| /* Copyright (c) 2010, Code Aurora Forum. All rights reserved. | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or modify | 
 |  * it under the terms of the GNU General Public License version 2 and | 
 |  * only version 2 as published by the Free Software Foundation. | 
 |  */ | 
 |  | 
 | #include <linux/module.h> | 
 | #include <linux/platform_device.h> | 
 | #include <linux/pm_runtime.h> | 
 | #include <linux/usb/msm_hsusb_hw.h> | 
 | #include <linux/usb/ulpi.h> | 
 | #include <linux/usb/gadget.h> | 
 | #include <linux/usb/chipidea.h> | 
 |  | 
 | #include "ci.h" | 
 |  | 
 | #define MSM_USB_BASE	(ci->hw_bank.abs) | 
 |  | 
 | static void ci13xxx_msm_notify_event(struct ci13xxx *ci, unsigned event) | 
 | { | 
 | 	struct device *dev = ci->gadget.dev.parent; | 
 | 	int val; | 
 |  | 
 | 	switch (event) { | 
 | 	case CI13XXX_CONTROLLER_RESET_EVENT: | 
 | 		dev_dbg(dev, "CI13XXX_CONTROLLER_RESET_EVENT received\n"); | 
 | 		writel(0, USB_AHBBURST); | 
 | 		writel(0, USB_AHBMODE); | 
 | 		break; | 
 | 	case CI13XXX_CONTROLLER_STOPPED_EVENT: | 
 | 		dev_dbg(dev, "CI13XXX_CONTROLLER_STOPPED_EVENT received\n"); | 
 | 		/* | 
 | 		 * Put the transceiver in non-driving mode. Otherwise host | 
 | 		 * may not detect soft-disconnection. | 
 | 		 */ | 
 | 		val = usb_phy_io_read(ci->transceiver, ULPI_FUNC_CTRL); | 
 | 		val &= ~ULPI_FUNC_CTRL_OPMODE_MASK; | 
 | 		val |= ULPI_FUNC_CTRL_OPMODE_NONDRIVING; | 
 | 		usb_phy_io_write(ci->transceiver, val, ULPI_FUNC_CTRL); | 
 | 		break; | 
 | 	default: | 
 | 		dev_dbg(dev, "unknown ci13xxx event\n"); | 
 | 		break; | 
 | 	} | 
 | } | 
 |  | 
 | static struct ci13xxx_platform_data ci13xxx_msm_platdata = { | 
 | 	.name			= "ci13xxx_msm", | 
 | 	.flags			= CI13XXX_REGS_SHARED | | 
 | 				  CI13XXX_REQUIRE_TRANSCEIVER | | 
 | 				  CI13XXX_PULLUP_ON_VBUS | | 
 | 				  CI13XXX_DISABLE_STREAMING, | 
 |  | 
 | 	.notify_event		= ci13xxx_msm_notify_event, | 
 | }; | 
 |  | 
 | static int ci13xxx_msm_probe(struct platform_device *pdev) | 
 | { | 
 | 	struct platform_device *plat_ci; | 
 |  | 
 | 	dev_dbg(&pdev->dev, "ci13xxx_msm_probe\n"); | 
 |  | 
 | 	plat_ci = ci13xxx_add_device(&pdev->dev, | 
 | 				pdev->resource, pdev->num_resources, | 
 | 				&ci13xxx_msm_platdata); | 
 | 	if (IS_ERR(plat_ci)) { | 
 | 		dev_err(&pdev->dev, "ci13xxx_add_device failed!\n"); | 
 | 		return PTR_ERR(plat_ci); | 
 | 	} | 
 |  | 
 | 	platform_set_drvdata(pdev, plat_ci); | 
 |  | 
 | 	pm_runtime_no_callbacks(&pdev->dev); | 
 | 	pm_runtime_enable(&pdev->dev); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int ci13xxx_msm_remove(struct platform_device *pdev) | 
 | { | 
 | 	struct platform_device *plat_ci = platform_get_drvdata(pdev); | 
 |  | 
 | 	pm_runtime_disable(&pdev->dev); | 
 | 	ci13xxx_remove_device(plat_ci); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static struct platform_driver ci13xxx_msm_driver = { | 
 | 	.probe = ci13xxx_msm_probe, | 
 | 	.remove = ci13xxx_msm_remove, | 
 | 	.driver = { .name = "msm_hsusb", }, | 
 | }; | 
 |  | 
 | module_platform_driver(ci13xxx_msm_driver); | 
 |  | 
 | MODULE_ALIAS("platform:msm_hsusb"); | 
 | MODULE_LICENSE("GPL v2"); |