| /* | 
 |   USB Driver layer for GSM modems | 
 |  | 
 |   Copyright (C) 2005  Matthias Urlichs <smurf@smurf.noris.de> | 
 |  | 
 |   This driver is free software; you can redistribute it and/or modify | 
 |   it under the terms of Version 2 of the GNU General Public License as | 
 |   published by the Free Software Foundation. | 
 |  | 
 |   Portions copied from the Keyspan driver by Hugh Blemings <hugh@blemings.org> | 
 |  | 
 |   History: see the git log. | 
 |  | 
 |   Work sponsored by: Sigos GmbH, Germany <info@sigos.de> | 
 |  | 
 |   This driver exists because the "normal" serial driver doesn't work too well | 
 |   with GSM modems. Issues: | 
 |   - data loss -- one single Receive URB is not nearly enough | 
 |   - controlling the baud rate doesn't make sense | 
 | */ | 
 |  | 
 | #define DRIVER_AUTHOR "Matthias Urlichs <smurf@smurf.noris.de>" | 
 | #define DRIVER_DESC "USB Driver for GSM modems" | 
 |  | 
 | #include <linux/kernel.h> | 
 | #include <linux/jiffies.h> | 
 | #include <linux/errno.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/tty.h> | 
 | #include <linux/tty_flip.h> | 
 | #include <linux/module.h> | 
 | #include <linux/bitops.h> | 
 | #include <linux/uaccess.h> | 
 | #include <linux/usb.h> | 
 | #include <linux/usb/serial.h> | 
 | #include <linux/serial.h> | 
 | #include "usb-wwan.h" | 
 |  | 
 | void usb_wwan_dtr_rts(struct usb_serial_port *port, int on) | 
 | { | 
 | 	struct usb_wwan_port_private *portdata; | 
 | 	struct usb_wwan_intf_private *intfdata; | 
 |  | 
 | 	intfdata = port->serial->private; | 
 |  | 
 | 	if (!intfdata->send_setup) | 
 | 		return; | 
 |  | 
 | 	portdata = usb_get_serial_port_data(port); | 
 | 	/* FIXME: locking */ | 
 | 	portdata->rts_state = on; | 
 | 	portdata->dtr_state = on; | 
 |  | 
 | 	intfdata->send_setup(port); | 
 | } | 
 | EXPORT_SYMBOL(usb_wwan_dtr_rts); | 
 |  | 
 | void usb_wwan_set_termios(struct tty_struct *tty, | 
 | 			  struct usb_serial_port *port, | 
 | 			  struct ktermios *old_termios) | 
 | { | 
 | 	struct usb_wwan_intf_private *intfdata = port->serial->private; | 
 |  | 
 | 	/* Doesn't support option setting */ | 
 | 	tty_termios_copy_hw(&tty->termios, old_termios); | 
 |  | 
 | 	if (intfdata->send_setup) | 
 | 		intfdata->send_setup(port); | 
 | } | 
 | EXPORT_SYMBOL(usb_wwan_set_termios); | 
 |  | 
 | int usb_wwan_tiocmget(struct tty_struct *tty) | 
 | { | 
 | 	struct usb_serial_port *port = tty->driver_data; | 
 | 	unsigned int value; | 
 | 	struct usb_wwan_port_private *portdata; | 
 |  | 
 | 	portdata = usb_get_serial_port_data(port); | 
 |  | 
 | 	value = ((portdata->rts_state) ? TIOCM_RTS : 0) | | 
 | 	    ((portdata->dtr_state) ? TIOCM_DTR : 0) | | 
 | 	    ((portdata->cts_state) ? TIOCM_CTS : 0) | | 
 | 	    ((portdata->dsr_state) ? TIOCM_DSR : 0) | | 
 | 	    ((portdata->dcd_state) ? TIOCM_CAR : 0) | | 
 | 	    ((portdata->ri_state) ? TIOCM_RNG : 0); | 
 |  | 
 | 	return value; | 
 | } | 
 | EXPORT_SYMBOL(usb_wwan_tiocmget); | 
 |  | 
 | int usb_wwan_tiocmset(struct tty_struct *tty, | 
 | 		      unsigned int set, unsigned int clear) | 
 | { | 
 | 	struct usb_serial_port *port = tty->driver_data; | 
 | 	struct usb_wwan_port_private *portdata; | 
 | 	struct usb_wwan_intf_private *intfdata; | 
 |  | 
 | 	portdata = usb_get_serial_port_data(port); | 
 | 	intfdata = port->serial->private; | 
 |  | 
 | 	if (!intfdata->send_setup) | 
 | 		return -EINVAL; | 
 |  | 
 | 	/* FIXME: what locks portdata fields ? */ | 
 | 	if (set & TIOCM_RTS) | 
 | 		portdata->rts_state = 1; | 
 | 	if (set & TIOCM_DTR) | 
 | 		portdata->dtr_state = 1; | 
 |  | 
 | 	if (clear & TIOCM_RTS) | 
 | 		portdata->rts_state = 0; | 
 | 	if (clear & TIOCM_DTR) | 
 | 		portdata->dtr_state = 0; | 
 | 	return intfdata->send_setup(port); | 
 | } | 
 | EXPORT_SYMBOL(usb_wwan_tiocmset); | 
 |  | 
 | static int get_serial_info(struct usb_serial_port *port, | 
 | 			   struct serial_struct __user *retinfo) | 
 | { | 
 | 	struct serial_struct tmp; | 
 |  | 
 | 	if (!retinfo) | 
 | 		return -EFAULT; | 
 |  | 
 | 	memset(&tmp, 0, sizeof(tmp)); | 
 | 	tmp.line            = port->serial->minor; | 
 | 	tmp.port            = port->number; | 
 | 	tmp.baud_base       = tty_get_baud_rate(port->port.tty); | 
 | 	tmp.close_delay	    = port->port.close_delay / 10; | 
 | 	tmp.closing_wait    = port->port.closing_wait == ASYNC_CLOSING_WAIT_NONE ? | 
 | 				 ASYNC_CLOSING_WAIT_NONE : | 
 | 				 port->port.closing_wait / 10; | 
 |  | 
 | 	if (copy_to_user(retinfo, &tmp, sizeof(*retinfo))) | 
 | 		return -EFAULT; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int set_serial_info(struct usb_serial_port *port, | 
 | 			   struct serial_struct __user *newinfo) | 
 | { | 
 | 	struct serial_struct new_serial; | 
 | 	unsigned int closing_wait, close_delay; | 
 | 	int retval = 0; | 
 |  | 
 | 	if (copy_from_user(&new_serial, newinfo, sizeof(new_serial))) | 
 | 		return -EFAULT; | 
 |  | 
 | 	close_delay = new_serial.close_delay * 10; | 
 | 	closing_wait = new_serial.closing_wait == ASYNC_CLOSING_WAIT_NONE ? | 
 | 			ASYNC_CLOSING_WAIT_NONE : new_serial.closing_wait * 10; | 
 |  | 
 | 	mutex_lock(&port->port.mutex); | 
 |  | 
 | 	if (!capable(CAP_SYS_ADMIN)) { | 
 | 		if ((close_delay != port->port.close_delay) || | 
 | 		    (closing_wait != port->port.closing_wait)) | 
 | 			retval = -EPERM; | 
 | 		else | 
 | 			retval = -EOPNOTSUPP; | 
 | 	} else { | 
 | 		port->port.close_delay  = close_delay; | 
 | 		port->port.closing_wait = closing_wait; | 
 | 	} | 
 |  | 
 | 	mutex_unlock(&port->port.mutex); | 
 | 	return retval; | 
 | } | 
 |  | 
 | int usb_wwan_ioctl(struct tty_struct *tty, | 
 | 		   unsigned int cmd, unsigned long arg) | 
 | { | 
 | 	struct usb_serial_port *port = tty->driver_data; | 
 |  | 
 | 	dev_dbg(&port->dev, "%s cmd 0x%04x\n", __func__, cmd); | 
 |  | 
 | 	switch (cmd) { | 
 | 	case TIOCGSERIAL: | 
 | 		return get_serial_info(port, | 
 | 				       (struct serial_struct __user *) arg); | 
 | 	case TIOCSSERIAL: | 
 | 		return set_serial_info(port, | 
 | 				       (struct serial_struct __user *) arg); | 
 | 	default: | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	dev_dbg(&port->dev, "%s arg not supported\n", __func__); | 
 |  | 
 | 	return -ENOIOCTLCMD; | 
 | } | 
 | EXPORT_SYMBOL(usb_wwan_ioctl); | 
 |  | 
 | /* Write */ | 
 | int usb_wwan_write(struct tty_struct *tty, struct usb_serial_port *port, | 
 | 		   const unsigned char *buf, int count) | 
 | { | 
 | 	struct usb_wwan_port_private *portdata; | 
 | 	struct usb_wwan_intf_private *intfdata; | 
 | 	int i; | 
 | 	int left, todo; | 
 | 	struct urb *this_urb = NULL;	/* spurious */ | 
 | 	int err; | 
 | 	unsigned long flags; | 
 |  | 
 | 	portdata = usb_get_serial_port_data(port); | 
 | 	intfdata = port->serial->private; | 
 |  | 
 | 	dev_dbg(&port->dev, "%s: write (%d chars)\n", __func__, count); | 
 |  | 
 | 	i = 0; | 
 | 	left = count; | 
 | 	for (i = 0; left > 0 && i < N_OUT_URB; i++) { | 
 | 		todo = left; | 
 | 		if (todo > OUT_BUFLEN) | 
 | 			todo = OUT_BUFLEN; | 
 |  | 
 | 		this_urb = portdata->out_urbs[i]; | 
 | 		if (test_and_set_bit(i, &portdata->out_busy)) { | 
 | 			if (time_before(jiffies, | 
 | 					portdata->tx_start_time[i] + 10 * HZ)) | 
 | 				continue; | 
 | 			usb_unlink_urb(this_urb); | 
 | 			continue; | 
 | 		} | 
 | 		dev_dbg(&port->dev, "%s: endpoint %d buf %d\n", __func__, | 
 | 			usb_pipeendpoint(this_urb->pipe), i); | 
 |  | 
 | 		err = usb_autopm_get_interface_async(port->serial->interface); | 
 | 		if (err < 0) | 
 | 			break; | 
 |  | 
 | 		/* send the data */ | 
 | 		memcpy(this_urb->transfer_buffer, buf, todo); | 
 | 		this_urb->transfer_buffer_length = todo; | 
 |  | 
 | 		spin_lock_irqsave(&intfdata->susp_lock, flags); | 
 | 		if (intfdata->suspended) { | 
 | 			usb_anchor_urb(this_urb, &portdata->delayed); | 
 | 			spin_unlock_irqrestore(&intfdata->susp_lock, flags); | 
 | 		} else { | 
 | 			intfdata->in_flight++; | 
 | 			spin_unlock_irqrestore(&intfdata->susp_lock, flags); | 
 | 			err = usb_submit_urb(this_urb, GFP_ATOMIC); | 
 | 			if (err) { | 
 | 				dev_dbg(&port->dev, | 
 | 					"usb_submit_urb %p (write bulk) failed (%d)\n", | 
 | 					this_urb, err); | 
 | 				clear_bit(i, &portdata->out_busy); | 
 | 				spin_lock_irqsave(&intfdata->susp_lock, flags); | 
 | 				intfdata->in_flight--; | 
 | 				spin_unlock_irqrestore(&intfdata->susp_lock, | 
 | 						       flags); | 
 | 				usb_autopm_put_interface_async(port->serial->interface); | 
 | 				break; | 
 | 			} | 
 | 		} | 
 |  | 
 | 		portdata->tx_start_time[i] = jiffies; | 
 | 		buf += todo; | 
 | 		left -= todo; | 
 | 	} | 
 |  | 
 | 	count -= left; | 
 | 	dev_dbg(&port->dev, "%s: wrote (did %d)\n", __func__, count); | 
 | 	return count; | 
 | } | 
 | EXPORT_SYMBOL(usb_wwan_write); | 
 |  | 
 | static void usb_wwan_indat_callback(struct urb *urb) | 
 | { | 
 | 	int err; | 
 | 	int endpoint; | 
 | 	struct usb_serial_port *port; | 
 | 	struct device *dev; | 
 | 	unsigned char *data = urb->transfer_buffer; | 
 | 	int status = urb->status; | 
 |  | 
 | 	endpoint = usb_pipeendpoint(urb->pipe); | 
 | 	port = urb->context; | 
 | 	dev = &port->dev; | 
 |  | 
 | 	if (status) { | 
 | 		dev_dbg(dev, "%s: nonzero status: %d on endpoint %02x.\n", | 
 | 			__func__, status, endpoint); | 
 | 	} else { | 
 | 		if (urb->actual_length) { | 
 | 			tty_insert_flip_string(&port->port, data, | 
 | 					urb->actual_length); | 
 | 			tty_flip_buffer_push(&port->port); | 
 | 		} else | 
 | 			dev_dbg(dev, "%s: empty read urb received\n", __func__); | 
 |  | 
 | 		/* Resubmit urb so we continue receiving */ | 
 | 		err = usb_submit_urb(urb, GFP_ATOMIC); | 
 | 		if (err) { | 
 | 			if (err != -EPERM) { | 
 | 				dev_err(dev, "%s: resubmit read urb failed. (%d)\n", __func__, err); | 
 | 				/* busy also in error unless we are killed */ | 
 | 				usb_mark_last_busy(port->serial->dev); | 
 | 			} | 
 | 		} else { | 
 | 			usb_mark_last_busy(port->serial->dev); | 
 | 		} | 
 | 	} | 
 | } | 
 |  | 
 | static void usb_wwan_outdat_callback(struct urb *urb) | 
 | { | 
 | 	struct usb_serial_port *port; | 
 | 	struct usb_wwan_port_private *portdata; | 
 | 	struct usb_wwan_intf_private *intfdata; | 
 | 	int i; | 
 |  | 
 | 	port = urb->context; | 
 | 	intfdata = port->serial->private; | 
 |  | 
 | 	usb_serial_port_softint(port); | 
 | 	usb_autopm_put_interface_async(port->serial->interface); | 
 | 	portdata = usb_get_serial_port_data(port); | 
 | 	spin_lock(&intfdata->susp_lock); | 
 | 	intfdata->in_flight--; | 
 | 	spin_unlock(&intfdata->susp_lock); | 
 |  | 
 | 	for (i = 0; i < N_OUT_URB; ++i) { | 
 | 		if (portdata->out_urbs[i] == urb) { | 
 | 			smp_mb__before_clear_bit(); | 
 | 			clear_bit(i, &portdata->out_busy); | 
 | 			break; | 
 | 		} | 
 | 	} | 
 | } | 
 |  | 
 | int usb_wwan_write_room(struct tty_struct *tty) | 
 | { | 
 | 	struct usb_serial_port *port = tty->driver_data; | 
 | 	struct usb_wwan_port_private *portdata; | 
 | 	int i; | 
 | 	int data_len = 0; | 
 | 	struct urb *this_urb; | 
 |  | 
 | 	portdata = usb_get_serial_port_data(port); | 
 |  | 
 | 	for (i = 0; i < N_OUT_URB; i++) { | 
 | 		this_urb = portdata->out_urbs[i]; | 
 | 		if (this_urb && !test_bit(i, &portdata->out_busy)) | 
 | 			data_len += OUT_BUFLEN; | 
 | 	} | 
 |  | 
 | 	dev_dbg(&port->dev, "%s: %d\n", __func__, data_len); | 
 | 	return data_len; | 
 | } | 
 | EXPORT_SYMBOL(usb_wwan_write_room); | 
 |  | 
 | int usb_wwan_chars_in_buffer(struct tty_struct *tty) | 
 | { | 
 | 	struct usb_serial_port *port = tty->driver_data; | 
 | 	struct usb_wwan_port_private *portdata; | 
 | 	int i; | 
 | 	int data_len = 0; | 
 | 	struct urb *this_urb; | 
 |  | 
 | 	portdata = usb_get_serial_port_data(port); | 
 |  | 
 | 	for (i = 0; i < N_OUT_URB; i++) { | 
 | 		this_urb = portdata->out_urbs[i]; | 
 | 		/* FIXME: This locking is insufficient as this_urb may | 
 | 		   go unused during the test */ | 
 | 		if (this_urb && test_bit(i, &portdata->out_busy)) | 
 | 			data_len += this_urb->transfer_buffer_length; | 
 | 	} | 
 | 	dev_dbg(&port->dev, "%s: %d\n", __func__, data_len); | 
 | 	return data_len; | 
 | } | 
 | EXPORT_SYMBOL(usb_wwan_chars_in_buffer); | 
 |  | 
 | int usb_wwan_open(struct tty_struct *tty, struct usb_serial_port *port) | 
 | { | 
 | 	struct usb_wwan_port_private *portdata; | 
 | 	struct usb_wwan_intf_private *intfdata; | 
 | 	struct usb_serial *serial = port->serial; | 
 | 	int i, err; | 
 | 	struct urb *urb; | 
 |  | 
 | 	portdata = usb_get_serial_port_data(port); | 
 | 	intfdata = serial->private; | 
 |  | 
 | 	/* Start reading from the IN endpoint */ | 
 | 	for (i = 0; i < N_IN_URB; i++) { | 
 | 		urb = portdata->in_urbs[i]; | 
 | 		if (!urb) | 
 | 			continue; | 
 | 		err = usb_submit_urb(urb, GFP_KERNEL); | 
 | 		if (err) { | 
 | 			dev_dbg(&port->dev, "%s: submit urb %d failed (%d) %d\n", | 
 | 				__func__, i, err, urb->transfer_buffer_length); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (intfdata->send_setup) | 
 | 		intfdata->send_setup(port); | 
 |  | 
 | 	serial->interface->needs_remote_wakeup = 1; | 
 | 	spin_lock_irq(&intfdata->susp_lock); | 
 | 	portdata->opened = 1; | 
 | 	spin_unlock_irq(&intfdata->susp_lock); | 
 | 	/* this balances a get in the generic USB serial code */ | 
 | 	usb_autopm_put_interface(serial->interface); | 
 |  | 
 | 	return 0; | 
 | } | 
 | EXPORT_SYMBOL(usb_wwan_open); | 
 |  | 
 | void usb_wwan_close(struct usb_serial_port *port) | 
 | { | 
 | 	int i; | 
 | 	struct usb_serial *serial = port->serial; | 
 | 	struct usb_wwan_port_private *portdata; | 
 | 	struct usb_wwan_intf_private *intfdata = port->serial->private; | 
 |  | 
 | 	portdata = usb_get_serial_port_data(port); | 
 |  | 
 | 	/* Stop reading/writing urbs */ | 
 | 	spin_lock_irq(&intfdata->susp_lock); | 
 | 	portdata->opened = 0; | 
 | 	spin_unlock_irq(&intfdata->susp_lock); | 
 |  | 
 | 	for (i = 0; i < N_IN_URB; i++) | 
 | 		usb_kill_urb(portdata->in_urbs[i]); | 
 | 	for (i = 0; i < N_OUT_URB; i++) | 
 | 		usb_kill_urb(portdata->out_urbs[i]); | 
 |  | 
 | 	/* balancing - important as an error cannot be handled*/ | 
 | 	usb_autopm_get_interface_no_resume(serial->interface); | 
 | 	serial->interface->needs_remote_wakeup = 0; | 
 | } | 
 | EXPORT_SYMBOL(usb_wwan_close); | 
 |  | 
 | /* Helper functions used by usb_wwan_setup_urbs */ | 
 | static struct urb *usb_wwan_setup_urb(struct usb_serial_port *port, | 
 | 				      int endpoint, | 
 | 				      int dir, void *ctx, char *buf, int len, | 
 | 				      void (*callback) (struct urb *)) | 
 | { | 
 | 	struct usb_serial *serial = port->serial; | 
 | 	struct urb *urb; | 
 |  | 
 | 	urb = usb_alloc_urb(0, GFP_KERNEL);	/* No ISO */ | 
 | 	if (urb == NULL) { | 
 | 		dev_dbg(&serial->interface->dev, | 
 | 			"%s: alloc for endpoint %d failed.\n", __func__, | 
 | 			endpoint); | 
 | 		return NULL; | 
 | 	} | 
 |  | 
 | 	/* Fill URB using supplied data. */ | 
 | 	usb_fill_bulk_urb(urb, serial->dev, | 
 | 			  usb_sndbulkpipe(serial->dev, endpoint) | dir, | 
 | 			  buf, len, callback, ctx); | 
 |  | 
 | 	return urb; | 
 | } | 
 |  | 
 | int usb_wwan_port_probe(struct usb_serial_port *port) | 
 | { | 
 | 	struct usb_wwan_port_private *portdata; | 
 | 	struct urb *urb; | 
 | 	u8 *buffer; | 
 | 	int err; | 
 | 	int i; | 
 |  | 
 | 	portdata = kzalloc(sizeof(*portdata), GFP_KERNEL); | 
 | 	if (!portdata) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	init_usb_anchor(&portdata->delayed); | 
 |  | 
 | 	for (i = 0; i < N_IN_URB; i++) { | 
 | 		if (!port->bulk_in_size) | 
 | 			break; | 
 |  | 
 | 		buffer = (u8 *)__get_free_page(GFP_KERNEL); | 
 | 		if (!buffer) | 
 | 			goto bail_out_error; | 
 | 		portdata->in_buffer[i] = buffer; | 
 |  | 
 | 		urb = usb_wwan_setup_urb(port, port->bulk_in_endpointAddress, | 
 | 						USB_DIR_IN, port, | 
 | 						buffer, IN_BUFLEN, | 
 | 						usb_wwan_indat_callback); | 
 | 		portdata->in_urbs[i] = urb; | 
 | 	} | 
 |  | 
 | 	for (i = 0; i < N_OUT_URB; i++) { | 
 | 		if (!port->bulk_out_size) | 
 | 			break; | 
 |  | 
 | 		buffer = kmalloc(OUT_BUFLEN, GFP_KERNEL); | 
 | 		if (!buffer) | 
 | 			goto bail_out_error2; | 
 | 		portdata->out_buffer[i] = buffer; | 
 |  | 
 | 		urb = usb_wwan_setup_urb(port, port->bulk_out_endpointAddress, | 
 | 						USB_DIR_OUT, port, | 
 | 						buffer, OUT_BUFLEN, | 
 | 						usb_wwan_outdat_callback); | 
 | 		portdata->out_urbs[i] = urb; | 
 | 	} | 
 |  | 
 | 	usb_set_serial_port_data(port, portdata); | 
 |  | 
 | 	if (port->interrupt_in_urb) { | 
 | 		err = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); | 
 | 		if (err) | 
 | 			dev_dbg(&port->dev, "%s: submit irq_in urb failed %d\n", | 
 | 				__func__, err); | 
 | 	} | 
 |  | 
 | 	return 0; | 
 |  | 
 | bail_out_error2: | 
 | 	for (i = 0; i < N_OUT_URB; i++) { | 
 | 		usb_free_urb(portdata->out_urbs[i]); | 
 | 		kfree(portdata->out_buffer[i]); | 
 | 	} | 
 | bail_out_error: | 
 | 	for (i = 0; i < N_IN_URB; i++) { | 
 | 		usb_free_urb(portdata->in_urbs[i]); | 
 | 		free_page((unsigned long)portdata->in_buffer[i]); | 
 | 	} | 
 | 	kfree(portdata); | 
 |  | 
 | 	return -ENOMEM; | 
 | } | 
 | EXPORT_SYMBOL_GPL(usb_wwan_port_probe); | 
 |  | 
 | int usb_wwan_port_remove(struct usb_serial_port *port) | 
 | { | 
 | 	int i; | 
 | 	struct usb_wwan_port_private *portdata; | 
 |  | 
 | 	portdata = usb_get_serial_port_data(port); | 
 | 	usb_set_serial_port_data(port, NULL); | 
 |  | 
 | 	/* Stop reading/writing urbs and free them */ | 
 | 	for (i = 0; i < N_IN_URB; i++) { | 
 | 		usb_kill_urb(portdata->in_urbs[i]); | 
 | 		usb_free_urb(portdata->in_urbs[i]); | 
 | 		free_page((unsigned long)portdata->in_buffer[i]); | 
 | 	} | 
 | 	for (i = 0; i < N_OUT_URB; i++) { | 
 | 		usb_kill_urb(portdata->out_urbs[i]); | 
 | 		usb_free_urb(portdata->out_urbs[i]); | 
 | 		kfree(portdata->out_buffer[i]); | 
 | 	} | 
 |  | 
 | 	/* Now free port private data */ | 
 | 	kfree(portdata); | 
 | 	return 0; | 
 | } | 
 | EXPORT_SYMBOL(usb_wwan_port_remove); | 
 |  | 
 | #ifdef CONFIG_PM | 
 | static void stop_read_write_urbs(struct usb_serial *serial) | 
 | { | 
 | 	int i, j; | 
 | 	struct usb_serial_port *port; | 
 | 	struct usb_wwan_port_private *portdata; | 
 |  | 
 | 	/* Stop reading/writing urbs */ | 
 | 	for (i = 0; i < serial->num_ports; ++i) { | 
 | 		port = serial->port[i]; | 
 | 		portdata = usb_get_serial_port_data(port); | 
 | 		if (!portdata) | 
 | 			continue; | 
 | 		for (j = 0; j < N_IN_URB; j++) | 
 | 			usb_kill_urb(portdata->in_urbs[j]); | 
 | 		for (j = 0; j < N_OUT_URB; j++) | 
 | 			usb_kill_urb(portdata->out_urbs[j]); | 
 | 	} | 
 | } | 
 |  | 
 | int usb_wwan_suspend(struct usb_serial *serial, pm_message_t message) | 
 | { | 
 | 	struct usb_wwan_intf_private *intfdata = serial->private; | 
 | 	int b; | 
 |  | 
 | 	if (PMSG_IS_AUTO(message)) { | 
 | 		spin_lock_irq(&intfdata->susp_lock); | 
 | 		b = intfdata->in_flight; | 
 | 		spin_unlock_irq(&intfdata->susp_lock); | 
 |  | 
 | 		if (b) | 
 | 			return -EBUSY; | 
 | 	} | 
 |  | 
 | 	spin_lock_irq(&intfdata->susp_lock); | 
 | 	intfdata->suspended = 1; | 
 | 	spin_unlock_irq(&intfdata->susp_lock); | 
 | 	stop_read_write_urbs(serial); | 
 |  | 
 | 	return 0; | 
 | } | 
 | EXPORT_SYMBOL(usb_wwan_suspend); | 
 |  | 
 | static void unbusy_queued_urb(struct urb *urb, struct usb_wwan_port_private *portdata) | 
 | { | 
 | 	int i; | 
 |  | 
 | 	for (i = 0; i < N_OUT_URB; i++) { | 
 | 		if (urb == portdata->out_urbs[i]) { | 
 | 			clear_bit(i, &portdata->out_busy); | 
 | 			break; | 
 | 		} | 
 | 	} | 
 | } | 
 |  | 
 | static void play_delayed(struct usb_serial_port *port) | 
 | { | 
 | 	struct usb_wwan_intf_private *data; | 
 | 	struct usb_wwan_port_private *portdata; | 
 | 	struct urb *urb; | 
 | 	int err; | 
 |  | 
 | 	portdata = usb_get_serial_port_data(port); | 
 | 	data = port->serial->private; | 
 | 	while ((urb = usb_get_from_anchor(&portdata->delayed))) { | 
 | 		err = usb_submit_urb(urb, GFP_ATOMIC); | 
 | 		if (!err) { | 
 | 			data->in_flight++; | 
 | 		} else { | 
 | 			/* we have to throw away the rest */ | 
 | 			do { | 
 | 				unbusy_queued_urb(urb, portdata); | 
 | 				usb_autopm_put_interface_no_suspend(port->serial->interface); | 
 | 			} while ((urb = usb_get_from_anchor(&portdata->delayed))); | 
 | 			break; | 
 | 		} | 
 | 	} | 
 | } | 
 |  | 
 | int usb_wwan_resume(struct usb_serial *serial) | 
 | { | 
 | 	int i, j; | 
 | 	struct usb_serial_port *port; | 
 | 	struct usb_wwan_intf_private *intfdata = serial->private; | 
 | 	struct usb_wwan_port_private *portdata; | 
 | 	struct urb *urb; | 
 | 	int err = 0; | 
 |  | 
 | 	/* get the interrupt URBs resubmitted unconditionally */ | 
 | 	for (i = 0; i < serial->num_ports; i++) { | 
 | 		port = serial->port[i]; | 
 | 		if (!port->interrupt_in_urb) { | 
 | 			dev_dbg(&port->dev, "%s: No interrupt URB for port\n", __func__); | 
 | 			continue; | 
 | 		} | 
 | 		err = usb_submit_urb(port->interrupt_in_urb, GFP_NOIO); | 
 | 		dev_dbg(&port->dev, "Submitted interrupt URB for port (result %d)\n", err); | 
 | 		if (err < 0) { | 
 | 			dev_err(&port->dev, "%s: Error %d for interrupt URB\n", | 
 | 				__func__, err); | 
 | 			goto err_out; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	for (i = 0; i < serial->num_ports; i++) { | 
 | 		/* walk all ports */ | 
 | 		port = serial->port[i]; | 
 | 		portdata = usb_get_serial_port_data(port); | 
 |  | 
 | 		/* skip closed ports */ | 
 | 		spin_lock_irq(&intfdata->susp_lock); | 
 | 		if (!portdata || !portdata->opened) { | 
 | 			spin_unlock_irq(&intfdata->susp_lock); | 
 | 			continue; | 
 | 		} | 
 |  | 
 | 		for (j = 0; j < N_IN_URB; j++) { | 
 | 			urb = portdata->in_urbs[j]; | 
 | 			err = usb_submit_urb(urb, GFP_ATOMIC); | 
 | 			if (err < 0) { | 
 | 				dev_err(&port->dev, "%s: Error %d for bulk URB %d\n", | 
 | 					__func__, err, i); | 
 | 				spin_unlock_irq(&intfdata->susp_lock); | 
 | 				goto err_out; | 
 | 			} | 
 | 		} | 
 | 		play_delayed(port); | 
 | 		spin_unlock_irq(&intfdata->susp_lock); | 
 | 	} | 
 | 	spin_lock_irq(&intfdata->susp_lock); | 
 | 	intfdata->suspended = 0; | 
 | 	spin_unlock_irq(&intfdata->susp_lock); | 
 | err_out: | 
 | 	return err; | 
 | } | 
 | EXPORT_SYMBOL(usb_wwan_resume); | 
 | #endif | 
 |  | 
 | MODULE_AUTHOR(DRIVER_AUTHOR); | 
 | MODULE_DESCRIPTION(DRIVER_DESC); | 
 | MODULE_LICENSE("GPL"); |