| /* | |
| * Platform device support for NXP PNX8550 SoCs | |
| * | |
| * Copyright 2005, Embedded Alley Solutions, Inc | |
| * | |
| * Based on arch/mips/au1000/common/platform.c | |
| * Platform device support for Au1x00 SoCs. | |
| * | |
| * Copyright 2004, Matt Porter <mporter@kernel.crashing.org> | |
| * | |
| * This file is licensed under the terms of the GNU General Public | |
| * License version 2. This program is licensed "as is" without any | |
| * warranty of any kind, whether express or implied. | |
| */ | |
| #include <linux/device.h> | |
| #include <linux/dma-mapping.h> | |
| #include <linux/kernel.h> | |
| #include <linux/init.h> | |
| #include <linux/resource.h> | |
| #include <linux/serial.h> | |
| #include <linux/serial_pnx8xxx.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/usb/ohci_pdriver.h> | |
| #include <int.h> | |
| #include <usb.h> | |
| #include <uart.h> | |
| static struct resource pnx8550_usb_ohci_resources[] = { | |
| [0] = { | |
| .start = PNX8550_USB_OHCI_OP_BASE, | |
| .end = PNX8550_USB_OHCI_OP_BASE + | |
| PNX8550_USB_OHCI_OP_LEN, | |
| .flags = IORESOURCE_MEM, | |
| }, | |
| [1] = { | |
| .start = PNX8550_INT_USB, | |
| .end = PNX8550_INT_USB, | |
| .flags = IORESOURCE_IRQ, | |
| }, | |
| }; | |
| static struct resource pnx8550_uart_resources[] = { | |
| [0] = { | |
| .start = PNX8550_UART_PORT0, | |
| .end = PNX8550_UART_PORT0 + 0xfff, | |
| .flags = IORESOURCE_MEM, | |
| }, | |
| [1] = { | |
| .start = PNX8550_UART_INT(0), | |
| .end = PNX8550_UART_INT(0), | |
| .flags = IORESOURCE_IRQ, | |
| }, | |
| [2] = { | |
| .start = PNX8550_UART_PORT1, | |
| .end = PNX8550_UART_PORT1 + 0xfff, | |
| .flags = IORESOURCE_MEM, | |
| }, | |
| [3] = { | |
| .start = PNX8550_UART_INT(1), | |
| .end = PNX8550_UART_INT(1), | |
| .flags = IORESOURCE_IRQ, | |
| }, | |
| }; | |
| struct pnx8xxx_port pnx8xxx_ports[] = { | |
| [0] = { | |
| .port = { | |
| .type = PORT_PNX8XXX, | |
| .iotype = UPIO_MEM, | |
| .membase = (void __iomem *)PNX8550_UART_PORT0, | |
| .mapbase = PNX8550_UART_PORT0, | |
| .irq = PNX8550_UART_INT(0), | |
| .uartclk = 3692300, | |
| .fifosize = 16, | |
| .flags = UPF_BOOT_AUTOCONF, | |
| .line = 0, | |
| }, | |
| }, | |
| [1] = { | |
| .port = { | |
| .type = PORT_PNX8XXX, | |
| .iotype = UPIO_MEM, | |
| .membase = (void __iomem *)PNX8550_UART_PORT1, | |
| .mapbase = PNX8550_UART_PORT1, | |
| .irq = PNX8550_UART_INT(1), | |
| .uartclk = 3692300, | |
| .fifosize = 16, | |
| .flags = UPF_BOOT_AUTOCONF, | |
| .line = 1, | |
| }, | |
| }, | |
| }; | |
| /* The dmamask must be set for OHCI to work */ | |
| static u64 ohci_dmamask = DMA_BIT_MASK(32); | |
| static u64 uart_dmamask = DMA_BIT_MASK(32); | |
| static int pnx8550_usb_ohci_power_on(struct platform_device *pdev) | |
| { | |
| /* | |
| * Set register CLK48CTL to enable and 48MHz | |
| */ | |
| outl(0x00000003, PCI_BASE | 0x0004770c); | |
| /* | |
| * Set register CLK12CTL to enable and 48MHz | |
| */ | |
| outl(0x00000003, PCI_BASE | 0x00047710); | |
| udelay(100); | |
| return 0; | |
| } | |
| static void pnx8550_usb_ohci_power_off(struct platform_device *pdev) | |
| { | |
| udelay(10); | |
| } | |
| static struct usb_ohci_pdata pnx8550_usb_ohci_pdata = { | |
| .power_on = pnx8550_usb_ohci_power_on, | |
| .power_off = pnx8550_usb_ohci_power_off, | |
| }; | |
| static struct platform_device pnx8550_usb_ohci_device = { | |
| .name = "ohci-platform", | |
| .id = -1, | |
| .dev = { | |
| .dma_mask = &ohci_dmamask, | |
| .coherent_dma_mask = DMA_BIT_MASK(32), | |
| .platform_data = &pnx8550_usb_ohci_pdata, | |
| }, | |
| .num_resources = ARRAY_SIZE(pnx8550_usb_ohci_resources), | |
| .resource = pnx8550_usb_ohci_resources, | |
| }; | |
| static struct platform_device pnx8550_uart_device = { | |
| .name = "pnx8xxx-uart", | |
| .id = -1, | |
| .dev = { | |
| .dma_mask = &uart_dmamask, | |
| .coherent_dma_mask = DMA_BIT_MASK(32), | |
| .platform_data = pnx8xxx_ports, | |
| }, | |
| .num_resources = ARRAY_SIZE(pnx8550_uart_resources), | |
| .resource = pnx8550_uart_resources, | |
| }; | |
| static struct platform_device *pnx8550_platform_devices[] __initdata = { | |
| &pnx8550_usb_ohci_device, | |
| &pnx8550_uart_device, | |
| }; | |
| static int __init pnx8550_platform_init(void) | |
| { | |
| return platform_add_devices(pnx8550_platform_devices, | |
| ARRAY_SIZE(pnx8550_platform_devices)); | |
| } | |
| arch_initcall(pnx8550_platform_init); |