TCP) | 
 | 			BE_WRB_F_SET(wrb_params->features, TCPCS, 1); | 
 | 		else if (proto == IPPROTO_UDP) | 
 | 			BE_WRB_F_SET(wrb_params->features, UDPCS, 1); | 
 | 	} | 
 |  | 
 | 	if (skb_vlan_tag_present(skb)) { | 
 | 		BE_WRB_F_SET(wrb_params->features, VLAN, 1); | 
 | 		wrb_params->vlan_tag = be_get_tx_vlan_tag(adapter, skb); | 
 | 	} | 
 |  | 
 | 	BE_WRB_F_SET(wrb_params->features, CRC, 1); | 
 | } | 
 |  | 
 | static void wrb_fill_hdr(struct be_adapter *adapter, | 
 | 			 struct be_eth_hdr_wrb *hdr, | 
 | 			 struct be_wrb_params *wrb_params, | 
 | 			 struct sk_buff *skb) | 
 | { | 
 | 	memset(hdr, 0, sizeof(*hdr)); | 
 |  | 
 | 	SET_TX_WRB_HDR_BITS(crc, hdr, | 
 | 			    BE_WRB_F_GET(wrb_params->features, CRC)); | 
 | 	SET_TX_WRB_HDR_BITS(ipcs, hdr, | 
 | 			    BE_WRB_F_GET(wrb_params->features, IPCS)); | 
 | 	SET_TX_WRB_HDR_BITS(tcpcs, hdr, | 
 | 			    BE_WRB_F_GET(wrb_params->features, TCPCS)); | 
 | 	SET_TX_WRB_HDR_BITS(udpcs, hdr, | 
 | 			    BE_WRB_F_GET(wrb_params->features, UDPCS)); | 
 |  | 
 | 	SET_TX_WRB_HDR_BITS(lso, hdr, | 
 | 			    BE_WRB_F_GET(wrb_params->features, LSO)); | 
 | 	SET_TX_WRB_HDR_BITS(lso6, hdr, | 
 | 			    BE_WRB_F_GET(wrb_params->features, LSO6)); | 
 | 	SET_TX_WRB_HDR_BITS(lso_mss, hdr, wrb_params->lso_mss); | 
 |  | 
 | 	/* Hack to skip HW VLAN tagging needs evt = 1, compl = 0. When this | 
 | 	 * hack is not needed, the evt bit is set while ringing DB. | 
 | 	 */ | 
 | 	SET_TX_WRB_HDR_BITS(event, hdr, | 
 | 			    BE_WRB_F_GET(wrb_params->features, VLAN_SKIP_HW)); | 
 | 	SET_TX_WRB_HDR_BITS(vlan, hdr, | 
 | 			    BE_WRB_F_GET(wrb_params->features, VLAN)); | 
 | 	SET_TX_WRB_HDR_BITS(vlan_tag, hdr, wrb_params->vlan_tag); | 
 |  | 
 | 	SET_TX_WRB_HDR_BITS(num_wrb, hdr, skb_wrb_cnt(skb)); | 
 | 	SET_TX_WRB_HDR_BITS(len, hdr, skb->len); | 
 | 	SET_TX_WRB_HDR_BITS(mgmt, hdr, | 
 | 			    BE_WRB_F_GET(wrb_params->features, OS2BMC)); | 
 | } | 
 |  | 
 | static void unmap_tx_frag(struct device *dev, struct be_eth_wrb *wrb, | 
 | 			  bool unmap_single) | 
 | { | 
 | 	dma_addr_t dma; | 
 | 	u32 frag_len = le32_to_cpu(wrb->frag_len); | 
 |  | 
 |  | 
 | 	dma = (u64)le32_to_cpu(wrb->frag_pa_hi) << 32 | | 
 | 		(u64)le32_to_cpu(wrb->frag_pa_lo); | 
 | 	if (frag_len) { | 
 | 		if (unmap_single) | 
 | 			dma_unmap_single(dev, dma, frag_len, DMA_TO_DEVICE); | 
 | 		else | 
 | 			dma_unmap_page(dev, dma, frag_len, DMA_TO_DEVICE); | 
 | 	} | 
 | } | 
 |  | 
 | /* Grab a WRB header for xmit */ | 
 | static u32 be_tx_get_wrb_hdr(struct be_tx_obj *txo) | 
 | { | 
 | 	u32 head = txo->q.head; | 
 |  | 
 | 	queue_head_inc(&txo->q); | 
 | 	return head; | 
 | } | 
 |  | 
 | /* Set up the WRB header for xmit */ | 
 | static void be_tx_setup_wrb_hdr(struct be_adapter *adapter, | 
 | 				struct be_tx_obj *txo, | 
 | 				struct be_wrb_params *wrb_params, | 
 | 				struct sk_buff *skb, u16 head) | 
 | { | 
 | 	u32 num_frags = skb_wrb_cnt(skb); | 
 | 	struct be_queue_info *txq = &txo->q; | 
 | 	struct be_eth_hdr_wrb *hdr = queue_index_node(txq, head); | 
 |  | 
 | 	wrb_fill_hdr(adapter, hdr, wrb_params, skb); | 
 | 	be_dws_cpu_to_le(hdr, sizeof(*hdr)); | 
 |  | 
 | 	BUG_ON(txo->sent_skb_list[head]); | 
 | 	txo->sent_skb_list[head] = skb; | 
 | 	txo->last_req_hdr = head; | 
 | 	atomic_add(num_frags, &txq->used); | 
 | 	txo->last_req_wrb_cnt = num_frags; | 
 | 	txo->pend_wrb_cnt += num_frags; | 
 | } | 
 |  | 
 | /* Setup a WRB fragment (buffer descriptor) for xmit */ | 
 | static void be_tx_setup_wrb_frag(struct be_tx_obj *txo, dma_addr_t busaddr, | 
 | 				 int len) | 
 | { | 
 | 	struct be_eth_wrb *wrb; | 
 | 	struct be_queue_info *txq = &txo->q; | 
 |  | 
 | 	wrb = queue_head_node(txq); | 
 | 	wrb_fill(wrb, busaddr, len); | 
 | 	queue_head_inc(txq); | 
 | } | 
 |  | 
 | /* Bring the queue back to the state it was in before be_xmit_enqueue() routine | 
 |  * was invoked. The producer index is restored to the previous packet and the | 
 |  * WRBs of the current packet are unmapped. Invoked to handle tx setup errors. | 
 |  */ | 
 | static void be_xmit_restore(struct be_adapter *adapter, | 
 | 			    struct be_tx_obj *txo, u32 head, bool map_single, | 
 | 			    u32 copied) | 
 | { | 
 | 	struct device *dev; | 
 | 	struct be_eth_wrb *wrb; | 
 | 	struct be_queue_info *txq = &txo->q; | 
 |  | 
 | 	dev = &adapter->pdev->dev; | 
 | 	txq->head = head; | 
 |  | 
 | 	/* skip the first wrb (hdr); it's not mapped */ | 
 | 	queue_head_inc(txq); | 
 | 	while (copied) { | 
 | 		wrb = queue_head_node(txq); | 
 | 		unmap_tx_frag(dev, wrb, map_single); | 
 | 		map_single = false; | 
 | 		copied -= le32_to_cpu(wrb->frag_len); | 
 | 		queue_head_inc(txq); | 
 | 	} | 
 |  | 
 | 	txq->head = head; | 
 | } | 
 |  | 
 | /* Enqueue the given packet for transmit. This routine allocates WRBs for the | 
 |  * packet, dma maps the packet buffers and sets up the WRBs. Returns the number | 
 |  * of WRBs used up by the packet. | 
 |  */ | 
 | static u32 be_xmit_enqueue(struct be_adapter *adapter, struct be_tx_obj *txo, | 
 | 			   struct sk_buff *skb, | 
 | 			   struct be_wrb_params *wrb_params) | 
 | { | 
 | 	u32 i, copied = 0, wrb_cnt = skb_wrb_cnt(skb); | 
 | 	struct device *dev = &adapter->pdev->dev; | 
 | 	bool map_single = false; | 
 | 	u32 head; | 
 | 	dma_addr_t busaddr; | 
 | 	int len; | 
 |  | 
 | 	head = be_tx_get_wrb_hdr(txo); | 
 |  | 
 | 	if (skb->len > skb->data_len) { | 
 | 		len = skb_headlen(skb); | 
 |  | 
 | 		busaddr = dma_map_single(dev, skb->data, len, DMA_TO_DEVICE); | 
 | 		if (dma_mapping_error(dev, busaddr)) | 
 | 			goto dma_err; | 
 | 		map_single = true; | 
 | 		be_tx_setup_wrb_frag(txo, busaddr, len); | 
 | 		copied += len; | 
 | 	} | 
 |  | 
 | 	for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) { | 
 | 		const struct skb_frag_struct *frag = &skb_shinfo(skb)->frags[i]; | 
 | 		len = skb_frag_size(frag); | 
 |  | 
 | 		busaddr = skb_frag_dma_map(dev, frag, 0, len, DMA_TO_DEVICE); | 
 | 		if (dma_mapping_error(dev, busaddr)) | 
 | 			goto dma_err; | 
 | 		be_tx_setup_wrb_frag(txo, busaddr, len); | 
 | 		copied += len; | 
 | 	} | 
 |  | 
 | 	be_tx_setup_wrb_hdr(adapter, txo, wrb_params, skb, head); | 
 |  | 
 | 	be_tx_stats_update(txo, skb); | 
 | 	return wrb_cnt; | 
 |  | 
 | dma_err: | 
 | 	adapter->drv_stats.dma_map_errors++; | 
 | 	be_xmit_restore(adapter, txo, head, map_single, copied); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static inline int qnq_async_evt_rcvd(struct be_adapter *adapter) | 
 | { | 
 | 	return adapter->flags & BE_FLAGS_QNQ_ASYNC_EVT_RCVD; | 
 | } | 
 |  | 
 | static struct sk_buff *be_insert_vlan_in_pkt(struct be_adapter *adapter, | 
 | 					     struct sk_buff *skb, | 
 | 					     struct be_wrb_params | 
 | 					     *wrb_params) | 
 | { | 
 | 	u16 vlan_tag = 0; | 
 |  | 
 | 	skb = skb_share_check(skb, GFP_ATOMIC); | 
 | 	if (unlikely(!skb)) | 
 | 		return skb; | 
 |  | 
 | 	if (skb_vlan_tag_present(skb)) | 
 | 		vlan_tag = be_get_tx_vlan_tag(adapter, skb); | 
 |  | 
 | 	if (qnq_async_evt_rcvd(adapter) && adapter->pvid) { | 
 | 		if (!vlan_tag) | 
 | 			vlan_tag = adapter->pvid; | 
 | 		/* f/w workaround to set skip_hw_vlan = 1, informs the F/W to | 
 | 		 * skip VLAN insertion | 
 | 		 */ | 
 | 		BE_WRB_F_SET(wrb_params->features, VLAN_SKIP_HW, 1); | 
 | 	} | 
 |  | 
 | 	if (vlan_tag) { | 
 | 		skb = vlan_insert_tag_set_proto(skb, htons(ETH_P_8021Q), | 
 | 						vlan_tag); | 
 | 		if (unlikely(!skb)) | 
 | 			return skb; | 
 | 		skb->vlan_tci = 0; | 
 | 	} | 
 |  | 
 | 	/* Insert the outer VLAN, if any */ | 
 | 	if (adapter->qnq_vid) { | 
 | 		vlan_tag = adapter->qnq_vid; | 
 | 		skb = vlan_insert_tag_set_proto(skb, htons(ETH_P_8021Q), | 
 | 						vlan_tag); | 
 | 		if (unlikely(!skb)) | 
 | 			return skb; | 
 | 		BE_WRB_F_SET(wrb_params->features, VLAN_SKIP_HW, 1); | 
 | 	} | 
 |  | 
 | 	return skb; | 
 | } | 
 |  | 
 | static bool be_ipv6_exthdr_check(struct sk_buff *skb) | 
 | { | 
 | 	struct ethhdr *eh = (struct ethhdr *)skb->data; | 
 | 	u16 offset = ETH_HLEN; | 
 |  | 
 | 	if (eh->h_proto == htons(ETH_P_IPV6)) { | 
 | 		struct ipv6hdr *ip6h = (struct ipv6hdr *)(skb->data + offset); | 
 |  | 
 | 		offset += sizeof(struct ipv6hdr); | 
 | 		if (ip6h->nexthdr != NEXTHDR_TCP && | 
 | 		    ip6h->nexthdr != NEXTHDR_UDP) { | 
 | 			struct ipv6_opt_hdr *ehdr = | 
 | 				(struct ipv6_opt_hdr *)(skb->data + offset); | 
 |  | 
 | 			/* offending pkt: 2nd byte following IPv6 hdr is 0xff */ | 
 | 			if (ehdr->hdrlen == 0xff) | 
 | 				return true; | 
 | 		} | 
 | 	} | 
 | 	return false; | 
 | } | 
 |  | 
 | static int be_vlan_tag_tx_chk(struct be_adapter *adapter, struct sk_buff *skb) | 
 | { | 
 | 	return skb_vlan_tag_present(skb) || adapter->pvid || adapter->qnq_vid; | 
 | } | 
 |  | 
 | static int be_ipv6_tx_stall_chk(struct be_adapter *adapter, struct sk_buff *skb) | 
 | { | 
 | 	return BE3_chip(adapter) && be_ipv6_exthdr_check(skb); | 
 | } | 
 |  | 
 | static struct sk_buff *be_lancer_xmit_workarounds(struct be_adapter *adapter, | 
 | 						  struct sk_buff *skb, | 
 | 						  struct be_wrb_params | 
 | 						  *wrb_params) | 
 | { | 
 | 	struct vlan_ethhdr *veh = (struct vlan_ethhdr *)skb->data; | 
 | 	unsigned int eth_hdr_len; | 
 | 	struct iphdr *ip; | 
 |  | 
 | 	/* For padded packets, BE HW modifies tot_len field in IP header | 
 | 	 * incorrecly when VLAN tag is inserted by HW. | 
 | 	 * For padded packets, Lancer computes incorrect checksum. | 
 | 	 */ | 
 | 	eth_hdr_len = ntohs(skb->protocol) == ETH_P_8021Q ? | 
 | 						VLAN_ETH_HLEN : ETH_HLEN; | 
 | 	if (skb->len <= 60 && | 
 | 	    (lancer_chip(adapter) || skb_vlan_tag_present(skb)) && | 
 | 	    is_ipv4_pkt(skb)) { | 
 | 		ip = (struct iphdr *)ip_hdr(skb); | 
 | 		pskb_trim(skb, eth_hdr_len + ntohs(ip->tot_len)); | 
 | 	} | 
 |  | 
 | 	/* If vlan tag is already inlined in the packet, skip HW VLAN | 
 | 	 * tagging in pvid-tagging mode | 
 | 	 */ | 
 | 	if (be_pvid_tagging_enabled(adapter) && | 
 | 	    veh->h_vlan_proto == htons(ETH_P_8021Q)) | 
 | 		BE_WRB_F_SET(wrb_params->features, VLAN_SKIP_HW, 1); | 
 |  | 
 | 	/* HW has a bug wherein it will calculate CSUM for VLAN | 
 | 	 * pkts even though it is disabled. | 
 | 	 * Manually insert VLAN in pkt. | 
 | 	 */ | 
 | 	if (skb->ip_summed != CHECKSUM_PARTIAL && | 
 | 	    skb_vlan_tag_present(skb)) { | 
 | 		skb = be_insert_vlan_in_pkt(adapter, skb, wrb_params); | 
 | 		if (unlikely(!skb)) | 
 | 			goto err; | 
 | 	} | 
 |  | 
 | 	/* HW may lockup when VLAN HW tagging is requested on | 
 | 	 * certain ipv6 packets. Drop such pkts if the HW workaround to | 
 | 	 * skip HW tagging is not enabled by FW. | 
 | 	 */ | 
 | 	if (unlikely(be_ipv6_tx_stall_chk(adapter, skb) && | 
 | 		     (adapter->pvid || adapter->qnq_vid) && | 
 | 		     !qnq_async_evt_rcvd(adapter))) | 
 | 		goto tx_drop; | 
 |  | 
 | 	/* Manual VLAN tag insertion to prevent: | 
 | 	 * ASIC lockup when the ASIC inserts VLAN tag into | 
 | 	 * certain ipv6 packets. Insert VLAN tags in driver, | 
 | 	 * and set event, completion, vlan bits accordingly | 
 | 	 * in the Tx WRB. | 
 | 	 */ | 
 | 	if (be_ipv6_tx_stall_chk(adapter, skb) && | 
 | 	    be_vlan_tag_tx_chk(adapter, skb)) { | 
 | 		skb = be_insert_vlan_in_pkt(adapter, skb, wrb_params); | 
 | 		if (unlikely(!skb)) | 
 | 			goto err; | 
 | 	} | 
 |  | 
 | 	return skb; | 
 | tx_drop: | 
 | 	dev_kfree_skb_any(skb); | 
 | err: | 
 | 	return NULL; | 
 | } | 
 |  | 
 | static struct sk_buff *be_xmit_workarounds(struct be_adapter *adapter, | 
 | 					   struct sk_buff *skb, | 
 | 					   struct be_wrb_params *wrb_params) | 
 | { | 
 | 	int err; | 
 |  | 
 | 	/* Lancer, SH and BE3 in SRIOV mode have a bug wherein | 
 | 	 * packets that are 32b or less may cause a transmit stall | 
 | 	 * on that port. The workaround is to pad such packets | 
 | 	 * (len <= 32 bytes) to a minimum length of 36b. | 
 | 	 */ | 
 | 	if (skb->len <= 32) { | 
 | 		if (skb_put_padto(skb, 36)) | 
 | 			return NULL; | 
 | 	} | 
 |  | 
 | 	if (BEx_chip(adapter) || lancer_chip(adapter)) { | 
 | 		skb = be_lancer_xmit_workarounds(adapter, skb, wrb_params); | 
 | 		if (!skb) | 
 | 			return NULL; | 
 | 	} | 
 |  | 
 | 	/* The stack can send us skbs with length greater than | 
 | 	 * what the HW can handle. Trim the extra bytes. | 
 | 	 */ | 
 | 	WARN_ON_ONCE(skb->len > BE_MAX_GSO_SIZE); | 
 | 	err = pskb_trim(skb, BE_MAX_GSO_SIZE); | 
 | 	WARN_ON(err); | 
 |  | 
 | 	return skb; | 
 | } | 
 |  | 
 | static void be_xmit_flush(struct be_adapter *adapter, struct be_tx_obj *txo) | 
 | { | 
 | 	struct be_queue_info *txq = &txo->q; | 
 | 	struct be_eth_hdr_wrb *hdr = queue_index_node(txq, txo->last_req_hdr); | 
 |  | 
 | 	/* Mark the last request eventable if it hasn't been marked already */ | 
 | 	if (!(hdr->dw[2] & cpu_to_le32(TX_HDR_WRB_EVT))) | 
 | 		hdr->dw[2] |= cpu_to_le32(TX_HDR_WRB_EVT | TX_HDR_WRB_COMPL); | 
 |  | 
 | 	/* compose a dummy wrb if there are odd set of wrbs to notify */ | 
 | 	if (!lancer_chip(adapter) && (txo->pend_wrb_cnt & 1)) { | 
 | 		wrb_fill_dummy(queue_head_node(txq)); | 
 | 		queue_head_inc(txq); | 
 | 		atomic_inc(&txq->used); | 
 | 		txo->pend_wrb_cnt++; | 
 | 		hdr->dw[2] &= ~cpu_to_le32(TX_HDR_WRB_NUM_MASK << | 
 | 					   TX_HDR_WRB_NUM_SHIFT); | 
 | 		hdr->dw[2] |= cpu_to_le32((txo->last_req_wrb_cnt + 1) << | 
 | 					  TX_HDR_WRB_NUM_SHIFT); | 
 | 	} | 
 | 	be_txq_notify(adapter, txo, txo->pend_wrb_cnt); | 
 | 	txo->pend_wrb_cnt = 0; | 
 | } | 
 |  | 
 | /* OS2BMC related */ | 
 |  | 
 | #define DHCP_CLIENT_PORT	68 | 
 | #define DHCP_SERVER_PORT	67 | 
 | #define NET_BIOS_PORT1		137 | 
 | #define NET_BIOS_PORT2		138 | 
 | #define DHCPV6_RAS_PORT		547 | 
 |  | 
 | #define is_mc_allowed_on_bmc(adapter, eh)	\ | 
 | 	(!is_multicast_filt_enabled(adapter) &&	\ | 
 | 	 is_multicast_ether_addr(eh->h_dest) &&	\ | 
 | 	 !is_broadcast_ether_addr(eh->h_dest)) | 
 |  | 
 | #define is_bc_allowed_on_bmc(adapter, eh)	\ | 
 | 	(!is_broadcast_filt_enabled(adapter) &&	\ | 
 | 	 is_broadcast_ether_addr(eh->h_dest)) | 
 |  | 
 | #define is_arp_allowed_on_bmc(adapter, skb)	\ | 
 | 	(is_arp(skb) && is_arp_filt_enabled(adapter)) | 
 |  | 
 | #define is_broadcast_packet(eh, adapter)	\ | 
 | 		(is_multicast_ether_addr(eh->h_dest) && \ | 
 | 		!compare_ether_addr(eh->h_dest, adapter->netdev->broadcast)) | 
 |  | 
 | #define is_arp(skb)	(skb->protocol == htons(ETH_P_ARP)) | 
 |  | 
 | #define is_arp_filt_enabled(adapter)	\ | 
 | 		(adapter->bmc_filt_mask & (BMC_FILT_BROADCAST_ARP)) | 
 |  | 
 | #define is_dhcp_client_filt_enabled(adapter)	\ | 
 | 		(adapter->bmc_filt_mask & BMC_FILT_BROADCAST_DHCP_CLIENT) | 
 |  | 
 | #define is_dhcp_srvr_filt_enabled(adapter)	\ | 
 | 		(adapter->bmc_filt_mask & BMC_FILT_BROADCAST_DHCP_SERVER) | 
 |  | 
 | #define is_nbios_filt_enabled(adapter)	\ | 
 | 		(adapter->bmc_filt_mask & BMC_FILT_BROADCAST_NET_BIOS) | 
 |  | 
 | #define is_ipv6_na_filt_enabled(adapter)	\ | 
 | 		(adapter->bmc_filt_mask &	\ | 
 | 			BMC_FILT_MULTICAST_IPV6_NEIGH_ADVER) | 
 |  | 
 | #define is_ipv6_ra_filt_enabled(adapter)	\ | 
 | 		(adapter->bmc_filt_mask & BMC_FILT_MULTICAST_IPV6_RA) | 
 |  | 
 | #define is_ipv6_ras_filt_enabled(adapter)	\ | 
 | 		(adapter->bmc_filt_mask & BMC_FILT_MULTICAST_IPV6_RAS) | 
 |  | 
 | #define is_broadcast_filt_enabled(adapter)	\ | 
 | 		(adapter->bmc_filt_mask & BMC_FILT_BROADCAST) | 
 |  | 
 | #define is_multicast_filt_enabled(adapter)	\ | 
 | 		(adapter->bmc_filt_mask & BMC_FILT_MULTICAST) | 
 |  | 
 | static bool be_send_pkt_to_bmc(struct be_adapter *adapter, | 
 | 			       struct sk_buff **skb) | 
 | { | 
 | 	struct ethhdr *eh = (struct ethhdr *)(*skb)->data; | 
 | 	bool os2bmc = false; | 
 |  | 
 | 	if (!be_is_os2bmc_enabled(adapter)) | 
 | 		goto done; | 
 |  | 
 | 	if (!is_multicast_ether_addr(eh->h_dest)) | 
 | 		goto done; | 
 |  | 
 | 	if (is_mc_allowed_on_bmc(adapter, eh) || | 
 | 	    is_bc_allowed_on_bmc(adapter, eh) || | 
 | 	    is_arp_allowed_on_bmc(adapter, (*skb))) { | 
 | 		os2bmc = true; | 
 | 		goto done; | 
 | 	} | 
 |  | 
 | 	if ((*skb)->protocol == htons(ETH_P_IPV6)) { | 
 | 		struct ipv6hdr *hdr = ipv6_hdr((*skb)); | 
 | 		u8 nexthdr = hdr->nexthdr; | 
 |  | 
 | 		if (nexthdr == IPPROTO_ICMPV6) { | 
 | 			struct icmp6hdr *icmp6 = icmp6_hdr((*skb)); | 
 |  | 
 | 			switch (icmp6->icmp6_type) { | 
 | 			case NDISC_ROUTER_ADVERTISEMENT: | 
 | 				os2bmc = is_ipv6_ra_filt_enabled(adapter); | 
 | 				goto done; | 
 | 			case NDISC_NEIGHBOUR_ADVERTISEMENT: | 
 | 				os2bmc = is_ipv6_na_filt_enabled(adapter); | 
 | 				goto done; | 
 | 			default: | 
 | 				break; | 
 | 			} | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (is_udp_pkt((*skb))) { | 
 | 		struct udphdr *udp = udp_hdr((*skb)); | 
 |  | 
 | 		switch (ntohs(udp->dest)) { | 
 | 		case DHCP_CLIENT_PORT: | 
 | 			os2bmc = is_dhcp_client_filt_enabled(adapter); | 
 | 			goto done; | 
 | 		case DHCP_SERVER_PORT: | 
 | 			os2bmc = is_dhcp_srvr_filt_enabled(adapter); | 
 | 			goto done; | 
 | 		case NET_BIOS_PORT1: | 
 | 		case NET_BIOS_PORT2: | 
 | 			os2bmc = is_nbios_filt_enabled(adapter); | 
 | 			goto done; | 
 | 		case DHCPV6_RAS_PORT: | 
 | 			os2bmc = is_ipv6_ras_filt_enabled(adapter); | 
 | 			goto done; | 
 | 		default: | 
 | 			break; | 
 | 		} | 
 | 	} | 
 | done: | 
 | 	/* For packets over a vlan, which are destined | 
 | 	 * to BMC, asic expects the vlan to be inline in the packet. | 
 | 	 */ | 
 | 	if (os2bmc) | 
 | 		*skb = be_insert_vlan_in_pkt(adapter, *skb, NULL); | 
 |  | 
 | 	return os2bmc; | 
 | } | 
 |  | 
 | static netdev_tx_t be_xmit(struct sk_buff *skb, struct net_device *netdev) | 
 | { | 
 | 	struct be_adapter *adapter = netdev_priv(netdev); | 
 | 	u16 q_idx = skb_get_queue_mapping(skb); | 
 | 	struct be_tx_obj *txo = &adapter->tx_obj[q_idx]; | 
 | 	struct be_wrb_params wrb_params = { 0 }; | 
 | 	bool flush = !skb->xmit_more; | 
 | 	u16 wrb_cnt; | 
 |  | 
 | 	skb = be_xmit_workarounds(adapter, skb, &wrb_params); | 
 | 	if (unlikely(!skb)) | 
 | 		goto drop; | 
 |  | 
 | 	be_get_wrb_params_from_skb(adapter, skb, &wrb_params); | 
 |  | 
 | 	wrb_cnt = be_xmit_enqueue(adapter, txo, skb, &wrb_params); | 
 | 	if (unlikely(!wrb_cnt)) { | 
 | 		dev_kfree_skb_any(skb); | 
 | 		goto drop; | 
 | 	} | 
 |  | 
 | 	/* if os2bmc is enabled and if the pkt is destined to bmc, | 
 | 	 * enqueue the pkt a 2nd time with mgmt bit set. | 
 | 	 */ | 
 | 	if (be_send_pkt_to_bmc(adapter, &skb)) { | 
 | 		BE_WRB_F_SET(wrb_params.features, OS2BMC, 1); | 
 | 		wrb_cnt = be_xmit_enqueue(adapter, txo, skb, &wrb_params); | 
 | 		if (unlikely(!wrb_cnt)) | 
 | 			goto drop; | 
 | 		else | 
 | 			skb_get(skb); | 
 | 	} | 
 |  | 
 | 	if (be_is_txq_full(txo)) { | 
 | 		netif_stop_subqueue(netdev, q_idx); | 
 | 		tx_stats(txo)->tx_stops++; | 
 | 	} | 
 |  | 
 | 	if (flush || __netif_subqueue_stopped(netdev, q_idx)) | 
 | 		be_xmit_flush(adapter, txo); | 
 |  | 
 | 	return NETDEV_TX_OK; | 
 | drop: | 
 | 	tx_stats(txo)->tx_drv_drops++; | 
 | 	/* Flush the already enqueued tx requests */ | 
 | 	if (flush && txo->pend_wrb_cnt) | 
 | 		be_xmit_flush(adapter, txo); | 
 |  | 
 | 	return NETDEV_TX_OK; | 
 | } | 
 |  | 
 | static inline bool be_in_all_promisc(struct be_adapter *adapter) | 
 | { | 
 | 	return (adapter->if_flags & BE_IF_FLAGS_ALL_PROMISCUOUS) == | 
 | 			BE_IF_FLAGS_ALL_PROMISCUOUS; | 
 | } | 
 |  | 
 | static int be_set_vlan_promisc(struct be_adapter *adapter) | 
 | { | 
 | 	struct device *dev = &adapter->pdev->dev; | 
 | 	int status; | 
 |  | 
 | 	if (adapter->if_flags & BE_IF_FLAGS_VLAN_PROMISCUOUS) | 
 | 		return 0; | 
 |  | 
 | 	status = be_cmd_rx_filter(adapter, BE_IF_FLAGS_VLAN_PROMISCUOUS, ON); | 
 | 	if (!status) { | 
 | 		dev_info(dev, "Enabled VLAN promiscuous mode\n"); | 
 | 		adapter->if_flags |= BE_IF_FLAGS_VLAN_PROMISCUOUS; | 
 | 	} else { | 
 | 		dev_err(dev, "Failed to enable VLAN promiscuous mode\n"); | 
 | 	} | 
 | 	return status; | 
 | } | 
 |  | 
 | static int be_clear_vlan_promisc(struct be_adapter *adapter) | 
 | { | 
 | 	struct device *dev = &adapter->pdev->dev; | 
 | 	int status; | 
 |  | 
 | 	status = be_cmd_rx_filter(adapter, BE_IF_FLAGS_VLAN_PROMISCUOUS, OFF); | 
 | 	if (!status) { | 
 | 		dev_info(dev, "Disabling VLAN promiscuous mode\n"); | 
 | 		adapter->if_flags &= ~BE_IF_FLAGS_VLAN_PROMISCUOUS; | 
 | 	} | 
 | 	return status; | 
 | } | 
 |  | 
 | /* | 
 |  * A max of 64 (BE_NUM_VLANS_SUPPORTED) vlans can be configured in BE. | 
 |  * If the user configures more, place BE in vlan promiscuous mode. | 
 |  */ | 
 | static int be_vid_config(struct be_adapter *adapter) | 
 | { | 
 | 	struct device *dev = &adapter->pdev->dev; | 
 | 	u16 vids[BE_NUM_VLANS_SUPPORTED]; | 
 | 	u16 num = 0, i = 0; | 
 | 	int status = 0; | 
 |  | 
 | 	/* No need to change the VLAN state if the I/F is in promiscuous */ | 
 | 	if (adapter->netdev->flags & IFF_PROMISC) | 
 | 		return 0; | 
 |  | 
 | 	if (adapter->vlans_added > be_max_vlans(adapter)) | 
 | 		return be_set_vlan_promisc(adapter); | 
 |  | 
 | 	if (adapter->if_flags & BE_IF_FLAGS_VLAN_PROMISCUOUS) { | 
 | 		status = be_clear_vlan_promisc(adapter); | 
 | 		if (status) | 
 | 			return status; | 
 | 	} | 
 | 	/* Construct VLAN Table to give to HW */ | 
 | 	for_each_set_bit(i, adapter->vids, VLAN_N_VID) | 
 | 		vids[num++] = cpu_to_le16(i); | 
 |  | 
 | 	status = be_cmd_vlan_config(adapter, adapter->if_handle, vids, num, 0); | 
 | 	if (status) { | 
 | 		dev_err(dev, "Setting HW VLAN filtering failed\n"); | 
 | 		/* Set to VLAN promisc mode as setting VLAN filter failed */ | 
 | 		if (addl_status(status) == MCC_ADDL_STATUS_INSUFFICIENT_VLANS || | 
 | 		    addl_status(status) == | 
 | 				MCC_ADDL_STATUS_INSUFFICIENT_RESOURCES) | 
 | 			return be_set_vlan_promisc(adapter); | 
 | 	} | 
 | 	return status; | 
 | } | 
 |  | 
 | static int be_vlan_add_vid(struct net_device *netdev, __be16 proto, u16 vid) | 
 | { | 
 | 	struct be_adapter *adapter = netdev_priv(netdev); | 
 | 	int status = 0; | 
 |  | 
 | 	mutex_lock(&adapter->rx_filter_lock); | 
 |  | 
 | 	/* Packets with VID 0 are always received by Lancer by default */ | 
 | 	if (lancer_chip(adapter) && vid == 0) | 
 | 		goto done; | 
 |  | 
 | 	if (test_bit(vid, adapter->vids)) | 
 | 		goto done; | 
 |  | 
 | 	set_bit(vid, adapter->vids); | 
 | 	adapter->vlans_added++; | 
 |  | 
 | 	status = be_vid_config(adapter); | 
 | done: | 
 | 	mutex_unlock(&adapter->rx_filter_lock); | 
 | 	return status; | 
 | } | 
 |  | 
 | static int be_vlan_rem_vid(struct net_device *netdev, __be16 proto, u16 vid) | 
 | { | 
 | 	struct be_adapter *adapter = netdev_priv(netdev); | 
 | 	int status = 0; | 
 |  | 
 | 	mutex_lock(&adapter->rx_filter_lock); | 
 |  | 
 | 	/* Packets with VID 0 are always received by Lancer by default */ | 
 | 	if (lancer_chip(adapter) && vid == 0) | 
 | 		goto done; | 
 |  | 
 | 	if (!test_bit(vid, adapter->vids)) | 
 | 		goto done; | 
 |  | 
 | 	clear_bit(vid, adapter->vids); | 
 | 	adapter->vlans_added--; | 
 |  | 
 | 	status = be_vid_config(adapter); | 
 | done: | 
 | 	mutex_unlock(&adapter->rx_filter_lock); | 
 | 	return status; | 
 | } | 
 |  | 
 | static void be_set_all_promisc(struct be_adapter *adapter) | 
 | { | 
 | 	be_cmd_rx_filter(adapter, BE_IF_FLAGS_ALL_PROMISCUOUS, ON); | 
 | 	adapter->if_flags |= BE_IF_FLAGS_ALL_PROMISCUOUS; | 
 | } | 
 |  | 
 | static void be_set_mc_promisc(struct be_adapter *adapter) | 
 | { | 
 | 	int status; | 
 |  | 
 | 	if (adapter->if_flags & BE_IF_FLAGS_MCAST_PROMISCUOUS) | 
 | 		return; | 
 |  | 
 | 	status = be_cmd_rx_filter(adapter, BE_IF_FLAGS_MCAST_PROMISCUOUS, ON); | 
 | 	if (!status) | 
 | 		adapter->if_flags |= BE_IF_FLAGS_MCAST_PROMISCUOUS; | 
 | } | 
 |  | 
 | static void be_set_uc_promisc(struct be_adapter *adapter) | 
 | { | 
 | 	int status; | 
 |  | 
 | 	if (adapter->if_flags & BE_IF_FLAGS_PROMISCUOUS) | 
 | 		return; | 
 |  | 
 | 	status = be_cmd_rx_filter(adapter, BE_IF_FLAGS_PROMISCUOUS, ON); | 
 | 	if (!status) | 
 | 		adapter->if_flags |= BE_IF_FLAGS_PROMISCUOUS; | 
 | } | 
 |  | 
 | static void be_clear_uc_promisc(struct be_adapter *adapter) | 
 | { | 
 | 	int status; | 
 |  | 
 | 	if (!(adapter->if_flags & BE_IF_FLAGS_PROMISCUOUS)) | 
 | 		return; | 
 |  | 
 | 	status = be_cmd_rx_filter(adapter, BE_IF_FLAGS_PROMISCUOUS, OFF); | 
 | 	if (!status) | 
 | 		adapter->if_flags &= ~BE_IF_FLAGS_PROMISCUOUS; | 
 | } | 
 |  | 
 | /* The below 2 functions are the callback args for __dev_mc_sync/dev_uc_sync(). | 
 |  * We use a single callback function for both sync and unsync. We really don't | 
 |  * add/remove addresses through this callback. But, we use it to detect changes | 
 |  * to the uc/mc lists. The entire uc/mc list is programmed in be_set_rx_mode(). | 
 |  */ | 
 | static int be_uc_list_update(struct net_device *netdev, | 
 | 			     const unsigned char *addr) | 
 | { | 
 | 	struct be_adapter *adapter = netdev_priv(netdev); | 
 |  | 
 | 	adapter->update_uc_list = true; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int be_mc_list_update(struct net_device *netdev, | 
 | 			     const unsigned char *addr) | 
 | { | 
 | 	struct be_adapter *adapter = netdev_priv(netdev); | 
 |  | 
 | 	adapter->update_mc_list = true; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void be_set_mc_list(struct be_adapter *adapter) | 
 | { | 
 | 	struct net_device *netdev = adapter->netdev; | 
 | 	struct netdev_hw_addr *ha; | 
 | 	bool mc_promisc = false; | 
 | 	int status; | 
 |  | 
 | 	netif_addr_lock_bh(netdev); | 
 | 	__dev_mc_sync(netdev, be_mc_list_update, be_mc_list_update); | 
 |  | 
 | 	if (netdev->flags & IFF_PROMISC) { | 
 | 		adapter->update_mc_list = false; | 
 | 	} else if (netdev->flags & IFF_ALLMULTI || | 
 | 		   netdev_mc_count(netdev) > be_max_mc(adapter)) { | 
 | 		/* Enable multicast promisc if num configured exceeds | 
 | 		 * what we support | 
 | 		 */ | 
 | 		mc_promisc = true; | 
 | 		adapter->update_mc_list = false; | 
 | 	} else if (adapter->if_flags & BE_IF_FLAGS_MCAST_PROMISCUOUS) { | 
 | 		/* Update mc-list unconditionally if the iface was previously | 
 | 		 * in mc-promisc mode and now is out of that mode. | 
 | 		 */ | 
 | 		adapter->update_mc_list = true; | 
 | 	} | 
 |  | 
 | 	if (adapter->update_mc_list) { | 
 | 		int i = 0; | 
 |  | 
 | 		/* cache the mc-list in adapter */ | 
 | 		netdev_for_each_mc_addr(ha, netdev) { | 
 | 			ether_addr_copy(adapter->mc_list[i].mac, ha->addr); | 
 | 			i++; | 
 | 		} | 
 | 		adapter->mc_count = netdev_mc_count(netdev); | 
 | 	} | 
 | 	netif_addr_unlock_bh(netdev); | 
 |  | 
 | 	if (mc_promisc) { | 
 | 		be_set_mc_promisc(adapter); | 
 | 	} else if (adapter->update_mc_list) { | 
 | 		status = be_cmd_rx_filter(adapter, BE_IF_FLAGS_MULTICAST, ON); | 
 | 		if (!status) | 
 | 			adapter->if_flags &= ~BE_IF_FLAGS_MCAST_PROMISCUOUS; | 
 | 		else | 
 | 			be_set_mc_promisc(adapter); | 
 |  | 
 | 		adapter->update_mc_list = false; | 
 | 	} | 
 | } | 
 |  | 
 | static void be_clear_mc_list(struct be_adapter *adapter) | 
 | { | 
 | 	struct net_device *netdev = adapter->netdev; | 
 |  | 
 | 	__dev_mc_unsync(netdev, NULL); | 
 | 	be_cmd_rx_filter(adapter, BE_IF_FLAGS_MULTICAST, OFF); | 
 | 	adapter->mc_count = 0; | 
 | } | 
 |  | 
 | static int be_uc_mac_add(struct be_adapter *adapter, int uc_idx) | 
 | { | 
 | 	if (ether_addr_equal(adapter->uc_list[uc_idx].mac, adapter->dev_mac)) { | 
 | 		adapter->pmac_id[uc_idx + 1] = adapter->pmac_id[0]; | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	return be_cmd_pmac_add(adapter, adapter->uc_list[uc_idx].mac, | 
 | 			       adapter->if_handle, | 
 | 			       &adapter->pmac_id[uc_idx + 1], 0); | 
 | } | 
 |  | 
 | static void be_uc_mac_del(struct be_adapter *adapter, int pmac_id) | 
 | { | 
 | 	if (pmac_id == adapter->pmac_id[0]) | 
 | 		return; | 
 |  | 
 | 	be_cmd_pmac_del(adapter, adapter->if_handle, pmac_id, 0); | 
 | } | 
 |  | 
 | static void be_set_uc_list(struct be_adapter *adapter) | 
 | { | 
 | 	struct net_device *netdev = adapter->netdev; | 
 | 	struct netdev_hw_addr *ha; | 
 | 	bool uc_promisc = false; | 
 | 	int curr_uc_macs = 0, i; | 
 |  | 
 | 	netif_addr_lock_bh(netdev); | 
 | 	__dev_uc_sync(netdev, be_uc_list_update, be_uc_list_update); | 
 |  | 
 | 	if (netdev->flags & IFF_PROMISC) { | 
 | 		adapter->update_uc_list = false; | 
 | 	} else if (netdev_uc_count(netdev) > (be_max_uc(adapter) - 1)) { | 
 | 		uc_promisc = true; | 
 | 		adapter->update_uc_list = false; | 
 | 	}  else if (adapter->if_flags & BE_IF_FLAGS_PROMISCUOUS) { | 
 | 		/* Update uc-list unconditionally if the iface was previously | 
 | 		 * in uc-promisc mode and now is out of that mode. | 
 | 		 */ | 
 | 		adapter->update_uc_list = true; | 
 | 	} | 
 |  | 
 | 	if (adapter->update_uc_list) { | 
 | 		/* cache the uc-list in adapter array */ | 
 | 		i = 0; | 
 | 		netdev_for_each_uc_addr(ha, netdev) { | 
 | 			ether_addr_copy(adapter->uc_list[i].mac, ha->addr); | 
 | 			i++; | 
 | 		} | 
 | 		curr_uc_macs = netdev_uc_count(netdev); | 
 | 	} | 
 | 	netif_addr_unlock_bh(netdev); | 
 |  | 
 | 	if (uc_promisc) { | 
 | 		be_set_uc_promisc(adapter); | 
 | 	} else if (adapter->update_uc_list) { | 
 | 		be_clear_uc_promisc(adapter); | 
 |  | 
 | 		for (i = 0; i < adapter->uc_macs; i++) | 
 | 			be_uc_mac_del(adapter, adapter->pmac_id[i + 1]); | 
 |  | 
 | 		for (i = 0; i < curr_uc_macs; i++) | 
 | 			be_uc_mac_add(adapter, i); | 
 | 		adapter->uc_macs = curr_uc_macs; | 
 | 		adapter->update_uc_list = false; | 
 | 	} | 
 | } | 
 |  | 
 | static void be_clear_uc_list(struct be_adapter *adapter) | 
 | { | 
 | 	struct net_device *netdev = adapter->netdev; | 
 | 	int i; | 
 |  | 
 | 	__dev_uc_unsync(netdev, NULL); | 
 | 	for (i = 0; i < adapter->uc_macs; i++) | 
 | 		be_uc_mac_del(adapter, adapter->pmac_id[i + 1]); | 
 |  | 
 | 	adapter->uc_macs = 0; | 
 | } | 
 |  | 
 | static void __be_set_rx_mode(struct be_adapter *adapter) | 
 | { | 
 | 	struct net_device *netdev = adapter->netdev; | 
 |  | 
 | 	mutex_lock(&adapter->rx_filter_lock); | 
 |  | 
 | 	if (netdev->flags & IFF_PROMISC) { | 
 | 		if (!be_in_all_promisc(adapter)) | 
 | 			be_set_all_promisc(adapter); | 
 | 	} else if (be_in_all_promisc(adapter)) { | 
 | 		/* We need to re-program the vlan-list or clear | 
 | 		 * vlan-promisc mode (if needed) when the interface | 
 | 		 * comes out of promisc mode. | 
 | 		 */ | 
 | 		be_vid_config(adapter); | 
 | 	} | 
 |  | 
 | 	be_set_uc_list(adapter); | 
 | 	be_set_mc_list(adapter); | 
 |  | 
 | 	mutex_unlock(&adapter->rx_filter_lock); | 
 | } | 
 |  | 
 | static void be_work_set_rx_mode(struct work_struct *work) | 
 | { | 
 | 	struct be_cmd_work *cmd_work = | 
 | 				container_of(work, struct be_cmd_work, work); | 
 |  | 
 | 	__be_set_rx_mode(cmd_work->adapter); | 
 | 	kfree(cmd_work); | 
 | } | 
 |  | 
 | static int be_set_vf_mac(struct net_device *netdev, int vf, u8 *mac) | 
 | { | 
 | 	struct be_adapter *adapter = netdev_priv(netdev); | 
 | 	struct be_vf_cfg *vf_cfg = &adapter->vf_cfg[vf]; | 
 | 	int status; | 
 |  | 
 | 	if (!sriov_enabled(adapter)) | 
 | 		return -EPERM; | 
 |  | 
 | 	if (!is_valid_ether_addr(mac) || vf >= adapter->num_vfs) | 
 | 		return -EINVAL; | 
 |  | 
 | 	/* Proceed further only if user provided MAC is different | 
 | 	 * from active MAC | 
 | 	 */ | 
 | 	if (ether_addr_equal(mac, vf_cfg->mac_addr)) | 
 | 		return 0; | 
 |  | 
 | 	if (BEx_chip(adapter)) { | 
 | 		be_cmd_pmac_del(adapter, vf_cfg->if_handle, vf_cfg->pmac_id, | 
 | 				vf + 1); | 
 |  | 
 | 		status = be_cmd_pmac_add(adapter, mac, vf_cfg->if_handle, | 
 | 					 &vf_cfg->pmac_id, vf + 1); | 
 | 	} else { | 
 | 		status = be_cmd_set_mac(adapter, mac, vf_cfg->if_handle, | 
 | 					vf + 1); | 
 | 	} | 
 |  | 
 | 	if (status) { | 
 | 		dev_err(&adapter->pdev->dev, "MAC %pM set on VF %d Failed: %#x", | 
 | 			mac, vf, status); | 
 | 		return be_cmd_status(status); | 
 | 	} | 
 |  | 
 | 	ether_addr_copy(vf_cfg->mac_addr, mac); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int be_get_vf_config(struct net_device *netdev, int vf, | 
 | 			    struct ifla_vf_info *vi) | 
 | { | 
 | 	struct be_adapter *adapter = netdev_priv(netdev); | 
 | 	struct be_vf_cfg *vf_cfg = &adapter->vf_cfg[vf]; | 
 |  | 
 | 	if (!sriov_enabled(adapter)) | 
 | 		return -EPERM; | 
 |  | 
 | 	if (vf >= adapter->num_vfs) | 
 | 		return -EINVAL; | 
 |  | 
 | 	vi->vf = vf; | 
 | 	vi->max_tx_rate = vf_cfg->tx_rate; | 
 | 	vi->min_tx_rate = 0; | 
 | 	vi->vlan = vf_cfg->vlan_tag & VLAN_VID_MASK; | 
 | 	vi->qos = vf_cfg->vlan_tag >> VLAN_PRIO_SHIFT; | 
 | 	memcpy(&vi->mac, vf_cfg->mac_addr, ETH_ALEN); | 
 | 	vi->linkstate = adapter->vf_cfg[vf].plink_tracking; | 
 | 	vi->spoofchk = adapter->vf_cfg[vf].spoofchk; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int be_set_vf_tvt(struct be_adapter *adapter, int vf, u16 vlan) | 
 | { | 
 | 	struct be_vf_cfg *vf_cfg = &adapter->vf_cfg[vf]; | 
 | 	u16 vids[BE_NUM_VLANS_SUPPORTED]; | 
 | 	int vf_if_id = vf_cfg->if_handle; | 
 | 	int status; | 
 |  | 
 | 	/* Enable Transparent VLAN Tagging */ | 
 | 	status = be_cmd_set_hsw_config(adapter, vlan, vf + 1, vf_if_id, 0, 0); | 
 | 	if (status) | 
 | 		return status; | 
 |  | 
 | 	/* Clear pre-programmed VLAN filters on VF if any, if TVT is enabled */ | 
 | 	vids[0] = 0; | 
 | 	status = be_cmd_vlan_config(adapter, vf_if_id, vids, 1, vf + 1); | 
 | 	if (!status) | 
 | 		dev_info(&adapter->pdev->dev, | 
 | 			 "Cleared guest VLANs on VF%d", vf); | 
 |  | 
 | 	/* After TVT is enabled, disallow VFs to program VLAN filters */ | 
 | 	if (vf_cfg->privileges & BE_PRIV_FILTMGMT) { | 
 | 		status = be_cmd_set_fn_privileges(adapter, vf_cfg->privileges & | 
 | 						  ~BE_PRIV_FILTMGMT, vf + 1); | 
 | 		if (!status) | 
 | 			vf_cfg->privileges &= ~BE_PRIV_FILTMGMT; | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int be_clear_vf_tvt(struct be_adapter *adapter, int vf) | 
 | { | 
 | 	struct be_vf_cfg *vf_cfg = &adapter->vf_cfg[vf]; | 
 | 	struct device *dev = &adapter->pdev->dev; | 
 | 	int status; | 
 |  | 
 | 	/* Reset Transparent VLAN Tagging. */ | 
 | 	status = be_cmd_set_hsw_config(adapter, BE_RESET_VLAN_TAG_ID, vf + 1, | 
 | 				       vf_cfg->if_handle, 0, 0); | 
 | 	if (status) | 
 | 		return status; | 
 |  | 
 | 	/* Allow VFs to program VLAN filtering */ | 
 | 	if (!(vf_cfg->privileges & BE_PRIV_FILTMGMT)) { | 
 | 		status = be_cmd_set_fn_privileges(adapter, vf_cfg->privileges | | 
 | 						  BE_PRIV_FILTMGMT, vf + 1); | 
 | 		if (!status) { | 
 | 			vf_cfg->privileges |= BE_PRIV_FILTMGMT; | 
 | 			dev_info(dev, "VF%d: FILTMGMT priv enabled", vf); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	dev_info(dev, | 
 | 		 "Disable/re-enable i/f in VM to clear Transparent VLAN tag"); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int be_set_vf_vlan(struct net_device *netdev, int vf, u16 vlan, u8 qos, | 
 | 			  __be16 vlan_proto) | 
 | { | 
 | 	struct be_adapter *adapter = netdev_priv(netdev); | 
 | 	struct be_vf_cfg *vf_cfg = &adapter->vf_cfg[vf]; | 
 | 	int status; | 
 |  | 
 | 	if (!sriov_enabled(adapter)) | 
 | 		return -EPERM; | 
 |  | 
 | 	if (vf >= adapter->num_vfs || vlan > 4095 || qos > 7) | 
 | 		return -EINVAL; | 
 |  | 
 | 	if (vlan_proto != htons(ETH_P_8021Q)) | 
 | 		return -EPROTONOSUPPORT; | 
 |  | 
 | 	if (vlan || qos) { | 
 | 		vlan |= qos << VLAN_PRIO_SHIFT; | 
 | 		status = be_set_vf_tvt(adapter, vf, vlan); | 
 | 	} else { | 
 | 		status = be_clear_vf_tvt(adapter, vf); | 
 | 	} | 
 |  | 
 | 	if (status) { | 
 | 		dev_err(&adapter->pdev->dev, | 
 | 			"VLAN %d config on VF %d failed : %#x\n", vlan, vf, | 
 | 			status); | 
 | 		return be_cmd_status(status); | 
 | 	} | 
 |  | 
 | 	vf_cfg->vlan_tag = vlan; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int be_set_vf_tx_rate(struct net_device *netdev, int vf, | 
 | 			     int min_tx_rate, int max_tx_rate) | 
 | { | 
 | 	struct be_adapter *adapter = netdev_priv(netdev); | 
 | 	struct device *dev = &adapter->pdev->dev; | 
 | 	int percent_rate, status = 0; | 
 | 	u16 link_speed = 0; | 
 | 	u8 link_status; | 
 |  | 
 | 	if (!sriov_enabled(adapter)) | 
 | 		return -EPERM; | 
 |  | 
 | 	if (vf >= adapter->num_vfs) | 
 | 		return -EINVAL; | 
 |  | 
 | 	if (min_tx_rate) | 
 | 		return -EINVAL; | 
 |  | 
 | 	if (!max_tx_rate) | 
 | 		goto config_qos; | 
 |  | 
 | 	status = be_cmd_link_status_query(adapter, &link_speed, | 
 | 					  &link_status, 0); | 
 | 	if (status) | 
 | 		goto err; | 
 |  | 
 | 	if (!link_status) { | 
 | 		dev_err(dev, "TX-rate setting not allowed when link is down\n"); | 
 | 		status = -ENETDOWN; | 
 | 		goto err; | 
 | 	} | 
 |  | 
 | 	if (max_tx_rate < 100 || max_tx_rate > link_speed) { | 
 | 		dev_err(dev, "TX-rate must be between 100 and %d Mbps\n", | 
 | 			link_speed); | 
 | 		status = -EINVAL; | 
 | 		goto err; | 
 | 	} | 
 |  | 
 | 	/* On Skyhawk the QOS setting must be done only as a % value */ | 
 | 	percent_rate = link_speed / 100; | 
 | 	if (skyhawk_chip(adapter) && (max_tx_rate % percent_rate)) { | 
 | 		dev_err(dev, "TX-rate must be a multiple of %d Mbps\n", | 
 | 			percent_rate); | 
 | 		status = -EINVAL; | 
 | 		goto err; | 
 | 	} | 
 |  | 
 | config_qos: | 
 | 	status = be_cmd_config_qos(adapter, max_tx_rate, link_speed, vf + 1); | 
 | 	if (status) | 
 | 		goto err; | 
 |  | 
 | 	adapter->vf_cfg[vf].tx_rate = max_tx_rate; | 
 | 	return 0; | 
 |  | 
 | err: | 
 | 	dev_err(dev, "TX-rate setting of %dMbps on VF%d failed\n", | 
 | 		max_tx_rate, vf); | 
 | 	return be_cmd_status(status); | 
 | } | 
 |  | 
 | static int be_set_vf_link_state(struct net_device *netdev, int vf, | 
 | 				int link_state) | 
 | { | 
 | 	struct be_adapter *adapter = netdev_priv(netdev); | 
 | 	int status; | 
 |  | 
 | 	if (!sriov_enabled(adapter)) | 
 | 		return -EPERM; | 
 |  | 
 | 	if (vf >= adapter->num_vfs) | 
 | 		return -EINVAL; | 
 |  | 
 | 	status = be_cmd_set_logical_link_config(adapter, link_state, vf+1); | 
 | 	if (status) { | 
 | 		dev_err(&adapter->pdev->dev, | 
 | 			"Link state change on VF %d failed: %#x\n", vf, status); | 
 | 		return be_cmd_status(status); | 
 | 	} | 
 |  | 
 | 	adapter->vf_cfg[vf].plink_tracking = link_state; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int be_set_vf_spoofchk(struct net_device *netdev, int vf, bool enable) | 
 | { | 
 | 	struct be_adapter *adapter = netdev_priv(netdev); | 
 | 	struct be_vf_cfg *vf_cfg = &adapter->vf_cfg[vf]; | 
 | 	u8 spoofchk; | 
 | 	int status; | 
 |  | 
 | 	if (!sriov_enabled(adapter)) | 
 | 		return -EPERM; | 
 |  | 
 | 	if (vf >= adapter->num_vfs) | 
 | 		return -EINVAL; | 
 |  | 
 | 	if (BEx_chip(adapter)) | 
 | 		return -EOPNOTSUPP; | 
 |  | 
 | 	if (enable == vf_cfg->spoofchk) | 
 | 		return 0; | 
 |  | 
 | 	spoofchk = enable ? ENABLE_MAC_SPOOFCHK : DISABLE_MAC_SPOOFCHK; | 
 |  | 
 | 	status = be_cmd_set_hsw_config(adapter, 0, vf + 1, vf_cfg->if_handle, | 
 | 				       0, spoofchk); | 
 | 	if (status) { | 
 | 		dev_err(&adapter->pdev->dev, | 
 | 			"Spoofchk change on VF %d failed: %#x\n", vf, status); | 
 | 		return be_cmd_status(status); | 
 | 	} | 
 |  | 
 | 	vf_cfg->spoofchk = enable; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void be_aic_update(struct be_aic_obj *aic, u64 rx_pkts, u64 tx_pkts, | 
 | 			  ulong now) | 
 | { | 
 | 	aic->rx_pkts_prev = rx_pkts; | 
 | 	aic->tx_reqs_prev = tx_pkts; | 
 | 	aic->jiffies = now; | 
 | } | 
 |  | 
 | static int be_get_new_eqd(struct be_eq_obj *eqo) | 
 | { | 
 | 	struct be_adapter *adapter = eqo->adapter; | 
 | 	int eqd, start; | 
 | 	struct be_aic_obj *aic; | 
 | 	struct be_rx_obj *rxo; | 
 | 	struct be_tx_obj *txo; | 
 | 	u64 rx_pkts = 0, tx_pkts = 0; | 
 | 	ulong now; | 
 | 	u32 pps, delta; | 
 | 	int i; | 
 |  | 
 | 	aic = &adapter->aic_obj[eqo->idx]; | 
 | 	if (!aic->enable) { | 
 | 		if (aic->jiffies) | 
 | 			aic->jiffies = 0; | 
 | 		eqd = aic->et_eqd; | 
 | 		return eqd; | 
 | 	} | 
 |  | 
 | 	for_all_rx_queues_on_eq(adapter, eqo, rxo, i) { | 
 | 		do { | 
 | 			start = u64_stats_fetch_begin_irq(&rxo->stats.sync); | 
 | 			rx_pkts += rxo->stats.rx_pkts; | 
 | 		} while (u64_stats_fetch_retry_irq(&rxo->stats.sync, start)); | 
 | 	} | 
 |  | 
 | 	for_all_tx_queues_on_eq(adapter, eqo, txo, i) { | 
 | 		do { | 
 | 			start = u64_stats_fetch_begin_irq(&txo->stats.sync); | 
 | 			tx_pkts += txo->stats.tx_reqs; | 
 | 		} while (u64_stats_fetch_retry_irq(&txo->stats.sync, start)); | 
 | 	} | 
 |  | 
 | 	/* Skip, if wrapped around or first calculation */ | 
 | 	now = jiffies; | 
 | 	if (!aic->jiffies || time_before(now, aic->jiffies) || | 
 | 	    rx_pkts < aic->rx_pkts_prev || | 
 | 	    tx_pkts < aic->tx_reqs_prev) { | 
 | 		be_aic_update(aic, rx_pkts, tx_pkts, now); | 
 | 		return aic->prev_eqd; | 
 | 	} | 
 |  | 
 | 	delta = jiffies_to_msecs(now - aic->jiffies); | 
 | 	if (delta == 0) | 
 | 		return aic->prev_eqd; | 
 |  | 
 | 	pps = (((u32)(rx_pkts - aic->rx_pkts_prev) * 1000) / delta) + | 
 | 		(((u32)(tx_pkts - aic->tx_reqs_prev) * 1000) / delta); | 
 | 	eqd = (pps / 15000) << 2; | 
 |  | 
 | 	if (eqd < 8) | 
 | 		eqd = 0; | 
 | 	eqd = min_t(u32, eqd, aic->max_eqd); | 
 | 	eqd = max_t(u32, eqd, aic->min_eqd); | 
 |  | 
 | 	be_aic_update(aic, rx_pkts, tx_pkts, now); | 
 |  | 
 | 	return eqd; | 
 | } | 
 |  | 
 | /* For Skyhawk-R only */ | 
 | static u32 be_get_eq_delay_mult_enc(struct be_eq_obj *eqo) | 
 | { | 
 | 	struct be_adapter *adapter = eqo->adapter; | 
 | 	struct be_aic_obj *aic = &adapter->aic_obj[eqo->idx]; | 
 | 	ulong now = jiffies; | 
 | 	int eqd; | 
 | 	u32 mult_enc; | 
 |  | 
 | 	if (!aic->enable) | 
 | 		return 0; | 
 |  | 
 | 	if (jiffies_to_msecs(now - aic->jiffies) < 1) | 
 | 		eqd = aic->prev_eqd; | 
 | 	else | 
 | 		eqd = be_get_new_eqd(eqo); | 
 |  | 
 | 	if (eqd > 100) | 
 | 		mult_enc = R2I_DLY_ENC_1; | 
 | 	else if (eqd > 60) | 
 | 		mult_enc = R2I_DLY_ENC_2; | 
 | 	else if (eqd > 20) | 
 | 		mult_enc = R2I_DLY_ENC_3; | 
 | 	else | 
 | 		mult_enc = R2I_DLY_ENC_0; | 
 |  | 
 | 	aic->prev_eqd = eqd; | 
 |  | 
 | 	return mult_enc; | 
 | } | 
 |  | 
 | void be_eqd_update(struct be_adapter *adapter, bool force_update) | 
 | { | 
 | 	struct be_set_eqd set_eqd[MAX_EVT_QS]; | 
 | 	struct be_aic_obj *aic; | 
 | 	struct be_eq_obj *eqo; | 
 | 	int i, num = 0, eqd; | 
 |  | 
 | 	for_all_evt_queues(adapter, eqo, i) { | 
 | 		aic = &adapter->aic_obj[eqo->idx]; | 
 | 		eqd = be_get_new_eqd(eqo); | 
 | 		if (force_update || eqd != aic->prev_eqd) { | 
 | 			set_eqd[num].delay_multiplier = (eqd * 65)/100; | 
 | 			set_eqd[num].eq_id = eqo->q.id; | 
 | 			aic->prev_eqd = eqd; | 
 | 			num++; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (num) | 
 | 		be_cmd_modify_eqd(adapter, set_eqd, num); | 
 | } | 
 |  | 
 | static void be_rx_stats_update(struct be_rx_obj *rxo, | 
 | 			       struct be_rx_compl_info *rxcp) | 
 | { | 
 | 	struct be_rx_stats *stats = rx_stats(rxo); | 
 |  | 
 | 	u64_stats_update_begin(&stats->sync); | 
 | 	stats->rx_compl++; | 
 | 	stats->rx_bytes += rxcp->pkt_size; | 
 | 	stats->rx_pkts++; | 
 | 	if (rxcp->tunneled) | 
 | 		stats->rx_vxlan_offload_pkts++; | 
 | 	if (rxcp->pkt_type == BE_MULTICAST_PACKET) | 
 | 		stats->rx_mcast_pkts++; | 
 | 	if (rxcp->err) | 
 | 		stats->rx_compl_err++; | 
 | 	u64_stats_update_end(&stats->sync); | 
 | } | 
 |  | 
 | static inline bool csum_passed(struct be_rx_compl_info *rxcp) | 
 | { | 
 | 	/* L4 checksum is not reliable for non TCP/UDP packets. | 
 | 	 * Also ignore ipcksm for ipv6 pkts | 
 | 	 */ | 
 | 	return (rxcp->tcpf || rxcp->udpf) && rxcp->l4_csum && | 
 | 		(rxcp->ip_csum || rxcp->ipv6) && !rxcp->err; | 
 | } | 
 |  | 
 | static struct be_rx_page_info *get_rx_page_info(struct be_rx_obj *rxo) | 
 | { | 
 | 	struct be_adapter *adapter = rxo->adapter; | 
 | 	struct be_rx_page_info *rx_page_info; | 
 | 	struct be_queue_info *rxq = &rxo->q; | 
 | 	u32 frag_idx = rxq->tail; | 
 |  | 
 | 	rx_page_info = &rxo->page_info_tbl[frag_idx]; | 
 | 	BUG_ON(!rx_page_info->page); | 
 |  | 
 | 	if (rx_page_info->last_frag) { | 
 | 		dma_unmap_page(&adapter->pdev->dev, | 
 | 			       dma_unmap_addr(rx_page_info, bus), | 
 | 			       adapter->big_page_size, DMA_FROM_DEVICE); | 
 | 		rx_page_info->last_frag = false; | 
 | 	} else { | 
 | 		dma_sync_single_for_cpu(&adapter->pdev->dev, | 
 | 					dma_unmap_addr(rx_page_info, bus), | 
 | 					rx_frag_size, DMA_FROM_DEVICE); | 
 | 	} | 
 |  | 
 | 	queue_tail_inc(rxq); | 
 | 	atomic_dec(&rxq->used); | 
 | 	return rx_page_info; | 
 | } | 
 |  | 
 | /* Throwaway the data in the Rx completion */ | 
 | static void be_rx_compl_discard(struct be_rx_obj *rxo, | 
 | 				struct be_rx_compl_info *rxcp) | 
 | { | 
 | 	struct be_rx_page_info *page_info; | 
 | 	u16 i, num_rcvd = rxcp->num_rcvd; | 
 |  | 
 | 	for (i = 0; i < num_rcvd; i++) { | 
 | 		page_info = get_rx_page_info(rxo); | 
 | 		put_page(page_info->page); | 
 | 		memset(page_info, 0, sizeof(*page_info)); | 
 | 	} | 
 | } | 
 |  | 
 | /* | 
 |  * skb_fill_rx_data forms a complete skb for an ether frame | 
 |  * indicated by rxcp. | 
 |  */ | 
 | static void skb_fill_rx_data(struct be_rx_obj *rxo, struct sk_buff *skb, | 
 | 			     struct be_rx_compl_info *rxcp) | 
 | { | 
 | 	struct be_rx_page_info *page_info; | 
 | 	u16 i, j; | 
 | 	u16 hdr_len, curr_frag_len, remaining; | 
 | 	u8 *start; | 
 |  | 
 | 	page_info = get_rx_page_info(rxo); | 
 | 	start = page_address(page_info->page) + page_info->page_offset; | 
 | 	prefetch(start); | 
 |  | 
 | 	/* Copy data in the first descriptor of this completion */ | 
 | 	curr_frag_len = min(rxcp->pkt_size, rx_frag_size); | 
 |  | 
 | 	skb->len = curr_frag_len; | 
 | 	if (curr_frag_len <= BE_HDR_LEN) { /* tiny packet */ | 
 | 		memcpy(skb->data, start, curr_frag_len); | 
 | 		/* Complete packet has now been moved to data */ | 
 | 		put_page(page_info->page); | 
 | 		skb->data_len = 0; | 
 | 		skb->tail += curr_frag_len; | 
 | 	} else { | 
 | 		hdr_len = ETH_HLEN; | 
 | 		memcpy(skb->data, start, hdr_len); | 
 | 		skb_shinfo(skb)->nr_frags = 1; | 
 | 		skb_frag_set_page(skb, 0, page_info->page); | 
 | 		skb_shinfo(skb)->frags[0].page_offset = | 
 | 					page_info->page_offset + hdr_len; | 
 | 		skb_frag_size_set(&skb_shinfo(skb)->frags[0], | 
 | 				  curr_frag_len - hdr_len); | 
 | 		skb->data_len = curr_frag_len - hdr_len; | 
 | 		skb->truesize += rx_frag_size; | 
 | 		skb->tail += hdr_len; | 
 | 	} | 
 | 	page_info->page = NULL; | 
 |  | 
 | 	if (rxcp->pkt_size <= rx_frag_size) { | 
 | 		BUG_ON(rxcp->num_rcvd != 1); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	/* More frags present for this completion */ | 
 | 	remaining = rxcp->pkt_size - curr_frag_len; | 
 | 	for (i = 1, j = 0; i < rxcp->num_rcvd; i++) { | 
 | 		page_info = get_rx_page_info(rxo); | 
 | 		curr_frag_len = min(remaining, rx_frag_size); | 
 |  | 
 | 		/* Coalesce all frags from the same physical page in one slot */ | 
 | 		if (page_info->page_offset == 0) { | 
 | 			/* Fresh page */ | 
 | 			j++; | 
 | 			skb_frag_set_page(skb, j, page_info->page); | 
 | 			skb_shinfo(skb)->frags[j].page_offset = | 
 | 							page_info->page_offset; | 
 | 			skb_frag_size_set(&skb_shinfo(skb)->frags[j], 0); | 
 | 			skb_shinfo(skb)->nr_frags++; | 
 | 		} else { | 
 | 			put_page(page_info->page); | 
 | 		} | 
 |  | 
 | 		skb_frag_size_add(&skb_shinfo(skb)->frags[j], curr_frag_len); | 
 | 		skb->len += curr_frag_len; | 
 | 		skb->data_len += curr_frag_len; | 
 | 		skb->truesize += rx_frag_size; | 
 | 		remaining -= curr_frag_len; | 
 | 		page_info->page = NULL; | 
 | 	} | 
 | 	BUG_ON(j > MAX_SKB_FRAGS); | 
 | } | 
 |  | 
 | /* Process the RX completion indicated by rxcp when GRO is disabled */ | 
 | static void be_rx_compl_process(struct be_rx_obj *rxo, struct napi_struct *napi, | 
 | 				struct be_rx_compl_info *rxcp) | 
 | { | 
 | 	struct be_adapter *adapter = rxo->adapter; | 
 | 	struct net_device *netdev = adapter->netdev; | 
 | 	struct sk_buff *skb; | 
 |  | 
 | 	skb = netdev_alloc_skb_ip_align(netdev, BE_RX_SKB_ALLOC_SIZE); | 
 | 	if (unlikely(!skb)) { | 
 | 		rx_stats(rxo)->rx_drops_no_skbs++; | 
 | 		be_rx_compl_discard(rxo, rxcp); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	skb_fill_rx_data(rxo, skb, rxcp); | 
 |  | 
 | 	if (likely((netdev->features & NETIF_F_RXCSUM) && csum_passed(rxcp))) | 
 | 		skb->ip_summed = CHECKSUM_UNNECESSARY; | 
 | 	else | 
 | 		skb_checksum_none_assert(skb); | 
 |  | 
 | 	skb->protocol = eth_type_trans(skb, netdev); | 
 | 	skb_record_rx_queue(skb, rxo - &adapter->rx_obj[0]); | 
 | 	if (netdev->features & NETIF_F_RXHASH) | 
 | 		skb_set_hash(skb, rxcp->rss_hash, PKT_HASH_TYPE_L3); | 
 |  | 
 | 	skb->csum_level = rxcp->tunneled; | 
 | 	skb_mark_napi_id(skb, napi); | 
 |  | 
 | 	if (rxcp->vlanf) | 
 | 		__vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), rxcp->vlan_tag); | 
 |  | 
 | 	netif_receive_skb(skb); | 
 | } | 
 |  | 
 | /* Process the RX completion indicated by rxcp when GRO is enabled */ | 
 | static void be_rx_compl_process_gro(struct be_rx_obj *rxo, | 
 | 				    struct napi_struct *napi, | 
 | 				    struct be_rx_compl_info *rxcp) | 
 | { | 
 | 	struct be_adapter *adapter = rxo->adapter; | 
 | 	struct be_rx_page_info *page_info; | 
 | 	struct sk_buff *skb = NULL; | 
 | 	u16 remaining, curr_frag_len; | 
 | 	u16 i, j; | 
 |  | 
 | 	skb = napi_get_frags(napi); | 
 | 	if (!skb) { | 
 | 		be_rx_compl_discard(rxo, rxcp); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	remaining = rxcp->pkt_size; | 
 | 	for (i = 0, j = -1; i < rxcp->num_rcvd; i++) { | 
 | 		page_info = get_rx_page_info(rxo); | 
 |  | 
 | 		curr_frag_len = min(remaining, rx_frag_size); | 
 |  | 
 | 		/* Coalesce all frags from the same physical page in one slot */ | 
 | 		if (i == 0 || page_info->page_offset == 0) { | 
 | 			/* First frag or Fresh page */ | 
 | 			j++; | 
 | 			skb_frag_set_page(skb, j, page_info->page); | 
 | 			skb_shinfo(skb)->frags[j].page_offset = | 
 | 							page_info->page_offset; | 
 | 			skb_frag_size_set(&skb_shinfo(skb)->frags[j], 0); | 
 | 		} else { | 
 | 			put_page(page_info->page); | 
 | 		} | 
 | 		skb_frag_size_add(&skb_shinfo(skb)->frags[j], curr_frag_len); | 
 | 		skb->truesize += rx_frag_size; | 
 | 		remaining -= curr_frag_len; | 
 | 		memset(page_info, 0, sizeof(*page_info)); | 
 | 	} | 
 | 	BUG_ON(j > MAX_SKB_FRAGS); | 
 |  | 
 | 	skb_shinfo(skb)->nr_frags = j + 1; | 
 | 	skb->len = rxcp->pkt_size; | 
 | 	skb->data_len = rxcp->pkt_size; | 
 | 	skb->ip_summed = CHECKSUM_UNNECESSARY; | 
 | 	skb_record_rx_queue(skb, rxo - &adapter->rx_obj[0]); | 
 | 	if (adapter->netdev->features & NETIF_F_RXHASH) | 
 | 		skb_set_hash(skb, rxcp->rss_hash, PKT_HASH_TYPE_L3); | 
 |  | 
 | 	skb->csum_level = rxcp->tunneled; | 
 |  | 
 | 	if (rxcp->vlanf) | 
 | 		__vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), rxcp->vlan_tag); | 
 |  | 
 | 	napi_gro_frags(napi); | 
 | } | 
 |  | 
 | static void be_parse_rx_compl_v1(struct be_eth_rx_compl *compl, | 
 | 				 struct be_rx_compl_info *rxcp) | 
 | { | 
 | 	rxcp->pkt_size = GET_RX_COMPL_V1_BITS(pktsize, compl); | 
 | 	rxcp->vlanf = GET_RX_COMPL_V1_BITS(vtp, compl); | 
 | 	rxcp->err = GET_RX_COMPL_V1_BITS(err, compl); | 
 | 	rxcp->tcpf = GET_RX_COMPL_V1_BITS(tcpf, compl); | 
 | 	rxcp->udpf = GET_RX_COMPL_V1_BITS(udpf, compl); | 
 | 	rxcp->ip_csum = GET_RX_COMPL_V1_BITS(ipcksm, compl); | 
 | 	rxcp->l4_csum = GET_RX_COMPL_V1_BITS(l4_cksm, compl); | 
 | 	rxcp->ipv6 = GET_RX_COMPL_V1_BITS(ip_version, compl); | 
 | 	rxcp->num_rcvd = GET_RX_COMPL_V1_BITS(numfrags, compl); | 
 | 	rxcp->pkt_type = GET_RX_COMPL_V1_BITS(cast_enc, compl); | 
 | 	rxcp->rss_hash = GET_RX_COMPL_V1_BITS(rsshash, compl); | 
 | 	if (rxcp->vlanf) { | 
 | 		rxcp->qnq = GET_RX_COMPL_V1_BITS(qnq, compl); | 
 | 		rxcp->vlan_tag = GET_RX_COMPL_V1_BITS(vlan_tag, compl); | 
 | 	} | 
 | 	rxcp->port = GET_RX_COMPL_V1_BITS(port, compl); | 
 | 	rxcp->tunneled = | 
 | 		GET_RX_COMPL_V1_BITS(tunneled, compl); | 
 | } | 
 |  | 
 | static void be_parse_rx_compl_v0(struct be_eth_rx_compl *compl, | 
 | 				 struct be_rx_compl_info *rxcp) | 
 | { | 
 | 	rxcp->pkt_size = GET_RX_COMPL_V0_BITS(pktsize, compl); | 
 | 	rxcp->vlanf = GET_RX_COMPL_V0_BITS(vtp, compl); | 
 | 	rxcp->err = GET_RX_COMPL_V0_BITS(err, compl); | 
 | 	rxcp->tcpf = GET_RX_COMPL_V0_BITS(tcpf, compl); | 
 | 	rxcp->udpf = GET_RX_COMPL_V0_BITS(udpf, compl); | 
 | 	rxcp->ip_csum = GET_RX_COMPL_V0_BITS(ipcksm, compl); | 
 | 	rxcp->l4_csum = GET_RX_COMPL_V0_BITS(l4_cksm, compl); | 
 | 	rxcp->ipv6 = GET_RX_COMPL_V0_BITS(ip_version, compl); | 
 | 	rxcp->num_rcvd = GET_RX_COMPL_V0_BITS(numfrags, compl); | 
 | 	rxcp->pkt_type = GET_RX_COMPL_V0_BITS(cast_enc, compl); | 
 | 	rxcp->rss_hash = GET_RX_COMPL_V0_BITS(rsshash, compl); | 
 | 	if (rxcp->vlanf) { | 
 | 		rxcp->qnq = GET_RX_COMPL_V0_BITS(qnq, compl); | 
 | 		rxcp->vlan_tag = GET_RX_COMPL_V0_BITS(vlan_tag, compl); | 
 | 	} | 
 | 	rxcp->port = GET_RX_COMPL_V0_BITS(port, compl); | 
 | 	rxcp->ip_frag = GET_RX_COMPL_V0_BITS(ip_frag, compl); | 
 | } | 
 |  | 
 | static struct be_rx_compl_info *be_rx_compl_get(struct be_rx_obj *rxo) | 
 | { | 
 | 	struct be_eth_rx_compl *compl = queue_tail_node(&rxo->cq); | 
 | 	struct be_rx_compl_info *rxcp = &rxo->rxcp; | 
 | 	struct be_adapter *adapter = rxo->adapter; | 
 |  | 
 | 	/* For checking the valid bit it is Ok to use either definition as the | 
 | 	 * valid bit is at the same position in both v0 and v1 Rx compl */ | 
 | 	if (compl->dw[offsetof(struct amap_eth_rx_compl_v1, valid) / 32] == 0) | 
 | 		return NULL; | 
 |  | 
 | 	rmb(); | 
 | 	be_dws_le_to_cpu(compl, sizeof(*compl)); | 
 |  | 
 | 	if (adapter->be3_native) | 
 | 		be_parse_rx_compl_v1(compl, rxcp); | 
 | 	else | 
 | 		be_parse_rx_compl_v0(compl, rxcp); | 
 |  | 
 | 	if (rxcp->ip_frag) | 
 | 		rxcp->l4_csum = 0; | 
 |  | 
 | 	if (rxcp->vlanf) { | 
 | 		/* In QNQ modes, if qnq bit is not set, then the packet was | 
 | 		 * tagged only with the transparent outer vlan-tag and must | 
 | 		 * not be treated as a vlan packet by host | 
 | 		 */ | 
 | 		if (be_is_qnq_mode(adapter) && !rxcp->qnq) | 
 | 			rxcp->vlanf = 0; | 
 |  | 
 | 		if (!lancer_chip(adapter)) | 
 | 			rxcp->vlan_tag = swab16(rxcp->vlan_tag); | 
 |  | 
 | 		if (adapter->pvid == (rxcp->vlan_tag & VLAN_VID_MASK) && | 
 | 		    !test_bit(rxcp->vlan_tag, adapter->vids)) | 
 | 			rxcp->vlanf = 0; | 
 | 	} | 
 |  | 
 | 	/* As the compl has been parsed, reset it; we wont touch it again */ | 
 | 	compl->dw[offsetof(struct amap_eth_rx_compl_v1, valid) / 32] = 0; | 
 |  | 
 | 	queue_tail_inc(&rxo->cq); | 
 | 	return rxcp; | 
 | } | 
 |  | 
 | static inline struct page *be_alloc_pages(u32 size, gfp_t gfp) | 
 | { | 
 | 	u32 order = get_order(size); | 
 |  | 
 | 	if (order > 0) | 
 | 		gfp |= __GFP_COMP; | 
 | 	return  alloc_pages(gfp, order); | 
 | } | 
 |  | 
 | /* | 
 |  * Allocate a page, split it to fragments of size rx_frag_size and post as | 
 |  * receive buffers to BE | 
 |  */ | 
 | static void be_post_rx_frags(struct be_rx_obj *rxo, gfp_t gfp, u32 frags_needed) | 
 | { | 
 | 	struct be_adapter *adapter = rxo->adapter; | 
 | 	struct be_rx_page_info *page_info = NULL, *prev_page_info = NULL; | 
 | 	struct be_queue_info *rxq = &rxo->q; | 
 | 	struct page *pagep = NULL; | 
 | 	struct device *dev = &adapter->pdev->dev; | 
 | 	struct be_eth_rx_d *rxd; | 
 | 	u64 page_dmaaddr = 0, frag_dmaaddr; | 
 | 	u32 posted, page_offset = 0, notify = 0; | 
 |  | 
 | 	page_info = &rxo->page_info_tbl[rxq->head]; | 
 | 	for (posted = 0; posted < frags_needed && !page_info->page; posted++) { | 
 | 		if (!pagep) { | 
 | 			pagep = be_alloc_pages(adapter->big_page_size, gfp); | 
 | 			if (unlikely(!pagep)) { | 
 | 				rx_stats(rxo)->rx_post_fail++; | 
 | 				break; | 
 | 			} | 
 | 			page_dmaaddr = dma_map_page(dev, pagep, 0, | 
 | 						    adapter->big_page_size, | 
 | 						    DMA_FROM_DEVICE); | 
 | 			if (dma_mapping_error(dev, page_dmaaddr)) { | 
 | 				put_page(pagep); | 
 | 				pagep = NULL; | 
 | 				adapter->drv_stats.dma_map_errors++; | 
 | 				break; | 
 | 			} | 
 | 			page_offset = 0; | 
 | 		} else { | 
 | 			get_page(pagep); | 
 | 			page_offset += rx_frag_size; | 
 | 		} | 
 | 		page_info->page_offset = page_offset; | 
 | 		page_info->page = pagep; | 
 |  | 
 | 		rxd = queue_head_node(rxq); | 
 | 		frag_dmaaddr = page_dmaaddr + page_info->page_offset; | 
 | 		rxd->fragpa_lo = cpu_to_le32(frag_dmaaddr & 0xFFFFFFFF); | 
 | 		rxd->fragpa_hi = cpu_to_le32(upper_32_bits(frag_dmaaddr)); | 
 |  | 
 | 		/* Any space left in the current big page for another frag? */ | 
 | 		if ((page_offset + rx_frag_size + rx_frag_size) > | 
 | 					adapter->big_page_size) { | 
 | 			pagep = NULL; | 
 | 			page_info->last_frag = true; | 
 | 			dma_unmap_addr_set(page_info, bus, page_dmaaddr); | 
 | 		} else { | 
 | 			dma_unmap_addr_set(page_info, bus, frag_dmaaddr); | 
 | 		} | 
 |  | 
 | 		prev_page_info = page_info; | 
 | 		queue_head_inc(rxq); | 
 | 		page_info = &rxo->page_info_tbl[rxq->head]; | 
 | 	} | 
 |  | 
 | 	/* Mark the last frag of a page when we break out of the above loop | 
 | 	 * with no more slots available in the RXQ | 
 | 	 */ | 
 | 	if (pagep) { | 
 | 		prev_page_info->last_frag = true; | 
 | 		dma_unmap_addr_set(prev_page_info, bus, page_dmaaddr); | 
 | 	} | 
 |  | 
 | 	if (posted) { | 
 | 		atomic_add(posted, &rxq->used); | 
 | 		if (rxo->rx_post_starved) | 
 | 			rxo->rx_post_starved = false; | 
 | 		do { | 
 | 			notify = min(MAX_NUM_POST_ERX_DB, posted); | 
 | 			be_rxq_notify(adapter, rxq->id, notify); | 
 | 			posted -= notify; | 
 | 		} while (posted); | 
 | 	} else if (atomic_read(&rxq->used) == 0) { | 
 | 		/* Let be_worker replenish when memory is available */ | 
 | 		rxo->rx_post_starved = true; | 
 | 	} | 
 | } | 
 |  | 
 | static inline void be_update_tx_err(struct be_tx_obj *txo, u8 status) | 
 | { | 
 | 	switch (status) { | 
 | 	case BE_TX_COMP_HDR_PARSE_ERR: | 
 | 		tx_stats(txo)->tx_hdr_parse_err++; | 
 | 		break; | 
 | 	case BE_TX_COMP_NDMA_ERR: | 
 | 		tx_stats(txo)->tx_dma_err++; | 
 | 		break; | 
 | 	case BE_TX_COMP_ACL_ERR: | 
 | 		tx_stats(txo)->tx_spoof_check_err++; | 
 | 		break; | 
 | 	} | 
 | } | 
 |  | 
 | static inline void lancer_update_tx_err(struct be_tx_obj *txo, u8 status) | 
 | { | 
 | 	switch (status) { | 
 | 	case LANCER_TX_COMP_LSO_ERR: | 
 | 		tx_stats(txo)->tx_tso_err++; | 
 | 		break; | 
 | 	case LANCER_TX_COMP_HSW_DROP_MAC_ERR: | 
 | 	case LANCER_TX_COMP_HSW_DROP_VLAN_ERR: | 
 | 		tx_stats(txo)->tx_spoof_check_err++; | 
 | 		break; | 
 | 	case LANCER_TX_COMP_QINQ_ERR: | 
 | 		tx_stats(txo)->tx_qinq_err++; | 
 | 		break; | 
 | 	case LANCER_TX_COMP_PARITY_ERR: | 
 | 		tx_stats(txo)->tx_internal_parity_err++; | 
 | 		break; | 
 | 	case LANCER_TX_COMP_DMA_ERR: | 
 | 		tx_stats(txo)->tx_dma_err++; | 
 | 		break; | 
 | 	case LANCER_TX_COMP_SGE_ERR: | 
 | 		tx_stats(txo)->tx_sge_err++; | 
 | 		break; | 
 | 	} | 
 | } | 
 |  | 
 | static struct be_tx_compl_info *be_tx_compl_get(struct be_adapter *adapter, | 
 | 						struct be_tx_obj *txo) | 
 | { | 
 | 	struct be_queue_info *tx_cq = &txo->cq; | 
 | 	struct be_tx_compl_info *txcp = &txo->txcp; | 
 | 	struct be_eth_tx_compl *compl = queue_tail_node(tx_cq); | 
 |  | 
 | 	if (compl->dw[offsetof(struct amap_eth_tx_compl, valid) / 32] == 0) | 
 | 		return NULL; | 
 |  | 
 | 	/* Ensure load ordering of valid bit dword and other dwords below */ | 
 | 	rmb(); | 
 | 	be_dws_le_to_cpu(compl, sizeof(*compl)); | 
 |  | 
 | 	txcp->status = GET_TX_COMPL_BITS(status, compl); | 
 | 	txcp->end_index = GET_TX_COMPL_BITS(wrb_index, compl); | 
 |  | 
 | 	if (txcp->status) { | 
 | 		if (lancer_chip(adapter)) { | 
 | 			lancer_update_tx_err(txo, txcp->status); | 
 | 			/* Reset the adapter incase of TSO, | 
 | 			 * SGE or Parity error | 
 | 			 */ | 
 | 			if (txcp->status == LANCER_TX_COMP_LSO_ERR || | 
 | 			    txcp->status == LANCER_TX_COMP_PARITY_ERR || | 
 | 			    txcp->status == LANCER_TX_COMP_SGE_ERR) | 
 | 				be_set_error(adapter, BE_ERROR_TX); | 
 | 		} else { | 
 | 			be_update_tx_err(txo, txcp->status); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (be_check_error(adapter, BE_ERROR_TX)) | 
 | 		return NULL; | 
 |  | 
 | 	compl->dw[offsetof(struct amap_eth_tx_compl, valid) / 32] = 0; | 
 | 	queue_tail_inc(tx_cq); | 
 | 	return txcp; | 
 | } | 
 |  | 
 | static u16 be_tx_compl_process(struct be_adapter *adapter, | 
 | 			       struct be_tx_obj *txo, u16 last_index) | 
 | { | 
 | 	struct sk_buff **sent_skbs = txo->sent_skb_list; | 
 | 	struct be_queue_info *txq = &txo->q; | 
 | 	struct sk_buff *skb = NULL; | 
 | 	bool unmap_skb_hdr = false; | 
 | 	struct be_eth_wrb *wrb; | 
 | 	u16 num_wrbs = 0; | 
 | 	u32 frag_index; | 
 |  | 
 | 	do { | 
 | 		if (sent_skbs[txq->tail]) { | 
 | 			/* Free skb from prev req */ | 
 | 			if (skb) | 
 | 				dev_consume_skb_any(skb); | 
 | 			skb = sent_skbs[txq->tail]; | 
 | 			sent_skbs[txq->tail] = NULL; | 
 | 			queue_tail_inc(txq);  /* skip hdr wrb */ | 
 | 			num_wrbs++; | 
 | 			unmap_skb_hdr = true; | 
 | 		} | 
 | 		wrb = queue_tail_node(txq); | 
 | 		frag_index = txq->tail; | 
 | 		unmap_tx_frag(&adapter->pdev->dev, wrb, | 
 | 			      (unmap_skb_hdr && skb_headlen(skb))); | 
 | 		unmap_skb_hdr = false; | 
 | 		queue_tail_inc(txq); | 
 | 		num_wrbs++; | 
 | 	} while (frag_index != last_index); | 
 | 	dev_consume_skb_any(skb); | 
 |  | 
 | 	return num_wrbs; | 
 | } | 
 |  | 
 | /* Return the number of events in the event queue */ | 
 | static inline int events_get(struct be_eq_obj *eqo) | 
 | { | 
 | 	struct be_eq_entry *eqe; | 
 | 	int num = 0; | 
 |  | 
 | 	do { | 
 | 		eqe = queue_tail_node(&eqo->q); | 
 | 		if (eqe->evt == 0) | 
 | 			break; | 
 |  | 
 | 		rmb(); | 
 | 		eqe->evt = 0; | 
 | 		num++; | 
 | 		queue_tail_inc(&eqo->q); | 
 | 	} while (true); | 
 |  | 
 | 	return num; | 
 | } | 
 |  | 
 | /* Leaves the EQ is disarmed state */ | 
 | static void be_eq_clean(struct be_eq_obj *eqo) | 
 | { | 
 | 	int num = events_get(eqo); | 
 |  | 
 | 	be_eq_notify(eqo->adapter, eqo->q.id, false, true, num, 0); | 
 | } | 
 |  | 
 | /* Free posted rx buffers that were not used */ | 
 | static void be_rxq_clean(struct be_rx_obj *rxo) | 
 | { | 
 | 	struct be_queue_info *rxq = &rxo->q; | 
 | 	struct be_rx_page_info *page_info; | 
 |  | 
 | 	while (atomic_read(&rxq->used) > 0) { | 
 | 		page_info = get_rx_page_info(rxo); | 
 | 		put_page(page_info->page); | 
 | 		memset(page_info, 0, sizeof(*page_info)); | 
 | 	} | 
 | 	BUG_ON(atomic_read(&rxq->used)); | 
 | 	rxq->tail = 0; | 
 | 	rxq->head = 0; | 
 | } | 
 |  | 
 | static void be_rx_cq_clean(struct be_rx_obj *rxo) | 
 | { | 
 | 	struct be_queue_info *rx_cq = &rxo->cq; | 
 | 	struct be_rx_compl_info *rxcp; | 
 | 	struct be_adapter *adapter = rxo->adapter; | 
 | 	int flush_wait = 0; | 
 |  | 
 | 	/* Consume pending rx completions. | 
 | 	 * Wait for the flush completion (identified by zero num_rcvd) | 
 | 	 * to arrive. Notify CQ even when there are no more CQ entries | 
 | 	 * for HW to flush partially coalesced CQ entries. | 
 | 	 * In Lancer, there is no need to wait for flush compl. | 
 | 	 */ | 
 | 	for (;;) { | 
 | 		rxcp = be_rx_compl_get(rxo); | 
 | 		if (!rxcp) { | 
 | 			if (lancer_chip(adapter)) | 
 | 				break; | 
 |  | 
 | 			if (flush_wait++ > 50 || | 
 | 			    be_check_error(adapter, | 
 | 					   BE_ERROR_HW)) { | 
 | 				dev_warn(&adapter->pdev->dev, | 
 | 					 "did not receive flush compl\n"); | 
 | 				break; | 
 | 			} | 
 | 			be_cq_notify(adapter, rx_cq->id, true, 0); | 
 | 			mdelay(1); | 
 | 		} else { | 
 | 			be_rx_compl_discard(rxo, rxcp); | 
 | 			be_cq_notify(adapter, rx_cq->id, false, 1); | 
 | 			if (rxcp->num_rcvd == 0) | 
 | 				break; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	/* After cleanup, leave the CQ in unarmed state */ | 
 | 	be_cq_notify(adapter, rx_cq->id, false, 0); | 
 | } | 
 |  | 
 | static void be_tx_compl_clean(struct be_adapter *adapter) | 
 | { | 
 | 	struct device *dev = &adapter->pdev->dev; | 
 | 	u16 cmpl = 0, timeo = 0, num_wrbs = 0; | 
 | 	struct be_tx_compl_info *txcp; | 
 | 	struct be_queue_info *txq; | 
 | 	u32 end_idx, notified_idx; | 
 | 	struct be_tx_obj *txo; | 
 | 	int i, pending_txqs; | 
 |  | 
 | 	/* Stop polling for compls when HW has been silent for 10ms */ | 
 | 	do { | 
 | 		pending_txqs = adapter->num_tx_qs; | 
 |  | 
 | 		for_all_tx_queues(adapter, txo, i) { | 
 | 			cmpl = 0; | 
 | 			num_wrbs = 0; | 
 | 			txq = &txo->q; | 
 | 			while ((txcp = be_tx_compl_get(adapter, txo))) { | 
 | 				num_wrbs += | 
 | 					be_tx_compl_process(adapter, txo, | 
 | 							    txcp->end_index); | 
 | 				cmpl++; | 
 | 			} | 
 | 			if (cmpl) { | 
 | 				be_cq_notify(adapter, txo->cq.id, false, cmpl); | 
 | 				atomic_sub(num_wrbs, &txq->used); | 
 | 				timeo = 0; | 
 | 			} | 
 | 			if (!be_is_tx_compl_pending(txo)) | 
 | 				pending_txqs--; | 
 | 		} | 
 |  | 
 | 		if (pending_txqs == 0 || ++timeo > 10 || | 
 | 		    be_check_error(adapter, BE_ERROR_HW)) | 
 | 			break; | 
 |  | 
 | 		mdelay(1); | 
 | 	} while (true); | 
 |  | 
 | 	/* Free enqueued TX that was never notified to HW */ | 
 | 	for_all_tx_queues(adapter, txo, i) { | 
 | 		txq = &txo->q; | 
 |  | 
 | 		if (atomic_read(&txq->used)) { | 
 | 			dev_info(dev, "txq%d: cleaning %d pending tx-wrbs\n", | 
 | 				 i, atomic_read(&txq->used)); | 
 | 			notified_idx = txq->tail; | 
 | 			end_idx = txq->tail; | 
 | 			index_adv(&end_idx, atomic_read(&txq->used) - 1, | 
 | 				  txq->len); | 
 | 			/* Use the tx-compl process logic to handle requests | 
 | 			 * that were not sent to the HW. | 
 | 			 */ | 
 | 			num_wrbs = be_tx_compl_process(adapter, txo, end_idx); | 
 | 			atomic_sub(num_wrbs, &txq->used); | 
 | 			BUG_ON(atomic_read(&txq->used)); | 
 | 			txo->pend_wrb_cnt = 0; | 
 | 			/* Since hw was never notified of these requests, | 
 | 			 * reset TXQ indices | 
 | 			 */ | 
 | 			txq->head = notified_idx; | 
 | 			txq->tail = notified_idx; | 
 | 		} | 
 | 	} | 
 | } | 
 |  | 
 | static void be_evt_queues_destroy(struct be_adapter *adapter) | 
 | { | 
 | 	struct be_eq_obj *eqo; | 
 | 	int i; | 
 |  | 
 | 	for_all_evt_queues(adapter, eqo, i) { | 
 | 		if (eqo->q.created) { | 
 | 			be_eq_clean(eqo); | 
 | 			be_cmd_q_destroy(adapter, &eqo->q, QTYPE_EQ); | 
 | 			netif_napi_del(&eqo->napi); | 
 | 			free_cpumask_var(eqo->affinity_mask); | 
 | 		} | 
 | 		be_queue_free(adapter, &eqo->q); | 
 | 	} | 
 | } | 
 |  | 
 | static int be_evt_queues_create(struct be_adapter *adapter) | 
 | { | 
 | 	struct be_queue_info *eq; | 
 | 	struct be_eq_obj *eqo; | 
 | 	struct be_aic_obj *aic; | 
 | 	int i, rc; | 
 |  | 
 | 	/* need enough EQs to service both RX and TX queues */ | 
 | 	adapter->num_evt_qs = min_t(u16, num_irqs(adapter), | 
 | 				    max(adapter->cfg_num_rx_irqs, | 
 | 					adapter->cfg_num_tx_irqs)); | 
 |  | 
 | 	for_all_evt_queues(adapter, eqo, i) { | 
 | 		int numa_node = dev_to_node(&adapter->pdev->dev); | 
 |  | 
 | 		aic = &adapter->aic_obj[i]; | 
 | 		eqo->adapter = adapter; | 
 | 		eqo->idx = i; | 
 | 		aic->max_eqd = BE_MAX_EQD; | 
 | 		aic->enable = true; | 
 |  | 
 | 		eq = &eqo->q; | 
 | 		rc = be_queue_alloc(adapter, eq, EVNT_Q_LEN, | 
 | 				    sizeof(struct be_eq_entry)); | 
 | 		if (rc) | 
 | 			return rc; | 
 |  | 
 | 		rc = be_cmd_eq_create(adapter, eqo); | 
 | 		if (rc) | 
 | 			return rc; | 
 |  | 
 | 		if (!zalloc_cpumask_var(&eqo->affinity_mask, GFP_KERNEL)) | 
 | 			return -ENOMEM; | 
 | 		cpumask_set_cpu(cpumask_local_spread(i, numa_node), | 
 | 				eqo->affinity_mask); | 
 | 		netif_napi_add(adapter->netdev, &eqo->napi, be_poll, | 
 | 			       BE_NAPI_WEIGHT); | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void be_mcc_queues_destroy(struct be_adapter *adapter) | 
 | { | 
 | 	struct be_queue_info *q; | 
 |  | 
 | 	q = &adapter->mcc_obj.q; | 
 | 	if (q->created) | 
 | 		be_cmd_q_destroy(adapter, q, QTYPE_MCCQ); | 
 | 	be_queue_free(adapter, q); | 
 |  | 
 | 	q = &adapter->mcc_obj.cq; | 
 | 	if (q->created) | 
 | 		be_cmd_q_destroy(adapter, q, QTYPE_CQ); | 
 | 	be_queue_free(adapter, q); | 
 | } | 
 |  | 
 | /* Must be called only after TX qs are created as MCC shares TX EQ */ | 
 | static int be_mcc_queues_create(struct be_adapter *adapter) | 
 | { | 
 | 	struct be_queue_info *q, *cq; | 
 |  | 
 | 	cq = &adapter->mcc_obj.cq; | 
 | 	if (be_queue_alloc(adapter, cq, MCC_CQ_LEN, | 
 | 			   sizeof(struct be_mcc_compl))) | 
 | 		goto err; | 
 |  | 
 | 	/* Use the default EQ for MCC completions */ | 
 | 	if (be_cmd_cq_create(adapter, cq, &mcc_eqo(adapter)->q, true, 0)) | 
 | 		goto mcc_cq_free; | 
 |  | 
 | 	q = &adapter->mcc_obj.q; | 
 | 	if (be_queue_alloc(adapter, q, MCC_Q_LEN, sizeof(struct be_mcc_wrb))) | 
 | 		goto mcc_cq_destroy; | 
 |  | 
 | 	if (be_cmd_mccq_create(adapter, q, cq)) | 
 | 		goto mcc_q_free; | 
 |  | 
 | 	return 0; | 
 |  | 
 | mcc_q_free: | 
 | 	be_queue_free(adapter, q); | 
 | mcc_cq_destroy: | 
 | 	be_cmd_q_destroy(adapter, cq, QTYPE_CQ); | 
 | mcc_cq_free: | 
 | 	be_queue_free(adapter, cq); | 
 | err: | 
 | 	return -1; | 
 | } | 
 |  | 
 | static void be_tx_queues_destroy(struct be_adapter *adapter) | 
 | { | 
 | 	struct be_queue_info *q; | 
 | 	struct be_tx_obj *txo; | 
 | 	u8 i; | 
 |  | 
 | 	for_all_tx_queues(adapter, txo, i) { | 
 | 		q = &txo->q; | 
 | 		if (q->created) | 
 | 			be_cmd_q_destroy(adapter, q, QTYPE_TXQ); | 
 | 		be_queue_free(adapter, q); | 
 |  | 
 | 		q = &txo->cq; | 
 | 		if (q->created) | 
 | 			be_cmd_q_destroy(adapter, q, QTYPE_CQ); | 
 | 		be_queue_free(adapter, q); | 
 | 	} | 
 | } | 
 |  | 
 | static int be_tx_qs_create(struct be_adapter *adapter) | 
 | { | 
 | 	struct be_queue_info *cq; | 
 | 	struct be_tx_obj *txo; | 
 | 	struct be_eq_obj *eqo; | 
 | 	int status, i; | 
 |  | 
 | 	adapter->num_tx_qs = min(adapter->num_evt_qs, adapter->cfg_num_tx_irqs); | 
 |  | 
 | 	for_all_tx_queues(adapter, txo, i) { | 
 | 		cq = &txo->cq; | 
 | 		status = be_queue_alloc(adapter, cq, TX_CQ_LEN, | 
 | 					sizeof(struct be_eth_tx_compl)); | 
 | 		if (status) | 
 | 			return status; | 
 |  | 
 | 		u64_stats_init(&txo->stats.sync); | 
 | 		u64_stats_init(&txo->stats.sync_compl); | 
 |  | 
 | 		/* If num_evt_qs is less than num_tx_qs, then more than | 
 | 		 * one txq share an eq | 
 | 		 */ | 
 | 		eqo = &adapter->eq_obj[i % adapter->num_evt_qs]; | 
 | 		status = be_cmd_cq_create(adapter, cq, &eqo->q, false, 3); | 
 | 		if (status) | 
 | 			return status; | 
 |  | 
 | 		status = be_queue_alloc(adapter, &txo->q, TX_Q_LEN, | 
 | 					sizeof(struct be_eth_wrb)); | 
 | 		if (status) | 
 | 			return status; | 
 |  | 
 | 		status = be_cmd_txq_create(adapter, txo); | 
 | 		if (status) | 
 | 			return status; | 
 |  | 
 | 		netif_set_xps_queue(adapter->netdev, eqo->affinity_mask, | 
 | 				    eqo->idx); | 
 | 	} | 
 |  | 
 | 	dev_info(&adapter->pdev->dev, "created %d TX queue(s)\n", | 
 | 		 adapter->num_tx_qs); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void be_rx_cqs_destroy(struct be_adapter *adapter) | 
 | { | 
 | 	struct be_queue_info *q; | 
 | 	struct be_rx_obj *rxo; | 
 | 	int i; | 
 |  | 
 | 	for_all_rx_queues(adapter, rxo, i) { | 
 | 		q = &rxo->cq; | 
 | 		if (q->created) | 
 | 			be_cmd_q_destroy(adapter, q, QTYPE_CQ); | 
 | 		be_queue_free(adapter, q); | 
 | 	} | 
 | } | 
 |  | 
 | static int be_rx_cqs_create(struct be_adapter *adapter) | 
 | { | 
 | 	struct be_queue_info *eq, *cq; | 
 | 	struct be_rx_obj *rxo; | 
 | 	int rc, i; | 
 |  | 
 | 	adapter->num_rss_qs = | 
 | 			min(adapter->num_evt_qs, adapter->cfg_num_rx_irqs); | 
 |  | 
 | 	/* We'll use RSS only if atleast 2 RSS rings are supported. */ | 
 | 	if (adapter->num_rss_qs < 2) | 
 | 		adapter->num_rss_qs = 0; | 
 |  | 
 | 	adapter->num_rx_qs = adapter->num_rss_qs + adapter->need_def_rxq; | 
 |  | 
 | 	/* When the interface is not capable of RSS rings (and there is no | 
 | 	 * need to create a default RXQ) we'll still need one RXQ | 
 | 	 */ | 
 | 	if (adapter->num_rx_qs == 0) | 
 | 		adapter->num_rx_qs = 1; | 
 |  | 
 | 	adapter->big_page_size = (1 << get_order(rx_frag_size)) * PAGE_SIZE; | 
 | 	for_all_rx_queues(adapter, rxo, i) { | 
 | 		rxo->adapter = adapter; | 
 | 		cq = &rxo->cq; | 
 | 		rc = be_queue_alloc(adapter, cq, RX_CQ_LEN, | 
 | 				    sizeof(struct be_eth_rx_compl)); | 
 | 		if (rc) | 
 | 			return rc; | 
 |  | 
 | 		u64_stats_init(&rxo->stats.sync); | 
 | 		eq = &adapter->eq_obj[i % adapter->num_evt_qs].q; | 
 | 		rc = be_cmd_cq_create(adapter, cq, eq, false, 3); | 
 | 		if (rc) | 
 | 			return rc; | 
 | 	} | 
 |  | 
 | 	dev_info(&adapter->pdev->dev, | 
 | 		 "created %d RX queue(s)\n", adapter->num_rx_qs); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static irqreturn_t be_intx(int irq, void *dev) | 
 | { | 
 | 	struct be_eq_obj *eqo = dev; | 
 | 	struct be_adapter *adapter = eqo->adapter; | 
 | 	int num_evts = 0; | 
 |  | 
 | 	/* IRQ is not expected when NAPI is scheduled as the EQ | 
 | 	 * will not be armed. | 
 | 	 * But, this can happen on Lancer INTx where it takes | 
 | 	 * a while to de-assert INTx or in BE2 where occasionaly | 
 | 	 * an interrupt may be raised even when EQ is unarmed. | 
 | 	 * If NAPI is already scheduled, then counting & notifying | 
 | 	 * events will orphan them. | 
 | 	 */ | 
 | 	if (napi_schedule_prep(&eqo->napi)) { | 
 | 		num_evts = events_get(eqo); | 
 | 		__napi_schedule(&eqo->napi); | 
 | 		if (num_evts) | 
 | 			eqo->spurious_intr = 0; | 
 | 	} | 
 | 	be_eq_notify(adapter, eqo->q.id, false, true, num_evts, 0); | 
 |  | 
 | 	/* Return IRQ_HANDLED only for the the first spurious intr | 
 | 	 * after a valid intr to stop the kernel from branding | 
 | 	 * this irq as a bad one! | 
 | 	 */ | 
 | 	if (num_evts || eqo->spurious_intr++ == 0) | 
 | 		return IRQ_HANDLED; | 
 | 	else | 
 | 		return IRQ_NONE; | 
 | } | 
 |  | 
 | static irqreturn_t be_msix(int irq, void *dev) | 
 | { | 
 | 	struct be_eq_obj *eqo = dev; | 
 |  | 
 | 	be_eq_notify(eqo->adapter, eqo->q.id, false, true, 0, 0); | 
 | 	napi_schedule(&eqo->napi); | 
 | 	return IRQ_HANDLED; | 
 | } | 
 |  | 
 | static inline bool do_gro(struct be_rx_compl_info *rxcp) | 
 | { | 
 | 	return (rxcp->tcpf && !rxcp->err && rxcp->l4_csum) ? true : false; | 
 | } | 
 |  | 
 | static int be_process_rx(struct be_rx_obj *rxo, struct napi_struct *napi, | 
 | 			 int budget) | 
 | { | 
 | 	struct be_adapter *adapter = rxo->adapter; | 
 | 	struct be_queue_info *rx_cq = &rxo->cq; | 
 | 	struct be_rx_compl_info *rxcp; | 
 | 	u32 work_done; | 
 | 	u32 frags_consumed = 0; | 
 |  | 
 | 	for (work_done = 0; work_done < budget; work_done++) { | 
 | 		rxcp = be_rx_compl_get(rxo); | 
 | 		if (!rxcp) | 
 | 			break; | 
 |  | 
 | 		/* Is it a flush compl that has no data */ | 
 | 		if (unlikely(rxcp->num_rcvd == 0)) | 
 | 			goto loop_continue; | 
 |  | 
 | 		/* Discard compl with partial DMA Lancer B0 */ | 
 | 		if (unlikely(!rxcp->pkt_size)) { | 
 | 			be_rx_compl_discard(rxo, rxcp); | 
 | 			goto loop_continue; | 
 | 		} | 
 |  | 
 | 		/* On BE drop pkts that arrive due to imperfect filtering in | 
 | 		 * promiscuous mode on some skews | 
 | 		 */ | 
 | 		if (unlikely(rxcp->port != adapter->port_num && | 
 | 			     !lancer_chip(adapter))) { | 
 | 			be_rx_compl_discard(rxo, rxcp); | 
 | 			goto loop_continue; | 
 | 		} | 
 |  | 
 | 		if (do_gro(rxcp)) | 
 | 			be_rx_compl_process_gro(rxo, napi, rxcp); | 
 | 		else | 
 | 			be_rx_compl_process(rxo, napi, rxcp); | 
 |  | 
 | loop_continue: | 
 | 		frags_consumed += rxcp->num_rcvd; | 
 | 		be_rx_stats_update(rxo, rxcp); | 
 | 	} | 
 |  | 
 | 	if (work_done) { | 
 | 		be_cq_notify(adapter, rx_cq->id, true, work_done); | 
 |  | 
 | 		/* When an rx-obj gets into post_starved state, just | 
 | 		 * let be_worker do the posting. | 
 | 		 */ | 
 | 		if (atomic_read(&rxo->q.used) < RX_FRAGS_REFILL_WM && | 
 | 		    !rxo->rx_post_starved) | 
 | 			be_post_rx_frags(rxo, GFP_ATOMIC, | 
 | 					 max_t(u32, MAX_RX_POST, | 
 | 					       frags_consumed)); | 
 | 	} | 
 |  | 
 | 	return work_done; | 
 | } | 
 |  | 
 |  | 
 | static void be_process_tx(struct be_adapter *adapter, struct be_tx_obj *txo, | 
 | 			  int idx) | 
 | { | 
 | 	int num_wrbs = 0, work_done = 0; | 
 | 	struct be_tx_compl_info *txcp; | 
 |  | 
 | 	while ((txcp = be_tx_compl_get(adapter, txo))) { | 
 | 		num_wrbs += be_tx_compl_process(adapter, txo, txcp->end_index); | 
 | 		work_done++; | 
 | 	} | 
 |  | 
 | 	if (work_done) { | 
 | 		be_cq_notify(adapter, txo->cq.id, true, work_done); | 
 | 		atomic_sub(num_wrbs, &txo->q.used); | 
 |  | 
 | 		/* As Tx wrbs have been freed up, wake up netdev queue | 
 | 		 * if it was stopped due to lack of tx wrbs.  */ | 
 | 		if (__netif_subqueue_stopped(adapter->netdev, idx) && | 
 | 		    be_can_txq_wake(txo)) { | 
 | 			netif_wake_subqueue(adapter->netdev, idx); | 
 | 		} | 
 |  | 
 | 		u64_stats_update_begin(&tx_stats(txo)->sync_compl); | 
 | 		tx_stats(txo)->tx_compl += work_done; | 
 | 		u64_stats_update_end(&tx_stats(txo)->sync_compl); | 
 | 	} | 
 | } | 
 |  | 
 | int be_poll(struct napi_struct *napi, int budget) | 
 | { | 
 | 	struct be_eq_obj *eqo = container_of(napi, struct be_eq_obj, napi); | 
 | 	struct be_adapter *adapter = eqo->adapter; | 
 | 	int max_work = 0, work, i, num_evts; | 
 | 	struct be_rx_obj *rxo; | 
 | 	struct be_tx_obj *txo; | 
 | 	u32 mult_enc = 0; | 
 |  | 
 | 	num_evts = events_get(eqo); | 
 |  | 
 | 	for_all_tx_queues_on_eq(adapter, eqo, txo, i) | 
 | 		be_process_tx(adapter, txo, i); | 
 |  | 
 | 	/* This loop will iterate twice for EQ0 in which | 
 | 	 * completions of the last RXQ (default one) are also processed | 
 | 	 * For other EQs the loop iterates only once | 
 | 	 */ | 
 | 	for_all_rx_queues_on_eq(adapter, eqo, rxo, i) { | 
 | 		work = be_process_rx(rxo, napi, budget); | 
 | 		max_work = max(work, max_work); | 
 | 	} | 
 |  | 
 | 	if (is_mcc_eqo(eqo)) | 
 | 		be_process_mcc(adapter); | 
 |  | 
 | 	if (max_work < budget) { | 
 | 		napi_complete_done(napi, max_work); | 
 |  | 
 | 		/* Skyhawk EQ_DB has a provision to set the rearm to interrupt | 
 | 		 * delay via a delay multiplier encoding value | 
 | 		 */ | 
 | 		if (skyhawk_chip(adapter)) | 
 | 			mult_enc = be_get_eq_delay_mult_enc(eqo); | 
 |  | 
 | 		be_eq_notify(adapter, eqo->q.id, true, false, num_evts, | 
 | 			     mult_enc); | 
 | 	} else { | 
 | 		/* As we'll continue in polling mode, count and clear events */ | 
 | 		be_eq_notify(adapter, eqo->q.id, false, false, num_evts, 0); | 
 | 	} | 
 | 	return max_work; | 
 | } | 
 |  | 
 | void be_detect_error(struct be_adapter *adapter) | 
 | { | 
 | 	u32 ue_lo = 0, ue_hi = 0, ue_lo_mask = 0, ue_hi_mask = 0; | 
 | 	u32 sliport_status = 0, sliport_err1 = 0, sliport_err2 = 0; | 
 | 	struct device *dev = &adapter->pdev->dev; | 
 | 	u16 val; | 
 | 	u32 i; | 
 |  | 
 | 	if (be_check_error(adapter, BE_ERROR_HW)) | 
 | 		return; | 
 |  | 
 | 	if (lancer_chip(adapter)) { | 
 | 		sliport_status = ioread32(adapter->db + SLIPORT_STATUS_OFFSET); | 
 | 		if (sliport_status & SLIPORT_STATUS_ERR_MASK) { | 
 | 			be_set_error(adapter, BE_ERROR_UE); | 
 | 			sliport_err1 = ioread32(adapter->db + | 
 | 						SLIPORT_ERROR1_OFFSET); | 
 | 			sliport_err2 = ioread32(adapter->db + | 
 | 						SLIPORT_ERROR2_OFFSET); | 
 | 			/* Do not log error messages if its a FW reset */ | 
 | 			if (sliport_err1 == SLIPORT_ERROR_FW_RESET1 && | 
 | 			    sliport_err2 == SLIPORT_ERROR_FW_RESET2) { | 
 | 				dev_info(dev, "Firmware update in progress\n"); | 
 | 			} else { | 
 | 				dev_err(dev, "Error detected in the card\n"); | 
 | 				dev_err(dev, "ERR: sliport status 0x%x\n", | 
 | 					sliport_status); | 
 | 				dev_err(dev, "ERR: sliport error1 0x%x\n", | 
 | 					sliport_err1); | 
 | 				dev_err(dev, "ERR: sliport error2 0x%x\n", | 
 | 					sliport_err2); | 
 | 			} | 
 | 		} | 
 | 	} else { | 
 | 		ue_lo = ioread32(adapter->pcicfg + PCICFG_UE_STATUS_LOW); | 
 | 		ue_hi = ioread32(adapter->pcicfg + PCICFG_UE_STATUS_HIGH); | 
 | 		ue_lo_mask = ioread32(adapter->pcicfg + | 
 | 				      PCICFG_UE_STATUS_LOW_MASK); | 
 | 		ue_hi_mask = ioread32(adapter->pcicfg + | 
 | 				      PCICFG_UE_STATUS_HI_MASK); | 
 |  | 
 | 		ue_lo = (ue_lo & ~ue_lo_mask); | 
 | 		ue_hi = (ue_hi & ~ue_hi_mask); | 
 |  | 
 | 		if (ue_lo || ue_hi) { | 
 | 			/* On certain platforms BE3 hardware can indicate | 
 | 			 * spurious UEs. In case of a UE in the chip, | 
 | 			 * the POST register correctly reports either a | 
 | 			 * FAT_LOG_START state (FW is currently dumping | 
 | 			 * FAT log data) or a ARMFW_UE state. Check for the | 
 | 			 * above states to ascertain if the UE is valid or not. | 
 | 			 */ | 
 | 			if (BE3_chip(adapter)) { | 
 | 				val = be_POST_stage_get(adapter); | 
 | 				if ((val & POST_STAGE_FAT_LOG_START) | 
 | 				     != POST_STAGE_FAT_LOG_START && | 
 | 				    (val & POST_STAGE_ARMFW_UE) | 
 | 				     != POST_STAGE_ARMFW_UE) | 
 | 					return; | 
 | 			} | 
 |  | 
 | 			dev_err(dev, "Error detected in the adapter"); | 
 | 			be_set_error(adapter, BE_ERROR_UE); | 
 |  | 
 | 			for (i = 0; ue_lo; ue_lo >>= 1, i++) { | 
 | 				if (ue_lo & 1) | 
 | 					dev_err(dev, "UE: %s bit set\n", | 
 | 						ue_status_low_desc[i]); | 
 | 			} | 
 | 			for (i = 0; ue_hi; ue_hi >>= 1, i++) { | 
 | 				if (ue_hi & 1) | 
 | 					dev_err(dev, "UE: %s bit set\n", | 
 | 						ue_status_hi_desc[i]); | 
 | 			} | 
 | 		} | 
 | 	} | 
 | } | 
 |  | 
 | static void be_msix_disable(struct be_adapter *adapter) | 
 | { | 
 | 	if (msix_enabled(adapter)) { | 
 | 		pci_disable_msix(adapter->pdev); | 
 | 		adapter->num_msix_vec = 0; | 
 | 		adapter->num_msix_roce_vec = 0; | 
 | 	} | 
 | } | 
 |  | 
 | static int be_msix_enable(struct be_adapter *adapter) | 
 | { | 
 | 	unsigned int i, max_roce_eqs; | 
 | 	struct device *dev = &adapter->pdev->dev; | 
 | 	int num_vec; | 
 |  | 
 | 	/* If RoCE is supported, program the max number of vectors that | 
 | 	 * could be used for NIC and RoCE, else, just program the number | 
 | 	 * we'll use initially. | 
 | 	 */ | 
 | 	if (be_roce_supported(adapter)) { | 
 | 		max_roce_eqs = | 
 | 			be_max_func_eqs(adapter) - be_max_nic_eqs(adapter); | 
 | 		max_roce_eqs = min(max_roce_eqs, num_online_cpus()); | 
 | 		num_vec = be_max_any_irqs(adapter) + max_roce_eqs; | 
 | 	} else { | 
 | 		num_vec = max(adapter->cfg_num_rx_irqs, | 
 | 			      adapter->cfg_num_tx_irqs); | 
 | 	} | 
 |  | 
 | 	for (i = 0; i < num_vec; i++) | 
 | 		adapter->msix_entries[i].entry = i; | 
 |  | 
 | 	num_vec = pci_enable_msix_range(adapter->pdev, adapter->msix_entries, | 
 | 					MIN_MSIX_VECTORS, num_vec); | 
 | 	if (num_vec < 0) | 
 | 		goto fail; | 
 |  | 
 | 	if (be_roce_supported(adapter) && num_vec > MIN_MSIX_VECTORS) { | 
 | 		adapter->num_msix_roce_vec = num_vec / 2; | 
 | 		dev_info(dev, "enabled %d MSI-x vector(s) for RoCE\n", | 
 | 			 adapter->num_msix_roce_vec); | 
 | 	} | 
 |  | 
 | 	adapter->num_msix_vec = num_vec - adapter->num_msix_roce_vec; | 
 |  | 
 | 	dev_info(dev, "enabled %d MSI-x vector(s) for NIC\n", | 
 | 		 adapter->num_msix_vec); | 
 | 	return 0; | 
 |  | 
 | fail: | 
 | 	dev_warn(dev, "MSIx enable failed\n"); | 
 |  | 
 | 	/* INTx is not supported in VFs, so fail probe if enable_msix fails */ | 
 | 	if (be_virtfn(adapter)) | 
 | 		return num_vec; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static inline int be_msix_vec_get(struct be_adapter *adapter, | 
 | 				  struct be_eq_obj *eqo) | 
 | { | 
 | 	return adapter->msix_entries[eqo->msix_idx].vector; | 
 | } | 
 |  | 
 | static int be_msix_register(struct be_adapter *adapter) | 
 | { | 
 | 	struct net_device *netdev = adapter->netdev; | 
 | 	struct be_eq_obj *eqo; | 
 | 	int status, i, vec; | 
 |  | 
 | 	for_all_evt_queues(adapter, eqo, i) { | 
 | 		sprintf(eqo->desc, "%s-q%d", netdev->name, i); | 
 | 		vec = be_msix_vec_get(adapter, eqo); | 
 | 		status = request_irq(vec, be_msix, 0, eqo->desc, eqo); | 
 | 		if (status) | 
 | 			goto err_msix; | 
 |  | 
 | 		irq_set_affinity_hint(vec, eqo->affinity_mask); | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | err_msix: | 
 | 	for (i--; i >= 0; i--) { | 
 | 		eqo = &adapter->eq_obj[i]; | 
 | 		free_irq(be_msix_vec_get(adapter, eqo), eqo); | 
 | 	} | 
 | 	dev_warn(&adapter->pdev->dev, "MSIX Request IRQ failed - err %d\n", | 
 | 		 status); | 
 | 	be_msix_disable(adapter); | 
 | 	return status; | 
 | } | 
 |  | 
 | static int be_irq_register(struct be_adapter *adapter) | 
 | { | 
 | 	struct net_device *netdev = adapter->netdev; | 
 | 	int status; | 
 |  | 
 | 	if (msix_enabled(adapter)) { | 
 | 		status = be_msix_register(adapter); | 
 | 		if (status == 0) | 
 | 			goto done; | 
 | 		/* INTx is not supported for VF */ | 
 | 		if (be_virtfn(adapter)) | 
 | 			return status; | 
 | 	} | 
 |  | 
 | 	/* INTx: only the first EQ is used */ | 
 | 	netdev->irq = adapter->pdev->irq; | 
 | 	status = request_irq(netdev->irq, be_intx, IRQF_SHARED, netdev->name, | 
 | 			     &adapter->eq_obj[0]); | 
 | 	if (status) { | 
 | 		dev_err(&adapter->pdev->dev, | 
 | 			"INTx request IRQ failed - err %d\n", status); | 
 | 		return status; | 
 | 	} | 
 | done: | 
 | 	adapter->isr_registered = true; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void be_irq_unregister(struct be_adapter *adapter) | 
 | { | 
 | 	struct net_device *netdev = adapter->netdev; | 
 | 	struct be_eq_obj *eqo; | 
 | 	int i, vec; | 
 |  | 
 | 	if (!adapter->isr_registered) | 
 | 		return; | 
 |  | 
 | 	/* INTx */ | 
 | 	if (!msix_enabled(adapter)) { | 
 | 		free_irq(netdev->irq, &adapter->eq_obj[0]); | 
 | 		goto done; | 
 | 	} | 
 |  | 
 | 	/* MSIx */ | 
 | 	for_all_evt_queues(adapter, eqo, i) { | 
 | 		vec = be_msix_vec_get(adapter, eqo); | 
 | 		irq_set_affinity_hint(vec, NULL); | 
 | 		free_irq(vec, eqo); | 
 | 	} | 
 |  | 
 | done: | 
 | 	adapter->isr_registered = false; | 
 | } | 
 |  | 
 | static void be_rx_qs_destroy(struct be_adapter *adapter) | 
 | { | 
 | 	struct rss_info *rss = &adapter->rss_info; | 
 | 	struct be_queue_info *q; | 
 | 	struct be_rx_obj *rxo; | 
 | 	int i; | 
 |  | 
 | 	for_all_rx_queues(adapter, rxo, i) { | 
 | 		q = &rxo->q; | 
 | 		if (q->created) { | 
 | 			/* If RXQs are destroyed while in an "out of buffer" | 
 | 			 * state, there is a possibility of an HW stall on | 
 | 			 * Lancer. So, post 64 buffers to each queue to relieve | 
 | 			 * the "out of buffer" condition. | 
 | 			 * Make sure there's space in the RXQ before posting. | 
 | 			 */ | 
 | 			if (lancer_chip(adapter)) { | 
 | 				be_rx_cq_clean(rxo); | 
 | 				if (atomic_read(&q->used) == 0) | 
 | 					be_post_rx_frags(rxo, GFP_KERNEL, | 
 | 							 MAX_RX_POST); | 
 | 			} | 
 |  | 
 | 			be_cmd_rxq_destroy(adapter, q); | 
 | 			be_rx_cq_clean(rxo); | 
 | 			be_rxq_clean(rxo); | 
 | 		} | 
 | 		be_queue_free(adapter, q); | 
 | 	} | 
 |  | 
 | 	if (rss->rss_flags) { | 
 | 		rss->rss_flags = RSS_ENABLE_NONE; | 
 | 		be_cmd_rss_config(adapter, rss->rsstable, rss->rss_flags, | 
 | 				  128, rss->rss_hkey); | 
 | 	} | 
 | } | 
 |  | 
 | static void be_disable_if_filters(struct be_adapter *adapter) | 
 | { | 
 | 	/* Don't delete MAC on BE3 VFs without FILTMGMT privilege  */ | 
 | 	if (!BEx_chip(adapter) || !be_virtfn(adapter) || | 
 | 	    check_privilege(adapter, BE_PRIV_FILTMGMT)) { | 
 | 		be_dev_mac_del(adapter, adapter->pmac_id[0]); | 
 | 		eth_zero_addr(adapter->dev_mac); | 
 | 	} | 
 |  | 
 | 	be_clear_uc_list(adapter); | 
 | 	be_clear_mc_list(adapter); | 
 |  | 
 | 	/* The IFACE flags are enabled in the open path and cleared | 
 | 	 * in the close path. When a VF gets detached from the host and | 
 | 	 * assigned to a VM the following happens: | 
 | 	 *	- VF's IFACE flags get cleared in the detach path | 
 | 	 *	- IFACE create is issued by the VF in the attach path | 
 | 	 * Due to a bug in the BE3/Skyhawk-R FW | 
 | 	 * (Lancer FW doesn't have the bug), the IFACE capability flags | 
 | 	 * specified along with the IFACE create cmd issued by a VF are not | 
 | 	 * honoured by FW.  As a consequence, if a *new* driver | 
 | 	 * (that enables/disables IFACE flags in open/close) | 
 | 	 * is loaded in the host and an *old* driver is * used by a VM/VF, | 
 | 	 * the IFACE gets created *without* the needed flags. | 
 | 	 * To avoid this, disable RX-filter flags only for Lancer. | 
 | 	 */ | 
 | 	if (lancer_chip(adapter)) { | 
 | 		be_cmd_rx_filter(adapter, BE_IF_ALL_FILT_FLAGS, OFF); | 
 | 		adapter->if_flags &= ~BE_IF_ALL_FILT_FLAGS; | 
 | 	} | 
 | } | 
 |  | 
 | static int be_close(struct net_device *netdev) | 
 | { | 
 | 	struct be_adapter *adapter = netdev_priv(netdev); | 
 | 	struct be_eq_obj *eqo; | 
 | 	int i; | 
 |  | 
 | 	/* This protection is needed as be_close() may be called even when the | 
 | 	 * adapter is in cleared state (after eeh perm failure) | 
 | 	 */ | 
 | 	if (!(adapter->flags & BE_FLAGS_SETUP_DONE)) | 
 | 		return 0; | 
 |  | 
 | 	/* Before attempting cleanup ensure all the pending cmds in the | 
 | 	 * config_wq have finished execution | 
 | 	 */ | 
 | 	flush_workqueue(be_wq); | 
 |  | 
 | 	be_disable_if_filters(adapter); | 
 |  | 
 | 	if (adapter->flags & BE_FLAGS_NAPI_ENABLED) { | 
 | 		for_all_evt_queues(adapter, eqo, i) { | 
 | 			napi_disable(&eqo->napi); | 
 | 		} | 
 | 		adapter->flags &= ~BE_FLAGS_NAPI_ENABLED; | 
 | 	} | 
 |  | 
 | 	be_async_mcc_disable(adapter); | 
 |  | 
 | 	/* Wait for all pending tx completions to arrive so that | 
 | 	 * all tx skbs are freed. | 
 | 	 */ | 
 | 	netif_tx_disable(netdev); | 
 | 	be_tx_compl_clean(adapter); | 
 |  | 
 | 	be_rx_qs_destroy(adapter); | 
 |  | 
 | 	for_all_evt_queues(adapter, eqo, i) { | 
 | 		if (msix_enabled(adapter)) | 
 | 			synchronize_irq(be_msix_vec_get(adapter, eqo)); | 
 | 		else | 
 | 			synchronize_irq(netdev->irq); | 
 | 		be_eq_clean(eqo); | 
 | 	} | 
 |  | 
 | 	be_irq_unregister(adapter); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int be_rx_qs_create(struct be_adapter *adapter) | 
 | { | 
 | 	struct rss_info *rss = &adapter->rss_info; | 
 | 	u8 rss_key[RSS_HASH_KEY_LEN]; | 
 | 	struct be_rx_obj *rxo; | 
 | 	int rc, i, j; | 
 |  | 
 | 	for_all_rx_queues(adapter, rxo, i) { | 
 | 		rc = be_queue_alloc(adapter, &rxo->q, RX_Q_LEN, | 
 | 				    sizeof(struct be_eth_rx_d)); | 
 | 		if (rc) | 
 | 			return rc; | 
 | 	} | 
 |  | 
 | 	if (adapter->need_def_rxq || !adapter->num_rss_qs) { | 
 | 		rxo = default_rxo(adapter); | 
 | 		rc = be_cmd_rxq_create(adapter, &rxo->q, rxo->cq.id, | 
 | 				       rx_frag_size, adapter->if_handle, | 
 | 				       false, &rxo->rss_id); | 
 | 		if (rc) | 
 | 			return rc; | 
 | 	} | 
 |  | 
 | 	for_all_rss_queues(adapter, rxo, i) { | 
 | 		rc = be_cmd_rxq_create(adapter, &rxo->q, rxo->cq.id, | 
 | 				       rx_frag_size, adapter->if_handle, | 
 | 				       true, &rxo->rss_id); | 
 | 		if (rc) | 
 | 			return rc; | 
 | 	} | 
 |  | 
 | 	if (be_multi_rxq(adapter)) { | 
 | 		for (j = 0; j < RSS_INDIR_TABLE_LEN; j += adapter->num_rss_qs) { | 
 | 			for_all_rss_queues(adapter, rxo, i) { | 
 | 				if ((j + i) >= RSS_INDIR_TABLE_LEN) | 
 | 					break; | 
 | 				rss->rsstable[j + i] = rxo->rss_id; | 
 | 				rss->rss_queue[j + i] = i; | 
 | 			} | 
 | 		} | 
 | 		rss->rss_flags = RSS_ENABLE_TCP_IPV4 | RSS_ENABLE_IPV4 | | 
 | 			RSS_ENABLE_TCP_IPV6 | RSS_ENABLE_IPV6; | 
 |  | 
 | 		if (!BEx_chip(adapter)) | 
 | 			rss->rss_flags |= RSS_ENABLE_UDP_IPV4 | | 
 | 				RSS_ENABLE_UDP_IPV6; | 
 |  | 
 | 		netdev_rss_key_fill(rss_key, RSS_HASH_KEY_LEN); | 
 | 		rc = be_cmd_rss_config(adapter, rss->rsstable, rss->rss_flags, | 
 | 				       RSS_INDIR_TABLE_LEN, rss_key); | 
 | 		if (rc) { | 
 | 			rss->rss_flags = RSS_ENABLE_NONE; | 
 | 			return rc; | 
 | 		} | 
 |  | 
 | 		memcpy(rss->rss_hkey, rss_key, RSS_HASH_KEY_LEN); | 
 | 	} else { | 
 | 		/* Disable RSS, if only default RX Q is created */ | 
 | 		rss->rss_flags = RSS_ENABLE_NONE; | 
 | 	} | 
 |  | 
 |  | 
 | 	/* Post 1 less than RXQ-len to avoid head being equal to tail, | 
 | 	 * which is a queue empty condition | 
 | 	 */ | 
 | 	for_all_rx_queues(adapter, rxo, i) | 
 | 		be_post_rx_frags(rxo, GFP_KERNEL, RX_Q_LEN - 1); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int be_enable_if_filters(struct be_adapter *adapter) | 
 | { | 
 | 	int status; | 
 |  | 
 | 	status = be_cmd_rx_filter(adapter, BE_IF_FILT_FLAGS_BASIC, ON); | 
 | 	if (status) | 
 | 		return status; | 
 |  | 
 | 	/* Normally this condition usually true as the ->dev_mac is zeroed. | 
 | 	 * But on BE3 VFs the initial MAC is pre-programmed by PF and | 
 | 	 * subsequent be_dev_mac_add() can fail (after fresh boot) | 
 | 	 */ | 
 | 	if (!ether_addr_equal(adapter->dev_mac, adapter->netdev->dev_addr)) { | 
 | 		int old_pmac_id = -1; | 
 |  | 
 | 		/* Remember old programmed MAC if any - can happen on BE3 VF */ | 
 | 		if (!is_zero_ether_addr(adapter->dev_mac)) | 
 | 			old_pmac_id = adapter->pmac_id[0]; | 
 |  | 
 | 		status = be_dev_mac_add(adapter, adapter->netdev->dev_addr); | 
 | 		if (status) | 
 | 			return status; | 
 |  | 
 | 		/* Delete the old programmed MAC as we successfully programmed | 
 | 		 * a new MAC | 
 | 		 */ | 
 | 		if (old_pmac_id >= 0 && old_pmac_id != adapter->pmac_id[0]) | 
 | 			be_dev_mac_del(adapter, old_pmac_id); | 
 |  | 
 | 		ether_addr_copy(adapter->dev_mac, adapter->netdev->dev_addr); | 
 | 	} | 
 |  | 
 | 	if (adapter->vlans_added) | 
 | 		be_vid_config(adapter); | 
 |  | 
 | 	__be_set_rx_mode(adapter); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int be_open(struct net_device *netdev) | 
 | { | 
 | 	struct be_adapter *adapter = netdev_priv(netdev); | 
 | 	struct be_eq_obj *eqo; | 
 | 	struct be_rx_obj *rxo; | 
 | 	struct be_tx_obj *txo; | 
 | 	u8 link_status; | 
 | 	int status, i; | 
 |  | 
 | 	status = be_rx_qs_create(adapter); | 
 | 	if (status) | 
 | 		goto err; | 
 |  | 
 | 	status = be_enable_if_filters(adapter); | 
 | 	if (status) | 
 | 		goto err; | 
 |  | 
 | 	status = be_irq_register(adapter); | 
 | 	if (status) | 
 | 		goto err; | 
 |  | 
 | 	for_all_rx_queues(adapter, rxo, i) | 
 | 		be_cq_notify(adapter, rxo->cq.id, true, 0); | 
 |  | 
 | 	for_all_tx_queues(adapter, txo, i) | 
 | 		be_cq_notify(adapter, txo->cq.id, true, 0); | 
 |  | 
 | 	be_async_mcc_enable(adapter); | 
 |  | 
 | 	for_all_evt_queues(adapter, eqo, i) { | 
 | 		napi_enable(&eqo->napi); | 
 | 		be_eq_notify(adapter, eqo->q.id, true, true, 0, 0); | 
 | 	} | 
 | 	adapter->flags |= BE_FLAGS_NAPI_ENABLED; | 
 |  | 
 | 	status = be_cmd_link_status_query(adapter, NULL, &link_status, 0); | 
 | 	if (!status) | 
 | 		be_link_status_update(adapter, link_status); | 
 |  | 
 | 	netif_tx_start_all_queues(netdev); | 
 | 	if (skyhawk_chip(adapter)) | 
 | 		udp_tunnel_get_rx_info(netdev); | 
 |  | 
 | 	return 0; | 
 | err: | 
 | 	be_close(adapter->netdev); | 
 | 	return -EIO; | 
 | } | 
 |  | 
 | static void be_vf_eth_addr_generate(struct be_adapter *adapter, u8 *mac) | 
 | { | 
 | 	u32 addr; | 
 |  | 
 | 	addr = jhash(adapter->netdev->dev_addr, ETH_ALEN, 0); | 
 |  | 
 | 	mac[5] = (u8)(addr & 0xFF); | 
 | 	mac[4] = (u8)((addr >> 8) & 0xFF); | 
 | 	mac[3] = (u8)((addr >> 16) & 0xFF); | 
 | 	/* Use the OUI from the current MAC address */ | 
 | 	memcpy(mac, adapter->netdev->dev_addr, 3); | 
 | } | 
 |  | 
 | /* | 
 |  * Generate a seed MAC address from the PF MAC Address using jhash. | 
 |  * MAC Address for VFs are assigned incrementally starting from the seed. | 
 |  * These addresses are programmed in the ASIC by the PF and the VF driver | 
 |  * queries for the MAC address during its probe. | 
 |  */ | 
 | static int be_vf_eth_addr_config(struct be_adapter *adapter) | 
 | { | 
 | 	u32 vf; | 
 | 	int status = 0; | 
 | 	u8 mac[ETH_ALEN]; | 
 | 	struct be_vf_cfg *vf_cfg; | 
 |  | 
 | 	be_vf_eth_addr_generate(adapter, mac); | 
 |  | 
 | 	for_all_vfs(adapter, vf_cfg, vf) { | 
 | 		if (BEx_chip(adapter)) | 
 | 			status = be_cmd_pmac_add(adapter, mac, | 
 | 						 vf_cfg->if_handle, | 
 | 						 &vf_cfg->pmac_id, vf + 1); | 
 | 		else | 
 | 			status = be_cmd_set_mac(adapter, mac, vf_cfg->if_handle, | 
 | 						vf + 1); | 
 |  | 
 | 		if (status) | 
 | 			dev_err(&adapter->pdev->dev, | 
 | 				"Mac address assignment failed for VF %d\n", | 
 | 				vf); | 
 | 		else | 
 | 			memcpy(vf_cfg->mac_addr, mac, ETH_ALEN); | 
 |  | 
 | 		mac[5] += 1; | 
 | 	} | 
 | 	return status; | 
 | } | 
 |  | 
 | static int be_vfs_mac_query(struct be_adapter *adapter) | 
 | { | 
 | 	int status, vf; | 
 | 	u8 mac[ETH_ALEN]; | 
 | 	struct be_vf_cfg *vf_cfg; | 
 |  | 
 | 	for_all_vfs(adapter, vf_cfg, vf) { | 
 | 		status = be_cmd_get_active_mac(adapter, vf_cfg->pmac_id, | 
 | 					       mac, vf_cfg->if_handle, | 
 | 					       false, vf+1); | 
 | 		if (status) | 
 | 			return status; | 
 | 		memcpy(vf_cfg->mac_addr, mac, ETH_ALEN); | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void be_vf_clear(struct be_adapter *adapter) | 
 | { | 
 | 	struct be_vf_cfg *vf_cfg; | 
 | 	u32 vf; | 
 |  | 
 | 	if (pci_vfs_assigned(adapter->pdev)) { | 
 | 		dev_warn(&adapter->pdev->dev, | 
 | 			 "VFs are assigned to VMs: not disabling VFs\n"); | 
 | 		goto done; | 
 | 	} | 
 |  | 
 | 	pci_disable_sriov(adapter->pdev); | 
 |  | 
 | 	for_all_vfs(adapter, vf_cfg, vf) { | 
 | 		if (BEx_chip(adapter)) | 
 | 			be_cmd_pmac_del(adapter, vf_cfg->if_handle, | 
 | 					vf_cfg->pmac_id, vf + 1); | 
 | 		else | 
 | 			be_cmd_set_mac(adapter, NULL, vf_cfg->if_handle, | 
 | 				       vf + 1); | 
 |  | 
 | 		be_cmd_if_destroy(adapter, vf_cfg->if_handle, vf + 1); | 
 | 	} | 
 |  | 
 | 	if (BE3_chip(adapter)) | 
 | 		be_cmd_set_hsw_config(adapter, 0, 0, | 
 | 				      adapter->if_handle, | 
 | 				      PORT_FWD_TYPE_PASSTHRU, 0); | 
 | done: | 
 | 	kfree(adapter->vf_cfg); | 
 | 	adapter->num_vfs = 0; | 
 | 	adapter->flags &= ~BE_FLAGS_SRIOV_ENABLED; | 
 | } | 
 |  | 
 | static void be_clear_queues(struct be_adapter *adapter) | 
 | { | 
 | 	be_mcc_queues_destroy(adapter); | 
 | 	be_rx_cqs_destroy(adapter); | 
 | 	be_tx_queues_destroy(adapter); | 
 | 	be_evt_queues_destroy(adapter); | 
 | } | 
 |  | 
 | static void be_cancel_worker(struct be_adapter *adapter) | 
 | { | 
 | 	if (adapter->flags & BE_FLAGS_WORKER_SCHEDULED) { | 
 | 		cancel_delayed_work_sync(&adapter->work); | 
 | 		adapter->flags &= ~BE_FLAGS_WORKER_SCHEDULED; | 
 | 	} | 
 | } | 
 |  | 
 | static void be_cancel_err_detection(struct be_adapter *adapter) | 
 | { | 
 | 	struct be_error_recovery *err_rec = &adapter->error_recovery; | 
 |  | 
 | 	if (!be_err_recovery_workq) | 
 | 		return; | 
 |  | 
 | 	if (adapter->flags & BE_FLAGS_ERR_DETECTION_SCHEDULED) { | 
 | 		cancel_delayed_work_sync(&err_rec->err_detection_work); | 
 | 		adapter->flags &= ~BE_FLAGS_ERR_DETECTION_SCHEDULED; | 
 | 	} | 
 | } | 
 |  | 
 | static int be_enable_vxlan_offloads(struct be_adapter *adapter) | 
 | { | 
 | 	struct net_device *netdev = adapter->netdev; | 
 | 	struct device *dev = &adapter->pdev->dev; | 
 | 	struct be_vxlan_port *vxlan_port; | 
 | 	__be16 port; | 
 | 	int status; | 
 |  | 
 | 	vxlan_port = list_first_entry(&adapter->vxlan_port_list, | 
 | 				      struct be_vxlan_port, list); | 
 | 	port = vxlan_port->port; | 
 |  | 
 | 	status = be_cmd_manage_iface(adapter, adapter->if_handle, | 
 | 				     OP_CONVERT_NORMAL_TO_TUNNEL); | 
 | 	if (status) { | 
 | 		dev_warn(dev, "Failed to convert normal interface to tunnel\n"); | 
 | 		return status; | 
 | 	} | 
 | 	adapter->flags |= BE_FLAGS_VXLAN_OFFLOADS; | 
 |  | 
 | 	status = be_cmd_set_vxlan_port(adapter, port); | 
 | 	if (status) { | 
 | 		dev_warn(dev, "Failed to add VxLAN port\n"); | 
 | 		return status; | 
 | 	} | 
 | 	adapter->vxlan_port = port; | 
 |  | 
 | 	netdev->hw_enc_features |= NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM | | 
 | 				   NETIF_F_TSO | NETIF_F_TSO6 | | 
 | 				   NETIF_F_GSO_UDP_TUNNEL; | 
 | 	netdev->hw_features |= NETIF_F_GSO_UDP_TUNNEL; | 
 | 	netdev->features |= NETIF_F_GSO_UDP_TUNNEL; | 
 |  | 
 | 	dev_info(dev, "Enabled VxLAN offloads for UDP port %d\n", | 
 | 		 be16_to_cpu(port)); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void be_disable_vxlan_offloads(struct be_adapter *adapter) | 
 | { | 
 | 	struct net_device *netdev = adapter->netdev; | 
 |  | 
 | 	if (adapter->flags & BE_FLAGS_VXLAN_OFFLOADS) | 
 | 		be_cmd_manage_iface(adapter, adapter->if_handle, | 
 | 				    OP_CONVERT_TUNNEL_TO_NORMAL); | 
 |  | 
 | 	if (adapter->vxlan_port) | 
 | 		be_cmd_set_vxlan_port(adapter, 0); | 
 |  | 
 | 	adapter->flags &= ~BE_FLAGS_VXLAN_OFFLOADS; | 
 | 	adapter->vxlan_port = 0; | 
 |  | 
 | 	netdev->hw_enc_features = 0; | 
 | 	netdev->hw_features &= ~(NETIF_F_GSO_UDP_TUNNEL); | 
 | 	netdev->features &= ~(NETIF_F_GSO_UDP_TUNNEL); | 
 | } | 
 |  | 
 | static void be_calculate_vf_res(struct be_adapter *adapter, u16 num_vfs, | 
 | 				struct be_resources *vft_res) | 
 | { | 
 | 	struct be_resources res = adapter->pool_res; | 
 | 	u32 vf_if_cap_flags = res.vf_if_cap_flags; | 
 | 	struct be_resources res_mod = {0}; | 
 | 	u16 num_vf_qs = 1; | 
 |  | 
 | 	/* Distribute the queue resources among the PF and it's VFs */ | 
 | 	if (num_vfs) { | 
 | 		/* Divide the rx queues evenly among the VFs and the PF, capped | 
 | 		 * at VF-EQ-count. Any remainder queues belong to the PF. | 
 | 		 */ | 
 | 		num_vf_qs = min(SH_VF_MAX_NIC_EQS, | 
 | 				res.max_rss_qs / (num_vfs + 1)); | 
 |  | 
 | 		/* Skyhawk-R chip supports only MAX_PORT_RSS_TABLES | 
 | 		 * RSS Tables per port. Provide RSS on VFs, only if number of | 
 | 		 * VFs requested is less than it's PF Pool's RSS Tables limit. | 
 | 		 */ | 
 | 		if (num_vfs >= be_max_pf_pool_rss_tables(adapter)) | 
 | 			num_vf_qs = 1; | 
 | 	} | 
 |  | 
 | 	/* Resource with fields set to all '1's by GET_PROFILE_CONFIG cmd, | 
 | 	 * which are modifiable using SET_PROFILE_CONFIG cmd. | 
 | 	 */ | 
 | 	be_cmd_get_profile_config(adapter, &res_mod, NULL, ACTIVE_PROFILE_TYPE, | 
 | 				  RESOURCE_MODIFIABLE, 0); | 
 |  | 
 | 	/* If RSS IFACE capability flags are modifiable for a VF, set the | 
 | 	 * capability flag as valid and set RSS and DEFQ_RSS IFACE flags if | 
 | 	 * more than 1 RSSQ is available for a VF. | 
 | 	 * Otherwise, provision only 1 queue pair for VF. | 
 | 	 */ | 
 | 	if (res_mod.vf_if_cap_flags & BE_IF_FLAGS_RSS) { | 
 | 		vft_res->flags |= BIT(IF_CAPS_FLAGS_VALID_SHIFT); | 
 | 		if (num_vf_qs > 1) { | 
 | 			vf_if_cap_flags |= BE_IF_FLAGS_RSS; | 
 | 			if (res.if_cap_flags & BE_IF_FLAGS_DEFQ_RSS) | 
 | 				vf_if_cap_flags |= BE_IF_FLAGS_DEFQ_RSS; | 
 | 		} else { | 
 | 			vf_if_cap_flags &= ~(BE_IF_FLAGS_RSS | | 
 | 					     BE_IF_FLAGS_DEFQ_RSS); | 
 | 		} | 
 | 	} else { | 
 | 		num_vf_qs = 1; | 
 | 	} | 
 |  | 
 | 	if (res_mod.vf_if_cap_flags & BE_IF_FLAGS_VLAN_PROMISCUOUS) { | 
 | 		vft_res->flags |= BIT(IF_CAPS_FLAGS_VALID_SHIFT); | 
 | 		vf_if_cap_flags &= ~BE_IF_FLAGS_VLAN_PROMISCUOUS; | 
 | 	} | 
 |  | 
 | 	vft_res->vf_if_cap_flags = vf_if_cap_flags; | 
 | 	vft_res->max_rx_qs = num_vf_qs; | 
 | 	vft_res->max_rss_qs = num_vf_qs; | 
 | 	vft_res->max_tx_qs = res.max_tx_qs / (num_vfs + 1); | 
 | 	vft_res->max_cq_count = res.max_cq_count / (num_vfs + 1); | 
 |  | 
 | 	/* Distribute unicast MACs, VLANs, IFACE count and MCCQ count equally | 
 | 	 * among the PF and it's VFs, if the fields are changeable | 
 | 	 */ | 
 | 	if (res_mod.max_uc_mac == FIELD_MODIFIABLE) | 
 | 		vft_res->max_uc_mac = res.max_uc_mac / (num_vfs + 1); | 
 |  | 
 | 	if (res_mod.max_vlans == FIELD_MODIFIABLE) | 
 | 		vft_res->max_vlans = res.max_vlans / (num_vfs + 1); | 
 |  | 
 | 	if (res_mod.max_iface_count == FIELD_MODIFIABLE) | 
 | 		vft_res->max_iface_count = res.max_iface_count / (num_vfs + 1); | 
 |  | 
 | 	if (res_mod.max_mcc_count == FIELD_MODIFIABLE) | 
 | 		vft_res->max_mcc_count = res.max_mcc_count / (num_vfs + 1); | 
 | } | 
 |  | 
 | static void be_if_destroy(struct be_adapter *adapter) | 
 | { | 
 | 	be_cmd_if_destroy(adapter, adapter->if_handle,  0); | 
 |  | 
 | 	kfree(adapter->pmac_id); | 
 | 	adapter->pmac_id = NULL; | 
 |  | 
 | 	kfree(adapter->mc_list); | 
 | 	adapter->mc_list = NULL; | 
 |  | 
 | 	kfree(adapter->uc_list); | 
 | 	adapter->uc_list = NULL; | 
 | } | 
 |  | 
 | static int be_clear(struct be_adapter *adapter) | 
 | { | 
 | 	struct pci_dev *pdev = adapter->pdev; | 
 | 	struct  be_resources vft_res = {0}; | 
 |  | 
 | 	be_cancel_worker(adapter); | 
 |  | 
 | 	flush_workqueue(be_wq); | 
 |  | 
 | 	if (sriov_enabled(adapter)) | 
 | 		be_vf_clear(adapter); | 
 |  | 
 | 	/* Re-configure FW to distribute resources evenly across max-supported | 
 | 	 * number of VFs, only when VFs are not already enabled. | 
 | 	 */ | 
 | 	if (skyhawk_chip(adapter) && be_physfn(adapter) && | 
 | 	    !pci_vfs_assigned(pdev)) { | 
 | 		be_calculate_vf_res(adapter, | 
 | 				    pci_sriov_get_totalvfs(pdev), | 
 | 				    &vft_res); | 
 | 		be_cmd_set_sriov_config(adapter, adapter->pool_res, | 
 | 					pci_sriov_get_totalvfs(pdev), | 
 | 					&vft_res); | 
 | 	} | 
 |  | 
 | 	be_disable_vxlan_offloads(adapter); | 
 |  | 
 | 	be_if_destroy(adapter); | 
 |  | 
 | 	be_clear_queues(adapter); | 
 |  | 
 | 	be_msix_disable(adapter); | 
 | 	adapter->flags &= ~BE_FLAGS_SETUP_DONE; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int be_vfs_if_create(struct be_adapter *adapter) | 
 | { | 
 | 	struct be_resources res = {0}; | 
 | 	u32 cap_flags, en_flags, vf; | 
 | 	struct be_vf_cfg *vf_cfg; | 
 | 	int status; | 
 |  | 
 | 	/* If a FW profile exists, then cap_flags are updated */ | 
 | 	cap_flags = BE_VF_IF_EN_FLAGS; | 
 |  | 
 | 	for_all_vfs(adapter, vf_cfg, vf) { | 
 | 		if (!BE3_chip(adapter)) { | 
 | 			status = be_cmd_get_profile_config(adapter, &res, NULL, | 
 | 							   ACTIVE_PROFILE_TYPE, | 
 | 							   RESOURCE_LIMITS, | 
 | 							   vf + 1); | 
 | 			if (!status) { | 
 | 				cap_flags = res.if_cap_flags; | 
 | 				/* Prevent VFs from enabling VLAN promiscuous | 
 | 				 * mode | 
 | 				 */ | 
 | 				cap_flags &= ~BE_IF_FLAGS_VLAN_PROMISCUOUS; | 
 | 			} | 
 | 		} | 
 |  | 
 | 		/* PF should enable IF flags during proxy if_create call */ | 
 | 		en_flags = cap_flags & BE_VF_IF_EN_FLAGS; | 
 | 		status = be_cmd_if_create(adapter, cap_flags, en_flags, | 
 | 					  &vf_cfg->if_handle, vf + 1); | 
 | 		if (status) | 
 | 			return status; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int be_vf_setup_init(struct be_adapter *adapter) | 
 | { | 
 | 	struct be_vf_cfg *vf_cfg; | 
 | 	int vf; | 
 |  | 
 | 	adapter->vf_cfg = kcalloc(adapter->num_vfs, sizeof(*vf_cfg), | 
 | 				  GFP_KERNEL); | 
 | 	if (!adapter->vf_cfg) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	for_all_vfs(adapter, vf_cfg, vf) { | 
 | 		vf_cfg->if_handle = -1; | 
 | 		vf_cfg->pmac_id = -1; | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int be_vf_setup(struct be_adapter *adapter) | 
 | { | 
 | 	struct device *dev = &adapter->pdev->dev; | 
 | 	struct be_vf_cfg *vf_cfg; | 
 | 	int status, old_vfs, vf; | 
 | 	bool spoofchk; | 
 |  | 
 | 	old_vfs = pci_num_vf(adapter->pdev); | 
 |  | 
 | 	status = be_vf_setup_init(adapter); | 
 | 	if (status) | 
 | 		goto err; | 
 |  | 
 | 	if (old_vfs) { | 
 | 		for_all_vfs(adapter, vf_cfg, vf) { | 
 | 			status = be_cmd_get_if_id(adapter, vf_cfg, vf); | 
 | 			if (status) | 
 | 				goto err; | 
 | 		} | 
 |  | 
 | 		status = be_vfs_mac_query(adapter); | 
 | 		if (status) | 
 | 			goto err; | 
 | 	} else { | 
 | 		status = be_vfs_if_create(adapter); | 
 | 		if (status) | 
 | 			goto err; | 
 |  | 
 | 		status = be_vf_eth_addr_config(adapter); | 
 | 		if (status) | 
 | 			goto err; | 
 | 	} | 
 |  | 
 | 	for_all_vfs(adapter, vf_cfg, vf) { | 
 | 		/* Allow VFs to programs MAC/VLAN filters */ | 
 | 		status = be_cmd_get_fn_privileges(adapter, &vf_cfg->privileges, | 
 | 						  vf + 1); | 
 | 		if (!status && !(vf_cfg->privileges & BE_PRIV_FILTMGMT)) { | 
 | 			status = be_cmd_set_fn_privileges(adapter, | 
 | 							  vf_cfg->privileges | | 
 | 							  BE_PRIV_FILTMGMT, | 
 | 							  vf + 1); | 
 | 			if (!status) { | 
 | 				vf_cfg->privileges |= BE_PRIV_FILTMGMT; | 
 | 				dev_info(dev, "VF%d has FILTMGMT privilege\n", | 
 | 					 vf); | 
 | 			} | 
 | 		} | 
 |  | 
 | 		/* Allow full available bandwidth */ | 
 | 		if (!old_vfs) | 
 | 			be_cmd_config_qos(adapter, 0, 0, vf + 1); | 
 |  | 
 | 		status = be_cmd_get_hsw_config(adapter, NULL, vf + 1, | 
 | 					       vf_cfg->if_handle, NULL, | 
 | 					       &spoofchk); | 
 | 		if (!status) | 
 | 			vf_cfg->spoofchk = spoofchk; | 
 |  | 
 | 		if (!old_vfs) { | 
 | 			be_cmd_enable_vf(adapter, vf + 1); | 
 | 			be_cmd_set_logical_link_config(adapter, | 
 | 						       IFLA_VF_LINK_STATE_AUTO, | 
 | 						       vf+1); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (!old_vfs) { | 
 | 		status = pci_enable_sriov(adapter->pdev, adapter->num_vfs); | 
 | 		if (status) { | 
 | 			dev_err(dev, "SRIOV enable failed\n"); | 
 | 			adapter->num_vfs = 0; | 
 | 			goto err; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (BE3_chip(adapter)) { | 
 | 		/* On BE3, enable VEB only when SRIOV is enabled */ | 
 | 		status = be_cmd_set_hsw_config(adapter, 0, 0, | 
 | 					       adapter->if_handle, | 
 | 					       PORT_FWD_TYPE_VEB, 0); | 
 | 		if (status) | 
 | 			goto err; | 
 | 	} | 
 |  | 
 | 	adapter->flags |= BE_FLAGS_SRIOV_ENABLED; | 
 | 	return 0; | 
 | err: | 
 | 	dev_err(dev, "VF setup failed\n"); | 
 | 	be_vf_clear(adapter); | 
 | 	return status; | 
 | } | 
 |  | 
 | /* Converting function_mode bits on BE3 to SH mc_type enums */ | 
 |  | 
 | static u8 be_convert_mc_type(u32 function_mode) | 
 | { | 
 | 	if (function_mode & VNIC_MODE && function_mode & QNQ_MODE) | 
 | 		return vNIC1; | 
 | 	else if (function_mode & QNQ_MODE) | 
 | 		return FLEX10; | 
 | 	else if (function_mode & VNIC_MODE) | 
 | 		return vNIC2; | 
 | 	else if (function_mode & UMC_ENABLED) | 
 | 		return UMC; | 
 | 	else | 
 | 		return MC_NONE; | 
 | } | 
 |  | 
 | /* On BE2/BE3 FW does not suggest the supported limits */ | 
 | static void BEx_get_resources(struct be_adapter *adapter, | 
 | 			      struct be_resources *res) | 
 | { | 
 | 	bool use_sriov = adapter->num_vfs ? 1 : 0; | 
 |  | 
 | 	if (be_physfn(adapter)) | 
 | 		res->max_uc_mac = BE_UC_PMAC_COUNT; | 
 | 	else | 
 | 		res->max_uc_mac = BE_VF_UC_PMAC_COUNT; | 
 |  | 
 | 	adapter->mc_type = be_convert_mc_type(adapter->function_mode); | 
 |  | 
 | 	if (be_is_mc(adapter)) { | 
 | 		/* Assuming that there are 4 channels per port, | 
 | 		 * when multi-channel is enabled | 
 | 		 */ | 
 | 		if (be_is_qnq_mode(adapter)) | 
 | 			res->max_vlans = BE_NUM_VLANS_SUPPORTED/8; | 
 | 		else | 
 | 			/* In a non-qnq multichannel mode, the pvid | 
 | 			 * takes up one vlan entry | 
 | 			 */ | 
 | 			res->max_vlans = (BE_NUM_VLANS_SUPPORTED / 4) - 1; | 
 | 	} else { | 
 | 		res->max_vlans = BE_NUM_VLANS_SUPPORTED; | 
 | 	} | 
 |  | 
 | 	res->max_mcast_mac = BE_MAX_MC; | 
 |  | 
 | 	/* 1) For BE3 1Gb ports, FW does not support multiple TXQs | 
 | 	 * 2) Create multiple TX rings on a BE3-R multi-channel interface | 
 | 	 *    *only* if it is RSS-capable. | 
 | 	 */ | 
 | 	if (BE2_chip(adapter) || use_sriov ||  (adapter->port_num > 1) || | 
 | 	    be_virtfn(adapter) || | 
 | 	    (be_is_mc(adapter) && | 
 | 	     !(adapter->function_caps & BE_FUNCTION_CAPS_RSS))) { | 
 | 		res->max_tx_qs = 1; | 
 | 	} else if (adapter->function_caps & BE_FUNCTION_CAPS_SUPER_NIC) { | 
 | 		struct be_resources super_nic_res = {0}; | 
 |  | 
 | 		/* On a SuperNIC profile, the driver needs to use the | 
 | 		 * GET_PROFILE_CONFIG cmd to query the per-function TXQ limits | 
 | 		 */ | 
 | 		be_cmd_get_profile_config(adapter, &super_nic_res, NULL, | 
 | 					  ACTIVE_PROFILE_TYPE, RESOURCE_LIMITS, | 
 | 					  0); | 
 | 		/* Some old versions of BE3 FW don't report max_tx_qs value */ | 
 | 		res->max_tx_qs = super_nic_res.max_tx_qs ? : BE3_MAX_TX_QS; | 
 | 	} else { | 
 | 		res->max_tx_qs = BE3_MAX_TX_QS; | 
 | 	} | 
 |  | 
 | 	if ((adapter->function_caps & BE_FUNCTION_CAPS_RSS) && | 
 | 	    !use_sriov && be_physfn(adapter)) | 
 | 		res->max_rss_qs = (adapter->be3_native) ? | 
 | 					   BE3_MAX_RSS_QS : BE2_MAX_RSS_QS; | 
 | 	res->max_rx_qs = res->max_rss_qs + 1; | 
 |  | 
 | 	if (be_physfn(adapter)) | 
 | 		res->max_evt_qs = (be_max_vfs(adapter) > 0) ? | 
 | 					BE3_SRIOV_MAX_EVT_QS : BE3_MAX_EVT_QS; | 
 | 	else | 
 | 		res->max_evt_qs = 1; | 
 |  | 
 | 	res->if_cap_flags = BE_IF_CAP_FLAGS_WANT; | 
 | 	res->if_cap_flags &= ~BE_IF_FLAGS_DEFQ_RSS; | 
 | 	if (!(adapter->function_caps & BE_FUNCTION_CAPS_RSS)) | 
 | 		res->if_cap_flags &= ~BE_IF_FLAGS_RSS; | 
 | } | 
 |  | 
 | static void be_setup_init(struct be_adapter *adapter) | 
 | { | 
 | 	adapter->vlan_prio_bmap = 0xff; | 
 | 	adapter->phy.link_speed = -1; | 
 | 	adapter->if_handle = -1; | 
 | 	adapter->be3_native = false; | 
 | 	adapter->if_flags = 0; | 
 | 	adapter->phy_state = BE_UNKNOWN_PHY_STATE; | 
 | 	if (be_physfn(adapter)) | 
 | 		adapter->cmd_privileges = MAX_PRIVILEGES; | 
 | 	else | 
 | 		adapter->cmd_privileges = MIN_PRIVILEGES; | 
 | } | 
 |  | 
 | /* HW supports only MAX_PORT_RSS_TABLES RSS Policy Tables per port. | 
 |  * However, this HW limitation is not exposed to the host via any SLI cmd. | 
 |  * As a result, in the case of SRIOV and in particular multi-partition configs | 
 |  * the driver needs to calcuate a proportional share of RSS Tables per PF-pool | 
 |  * for distribution between the VFs. This self-imposed limit will determine the | 
 |  * no: of VFs for which RSS can be enabled. | 
 |  */ | 
 | static void be_calculate_pf_pool_rss_tables(struct be_adapter *adapter) | 
 | { | 
 | 	struct be_port_resources port_res = {0}; | 
 | 	u8 rss_tables_on_port; | 
 | 	u16 max_vfs = be_max_vfs(adapter); | 
 |  | 
 | 	be_cmd_get_profile_config(adapter, NULL, &port_res, SAVED_PROFILE_TYPE, | 
 | 				  RESOURCE_LIMITS, 0); | 
 |  | 
 | 	rss_tables_on_port = MAX_PORT_RSS_TABLES - port_res.nic_pfs; | 
 |  | 
 | 	/* Each PF Pool's RSS Tables limit = | 
 | 	 * PF's Max VFs / Total_Max_VFs on Port * RSS Tables on Port | 
 | 	 */ | 
 | 	adapter->pool_res.max_rss_tables = | 
 | 		max_vfs * rss_tables_on_port / port_res.max_vfs; | 
 | } | 
 |  | 
 | static int be_get_sriov_config(struct be_adapter *adapter) | 
 | { | 
 | 	struct be_resources res = {0}; | 
 | 	int max_vfs, old_vfs; | 
 |  | 
 | 	be_cmd_get_profile_config(adapter, &res, NULL, ACTIVE_PROFILE_TYPE, | 
 | 				  RESOURCE_LIMITS, 0); | 
 |  | 
 | 	/* Some old versions of BE3 FW don't report max_vfs value */ | 
 | 	if (BE3_chip(adapter) && !res.max_vfs) { | 
 | 		max_vfs = pci_sriov_get_totalvfs(adapter->pdev); | 
 | 		res.max_vfs = max_vfs > 0 ? min(MAX_VFS, max_vfs) : 0; | 
 | 	} | 
 |  | 
 | 	adapter->pool_res = res; | 
 |  | 
 | 	/* If during previous unload of the driver, the VFs were not disabled, | 
 | 	 * then we cannot rely on the PF POOL limits for the TotalVFs value. | 
 | 	 * Instead use the TotalVFs value stored in the pci-dev struct. | 
 | 	 */ | 
 | 	old_vfs = pci_num_vf(adapter->pdev); | 
 | 	if (old_vfs) { | 
 | 		dev_info(&adapter->pdev->dev, "%d VFs are already enabled\n", | 
 | 			 old_vfs); | 
 |  | 
 | 		adapter->pool_res.max_vfs = | 
 | 			pci_sriov_get_totalvfs(adapter->pdev); | 
 | 		adapter->num_vfs = old_vfs; | 
 | 	} | 
 |  | 
 | 	if (skyhawk_chip(adapter) && be_max_vfs(adapter) && !old_vfs) { | 
 | 		be_calculate_pf_pool_rss_tables(adapter); | 
 | 		dev_info(&adapter->pdev->dev, | 
 | 			 "RSS can be enabled for all VFs if num_vfs <= %d\n", | 
 | 			 be_max_pf_pool_rss_tables(adapter)); | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void be_alloc_sriov_res(struct be_adapter *adapter) | 
 | { | 
 | 	int old_vfs = pci_num_vf(adapter->pdev); | 
 | 	struct  be_resources vft_res = {0}; | 
 | 	int status; | 
 |  | 
 | 	be_get_sriov_config(adapter); | 
 |  | 
 | 	if (!old_vfs) | 
 | 		pci_sriov_set_totalvfs(adapter->pdev, be_max_vfs(adapter)); | 
 |  | 
 | 	/* When the HW is in SRIOV capable configuration, the PF-pool | 
 | 	 * resources are given to PF during driver load, if there are no | 
 | 	 * old VFs. This facility is not available in BE3 FW. | 
 | 	 * Also, this is done by FW in Lancer chip. | 
 | 	 */ | 
 | 	if (skyhawk_chip(adapter) && be_max_vfs(adapter) && !old_vfs) { | 
 | 		be_calculate_vf_res(adapter, 0, &vft_res); | 
 | 		status = be_cmd_set_sriov_config(adapter, adapter->pool_res, 0, | 
 | 						 &vft_res); | 
 | 		if (status) | 
 | 			dev_err(&adapter->pdev->dev, | 
 | 				"Failed to optimize SRIOV resources\n"); | 
 | 	} | 
 | } | 
 |  | 
 | static int be_get_resources(struct be_adapter *adapter) | 
 | { | 
 | 	struct device *dev = &adapter->pdev->dev; | 
 | 	struct be_resources res = {0}; | 
 | 	int status; | 
 |  | 
 | 	/* For Lancer, SH etc read per-function resource limits from FW. | 
 | 	 * GET_FUNC_CONFIG returns per function guaranteed limits. | 
 | 	 * GET_PROFILE_CONFIG returns PCI-E related limits PF-pool limits | 
 | 	 */ | 
 | 	if (BEx_chip(adapter)) { | 
 | 		BEx_get_resources(adapter, &res); | 
 | 	} else { | 
 | 		status = be_cmd_get_func_config(adapter, &res); | 
 | 		if (status) | 
 | 			return status; | 
 |  | 
 | 		/* If a deafault RXQ must be created, we'll use up one RSSQ*/ | 
 | 		if (res.max_rss_qs && res.max_rss_qs == res.max_rx_qs && | 
 | 		    !(res.if_cap_flags & BE_IF_FLAGS_DEFQ_RSS)) | 
 | 			res.max_rss_qs -= 1; | 
 | 	} | 
 |  | 
 | 	/* If RoCE is supported stash away half the EQs for RoCE */ | 
 | 	res.max_nic_evt_qs = be_roce_supported(adapter) ? | 
 | 				res.max_evt_qs / 2 : res.max_evt_qs; | 
 | 	adapter->res = res; | 
 |  | 
 | 	/* If FW supports RSS default queue, then skip creating non-RSS | 
 | 	 * queue for non-IP traffic. | 
 | 	 */ | 
 | 	adapter->need_def_rxq = (be_if_cap_flags(adapter) & | 
 | 				 BE_IF_FLAGS_DEFQ_RSS) ? 0 : 1; | 
 |  | 
 | 	dev_info(dev, "Max: txqs %d, rxqs %d, rss %d, eqs %d, vfs %d\n", | 
 | 		 be_max_txqs(adapter), be_max_rxqs(adapter), | 
 | 		 be_max_rss(adapter), be_max_nic_eqs(adapter), | 
 | 		 be_max_vfs(adapter)); | 
 | 	dev_info(dev, "Max: uc-macs %d, mc-macs %d, vlans %d\n", | 
 | 		 be_max_uc(adapter), be_max_mc(adapter), | 
 | 		 be_max_vlans(adapter)); | 
 |  | 
 | 	/* Ensure RX and TX queues are created in pairs at init time */ | 
 | 	adapter->cfg_num_rx_irqs = | 
 | 				min_t(u16, netif_get_num_default_rss_queues(), | 
 | 				      be_max_qp_irqs(adapter)); | 
 | 	adapter->cfg_num_tx_irqs = adapter->cfg_num_rx_irqs; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int be_get_config(struct be_adapter *adapter) | 
 | { | 
 | 	int status, level; | 
 | 	u16 profile_id; | 
 |  | 
 | 	status = be_cmd_get_cntl_attributes(adapter); | 
 | 	if (status) | 
 | 		return status; | 
 |  | 
 | 	status = be_cmd_query_fw_cfg(adapter); | 
 | 	if (status) | 
 | 		return status; | 
 |  | 
 | 	if (!lancer_chip(adapter) && be_physfn(adapter)) | 
 | 		be_cmd_get_fat_dump_len(adapter, &adapter->fat_dump_len); | 
 |  | 
 | 	if (BEx_chip(adapter)) { | 
 | 		level = be_cmd_get_fw_log_level(adapter); | 
 | 		adapter->msg_enable = | 
 | 			level <= FW_LOG_LEVEL_DEFAULT ? NETIF_MSG_HW : 0; | 
 | 	} | 
 |  | 
 | 	be_cmd_get_acpi_wol_cap(adapter); | 
 | 	pci_enable_wake(adapter->pdev, PCI_D3hot, adapter->wol_en); | 
 | 	pci_enable_wake(adapter->pdev, PCI_D3cold, adapter->wol_en); | 
 |  | 
 | 	be_cmd_query_port_name(adapter); | 
 |  | 
 | 	if (be_physfn(adapter)) { | 
 | 		status = be_cmd_get_active_profile(adapter, &profile_id); | 
 | 		if (!status) | 
 | 			dev_info(&adapter->pdev->dev, | 
 | 				 "Using profile 0x%x\n", profile_id); | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int be_mac_setup(struct be_adapter *adapter) | 
 | { | 
 | 	u8 mac[ETH_ALEN]; | 
 | 	int status; | 
 |  | 
 | 	if (is_zero_ether_addr(adapter->netdev->dev_addr)) { | 
 | 		status = be_cmd_get_perm_mac(adapter, mac); | 
 | 		if (status) | 
 | 			return status; | 
 |  | 
 | 		memcpy(adapter->netdev->dev_addr, mac, ETH_ALEN); | 
 | 		memcpy(adapter->netdev->perm_addr, mac, ETH_ALEN); | 
 |  | 
 | 		/* Initial MAC for BE3 VFs is already programmed by PF */ | 
 | 		if (BEx_chip(adapter) && be_virtfn(adapter)) | 
 | 			memcpy(adapter->dev_mac, mac, ETH_ALEN); | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void be_schedule_worker(struct be_adapter *adapter) | 
 | { | 
 | 	queue_delayed_work(be_wq, &adapter->work, msecs_to_jiffies(1000)); | 
 | 	adapter->flags |= BE_FLAGS_WORKER_SCHEDULED; | 
 | } | 
 |  | 
 | static void be_destroy_err_recovery_workq(void) | 
 | { | 
 | 	if (!be_err_recovery_workq) | 
 | 		return; | 
 |  | 
 | 	flush_workqueue(be_err_recovery_workq); | 
 | 	destroy_workqueue(be_err_recovery_workq); | 
 | 	be_err_recovery_workq = NULL; | 
 | } | 
 |  | 
 | static void be_schedule_err_detection(struct be_adapter *adapter, u32 delay) | 
 | { | 
 | 	struct be_error_recovery *err_rec = &adapter->error_recovery; | 
 |  | 
 | 	if (!be_err_recovery_workq) | 
 | 		return; | 
 |  | 
 | 	queue_delayed_work(be_err_recovery_workq, &err_rec->err_detection_work, | 
 | 			   msecs_to_jiffies(delay)); | 
 | 	adapter->flags |= BE_FLAGS_ERR_DETECTION_SCHEDULED; | 
 | } | 
 |  | 
 | static int be_setup_queues(struct be_adapter *adapter) | 
 | { | 
 | 	struct net_device *netdev = adapter->netdev; | 
 | 	int status; | 
 |  | 
 | 	status = be_evt_queues_create(adapter); | 
 | 	if (status) | 
 | 		goto err; | 
 |  | 
 | 	status = be_tx_qs_create(adapter); | 
 | 	if (status) | 
 | 		goto err; | 
 |  | 
 | 	status = be_rx_cqs_create(adapter); | 
 | 	if (status) | 
 | 		goto err; | 
 |  | 
 | 	status = be_mcc_queues_create(adapter); | 
 | 	if (status) | 
 | 		goto err; | 
 |  | 
 | 	status = netif_set_real_num_rx_queues(netdev, adapter->num_rx_qs); | 
 | 	if (status) | 
 | 		goto err; | 
 |  | 
 | 	status = netif_set_real_num_tx_queues(netdev, adapter->num_tx_qs); | 
 | 	if (status) | 
 | 		goto err; | 
 |  | 
 | 	return 0; | 
 | err: | 
 | 	dev_err(&adapter->pdev->dev, "queue_setup failed\n"); | 
 | 	return status; | 
 | } | 
 |  | 
 | static int be_if_create(struct be_adapter *adapter) | 
 | { | 
 | 	u32 en_flags = BE_IF_FLAGS_RSS | BE_IF_FLAGS_DEFQ_RSS; | 
 | 	u32 cap_flags = be_if_cap_flags(adapter); | 
 | 	int status; | 
 |  | 
 | 	/* alloc required memory for other filtering fields */ | 
 | 	adapter->pmac_id = kcalloc(be_max_uc(adapter), | 
 | 				   sizeof(*adapter->pmac_id), GFP_KERNEL); | 
 | 	if (!adapter->pmac_id) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	adapter->mc_list = kcalloc(be_max_mc(adapter), | 
 | 				   sizeof(*adapter->mc_list), GFP_KERNEL); | 
 | 	if (!adapter->mc_list) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	adapter->uc_list = kcalloc(be_max_uc(adapter), | 
 | 				   sizeof(*adapter->uc_list), GFP_KERNEL); | 
 | 	if (!adapter->uc_list) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	if (adapter->cfg_num_rx_irqs == 1) | 
 | 		cap_flags &= ~(BE_IF_FLAGS_DEFQ_RSS | BE_IF_FLAGS_RSS); | 
 |  | 
 | 	en_flags &= cap_flags; | 
 | 	/* will enable all the needed filter flags in be_open() */ | 
 | 	status = be_cmd_if_create(adapter, be_if_cap_flags(adapter), en_flags, | 
 | 				  &adapter->if_handle, 0); | 
 |  | 
 | 	if (status) | 
 | 		return status; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | int be_update_queues(struct be_adapter *adapter) | 
 | { | 
 | 	struct net_device *netdev = adapter->netdev; | 
 | 	int status; | 
 |  | 
 | 	if (netif_running(netdev)) | 
 | 		be_close(netdev); | 
 |  | 
 | 	be_cancel_worker(adapter); | 
 |  | 
 | 	/* If any vectors have been shared with RoCE we cannot re-program | 
 | 	 * the MSIx table. | 
 | 	 */ | 
 | 	if (!adapter->num_msix_roce_vec) | 
 | 		be_msix_disable(adapter); | 
 |  | 
 | 	be_clear_queues(adapter); | 
 | 	status = be_cmd_if_destroy(adapter, adapter->if_handle,  0); | 
 | 	if (status) | 
 | 		return status; | 
 |  | 
 | 	if (!msix_enabled(adapter)) { | 
 | 		status = be_msix_enable(adapter); | 
 | 		if (status) | 
 | 			return status; | 
 | 	} | 
 |  | 
 | 	status = be_if_create(adapter); | 
 | 	if (status) | 
 | 		return status; | 
 |  | 
 | 	status = be_setup_queues(adapter); | 
 | 	if (status) | 
 | 		return status; | 
 |  | 
 | 	be_schedule_worker(adapter); | 
 |  | 
 | 	/* The IF was destroyed and re-created. We need to clear | 
 | 	 * all promiscuous flags valid for the destroyed IF. | 
 | 	 * Without this promisc mode is not restored during | 
 | 	 * be_open() because the driver thinks that it is | 
 | 	 * already enabled in HW. | 
 | 	 */ | 
 | 	adapter->if_flags &= ~BE_IF_FLAGS_ALL_PROMISCUOUS; | 
 |  | 
 | 	if (netif_running(netdev)) | 
 | 		status = be_open(netdev); | 
 |  | 
 | 	return status; | 
 | } | 
 |  | 
 | static inline int fw_major_num(const char *fw_ver) | 
 | { | 
 | 	int fw_major = 0, i; | 
 |  | 
 | 	i = sscanf(fw_ver, "%d.", &fw_major); | 
 | 	if (i != 1) | 
 | 		return 0; | 
 |  | 
 | 	return fw_major; | 
 | } | 
 |  | 
 | /* If it is error recovery, FLR the PF | 
 |  * Else if any VFs are already enabled don't FLR the PF | 
 |  */ | 
 | static bool be_reset_required(struct be_adapter *adapter) | 
 | { | 
 | 	if (be_error_recovering(adapter)) | 
 | 		return true; | 
 | 	else | 
 | 		return pci_num_vf(adapter->pdev) == 0; | 
 | } | 
 |  | 
 | /* Wait for the FW to be ready and perform the required initialization */ | 
 | static int be_func_init(struct be_adapter *adapter) | 
 | { | 
 | 	int status; | 
 |  | 
 | 	status = be_fw_wait_ready(adapter); | 
 | 	if (status) | 
 | 		return status; | 
 |  | 
 | 	/* FW is now ready; clear errors to allow cmds/doorbell */ | 
 | 	be_clear_error(adapter, BE_CLEAR_ALL); | 
 |  | 
 | 	if (be_reset_required(adapter)) { | 
 | 		status = be_cmd_reset_function(adapter); | 
 | 		if (status) | 
 | 			return status; | 
 |  | 
 | 		/* Wait for interrupts to quiesce after an FLR */ | 
 | 		msleep(100); | 
 | 	} | 
 |  | 
 | 	/* Tell FW we're ready to fire cmds */ | 
 | 	status = be_cmd_fw_init(adapter); | 
 | 	if (status) | 
 | 		return status; | 
 |  | 
 | 	/* Allow interrupts for other ULPs running on NIC function */ | 
 | 	be_intr_set(adapter, true); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int be_setup(struct be_adapter *adapter) | 
 | { | 
 | 	struct device *dev = &adapter->pdev->dev; | 
 | 	int status; | 
 |  | 
 | 	status = be_func_init(adapter); | 
 | 	if (status) | 
 | 		return status; | 
 |  | 
 | 	be_setup_init(adapter); | 
 |  | 
 | 	if (!lancer_chip(adapter)) | 
 | 		be_cmd_req_native_mode(adapter); | 
 |  | 
 | 	/* invoke this cmd first to get pf_num and vf_num which are needed | 
 | 	 * for issuing profile related cmds | 
 | 	 */ | 
 | 	if (!BEx_chip(adapter)) { | 
 | 		status = be_cmd_get_func_config(adapter, NULL); | 
 | 		if (status) | 
 | 			return status; | 
 | 	} | 
 |  | 
 | 	status = be_get_config(adapter); | 
 | 	if (status) | 
 | 		goto err; | 
 |  | 
 | 	if (!BE2_chip(adapter) && be_physfn(adapter)) | 
 | 		be_alloc_sriov_res(adapter); | 
 |  | 
 | 	status = be_get_resources(adapter); | 
 | 	if (status) | 
 | 		goto err; | 
 |  | 
 | 	status = be_msix_enable(adapter); | 
 | 	if (status) | 
 | 		goto err; | 
 |  | 
 | 	/* will enable all the needed filter flags in be_open() */ | 
 | 	status = be_if_create(adapter); | 
 | 	if (status) | 
 | 		goto err; | 
 |  | 
 | 	/* Updating real_num_tx/rx_queues() requires rtnl_lock() */ | 
 | 	rtnl_lock(); | 
 | 	status = be_setup_queues(adapter); | 
 | 	rtnl_unlock(); | 
 | 	if (status) | 
 | 		goto err; | 
 |  | 
 | 	be_cmd_get_fn_privileges(adapter, &adapter->cmd_privileges, 0); | 
 |  | 
 | 	status = be_mac_setup(adapter); | 
 | 	if (status) | 
 | 		goto err; | 
 |  | 
 | 	be_cmd_get_fw_ver(adapter); | 
 | 	dev_info(dev, "FW version is %s\n", adapter->fw_ver); | 
 |  | 
 | 	if (BE2_chip(adapter) && fw_major_num(adapter->fw_ver) < 4) { | 
 | 		dev_err(dev, "Firmware on card is old(%s), IRQs may not work", | 
 | 			adapter->fw_ver); | 
 | 		dev_err(dev, "Please upgrade firmware to version >= 4.0\n"); | 
 | 	} | 
 |  | 
 | 	status = be_cmd_set_flow_control(adapter, adapter->tx_fc, | 
 | 					 adapter->rx_fc); | 
 | 	if (status) | 
 | 		be_cmd_get_flow_control(adapter, &adapter->tx_fc, | 
 | 					&adapter->rx_fc); | 
 |  | 
 | 	dev_info(&adapter->pdev->dev, "HW Flow control - TX:%d RX:%d\n", | 
 | 		 adapter->tx_fc, adapter->rx_fc); | 
 |  | 
 | 	if (be_physfn(adapter)) | 
 | 		be_cmd_set_logical_link_config(adapter, | 
 | 					       IFLA_VF_LINK_STATE_AUTO, 0); | 
 |  | 
 | 	/* BE3 EVB echoes broadcast/multicast packets back to PF's vport | 
 | 	 * confusing a linux bridge or OVS that it might be connected to. | 
 | 	 * Set the EVB to PASSTHRU mode which effectively disables the EVB | 
 | 	 * when SRIOV is not enabled. | 
 | 	 */ | 
 | 	if (BE3_chip(adapter)) | 
 | 		be_cmd_set_hsw_config(adapter, 0, 0, adapter->if_handle, | 
 | 				      PORT_FWD_TYPE_PASSTHRU, 0); | 
 |  | 
 | 	if (adapter->num_vfs) | 
 | 		be_vf_setup(adapter); | 
 |  | 
 | 	status = be_cmd_get_phy_info(adapter); | 
 | 	if (!status && be_pause_supported(adapter)) | 
 | 		adapter->phy.fc_autoneg = 1; | 
 |  | 
 | 	if (be_physfn(adapter) && !lancer_chip(adapter)) | 
 | 		be_cmd_set_features(adapter); | 
 |  | 
 | 	be_schedule_worker(adapter); | 
 | 	adapter->flags |= BE_FLAGS_SETUP_DONE; | 
 | 	return 0; | 
 | err: | 
 | 	be_clear(adapter); | 
 | 	return status; | 
 | } | 
 |  | 
 | #ifdef CONFIG_NET_POLL_CONTROLLER | 
 | static void be_netpoll(struct net_device *netdev) | 
 | { | 
 | 	struct be_adapter *adapter = netdev_priv(netdev); | 
 | 	struct be_eq_obj *eqo; | 
 | 	int i; | 
 |  | 
 | 	for_all_evt_queues(adapter, eqo, i) { | 
 | 		be_eq_notify(eqo->adapter, eqo->q.id, false, true, 0, 0); | 
 | 		napi_schedule(&eqo->napi); | 
 | 	} | 
 | } | 
 | #endif | 
 |  | 
 | int be_load_fw(struct be_adapter *adapter, u8 *fw_file) | 
 | { | 
 | 	const struct firmware *fw; | 
 | 	int status; | 
 |  | 
 | 	if (!netif_running(adapter->netdev)) { | 
 | 		dev_err(&adapter->pdev->dev, | 
 | 			"Firmware load not allowed (interface is down)\n"); | 
 | 		return -ENETDOWN; | 
 | 	} | 
 |  | 
 | 	status = request_firmware(&fw, fw_file, &adapter->pdev->dev); | 
 | 	if (status) | 
 | 		goto fw_exit; | 
 |  | 
 | 	dev_info(&adapter->pdev->dev, "Flashing firmware file %s\n", fw_file); | 
 |  | 
 | 	if (lancer_chip(adapter)) | 
 | 		status = lancer_fw_download(adapter, fw); | 
 | 	else | 
 | 		status = be_fw_download(adapter, fw); | 
 |  | 
 | 	if (!status) | 
 | 		be_cmd_get_fw_ver(adapter); | 
 |  | 
 | fw_exit: | 
 | 	release_firmware(fw); | 
 | 	return status; | 
 | } | 
 |  | 
 | static int be_ndo_bridge_setlink(struct net_device *dev, struct nlmsghdr *nlh, | 
 | 				 u16 flags) | 
 | { | 
 | 	struct be_adapter *adapter = netdev_priv(dev); | 
 | 	struct nlattr *attr, *br_spec; | 
 | 	int rem; | 
 | 	int status = 0; | 
 | 	u16 mode = 0; | 
 |  | 
 | 	if (!sriov_enabled(adapter)) | 
 | 		return -EOPNOTSUPP; | 
 |  | 
 | 	br_spec = nlmsg_find_attr(nlh, sizeof(struct ifinfomsg), IFLA_AF_SPEC); | 
 | 	if (!br_spec) | 
 | 		return -EINVAL; | 
 |  | 
 | 	nla_for_each_nested(attr, br_spec, rem) { | 
 | 		if (nla_type(attr) != IFLA_BRIDGE_MODE) | 
 | 			continue; | 
 |  | 
 | 		if (nla_len(attr) < sizeof(mode)) | 
 | 			return -EINVAL; | 
 |  | 
 | 		mode = nla_get_u16(attr); | 
 | 		if (BE3_chip(adapter) && mode == BRIDGE_MODE_VEPA) | 
 | 			return -EOPNOTSUPP; | 
 |  | 
 | 		if (mode != BRIDGE_MODE_VEPA && mode != BRIDGE_MODE_VEB) | 
 | 			return -EINVAL; | 
 |  | 
 | 		status = be_cmd_set_hsw_config(adapter, 0, 0, | 
 | 					       adapter->if_handle, | 
 | 					       mode == BRIDGE_MODE_VEPA ? | 
 | 					       PORT_FWD_TYPE_VEPA : | 
 | 					       PORT_FWD_TYPE_VEB, 0); | 
 | 		if (status) | 
 | 			goto err; | 
 |  | 
 | 		dev_info(&adapter->pdev->dev, "enabled switch mode: %s\n", | 
 | 			 mode == BRIDGE_MODE_VEPA ? "VEPA" : "VEB"); | 
 |  | 
 | 		return status; | 
 | 	} | 
 | err: | 
 | 	dev_err(&adapter->pdev->dev, "Failed to set switch mode %s\n", | 
 | 		mode == BRIDGE_MODE_VEPA ? "VEPA" : "VEB"); | 
 |  | 
 | 	return status; | 
 | } | 
 |  | 
 | static int be_ndo_bridge_getlink(struct sk_buff *skb, u32 pid, u32 seq, | 
 | 				 struct net_device *dev, u32 filter_mask, | 
 | 				 int nlflags) | 
 | { | 
 | 	struct be_adapter *adapter = netdev_priv(dev); | 
 | 	int status = 0; | 
 | 	u8 hsw_mode; | 
 |  | 
 | 	/* BE and Lancer chips support VEB mode only */ | 
 | 	if (BEx_chip(adapter) || lancer_chip(adapter)) { | 
 | 		/* VEB is disabled in non-SR-IOV profiles on BE3/Lancer */ | 
 | 		if (!pci_sriov_get_totalvfs(adapter->pdev)) | 
 | 			return 0; | 
 | 		hsw_mode = PORT_FWD_TYPE_VEB; | 
 | 	} else { | 
 | 		status = be_cmd_get_hsw_config(adapter, NULL, 0, | 
 | 					       adapter->if_handle, &hsw_mode, | 
 | 					       NULL); | 
 | 		if (status) | 
 | 			return 0; | 
 |  | 
 | 		if (hsw_mode == PORT_FWD_TYPE_PASSTHRU) | 
 | 			return 0; | 
 | 	} | 
 |  | 
 | 	return ndo_dflt_bridge_getlink(skb, pid, seq, dev, | 
 | 				       hsw_mode == PORT_FWD_TYPE_VEPA ? | 
 | 				       BRIDGE_MODE_VEPA : BRIDGE_MODE_VEB, | 
 | 				       0, 0, nlflags, filter_mask, NULL); | 
 | } | 
 |  | 
 | static struct be_cmd_work *be_alloc_work(struct be_adapter *adapter, | 
 | 					 void (*func)(struct work_struct *)) | 
 | { | 
 | 	struct be_cmd_work *work; | 
 |  | 
 | 	work = kzalloc(sizeof(*work), GFP_ATOMIC); | 
 | 	if (!work) { | 
 | 		dev_err(&adapter->pdev->dev, | 
 | 			"be_work memory allocation failed\n"); | 
 | 		return NULL; | 
 | 	} | 
 |  | 
 | 	INIT_WORK(&work->work, func); | 
 | 	work->adapter = adapter; | 
 | 	return work; | 
 | } | 
 |  | 
 | /* VxLAN offload Notes: | 
 |  * | 
 |  * The stack defines tunnel offload flags (hw_enc_features) for IP and doesn't | 
 |  * distinguish various types of transports (VxLAN, GRE, NVGRE ..). So, offload | 
 |  * is expected to work across all types of IP tunnels once exported. Skyhawk | 
 |  * supports offloads for either VxLAN or NVGRE, exclusively. So we export VxLAN | 
 |  * offloads in hw_enc_features only when a VxLAN port is added. If other (non | 
 |  * VxLAN) tunnels are configured while VxLAN offloads are enabled, offloads for | 
 |  * those other tunnels are unexported on the fly through ndo_features_check(). | 
 |  * | 
 |  * Skyhawk supports VxLAN offloads only for one UDP dport. So, if the stack | 
 |  * adds more than one port, disable offloads and re-enable them again when | 
 |  * there's only one port left. We maintain a list of ports for this purpose. | 
 |  */ | 
 | static void be_work_add_vxlan_port(struct work_struct *work) | 
 | { | 
 | 	struct be_cmd_work *cmd_work = | 
 | 				container_of(work, struct be_cmd_work, work); | 
 | 	struct be_adapter *adapter = cmd_work->adapter; | 
 | 	struct device *dev = &adapter->pdev->dev; | 
 | 	__be16 port = cmd_work->info.vxlan_port; | 
 | 	struct be_vxlan_port *vxlan_port; | 
 | 	int status; | 
 |  | 
 | 	/* Bump up the alias count if it is an existing port */ | 
 | 	list_for_each_entry(vxlan_port, &adapter->vxlan_port_list, list) { | 
 | 		if (vxlan_port->port == port) { | 
 | 			vxlan_port->port_aliases++; | 
 | 			goto done; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	/* Add a new port to our list. We don't need a lock here since port | 
 | 	 * add/delete are done only in the context of a single-threaded work | 
 | 	 * queue (be_wq). | 
 | 	 */ | 
 | 	vxlan_port = kzalloc(sizeof(*vxlan_port), GFP_KERNEL); | 
 | 	if (!vxlan_port) | 
 | 		goto done; | 
 |  | 
 | 	vxlan_port->port = port; | 
 | 	INIT_LIST_HEAD(&vxlan_port->list); | 
 | 	list_add_tail(&vxlan_port->list, &adapter->vxlan_port_list); | 
 | 	adapter->vxlan_port_count++; | 
 |  | 
 | 	if (adapter->flags & BE_FLAGS_VXLAN_OFFLOADS) { | 
 | 		dev_info(dev, | 
 | 			 "Only one UDP port supported for VxLAN offloads\n"); | 
 | 		dev_info(dev, "Disabling VxLAN offloads\n"); | 
 | 		goto err; | 
 | 	} | 
 |  | 
 | 	if (adapter->vxlan_port_count > 1) | 
 | 		goto done; | 
 |  | 
 | 	status = be_enable_vxlan_offloads(adapter); | 
 | 	if (!status) | 
 | 		goto done; | 
 |  | 
 | err: | 
 | 	be_disable_vxlan_offloads(adapter); | 
 | done: | 
 | 	kfree(cmd_work); | 
 | 	return; | 
 | } | 
 |  | 
 | static void be_work_del_vxlan_port(struct work_struct *work) | 
 | { | 
 | 	struct be_cmd_work *cmd_work = | 
 | 				container_of(work, struct be_cmd_work, work); | 
 | 	struct be_adapter *adapter = cmd_work->adapter; | 
 | 	__be16 port = cmd_work->info.vxlan_port; | 
 | 	struct be_vxlan_port *vxlan_port; | 
 |  | 
 | 	/* Nothing to be done if a port alias is being deleted */ | 
 | 	list_for_each_entry(vxlan_port, &adapter->vxlan_port_list, list) { | 
 | 		if (vxlan_port->port == port) { | 
 | 			if (vxlan_port->port_aliases) { | 
 | 				vxlan_port->port_aliases--; | 
 | 				goto done; | 
 | 			} | 
 | 			break; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	/* No port aliases left; delete the port from the list */ | 
 | 	list_del(&vxlan_port->list); | 
 | 	adapter->vxlan_port_count--; | 
 |  | 
 | 	/* Disable VxLAN offload if this is the offloaded port */ | 
 | 	if (adapter->vxlan_port == vxlan_port->port) { | 
 | 		WARN_ON(adapter->vxlan_port_count); | 
 | 		be_disable_vxlan_offloads(adapter); | 
 | 		dev_info(&adapter->pdev->dev, | 
 | 			 "Disabled VxLAN offloads for UDP port %d\n", | 
 | 			 be16_to_cpu(port)); | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	/* If only 1 port is left, re-enable VxLAN offload */ | 
 | 	if (adapter->vxlan_port_count == 1) | 
 | 		be_enable_vxlan_offloads(adapter); | 
 |  | 
 | out: | 
 | 	kfree(vxlan_port); | 
 | done: | 
 | 	kfree(cmd_work); | 
 | } | 
 |  | 
 | static void be_cfg_vxlan_port(struct net_device *netdev, | 
 | 			      struct udp_tunnel_info *ti, | 
 | 			      void (*func)(struct work_struct *)) | 
 | { | 
 | 	struct be_adapter *adapter = netdev_priv(netdev); | 
 | 	struct be_cmd_work *cmd_work; | 
 |  | 
 | 	if (ti->type != UDP_TUNNEL_TYPE_VXLAN) | 
 | 		return; | 
 |  | 
 | 	if (lancer_chip(adapter) || BEx_chip(adapter) || be_is_mc(adapter)) | 
 | 		return; | 
 |  | 
 | 	cmd_work = be_alloc_work(adapter, func); | 
 | 	if (cmd_work) { | 
 | 		cmd_work->info.vxlan_port = ti->port; | 
 | 		queue_work(be_wq, &cmd_work->work); | 
 | 	} | 
 | } | 
 |  | 
 | static void be_del_vxlan_port(struct net_device *netdev, | 
 | 			      struct udp_tunnel_info *ti) | 
 | { | 
 | 	be_cfg_vxlan_port(netdev, ti, be_work_del_vxlan_port); | 
 | } | 
 |  | 
 | static void be_add_vxlan_port(struct net_device *netdev, | 
 | 			      struct udp_tunnel_info *ti) | 
 | { | 
 | 	be_cfg_vxlan_port(netdev, ti, be_work_add_vxlan_port); | 
 | } | 
 |  | 
 | static netdev_features_t be_features_check(struct sk_buff *skb, | 
 | 					   struct net_device *dev, | 
 | 					   netdev_features_t features) | 
 | { | 
 | 	struct be_adapter *adapter = netdev_priv(dev); | 
 | 	u8 l4_hdr = 0; | 
 |  | 
 | 	if (skb_is_gso(skb)) { | 
 | 		/* IPv6 TSO requests with extension hdrs are a problem | 
 | 		 * to Lancer and BE3 HW. Disable TSO6 feature. | 
 | 		 */ | 
 | 		if (!skyhawk_chip(adapter) && is_ipv6_ext_hdr(skb)) | 
 | 			features &= ~NETIF_F_TSO6; | 
 |  | 
 | 		/* Lancer cannot handle the packet with MSS less than 256. | 
 | 		 * Also it can't handle a TSO packet with a single segment | 
 | 		 * Disable the GSO support in such cases | 
 | 		 */ | 
 | 		if (lancer_chip(adapter) && | 
 | 		    (skb_shinfo(skb)->gso_size < 256 || | 
 | 		     skb_shinfo(skb)->gso_segs == 1)) | 
 | 			features &= ~NETIF_F_GSO_MASK; | 
 | 	} | 
 |  | 
 | 	/* The code below restricts offload features for some tunneled and | 
 | 	 * Q-in-Q packets. | 
 | 	 * Offload features for normal (non tunnel) packets are unchanged. | 
 | 	 */ | 
 | 	features = vlan_features_check(skb, features); | 
 | 	if (!skb->encapsulation || | 
 | 	    !(adapter->flags & BE_FLAGS_VXLAN_OFFLOADS)) | 
 | 		return features; | 
 |  | 
 | 	/* It's an encapsulated packet and VxLAN offloads are enabled. We | 
 | 	 * should disable tunnel offload features if it's not a VxLAN packet, | 
 | 	 * as tunnel offloads have been enabled only for VxLAN. This is done to | 
 | 	 * allow other tunneled traffic like GRE work fine while VxLAN | 
 | 	 * offloads are configured in Skyhawk-R. | 
 | 	 */ | 
 | 	switch (vlan_get_protocol(skb)) { | 
 | 	case htons(ETH_P_IP): | 
 | 		l4_hdr = ip_hdr(skb)->protocol; | 
 | 		break; | 
 | 	case htons(ETH_P_IPV6): | 
 | 		l4_hdr = ipv6_hdr(skb)->nexthdr; | 
 | 		break; | 
 | 	default: | 
 | 		return features; | 
 | 	} | 
 |  | 
 | 	if (l4_hdr != IPPROTO_UDP || | 
 | 	    skb->inner_protocol_type != ENCAP_TYPE_ETHER || | 
 | 	    skb->inner_protocol != htons(ETH_P_TEB) || | 
 | 	    skb_inner_mac_header(skb) - skb_transport_header(skb) != | 
 | 		sizeof(struct udphdr) + sizeof(struct vxlanhdr) || | 
 | 	    !adapter->vxlan_port || | 
 | 	    udp_hdr(skb)->dest != adapter->vxlan_port) | 
 | 		return features & ~(NETIF_F_CSUM_MASK | NETIF_F_GSO_MASK); | 
 |  | 
 | 	return features; | 
 | } | 
 |  | 
 | static int be_get_phys_port_id(struct net_device *dev, | 
 | 			       struct netdev_phys_item_id *ppid) | 
 | { | 
 | 	int i, id_len = CNTL_SERIAL_NUM_WORDS * CNTL_SERIAL_NUM_WORD_SZ + 1; | 
 | 	struct be_adapter *adapter = netdev_priv(dev); | 
 | 	u8 *id; | 
 |  | 
 | 	if (MAX_PHYS_ITEM_ID_LEN < id_len) | 
 | 		return -ENOSPC; | 
 |  | 
 | 	ppid->id[0] = adapter->hba_port_num + 1; | 
 | 	id = &ppid->id[1]; | 
 | 	for (i = CNTL_SERIAL_NUM_WORDS - 1; i >= 0; | 
 | 	     i--, id += CNTL_SERIAL_NUM_WORD_SZ) | 
 | 		memcpy(id, &adapter->serial_num[i], CNTL_SERIAL_NUM_WORD_SZ); | 
 |  | 
 | 	ppid->id_len = id_len; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void be_set_rx_mode(struct net_device *dev) | 
 | { | 
 | 	struct be_adapter *adapter = netdev_priv(dev); | 
 | 	struct be_cmd_work *work; | 
 |  | 
 | 	work = be_alloc_work(adapter, be_work_set_rx_mode); | 
 | 	if (work) | 
 | 		queue_work(be_wq, &work->work); | 
 | } | 
 |  | 
 | static const struct net_device_ops be_netdev_ops = { | 
 | 	.ndo_open		= be_open, | 
 | 	.ndo_stop		= be_close, | 
 | 	.ndo_start_xmit		= be_xmit, | 
 | 	.ndo_set_rx_mode	= be_set_rx_mode, | 
 | 	.ndo_set_mac_address	= be_mac_addr_set, | 
 | 	.ndo_get_stats64	= be_get_stats64, | 
 | 	.ndo_validate_addr	= eth_validate_addr, | 
 | 	.ndo_vlan_rx_add_vid	= be_vlan_add_vid, | 
 | 	.ndo_vlan_rx_kill_vid	= be_vlan_rem_vid, | 
 | 	.ndo_set_vf_mac		= be_set_vf_mac, | 
 | 	.ndo_set_vf_vlan	= be_set_vf_vlan, | 
 | 	.ndo_set_vf_rate	= be_set_vf_tx_rate, | 
 | 	.ndo_get_vf_config	= be_get_vf_config, | 
 | 	.ndo_set_vf_link_state  = be_set_vf_link_state, | 
 | 	.ndo_set_vf_spoofchk    = be_set_vf_spoofchk, | 
 | #ifdef CONFIG_NET_POLL_CONTROLLER | 
 | 	.ndo_poll_controller	= be_netpoll, | 
 | #endif | 
 | 	.ndo_bridge_setlink	= be_ndo_bridge_setlink, | 
 | 	.ndo_bridge_getlink	= be_ndo_bridge_getlink, | 
 | 	.ndo_udp_tunnel_add	= be_add_vxlan_port, | 
 | 	.ndo_udp_tunnel_del	= be_del_vxlan_port, | 
 | 	.ndo_features_check	= be_features_check, | 
 | 	.ndo_get_phys_port_id   = be_get_phys_port_id, | 
 | }; | 
 |  | 
 | static void be_netdev_init(struct net_device *netdev) | 
 | { | 
 | 	struct be_adapter *adapter = netdev_priv(netdev); | 
 |  | 
 | 	netdev->hw_features |= NETIF_F_SG | NETIF_F_TSO | NETIF_F_TSO6 | | 
 | 		NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM | NETIF_F_RXCSUM | | 
 | 		NETIF_F_HW_VLAN_CTAG_TX; | 
 | 	if ((be_if_cap_flags(adapter) & BE_IF_FLAGS_RSS)) | 
 | 		netdev->hw_features |= NETIF_F_RXHASH; | 
 |  | 
 | 	netdev->features |= netdev->hw_features | | 
 | 		NETIF_F_HW_VLAN_CTAG_RX | NETIF_F_HW_VLAN_CTAG_FILTER; | 
 |  | 
 | 	netdev->vlan_features |= NETIF_F_SG | NETIF_F_TSO | NETIF_F_TSO6 | | 
 | 		NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM; | 
 |  | 
 | 	netdev->priv_flags |= IFF_UNICAST_FLT; | 
 |  | 
 | 	netdev->flags |= IFF_MULTICAST; | 
 |  | 
 | 	netif_set_gso_max_size(netdev, BE_MAX_GSO_SIZE - ETH_HLEN); | 
 |  | 
 | 	netdev->netdev_ops = &be_netdev_ops; | 
 |  | 
 | 	netdev->ethtool_ops = &be_ethtool_ops; | 
 |  | 
 | 	/* MTU range: 256 - 9000 */ | 
 | 	netdev->min_mtu = BE_MIN_MTU; | 
 | 	netdev->max_mtu = BE_MAX_MTU; | 
 | } | 
 |  | 
 | static void be_cleanup(struct be_adapter *adapter) | 
 | { | 
 | 	struct net_device *netdev = adapter->netdev; | 
 |  | 
 | 	rtnl_lock(); | 
 | 	netif_device_detach(netdev); | 
 | 	if (netif_running(netdev)) | 
 | 		be_close(netdev); | 
 | 	rtnl_unlock(); | 
 |  | 
 | 	be_clear(adapter); | 
 | } | 
 |  | 
 | static int be_resume(struct be_adapter *adapter) | 
 | { | 
 | 	struct net_device *netdev = adapter->netdev; | 
 | 	int status; | 
 |  | 
 | 	status = be_setup(adapter); | 
 | 	if (status) | 
 | 		return status; | 
 |  | 
 | 	rtnl_lock(); | 
 | 	if (netif_running(netdev)) | 
 | 		status = be_open(netdev); | 
 | 	rtnl_unlock(); | 
 |  | 
 | 	if (status) | 
 | 		return status; | 
 |  | 
 | 	netif_device_attach(netdev); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void be_soft_reset(struct be_adapter *adapter) | 
 | { | 
 | 	u32 val; | 
 |  | 
 | 	dev_info(&adapter->pdev->dev, "Initiating chip soft reset\n"); | 
 | 	val = ioread32(adapter->pcicfg + SLIPORT_SOFTRESET_OFFSET); | 
 | 	val |= SLIPORT_SOFTRESET_SR_MASK; | 
 | 	iowrite32(val, adapter->pcicfg + SLIPORT_SOFTRESET_OFFSET); | 
 | } | 
 |  | 
 | static bool be_err_is_recoverable(struct be_adapter *adapter) | 
 | { | 
 | 	struct be_error_recovery *err_rec = &adapter->error_recovery; | 
 | 	unsigned long initial_idle_time = | 
 | 		msecs_to_jiffies(ERR_RECOVERY_IDLE_TIME); | 
 | 	unsigned long recovery_interval = | 
 | 		msecs_to_jiffies(ERR_RECOVERY_INTERVAL); | 
 | 	u16 ue_err_code; | 
 | 	u32 val; | 
 |  | 
 | 	val = be_POST_stage_get(adapter); | 
 | 	if ((val & POST_STAGE_RECOVERABLE_ERR) != POST_STAGE_RECOVERABLE_ERR) | 
 | 		return false; | 
 | 	ue_err_code = val & POST_ERR_RECOVERY_CODE_MASK; | 
 | 	if (ue_err_code == 0) | 
 | 		return false; | 
 |  | 
 | 	dev_err(&adapter->pdev->dev, "Recoverable HW error code: 0x%x\n", | 
 | 		ue_err_code); | 
 |  | 
 | 	if (time_before_eq(jiffies - err_rec->probe_time, initial_idle_time)) { | 
 | 		dev_err(&adapter->pdev->dev, | 
 | 			"Cannot recover within %lu sec from driver load\n", | 
 | 			jiffies_to_msecs(initial_idle_time) / MSEC_PER_SEC); | 
 | 		return false; | 
 | 	} | 
 |  | 
 | 	if (err_rec->last_recovery_time && time_before_eq( | 
 | 		jiffies - err_rec->last_recovery_time, recovery_interval)) { | 
 | 		dev_err(&adapter->pdev->dev, | 
 | 			"Cannot recover within %lu sec from last recovery\n", | 
 | 			jiffies_to_msecs(recovery_interval) / MSEC_PER_SEC); | 
 | 		return false; | 
 | 	} | 
 |  | 
 | 	if (ue_err_code == err_rec->last_err_code) { | 
 | 		dev_err(&adapter->pdev->dev, | 
 | 			"Cannot recover from a consecutive TPE error\n"); | 
 | 		return false; | 
 | 	} | 
 |  | 
 | 	err_rec->last_recovery_time = jiffies; | 
 | 	err_rec->last_err_code = ue_err_code; | 
 | 	return true; | 
 | } | 
 |  | 
 | static int be_tpe_recover(struct be_adapter *adapter) | 
 | { | 
 | 	struct be_error_recovery *err_rec = &adapter->error_recovery; | 
 | 	int status = -EAGAIN; | 
 | 	u32 val; | 
 |  | 
 | 	switch (err_rec->recovery_state) { | 
 | 	case ERR_RECOVERY_ST_NONE: | 
 | 		err_rec->recovery_state = ERR_RECOVERY_ST_DETECT; | 
 | 		err_rec->resched_delay = ERR_RECOVERY_UE_DETECT_DURATION; | 
 | 		break; | 
 |  | 
 | 	case ERR_RECOVERY_ST_DETECT: | 
 | 		val = be_POST_stage_get(adapter); | 
 | 		if ((val & POST_STAGE_RECOVERABLE_ERR) != | 
 | 		    POST_STAGE_RECOVERABLE_ERR) { | 
 | 			dev_err(&adapter->pdev->dev, | 
 | 				"Unrecoverable HW error detected: 0x%x\n", val); | 
 | 			status = -EINVAL; | 
 | 			err_rec->resched_delay = 0; | 
 | 			break; | 
 | 		} | 
 |  | 
 | 		dev_err(&adapter->pdev->dev, "Recoverable HW error detected\n"); | 
 |  | 
 | 		/* Only PF0 initiates Chip Soft Reset. But PF0 must wait UE2SR | 
 | 		 * milliseconds before it checks for final error status in | 
 | 		 * SLIPORT_SEMAPHORE to determine if recovery criteria is met. | 
 | 		 * If it does, then PF0 initiates a Soft Reset. | 
 | 		 */ | 
 | 		if (adapter->pf_num == 0) { | 
 | 			err_rec->recovery_state = ERR_RECOVERY_ST_RESET; | 
 | 			err_rec->resched_delay = err_rec->ue_to_reset_time - | 
 | 					ERR_RECOVERY_UE_DETECT_DURATION; | 
 | 			break; | 
 | 		} | 
 |  | 
 | 		err_rec->recovery_state = ERR_RECOVERY_ST_PRE_POLL; | 
 | 		err_rec->resched_delay = err_rec->ue_to_poll_time - | 
 | 					ERR_RECOVERY_UE_DETECT_DURATION; | 
 | 		break; | 
 |  | 
 | 	case ERR_RECOVERY_ST_RESET: | 
 | 		if (!be_err_is_recoverable(adapter)) { | 
 | 			dev_err(&adapter->pdev->dev, | 
 | 				"Failed to meet recovery criteria\n"); | 
 | 			status = -EIO; | 
 | 			err_rec->resched_delay = 0; | 
 | 			break; | 
 | 		} | 
 | 		be_soft_reset(adapter); | 
 | 		err_rec->recovery_state = ERR_RECOVERY_ST_PRE_POLL; | 
 | 		err_rec->resched_delay = err_rec->ue_to_poll_time - | 
 | 					err_rec->ue_to_reset_time; | 
 | 		break; | 
 |  | 
 | 	case ERR_RECOVERY_ST_PRE_POLL: | 
 | 		err_rec->recovery_state = ERR_RECOVERY_ST_REINIT; | 
 | 		err_rec->resched_delay = 0; | 
 | 		status = 0;			/* done */ | 
 | 		break; | 
 |  | 
 | 	default: | 
 | 		status = -EINVAL; | 
 | 		err_rec->resched_delay = 0; | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	return status; | 
 | } | 
 |  | 
 | static int be_err_recover(struct be_adapter *adapter) | 
 | { | 
 | 	int status; | 
 |  | 
 | 	if (!lancer_chip(adapter)) { | 
 | 		if (!adapter->error_recovery.recovery_supported || | 
 | 		    adapter->priv_flags & BE_DISABLE_TPE_RECOVERY) | 
 | 			return -EIO; | 
 | 		status = be_tpe_recover(adapter); | 
 | 		if (status) | 
 | 			goto err; | 
 | 	} | 
 |  | 
 | 	/* Wait for adapter to reach quiescent state before | 
 | 	 * destroying queues | 
 | 	 */ | 
 | 	status = be_fw_wait_ready(adapter); | 
 | 	if (status) | 
 | 		goto err; | 
 |  | 
 | 	adapter->flags |= BE_FLAGS_TRY_RECOVERY; | 
 |  | 
 | 	be_cleanup(adapter); | 
 |  | 
 | 	status = be_resume(adapter); | 
 | 	if (status) | 
 | 		goto err; | 
 |  | 
 | 	adapter->flags &= ~BE_FLAGS_TRY_RECOVERY; | 
 |  | 
 | err: | 
 | 	return status; | 
 | } | 
 |  | 
 | static void be_err_detection_task(struct work_struct *work) | 
 | { | 
 | 	struct be_error_recovery *err_rec = | 
 | 			container_of(work, struct be_error_recovery, | 
 | 				     err_detection_work.work); | 
 | 	struct be_adapter *adapter = | 
 | 			container_of(err_rec, struct be_adapter, | 
 | 				     error_recovery); | 
 | 	u32 resched_delay = ERR_RECOVERY_DETECTION_DELAY; | 
 | 	struct device *dev = &adapter->pdev->dev; | 
 | 	int recovery_status; | 
 |  | 
 | 	be_detect_error(adapter); | 
 | 	if (!be_check_error(adapter, BE_ERROR_HW)) | 
 | 		goto reschedule_task; | 
 |  | 
 | 	recovery_status = be_err_recover(adapter); | 
 | 	if (!recovery_status) { | 
 | 		err_rec->recovery_retries = 0; | 
 | 		err_rec->recovery_state = ERR_RECOVERY_ST_NONE; | 
 | 		dev_info(dev, "Adapter recovery successful\n"); | 
 | 		goto reschedule_task; | 
 | 	} else if (!lancer_chip(adapter) && err_rec->resched_delay) { | 
 | 		/* BEx/SH recovery state machine */ | 
 | 		if (adapter->pf_num == 0 && | 
 | 		    err_rec->recovery_state > ERR_RECOVERY_ST_DETECT) | 
 | 			dev_err(&adapter->pdev->dev, | 
 | 				"Adapter recovery in progress\n"); | 
 | 		resched_delay = err_rec->resched_delay; | 
 | 		goto reschedule_task; | 
 | 	} else if (lancer_chip(adapter) && be_virtfn(adapter)) { | 
 | 		/* For VFs, check if PF have allocated resources | 
 | 		 * every second. | 
 | 		 */ | 
 | 		dev_err(dev, "Re-trying adapter recovery\n"); | 
 | 		goto reschedule_task; | 
 | 	} else if (lancer_chip(adapter) && err_rec->recovery_retries++ < | 
 | 		   ERR_RECOVERY_MAX_RETRY_COUNT) { | 
 | 		/* In case of another error during recovery, it takes 30 sec | 
 | 		 * for adapter to come out of error. Retry error recovery after | 
 | 		 * this time interval. | 
 | 		 */ | 
 | 		dev_err(&adapter->pdev->dev, "Re-trying adapter recovery\n"); | 
 | 		resched_delay = ERR_RECOVERY_RETRY_DELAY; | 
 | 		goto reschedule_task; | 
 | 	} else { | 
 | 		dev_err(dev, "Adapter recovery failed\n"); | 
 | 		dev_err(dev, "Please reboot server to recover\n"); | 
 | 	} | 
 |  | 
 | 	return; | 
 |  | 
 | reschedule_task: | 
 | 	be_schedule_err_detection(adapter, resched_delay); | 
 | } | 
 |  | 
 | static void be_log_sfp_info(struct be_adapter *adapter) | 
 | { | 
 | 	int status; | 
 |  | 
 | 	status = be_cmd_query_sfp_info(adapter); | 
 | 	if (!status) { | 
 | 		dev_err(&adapter->pdev->dev, | 
 | 			"Port %c: %s Vendor: %s part no: %s", | 
 | 			adapter->port_name, | 
 | 			be_misconfig_evt_port_state[adapter->phy_state], | 
 | 			adapter->phy.vendor_name, | 
 | 			adapter->phy.vendor_pn); | 
 | 	} | 
 | 	adapter->flags &= ~BE_FLAGS_PHY_MISCONFIGURED; | 
 | } | 
 |  | 
 | static void be_worker(struct work_struct *work) | 
 | { | 
 | 	struct be_adapter *adapter = | 
 | 		container_of(work, struct be_adapter, work.work); | 
 | 	struct be_rx_obj *rxo; | 
 | 	int i; | 
 |  | 
 | 	if (be_physfn(adapter) && | 
 | 	    MODULO(adapter->work_counter, adapter->be_get_temp_freq) == 0) | 
 | 		be_cmd_get_die_temperature(adapter); | 
 |  | 
 | 	/* when interrupts are not yet enabled, just reap any pending | 
 | 	 * mcc completions | 
 | 	 */ | 
 | 	if (!netif_running(adapter->netdev)) { | 
 | 		local_bh_disable(); | 
 | 		be_process_mcc(adapter); | 
 | 		local_bh_enable(); | 
 | 		goto reschedule; | 
 | 	} | 
 |  | 
 | 	if (!adapter->stats_cmd_sent) { | 
 | 		if (lancer_chip(adapter)) | 
 | 			lancer_cmd_get_pport_stats(adapter, | 
 | 						   &adapter->stats_cmd); | 
 | 		else | 
 | 			be_cmd_get_stats(adapter, &adapter->stats_cmd); | 
 | 	} | 
 |  | 
 | 	for_all_rx_queues(adapter, rxo, i) { | 
 | 		/* Replenish RX-queues starved due to memory | 
 | 		 * allocation failures. | 
 | 		 */ | 
 | 		if (rxo->rx_post_starved) | 
 | 			be_post_rx_frags(rxo, GFP_KERNEL, MAX_RX_POST); | 
 | 	} | 
 |  | 
 | 	/* EQ-delay update for Skyhawk is done while notifying EQ */ | 
 | 	if (!skyhawk_chip(adapter)) | 
 | 		be_eqd_update(adapter, false); | 
 |  | 
 | 	if (adapter->flags & BE_FLAGS_PHY_MISCONFIGURED) | 
 | 		be_log_sfp_info(adapter); | 
 |  | 
 | reschedule: | 
 | 	adapter->work_counter++; | 
 | 	queue_delayed_work(be_wq, &adapter->work, msecs_to_jiffies(1000)); | 
 | } | 
 |  | 
 | static void be_unmap_pci_bars(struct be_adapter *adapter) | 
 | { | 
 | 	if (adapter->csr) | 
 | 		pci_iounmap(adapter->pdev, adapter->csr); | 
 | 	if (adapter->db) | 
 | 		pci_iounmap(adapter->pdev, adapter->db); | 
 | 	if (adapter->pcicfg && adapter->pcicfg_mapped) | 
 | 		pci_iounmap(adapter->pdev, adapter->pcicfg); | 
 | } | 
 |  | 
 | static int db_bar(struct be_adapter *adapter) | 
 | { | 
 | 	if (lancer_chip(adapter) || be_virtfn(adapter)) | 
 | 		return 0; | 
 | 	else | 
 | 		return 4; | 
 | } | 
 |  | 
 | static int be_roce_map_pci_bars(struct be_adapter *adapter) | 
 | { | 
 | 	if (skyhawk_chip(adapter)) { | 
 | 		adapter->roce_db.size = 4096; | 
 | 		adapter->roce_db.io_addr = pci_resource_start(adapter->pdev, | 
 | 							      db_bar(adapter)); | 
 | 		adapter->roce_db.total_size = pci_resource_len(adapter->pdev, | 
 | 							       db_bar(adapter)); | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int be_map_pci_bars(struct be_adapter *adapter) | 
 | { | 
 | 	struct pci_dev *pdev = adapter->pdev; | 
 | 	u8 __iomem *addr; | 
 | 	u32 sli_intf; | 
 |  | 
 | 	pci_read_config_dword(adapter->pdev, SLI_INTF_REG_OFFSET, &sli_intf); | 
 | 	adapter->sli_family = (sli_intf & SLI_INTF_FAMILY_MASK) >> | 
 | 				SLI_INTF_FAMILY_SHIFT; | 
 | 	adapter->virtfn = (sli_intf & SLI_INTF_FT_MASK) ? 1 : 0; | 
 |  | 
 | 	if (BEx_chip(adapter) && be_physfn(adapter)) { | 
 | 		adapter->csr = pci_iomap(pdev, 2, 0); | 
 | 		if (!adapter->csr) | 
 | 			return -ENOMEM; | 
 | 	} | 
 |  | 
 | 	addr = pci_iomap(pdev, db_bar(adapter), 0); | 
 | 	if (!addr) | 
 | 		goto pci_map_err; | 
 | 	adapter->db = addr; | 
 |  | 
 | 	if (skyhawk_chip(adapter) || BEx_chip(adapter)) { | 
 | 		if (be_physfn(adapter)) { | 
 | 			/* PCICFG is the 2nd BAR in BE2 */ | 
 | 			addr = pci_iomap(pdev, BE2_chip(adapter) ? 1 : 0, 0); | 
 | 			if (!addr) | 
 | 				goto pci_map_err; | 
 | 			adapter->pcicfg = addr; | 
 | 			adapter->pcicfg_mapped = true; | 
 | 		} else { | 
 | 			adapter->pcicfg = adapter->db + SRIOV_VF_PCICFG_OFFSET; | 
 | 			adapter->pcicfg_mapped = false; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	be_roce_map_pci_bars(adapter); | 
 | 	return 0; | 
 |  | 
 | pci_map_err: | 
 | 	dev_err(&pdev->dev, "Error in mapping PCI BARs\n"); | 
 | 	be_unmap_pci_bars(adapter); | 
 | 	return -ENOMEM; | 
 | } | 
 |  | 
 | static void be_drv_cleanup(struct be_adapter *adapter) | 
 | { | 
 | 	struct be_dma_mem *mem = &adapter->mbox_mem_alloced; | 
 | 	struct device *dev = &adapter->pdev->dev; | 
 |  | 
 | 	if (mem->va) | 
 | 		dma_free_coherent(dev, mem->size, mem->va, mem->dma); | 
 |  | 
 | 	mem = &adapter->rx_filter; | 
 | 	if (mem->va) | 
 | 		dma_free_coherent(dev, mem->size, mem->va, mem->dma); | 
 |  | 
 | 	mem = &adapter->stats_cmd; | 
 | 	if (mem->va) | 
 | 		dma_free_coherent(dev, mem->size, mem->va, mem->dma); | 
 | } | 
 |  | 
 | /* Allocate and initialize various fields in be_adapter struct */ | 
 | static int be_drv_init(struct be_adapter *adapter) | 
 | { | 
 | 	struct be_dma_mem *mbox_mem_alloc = &adapter->mbox_mem_alloced; | 
 | 	struct be_dma_mem *mbox_mem_align = &adapter->mbox_mem; | 
 | 	struct be_dma_mem *rx_filter = &adapter->rx_filter; | 
 | 	struct be_dma_mem *stats_cmd = &adapter->stats_cmd; | 
 | 	struct device *dev = &adapter->pdev->dev; | 
 | 	int status = 0; | 
 |  | 
 | 	mbox_mem_alloc->size = sizeof(struct be_mcc_mailbox) + 16; | 
 | 	mbox_mem_alloc->va = dma_zalloc_coherent(dev, mbox_mem_alloc->size, | 
 | 						 &mbox_mem_alloc->dma, | 
 | 						 GFP_KERNEL); | 
 | 	if (!mbox_mem_alloc->va) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	mbox_mem_align->size = sizeof(struct be_mcc_mailbox); | 
 | 	mbox_mem_align->va = PTR_ALIGN(mbox_mem_alloc->va, 16); | 
 | 	mbox_mem_align->dma = PTR_ALIGN(mbox_mem_alloc->dma, 16); | 
 |  | 
 | 	rx_filter->size = sizeof(struct be_cmd_req_rx_filter); | 
 | 	rx_filter->va = dma_zalloc_coherent(dev, rx_filter->size, | 
 | 					    &rx_filter->dma, GFP_KERNEL); | 
 | 	if (!rx_filter->va) { | 
 | 		status = -ENOMEM; | 
 | 		goto free_mbox; | 
 | 	} | 
 |  | 
 | 	if (lancer_chip(adapter)) | 
 | 		stats_cmd->size = sizeof(struct lancer_cmd_req_pport_stats); | 
 | 	else if (BE2_chip(adapter)) | 
 | 		stats_cmd->size = sizeof(struct be_cmd_req_get_stats_v0); | 
 | 	else if (BE3_chip(adapter)) | 
 | 		stats_cmd->size = sizeof(struct be_cmd_req_get_stats_v1); | 
 | 	else | 
 | 		stats_cmd->size = sizeof(struct be_cmd_req_get_stats_v2); | 
 | 	stats_cmd->va = dma_zalloc_coherent(dev, stats_cmd->size, | 
 | 					    &stats_cmd->dma, GFP_KERNEL); | 
 | 	if (!stats_cmd->va) { | 
 | 		status = -ENOMEM; | 
 | 		goto free_rx_filter; | 
 | 	} | 
 |  | 
 | 	mutex_init(&adapter->mbox_lock); | 
 | 	mutex_init(&adapter->mcc_lock); | 
 | 	mutex_init(&adapter->rx_filter_lock); | 
 | 	spin_lock_init(&adapter->mcc_cq_lock); | 
 | 	init_completion(&adapter->et_cmd_compl); | 
 |  | 
 | 	pci_save_state(adapter->pdev); | 
 |  | 
 | 	INIT_DELAYED_WORK(&adapter->work, be_worker); | 
 |  | 
 | 	adapter->error_recovery.recovery_state = ERR_RECOVERY_ST_NONE; | 
 | 	adapter->error_recovery.resched_delay = 0; | 
 | 	INIT_DELAYED_WORK(&adapter->error_recovery.err_detection_work, | 
 | 			  be_err_detection_task); | 
 |  | 
 | 	adapter->rx_fc = true; | 
 | 	adapter->tx_fc = true; | 
 |  | 
 | 	/* Must be a power of 2 or else MODULO will BUG_ON */ | 
 | 	adapter->be_get_temp_freq = 64; | 
 |  | 
 | 	INIT_LIST_HEAD(&adapter->vxlan_port_list); | 
 | 	return 0; | 
 |  | 
 | free_rx_filter: | 
 | 	dma_free_coherent(dev, rx_filter->size, rx_filter->va, rx_filter->dma); | 
 | free_mbox: | 
 | 	dma_free_coherent(dev, mbox_mem_alloc->size, mbox_mem_alloc->va, | 
 | 			  mbox_mem_alloc->dma); | 
 | 	return status; | 
 | } | 
 |  | 
 | static void be_remove(struct pci_dev *pdev) | 
 | { | 
 | 	struct be_adapter *adapter = pci_get_drvdata(pdev); | 
 |  | 
 | 	if (!adapter) | 
 | 		return; | 
 |  | 
 | 	be_roce_dev_remove(adapter); | 
 | 	be_intr_set(adapter, false); | 
 |  | 
 | 	be_cancel_err_detection(adapter); | 
 |  | 
 | 	unregister_netdev(adapter->netdev); | 
 |  | 
 | 	be_clear(adapter); | 
 |  | 
 | 	if (!pci_vfs_assigned(adapter->pdev)) | 
 | 		be_cmd_reset_function(adapter); | 
 |  | 
 | 	/* tell fw we're done with firing cmds */ | 
 | 	be_cmd_fw_clean(adapter); | 
 |  | 
 | 	be_unmap_pci_bars(adapter); | 
 | 	be_drv_cleanup(adapter); | 
 |  | 
 | 	pci_disable_pcie_error_reporting(pdev); | 
 |  | 
 | 	pci_release_regions(pdev); | 
 | 	pci_disable_device(pdev); | 
 |  | 
 | 	free_netdev(adapter->netdev); | 
 | } | 
 |  | 
 | static ssize_t be_hwmon_show_temp(struct device *dev, | 
 | 				  struct device_attribute *dev_attr, | 
 | 				  char *buf) | 
 | { | 
 | 	struct be_adapter *adapter = dev_get_drvdata(dev); | 
 |  | 
 | 	/* Unit: millidegree Celsius */ | 
 | 	if (adapter->hwmon_info.be_on_die_temp == BE_INVALID_DIE_TEMP) | 
 | 		return -EIO; | 
 | 	else | 
 | 		return sprintf(buf, "%u\n", | 
 | 			       adapter->hwmon_info.be_on_die_temp * 1000); | 
 | } | 
 |  | 
 | static SENSOR_DEVICE_ATTR(temp1_input, 0444, | 
 | 			  be_hwmon_show_temp, NULL, 1); | 
 |  | 
 | static struct attribute *be_hwmon_attrs[] = { | 
 | 	&sensor_dev_attr_temp1_input.dev_attr.attr, | 
 | 	NULL | 
 | }; | 
 |  | 
 | ATTRIBUTE_GROUPS(be_hwmon); | 
 |  | 
 | static char *mc_name(struct be_adapter *adapter) | 
 | { | 
 | 	char *str = "";	/* default */ | 
 |  | 
 | 	switch (adapter->mc_type) { | 
 | 	case UMC: | 
 | 		str = "UMC"; | 
 | 		break; | 
 | 	case FLEX10: | 
 | 		str = "FLEX10"; | 
 | 		break; | 
 | 	case vNIC1: | 
 | 		str = "vNIC-1"; | 
 | 		break; | 
 | 	case nPAR: | 
 | 		str = "nPAR"; | 
 | 		break; | 
 | 	case UFP: | 
 | 		str = "UFP"; | 
 | 		break; | 
 | 	case vNIC2: | 
 | 		str = "vNIC-2"; | 
 | 		break; | 
 | 	default: | 
 | 		str = ""; | 
 | 	} | 
 |  | 
 | 	return str; | 
 | } | 
 |  | 
 | static inline char *func_name(struct be_adapter *adapter) | 
 | { | 
 | 	return be_physfn(adapter) ? "PF" : "VF"; | 
 | } | 
 |  | 
 | static inline char *nic_name(struct pci_dev *pdev) | 
 | { | 
 | 	switch (pdev->device) { | 
 | 	case OC_DEVICE_ID1: | 
 | 		return OC_NAME; | 
 | 	case OC_DEVICE_ID2: | 
 | 		return OC_NAME_BE; | 
 | 	case OC_DEVICE_ID3: | 
 | 	case OC_DEVICE_ID4: | 
 | 		return OC_NAME_LANCER; | 
 | 	case BE_DEVICE_ID2: | 
 | 		return BE3_NAME; | 
 | 	case OC_DEVICE_ID5: | 
 | 	case OC_DEVICE_ID6: | 
 | 		return OC_NAME_SH; | 
 | 	default: | 
 | 		return BE_NAME; | 
 | 	} | 
 | } | 
 |  | 
 | static int be_probe(struct pci_dev *pdev, const struct pci_device_id *pdev_id) | 
 | { | 
 | 	struct be_adapter *adapter; | 
 | 	struct net_device *netdev; | 
 | 	int status = 0; | 
 |  | 
 | 	dev_info(&pdev->dev, "%s version is %s\n", DRV_NAME, DRV_VER); | 
 |  | 
 | 	status = pci_enable_device(pdev); | 
 | 	if (status) | 
 | 		goto do_none; | 
 |  | 
 | 	status = pci_request_regions(pdev, DRV_NAME); | 
 | 	if (status) | 
 | 		goto disable_dev; | 
 | 	pci_set_master(pdev); | 
 |  | 
 | 	netdev = alloc_etherdev_mqs(sizeof(*adapter), MAX_TX_QS, MAX_RX_QS); | 
 | 	if (!netdev) { | 
 | 		status = -ENOMEM; | 
 | 		goto rel_reg; | 
 | 	} | 
 | 	adapter = netdev_priv(netdev); | 
 | 	adapter->pdev = pdev; | 
 | 	pci_set_drvdata(pdev, adapter); | 
 | 	adapter->netdev = netdev; | 
 | 	SET_NETDEV_DEV(netdev, &pdev->dev); | 
 |  | 
 | 	status = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64)); | 
 | 	if (!status) { | 
 | 		netdev->features |= NETIF_F_HIGHDMA; | 
 | 	} else { | 
 | 		status = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)); | 
 | 		if (status) { | 
 | 			dev_err(&pdev->dev, "Could not set PCI DMA Mask\n"); | 
 | 			goto free_netdev; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	status = pci_enable_pcie_error_reporting(pdev); | 
 | 	if (!status) | 
 | 		dev_info(&pdev->dev, "PCIe error reporting enabled\n"); | 
 |  | 
 | 	status = be_map_pci_bars(adapter); | 
 | 	if (status) | 
 | 		goto free_netdev; | 
 |  | 
 | 	status = be_drv_init(adapter); | 
 | 	if (status) | 
 | 		goto unmap_bars; | 
 |  | 
 | 	status = be_setup(adapter); | 
 | 	if (status) | 
 | 		goto drv_cleanup; | 
 |  | 
 | 	be_netdev_init(netdev); | 
 | 	status = register_netdev(netdev); | 
 | 	if (status != 0) | 
 | 		goto unsetup; | 
 |  | 
 | 	be_roce_dev_add(adapter); | 
 |  | 
 | 	be_schedule_err_detection(adapter, ERR_DETECTION_DELAY); | 
 | 	adapter->error_recovery.probe_time = jiffies; | 
 |  | 
 | 	/* On Die temperature not supported for VF. */ | 
 | 	if (be_physfn(adapter) && IS_ENABLED(CONFIG_BE2NET_HWMON)) { | 
 | 		adapter->hwmon_info.hwmon_dev = | 
 | 			devm_hwmon_device_register_with_groups(&pdev->dev, | 
 | 							       DRV_NAME, | 
 | 							       adapter, | 
 | 							       be_hwmon_groups); | 
 | 		adapter->hwmon_info.be_on_die_temp = BE_INVALID_DIE_TEMP; | 
 | 	} | 
 |  | 
 | 	dev_info(&pdev->dev, "%s: %s %s port %c\n", nic_name(pdev), | 
 | 		 func_name(adapter), mc_name(adapter), adapter->port_name); | 
 |  | 
 | 	return 0; | 
 |  | 
 | unsetup: | 
 | 	be_clear(adapter); | 
 | drv_cleanup: | 
 | 	be_drv_cleanup(adapter); | 
 | unmap_bars: | 
 | 	be_unmap_pci_bars(adapter); | 
 | free_netdev: | 
 | 	free_netdev(netdev); | 
 | rel_reg: | 
 | 	pci_release_regions(pdev); | 
 | disable_dev: | 
 | 	pci_disable_device(pdev); | 
 | do_none: | 
 | 	dev_err(&pdev->dev, "%s initialization failed\n", nic_name(pdev)); | 
 | 	return status; | 
 | } | 
 |  | 
 | static int be_suspend(struct pci_dev *pdev, pm_message_t state) | 
 | { | 
 | 	struct be_adapter *adapter = pci_get_drvdata(pdev); | 
 |  | 
 | 	be_intr_set(adapter, false); | 
 | 	be_cancel_err_detection(adapter); | 
 |  | 
 | 	be_cleanup(adapter); | 
 |  | 
 | 	pci_save_state(pdev); | 
 | 	pci_disable_device(pdev); | 
 | 	pci_set_power_state(pdev, pci_choose_state(pdev, state)); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int be_pci_resume(struct pci_dev *pdev) | 
 | { | 
 | 	struct be_adapter *adapter = pci_get_drvdata(pdev); | 
 | 	int status = 0; | 
 |  | 
 | 	status = pci_enable_device(pdev); | 
 | 	if (status) | 
 | 		return status; | 
 |  | 
 | 	pci_restore_state(pdev); | 
 |  | 
 | 	status = be_resume(adapter); | 
 | 	if (status) | 
 | 		return status; | 
 |  | 
 | 	be_schedule_err_detection(adapter, ERR_DETECTION_DELAY); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * An FLR will stop BE from DMAing any data. | 
 |  */ | 
 | static void be_shutdown(struct pci_dev *pdev) | 
 | { | 
 | 	struct be_adapter *adapter = pci_get_drvdata(pdev); | 
 |  | 
 | 	if (!adapter) | 
 | 		return; | 
 |  | 
 | 	be_roce_dev_shutdown(adapter); | 
 | 	cancel_delayed_work_sync(&adapter->work); | 
 | 	be_cancel_err_detection(adapter); | 
 |  | 
 | 	netif_device_detach(adapter->netdev); | 
 |  | 
 | 	be_cmd_reset_function(adapter); | 
 |  | 
 | 	pci_disable_device(pdev); | 
 | } | 
 |  | 
 | static pci_ers_result_t be_eeh_err_detected(struct pci_dev *pdev, | 
 | 					    pci_channel_state_t state) | 
 | { | 
 | 	struct be_adapter *adapter = pci_get_drvdata(pdev); | 
 |  | 
 | 	dev_err(&adapter->pdev->dev, "EEH error detected\n"); | 
 |  | 
 | 	be_roce_dev_remove(adapter); | 
 |  | 
 | 	if (!be_check_error(adapter, BE_ERROR_EEH)) { | 
 | 		be_set_error(adapter, BE_ERROR_EEH); | 
 |  | 
 | 		be_cancel_err_detection(adapter); | 
 |  | 
 | 		be_cleanup(adapter); | 
 | 	} | 
 |  | 
 | 	if (state == pci_channel_io_perm_failure) | 
 | 		return PCI_ERS_RESULT_DISCONNECT; | 
 |  | 
 | 	pci_disable_device(pdev); | 
 |  | 
 | 	/* The error could cause the FW to trigger a flash debug dump. | 
 | 	 * Resetting the card while flash dump is in progress | 
 | 	 * can cause it not to recover; wait for it to finish. | 
 | 	 * Wait only for first function as it is needed only once per | 
 | 	 * adapter. | 
 | 	 */ | 
 | 	if (pdev->devfn == 0) | 
 | 		ssleep(30); | 
 |  | 
 | 	return PCI_ERS_RESULT_NEED_RESET; | 
 | } | 
 |  | 
 | static pci_ers_result_t be_eeh_reset(struct pci_dev *pdev) | 
 | { | 
 | 	struct be_adapter *adapter = pci_get_drvdata(pdev); | 
 | 	int status; | 
 |  | 
 | 	dev_info(&adapter->pdev->dev, "EEH reset\n"); | 
 |  | 
 | 	status = pci_enable_device(pdev); | 
 | 	if (status) | 
 | 		return PCI_ERS_RESULT_DISCONNECT; | 
 |  | 
 | 	pci_set_master(pdev); | 
 | 	pci_restore_state(pdev); | 
 |  | 
 | 	/* Check if card is ok and fw is ready */ | 
 | 	dev_info(&adapter->pdev->dev, | 
 | 		 "Waiting for FW to be ready after EEH reset\n"); | 
 | 	status = be_fw_wait_ready(adapter); | 
 | 	if (status) | 
 | 		return PCI_ERS_RESULT_DISCONNECT; | 
 |  | 
 | 	pci_cleanup_aer_uncorrect_error_status(pdev); | 
 | 	be_clear_error(adapter, BE_CLEAR_ALL); | 
 | 	return PCI_ERS_RESULT_RECOVERED; | 
 | } | 
 |  | 
 | static void be_eeh_resume(struct pci_dev *pdev) | 
 | { | 
 | 	int status = 0; | 
 | 	struct be_adapter *adapter = pci_get_drvdata(pdev); | 
 |  | 
 | 	dev_info(&adapter->pdev->dev, "EEH resume\n"); | 
 |  | 
 | 	pci_save_state(pdev); | 
 |  | 
 | 	status = be_resume(adapter); | 
 | 	if (status) | 
 | 		goto err; | 
 |  | 
 | 	be_roce_dev_add(adapter); | 
 |  | 
 | 	be_schedule_err_detection(adapter, ERR_DETECTION_DELAY); | 
 | 	return; | 
 | err: | 
 | 	dev_err(&adapter->pdev->dev, "EEH resume failed\n"); | 
 | } | 
 |  | 
 | static int be_pci_sriov_configure(struct pci_dev *pdev, int num_vfs) | 
 | { | 
 | 	struct be_adapter *adapter = pci_get_drvdata(pdev); | 
 | 	struct be_resources vft_res = {0}; | 
 | 	int status; | 
 |  | 
 | 	if (!num_vfs) | 
 | 		be_vf_clear(adapter); | 
 |  | 
 | 	adapter->num_vfs = num_vfs; | 
 |  | 
 | 	if (adapter->num_vfs == 0 && pci_vfs_assigned(pdev)) { | 
 | 		dev_warn(&pdev->dev, | 
 | 			 "Cannot disable VFs while they are assigned\n"); | 
 | 		return -EBUSY; | 
 | 	} | 
 |  | 
 | 	/* When the HW is in SRIOV capable configuration, the PF-pool resources | 
 | 	 * are equally distributed across the max-number of VFs. The user may | 
 | 	 * request only a subset of the max-vfs to be enabled. | 
 | 	 * Based on num_vfs, redistribute the resources across num_vfs so that | 
 | 	 * each VF will have access to more number of resources. | 
 | 	 * This facility is not available in BE3 FW. | 
 | 	 * Also, this is done by FW in Lancer chip. | 
 | 	 */ | 
 | 	if (skyhawk_chip(adapter) && !pci_num_vf(pdev)) { | 
 | 		be_calculate_vf_res(adapter, adapter->num_vfs, | 
 | 				    &vft_res); | 
 | 		status = be_cmd_set_sriov_config(adapter, adapter->pool_res, | 
 | 						 adapter->num_vfs, &vft_res); | 
 | 		if (status) | 
 | 			dev_err(&pdev->dev, | 
 | 				"Failed to optimize SR-IOV resources\n"); | 
 | 	} | 
 |  | 
 | 	status = be_get_resources(adapter); | 
 | 	if (status) | 
 | 		return be_cmd_status(status); | 
 |  | 
 | 	/* Updating real_num_tx/rx_queues() requires rtnl_lock() */ | 
 | 	rtnl_lock(); | 
 | 	status = be_update_queues(adapter); | 
 | 	rtnl_unlock(); | 
 | 	if (status) | 
 | 		return be_cmd_status(status); | 
 |  | 
 | 	if (adapter->num_vfs) | 
 | 		status = be_vf_setup(adapter); | 
 |  | 
 | 	if (!status) | 
 | 		return adapter->num_vfs; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static const struct pci_error_handlers be_eeh_handlers = { | 
 | 	.error_detected = be_eeh_err_detected, | 
 | 	.slot_reset = be_eeh_reset, | 
 | 	.resume = be_eeh_resume, | 
 | }; | 
 |  | 
 | static struct pci_driver be_driver = { | 
 | 	.name = DRV_NAME, | 
 | 	.id_table = be_dev_ids, | 
 | 	.probe = be_probe, | 
 | 	.remove = be_remove, | 
 | 	.suspend = be_suspend, | 
 | 	.resume = be_pci_resume, | 
 | 	.shutdown = be_shutdown, | 
 | 	.sriov_configure = be_pci_sriov_configure, | 
 | 	.err_handler = &be_eeh_handlers | 
 | }; | 
 |  | 
 | static int __init be_init_module(void) | 
 | { | 
 | 	int status; | 
 |  | 
 | 	if (rx_frag_size != 8192 && rx_frag_size != 4096 && | 
 | 	    rx_frag_size != 2048) { | 
 | 		printk(KERN_WARNING DRV_NAME | 
 | 			" : Module param rx_frag_size must be 2048/4096/8192." | 
 | 			" Using 2048\n"); | 
 | 		rx_frag_size = 2048; | 
 | 	} | 
 |  | 
 | 	if (num_vfs > 0) { | 
 | 		pr_info(DRV_NAME " : Module param num_vfs is obsolete."); | 
 | 		pr_info(DRV_NAME " : Use sysfs method to enable VFs\n"); | 
 | 	} | 
 |  | 
 | 	be_wq = create_singlethread_workqueue("be_wq"); | 
 | 	if (!be_wq) { | 
 | 		pr_warn(DRV_NAME "workqueue creation failed\n"); | 
 | 		return -1; | 
 | 	} | 
 |  | 
 | 	be_err_recovery_workq = | 
 | 		create_singlethread_workqueue("be_err_recover"); | 
 | 	if (!be_err_recovery_workq) | 
 | 		pr_warn(DRV_NAME "Could not create error recovery workqueue\n"); | 
 |  | 
 | 	status = pci_register_driver(&be_driver); | 
 | 	if (status) { | 
 | 		destroy_workqueue(be_wq); | 
 | 		be_destroy_err_recovery_workq(); | 
 | 	} | 
 | 	return status; | 
 | } | 
 | module_init(be_init_module); | 
 |  | 
 | static void __exit be_exit_module(void) | 
 | { | 
 | 	pci_unregister_driver(&be_driver); | 
 |  | 
 | 	be_destroy_err_recovery_workq(); | 
 |  | 
 | 	if (be_wq) | 
 | 		destroy_workqueue(be_wq); | 
 | } | 
 | module_exit(be_exit_module); |