| /******************************************************************* | |
| * This file is part of the Emulex Linux Device Driver for * | |
| * Fibre Channel Host Bus Adapters. * | |
| * Copyright (C) 2007-2011 Emulex. All rights reserved. * | |
| * EMULEX and SLI are trademarks of Emulex. * | |
| * www.emulex.com * | |
| * * | |
| * This program is free software; you can redistribute it and/or * | |
| * modify it under the terms of version 2 of the GNU General * | |
| * Public License as published by the Free Software Foundation. * | |
| * This program is distributed in the hope that it will be useful. * | |
| * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND * | |
| * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, * | |
| * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE * | |
| * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD * | |
| * TO BE LEGALLY INVALID. See the GNU General Public License for * | |
| * more details, a copy of which can be found in the file COPYING * | |
| * included with this package. * | |
| *******************************************************************/ | |
| #include <linux/blkdev.h> | |
| #include <linux/delay.h> | |
| #include <linux/dma-mapping.h> | |
| #include <linux/idr.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/kthread.h> | |
| #include <linux/slab.h> | |
| #include <linux/pci.h> | |
| #include <linux/spinlock.h> | |
| #include <linux/ctype.h> | |
| #include <scsi/scsi.h> | |
| #include <scsi/scsi_device.h> | |
| #include <scsi/scsi_host.h> | |
| #include <scsi/scsi_transport_fc.h> | |
| #include "lpfc_hw4.h" | |
| #include "lpfc_hw.h" | |
| #include "lpfc_sli.h" | |
| #include "lpfc_sli4.h" | |
| #include "lpfc_nl.h" | |
| #include "lpfc_disc.h" | |
| #include "lpfc_scsi.h" | |
| #include "lpfc.h" | |
| #include "lpfc_logmsg.h" | |
| #include "lpfc_crtn.h" | |
| #include "lpfc_vport.h" | |
| #include "lpfc_version.h" | |
| #include "lpfc_compat.h" | |
| #include "lpfc_debugfs.h" | |
| #ifdef CONFIG_SCSI_LPFC_DEBUG_FS | |
| /* | |
| * debugfs interface | |
| * | |
| * To access this interface the user should: | |
| * # mount -t debugfs none /sys/kernel/debug | |
| * | |
| * The lpfc debugfs directory hierarchy is: | |
| * /sys/kernel/debug/lpfc/fnX/vportY | |
| * where X is the lpfc hba function unique_id | |
| * where Y is the vport VPI on that hba | |
| * | |
| * Debugging services available per vport: | |
| * discovery_trace | |
| * This is an ACSII readable file that contains a trace of the last | |
| * lpfc_debugfs_max_disc_trc events that happened on a specific vport. | |
| * See lpfc_debugfs.h for different categories of discovery events. | |
| * To enable the discovery trace, the following module parameters must be set: | |
| * lpfc_debugfs_enable=1 Turns on lpfc debugfs filesystem support | |
| * lpfc_debugfs_max_disc_trc=X Where X is the event trace depth for | |
| * EACH vport. X MUST also be a power of 2. | |
| * lpfc_debugfs_mask_disc_trc=Y Where Y is an event mask as defined in | |
| * lpfc_debugfs.h . | |
| * | |
| * slow_ring_trace | |
| * This is an ACSII readable file that contains a trace of the last | |
| * lpfc_debugfs_max_slow_ring_trc events that happened on a specific HBA. | |
| * To enable the slow ring trace, the following module parameters must be set: | |
| * lpfc_debugfs_enable=1 Turns on lpfc debugfs filesystem support | |
| * lpfc_debugfs_max_slow_ring_trc=X Where X is the event trace depth for | |
| * the HBA. X MUST also be a power of 2. | |
| */ | |
| static int lpfc_debugfs_enable = 1; | |
| module_param(lpfc_debugfs_enable, int, S_IRUGO); | |
| MODULE_PARM_DESC(lpfc_debugfs_enable, "Enable debugfs services"); | |
| /* This MUST be a power of 2 */ | |
| static int lpfc_debugfs_max_disc_trc; | |
| module_param(lpfc_debugfs_max_disc_trc, int, S_IRUGO); | |
| MODULE_PARM_DESC(lpfc_debugfs_max_disc_trc, | |
| "Set debugfs discovery trace depth"); | |
| /* This MUST be a power of 2 */ | |
| static int lpfc_debugfs_max_slow_ring_trc; | |
| module_param(lpfc_debugfs_max_slow_ring_trc, int, S_IRUGO); | |
| MODULE_PARM_DESC(lpfc_debugfs_max_slow_ring_trc, | |
| "Set debugfs slow ring trace depth"); | |
| static int lpfc_debugfs_mask_disc_trc; | |
| module_param(lpfc_debugfs_mask_disc_trc, int, S_IRUGO); | |
| MODULE_PARM_DESC(lpfc_debugfs_mask_disc_trc, | |
| "Set debugfs discovery trace mask"); | |
| #include <linux/debugfs.h> | |
| static atomic_t lpfc_debugfs_seq_trc_cnt = ATOMIC_INIT(0); | |
| static unsigned long lpfc_debugfs_start_time = 0L; | |
| /* iDiag */ | |
| static struct lpfc_idiag idiag; | |
| /** | |
| * lpfc_debugfs_disc_trc_data - Dump discovery logging to a buffer | |
| * @vport: The vport to gather the log info from. | |
| * @buf: The buffer to dump log into. | |
| * @size: The maximum amount of data to process. | |
| * | |
| * Description: | |
| * This routine gathers the lpfc discovery debugfs data from the @vport and | |
| * dumps it to @buf up to @size number of bytes. It will start at the next entry | |
| * in the log and process the log until the end of the buffer. Then it will | |
| * gather from the beginning of the log and process until the current entry. | |
| * | |
| * Notes: | |
| * Discovery logging will be disabled while while this routine dumps the log. | |
| * | |
| * Return Value: | |
| * This routine returns the amount of bytes that were dumped into @buf and will | |
| * not exceed @size. | |
| **/ | |
| static int | |
| lpfc_debugfs_disc_trc_data(struct lpfc_vport *vport, char *buf, int size) | |
| { | |
| int i, index, len, enable; | |
| uint32_t ms; | |
| struct lpfc_debugfs_trc *dtp; | |
| char buffer[LPFC_DEBUG_TRC_ENTRY_SIZE]; | |
| enable = lpfc_debugfs_enable; | |
| lpfc_debugfs_enable = 0; | |
| len = 0; | |
| index = (atomic_read(&vport->disc_trc_cnt) + 1) & | |
| (lpfc_debugfs_max_disc_trc - 1); | |
| for (i = index; i < lpfc_debugfs_max_disc_trc; i++) { | |
| dtp = vport->disc_trc + i; | |
| if (!dtp->fmt) | |
| continue; | |
| ms = jiffies_to_msecs(dtp->jif - lpfc_debugfs_start_time); | |
| snprintf(buffer, | |
| LPFC_DEBUG_TRC_ENTRY_SIZE, "%010d:%010d ms:%s\n", | |
| dtp->seq_cnt, ms, dtp->fmt); | |
| len += snprintf(buf+len, size-len, buffer, | |
| dtp->data1, dtp->data2, dtp->data3); | |
| } | |
| for (i = 0; i < index; i++) { | |
| dtp = vport->disc_trc + i; | |
| if (!dtp->fmt) | |
| continue; | |
| ms = jiffies_to_msecs(dtp->jif - lpfc_debugfs_start_time); | |
| snprintf(buffer, | |
| LPFC_DEBUG_TRC_ENTRY_SIZE, "%010d:%010d ms:%s\n", | |
| dtp->seq_cnt, ms, dtp->fmt); | |
| len += snprintf(buf+len, size-len, buffer, | |
| dtp->data1, dtp->data2, dtp->data3); | |
| } | |
| lpfc_debugfs_enable = enable; | |
| return len; | |
| } | |
| /** | |
| * lpfc_debugfs_slow_ring_trc_data - Dump slow ring logging to a buffer | |
| * @phba: The HBA to gather the log info from. | |
| * @buf: The buffer to dump log into. | |
| * @size: The maximum amount of data to process. | |
| * | |
| * Description: | |
| * This routine gathers the lpfc slow ring debugfs data from the @phba and | |
| * dumps it to @buf up to @size number of bytes. It will start at the next entry | |
| * in the log and process the log until the end of the buffer. Then it will | |
| * gather from the beginning of the log and process until the current entry. | |
| * | |
| * Notes: | |
| * Slow ring logging will be disabled while while this routine dumps the log. | |
| * | |
| * Return Value: | |
| * This routine returns the amount of bytes that were dumped into @buf and will | |
| * not exceed @size. | |
| **/ | |
| static int | |
| lpfc_debugfs_slow_ring_trc_data(struct lpfc_hba *phba, char *buf, int size) | |
| { | |
| int i, index, len, enable; | |
| uint32_t ms; | |
| struct lpfc_debugfs_trc *dtp; | |
| char buffer[LPFC_DEBUG_TRC_ENTRY_SIZE]; | |
| enable = lpfc_debugfs_enable; | |
| lpfc_debugfs_enable = 0; | |
| len = 0; | |
| index = (atomic_read(&phba->slow_ring_trc_cnt) + 1) & | |
| (lpfc_debugfs_max_slow_ring_trc - 1); | |
| for (i = index; i < lpfc_debugfs_max_slow_ring_trc; i++) { | |
| dtp = phba->slow_ring_trc + i; | |
| if (!dtp->fmt) | |
| continue; | |
| ms = jiffies_to_msecs(dtp->jif - lpfc_debugfs_start_time); | |
| snprintf(buffer, | |
| LPFC_DEBUG_TRC_ENTRY_SIZE, "%010d:%010d ms:%s\n", | |
| dtp->seq_cnt, ms, dtp->fmt); | |
| len += snprintf(buf+len, size-len, buffer, | |
| dtp->data1, dtp->data2, dtp->data3); | |
| } | |
| for (i = 0; i < index; i++) { | |
| dtp = phba->slow_ring_trc + i; | |
| if (!dtp->fmt) | |
| continue; | |
| ms = jiffies_to_msecs(dtp->jif - lpfc_debugfs_start_time); | |
| snprintf(buffer, | |
| LPFC_DEBUG_TRC_ENTRY_SIZE, "%010d:%010d ms:%s\n", | |
| dtp->seq_cnt, ms, dtp->fmt); | |
| len += snprintf(buf+len, size-len, buffer, | |
| dtp->data1, dtp->data2, dtp->data3); | |
| } | |
| lpfc_debugfs_enable = enable; | |
| return len; | |
| } | |
| static int lpfc_debugfs_last_hbq = -1; | |
| /** | |
| * lpfc_debugfs_hbqinfo_data - Dump host buffer queue info to a buffer | |
| * @phba: The HBA to gather host buffer info from. | |
| * @buf: The buffer to dump log into. | |
| * @size: The maximum amount of data to process. | |
| * | |
| * Description: | |
| * This routine dumps the host buffer queue info from the @phba to @buf up to | |
| * @size number of bytes. A header that describes the current hbq state will be | |
| * dumped to @buf first and then info on each hbq entry will be dumped to @buf | |
| * until @size bytes have been dumped or all the hbq info has been dumped. | |
| * | |
| * Notes: | |
| * This routine will rotate through each configured HBQ each time called. | |
| * | |
| * Return Value: | |
| * This routine returns the amount of bytes that were dumped into @buf and will | |
| * not exceed @size. | |
| **/ | |
| static int | |
| lpfc_debugfs_hbqinfo_data(struct lpfc_hba *phba, char *buf, int size) | |
| { | |
| int len = 0; | |
| int cnt, i, j, found, posted, low; | |
| uint32_t phys, raw_index, getidx; | |
| struct lpfc_hbq_init *hip; | |
| struct hbq_s *hbqs; | |
| struct lpfc_hbq_entry *hbqe; | |
| struct lpfc_dmabuf *d_buf; | |
| struct hbq_dmabuf *hbq_buf; | |
| if (phba->sli_rev != 3) | |
| return 0; | |
| cnt = LPFC_HBQINFO_SIZE; | |
| spin_lock_irq(&phba->hbalock); | |
| /* toggle between multiple hbqs, if any */ | |
| i = lpfc_sli_hbq_count(); | |
| if (i > 1) { | |
| lpfc_debugfs_last_hbq++; | |
| if (lpfc_debugfs_last_hbq >= i) | |
| lpfc_debugfs_last_hbq = 0; | |
| } | |
| else | |
| lpfc_debugfs_last_hbq = 0; | |
| i = lpfc_debugfs_last_hbq; | |
| len += snprintf(buf+len, size-len, "HBQ %d Info\n", i); | |
| hbqs = &phba->hbqs[i]; | |
| posted = 0; | |
| list_for_each_entry(d_buf, &hbqs->hbq_buffer_list, list) | |
| posted++; | |
| hip = lpfc_hbq_defs[i]; | |
| len += snprintf(buf+len, size-len, | |
| "idx:%d prof:%d rn:%d bufcnt:%d icnt:%d acnt:%d posted %d\n", | |
| hip->hbq_index, hip->profile, hip->rn, | |
| hip->buffer_count, hip->init_count, hip->add_count, posted); | |
| raw_index = phba->hbq_get[i]; | |
| getidx = le32_to_cpu(raw_index); | |
| len += snprintf(buf+len, size-len, | |
| "entrys:%d bufcnt:%d Put:%d nPut:%d localGet:%d hbaGet:%d\n", | |
| hbqs->entry_count, hbqs->buffer_count, hbqs->hbqPutIdx, | |
| hbqs->next_hbqPutIdx, hbqs->local_hbqGetIdx, getidx); | |
| hbqe = (struct lpfc_hbq_entry *) phba->hbqs[i].hbq_virt; | |
| for (j=0; j<hbqs->entry_count; j++) { | |
| len += snprintf(buf+len, size-len, | |
| "%03d: %08x %04x %05x ", j, | |
| le32_to_cpu(hbqe->bde.addrLow), | |
| le32_to_cpu(hbqe->bde.tus.w), | |
| le32_to_cpu(hbqe->buffer_tag)); | |
| i = 0; | |
| found = 0; | |
| /* First calculate if slot has an associated posted buffer */ | |
| low = hbqs->hbqPutIdx - posted; | |
| if (low >= 0) { | |
| if ((j >= hbqs->hbqPutIdx) || (j < low)) { | |
| len += snprintf(buf+len, size-len, "Unused\n"); | |
| goto skipit; | |
| } | |
| } | |
| else { | |
| if ((j >= hbqs->hbqPutIdx) && | |
| (j < (hbqs->entry_count+low))) { | |
| len += snprintf(buf+len, size-len, "Unused\n"); | |
| goto skipit; | |
| } | |
| } | |
| /* Get the Buffer info for the posted buffer */ | |
| list_for_each_entry(d_buf, &hbqs->hbq_buffer_list, list) { | |
| hbq_buf = container_of(d_buf, struct hbq_dmabuf, dbuf); | |
| phys = ((uint64_t)hbq_buf->dbuf.phys & 0xffffffff); | |
| if (phys == le32_to_cpu(hbqe->bde.addrLow)) { | |
| len += snprintf(buf+len, size-len, | |
| "Buf%d: %p %06x\n", i, | |
| hbq_buf->dbuf.virt, hbq_buf->tag); | |
| found = 1; | |
| break; | |
| } | |
| i++; | |
| } | |
| if (!found) { | |
| len += snprintf(buf+len, size-len, "No DMAinfo?\n"); | |
| } | |
| skipit: | |
| hbqe++; | |
| if (len > LPFC_HBQINFO_SIZE - 54) | |
| break; | |
| } | |
| spin_unlock_irq(&phba->hbalock); | |
| return len; | |
| } | |
| static int lpfc_debugfs_last_hba_slim_off; | |
| /** | |
| * lpfc_debugfs_dumpHBASlim_data - Dump HBA SLIM info to a buffer | |
| * @phba: The HBA to gather SLIM info from. | |
| * @buf: The buffer to dump log into. | |
| * @size: The maximum amount of data to process. | |
| * | |
| * Description: | |
| * This routine dumps the current contents of HBA SLIM for the HBA associated | |
| * with @phba to @buf up to @size bytes of data. This is the raw HBA SLIM data. | |
| * | |
| * Notes: | |
| * This routine will only dump up to 1024 bytes of data each time called and | |
| * should be called multiple times to dump the entire HBA SLIM. | |
| * | |
| * Return Value: | |
| * This routine returns the amount of bytes that were dumped into @buf and will | |
| * not exceed @size. | |
| **/ | |
| static int | |
| lpfc_debugfs_dumpHBASlim_data(struct lpfc_hba *phba, char *buf, int size) | |
| { | |
| int len = 0; | |
| int i, off; | |
| uint32_t *ptr; | |
| char buffer[1024]; | |
| off = 0; | |
| spin_lock_irq(&phba->hbalock); | |
| len += snprintf(buf+len, size-len, "HBA SLIM\n"); | |
| lpfc_memcpy_from_slim(buffer, | |
| phba->MBslimaddr + lpfc_debugfs_last_hba_slim_off, 1024); | |
| ptr = (uint32_t *)&buffer[0]; | |
| off = lpfc_debugfs_last_hba_slim_off; | |
| /* Set it up for the next time */ | |
| lpfc_debugfs_last_hba_slim_off += 1024; | |
| if (lpfc_debugfs_last_hba_slim_off >= 4096) | |
| lpfc_debugfs_last_hba_slim_off = 0; | |
| i = 1024; | |
| while (i > 0) { | |
| len += snprintf(buf+len, size-len, | |
| "%08x: %08x %08x %08x %08x %08x %08x %08x %08x\n", | |
| off, *ptr, *(ptr+1), *(ptr+2), *(ptr+3), *(ptr+4), | |
| *(ptr+5), *(ptr+6), *(ptr+7)); | |
| ptr += 8; | |
| i -= (8 * sizeof(uint32_t)); | |
| off += (8 * sizeof(uint32_t)); | |
| } | |
| spin_unlock_irq(&phba->hbalock); | |
| return len; | |
| } | |
| /** | |
| * lpfc_debugfs_dumpHostSlim_data - Dump host SLIM info to a buffer | |
| * @phba: The HBA to gather Host SLIM info from. | |
| * @buf: The buffer to dump log into. | |
| * @size: The maximum amount of data to process. | |
| * | |
| * Description: | |
| * This routine dumps the current contents of host SLIM for the host associated | |
| * with @phba to @buf up to @size bytes of data. The dump will contain the | |
| * Mailbox, PCB, Rings, and Registers that are located in host memory. | |
| * | |
| * Return Value: | |
| * This routine returns the amount of bytes that were dumped into @buf and will | |
| * not exceed @size. | |
| **/ | |
| static int | |
| lpfc_debugfs_dumpHostSlim_data(struct lpfc_hba *phba, char *buf, int size) | |
| { | |
| int len = 0; | |
| int i, off; | |
| uint32_t word0, word1, word2, word3; | |
| uint32_t *ptr; | |
| struct lpfc_pgp *pgpp; | |
| struct lpfc_sli *psli = &phba->sli; | |
| struct lpfc_sli_ring *pring; | |
| off = 0; | |
| spin_lock_irq(&phba->hbalock); | |
| len += snprintf(buf+len, size-len, "SLIM Mailbox\n"); | |
| ptr = (uint32_t *)phba->slim2p.virt; | |
| i = sizeof(MAILBOX_t); | |
| while (i > 0) { | |
| len += snprintf(buf+len, size-len, | |
| "%08x: %08x %08x %08x %08x %08x %08x %08x %08x\n", | |
| off, *ptr, *(ptr+1), *(ptr+2), *(ptr+3), *(ptr+4), | |
| *(ptr+5), *(ptr+6), *(ptr+7)); | |
| ptr += 8; | |
| i -= (8 * sizeof(uint32_t)); | |
| off += (8 * sizeof(uint32_t)); | |
| } | |
| len += snprintf(buf+len, size-len, "SLIM PCB\n"); | |
| ptr = (uint32_t *)phba->pcb; | |
| i = sizeof(PCB_t); | |
| while (i > 0) { | |
| len += snprintf(buf+len, size-len, | |
| "%08x: %08x %08x %08x %08x %08x %08x %08x %08x\n", | |
| off, *ptr, *(ptr+1), *(ptr+2), *(ptr+3), *(ptr+4), | |
| *(ptr+5), *(ptr+6), *(ptr+7)); | |
| ptr += 8; | |
| i -= (8 * sizeof(uint32_t)); | |
| off += (8 * sizeof(uint32_t)); | |
| } | |
| for (i = 0; i < 4; i++) { | |
| pgpp = &phba->port_gp[i]; | |
| pring = &psli->ring[i]; | |
| len += snprintf(buf+len, size-len, | |
| "Ring %d: CMD GetInx:%d (Max:%d Next:%d " | |
| "Local:%d flg:x%x) RSP PutInx:%d Max:%d\n", | |
| i, pgpp->cmdGetInx, pring->numCiocb, | |
| pring->next_cmdidx, pring->local_getidx, | |
| pring->flag, pgpp->rspPutInx, pring->numRiocb); | |
| } | |
| if (phba->sli_rev <= LPFC_SLI_REV3) { | |
| word0 = readl(phba->HAregaddr); | |
| word1 = readl(phba->CAregaddr); | |
| word2 = readl(phba->HSregaddr); | |
| word3 = readl(phba->HCregaddr); | |
| len += snprintf(buf+len, size-len, "HA:%08x CA:%08x HS:%08x " | |
| "HC:%08x\n", word0, word1, word2, word3); | |
| } | |
| spin_unlock_irq(&phba->hbalock); | |
| return len; | |
| } | |
| /** | |
| * lpfc_debugfs_nodelist_data - Dump target node list to a buffer | |
| * @vport: The vport to gather target node info from. | |
| * @buf: The buffer to dump log into. | |
| * @size: The maximum amount of data to process. | |
| * | |
| * Description: | |
| * This routine dumps the current target node list associated with @vport to | |
| * @buf up to @size bytes of data. Each node entry in the dump will contain a | |
| * node state, DID, WWPN, WWNN, RPI, flags, type, and other useful fields. | |
| * | |
| * Return Value: | |
| * This routine returns the amount of bytes that were dumped into @buf and will | |
| * not exceed @size. | |
| **/ | |
| static int | |
| lpfc_debugfs_nodelist_data(struct lpfc_vport *vport, char *buf, int size) | |
| { | |
| int len = 0; | |
| int cnt; | |
| struct Scsi_Host *shost = lpfc_shost_from_vport(vport); | |
| struct lpfc_nodelist *ndlp; | |
| unsigned char *statep, *name; | |
| cnt = (LPFC_NODELIST_SIZE / LPFC_NODELIST_ENTRY_SIZE); | |
| spin_lock_irq(shost->host_lock); | |
| list_for_each_entry(ndlp, &vport->fc_nodes, nlp_listp) { | |
| if (!cnt) { | |
| len += snprintf(buf+len, size-len, | |
| "Missing Nodelist Entries\n"); | |
| break; | |
| } | |
| cnt--; | |
| switch (ndlp->nlp_state) { | |
| case NLP_STE_UNUSED_NODE: | |
| statep = "UNUSED"; | |
| break; | |
| case NLP_STE_PLOGI_ISSUE: | |
| statep = "PLOGI "; | |
| break; | |
| case NLP_STE_ADISC_ISSUE: | |
| statep = "ADISC "; | |
| break; | |
| case NLP_STE_REG_LOGIN_ISSUE: | |
| statep = "REGLOG"; | |
| break; | |
| case NLP_STE_PRLI_ISSUE: | |
| statep = "PRLI "; | |
| break; | |
| case NLP_STE_UNMAPPED_NODE: | |
| statep = "UNMAP "; | |
| break; | |
| case NLP_STE_MAPPED_NODE: | |
| statep = "MAPPED"; | |
| break; | |
| case NLP_STE_NPR_NODE: | |
| statep = "NPR "; | |
| break; | |
| default: | |
| statep = "UNKNOWN"; | |
| } | |
| len += snprintf(buf+len, size-len, "%s DID:x%06x ", | |
| statep, ndlp->nlp_DID); | |
| name = (unsigned char *)&ndlp->nlp_portname; | |
| len += snprintf(buf+len, size-len, | |
| "WWPN %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x ", | |
| *name, *(name+1), *(name+2), *(name+3), | |
| *(name+4), *(name+5), *(name+6), *(name+7)); | |
| name = (unsigned char *)&ndlp->nlp_nodename; | |
| len += snprintf(buf+len, size-len, | |
| "WWNN %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x ", | |
| *name, *(name+1), *(name+2), *(name+3), | |
| *(name+4), *(name+5), *(name+6), *(name+7)); | |
| len += snprintf(buf+len, size-len, "RPI:%03d flag:x%08x ", | |
| ndlp->nlp_rpi, ndlp->nlp_flag); | |
| if (!ndlp->nlp_type) | |
| len += snprintf(buf+len, size-len, "UNKNOWN_TYPE "); | |
| if (ndlp->nlp_type & NLP_FC_NODE) | |
| len += snprintf(buf+len, size-len, "FC_NODE "); | |
| if (ndlp->nlp_type & NLP_FABRIC) | |
| len += snprintf(buf+len, size-len, "FABRIC "); | |
| if (ndlp->nlp_type & NLP_FCP_TARGET) | |
| len += snprintf(buf+len, size-len, "FCP_TGT sid:%d ", | |
| ndlp->nlp_sid); | |
| if (ndlp->nlp_type & NLP_FCP_INITIATOR) | |
| len += snprintf(buf+len, size-len, "FCP_INITIATOR "); | |
| len += snprintf(buf+len, size-len, "usgmap:%x ", | |
| ndlp->nlp_usg_map); | |
| len += snprintf(buf+len, size-len, "refcnt:%x", | |
| atomic_read(&ndlp->kref.refcount)); | |
| len += snprintf(buf+len, size-len, "\n"); | |
| } | |
| spin_unlock_irq(shost->host_lock); | |
| return len; | |
| } | |
| #endif | |
| /** | |
| * lpfc_debugfs_disc_trc - Store discovery trace log | |
| * @vport: The vport to associate this trace string with for retrieval. | |
| * @mask: Log entry classification. | |
| * @fmt: Format string to be displayed when dumping the log. | |
| * @data1: 1st data parameter to be applied to @fmt. | |
| * @data2: 2nd data parameter to be applied to @fmt. | |
| * @data3: 3rd data parameter to be applied to @fmt. | |
| * | |
| * Description: | |
| * This routine is used by the driver code to add a debugfs log entry to the | |
| * discovery trace buffer associated with @vport. Only entries with a @mask that | |
| * match the current debugfs discovery mask will be saved. Entries that do not | |
| * match will be thrown away. @fmt, @data1, @data2, and @data3 are used like | |
| * printf when displaying the log. | |
| **/ | |
| inline void | |
| lpfc_debugfs_disc_trc(struct lpfc_vport *vport, int mask, char *fmt, | |
| uint32_t data1, uint32_t data2, uint32_t data3) | |
| { | |
| #ifdef CONFIG_SCSI_LPFC_DEBUG_FS | |
| struct lpfc_debugfs_trc *dtp; | |
| int index; | |
| if (!(lpfc_debugfs_mask_disc_trc & mask)) | |
| return; | |
| if (!lpfc_debugfs_enable || !lpfc_debugfs_max_disc_trc || | |
| !vport || !vport->disc_trc) | |
| return; | |
| index = atomic_inc_return(&vport->disc_trc_cnt) & | |
| (lpfc_debugfs_max_disc_trc - 1); | |
| dtp = vport->disc_trc + index; | |
| dtp->fmt = fmt; | |
| dtp->data1 = data1; | |
| dtp->data2 = data2; | |
| dtp->data3 = data3; | |
| dtp->seq_cnt = atomic_inc_return(&lpfc_debugfs_seq_trc_cnt); | |
| dtp->jif = jiffies; | |
| #endif | |
| return; | |
| } | |
| /** | |
| * lpfc_debugfs_slow_ring_trc - Store slow ring trace log | |
| * @phba: The phba to associate this trace string with for retrieval. | |
| * @fmt: Format string to be displayed when dumping the log. | |
| * @data1: 1st data parameter to be applied to @fmt. | |
| * @data2: 2nd data parameter to be applied to @fmt. | |
| * @data3: 3rd data parameter to be applied to @fmt. | |
| * | |
| * Description: | |
| * This routine is used by the driver code to add a debugfs log entry to the | |
| * discovery trace buffer associated with @vport. @fmt, @data1, @data2, and | |
| * @data3 are used like printf when displaying the log. | |
| **/ | |
| inline void | |
| lpfc_debugfs_slow_ring_trc(struct lpfc_hba *phba, char *fmt, | |
| uint32_t data1, uint32_t data2, uint32_t data3) | |
| { | |
| #ifdef CONFIG_SCSI_LPFC_DEBUG_FS | |
| struct lpfc_debugfs_trc *dtp; | |
| int index; | |
| if (!lpfc_debugfs_enable || !lpfc_debugfs_max_slow_ring_trc || | |
| !phba || !phba->slow_ring_trc) | |
| return; | |
| index = atomic_inc_return(&phba->slow_ring_trc_cnt) & | |
| (lpfc_debugfs_max_slow_ring_trc - 1); | |
| dtp = phba->slow_ring_trc + index; | |
| dtp->fmt = fmt; | |
| dtp->data1 = data1; | |
| dtp->data2 = data2; | |
| dtp->data3 = data3; | |
| dtp->seq_cnt = atomic_inc_return(&lpfc_debugfs_seq_trc_cnt); | |
| dtp->jif = jiffies; | |
| #endif | |
| return; | |
| } | |
| #ifdef CONFIG_SCSI_LPFC_DEBUG_FS | |
| /** | |
| * lpfc_debugfs_disc_trc_open - Open the discovery trace log | |
| * @inode: The inode pointer that contains a vport pointer. | |
| * @file: The file pointer to attach the log output. | |
| * | |
| * Description: | |
| * This routine is the entry point for the debugfs open file operation. It gets | |
| * the vport from the i_private field in @inode, allocates the necessary buffer | |
| * for the log, fills the buffer from the in-memory log for this vport, and then | |
| * returns a pointer to that log in the private_data field in @file. | |
| * | |
| * Returns: | |
| * This function returns zero if successful. On error it will return an negative | |
| * error value. | |
| **/ | |
| static int | |
| lpfc_debugfs_disc_trc_open(struct inode *inode, struct file *file) | |
| { | |
| struct lpfc_vport *vport = inode->i_private; | |
| struct lpfc_debug *debug; | |
| int size; | |
| int rc = -ENOMEM; | |
| if (!lpfc_debugfs_max_disc_trc) { | |
| rc = -ENOSPC; | |
| goto out; | |
| } | |
| debug = kmalloc(sizeof(*debug), GFP_KERNEL); | |
| if (!debug) | |
| goto out; | |
| /* Round to page boundary */ | |
| size = (lpfc_debugfs_max_disc_trc * LPFC_DEBUG_TRC_ENTRY_SIZE); | |
| size = PAGE_ALIGN(size); | |
| debug->buffer = kmalloc(size, GFP_KERNEL); | |
| if (!debug->buffer) { | |
| kfree(debug); | |
| goto out; | |
| } | |
| debug->len = lpfc_debugfs_disc_trc_data(vport, debug->buffer, size); | |
| file->private_data = debug; | |
| rc = 0; | |
| out: | |
| return rc; | |
| } | |
| /** | |
| * lpfc_debugfs_slow_ring_trc_open - Open the Slow Ring trace log | |
| * @inode: The inode pointer that contains a vport pointer. | |
| * @file: The file pointer to attach the log output. | |
| * | |
| * Description: | |
| * This routine is the entry point for the debugfs open file operation. It gets | |
| * the vport from the i_private field in @inode, allocates the necessary buffer | |
| * for the log, fills the buffer from the in-memory log for this vport, and then | |
| * returns a pointer to that log in the private_data field in @file. | |
| * | |
| * Returns: | |
| * This function returns zero if successful. On error it will return an negative | |
| * error value. | |
| **/ | |
| static int | |
| lpfc_debugfs_slow_ring_trc_open(struct inode *inode, struct file *file) | |
| { | |
| struct lpfc_hba *phba = inode->i_private; | |
| struct lpfc_debug *debug; | |
| int size; | |
| int rc = -ENOMEM; | |
| if (!lpfc_debugfs_max_slow_ring_trc) { | |
| rc = -ENOSPC; | |
| goto out; | |
| } | |
| debug = kmalloc(sizeof(*debug), GFP_KERNEL); | |
| if (!debug) | |
| goto out; | |
| /* Round to page boundary */ | |
| size = (lpfc_debugfs_max_slow_ring_trc * LPFC_DEBUG_TRC_ENTRY_SIZE); | |
| size = PAGE_ALIGN(size); | |
| debug->buffer = kmalloc(size, GFP_KERNEL); | |
| if (!debug->buffer) { | |
| kfree(debug); | |
| goto out; | |
| } | |
| debug->len = lpfc_debugfs_slow_ring_trc_data(phba, debug->buffer, size); | |
| file->private_data = debug; | |
| rc = 0; | |
| out: | |
| return rc; | |
| } | |
| /** | |
| * lpfc_debugfs_hbqinfo_open - Open the hbqinfo debugfs buffer | |
| * @inode: The inode pointer that contains a vport pointer. | |
| * @file: The file pointer to attach the log output. | |
| * | |
| * Description: | |
| * This routine is the entry point for the debugfs open file operation. It gets | |
| * the vport from the i_private field in @inode, allocates the necessary buffer | |
| * for the log, fills the buffer from the in-memory log for this vport, and then | |
| * returns a pointer to that log in the private_data field in @file. | |
| * | |
| * Returns: | |
| * This function returns zero if successful. On error it will return an negative | |
| * error value. | |
| **/ | |
| static int | |
| lpfc_debugfs_hbqinfo_open(struct inode *inode, struct file *file) | |
| { | |
| struct lpfc_hba *phba = inode->i_private; | |
| struct lpfc_debug *debug; | |
| int rc = -ENOMEM; | |
| debug = kmalloc(sizeof(*debug), GFP_KERNEL); | |
| if (!debug) | |
| goto out; | |
| /* Round to page boundary */ | |
| debug->buffer = kmalloc(LPFC_HBQINFO_SIZE, GFP_KERNEL); | |
| if (!debug->buffer) { | |
| kfree(debug); | |
| goto out; | |
| } | |
| debug->len = lpfc_debugfs_hbqinfo_data(phba, debug->buffer, | |
| LPFC_HBQINFO_SIZE); | |
| file->private_data = debug; | |
| rc = 0; | |
| out: | |
| return rc; | |
| } | |
| /** | |
| * lpfc_debugfs_dumpHBASlim_open - Open the Dump HBA SLIM debugfs buffer | |
| * @inode: The inode pointer that contains a vport pointer. | |
| * @file: The file pointer to attach the log output. | |
| * | |
| * Description: | |
| * This routine is the entry point for the debugfs open file operation. It gets | |
| * the vport from the i_private field in @inode, allocates the necessary buffer | |
| * for the log, fills the buffer from the in-memory log for this vport, and then | |
| * returns a pointer to that log in the private_data field in @file. | |
| * | |
| * Returns: | |
| * This function returns zero if successful. On error it will return an negative | |
| * error value. | |
| **/ | |
| static int | |
| lpfc_debugfs_dumpHBASlim_open(struct inode *inode, struct file *file) | |
| { | |
| struct lpfc_hba *phba = inode->i_private; | |
| struct lpfc_debug *debug; | |
| int rc = -ENOMEM; | |
| debug = kmalloc(sizeof(*debug), GFP_KERNEL); | |
| if (!debug) | |
| goto out; | |
| /* Round to page boundary */ | |
| debug->buffer = kmalloc(LPFC_DUMPHBASLIM_SIZE, GFP_KERNEL); | |
| if (!debug->buffer) { | |
| kfree(debug); | |
| goto out; | |
| } | |
| debug->len = lpfc_debugfs_dumpHBASlim_data(phba, debug->buffer, | |
| LPFC_DUMPHBASLIM_SIZE); | |
| file->private_data = debug; | |
| rc = 0; | |
| out: | |
| return rc; | |
| } | |
| /** | |
| * lpfc_debugfs_dumpHostSlim_open - Open the Dump Host SLIM debugfs buffer | |
| * @inode: The inode pointer that contains a vport pointer. | |
| * @file: The file pointer to attach the log output. | |
| * | |
| * Description: | |
| * This routine is the entry point for the debugfs open file operation. It gets | |
| * the vport from the i_private field in @inode, allocates the necessary buffer | |
| * for the log, fills the buffer from the in-memory log for this vport, and then | |
| * returns a pointer to that log in the private_data field in @file. | |
| * | |
| * Returns: | |
| * This function returns zero if successful. On error it will return an negative | |
| * error value. | |
| **/ | |
| static int | |
| lpfc_debugfs_dumpHostSlim_open(struct inode *inode, struct file *file) | |
| { | |
| struct lpfc_hba *phba = inode->i_private; | |
| struct lpfc_debug *debug; | |
| int rc = -ENOMEM; | |
| debug = kmalloc(sizeof(*debug), GFP_KERNEL); | |
| if (!debug) | |
| goto out; | |
| /* Round to page boundary */ | |
| debug->buffer = kmalloc(LPFC_DUMPHOSTSLIM_SIZE, GFP_KERNEL); | |
| if (!debug->buffer) { | |
| kfree(debug); | |
| goto out; | |
| } | |
| debug->len = lpfc_debugfs_dumpHostSlim_data(phba, debug->buffer, | |
| LPFC_DUMPHOSTSLIM_SIZE); | |
| file->private_data = debug; | |
| rc = 0; | |
| out: | |
| return rc; | |
| } | |
| static int | |
| lpfc_debugfs_dumpData_open(struct inode *inode, struct file *file) | |
| { | |
| struct lpfc_debug *debug; | |
| int rc = -ENOMEM; | |
| if (!_dump_buf_data) | |
| return -EBUSY; | |
| debug = kmalloc(sizeof(*debug), GFP_KERNEL); | |
| if (!debug) | |
| goto out; | |
| /* Round to page boundry */ | |
| printk(KERN_ERR "9059 BLKGRD: %s: _dump_buf_data=0x%p\n", | |
| __func__, _dump_buf_data); | |
| debug->buffer = _dump_buf_data; | |
| if (!debug->buffer) { | |
| kfree(debug); | |
| goto out; | |
| } | |
| debug->len = (1 << _dump_buf_data_order) << PAGE_SHIFT; | |
| file->private_data = debug; | |
| rc = 0; | |
| out: | |
| return rc; | |
| } | |
| static int | |
| lpfc_debugfs_dumpDif_open(struct inode *inode, struct file *file) | |
| { | |
| struct lpfc_debug *debug; | |
| int rc = -ENOMEM; | |
| if (!_dump_buf_dif) | |
| return -EBUSY; | |
| debug = kmalloc(sizeof(*debug), GFP_KERNEL); | |
| if (!debug) | |
| goto out; | |
| /* Round to page boundry */ | |
| printk(KERN_ERR "9060 BLKGRD: %s: _dump_buf_dif=0x%p file=%s\n", | |
| __func__, _dump_buf_dif, file->f_dentry->d_name.name); | |
| debug->buffer = _dump_buf_dif; | |
| if (!debug->buffer) { | |
| kfree(debug); | |
| goto out; | |
| } | |
| debug->len = (1 << _dump_buf_dif_order) << PAGE_SHIFT; | |
| file->private_data = debug; | |
| rc = 0; | |
| out: | |
| return rc; | |
| } | |
| static ssize_t | |
| lpfc_debugfs_dumpDataDif_write(struct file *file, const char __user *buf, | |
| size_t nbytes, loff_t *ppos) | |
| { | |
| /* | |
| * The Data/DIF buffers only save one failing IO | |
| * The write op is used as a reset mechanism after an IO has | |
| * already been saved to the next one can be saved | |
| */ | |
| spin_lock(&_dump_buf_lock); | |
| memset((void *)_dump_buf_data, 0, | |
| ((1 << PAGE_SHIFT) << _dump_buf_data_order)); | |
| memset((void *)_dump_buf_dif, 0, | |
| ((1 << PAGE_SHIFT) << _dump_buf_dif_order)); | |
| _dump_buf_done = 0; | |
| spin_unlock(&_dump_buf_lock); | |
| return nbytes; | |
| } | |
| /** | |
| * lpfc_debugfs_nodelist_open - Open the nodelist debugfs file | |
| * @inode: The inode pointer that contains a vport pointer. | |
| * @file: The file pointer to attach the log output. | |
| * | |
| * Description: | |
| * This routine is the entry point for the debugfs open file operation. It gets | |
| * the vport from the i_private field in @inode, allocates the necessary buffer | |
| * for the log, fills the buffer from the in-memory log for this vport, and then | |
| * returns a pointer to that log in the private_data field in @file. | |
| * | |
| * Returns: | |
| * This function returns zero if successful. On error it will return an negative | |
| * error value. | |
| **/ | |
| static int | |
| lpfc_debugfs_nodelist_open(struct inode *inode, struct file *file) | |
| { | |
| struct lpfc_vport *vport = inode->i_private; | |
| struct lpfc_debug *debug; | |
| int rc = -ENOMEM; | |
| debug = kmalloc(sizeof(*debug), GFP_KERNEL); | |
| if (!debug) | |
| goto out; | |
| /* Round to page boundary */ | |
| debug->buffer = kmalloc(LPFC_NODELIST_SIZE, GFP_KERNEL); | |
| if (!debug->buffer) { | |
| kfree(debug); | |
| goto out; | |
| } | |
| debug->len = lpfc_debugfs_nodelist_data(vport, debug->buffer, | |
| LPFC_NODELIST_SIZE); | |
| file->private_data = debug; | |
| rc = 0; | |
| out: | |
| return rc; | |
| } | |
| /** | |
| * lpfc_debugfs_lseek - Seek through a debugfs file | |
| * @file: The file pointer to seek through. | |
| * @off: The offset to seek to or the amount to seek by. | |
| * @whence: Indicates how to seek. | |
| * | |
| * Description: | |
| * This routine is the entry point for the debugfs lseek file operation. The | |
| * @whence parameter indicates whether @off is the offset to directly seek to, | |
| * or if it is a value to seek forward or reverse by. This function figures out | |
| * what the new offset of the debugfs file will be and assigns that value to the | |
| * f_pos field of @file. | |
| * | |
| * Returns: | |
| * This function returns the new offset if successful and returns a negative | |
| * error if unable to process the seek. | |
| **/ | |
| static loff_t | |
| lpfc_debugfs_lseek(struct file *file, loff_t off, int whence) | |
| { | |
| struct lpfc_debug *debug; | |
| loff_t pos = -1; | |
| debug = file->private_data; | |
| switch (whence) { | |
| case 0: | |
| pos = off; | |
| break; | |
| case 1: | |
| pos = file->f_pos + off; | |
| break; | |
| case 2: | |
| pos = debug->len - off; | |
| } | |
| return (pos < 0 || pos > debug->len) ? -EINVAL : (file->f_pos = pos); | |
| } | |
| /** | |
| * lpfc_debugfs_read - Read a debugfs file | |
| * @file: The file pointer to read from. | |
| * @buf: The buffer to copy the data to. | |
| * @nbytes: The number of bytes to read. | |
| * @ppos: The position in the file to start reading from. | |
| * | |
| * Description: | |
| * This routine reads data from from the buffer indicated in the private_data | |
| * field of @file. It will start reading at @ppos and copy up to @nbytes of | |
| * data to @buf. | |
| * | |
| * Returns: | |
| * This function returns the amount of data that was read (this could be less | |
| * than @nbytes if the end of the file was reached) or a negative error value. | |
| **/ | |
| static ssize_t | |
| lpfc_debugfs_read(struct file *file, char __user *buf, | |
| size_t nbytes, loff_t *ppos) | |
| { | |
| struct lpfc_debug *debug = file->private_data; | |
| return simple_read_from_buffer(buf, nbytes, ppos, debug->buffer, | |
| debug->len); | |
| } | |
| /** | |
| * lpfc_debugfs_release - Release the buffer used to store debugfs file data | |
| * @inode: The inode pointer that contains a vport pointer. (unused) | |
| * @file: The file pointer that contains the buffer to release. | |
| * | |
| * Description: | |
| * This routine frees the buffer that was allocated when the debugfs file was | |
| * opened. | |
| * | |
| * Returns: | |
| * This function returns zero. | |
| **/ | |
| static int | |
| lpfc_debugfs_release(struct inode *inode, struct file *file) | |
| { | |
| struct lpfc_debug *debug = file->private_data; | |
| kfree(debug->buffer); | |
| kfree(debug); | |
| return 0; | |
| } | |
| static int | |
| lpfc_debugfs_dumpDataDif_release(struct inode *inode, struct file *file) | |
| { | |
| struct lpfc_debug *debug = file->private_data; | |
| debug->buffer = NULL; | |
| kfree(debug); | |
| return 0; | |
| } | |
| /* | |
| * iDiag debugfs file access methods | |
| */ | |
| /* | |
| * iDiag PCI config space register access methods: | |
| * | |
| * The PCI config space register accessees of read, write, read-modify-write | |
| * for set bits, and read-modify-write for clear bits to SLI4 PCI functions | |
| * are provided. In the proper SLI4 PCI function's debugfs iDiag directory, | |
| * | |
| * /sys/kernel/debug/lpfc/fn<#>/iDiag | |
| * | |
| * the access is through the debugfs entry pciCfg: | |
| * | |
| * 1. For PCI config space register read access, there are two read methods: | |
| * A) read a single PCI config space register in the size of a byte | |
| * (8 bits), a word (16 bits), or a dword (32 bits); or B) browse through | |
| * the 4K extended PCI config space. | |
| * | |
| * A) Read a single PCI config space register consists of two steps: | |
| * | |
| * Step-1: Set up PCI config space register read command, the command | |
| * syntax is, | |
| * | |
| * echo 1 <where> <count> > pciCfg | |
| * | |
| * where, 1 is the iDiag command for PCI config space read, <where> is the | |
| * offset from the beginning of the device's PCI config space to read from, | |
| * and <count> is the size of PCI config space register data to read back, | |
| * it will be 1 for reading a byte (8 bits), 2 for reading a word (16 bits | |
| * or 2 bytes), or 4 for reading a dword (32 bits or 4 bytes). | |
| * | |
| * Setp-2: Perform the debugfs read operation to execute the idiag command | |
| * set up in Step-1, | |
| * | |
| * cat pciCfg | |
| * | |
| * Examples: | |
| * To read PCI device's vendor-id and device-id from PCI config space, | |
| * | |
| * echo 1 0 4 > pciCfg | |
| * cat pciCfg | |
| * | |
| * To read PCI device's currnt command from config space, | |
| * | |
| * echo 1 4 2 > pciCfg | |
| * cat pciCfg | |
| * | |
| * B) Browse through the entire 4K extended PCI config space also consists | |
| * of two steps: | |
| * | |
| * Step-1: Set up PCI config space register browsing command, the command | |
| * syntax is, | |
| * | |
| * echo 1 0 4096 > pciCfg | |
| * | |
| * where, 1 is the iDiag command for PCI config space read, 0 must be used | |
| * as the offset for PCI config space register browse, and 4096 must be | |
| * used as the count for PCI config space register browse. | |
| * | |
| * Step-2: Repeately issue the debugfs read operation to browse through | |
| * the entire PCI config space registers: | |
| * | |
| * cat pciCfg | |
| * cat pciCfg | |
| * cat pciCfg | |
| * ... | |
| * | |
| * When browsing to the end of the 4K PCI config space, the browse method | |
| * shall wrap around to start reading from beginning again, and again... | |
| * | |
| * 2. For PCI config space register write access, it supports a single PCI | |
| * config space register write in the size of a byte (8 bits), a word | |
| * (16 bits), or a dword (32 bits). The command syntax is, | |
| * | |
| * echo 2 <where> <count> <value> > pciCfg | |
| * | |
| * where, 2 is the iDiag command for PCI config space write, <where> is | |
| * the offset from the beginning of the device's PCI config space to write | |
| * into, <count> is the size of data to write into the PCI config space, | |
| * it will be 1 for writing a byte (8 bits), 2 for writing a word (16 bits | |
| * or 2 bytes), or 4 for writing a dword (32 bits or 4 bytes), and <value> | |
| * is the data to be written into the PCI config space register at the | |
| * offset. | |
| * | |
| * Examples: | |
| * To disable PCI device's interrupt assertion, | |
| * | |
| * 1) Read in device's PCI config space register command field <cmd>: | |
| * | |
| * echo 1 4 2 > pciCfg | |
| * cat pciCfg | |
| * | |
| * 2) Set bit 10 (Interrupt Disable bit) in the <cmd>: | |
| * | |
| * <cmd> = <cmd> | (1 < 10) | |
| * | |
| * 3) Write the modified command back: | |
| * | |
| * echo 2 4 2 <cmd> > pciCfg | |
| * | |
| * 3. For PCI config space register set bits access, it supports a single PCI | |
| * config space register set bits in the size of a byte (8 bits), a word | |
| * (16 bits), or a dword (32 bits). The command syntax is, | |
| * | |
| * echo 3 <where> <count> <bitmask> > pciCfg | |
| * | |
| * where, 3 is the iDiag command for PCI config space set bits, <where> is | |
| * the offset from the beginning of the device's PCI config space to set | |
| * bits into, <count> is the size of the bitmask to set into the PCI config | |
| * space, it will be 1 for setting a byte (8 bits), 2 for setting a word | |
| * (16 bits or 2 bytes), or 4 for setting a dword (32 bits or 4 bytes), and | |
| * <bitmask> is the bitmask, indicating the bits to be set into the PCI | |
| * config space register at the offset. The logic performed to the content | |
| * of the PCI config space register, regval, is, | |
| * | |
| * regval |= <bitmask> | |
| * | |
| * 4. For PCI config space register clear bits access, it supports a single | |
| * PCI config space register clear bits in the size of a byte (8 bits), | |
| * a word (16 bits), or a dword (32 bits). The command syntax is, | |
| * | |
| * echo 4 <where> <count> <bitmask> > pciCfg | |
| * | |
| * where, 4 is the iDiag command for PCI config space clear bits, <where> | |
| * is the offset from the beginning of the device's PCI config space to | |
| * clear bits from, <count> is the size of the bitmask to set into the PCI | |
| * config space, it will be 1 for setting a byte (8 bits), 2 for setting | |
| * a word(16 bits or 2 bytes), or 4 for setting a dword (32 bits or 4 | |
| * bytes), and <bitmask> is the bitmask, indicating the bits to be cleared | |
| * from the PCI config space register at the offset. the logic performed | |
| * to the content of the PCI config space register, regval, is, | |
| * | |
| * regval &= ~<bitmask> | |
| * | |
| * Note, for all single register read, write, set bits, or clear bits access, | |
| * the offset (<where>) must be aligned with the size of the data: | |
| * | |
| * For data size of byte (8 bits), the offset must be aligned to the byte | |
| * boundary; for data size of word (16 bits), the offset must be aligned | |
| * to the word boundary; while for data size of dword (32 bits), the offset | |
| * must be aligned to the dword boundary. Otherwise, the interface will | |
| * return the error: | |
| * | |
| * "-bash: echo: write error: Invalid argument". | |
| * | |
| * For example: | |
| * | |
| * echo 1 2 4 > pciCfg | |
| * -bash: echo: write error: Invalid argument | |
| * | |
| * Note also, all of the numbers in the command fields for all read, write, | |
| * set bits, and clear bits PCI config space register command fields can be | |
| * either decimal or hex. | |
| * | |
| * For example, | |
| * echo 1 0 4096 > pciCfg | |
| * | |
| * will be the same as | |
| * echo 1 0 0x1000 > pciCfg | |
| * | |
| * And, | |
| * echo 2 155 1 10 > pciCfg | |
| * | |
| * will be | |
| * echo 2 0x9b 1 0xa > pciCfg | |
| */ | |
| /** | |
| * lpfc_idiag_cmd_get - Get and parse idiag debugfs comands from user space | |
| * @buf: The pointer to the user space buffer. | |
| * @nbytes: The number of bytes in the user space buffer. | |
| * @idiag_cmd: pointer to the idiag command struct. | |
| * | |
| * This routine reads data from debugfs user space buffer and parses the | |
| * buffer for getting the idiag command and arguments. The while space in | |
| * between the set of data is used as the parsing separator. | |
| * | |
| * This routine returns 0 when successful, it returns proper error code | |
| * back to the user space in error conditions. | |
| */ | |
| static int lpfc_idiag_cmd_get(const char __user *buf, size_t nbytes, | |
| struct lpfc_idiag_cmd *idiag_cmd) | |
| { | |
| char mybuf[64]; | |
| char *pbuf, *step_str; | |
| int bsize, i; | |
| /* Protect copy from user */ | |
| if (!access_ok(VERIFY_READ, buf, nbytes)) | |
| return -EFAULT; | |
| memset(mybuf, 0, sizeof(mybuf)); | |
| memset(idiag_cmd, 0, sizeof(*idiag_cmd)); | |
| bsize = min(nbytes, (sizeof(mybuf)-1)); | |
| if (copy_from_user(mybuf, buf, bsize)) | |
| return -EFAULT; | |
| pbuf = &mybuf[0]; | |
| step_str = strsep(&pbuf, "\t "); | |
| /* The opcode must present */ | |
| if (!step_str) | |
| return -EINVAL; | |
| idiag_cmd->opcode = simple_strtol(step_str, NULL, 0); | |
| if (idiag_cmd->opcode == 0) | |
| return -EINVAL; | |
| for (i = 0; i < LPFC_IDIAG_CMD_DATA_SIZE; i++) { | |
| step_str = strsep(&pbuf, "\t "); | |
| if (!step_str) | |
| return 0; | |
| idiag_cmd->data[i] = simple_strtol(step_str, NULL, 0); | |
| } | |
| return 0; | |
| } | |
| /** | |
| * lpfc_idiag_open - idiag open debugfs | |
| * @inode: The inode pointer that contains a pointer to phba. | |
| * @file: The file pointer to attach the file operation. | |
| * | |
| * Description: | |
| * This routine is the entry point for the debugfs open file operation. It | |
| * gets the reference to phba from the i_private field in @inode, it then | |
| * allocates buffer for the file operation, performs the necessary PCI config | |
| * space read into the allocated buffer according to the idiag user command | |
| * setup, and then returns a pointer to buffer in the private_data field in | |
| * @file. | |
| * | |
| * Returns: | |
| * This function returns zero if successful. On error it will return an | |
| * negative error value. | |
| **/ | |
| static int | |
| lpfc_idiag_open(struct inode *inode, struct file *file) | |
| { | |
| struct lpfc_debug *debug; | |
| debug = kmalloc(sizeof(*debug), GFP_KERNEL); | |
| if (!debug) | |
| return -ENOMEM; | |
| debug->i_private = inode->i_private; | |
| debug->buffer = NULL; | |
| file->private_data = debug; | |
| return 0; | |
| } | |
| /** | |
| * lpfc_idiag_release - Release idiag access file operation | |
| * @inode: The inode pointer that contains a vport pointer. (unused) | |
| * @file: The file pointer that contains the buffer to release. | |
| * | |
| * Description: | |
| * This routine is the generic release routine for the idiag access file | |
| * operation, it frees the buffer that was allocated when the debugfs file | |
| * was opened. | |
| * | |
| * Returns: | |
| * This function returns zero. | |
| **/ | |
| static int | |
| lpfc_idiag_release(struct inode *inode, struct file *file) | |
| { | |
| struct lpfc_debug *debug = file->private_data; | |
| /* Free the buffers to the file operation */ | |
| kfree(debug->buffer); | |
| kfree(debug); | |
| return 0; | |
| } | |
| /** | |
| * lpfc_idiag_cmd_release - Release idiag cmd access file operation | |
| * @inode: The inode pointer that contains a vport pointer. (unused) | |
| * @file: The file pointer that contains the buffer to release. | |
| * | |
| * Description: | |
| * This routine frees the buffer that was allocated when the debugfs file | |
| * was opened. It also reset the fields in the idiag command struct in the | |
| * case the command is not continuous browsing of the data structure. | |
| * | |
| * Returns: | |
| * This function returns zero. | |
| **/ | |
| static int | |
| lpfc_idiag_cmd_release(struct inode *inode, struct file *file) | |
| { | |
| struct lpfc_debug *debug = file->private_data; | |
| /* Read PCI config register, if not read all, clear command fields */ | |
| if ((debug->op == LPFC_IDIAG_OP_RD) && | |
| (idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_RD)) | |
| if ((idiag.cmd.data[1] == sizeof(uint8_t)) || | |
| (idiag.cmd.data[1] == sizeof(uint16_t)) || | |
| (idiag.cmd.data[1] == sizeof(uint32_t))) | |
| memset(&idiag, 0, sizeof(idiag)); | |
| /* Write PCI config register, clear command fields */ | |
| if ((debug->op == LPFC_IDIAG_OP_WR) && | |
| (idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_WR)) | |
| memset(&idiag, 0, sizeof(idiag)); | |
| /* Free the buffers to the file operation */ | |
| kfree(debug->buffer); | |
| kfree(debug); | |
| return 0; | |
| } | |
| /** | |
| * lpfc_idiag_pcicfg_read - idiag debugfs read pcicfg | |
| * @file: The file pointer to read from. | |
| * @buf: The buffer to copy the data to. | |
| * @nbytes: The number of bytes to read. | |
| * @ppos: The position in the file to start reading from. | |
| * | |
| * Description: | |
| * This routine reads data from the @phba pci config space according to the | |
| * idiag command, and copies to user @buf. Depending on the PCI config space | |
| * read command setup, it does either a single register read of a byte | |
| * (8 bits), a word (16 bits), or a dword (32 bits) or browsing through all | |
| * registers from the 4K extended PCI config space. | |
| * | |
| * Returns: | |
| * This function returns the amount of data that was read (this could be less | |
| * than @nbytes if the end of the file was reached) or a negative error value. | |
| **/ | |
| static ssize_t | |
| lpfc_idiag_pcicfg_read(struct file *file, char __user *buf, size_t nbytes, | |
| loff_t *ppos) | |
| { | |
| struct lpfc_debug *debug = file->private_data; | |
| struct lpfc_hba *phba = (struct lpfc_hba *)debug->i_private; | |
| int offset_label, offset, len = 0, index = LPFC_PCI_CFG_RD_SIZE; | |
| int where, count; | |
| char *pbuffer; | |
| struct pci_dev *pdev; | |
| uint32_t u32val; | |
| uint16_t u16val; | |
| uint8_t u8val; | |
| pdev = phba->pcidev; | |
| if (!pdev) | |
| return 0; | |
| /* This is a user read operation */ | |
| debug->op = LPFC_IDIAG_OP_RD; | |
| if (!debug->buffer) | |
| debug->buffer = kmalloc(LPFC_PCI_CFG_SIZE, GFP_KERNEL); | |
| if (!debug->buffer) | |
| return 0; | |
| pbuffer = debug->buffer; | |
| if (*ppos) | |
| return 0; | |
| if (idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_RD) { | |
| where = idiag.cmd.data[0]; | |
| count = idiag.cmd.data[1]; | |
| } else | |
| return 0; | |
| /* Read single PCI config space register */ | |
| switch (count) { | |
| case SIZE_U8: /* byte (8 bits) */ | |
| pci_read_config_byte(pdev, where, &u8val); | |
| len += snprintf(pbuffer+len, LPFC_PCI_CFG_SIZE-len, | |
| "%03x: %02x\n", where, u8val); | |
| break; | |
| case SIZE_U16: /* word (16 bits) */ | |
| pci_read_config_word(pdev, where, &u16val); | |
| len += snprintf(pbuffer+len, LPFC_PCI_CFG_SIZE-len, | |
| "%03x: %04x\n", where, u16val); | |
| break; | |
| case SIZE_U32: /* double word (32 bits) */ | |
| pci_read_config_dword(pdev, where, &u32val); | |
| len += snprintf(pbuffer+len, LPFC_PCI_CFG_SIZE-len, | |
| "%03x: %08x\n", where, u32val); | |
| break; | |
| case LPFC_PCI_CFG_SIZE: /* browse all */ | |
| goto pcicfg_browse; | |
| break; | |
| default: | |
| /* illegal count */ | |
| len = 0; | |
| break; | |
| } | |
| return simple_read_from_buffer(buf, nbytes, ppos, pbuffer, len); | |
| pcicfg_browse: | |
| /* Browse all PCI config space registers */ | |
| offset_label = idiag.offset.last_rd; | |
| offset = offset_label; | |
| /* Read PCI config space */ | |
| len += snprintf(pbuffer+len, LPFC_PCI_CFG_SIZE-len, | |
| "%03x: ", offset_label); | |
| while (index > 0) { | |
| pci_read_config_dword(pdev, offset, &u32val); | |
| len += snprintf(pbuffer+len, LPFC_PCI_CFG_SIZE-len, | |
| "%08x ", u32val); | |
| offset += sizeof(uint32_t); | |
| index -= sizeof(uint32_t); | |
| if (!index) | |
| len += snprintf(pbuffer+len, LPFC_PCI_CFG_SIZE-len, | |
| "\n"); | |
| else if (!(index % (8 * sizeof(uint32_t)))) { | |
| offset_label += (8 * sizeof(uint32_t)); | |
| len += snprintf(pbuffer+len, LPFC_PCI_CFG_SIZE-len, | |
| "\n%03x: ", offset_label); | |
| } | |
| } | |
| /* Set up the offset for next portion of pci cfg read */ | |
| idiag.offset.last_rd += LPFC_PCI_CFG_RD_SIZE; | |
| if (idiag.offset.last_rd >= LPFC_PCI_CFG_SIZE) | |
| idiag.offset.last_rd = 0; | |
| return simple_read_from_buffer(buf, nbytes, ppos, pbuffer, len); | |
| } | |
| /** | |
| * lpfc_idiag_pcicfg_write - Syntax check and set up idiag pcicfg commands | |
| * @file: The file pointer to read from. | |
| * @buf: The buffer to copy the user data from. | |
| * @nbytes: The number of bytes to get. | |
| * @ppos: The position in the file to start reading from. | |
| * | |
| * This routine get the debugfs idiag command struct from user space and | |
| * then perform the syntax check for PCI config space read or write command | |
| * accordingly. In the case of PCI config space read command, it sets up | |
| * the command in the idiag command struct for the debugfs read operation. | |
| * In the case of PCI config space write operation, it executes the write | |
| * operation into the PCI config space accordingly. | |
| * | |
| * It returns the @nbytges passing in from debugfs user space when successful. | |
| * In case of error conditions, it returns proper error code back to the user | |
| * space. | |
| */ | |
| static ssize_t | |
| lpfc_idiag_pcicfg_write(struct file *file, const char __user *buf, | |
| size_t nbytes, loff_t *ppos) | |
| { | |
| struct lpfc_debug *debug = file->private_data; | |
| struct lpfc_hba *phba = (struct lpfc_hba *)debug->i_private; | |
| uint32_t where, value, count; | |
| uint32_t u32val; | |
| uint16_t u16val; | |
| uint8_t u8val; | |
| struct pci_dev *pdev; | |
| int rc; | |
| pdev = phba->pcidev; | |
| if (!pdev) | |
| return -EFAULT; | |
| /* This is a user write operation */ | |
| debug->op = LPFC_IDIAG_OP_WR; | |
| rc = lpfc_idiag_cmd_get(buf, nbytes, &idiag.cmd); | |
| if (rc) | |
| return rc; | |
| if (idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_RD) { | |
| /* Read command from PCI config space, set up command fields */ | |
| where = idiag.cmd.data[0]; | |
| count = idiag.cmd.data[1]; | |
| if (count == LPFC_PCI_CFG_SIZE) { | |
| if (where != 0) | |
| goto error_out; | |
| } else if ((count != sizeof(uint8_t)) && | |
| (count != sizeof(uint16_t)) && | |
| (count != sizeof(uint32_t))) | |
| goto error_out; | |
| if (count == sizeof(uint8_t)) { | |
| if (where > LPFC_PCI_CFG_SIZE - sizeof(uint8_t)) | |
| goto error_out; | |
| if (where % sizeof(uint8_t)) | |
| goto error_out; | |
| } | |
| if (count == sizeof(uint16_t)) { | |
| if (where > LPFC_PCI_CFG_SIZE - sizeof(uint16_t)) | |
| goto error_out; | |
| if (where % sizeof(uint16_t)) | |
| goto error_out; | |
| } | |
| if (count == sizeof(uint32_t)) { | |
| if (where > LPFC_PCI_CFG_SIZE - sizeof(uint32_t)) | |
| goto error_out; | |
| if (where % sizeof(uint32_t)) | |
| goto error_out; | |
| } | |
| } else if (idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_WR || | |
| idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_ST || | |
| idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_CL) { | |
| /* Write command to PCI config space, read-modify-write */ | |
| where = idiag.cmd.data[0]; | |
| count = idiag.cmd.data[1]; | |
| value = idiag.cmd.data[2]; | |
| /* Sanity checks */ | |
| if ((count != sizeof(uint8_t)) && | |
| (count != sizeof(uint16_t)) && | |
| (count != sizeof(uint32_t))) | |
| goto error_out; | |
| if (count == sizeof(uint8_t)) { | |
| if (where > LPFC_PCI_CFG_SIZE - sizeof(uint8_t)) | |
| goto error_out; | |
| if (where % sizeof(uint8_t)) | |
| goto error_out; | |
| if (idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_WR) | |
| pci_write_config_byte(pdev, where, | |
| (uint8_t)value); | |
| if (idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_ST) { | |
| rc = pci_read_config_byte(pdev, where, &u8val); | |
| if (!rc) { | |
| u8val |= (uint8_t)value; | |
| pci_write_config_byte(pdev, where, | |
| u8val); | |
| } | |
| } | |
| if (idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_CL) { | |
| rc = pci_read_config_byte(pdev, where, &u8val); | |
| if (!rc) { | |
| u8val &= (uint8_t)(~value); | |
| pci_write_config_byte(pdev, where, | |
| u8val); | |
| } | |
| } | |
| } | |
| if (count == sizeof(uint16_t)) { | |
| if (where > LPFC_PCI_CFG_SIZE - sizeof(uint16_t)) | |
| goto error_out; | |
| if (where % sizeof(uint16_t)) | |
| goto error_out; | |
| if (idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_WR) | |
| pci_write_config_word(pdev, where, | |
| (uint16_t)value); | |
| if (idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_ST) { | |
| rc = pci_read_config_word(pdev, where, &u16val); | |
| if (!rc) { | |
| u16val |= (uint16_t)value; | |
| pci_write_config_word(pdev, where, | |
| u16val); | |
| } | |
| } | |
| if (idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_CL) { | |
| rc = pci_read_config_word(pdev, where, &u16val); | |
| if (!rc) { | |
| u16val &= (uint16_t)(~value); | |
| pci_write_config_word(pdev, where, | |
| u16val); | |
| } | |
| } | |
| } | |
| if (count == sizeof(uint32_t)) { | |
| if (where > LPFC_PCI_CFG_SIZE - sizeof(uint32_t)) | |
| goto error_out; | |
| if (where % sizeof(uint32_t)) | |
| goto error_out; | |
| if (idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_WR) | |
| pci_write_config_dword(pdev, where, value); | |
| if (idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_ST) { | |
| rc = pci_read_config_dword(pdev, where, | |
| &u32val); | |
| if (!rc) { | |
| u32val |= value; | |
| pci_write_config_dword(pdev, where, | |
| u32val); | |
| } | |
| } | |
| if (idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_CL) { | |
| rc = pci_read_config_dword(pdev, where, | |
| &u32val); | |
| if (!rc) { | |
| u32val &= ~value; | |
| pci_write_config_dword(pdev, where, | |
| u32val); | |
| } | |
| } | |
| } | |
| } else | |
| /* All other opecodes are illegal for now */ | |
| goto error_out; | |
| return nbytes; | |
| error_out: | |
| memset(&idiag, 0, sizeof(idiag)); | |
| return -EINVAL; | |
| } | |
| /** | |
| * lpfc_idiag_queinfo_read - idiag debugfs read queue information | |
| * @file: The file pointer to read from. | |
| * @buf: The buffer to copy the data to. | |
| * @nbytes: The number of bytes to read. | |
| * @ppos: The position in the file to start reading from. | |
| * | |
| * Description: | |
| * This routine reads data from the @phba SLI4 PCI function queue information, | |
| * and copies to user @buf. | |
| * | |
| * Returns: | |
| * This function returns the amount of data that was read (this could be less | |
| * than @nbytes if the end of the file was reached) or a negative error value. | |
| **/ | |
| static ssize_t | |
| lpfc_idiag_queinfo_read(struct file *file, char __user *buf, size_t nbytes, | |
| loff_t *ppos) | |
| { | |
| struct lpfc_debug *debug = file->private_data; | |
| struct lpfc_hba *phba = (struct lpfc_hba *)debug->i_private; | |
| int len = 0, fcp_qidx; | |
| char *pbuffer; | |
| if (!debug->buffer) | |
| debug->buffer = kmalloc(LPFC_QUE_INFO_GET_BUF_SIZE, GFP_KERNEL); | |
| if (!debug->buffer) | |
| return 0; | |
| pbuffer = debug->buffer; | |
| if (*ppos) | |
| return 0; | |
| /* Get slow-path event queue information */ | |
| len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len, | |
| "Slow-path EQ information:\n"); | |
| len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len, | |
| "\tID [%02d], EQE-COUNT [%04d], " | |
| "HOST-INDEX [%04x], PORT-INDEX [%04x]\n\n", | |
| phba->sli4_hba.sp_eq->queue_id, | |
| phba->sli4_hba.sp_eq->entry_count, | |
| phba->sli4_hba.sp_eq->host_index, | |
| phba->sli4_hba.sp_eq->hba_index); | |
| /* Get fast-path event queue information */ | |
| len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len, | |
| "Fast-path EQ information:\n"); | |
| for (fcp_qidx = 0; fcp_qidx < phba->cfg_fcp_eq_count; fcp_qidx++) { | |
| len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len, | |
| "\tID [%02d], EQE-COUNT [%04d], " | |
| "HOST-INDEX [%04x], PORT-INDEX [%04x]\n", | |
| phba->sli4_hba.fp_eq[fcp_qidx]->queue_id, | |
| phba->sli4_hba.fp_eq[fcp_qidx]->entry_count, | |
| phba->sli4_hba.fp_eq[fcp_qidx]->host_index, | |
| phba->sli4_hba.fp_eq[fcp_qidx]->hba_index); | |
| } | |
| len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len, "\n"); | |
| /* Get mailbox complete queue information */ | |
| len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len, | |
| "Mailbox CQ information:\n"); | |
| len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len, | |
| "\t\tAssociated EQ-ID [%02d]:\n", | |
| phba->sli4_hba.mbx_cq->assoc_qid); | |
| len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len, | |
| "\tID [%02d], CQE-COUNT [%04d], " | |
| "HOST-INDEX [%04x], PORT-INDEX [%04x]\n\n", | |
| phba->sli4_hba.mbx_cq->queue_id, | |
| phba->sli4_hba.mbx_cq->entry_count, | |
| phba->sli4_hba.mbx_cq->host_index, | |
| phba->sli4_hba.mbx_cq->hba_index); | |
| /* Get slow-path complete queue information */ | |
| len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len, | |
| "Slow-path CQ information:\n"); | |
| len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len, | |
| "\t\tAssociated EQ-ID [%02d]:\n", | |
| phba->sli4_hba.els_cq->assoc_qid); | |
| len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len, | |
| "\tID [%02d], CQE-COUNT [%04d], " | |
| "HOST-INDEX [%04x], PORT-INDEX [%04x]\n\n", | |
| phba->sli4_hba.els_cq->queue_id, | |
| phba->sli4_hba.els_cq->entry_count, | |
| phba->sli4_hba.els_cq->host_index, | |
| phba->sli4_hba.els_cq->hba_index); | |
| /* Get fast-path complete queue information */ | |
| len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len, | |
| "Fast-path CQ information:\n"); | |
| for (fcp_qidx = 0; fcp_qidx < phba->cfg_fcp_eq_count; fcp_qidx++) { | |
| len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len, | |
| "\t\tAssociated EQ-ID [%02d]:\n", | |
| phba->sli4_hba.fcp_cq[fcp_qidx]->assoc_qid); | |
| len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len, | |
| "\tID [%02d], EQE-COUNT [%04d], " | |
| "HOST-INDEX [%04x], PORT-INDEX [%04x]\n", | |
| phba->sli4_hba.fcp_cq[fcp_qidx]->queue_id, | |
| phba->sli4_hba.fcp_cq[fcp_qidx]->entry_count, | |
| phba->sli4_hba.fcp_cq[fcp_qidx]->host_index, | |
| phba->sli4_hba.fcp_cq[fcp_qidx]->hba_index); | |
| } | |
| len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len, "\n"); | |
| /* Get mailbox queue information */ | |
| len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len, | |
| "Mailbox MQ information:\n"); | |
| len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len, | |
| "\t\tAssociated CQ-ID [%02d]:\n", | |
| phba->sli4_hba.mbx_wq->assoc_qid); | |
| len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len, | |
| "\tID [%02d], MQE-COUNT [%04d], " | |
| "HOST-INDEX [%04x], PORT-INDEX [%04x]\n\n", | |
| phba->sli4_hba.mbx_wq->queue_id, | |
| phba->sli4_hba.mbx_wq->entry_count, | |
| phba->sli4_hba.mbx_wq->host_index, | |
| phba->sli4_hba.mbx_wq->hba_index); | |
| /* Get slow-path work queue information */ | |
| len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len, | |
| "Slow-path WQ information:\n"); | |
| len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len, | |
| "\t\tAssociated CQ-ID [%02d]:\n", | |
| phba->sli4_hba.els_wq->assoc_qid); | |
| len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len, | |
| "\tID [%02d], WQE-COUNT [%04d], " | |
| "HOST-INDEX [%04x], PORT-INDEX [%04x]\n\n", | |
| phba->sli4_hba.els_wq->queue_id, | |
| phba->sli4_hba.els_wq->entry_count, | |
| phba->sli4_hba.els_wq->host_index, | |
| phba->sli4_hba.els_wq->hba_index); | |
| /* Get fast-path work queue information */ | |
| len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len, | |
| "Fast-path WQ information:\n"); | |
| for (fcp_qidx = 0; fcp_qidx < phba->cfg_fcp_wq_count; fcp_qidx++) { | |
| len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len, | |
| "\t\tAssociated CQ-ID [%02d]:\n", | |
| phba->sli4_hba.fcp_wq[fcp_qidx]->assoc_qid); | |
| len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len, | |
| "\tID [%02d], WQE-COUNT [%04d], " | |
| "HOST-INDEX [%04x], PORT-INDEX [%04x]\n", | |
| phba->sli4_hba.fcp_wq[fcp_qidx]->queue_id, | |
| phba->sli4_hba.fcp_wq[fcp_qidx]->entry_count, | |
| phba->sli4_hba.fcp_wq[fcp_qidx]->host_index, | |
| phba->sli4_hba.fcp_wq[fcp_qidx]->hba_index); | |
| } | |
| len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len, "\n"); | |
| /* Get receive queue information */ | |
| len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len, | |
| "Slow-path RQ information:\n"); | |
| len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len, | |
| "\t\tAssociated CQ-ID [%02d]:\n", | |
| phba->sli4_hba.hdr_rq->assoc_qid); | |
| len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len, | |
| "\tID [%02d], RHQE-COUNT [%04d], " | |
| "HOST-INDEX [%04x], PORT-INDEX [%04x]\n", | |
| phba->sli4_hba.hdr_rq->queue_id, | |
| phba->sli4_hba.hdr_rq->entry_count, | |
| phba->sli4_hba.hdr_rq->host_index, | |
| phba->sli4_hba.hdr_rq->hba_index); | |
| len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len, | |
| "\tID [%02d], RDQE-COUNT [%04d], " | |
| "HOST-INDEX [%04x], PORT-INDEX [%04x]\n", | |
| phba->sli4_hba.dat_rq->queue_id, | |
| phba->sli4_hba.dat_rq->entry_count, | |
| phba->sli4_hba.dat_rq->host_index, | |
| phba->sli4_hba.dat_rq->hba_index); | |
| return simple_read_from_buffer(buf, nbytes, ppos, pbuffer, len); | |
| } | |
| #undef lpfc_debugfs_op_disc_trc | |
| static const struct file_operations lpfc_debugfs_op_disc_trc = { | |
| .owner = THIS_MODULE, | |
| .open = lpfc_debugfs_disc_trc_open, | |
| .llseek = lpfc_debugfs_lseek, | |
| .read = lpfc_debugfs_read, | |
| .release = lpfc_debugfs_release, | |
| }; | |
| #undef lpfc_debugfs_op_nodelist | |
| static const struct file_operations lpfc_debugfs_op_nodelist = { | |
| .owner = THIS_MODULE, | |
| .open = lpfc_debugfs_nodelist_open, | |
| .llseek = lpfc_debugfs_lseek, | |
| .read = lpfc_debugfs_read, | |
| .release = lpfc_debugfs_release, | |
| }; | |
| #undef lpfc_debugfs_op_hbqinfo | |
| static const struct file_operations lpfc_debugfs_op_hbqinfo = { | |
| .owner = THIS_MODULE, | |
| .open = lpfc_debugfs_hbqinfo_open, | |
| .llseek = lpfc_debugfs_lseek, | |
| .read = lpfc_debugfs_read, | |
| .release = lpfc_debugfs_release, | |
| }; | |
| #undef lpfc_debugfs_op_dumpHBASlim | |
| static const struct file_operations lpfc_debugfs_op_dumpHBASlim = { | |
| .owner = THIS_MODULE, | |
| .open = lpfc_debugfs_dumpHBASlim_open, | |
| .llseek = lpfc_debugfs_lseek, | |
| .read = lpfc_debugfs_read, | |
| .release = lpfc_debugfs_release, | |
| }; | |
| #undef lpfc_debugfs_op_dumpHostSlim | |
| static const struct file_operations lpfc_debugfs_op_dumpHostSlim = { | |
| .owner = THIS_MODULE, | |
| .open = lpfc_debugfs_dumpHostSlim_open, | |
| .llseek = lpfc_debugfs_lseek, | |
| .read = lpfc_debugfs_read, | |
| .release = lpfc_debugfs_release, | |
| }; | |
| #undef lpfc_debugfs_op_dumpData | |
| static const struct file_operations lpfc_debugfs_op_dumpData = { | |
| .owner = THIS_MODULE, | |
| .open = lpfc_debugfs_dumpData_open, | |
| .llseek = lpfc_debugfs_lseek, | |
| .read = lpfc_debugfs_read, | |
| .write = lpfc_debugfs_dumpDataDif_write, | |
| .release = lpfc_debugfs_dumpDataDif_release, | |
| }; | |
| #undef lpfc_debugfs_op_dumpDif | |
| static const struct file_operations lpfc_debugfs_op_dumpDif = { | |
| .owner = THIS_MODULE, | |
| .open = lpfc_debugfs_dumpDif_open, | |
| .llseek = lpfc_debugfs_lseek, | |
| .read = lpfc_debugfs_read, | |
| .write = lpfc_debugfs_dumpDataDif_write, | |
| .release = lpfc_debugfs_dumpDataDif_release, | |
| }; | |
| #undef lpfc_debugfs_op_slow_ring_trc | |
| static const struct file_operations lpfc_debugfs_op_slow_ring_trc = { | |
| .owner = THIS_MODULE, | |
| .open = lpfc_debugfs_slow_ring_trc_open, | |
| .llseek = lpfc_debugfs_lseek, | |
| .read = lpfc_debugfs_read, | |
| .release = lpfc_debugfs_release, | |
| }; | |
| static struct dentry *lpfc_debugfs_root = NULL; | |
| static atomic_t lpfc_debugfs_hba_count; | |
| /* | |
| * File operations for the iDiag debugfs | |
| */ | |
| #undef lpfc_idiag_op_pciCfg | |
| static const struct file_operations lpfc_idiag_op_pciCfg = { | |
| .owner = THIS_MODULE, | |
| .open = lpfc_idiag_open, | |
| .llseek = lpfc_debugfs_lseek, | |
| .read = lpfc_idiag_pcicfg_read, | |
| .write = lpfc_idiag_pcicfg_write, | |
| .release = lpfc_idiag_cmd_release, | |
| }; | |
| #undef lpfc_idiag_op_queInfo | |
| static const struct file_operations lpfc_idiag_op_queInfo = { | |
| .owner = THIS_MODULE, | |
| .open = lpfc_idiag_open, | |
| .read = lpfc_idiag_queinfo_read, | |
| .release = lpfc_idiag_release, | |
| }; | |
| #endif | |
| /** | |
| * lpfc_debugfs_initialize - Initialize debugfs for a vport | |
| * @vport: The vport pointer to initialize. | |
| * | |
| * Description: | |
| * When Debugfs is configured this routine sets up the lpfc debugfs file system. | |
| * If not already created, this routine will create the lpfc directory, and | |
| * lpfcX directory (for this HBA), and vportX directory for this vport. It will | |
| * also create each file used to access lpfc specific debugfs information. | |
| **/ | |
| inline void | |
| lpfc_debugfs_initialize(struct lpfc_vport *vport) | |
| { | |
| #ifdef CONFIG_SCSI_LPFC_DEBUG_FS | |
| struct lpfc_hba *phba = vport->phba; | |
| char name[64]; | |
| uint32_t num, i; | |
| if (!lpfc_debugfs_enable) | |
| return; | |
| /* Setup lpfc root directory */ | |
| if (!lpfc_debugfs_root) { | |
| lpfc_debugfs_root = debugfs_create_dir("lpfc", NULL); | |
| atomic_set(&lpfc_debugfs_hba_count, 0); | |
| if (!lpfc_debugfs_root) { | |
| lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, | |
| "0408 Cannot create debugfs root\n"); | |
| goto debug_failed; | |
| } | |
| } | |
| if (!lpfc_debugfs_start_time) | |
| lpfc_debugfs_start_time = jiffies; | |
| /* Setup funcX directory for specific HBA PCI function */ | |
| snprintf(name, sizeof(name), "fn%d", phba->brd_no); | |
| if (!phba->hba_debugfs_root) { | |
| phba->hba_debugfs_root = | |
| debugfs_create_dir(name, lpfc_debugfs_root); | |
| if (!phba->hba_debugfs_root) { | |
| lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, | |
| "0412 Cannot create debugfs hba\n"); | |
| goto debug_failed; | |
| } | |
| atomic_inc(&lpfc_debugfs_hba_count); | |
| atomic_set(&phba->debugfs_vport_count, 0); | |
| /* Setup hbqinfo */ | |
| snprintf(name, sizeof(name), "hbqinfo"); | |
| phba->debug_hbqinfo = | |
| debugfs_create_file(name, S_IFREG|S_IRUGO|S_IWUSR, | |
| phba->hba_debugfs_root, | |
| phba, &lpfc_debugfs_op_hbqinfo); | |
| if (!phba->debug_hbqinfo) { | |
| lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, | |
| "0411 Cannot create debugfs hbqinfo\n"); | |
| goto debug_failed; | |
| } | |
| /* Setup dumpHBASlim */ | |
| if (phba->sli_rev < LPFC_SLI_REV4) { | |
| snprintf(name, sizeof(name), "dumpHBASlim"); | |
| phba->debug_dumpHBASlim = | |
| debugfs_create_file(name, | |
| S_IFREG|S_IRUGO|S_IWUSR, | |
| phba->hba_debugfs_root, | |
| phba, &lpfc_debugfs_op_dumpHBASlim); | |
| if (!phba->debug_dumpHBASlim) { | |
| lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, | |
| "0413 Cannot create debugfs " | |
| "dumpHBASlim\n"); | |
| goto debug_failed; | |
| } | |
| } else | |
| phba->debug_dumpHBASlim = NULL; | |
| /* Setup dumpHostSlim */ | |
| if (phba->sli_rev < LPFC_SLI_REV4) { | |
| snprintf(name, sizeof(name), "dumpHostSlim"); | |
| phba->debug_dumpHostSlim = | |
| debugfs_create_file(name, | |
| S_IFREG|S_IRUGO|S_IWUSR, | |
| phba->hba_debugfs_root, | |
| phba, &lpfc_debugfs_op_dumpHostSlim); | |
| if (!phba->debug_dumpHostSlim) { | |
| lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, | |
| "0414 Cannot create debugfs " | |
| "dumpHostSlim\n"); | |
| goto debug_failed; | |
| } | |
| } else | |
| phba->debug_dumpHBASlim = NULL; | |
| /* Setup dumpData */ | |
| snprintf(name, sizeof(name), "dumpData"); | |
| phba->debug_dumpData = | |
| debugfs_create_file(name, S_IFREG|S_IRUGO|S_IWUSR, | |
| phba->hba_debugfs_root, | |
| phba, &lpfc_debugfs_op_dumpData); | |
| if (!phba->debug_dumpData) { | |
| lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, | |
| "0800 Cannot create debugfs dumpData\n"); | |
| goto debug_failed; | |
| } | |
| /* Setup dumpDif */ | |
| snprintf(name, sizeof(name), "dumpDif"); | |
| phba->debug_dumpDif = | |
| debugfs_create_file(name, S_IFREG|S_IRUGO|S_IWUSR, | |
| phba->hba_debugfs_root, | |
| phba, &lpfc_debugfs_op_dumpDif); | |
| if (!phba->debug_dumpDif) { | |
| lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, | |
| "0801 Cannot create debugfs dumpDif\n"); | |
| goto debug_failed; | |
| } | |
| /* Setup slow ring trace */ | |
| if (lpfc_debugfs_max_slow_ring_trc) { | |
| num = lpfc_debugfs_max_slow_ring_trc - 1; | |
| if (num & lpfc_debugfs_max_slow_ring_trc) { | |
| /* Change to be a power of 2 */ | |
| num = lpfc_debugfs_max_slow_ring_trc; | |
| i = 0; | |
| while (num > 1) { | |
| num = num >> 1; | |
| i++; | |
| } | |
| lpfc_debugfs_max_slow_ring_trc = (1 << i); | |
| printk(KERN_ERR | |
| "lpfc_debugfs_max_disc_trc changed to " | |
| "%d\n", lpfc_debugfs_max_disc_trc); | |
| } | |
| } | |
| snprintf(name, sizeof(name), "slow_ring_trace"); | |
| phba->debug_slow_ring_trc = | |
| debugfs_create_file(name, S_IFREG|S_IRUGO|S_IWUSR, | |
| phba->hba_debugfs_root, | |
| phba, &lpfc_debugfs_op_slow_ring_trc); | |
| if (!phba->debug_slow_ring_trc) { | |
| lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, | |
| "0415 Cannot create debugfs " | |
| "slow_ring_trace\n"); | |
| goto debug_failed; | |
| } | |
| if (!phba->slow_ring_trc) { | |
| phba->slow_ring_trc = kmalloc( | |
| (sizeof(struct lpfc_debugfs_trc) * | |
| lpfc_debugfs_max_slow_ring_trc), | |
| GFP_KERNEL); | |
| if (!phba->slow_ring_trc) { | |
| lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, | |
| "0416 Cannot create debugfs " | |
| "slow_ring buffer\n"); | |
| goto debug_failed; | |
| } | |
| atomic_set(&phba->slow_ring_trc_cnt, 0); | |
| memset(phba->slow_ring_trc, 0, | |
| (sizeof(struct lpfc_debugfs_trc) * | |
| lpfc_debugfs_max_slow_ring_trc)); | |
| } | |
| } | |
| snprintf(name, sizeof(name), "vport%d", vport->vpi); | |
| if (!vport->vport_debugfs_root) { | |
| vport->vport_debugfs_root = | |
| debugfs_create_dir(name, phba->hba_debugfs_root); | |
| if (!vport->vport_debugfs_root) { | |
| lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, | |
| "0417 Cant create debugfs\n"); | |
| goto debug_failed; | |
| } | |
| atomic_inc(&phba->debugfs_vport_count); | |
| } | |
| if (lpfc_debugfs_max_disc_trc) { | |
| num = lpfc_debugfs_max_disc_trc - 1; | |
| if (num & lpfc_debugfs_max_disc_trc) { | |
| /* Change to be a power of 2 */ | |
| num = lpfc_debugfs_max_disc_trc; | |
| i = 0; | |
| while (num > 1) { | |
| num = num >> 1; | |
| i++; | |
| } | |
| lpfc_debugfs_max_disc_trc = (1 << i); | |
| printk(KERN_ERR | |
| "lpfc_debugfs_max_disc_trc changed to %d\n", | |
| lpfc_debugfs_max_disc_trc); | |
| } | |
| } | |
| vport->disc_trc = kzalloc( | |
| (sizeof(struct lpfc_debugfs_trc) * lpfc_debugfs_max_disc_trc), | |
| GFP_KERNEL); | |
| if (!vport->disc_trc) { | |
| lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, | |
| "0418 Cannot create debugfs disc trace " | |
| "buffer\n"); | |
| goto debug_failed; | |
| } | |
| atomic_set(&vport->disc_trc_cnt, 0); | |
| snprintf(name, sizeof(name), "discovery_trace"); | |
| vport->debug_disc_trc = | |
| debugfs_create_file(name, S_IFREG|S_IRUGO|S_IWUSR, | |
| vport->vport_debugfs_root, | |
| vport, &lpfc_debugfs_op_disc_trc); | |
| if (!vport->debug_disc_trc) { | |
| lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, | |
| "0419 Cannot create debugfs " | |
| "discovery_trace\n"); | |
| goto debug_failed; | |
| } | |
| snprintf(name, sizeof(name), "nodelist"); | |
| vport->debug_nodelist = | |
| debugfs_create_file(name, S_IFREG|S_IRUGO|S_IWUSR, | |
| vport->vport_debugfs_root, | |
| vport, &lpfc_debugfs_op_nodelist); | |
| if (!vport->debug_nodelist) { | |
| lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, | |
| "0409 Cant create debugfs nodelist\n"); | |
| goto debug_failed; | |
| } | |
| /* | |
| * iDiag debugfs root entry points for SLI4 device only | |
| */ | |
| if (phba->sli_rev < LPFC_SLI_REV4) | |
| goto debug_failed; | |
| snprintf(name, sizeof(name), "iDiag"); | |
| if (!phba->idiag_root) { | |
| phba->idiag_root = | |
| debugfs_create_dir(name, phba->hba_debugfs_root); | |
| if (!phba->idiag_root) { | |
| lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, | |
| "2922 Can't create idiag debugfs\n"); | |
| goto debug_failed; | |
| } | |
| /* Initialize iDiag data structure */ | |
| memset(&idiag, 0, sizeof(idiag)); | |
| } | |
| /* iDiag read PCI config space */ | |
| snprintf(name, sizeof(name), "pciCfg"); | |
| if (!phba->idiag_pci_cfg) { | |
| phba->idiag_pci_cfg = | |
| debugfs_create_file(name, S_IFREG|S_IRUGO|S_IWUSR, | |
| phba->idiag_root, phba, &lpfc_idiag_op_pciCfg); | |
| if (!phba->idiag_pci_cfg) { | |
| lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, | |
| "2923 Can't create idiag debugfs\n"); | |
| goto debug_failed; | |
| } | |
| idiag.offset.last_rd = 0; | |
| } | |
| /* iDiag get PCI function queue information */ | |
| snprintf(name, sizeof(name), "queInfo"); | |
| if (!phba->idiag_que_info) { | |
| phba->idiag_que_info = | |
| debugfs_create_file(name, S_IFREG|S_IRUGO, | |
| phba->idiag_root, phba, &lpfc_idiag_op_queInfo); | |
| if (!phba->idiag_que_info) { | |
| lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, | |
| "2924 Can't create idiag debugfs\n"); | |
| goto debug_failed; | |
| } | |
| } | |
| debug_failed: | |
| return; | |
| #endif | |
| } | |
| /** | |
| * lpfc_debugfs_terminate - Tear down debugfs infrastructure for this vport | |
| * @vport: The vport pointer to remove from debugfs. | |
| * | |
| * Description: | |
| * When Debugfs is configured this routine removes debugfs file system elements | |
| * that are specific to this vport. It also checks to see if there are any | |
| * users left for the debugfs directories associated with the HBA and driver. If | |
| * this is the last user of the HBA directory or driver directory then it will | |
| * remove those from the debugfs infrastructure as well. | |
| **/ | |
| inline void | |
| lpfc_debugfs_terminate(struct lpfc_vport *vport) | |
| { | |
| #ifdef CONFIG_SCSI_LPFC_DEBUG_FS | |
| struct lpfc_hba *phba = vport->phba; | |
| if (vport->disc_trc) { | |
| kfree(vport->disc_trc); | |
| vport->disc_trc = NULL; | |
| } | |
| if (vport->debug_disc_trc) { | |
| debugfs_remove(vport->debug_disc_trc); /* discovery_trace */ | |
| vport->debug_disc_trc = NULL; | |
| } | |
| if (vport->debug_nodelist) { | |
| debugfs_remove(vport->debug_nodelist); /* nodelist */ | |
| vport->debug_nodelist = NULL; | |
| } | |
| if (vport->vport_debugfs_root) { | |
| debugfs_remove(vport->vport_debugfs_root); /* vportX */ | |
| vport->vport_debugfs_root = NULL; | |
| atomic_dec(&phba->debugfs_vport_count); | |
| } | |
| if (atomic_read(&phba->debugfs_vport_count) == 0) { | |
| if (phba->debug_hbqinfo) { | |
| debugfs_remove(phba->debug_hbqinfo); /* hbqinfo */ | |
| phba->debug_hbqinfo = NULL; | |
| } | |
| if (phba->debug_dumpHBASlim) { | |
| debugfs_remove(phba->debug_dumpHBASlim); /* HBASlim */ | |
| phba->debug_dumpHBASlim = NULL; | |
| } | |
| if (phba->debug_dumpHostSlim) { | |
| debugfs_remove(phba->debug_dumpHostSlim); /* HostSlim */ | |
| phba->debug_dumpHostSlim = NULL; | |
| } | |
| if (phba->debug_dumpData) { | |
| debugfs_remove(phba->debug_dumpData); /* dumpData */ | |
| phba->debug_dumpData = NULL; | |
| } | |
| if (phba->debug_dumpDif) { | |
| debugfs_remove(phba->debug_dumpDif); /* dumpDif */ | |
| phba->debug_dumpDif = NULL; | |
| } | |
| if (phba->slow_ring_trc) { | |
| kfree(phba->slow_ring_trc); | |
| phba->slow_ring_trc = NULL; | |
| } | |
| if (phba->debug_slow_ring_trc) { | |
| /* slow_ring_trace */ | |
| debugfs_remove(phba->debug_slow_ring_trc); | |
| phba->debug_slow_ring_trc = NULL; | |
| } | |
| /* | |
| * iDiag release | |
| */ | |
| if (phba->sli_rev == LPFC_SLI_REV4) { | |
| if (phba->idiag_que_info) { | |
| /* iDiag queInfo */ | |
| debugfs_remove(phba->idiag_que_info); | |
| phba->idiag_que_info = NULL; | |
| } | |
| if (phba->idiag_pci_cfg) { | |
| /* iDiag pciCfg */ | |
| debugfs_remove(phba->idiag_pci_cfg); | |
| phba->idiag_pci_cfg = NULL; | |
| } | |
| /* Finally remove the iDiag debugfs root */ | |
| if (phba->idiag_root) { | |
| /* iDiag root */ | |
| debugfs_remove(phba->idiag_root); | |
| phba->idiag_root = NULL; | |
| } | |
| } | |
| if (phba->hba_debugfs_root) { | |
| debugfs_remove(phba->hba_debugfs_root); /* fnX */ | |
| phba->hba_debugfs_root = NULL; | |
| atomic_dec(&lpfc_debugfs_hba_count); | |
| } | |
| if (atomic_read(&lpfc_debugfs_hba_count) == 0) { | |
| debugfs_remove(lpfc_debugfs_root); /* lpfc */ | |
| lpfc_debugfs_root = NULL; | |
| } | |
| } | |
| #endif | |
| return; | |
| } |