| /* | |
| * This file contains the handling of TX in wlan driver. | |
| */ | |
| #include <linux/hardirq.h> | |
| #include <linux/netdevice.h> | |
| #include <linux/etherdevice.h> | |
| #include <linux/sched.h> | |
| #include <linux/export.h> | |
| #include <net/cfg80211.h> | |
| #include "host.h" | |
| #include "radiotap.h" | |
| #include "decl.h" | |
| #include "defs.h" | |
| #include "dev.h" | |
| #include "mesh.h" | |
| /** | |
| * convert_radiotap_rate_to_mv - converts Tx/Rx rates from IEEE80211_RADIOTAP_RATE | |
| * units (500 Kb/s) into Marvell WLAN format (see Table 8 in Section 3.2.1) | |
| * | |
| * @rate: Input rate | |
| * returns: Output Rate (0 if invalid) | |
| */ | |
| static u32 convert_radiotap_rate_to_mv(u8 rate) | |
| { | |
| switch (rate) { | |
| case 2: /* 1 Mbps */ | |
| return 0 | (1 << 4); | |
| case 4: /* 2 Mbps */ | |
| return 1 | (1 << 4); | |
| case 11: /* 5.5 Mbps */ | |
| return 2 | (1 << 4); | |
| case 22: /* 11 Mbps */ | |
| return 3 | (1 << 4); | |
| case 12: /* 6 Mbps */ | |
| return 4 | (1 << 4); | |
| case 18: /* 9 Mbps */ | |
| return 5 | (1 << 4); | |
| case 24: /* 12 Mbps */ | |
| return 6 | (1 << 4); | |
| case 36: /* 18 Mbps */ | |
| return 7 | (1 << 4); | |
| case 48: /* 24 Mbps */ | |
| return 8 | (1 << 4); | |
| case 72: /* 36 Mbps */ | |
| return 9 | (1 << 4); | |
| case 96: /* 48 Mbps */ | |
| return 10 | (1 << 4); | |
| case 108: /* 54 Mbps */ | |
| return 11 | (1 << 4); | |
| } | |
| return 0; | |
| } | |
| /** | |
| * lbs_hard_start_xmit - checks the conditions and sends packet to IF | |
| * layer if everything is ok | |
| * | |
| * @skb: A pointer to skb which includes TX packet | |
| * @dev: A pointer to the &struct net_device | |
| * returns: 0 or -1 | |
| */ | |
| netdev_tx_t lbs_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) | |
| { | |
| unsigned long flags; | |
| struct lbs_private *priv = dev->ml_priv; | |
| struct txpd *txpd; | |
| char *p802x_hdr; | |
| uint16_t pkt_len; | |
| netdev_tx_t ret = NETDEV_TX_OK; | |
| lbs_deb_enter(LBS_DEB_TX); | |
| /* We need to protect against the queues being restarted before | |
| we get round to stopping them */ | |
| spin_lock_irqsave(&priv->driver_lock, flags); | |
| if (priv->surpriseremoved) | |
| goto free; | |
| if (!skb->len || (skb->len > MRVDRV_ETH_TX_PACKET_BUFFER_SIZE)) { | |
| lbs_deb_tx("tx err: skb length %d 0 or > %zd\n", | |
| skb->len, MRVDRV_ETH_TX_PACKET_BUFFER_SIZE); | |
| /* We'll never manage to send this one; drop it and return 'OK' */ | |
| dev->stats.tx_dropped++; | |
| dev->stats.tx_errors++; | |
| goto free; | |
| } | |
| netif_stop_queue(priv->dev); | |
| if (priv->mesh_dev) | |
| netif_stop_queue(priv->mesh_dev); | |
| if (priv->tx_pending_len) { | |
| /* This can happen if packets come in on the mesh and eth | |
| device simultaneously -- there's no mutual exclusion on | |
| hard_start_xmit() calls between devices. */ | |
| lbs_deb_tx("Packet on %s while busy\n", dev->name); | |
| ret = NETDEV_TX_BUSY; | |
| goto unlock; | |
| } | |
| priv->tx_pending_len = -1; | |
| spin_unlock_irqrestore(&priv->driver_lock, flags); | |
| lbs_deb_hex(LBS_DEB_TX, "TX Data", skb->data, min_t(unsigned int, skb->len, 100)); | |
| txpd = (void *)priv->tx_pending_buf; | |
| memset(txpd, 0, sizeof(struct txpd)); | |
| p802x_hdr = skb->data; | |
| pkt_len = skb->len; | |
| if (priv->wdev->iftype == NL80211_IFTYPE_MONITOR) { | |
| struct tx_radiotap_hdr *rtap_hdr = (void *)skb->data; | |
| /* set txpd fields from the radiotap header */ | |
| txpd->tx_control = cpu_to_le32(convert_radiotap_rate_to_mv(rtap_hdr->rate)); | |
| /* skip the radiotap header */ | |
| p802x_hdr += sizeof(*rtap_hdr); | |
| pkt_len -= sizeof(*rtap_hdr); | |
| /* copy destination address from 802.11 header */ | |
| memcpy(txpd->tx_dest_addr_high, p802x_hdr + 4, ETH_ALEN); | |
| } else { | |
| /* copy destination address from 802.3 header */ | |
| memcpy(txpd->tx_dest_addr_high, p802x_hdr, ETH_ALEN); | |
| } | |
| txpd->tx_packet_length = cpu_to_le16(pkt_len); | |
| txpd->tx_packet_location = cpu_to_le32(sizeof(struct txpd)); | |
| lbs_mesh_set_txpd(priv, dev, txpd); | |
| lbs_deb_hex(LBS_DEB_TX, "txpd", (u8 *) &txpd, sizeof(struct txpd)); | |
| lbs_deb_hex(LBS_DEB_TX, "Tx Data", (u8 *) p802x_hdr, le16_to_cpu(txpd->tx_packet_length)); | |
| memcpy(&txpd[1], p802x_hdr, le16_to_cpu(txpd->tx_packet_length)); | |
| spin_lock_irqsave(&priv->driver_lock, flags); | |
| priv->tx_pending_len = pkt_len + sizeof(struct txpd); | |
| lbs_deb_tx("%s lined up packet\n", __func__); | |
| dev->stats.tx_packets++; | |
| dev->stats.tx_bytes += skb->len; | |
| if (priv->wdev->iftype == NL80211_IFTYPE_MONITOR) { | |
| /* Keep the skb to echo it back once Tx feedback is | |
| received from FW */ | |
| skb_orphan(skb); | |
| /* Keep the skb around for when we get feedback */ | |
| priv->currenttxskb = skb; | |
| } else { | |
| free: | |
| dev_kfree_skb_any(skb); | |
| } | |
| unlock: | |
| spin_unlock_irqrestore(&priv->driver_lock, flags); | |
| wake_up(&priv->waitq); | |
| lbs_deb_leave_args(LBS_DEB_TX, "ret %d", ret); | |
| return ret; | |
| } | |
| /** | |
| * lbs_send_tx_feedback - sends to the host the last transmitted packet, | |
| * filling the radiotap headers with transmission information. | |
| * | |
| * @priv: A pointer to &struct lbs_private structure | |
| * @try_count: A 32-bit value containing transmission retry status. | |
| * | |
| * returns: void | |
| */ | |
| void lbs_send_tx_feedback(struct lbs_private *priv, u32 try_count) | |
| { | |
| struct tx_radiotap_hdr *radiotap_hdr; | |
| if (priv->wdev->iftype != NL80211_IFTYPE_MONITOR || | |
| priv->currenttxskb == NULL) | |
| return; | |
| radiotap_hdr = (struct tx_radiotap_hdr *)priv->currenttxskb->data; | |
| radiotap_hdr->data_retries = try_count ? | |
| (1 + priv->txretrycount - try_count) : 0; | |
| priv->currenttxskb->protocol = eth_type_trans(priv->currenttxskb, | |
| priv->dev); | |
| netif_rx(priv->currenttxskb); | |
| priv->currenttxskb = NULL; | |
| if (priv->connect_status == LBS_CONNECTED) | |
| netif_wake_queue(priv->dev); | |
| if (priv->mesh_dev && netif_running(priv->mesh_dev)) | |
| netif_wake_queue(priv->mesh_dev); | |
| } | |
| EXPORT_SYMBOL_GPL(lbs_send_tx_feedback); |