| /* | 
 |  *  PowerPC version | 
 |  *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) | 
 |  * | 
 |  *  Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au) | 
 |  *  and Cort Dougan (PReP) (cort@cs.nmt.edu) | 
 |  *    Copyright (C) 1996 Paul Mackerras | 
 |  *  PPC44x/36-bit changes by Matt Porter (mporter@mvista.com) | 
 |  * | 
 |  *  Derived from "arch/i386/mm/init.c" | 
 |  *    Copyright (C) 1991, 1992, 1993, 1994  Linus Torvalds | 
 |  * | 
 |  *  This program is free software; you can redistribute it and/or | 
 |  *  modify it under the terms of the GNU General Public License | 
 |  *  as published by the Free Software Foundation; either version | 
 |  *  2 of the License, or (at your option) any later version. | 
 |  * | 
 |  */ | 
 |  | 
 | #include <linux/module.h> | 
 | #include <linux/sched.h> | 
 | #include <linux/kernel.h> | 
 | #include <linux/errno.h> | 
 | #include <linux/string.h> | 
 | #include <linux/types.h> | 
 | #include <linux/mm.h> | 
 | #include <linux/stddef.h> | 
 | #include <linux/init.h> | 
 | #include <linux/bootmem.h> | 
 | #include <linux/highmem.h> | 
 | #include <linux/initrd.h> | 
 | #include <linux/pagemap.h> | 
 | #include <linux/memblock.h> | 
 | #include <linux/gfp.h> | 
 |  | 
 | #include <asm/pgalloc.h> | 
 | #include <asm/prom.h> | 
 | #include <asm/io.h> | 
 | #include <asm/pgtable.h> | 
 | #include <asm/mmu.h> | 
 | #include <asm/smp.h> | 
 | #include <asm/machdep.h> | 
 | #include <asm/btext.h> | 
 | #include <asm/tlb.h> | 
 | #include <asm/sections.h> | 
 | #include <asm/system.h> | 
 |  | 
 | #include "mmu_decl.h" | 
 |  | 
 | #if defined(CONFIG_KERNEL_START_BOOL) || defined(CONFIG_LOWMEM_SIZE_BOOL) | 
 | /* The amount of lowmem must be within 0xF0000000 - KERNELBASE. */ | 
 | #if (CONFIG_LOWMEM_SIZE > (0xF0000000 - PAGE_OFFSET)) | 
 | #error "You must adjust CONFIG_LOWMEM_SIZE or CONFIG_START_KERNEL" | 
 | #endif | 
 | #endif | 
 | #define MAX_LOW_MEM	CONFIG_LOWMEM_SIZE | 
 |  | 
 | phys_addr_t total_memory; | 
 | phys_addr_t total_lowmem; | 
 |  | 
 | phys_addr_t memstart_addr = (phys_addr_t)~0ull; | 
 | EXPORT_SYMBOL(memstart_addr); | 
 | phys_addr_t kernstart_addr; | 
 | EXPORT_SYMBOL(kernstart_addr); | 
 | phys_addr_t lowmem_end_addr; | 
 |  | 
 | int boot_mapsize; | 
 | #ifdef CONFIG_PPC_PMAC | 
 | unsigned long agp_special_page; | 
 | EXPORT_SYMBOL(agp_special_page); | 
 | #endif | 
 |  | 
 | void MMU_init(void); | 
 |  | 
 | /* XXX should be in current.h  -- paulus */ | 
 | extern struct task_struct *current_set[NR_CPUS]; | 
 |  | 
 | /* | 
 |  * this tells the system to map all of ram with the segregs | 
 |  * (i.e. page tables) instead of the bats. | 
 |  * -- Cort | 
 |  */ | 
 | int __map_without_bats; | 
 | int __map_without_ltlbs; | 
 |  | 
 | /* | 
 |  * This tells the system to allow ioremapping memory marked as reserved. | 
 |  */ | 
 | int __allow_ioremap_reserved; | 
 |  | 
 | /* max amount of low RAM to map in */ | 
 | unsigned long __max_low_memory = MAX_LOW_MEM; | 
 |  | 
 | /* | 
 |  * address of the limit of what is accessible with initial MMU setup - | 
 |  * 256MB usually, but only 16MB on 601. | 
 |  */ | 
 | phys_addr_t __initial_memory_limit_addr = (phys_addr_t)0x10000000; | 
 |  | 
 | /* | 
 |  * Check for command-line options that affect what MMU_init will do. | 
 |  */ | 
 | void MMU_setup(void) | 
 | { | 
 | 	/* Check for nobats option (used in mapin_ram). */ | 
 | 	if (strstr(cmd_line, "nobats")) { | 
 | 		__map_without_bats = 1; | 
 | 	} | 
 |  | 
 | 	if (strstr(cmd_line, "noltlbs")) { | 
 | 		__map_without_ltlbs = 1; | 
 | 	} | 
 | #ifdef CONFIG_DEBUG_PAGEALLOC | 
 | 	__map_without_bats = 1; | 
 | 	__map_without_ltlbs = 1; | 
 | #endif | 
 | } | 
 |  | 
 | /* | 
 |  * MMU_init sets up the basic memory mappings for the kernel, | 
 |  * including both RAM and possibly some I/O regions, | 
 |  * and sets up the page tables and the MMU hardware ready to go. | 
 |  */ | 
 | void __init MMU_init(void) | 
 | { | 
 | 	if (ppc_md.progress) | 
 | 		ppc_md.progress("MMU:enter", 0x111); | 
 |  | 
 | 	/* 601 can only access 16MB at the moment */ | 
 | 	if (PVR_VER(mfspr(SPRN_PVR)) == 1) | 
 | 		__initial_memory_limit_addr = 0x01000000; | 
 | 	/* 8xx can only access 8MB at the moment */ | 
 | 	if (PVR_VER(mfspr(SPRN_PVR)) == 0x50) | 
 | 		__initial_memory_limit_addr = 0x00800000; | 
 |  | 
 | 	/* parse args from command line */ | 
 | 	MMU_setup(); | 
 |  | 
 | 	if (memblock.memory.cnt > 1) { | 
 | #ifndef CONFIG_WII | 
 | 		memblock.memory.cnt = 1; | 
 | 		memblock_analyze(); | 
 | 		printk(KERN_WARNING "Only using first contiguous memory region"); | 
 | #else | 
 | 		wii_memory_fixups(); | 
 | #endif | 
 | 	} | 
 |  | 
 | 	total_lowmem = total_memory = memblock_end_of_DRAM() - memstart_addr; | 
 | 	lowmem_end_addr = memstart_addr + total_lowmem; | 
 |  | 
 | #ifdef CONFIG_FSL_BOOKE | 
 | 	/* Freescale Book-E parts expect lowmem to be mapped by fixed TLB | 
 | 	 * entries, so we need to adjust lowmem to match the amount we can map | 
 | 	 * in the fixed entries */ | 
 | 	adjust_total_lowmem(); | 
 | #endif /* CONFIG_FSL_BOOKE */ | 
 |  | 
 | 	if (total_lowmem > __max_low_memory) { | 
 | 		total_lowmem = __max_low_memory; | 
 | 		lowmem_end_addr = memstart_addr + total_lowmem; | 
 | #ifndef CONFIG_HIGHMEM | 
 | 		total_memory = total_lowmem; | 
 | 		memblock_enforce_memory_limit(lowmem_end_addr); | 
 | 		memblock_analyze(); | 
 | #endif /* CONFIG_HIGHMEM */ | 
 | 	} | 
 |  | 
 | 	/* Initialize the MMU hardware */ | 
 | 	if (ppc_md.progress) | 
 | 		ppc_md.progress("MMU:hw init", 0x300); | 
 | 	MMU_init_hw(); | 
 |  | 
 | 	/* Map in all of RAM starting at KERNELBASE */ | 
 | 	if (ppc_md.progress) | 
 | 		ppc_md.progress("MMU:mapin", 0x301); | 
 | 	mapin_ram(); | 
 |  | 
 | 	/* Initialize early top-down ioremap allocator */ | 
 | 	ioremap_bot = IOREMAP_TOP; | 
 |  | 
 | 	/* Map in I/O resources */ | 
 | 	if (ppc_md.progress) | 
 | 		ppc_md.progress("MMU:setio", 0x302); | 
 |  | 
 | 	if (ppc_md.progress) | 
 | 		ppc_md.progress("MMU:exit", 0x211); | 
 |  | 
 | 	/* From now on, btext is no longer BAT mapped if it was at all */ | 
 | #ifdef CONFIG_BOOTX_TEXT | 
 | 	btext_unmap(); | 
 | #endif | 
 | } | 
 |  | 
 | /* This is only called until mem_init is done. */ | 
 | void __init *early_get_page(void) | 
 | { | 
 | 	void *p; | 
 |  | 
 | 	if (init_bootmem_done) { | 
 | 		p = alloc_bootmem_pages(PAGE_SIZE); | 
 | 	} else { | 
 | 		p = __va(memblock_alloc_base(PAGE_SIZE, PAGE_SIZE, | 
 | 					__initial_memory_limit_addr)); | 
 | 	} | 
 | 	return p; | 
 | } | 
 |  | 
 | /* Free up now-unused memory */ | 
 | static void free_sec(unsigned long start, unsigned long end, const char *name) | 
 | { | 
 | 	unsigned long cnt = 0; | 
 |  | 
 | 	while (start < end) { | 
 | 		ClearPageReserved(virt_to_page(start)); | 
 | 		init_page_count(virt_to_page(start)); | 
 | 		free_page(start); | 
 | 		cnt++; | 
 | 		start += PAGE_SIZE; | 
 |  	} | 
 | 	if (cnt) { | 
 | 		printk(" %ldk %s", cnt << (PAGE_SHIFT - 10), name); | 
 | 		totalram_pages += cnt; | 
 | 	} | 
 | } | 
 |  | 
 | void free_initmem(void) | 
 | { | 
 | #define FREESEC(TYPE) \ | 
 | 	free_sec((unsigned long)(&__ ## TYPE ## _begin), \ | 
 | 		 (unsigned long)(&__ ## TYPE ## _end), \ | 
 | 		 #TYPE); | 
 |  | 
 | 	printk ("Freeing unused kernel memory:"); | 
 | 	FREESEC(init); | 
 |  	printk("\n"); | 
 | 	ppc_md.progress = NULL; | 
 | #undef FREESEC | 
 | } | 
 |  | 
 | #ifdef CONFIG_BLK_DEV_INITRD | 
 | void free_initrd_mem(unsigned long start, unsigned long end) | 
 | { | 
 | 	if (start < end) | 
 | 		printk ("Freeing initrd memory: %ldk freed\n", (end - start) >> 10); | 
 | 	for (; start < end; start += PAGE_SIZE) { | 
 | 		ClearPageReserved(virt_to_page(start)); | 
 | 		init_page_count(virt_to_page(start)); | 
 | 		free_page(start); | 
 | 		totalram_pages++; | 
 | 	} | 
 | } | 
 | #endif | 
 |  |