| /* | |
| * Boot code and exception vectors for Book3E processors | |
| * | |
| * Copyright (C) 2007 Ben. Herrenschmidt (benh@kernel.crashing.org), IBM Corp. | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License | |
| * as published by the Free Software Foundation; either version | |
| * 2 of the License, or (at your option) any later version. | |
| */ | |
| #include <linux/threads.h> | |
| #include <asm/reg.h> | |
| #include <asm/page.h> | |
| #include <asm/ppc_asm.h> | |
| #include <asm/asm-offsets.h> | |
| #include <asm/cputable.h> | |
| #include <asm/setup.h> | |
| #include <asm/thread_info.h> | |
| #include <asm/reg_a2.h> | |
| #include <asm/exception-64e.h> | |
| #include <asm/bug.h> | |
| #include <asm/irqflags.h> | |
| #include <asm/ptrace.h> | |
| #include <asm/ppc-opcode.h> | |
| #include <asm/mmu.h> | |
| #include <asm/hw_irq.h> | |
| #include <asm/kvm_asm.h> | |
| #include <asm/kvm_booke_hv_asm.h> | |
| /* XXX This will ultimately add space for a special exception save | |
| * structure used to save things like SRR0/SRR1, SPRGs, MAS, etc... | |
| * when taking special interrupts. For now we don't support that, | |
| * special interrupts from within a non-standard level will probably | |
| * blow you up | |
| */ | |
| #define SPECIAL_EXC_SRR0 0 | |
| #define SPECIAL_EXC_SRR1 1 | |
| #define SPECIAL_EXC_SPRG_GEN 2 | |
| #define SPECIAL_EXC_SPRG_TLB 3 | |
| #define SPECIAL_EXC_MAS0 4 | |
| #define SPECIAL_EXC_MAS1 5 | |
| #define SPECIAL_EXC_MAS2 6 | |
| #define SPECIAL_EXC_MAS3 7 | |
| #define SPECIAL_EXC_MAS6 8 | |
| #define SPECIAL_EXC_MAS7 9 | |
| #define SPECIAL_EXC_MAS5 10 /* E.HV only */ | |
| #define SPECIAL_EXC_MAS8 11 /* E.HV only */ | |
| #define SPECIAL_EXC_IRQHAPPENED 12 | |
| #define SPECIAL_EXC_DEAR 13 | |
| #define SPECIAL_EXC_ESR 14 | |
| #define SPECIAL_EXC_SOFTE 15 | |
| #define SPECIAL_EXC_CSRR0 16 | |
| #define SPECIAL_EXC_CSRR1 17 | |
| /* must be even to keep 16-byte stack alignment */ | |
| #define SPECIAL_EXC_END 18 | |
| #define SPECIAL_EXC_FRAME_SIZE (INT_FRAME_SIZE + SPECIAL_EXC_END * 8) | |
| #define SPECIAL_EXC_FRAME_OFFS (INT_FRAME_SIZE - 288) | |
| #define SPECIAL_EXC_STORE(reg, name) \ | |
| std reg, (SPECIAL_EXC_##name * 8 + SPECIAL_EXC_FRAME_OFFS)(r1) | |
| #define SPECIAL_EXC_LOAD(reg, name) \ | |
| ld reg, (SPECIAL_EXC_##name * 8 + SPECIAL_EXC_FRAME_OFFS)(r1) | |
| special_reg_save: | |
| lbz r9,PACAIRQHAPPENED(r13) | |
| RECONCILE_IRQ_STATE(r3,r4) | |
| /* | |
| * We only need (or have stack space) to save this stuff if | |
| * we interrupted the kernel. | |
| */ | |
| ld r3,_MSR(r1) | |
| andi. r3,r3,MSR_PR | |
| bnelr | |
| /* Copy info into temporary exception thread info */ | |
| ld r11,PACAKSAVE(r13) | |
| CURRENT_THREAD_INFO(r11, r11) | |
| CURRENT_THREAD_INFO(r12, r1) | |
| ld r10,TI_FLAGS(r11) | |
| std r10,TI_FLAGS(r12) | |
| ld r10,TI_PREEMPT(r11) | |
| std r10,TI_PREEMPT(r12) | |
| ld r10,TI_TASK(r11) | |
| std r10,TI_TASK(r12) | |
| /* | |
| * Advance to the next TLB exception frame for handler | |
| * types that don't do it automatically. | |
| */ | |
| LOAD_REG_ADDR(r11,extlb_level_exc) | |
| lwz r12,0(r11) | |
| mfspr r10,SPRN_SPRG_TLB_EXFRAME | |
| add r10,r10,r12 | |
| mtspr SPRN_SPRG_TLB_EXFRAME,r10 | |
| /* | |
| * Save registers needed to allow nesting of certain exceptions | |
| * (such as TLB misses) inside special exception levels | |
| */ | |
| mfspr r10,SPRN_SRR0 | |
| SPECIAL_EXC_STORE(r10,SRR0) | |
| mfspr r10,SPRN_SRR1 | |
| SPECIAL_EXC_STORE(r10,SRR1) | |
| mfspr r10,SPRN_SPRG_GEN_SCRATCH | |
| SPECIAL_EXC_STORE(r10,SPRG_GEN) | |
| mfspr r10,SPRN_SPRG_TLB_SCRATCH | |
| SPECIAL_EXC_STORE(r10,SPRG_TLB) | |
| mfspr r10,SPRN_MAS0 | |
| SPECIAL_EXC_STORE(r10,MAS0) | |
| mfspr r10,SPRN_MAS1 | |
| SPECIAL_EXC_STORE(r10,MAS1) | |
| mfspr r10,SPRN_MAS2 | |
| SPECIAL_EXC_STORE(r10,MAS2) | |
| mfspr r10,SPRN_MAS3 | |
| SPECIAL_EXC_STORE(r10,MAS3) | |
| mfspr r10,SPRN_MAS6 | |
| SPECIAL_EXC_STORE(r10,MAS6) | |
| mfspr r10,SPRN_MAS7 | |
| SPECIAL_EXC_STORE(r10,MAS7) | |
| BEGIN_FTR_SECTION | |
| mfspr r10,SPRN_MAS5 | |
| SPECIAL_EXC_STORE(r10,MAS5) | |
| mfspr r10,SPRN_MAS8 | |
| SPECIAL_EXC_STORE(r10,MAS8) | |
| /* MAS5/8 could have inappropriate values if we interrupted KVM code */ | |
| li r10,0 | |
| mtspr SPRN_MAS5,r10 | |
| mtspr SPRN_MAS8,r10 | |
| END_FTR_SECTION_IFSET(CPU_FTR_EMB_HV) | |
| SPECIAL_EXC_STORE(r9,IRQHAPPENED) | |
| mfspr r10,SPRN_DEAR | |
| SPECIAL_EXC_STORE(r10,DEAR) | |
| mfspr r10,SPRN_ESR | |
| SPECIAL_EXC_STORE(r10,ESR) | |
| lbz r10,PACASOFTIRQEN(r13) | |
| SPECIAL_EXC_STORE(r10,SOFTE) | |
| ld r10,_NIP(r1) | |
| SPECIAL_EXC_STORE(r10,CSRR0) | |
| ld r10,_MSR(r1) | |
| SPECIAL_EXC_STORE(r10,CSRR1) | |
| blr | |
| ret_from_level_except: | |
| ld r3,_MSR(r1) | |
| andi. r3,r3,MSR_PR | |
| beq 1f | |
| b ret_from_except | |
| 1: | |
| LOAD_REG_ADDR(r11,extlb_level_exc) | |
| lwz r12,0(r11) | |
| mfspr r10,SPRN_SPRG_TLB_EXFRAME | |
| sub r10,r10,r12 | |
| mtspr SPRN_SPRG_TLB_EXFRAME,r10 | |
| /* | |
| * It's possible that the special level exception interrupted a | |
| * TLB miss handler, and inserted the same entry that the | |
| * interrupted handler was about to insert. On CPUs without TLB | |
| * write conditional, this can result in a duplicate TLB entry. | |
| * Wipe all non-bolted entries to be safe. | |
| * | |
| * Note that this doesn't protect against any TLB misses | |
| * we may take accessing the stack from here to the end of | |
| * the special level exception. It's not clear how we can | |
| * reasonably protect against that, but only CPUs with | |
| * neither TLB write conditional nor bolted kernel memory | |
| * are affected. Do any such CPUs even exist? | |
| */ | |
| PPC_TLBILX_ALL(0,R0) | |
| REST_NVGPRS(r1) | |
| SPECIAL_EXC_LOAD(r10,SRR0) | |
| mtspr SPRN_SRR0,r10 | |
| SPECIAL_EXC_LOAD(r10,SRR1) | |
| mtspr SPRN_SRR1,r10 | |
| SPECIAL_EXC_LOAD(r10,SPRG_GEN) | |
| mtspr SPRN_SPRG_GEN_SCRATCH,r10 | |
| SPECIAL_EXC_LOAD(r10,SPRG_TLB) | |
| mtspr SPRN_SPRG_TLB_SCRATCH,r10 | |
| SPECIAL_EXC_LOAD(r10,MAS0) | |
| mtspr SPRN_MAS0,r10 | |
| SPECIAL_EXC_LOAD(r10,MAS1) | |
| mtspr SPRN_MAS1,r10 | |
| SPECIAL_EXC_LOAD(r10,MAS2) | |
| mtspr SPRN_MAS2,r10 | |
| SPECIAL_EXC_LOAD(r10,MAS3) | |
| mtspr SPRN_MAS3,r10 | |
| SPECIAL_EXC_LOAD(r10,MAS6) | |
| mtspr SPRN_MAS6,r10 | |
| SPECIAL_EXC_LOAD(r10,MAS7) | |
| mtspr SPRN_MAS7,r10 | |
| BEGIN_FTR_SECTION | |
| SPECIAL_EXC_LOAD(r10,MAS5) | |
| mtspr SPRN_MAS5,r10 | |
| SPECIAL_EXC_LOAD(r10,MAS8) | |
| mtspr SPRN_MAS8,r10 | |
| END_FTR_SECTION_IFSET(CPU_FTR_EMB_HV) | |
| lbz r6,PACASOFTIRQEN(r13) | |
| ld r5,SOFTE(r1) | |
| /* Interrupts had better not already be enabled... */ | |
| twnei r6,0 | |
| cmpwi cr0,r5,0 | |
| beq 1f | |
| TRACE_ENABLE_INTS | |
| stb r5,PACASOFTIRQEN(r13) | |
| 1: | |
| /* | |
| * Restore PACAIRQHAPPENED rather than setting it based on | |
| * the return MSR[EE], since we could have interrupted | |
| * __check_irq_replay() or other inconsistent transitory | |
| * states that must remain that way. | |
| */ | |
| SPECIAL_EXC_LOAD(r10,IRQHAPPENED) | |
| stb r10,PACAIRQHAPPENED(r13) | |
| SPECIAL_EXC_LOAD(r10,DEAR) | |
| mtspr SPRN_DEAR,r10 | |
| SPECIAL_EXC_LOAD(r10,ESR) | |
| mtspr SPRN_ESR,r10 | |
| stdcx. r0,0,r1 /* to clear the reservation */ | |
| REST_4GPRS(2, r1) | |
| REST_4GPRS(6, r1) | |
| ld r10,_CTR(r1) | |
| ld r11,_XER(r1) | |
| mtctr r10 | |
| mtxer r11 | |
| blr | |
| .macro ret_from_level srr0 srr1 paca_ex scratch | |
| bl ret_from_level_except | |
| ld r10,_LINK(r1) | |
| ld r11,_CCR(r1) | |
| ld r0,GPR13(r1) | |
| mtlr r10 | |
| mtcr r11 | |
| ld r10,GPR10(r1) | |
| ld r11,GPR11(r1) | |
| ld r12,GPR12(r1) | |
| mtspr \scratch,r0 | |
| std r10,\paca_ex+EX_R10(r13); | |
| std r11,\paca_ex+EX_R11(r13); | |
| ld r10,_NIP(r1) | |
| ld r11,_MSR(r1) | |
| ld r0,GPR0(r1) | |
| ld r1,GPR1(r1) | |
| mtspr \srr0,r10 | |
| mtspr \srr1,r11 | |
| ld r10,\paca_ex+EX_R10(r13) | |
| ld r11,\paca_ex+EX_R11(r13) | |
| mfspr r13,\scratch | |
| .endm | |
| ret_from_crit_except: | |
| ret_from_level SPRN_CSRR0 SPRN_CSRR1 PACA_EXCRIT SPRN_SPRG_CRIT_SCRATCH | |
| rfci | |
| ret_from_mc_except: | |
| ret_from_level SPRN_MCSRR0 SPRN_MCSRR1 PACA_EXMC SPRN_SPRG_MC_SCRATCH | |
| rfmci | |
| /* Exception prolog code for all exceptions */ | |
| #define EXCEPTION_PROLOG(n, intnum, type, addition) \ | |
| mtspr SPRN_SPRG_##type##_SCRATCH,r13; /* get spare registers */ \ | |
| mfspr r13,SPRN_SPRG_PACA; /* get PACA */ \ | |
| std r10,PACA_EX##type+EX_R10(r13); \ | |
| std r11,PACA_EX##type+EX_R11(r13); \ | |
| mfcr r10; /* save CR */ \ | |
| mfspr r11,SPRN_##type##_SRR1;/* what are we coming from */ \ | |
| DO_KVM intnum,SPRN_##type##_SRR1; /* KVM hook */ \ | |
| stw r10,PACA_EX##type+EX_CR(r13); /* save old CR in the PACA */ \ | |
| addition; /* additional code for that exc. */ \ | |
| std r1,PACA_EX##type+EX_R1(r13); /* save old r1 in the PACA */ \ | |
| type##_SET_KSTACK; /* get special stack if necessary */\ | |
| andi. r10,r11,MSR_PR; /* save stack pointer */ \ | |
| beq 1f; /* branch around if supervisor */ \ | |
| ld r1,PACAKSAVE(r13); /* get kernel stack coming from usr */\ | |
| 1: cmpdi cr1,r1,0; /* check if SP makes sense */ \ | |
| bge- cr1,exc_##n##_bad_stack;/* bad stack (TODO: out of line) */ \ | |
| mfspr r10,SPRN_##type##_SRR0; /* read SRR0 before touching stack */ | |
| /* Exception type-specific macros */ | |
| #define GEN_SET_KSTACK \ | |
| subi r1,r1,INT_FRAME_SIZE; /* alloc frame on kernel stack */ | |
| #define SPRN_GEN_SRR0 SPRN_SRR0 | |
| #define SPRN_GEN_SRR1 SPRN_SRR1 | |
| #define GDBELL_SET_KSTACK GEN_SET_KSTACK | |
| #define SPRN_GDBELL_SRR0 SPRN_GSRR0 | |
| #define SPRN_GDBELL_SRR1 SPRN_GSRR1 | |
| #define CRIT_SET_KSTACK \ | |
| ld r1,PACA_CRIT_STACK(r13); \ | |
| subi r1,r1,SPECIAL_EXC_FRAME_SIZE | |
| #define SPRN_CRIT_SRR0 SPRN_CSRR0 | |
| #define SPRN_CRIT_SRR1 SPRN_CSRR1 | |
| #define DBG_SET_KSTACK \ | |
| ld r1,PACA_DBG_STACK(r13); \ | |
| subi r1,r1,SPECIAL_EXC_FRAME_SIZE | |
| #define SPRN_DBG_SRR0 SPRN_DSRR0 | |
| #define SPRN_DBG_SRR1 SPRN_DSRR1 | |
| #define MC_SET_KSTACK \ | |
| ld r1,PACA_MC_STACK(r13); \ | |
| subi r1,r1,SPECIAL_EXC_FRAME_SIZE | |
| #define SPRN_MC_SRR0 SPRN_MCSRR0 | |
| #define SPRN_MC_SRR1 SPRN_MCSRR1 | |
| #define NORMAL_EXCEPTION_PROLOG(n, intnum, addition) \ | |
| EXCEPTION_PROLOG(n, intnum, GEN, addition##_GEN(n)) | |
| #define CRIT_EXCEPTION_PROLOG(n, intnum, addition) \ | |
| EXCEPTION_PROLOG(n, intnum, CRIT, addition##_CRIT(n)) | |
| #define DBG_EXCEPTION_PROLOG(n, intnum, addition) \ | |
| EXCEPTION_PROLOG(n, intnum, DBG, addition##_DBG(n)) | |
| #define MC_EXCEPTION_PROLOG(n, intnum, addition) \ | |
| EXCEPTION_PROLOG(n, intnum, MC, addition##_MC(n)) | |
| #define GDBELL_EXCEPTION_PROLOG(n, intnum, addition) \ | |
| EXCEPTION_PROLOG(n, intnum, GDBELL, addition##_GDBELL(n)) | |
| /* Variants of the "addition" argument for the prolog | |
| */ | |
| #define PROLOG_ADDITION_NONE_GEN(n) | |
| #define PROLOG_ADDITION_NONE_GDBELL(n) | |
| #define PROLOG_ADDITION_NONE_CRIT(n) | |
| #define PROLOG_ADDITION_NONE_DBG(n) | |
| #define PROLOG_ADDITION_NONE_MC(n) | |
| #define PROLOG_ADDITION_MASKABLE_GEN(n) \ | |
| lbz r10,PACASOFTIRQEN(r13); /* are irqs soft-disabled ? */ \ | |
| cmpwi cr0,r10,0; /* yes -> go out of line */ \ | |
| beq masked_interrupt_book3e_##n | |
| #define PROLOG_ADDITION_2REGS_GEN(n) \ | |
| std r14,PACA_EXGEN+EX_R14(r13); \ | |
| std r15,PACA_EXGEN+EX_R15(r13) | |
| #define PROLOG_ADDITION_1REG_GEN(n) \ | |
| std r14,PACA_EXGEN+EX_R14(r13); | |
| #define PROLOG_ADDITION_2REGS_CRIT(n) \ | |
| std r14,PACA_EXCRIT+EX_R14(r13); \ | |
| std r15,PACA_EXCRIT+EX_R15(r13) | |
| #define PROLOG_ADDITION_2REGS_DBG(n) \ | |
| std r14,PACA_EXDBG+EX_R14(r13); \ | |
| std r15,PACA_EXDBG+EX_R15(r13) | |
| #define PROLOG_ADDITION_2REGS_MC(n) \ | |
| std r14,PACA_EXMC+EX_R14(r13); \ | |
| std r15,PACA_EXMC+EX_R15(r13) | |
| /* Core exception code for all exceptions except TLB misses. */ | |
| #define EXCEPTION_COMMON_LVL(n, scratch, excf) \ | |
| exc_##n##_common: \ | |
| std r0,GPR0(r1); /* save r0 in stackframe */ \ | |
| std r2,GPR2(r1); /* save r2 in stackframe */ \ | |
| SAVE_4GPRS(3, r1); /* save r3 - r6 in stackframe */ \ | |
| SAVE_2GPRS(7, r1); /* save r7, r8 in stackframe */ \ | |
| std r9,GPR9(r1); /* save r9 in stackframe */ \ | |
| std r10,_NIP(r1); /* save SRR0 to stackframe */ \ | |
| std r11,_MSR(r1); /* save SRR1 to stackframe */ \ | |
| beq 2f; /* if from kernel mode */ \ | |
| ACCOUNT_CPU_USER_ENTRY(r10,r11);/* accounting (uses cr0+eq) */ \ | |
| 2: ld r3,excf+EX_R10(r13); /* get back r10 */ \ | |
| ld r4,excf+EX_R11(r13); /* get back r11 */ \ | |
| mfspr r5,scratch; /* get back r13 */ \ | |
| std r12,GPR12(r1); /* save r12 in stackframe */ \ | |
| ld r2,PACATOC(r13); /* get kernel TOC into r2 */ \ | |
| mflr r6; /* save LR in stackframe */ \ | |
| mfctr r7; /* save CTR in stackframe */ \ | |
| mfspr r8,SPRN_XER; /* save XER in stackframe */ \ | |
| ld r9,excf+EX_R1(r13); /* load orig r1 back from PACA */ \ | |
| lwz r10,excf+EX_CR(r13); /* load orig CR back from PACA */ \ | |
| lbz r11,PACASOFTIRQEN(r13); /* get current IRQ softe */ \ | |
| ld r12,exception_marker@toc(r2); \ | |
| li r0,0; \ | |
| std r3,GPR10(r1); /* save r10 to stackframe */ \ | |
| std r4,GPR11(r1); /* save r11 to stackframe */ \ | |
| std r5,GPR13(r1); /* save it to stackframe */ \ | |
| std r6,_LINK(r1); \ | |
| std r7,_CTR(r1); \ | |
| std r8,_XER(r1); \ | |
| li r3,(n)+1; /* indicate partial regs in trap */ \ | |
| std r9,0(r1); /* store stack frame back link */ \ | |
| std r10,_CCR(r1); /* store orig CR in stackframe */ \ | |
| std r9,GPR1(r1); /* store stack frame back link */ \ | |
| std r11,SOFTE(r1); /* and save it to stackframe */ \ | |
| std r12,STACK_FRAME_OVERHEAD-16(r1); /* mark the frame */ \ | |
| std r3,_TRAP(r1); /* set trap number */ \ | |
| std r0,RESULT(r1); /* clear regs->result */ | |
| #define EXCEPTION_COMMON(n) \ | |
| EXCEPTION_COMMON_LVL(n, SPRN_SPRG_GEN_SCRATCH, PACA_EXGEN) | |
| #define EXCEPTION_COMMON_CRIT(n) \ | |
| EXCEPTION_COMMON_LVL(n, SPRN_SPRG_CRIT_SCRATCH, PACA_EXCRIT) | |
| #define EXCEPTION_COMMON_MC(n) \ | |
| EXCEPTION_COMMON_LVL(n, SPRN_SPRG_MC_SCRATCH, PACA_EXMC) | |
| #define EXCEPTION_COMMON_DBG(n) \ | |
| EXCEPTION_COMMON_LVL(n, SPRN_SPRG_DBG_SCRATCH, PACA_EXDBG) | |
| /* | |
| * This is meant for exceptions that don't immediately hard-enable. We | |
| * set a bit in paca->irq_happened to ensure that a subsequent call to | |
| * arch_local_irq_restore() will properly hard-enable and avoid the | |
| * fast-path, and then reconcile irq state. | |
| */ | |
| #define INTS_DISABLE RECONCILE_IRQ_STATE(r3,r4) | |
| /* | |
| * This is called by exceptions that don't use INTS_DISABLE (that did not | |
| * touch irq indicators in the PACA). This will restore MSR:EE to it's | |
| * previous value | |
| * | |
| * XXX In the long run, we may want to open-code it in order to separate the | |
| * load from the wrtee, thus limiting the latency caused by the dependency | |
| * but at this point, I'll favor code clarity until we have a near to final | |
| * implementation | |
| */ | |
| #define INTS_RESTORE_HARD \ | |
| ld r11,_MSR(r1); \ | |
| wrtee r11; | |
| /* XXX FIXME: Restore r14/r15 when necessary */ | |
| #define BAD_STACK_TRAMPOLINE(n) \ | |
| exc_##n##_bad_stack: \ | |
| li r1,(n); /* get exception number */ \ | |
| sth r1,PACA_TRAP_SAVE(r13); /* store trap */ \ | |
| b bad_stack_book3e; /* bad stack error */ | |
| /* WARNING: If you change the layout of this stub, make sure you chcek | |
| * the debug exception handler which handles single stepping | |
| * into exceptions from userspace, and the MM code in | |
| * arch/powerpc/mm/tlb_nohash.c which patches the branch here | |
| * and would need to be updated if that branch is moved | |
| */ | |
| #define EXCEPTION_STUB(loc, label) \ | |
| . = interrupt_base_book3e + loc; \ | |
| nop; /* To make debug interrupts happy */ \ | |
| b exc_##label##_book3e; | |
| #define ACK_NONE(r) | |
| #define ACK_DEC(r) \ | |
| lis r,TSR_DIS@h; \ | |
| mtspr SPRN_TSR,r | |
| #define ACK_FIT(r) \ | |
| lis r,TSR_FIS@h; \ | |
| mtspr SPRN_TSR,r | |
| /* Used by asynchronous interrupt that may happen in the idle loop. | |
| * | |
| * This check if the thread was in the idle loop, and if yes, returns | |
| * to the caller rather than the PC. This is to avoid a race if | |
| * interrupts happen before the wait instruction. | |
| */ | |
| #define CHECK_NAPPING() \ | |
| CURRENT_THREAD_INFO(r11, r1); \ | |
| ld r10,TI_LOCAL_FLAGS(r11); \ | |
| andi. r9,r10,_TLF_NAPPING; \ | |
| beq+ 1f; \ | |
| ld r8,_LINK(r1); \ | |
| rlwinm r7,r10,0,~_TLF_NAPPING; \ | |
| std r8,_NIP(r1); \ | |
| std r7,TI_LOCAL_FLAGS(r11); \ | |
| 1: | |
| #define MASKABLE_EXCEPTION(trapnum, intnum, label, hdlr, ack) \ | |
| START_EXCEPTION(label); \ | |
| NORMAL_EXCEPTION_PROLOG(trapnum, intnum, PROLOG_ADDITION_MASKABLE)\ | |
| EXCEPTION_COMMON(trapnum) \ | |
| INTS_DISABLE; \ | |
| ack(r8); \ | |
| CHECK_NAPPING(); \ | |
| addi r3,r1,STACK_FRAME_OVERHEAD; \ | |
| bl hdlr; \ | |
| b .ret_from_except_lite; | |
| /* This value is used to mark exception frames on the stack. */ | |
| .section ".toc","aw" | |
| exception_marker: | |
| .tc ID_EXC_MARKER[TC],STACK_FRAME_REGS_MARKER | |
| /* | |
| * And here we have the exception vectors ! | |
| */ | |
| .text | |
| .balign 0x1000 | |
| .globl interrupt_base_book3e | |
| interrupt_base_book3e: /* fake trap */ | |
| EXCEPTION_STUB(0x000, machine_check) | |
| EXCEPTION_STUB(0x020, critical_input) /* 0x0100 */ | |
| EXCEPTION_STUB(0x040, debug_crit) /* 0x0d00 */ | |
| EXCEPTION_STUB(0x060, data_storage) /* 0x0300 */ | |
| EXCEPTION_STUB(0x080, instruction_storage) /* 0x0400 */ | |
| EXCEPTION_STUB(0x0a0, external_input) /* 0x0500 */ | |
| EXCEPTION_STUB(0x0c0, alignment) /* 0x0600 */ | |
| EXCEPTION_STUB(0x0e0, program) /* 0x0700 */ | |
| EXCEPTION_STUB(0x100, fp_unavailable) /* 0x0800 */ | |
| EXCEPTION_STUB(0x120, system_call) /* 0x0c00 */ | |
| EXCEPTION_STUB(0x140, ap_unavailable) /* 0x0f20 */ | |
| EXCEPTION_STUB(0x160, decrementer) /* 0x0900 */ | |
| EXCEPTION_STUB(0x180, fixed_interval) /* 0x0980 */ | |
| EXCEPTION_STUB(0x1a0, watchdog) /* 0x09f0 */ | |
| EXCEPTION_STUB(0x1c0, data_tlb_miss) | |
| EXCEPTION_STUB(0x1e0, instruction_tlb_miss) | |
| EXCEPTION_STUB(0x200, altivec_unavailable) | |
| EXCEPTION_STUB(0x220, altivec_assist) | |
| EXCEPTION_STUB(0x260, perfmon) | |
| EXCEPTION_STUB(0x280, doorbell) | |
| EXCEPTION_STUB(0x2a0, doorbell_crit) | |
| EXCEPTION_STUB(0x2c0, guest_doorbell) | |
| EXCEPTION_STUB(0x2e0, guest_doorbell_crit) | |
| EXCEPTION_STUB(0x300, hypercall) | |
| EXCEPTION_STUB(0x320, ehpriv) | |
| EXCEPTION_STUB(0x340, lrat_error) | |
| .globl interrupt_end_book3e | |
| interrupt_end_book3e: | |
| /* Critical Input Interrupt */ | |
| START_EXCEPTION(critical_input); | |
| CRIT_EXCEPTION_PROLOG(0x100, BOOKE_INTERRUPT_CRITICAL, | |
| PROLOG_ADDITION_NONE) | |
| EXCEPTION_COMMON_CRIT(0x100) | |
| bl .save_nvgprs | |
| bl special_reg_save | |
| CHECK_NAPPING(); | |
| addi r3,r1,STACK_FRAME_OVERHEAD | |
| bl .unknown_exception | |
| b ret_from_crit_except | |
| /* Machine Check Interrupt */ | |
| START_EXCEPTION(machine_check); | |
| MC_EXCEPTION_PROLOG(0x000, BOOKE_INTERRUPT_MACHINE_CHECK, | |
| PROLOG_ADDITION_NONE) | |
| EXCEPTION_COMMON_MC(0x000) | |
| bl .save_nvgprs | |
| bl special_reg_save | |
| CHECK_NAPPING(); | |
| addi r3,r1,STACK_FRAME_OVERHEAD | |
| bl .machine_check_exception | |
| b ret_from_mc_except | |
| /* Data Storage Interrupt */ | |
| START_EXCEPTION(data_storage) | |
| NORMAL_EXCEPTION_PROLOG(0x300, BOOKE_INTERRUPT_DATA_STORAGE, | |
| PROLOG_ADDITION_2REGS) | |
| mfspr r14,SPRN_DEAR | |
| mfspr r15,SPRN_ESR | |
| EXCEPTION_COMMON(0x300) | |
| INTS_DISABLE | |
| b storage_fault_common | |
| /* Instruction Storage Interrupt */ | |
| START_EXCEPTION(instruction_storage); | |
| NORMAL_EXCEPTION_PROLOG(0x400, BOOKE_INTERRUPT_INST_STORAGE, | |
| PROLOG_ADDITION_2REGS) | |
| li r15,0 | |
| mr r14,r10 | |
| EXCEPTION_COMMON(0x400) | |
| INTS_DISABLE | |
| b storage_fault_common | |
| /* External Input Interrupt */ | |
| MASKABLE_EXCEPTION(0x500, BOOKE_INTERRUPT_EXTERNAL, | |
| external_input, .do_IRQ, ACK_NONE) | |
| /* Alignment */ | |
| START_EXCEPTION(alignment); | |
| NORMAL_EXCEPTION_PROLOG(0x600, BOOKE_INTERRUPT_ALIGNMENT, | |
| PROLOG_ADDITION_2REGS) | |
| mfspr r14,SPRN_DEAR | |
| mfspr r15,SPRN_ESR | |
| EXCEPTION_COMMON(0x600) | |
| b alignment_more /* no room, go out of line */ | |
| /* Program Interrupt */ | |
| START_EXCEPTION(program); | |
| NORMAL_EXCEPTION_PROLOG(0x700, BOOKE_INTERRUPT_PROGRAM, | |
| PROLOG_ADDITION_1REG) | |
| mfspr r14,SPRN_ESR | |
| EXCEPTION_COMMON(0x700) | |
| INTS_DISABLE | |
| std r14,_DSISR(r1) | |
| addi r3,r1,STACK_FRAME_OVERHEAD | |
| ld r14,PACA_EXGEN+EX_R14(r13) | |
| bl .save_nvgprs | |
| bl .program_check_exception | |
| b .ret_from_except | |
| /* Floating Point Unavailable Interrupt */ | |
| START_EXCEPTION(fp_unavailable); | |
| NORMAL_EXCEPTION_PROLOG(0x800, BOOKE_INTERRUPT_FP_UNAVAIL, | |
| PROLOG_ADDITION_NONE) | |
| /* we can probably do a shorter exception entry for that one... */ | |
| EXCEPTION_COMMON(0x800) | |
| ld r12,_MSR(r1) | |
| andi. r0,r12,MSR_PR; | |
| beq- 1f | |
| bl .load_up_fpu | |
| b fast_exception_return | |
| 1: INTS_DISABLE | |
| bl .save_nvgprs | |
| addi r3,r1,STACK_FRAME_OVERHEAD | |
| bl .kernel_fp_unavailable_exception | |
| b .ret_from_except | |
| /* Altivec Unavailable Interrupt */ | |
| START_EXCEPTION(altivec_unavailable); | |
| NORMAL_EXCEPTION_PROLOG(0x200, BOOKE_INTERRUPT_SPE_ALTIVEC_UNAVAIL, | |
| PROLOG_ADDITION_NONE) | |
| /* we can probably do a shorter exception entry for that one... */ | |
| EXCEPTION_COMMON(0x200) | |
| #ifdef CONFIG_ALTIVEC | |
| BEGIN_FTR_SECTION | |
| ld r12,_MSR(r1) | |
| andi. r0,r12,MSR_PR; | |
| beq- 1f | |
| bl .load_up_altivec | |
| b fast_exception_return | |
| 1: | |
| END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) | |
| #endif | |
| INTS_DISABLE | |
| bl .save_nvgprs | |
| addi r3,r1,STACK_FRAME_OVERHEAD | |
| bl .altivec_unavailable_exception | |
| b .ret_from_except | |
| /* AltiVec Assist */ | |
| START_EXCEPTION(altivec_assist); | |
| NORMAL_EXCEPTION_PROLOG(0x220, | |
| BOOKE_INTERRUPT_SPE_FP_DATA_ALTIVEC_ASSIST, | |
| PROLOG_ADDITION_NONE) | |
| EXCEPTION_COMMON(0x220) | |
| INTS_DISABLE | |
| bl .save_nvgprs | |
| addi r3,r1,STACK_FRAME_OVERHEAD | |
| #ifdef CONFIG_ALTIVEC | |
| BEGIN_FTR_SECTION | |
| bl .altivec_assist_exception | |
| END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) | |
| #else | |
| bl .unknown_exception | |
| #endif | |
| b .ret_from_except | |
| /* Decrementer Interrupt */ | |
| MASKABLE_EXCEPTION(0x900, BOOKE_INTERRUPT_DECREMENTER, | |
| decrementer, .timer_interrupt, ACK_DEC) | |
| /* Fixed Interval Timer Interrupt */ | |
| MASKABLE_EXCEPTION(0x980, BOOKE_INTERRUPT_FIT, | |
| fixed_interval, .unknown_exception, ACK_FIT) | |
| /* Watchdog Timer Interrupt */ | |
| START_EXCEPTION(watchdog); | |
| CRIT_EXCEPTION_PROLOG(0x9f0, BOOKE_INTERRUPT_WATCHDOG, | |
| PROLOG_ADDITION_NONE) | |
| EXCEPTION_COMMON_CRIT(0x9f0) | |
| bl .save_nvgprs | |
| bl special_reg_save | |
| CHECK_NAPPING(); | |
| addi r3,r1,STACK_FRAME_OVERHEAD | |
| #ifdef CONFIG_BOOKE_WDT | |
| bl .WatchdogException | |
| #else | |
| bl .unknown_exception | |
| #endif | |
| b ret_from_crit_except | |
| /* System Call Interrupt */ | |
| START_EXCEPTION(system_call) | |
| mr r9,r13 /* keep a copy of userland r13 */ | |
| mfspr r11,SPRN_SRR0 /* get return address */ | |
| mfspr r12,SPRN_SRR1 /* get previous MSR */ | |
| mfspr r13,SPRN_SPRG_PACA /* get our PACA */ | |
| b system_call_common | |
| /* Auxiliary Processor Unavailable Interrupt */ | |
| START_EXCEPTION(ap_unavailable); | |
| NORMAL_EXCEPTION_PROLOG(0xf20, BOOKE_INTERRUPT_AP_UNAVAIL, | |
| PROLOG_ADDITION_NONE) | |
| EXCEPTION_COMMON(0xf20) | |
| INTS_DISABLE | |
| bl .save_nvgprs | |
| addi r3,r1,STACK_FRAME_OVERHEAD | |
| bl .unknown_exception | |
| b .ret_from_except | |
| /* Debug exception as a critical interrupt*/ | |
| START_EXCEPTION(debug_crit); | |
| CRIT_EXCEPTION_PROLOG(0xd00, BOOKE_INTERRUPT_DEBUG, | |
| PROLOG_ADDITION_2REGS) | |
| /* | |
| * If there is a single step or branch-taken exception in an | |
| * exception entry sequence, it was probably meant to apply to | |
| * the code where the exception occurred (since exception entry | |
| * doesn't turn off DE automatically). We simulate the effect | |
| * of turning off DE on entry to an exception handler by turning | |
| * off DE in the CSRR1 value and clearing the debug status. | |
| */ | |
| mfspr r14,SPRN_DBSR /* check single-step/branch taken */ | |
| andis. r15,r14,(DBSR_IC|DBSR_BT)@h | |
| beq+ 1f | |
| LOAD_REG_IMMEDIATE(r14,interrupt_base_book3e) | |
| LOAD_REG_IMMEDIATE(r15,interrupt_end_book3e) | |
| cmpld cr0,r10,r14 | |
| cmpld cr1,r10,r15 | |
| blt+ cr0,1f | |
| bge+ cr1,1f | |
| /* here it looks like we got an inappropriate debug exception. */ | |
| lis r14,(DBSR_IC|DBSR_BT)@h /* clear the event */ | |
| rlwinm r11,r11,0,~MSR_DE /* clear DE in the CSRR1 value */ | |
| mtspr SPRN_DBSR,r14 | |
| mtspr SPRN_CSRR1,r11 | |
| lwz r10,PACA_EXCRIT+EX_CR(r13) /* restore registers */ | |
| ld r1,PACA_EXCRIT+EX_R1(r13) | |
| ld r14,PACA_EXCRIT+EX_R14(r13) | |
| ld r15,PACA_EXCRIT+EX_R15(r13) | |
| mtcr r10 | |
| ld r10,PACA_EXCRIT+EX_R10(r13) /* restore registers */ | |
| ld r11,PACA_EXCRIT+EX_R11(r13) | |
| mfspr r13,SPRN_SPRG_CRIT_SCRATCH | |
| rfci | |
| /* Normal debug exception */ | |
| /* XXX We only handle coming from userspace for now since we can't | |
| * quite save properly an interrupted kernel state yet | |
| */ | |
| 1: andi. r14,r11,MSR_PR; /* check for userspace again */ | |
| beq kernel_dbg_exc; /* if from kernel mode */ | |
| /* Now we mash up things to make it look like we are coming on a | |
| * normal exception | |
| */ | |
| mfspr r14,SPRN_DBSR | |
| EXCEPTION_COMMON_CRIT(0xd00) | |
| std r14,_DSISR(r1) | |
| addi r3,r1,STACK_FRAME_OVERHEAD | |
| mr r4,r14 | |
| ld r14,PACA_EXCRIT+EX_R14(r13) | |
| ld r15,PACA_EXCRIT+EX_R15(r13) | |
| bl .save_nvgprs | |
| bl .DebugException | |
| b .ret_from_except | |
| kernel_dbg_exc: | |
| b . /* NYI */ | |
| /* Debug exception as a debug interrupt*/ | |
| START_EXCEPTION(debug_debug); | |
| DBG_EXCEPTION_PROLOG(0xd00, BOOKE_INTERRUPT_DEBUG, | |
| PROLOG_ADDITION_2REGS) | |
| /* | |
| * If there is a single step or branch-taken exception in an | |
| * exception entry sequence, it was probably meant to apply to | |
| * the code where the exception occurred (since exception entry | |
| * doesn't turn off DE automatically). We simulate the effect | |
| * of turning off DE on entry to an exception handler by turning | |
| * off DE in the DSRR1 value and clearing the debug status. | |
| */ | |
| mfspr r14,SPRN_DBSR /* check single-step/branch taken */ | |
| andis. r15,r14,(DBSR_IC|DBSR_BT)@h | |
| beq+ 1f | |
| LOAD_REG_IMMEDIATE(r14,interrupt_base_book3e) | |
| LOAD_REG_IMMEDIATE(r15,interrupt_end_book3e) | |
| cmpld cr0,r10,r14 | |
| cmpld cr1,r10,r15 | |
| blt+ cr0,1f | |
| bge+ cr1,1f | |
| /* here it looks like we got an inappropriate debug exception. */ | |
| lis r14,(DBSR_IC|DBSR_BT)@h /* clear the event */ | |
| rlwinm r11,r11,0,~MSR_DE /* clear DE in the DSRR1 value */ | |
| mtspr SPRN_DBSR,r14 | |
| mtspr SPRN_DSRR1,r11 | |
| lwz r10,PACA_EXDBG+EX_CR(r13) /* restore registers */ | |
| ld r1,PACA_EXDBG+EX_R1(r13) | |
| ld r14,PACA_EXDBG+EX_R14(r13) | |
| ld r15,PACA_EXDBG+EX_R15(r13) | |
| mtcr r10 | |
| ld r10,PACA_EXDBG+EX_R10(r13) /* restore registers */ | |
| ld r11,PACA_EXDBG+EX_R11(r13) | |
| mfspr r13,SPRN_SPRG_DBG_SCRATCH | |
| rfdi | |
| /* Normal debug exception */ | |
| /* XXX We only handle coming from userspace for now since we can't | |
| * quite save properly an interrupted kernel state yet | |
| */ | |
| 1: andi. r14,r11,MSR_PR; /* check for userspace again */ | |
| beq kernel_dbg_exc; /* if from kernel mode */ | |
| /* Now we mash up things to make it look like we are coming on a | |
| * normal exception | |
| */ | |
| mfspr r14,SPRN_DBSR | |
| EXCEPTION_COMMON_DBG(0xd08) | |
| INTS_DISABLE | |
| std r14,_DSISR(r1) | |
| addi r3,r1,STACK_FRAME_OVERHEAD | |
| mr r4,r14 | |
| ld r14,PACA_EXDBG+EX_R14(r13) | |
| ld r15,PACA_EXDBG+EX_R15(r13) | |
| bl .save_nvgprs | |
| bl .DebugException | |
| b .ret_from_except | |
| START_EXCEPTION(perfmon); | |
| NORMAL_EXCEPTION_PROLOG(0x260, BOOKE_INTERRUPT_PERFORMANCE_MONITOR, | |
| PROLOG_ADDITION_NONE) | |
| EXCEPTION_COMMON(0x260) | |
| INTS_DISABLE | |
| CHECK_NAPPING() | |
| addi r3,r1,STACK_FRAME_OVERHEAD | |
| bl .performance_monitor_exception | |
| b .ret_from_except_lite | |
| /* Doorbell interrupt */ | |
| MASKABLE_EXCEPTION(0x280, BOOKE_INTERRUPT_DOORBELL, | |
| doorbell, .doorbell_exception, ACK_NONE) | |
| /* Doorbell critical Interrupt */ | |
| START_EXCEPTION(doorbell_crit); | |
| CRIT_EXCEPTION_PROLOG(0x2a0, BOOKE_INTERRUPT_DOORBELL_CRITICAL, | |
| PROLOG_ADDITION_NONE) | |
| EXCEPTION_COMMON_CRIT(0x2a0) | |
| bl .save_nvgprs | |
| bl special_reg_save | |
| CHECK_NAPPING(); | |
| addi r3,r1,STACK_FRAME_OVERHEAD | |
| bl .unknown_exception | |
| b ret_from_crit_except | |
| /* | |
| * Guest doorbell interrupt | |
| * This general exception use GSRRx save/restore registers | |
| */ | |
| START_EXCEPTION(guest_doorbell); | |
| GDBELL_EXCEPTION_PROLOG(0x2c0, BOOKE_INTERRUPT_GUEST_DBELL, | |
| PROLOG_ADDITION_NONE) | |
| EXCEPTION_COMMON(0x2c0) | |
| addi r3,r1,STACK_FRAME_OVERHEAD | |
| bl .save_nvgprs | |
| INTS_RESTORE_HARD | |
| bl .unknown_exception | |
| b .ret_from_except | |
| /* Guest Doorbell critical Interrupt */ | |
| START_EXCEPTION(guest_doorbell_crit); | |
| CRIT_EXCEPTION_PROLOG(0x2e0, BOOKE_INTERRUPT_GUEST_DBELL_CRIT, | |
| PROLOG_ADDITION_NONE) | |
| EXCEPTION_COMMON_CRIT(0x2e0) | |
| bl .save_nvgprs | |
| bl special_reg_save | |
| CHECK_NAPPING(); | |
| addi r3,r1,STACK_FRAME_OVERHEAD | |
| bl .unknown_exception | |
| b ret_from_crit_except | |
| /* Hypervisor call */ | |
| START_EXCEPTION(hypercall); | |
| NORMAL_EXCEPTION_PROLOG(0x310, BOOKE_INTERRUPT_HV_SYSCALL, | |
| PROLOG_ADDITION_NONE) | |
| EXCEPTION_COMMON(0x310) | |
| addi r3,r1,STACK_FRAME_OVERHEAD | |
| bl .save_nvgprs | |
| INTS_RESTORE_HARD | |
| bl .unknown_exception | |
| b .ret_from_except | |
| /* Embedded Hypervisor priviledged */ | |
| START_EXCEPTION(ehpriv); | |
| NORMAL_EXCEPTION_PROLOG(0x320, BOOKE_INTERRUPT_HV_PRIV, | |
| PROLOG_ADDITION_NONE) | |
| EXCEPTION_COMMON(0x320) | |
| addi r3,r1,STACK_FRAME_OVERHEAD | |
| bl .save_nvgprs | |
| INTS_RESTORE_HARD | |
| bl .unknown_exception | |
| b .ret_from_except | |
| /* LRAT Error interrupt */ | |
| START_EXCEPTION(lrat_error); | |
| NORMAL_EXCEPTION_PROLOG(0x340, BOOKE_INTERRUPT_LRAT_ERROR, | |
| PROLOG_ADDITION_NONE) | |
| EXCEPTION_COMMON(0x340) | |
| addi r3,r1,STACK_FRAME_OVERHEAD | |
| bl .save_nvgprs | |
| INTS_RESTORE_HARD | |
| bl .unknown_exception | |
| b .ret_from_except | |
| /* | |
| * An interrupt came in while soft-disabled; We mark paca->irq_happened | |
| * accordingly and if the interrupt is level sensitive, we hard disable | |
| */ | |
| .macro masked_interrupt_book3e paca_irq full_mask | |
| lbz r10,PACAIRQHAPPENED(r13) | |
| ori r10,r10,\paca_irq | |
| stb r10,PACAIRQHAPPENED(r13) | |
| .if \full_mask == 1 | |
| rldicl r10,r11,48,1 /* clear MSR_EE */ | |
| rotldi r11,r10,16 | |
| mtspr SPRN_SRR1,r11 | |
| .endif | |
| lwz r11,PACA_EXGEN+EX_CR(r13) | |
| mtcr r11 | |
| ld r10,PACA_EXGEN+EX_R10(r13) | |
| ld r11,PACA_EXGEN+EX_R11(r13) | |
| mfspr r13,SPRN_SPRG_GEN_SCRATCH | |
| rfi | |
| b . | |
| .endm | |
| masked_interrupt_book3e_0x500: | |
| // XXX When adding support for EPR, use PACA_IRQ_EE_EDGE | |
| masked_interrupt_book3e PACA_IRQ_EE 1 | |
| masked_interrupt_book3e_0x900: | |
| ACK_DEC(r10); | |
| masked_interrupt_book3e PACA_IRQ_DEC 0 | |
| masked_interrupt_book3e_0x980: | |
| ACK_FIT(r10); | |
| masked_interrupt_book3e PACA_IRQ_DEC 0 | |
| masked_interrupt_book3e_0x280: | |
| masked_interrupt_book3e_0x2c0: | |
| masked_interrupt_book3e PACA_IRQ_DBELL 0 | |
| /* | |
| * Called from arch_local_irq_enable when an interrupt needs | |
| * to be resent. r3 contains either 0x500,0x900,0x260 or 0x280 | |
| * to indicate the kind of interrupt. MSR:EE is already off. | |
| * We generate a stackframe like if a real interrupt had happened. | |
| * | |
| * Note: While MSR:EE is off, we need to make sure that _MSR | |
| * in the generated frame has EE set to 1 or the exception | |
| * handler will not properly re-enable them. | |
| */ | |
| _GLOBAL(__replay_interrupt) | |
| /* We are going to jump to the exception common code which | |
| * will retrieve various register values from the PACA which | |
| * we don't give a damn about. | |
| */ | |
| mflr r10 | |
| mfmsr r11 | |
| mfcr r4 | |
| mtspr SPRN_SPRG_GEN_SCRATCH,r13; | |
| std r1,PACA_EXGEN+EX_R1(r13); | |
| stw r4,PACA_EXGEN+EX_CR(r13); | |
| ori r11,r11,MSR_EE | |
| subi r1,r1,INT_FRAME_SIZE; | |
| cmpwi cr0,r3,0x500 | |
| beq exc_0x500_common | |
| cmpwi cr0,r3,0x900 | |
| beq exc_0x900_common | |
| cmpwi cr0,r3,0x280 | |
| beq exc_0x280_common | |
| blr | |
| /* | |
| * This is called from 0x300 and 0x400 handlers after the prologs with | |
| * r14 and r15 containing the fault address and error code, with the | |
| * original values stashed away in the PACA | |
| */ | |
| storage_fault_common: | |
| std r14,_DAR(r1) | |
| std r15,_DSISR(r1) | |
| addi r3,r1,STACK_FRAME_OVERHEAD | |
| mr r4,r14 | |
| mr r5,r15 | |
| ld r14,PACA_EXGEN+EX_R14(r13) | |
| ld r15,PACA_EXGEN+EX_R15(r13) | |
| bl .do_page_fault | |
| cmpdi r3,0 | |
| bne- 1f | |
| b .ret_from_except_lite | |
| 1: bl .save_nvgprs | |
| mr r5,r3 | |
| addi r3,r1,STACK_FRAME_OVERHEAD | |
| ld r4,_DAR(r1) | |
| bl .bad_page_fault | |
| b .ret_from_except | |
| /* | |
| * Alignment exception doesn't fit entirely in the 0x100 bytes so it | |
| * continues here. | |
| */ | |
| alignment_more: | |
| std r14,_DAR(r1) | |
| std r15,_DSISR(r1) | |
| addi r3,r1,STACK_FRAME_OVERHEAD | |
| ld r14,PACA_EXGEN+EX_R14(r13) | |
| ld r15,PACA_EXGEN+EX_R15(r13) | |
| bl .save_nvgprs | |
| INTS_RESTORE_HARD | |
| bl .alignment_exception | |
| b .ret_from_except | |
| /* | |
| * We branch here from entry_64.S for the last stage of the exception | |
| * return code path. MSR:EE is expected to be off at that point | |
| */ | |
| _GLOBAL(exception_return_book3e) | |
| b 1f | |
| /* This is the return from load_up_fpu fast path which could do with | |
| * less GPR restores in fact, but for now we have a single return path | |
| */ | |
| .globl fast_exception_return | |
| fast_exception_return: | |
| wrteei 0 | |
| 1: mr r0,r13 | |
| ld r10,_MSR(r1) | |
| REST_4GPRS(2, r1) | |
| andi. r6,r10,MSR_PR | |
| REST_2GPRS(6, r1) | |
| beq 1f | |
| ACCOUNT_CPU_USER_EXIT(r10, r11) | |
| ld r0,GPR13(r1) | |
| 1: stdcx. r0,0,r1 /* to clear the reservation */ | |
| ld r8,_CCR(r1) | |
| ld r9,_LINK(r1) | |
| ld r10,_CTR(r1) | |
| ld r11,_XER(r1) | |
| mtcr r8 | |
| mtlr r9 | |
| mtctr r10 | |
| mtxer r11 | |
| REST_2GPRS(8, r1) | |
| ld r10,GPR10(r1) | |
| ld r11,GPR11(r1) | |
| ld r12,GPR12(r1) | |
| mtspr SPRN_SPRG_GEN_SCRATCH,r0 | |
| std r10,PACA_EXGEN+EX_R10(r13); | |
| std r11,PACA_EXGEN+EX_R11(r13); | |
| ld r10,_NIP(r1) | |
| ld r11,_MSR(r1) | |
| ld r0,GPR0(r1) | |
| ld r1,GPR1(r1) | |
| mtspr SPRN_SRR0,r10 | |
| mtspr SPRN_SRR1,r11 | |
| ld r10,PACA_EXGEN+EX_R10(r13) | |
| ld r11,PACA_EXGEN+EX_R11(r13) | |
| mfspr r13,SPRN_SPRG_GEN_SCRATCH | |
| rfi | |
| /* | |
| * Trampolines used when spotting a bad kernel stack pointer in | |
| * the exception entry code. | |
| * | |
| * TODO: move some bits like SRR0 read to trampoline, pass PACA | |
| * index around, etc... to handle crit & mcheck | |
| */ | |
| BAD_STACK_TRAMPOLINE(0x000) | |
| BAD_STACK_TRAMPOLINE(0x100) | |
| BAD_STACK_TRAMPOLINE(0x200) | |
| BAD_STACK_TRAMPOLINE(0x220) | |
| BAD_STACK_TRAMPOLINE(0x260) | |
| BAD_STACK_TRAMPOLINE(0x280) | |
| BAD_STACK_TRAMPOLINE(0x2a0) | |
| BAD_STACK_TRAMPOLINE(0x2c0) | |
| BAD_STACK_TRAMPOLINE(0x2e0) | |
| BAD_STACK_TRAMPOLINE(0x300) | |
| BAD_STACK_TRAMPOLINE(0x310) | |
| BAD_STACK_TRAMPOLINE(0x320) | |
| BAD_STACK_TRAMPOLINE(0x340) | |
| BAD_STACK_TRAMPOLINE(0x400) | |
| BAD_STACK_TRAMPOLINE(0x500) | |
| BAD_STACK_TRAMPOLINE(0x600) | |
| BAD_STACK_TRAMPOLINE(0x700) | |
| BAD_STACK_TRAMPOLINE(0x800) | |
| BAD_STACK_TRAMPOLINE(0x900) | |
| BAD_STACK_TRAMPOLINE(0x980) | |
| BAD_STACK_TRAMPOLINE(0x9f0) | |
| BAD_STACK_TRAMPOLINE(0xa00) | |
| BAD_STACK_TRAMPOLINE(0xb00) | |
| BAD_STACK_TRAMPOLINE(0xc00) | |
| BAD_STACK_TRAMPOLINE(0xd00) | |
| BAD_STACK_TRAMPOLINE(0xd08) | |
| BAD_STACK_TRAMPOLINE(0xe00) | |
| BAD_STACK_TRAMPOLINE(0xf00) | |
| BAD_STACK_TRAMPOLINE(0xf20) | |
| .globl bad_stack_book3e | |
| bad_stack_book3e: | |
| /* XXX: Needs to make SPRN_SPRG_GEN depend on exception type */ | |
| mfspr r10,SPRN_SRR0; /* read SRR0 before touching stack */ | |
| ld r1,PACAEMERGSP(r13) | |
| subi r1,r1,64+INT_FRAME_SIZE | |
| std r10,_NIP(r1) | |
| std r11,_MSR(r1) | |
| ld r10,PACA_EXGEN+EX_R1(r13) /* FIXME for crit & mcheck */ | |
| lwz r11,PACA_EXGEN+EX_CR(r13) /* FIXME for crit & mcheck */ | |
| std r10,GPR1(r1) | |
| std r11,_CCR(r1) | |
| mfspr r10,SPRN_DEAR | |
| mfspr r11,SPRN_ESR | |
| std r10,_DAR(r1) | |
| std r11,_DSISR(r1) | |
| std r0,GPR0(r1); /* save r0 in stackframe */ \ | |
| std r2,GPR2(r1); /* save r2 in stackframe */ \ | |
| SAVE_4GPRS(3, r1); /* save r3 - r6 in stackframe */ \ | |
| SAVE_2GPRS(7, r1); /* save r7, r8 in stackframe */ \ | |
| std r9,GPR9(r1); /* save r9 in stackframe */ \ | |
| ld r3,PACA_EXGEN+EX_R10(r13);/* get back r10 */ \ | |
| ld r4,PACA_EXGEN+EX_R11(r13);/* get back r11 */ \ | |
| mfspr r5,SPRN_SPRG_GEN_SCRATCH;/* get back r13 XXX can be wrong */ \ | |
| std r3,GPR10(r1); /* save r10 to stackframe */ \ | |
| std r4,GPR11(r1); /* save r11 to stackframe */ \ | |
| std r12,GPR12(r1); /* save r12 in stackframe */ \ | |
| std r5,GPR13(r1); /* save it to stackframe */ \ | |
| mflr r10 | |
| mfctr r11 | |
| mfxer r12 | |
| std r10,_LINK(r1) | |
| std r11,_CTR(r1) | |
| std r12,_XER(r1) | |
| SAVE_10GPRS(14,r1) | |
| SAVE_8GPRS(24,r1) | |
| lhz r12,PACA_TRAP_SAVE(r13) | |
| std r12,_TRAP(r1) | |
| addi r11,r1,INT_FRAME_SIZE | |
| std r11,0(r1) | |
| li r12,0 | |
| std r12,0(r11) | |
| ld r2,PACATOC(r13) | |
| 1: addi r3,r1,STACK_FRAME_OVERHEAD | |
| bl .kernel_bad_stack | |
| b 1b | |
| /* | |
| * Setup the initial TLB for a core. This current implementation | |
| * assume that whatever we are running off will not conflict with | |
| * the new mapping at PAGE_OFFSET. | |
| */ | |
| _GLOBAL(initial_tlb_book3e) | |
| /* Look for the first TLB with IPROT set */ | |
| mfspr r4,SPRN_TLB0CFG | |
| andi. r3,r4,TLBnCFG_IPROT | |
| lis r3,MAS0_TLBSEL(0)@h | |
| bne found_iprot | |
| mfspr r4,SPRN_TLB1CFG | |
| andi. r3,r4,TLBnCFG_IPROT | |
| lis r3,MAS0_TLBSEL(1)@h | |
| bne found_iprot | |
| mfspr r4,SPRN_TLB2CFG | |
| andi. r3,r4,TLBnCFG_IPROT | |
| lis r3,MAS0_TLBSEL(2)@h | |
| bne found_iprot | |
| lis r3,MAS0_TLBSEL(3)@h | |
| mfspr r4,SPRN_TLB3CFG | |
| /* fall through */ | |
| found_iprot: | |
| andi. r5,r4,TLBnCFG_HES | |
| bne have_hes | |
| mflr r8 /* save LR */ | |
| /* 1. Find the index of the entry we're executing in | |
| * | |
| * r3 = MAS0_TLBSEL (for the iprot array) | |
| * r4 = SPRN_TLBnCFG | |
| */ | |
| bl invstr /* Find our address */ | |
| invstr: mflr r6 /* Make it accessible */ | |
| mfmsr r7 | |
| rlwinm r5,r7,27,31,31 /* extract MSR[IS] */ | |
| mfspr r7,SPRN_PID | |
| slwi r7,r7,16 | |
| or r7,r7,r5 | |
| mtspr SPRN_MAS6,r7 | |
| tlbsx 0,r6 /* search MSR[IS], SPID=PID */ | |
| mfspr r3,SPRN_MAS0 | |
| rlwinm r5,r3,16,20,31 /* Extract MAS0(Entry) */ | |
| mfspr r7,SPRN_MAS1 /* Insure IPROT set */ | |
| oris r7,r7,MAS1_IPROT@h | |
| mtspr SPRN_MAS1,r7 | |
| tlbwe | |
| /* 2. Invalidate all entries except the entry we're executing in | |
| * | |
| * r3 = MAS0 w/TLBSEL & ESEL for the entry we are running in | |
| * r4 = SPRN_TLBnCFG | |
| * r5 = ESEL of entry we are running in | |
| */ | |
| andi. r4,r4,TLBnCFG_N_ENTRY /* Extract # entries */ | |
| li r6,0 /* Set Entry counter to 0 */ | |
| 1: mr r7,r3 /* Set MAS0(TLBSEL) */ | |
| rlwimi r7,r6,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r6) */ | |
| mtspr SPRN_MAS0,r7 | |
| tlbre | |
| mfspr r7,SPRN_MAS1 | |
| rlwinm r7,r7,0,2,31 /* Clear MAS1 Valid and IPROT */ | |
| cmpw r5,r6 | |
| beq skpinv /* Dont update the current execution TLB */ | |
| mtspr SPRN_MAS1,r7 | |
| tlbwe | |
| isync | |
| skpinv: addi r6,r6,1 /* Increment */ | |
| cmpw r6,r4 /* Are we done? */ | |
| bne 1b /* If not, repeat */ | |
| /* Invalidate all TLBs */ | |
| PPC_TLBILX_ALL(0,R0) | |
| sync | |
| isync | |
| /* 3. Setup a temp mapping and jump to it | |
| * | |
| * r3 = MAS0 w/TLBSEL & ESEL for the entry we are running in | |
| * r5 = ESEL of entry we are running in | |
| */ | |
| andi. r7,r5,0x1 /* Find an entry not used and is non-zero */ | |
| addi r7,r7,0x1 | |
| mr r4,r3 /* Set MAS0(TLBSEL) = 1 */ | |
| mtspr SPRN_MAS0,r4 | |
| tlbre | |
| rlwimi r4,r7,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r7) */ | |
| mtspr SPRN_MAS0,r4 | |
| mfspr r7,SPRN_MAS1 | |
| xori r6,r7,MAS1_TS /* Setup TMP mapping in the other Address space */ | |
| mtspr SPRN_MAS1,r6 | |
| tlbwe | |
| mfmsr r6 | |
| xori r6,r6,MSR_IS | |
| mtspr SPRN_SRR1,r6 | |
| bl 1f /* Find our address */ | |
| 1: mflr r6 | |
| addi r6,r6,(2f - 1b) | |
| mtspr SPRN_SRR0,r6 | |
| rfi | |
| 2: | |
| /* 4. Clear out PIDs & Search info | |
| * | |
| * r3 = MAS0 w/TLBSEL & ESEL for the entry we started in | |
| * r4 = MAS0 w/TLBSEL & ESEL for the temp mapping | |
| * r5 = MAS3 | |
| */ | |
| li r6,0 | |
| mtspr SPRN_MAS6,r6 | |
| mtspr SPRN_PID,r6 | |
| /* 5. Invalidate mapping we started in | |
| * | |
| * r3 = MAS0 w/TLBSEL & ESEL for the entry we started in | |
| * r4 = MAS0 w/TLBSEL & ESEL for the temp mapping | |
| * r5 = MAS3 | |
| */ | |
| mtspr SPRN_MAS0,r3 | |
| tlbre | |
| mfspr r6,SPRN_MAS1 | |
| rlwinm r6,r6,0,2,31 /* clear IPROT and VALID */ | |
| mtspr SPRN_MAS1,r6 | |
| tlbwe | |
| sync | |
| isync | |
| /* The mapping only needs to be cache-coherent on SMP */ | |
| #ifdef CONFIG_SMP | |
| #define M_IF_SMP MAS2_M | |
| #else | |
| #define M_IF_SMP 0 | |
| #endif | |
| /* 6. Setup KERNELBASE mapping in TLB[0] | |
| * | |
| * r3 = MAS0 w/TLBSEL & ESEL for the entry we started in | |
| * r4 = MAS0 w/TLBSEL & ESEL for the temp mapping | |
| * r5 = MAS3 | |
| */ | |
| rlwinm r3,r3,0,16,3 /* clear ESEL */ | |
| mtspr SPRN_MAS0,r3 | |
| lis r6,(MAS1_VALID|MAS1_IPROT)@h | |
| ori r6,r6,(MAS1_TSIZE(BOOK3E_PAGESZ_1GB))@l | |
| mtspr SPRN_MAS1,r6 | |
| LOAD_REG_IMMEDIATE(r6, PAGE_OFFSET | M_IF_SMP) | |
| mtspr SPRN_MAS2,r6 | |
| rlwinm r5,r5,0,0,25 | |
| ori r5,r5,MAS3_SR | MAS3_SW | MAS3_SX | |
| mtspr SPRN_MAS3,r5 | |
| li r5,-1 | |
| rlwinm r5,r5,0,0,25 | |
| tlbwe | |
| /* 7. Jump to KERNELBASE mapping | |
| * | |
| * r4 = MAS0 w/TLBSEL & ESEL for the temp mapping | |
| */ | |
| /* Now we branch the new virtual address mapped by this entry */ | |
| LOAD_REG_IMMEDIATE(r6,2f) | |
| lis r7,MSR_KERNEL@h | |
| ori r7,r7,MSR_KERNEL@l | |
| mtspr SPRN_SRR0,r6 | |
| mtspr SPRN_SRR1,r7 | |
| rfi /* start execution out of TLB1[0] entry */ | |
| 2: | |
| /* 8. Clear out the temp mapping | |
| * | |
| * r4 = MAS0 w/TLBSEL & ESEL for the entry we are running in | |
| */ | |
| mtspr SPRN_MAS0,r4 | |
| tlbre | |
| mfspr r5,SPRN_MAS1 | |
| rlwinm r5,r5,0,2,31 /* clear IPROT and VALID */ | |
| mtspr SPRN_MAS1,r5 | |
| tlbwe | |
| sync | |
| isync | |
| /* We translate LR and return */ | |
| tovirt(r8,r8) | |
| mtlr r8 | |
| blr | |
| have_hes: | |
| /* Setup MAS 0,1,2,3 and 7 for tlbwe of a 1G entry that maps the | |
| * kernel linear mapping. We also set MAS8 once for all here though | |
| * that will have to be made dependent on whether we are running under | |
| * a hypervisor I suppose. | |
| */ | |
| /* BEWARE, MAGIC | |
| * This code is called as an ordinary function on the boot CPU. But to | |
| * avoid duplication, this code is also used in SCOM bringup of | |
| * secondary CPUs. We read the code between the initial_tlb_code_start | |
| * and initial_tlb_code_end labels one instruction at a time and RAM it | |
| * into the new core via SCOM. That doesn't process branches, so there | |
| * must be none between those two labels. It also means if this code | |
| * ever takes any parameters, the SCOM code must also be updated to | |
| * provide them. | |
| */ | |
| .globl a2_tlbinit_code_start | |
| a2_tlbinit_code_start: | |
| ori r11,r3,MAS0_WQ_ALLWAYS | |
| oris r11,r11,MAS0_ESEL(3)@h /* Use way 3: workaround A2 erratum 376 */ | |
| mtspr SPRN_MAS0,r11 | |
| lis r3,(MAS1_VALID | MAS1_IPROT)@h | |
| ori r3,r3,BOOK3E_PAGESZ_1GB << MAS1_TSIZE_SHIFT | |
| mtspr SPRN_MAS1,r3 | |
| LOAD_REG_IMMEDIATE(r3, PAGE_OFFSET | MAS2_M) | |
| mtspr SPRN_MAS2,r3 | |
| li r3,MAS3_SR | MAS3_SW | MAS3_SX | |
| mtspr SPRN_MAS7_MAS3,r3 | |
| li r3,0 | |
| mtspr SPRN_MAS8,r3 | |
| /* Write the TLB entry */ | |
| tlbwe | |
| .globl a2_tlbinit_after_linear_map | |
| a2_tlbinit_after_linear_map: | |
| /* Now we branch the new virtual address mapped by this entry */ | |
| LOAD_REG_IMMEDIATE(r3,1f) | |
| mtctr r3 | |
| bctr | |
| 1: /* We are now running at PAGE_OFFSET, clean the TLB of everything | |
| * else (including IPROTed things left by firmware) | |
| * r4 = TLBnCFG | |
| * r3 = current address (more or less) | |
| */ | |
| li r5,0 | |
| mtspr SPRN_MAS6,r5 | |
| tlbsx 0,r3 | |
| rlwinm r9,r4,0,TLBnCFG_N_ENTRY | |
| rlwinm r10,r4,8,0xff | |
| addi r10,r10,-1 /* Get inner loop mask */ | |
| li r3,1 | |
| mfspr r5,SPRN_MAS1 | |
| rlwinm r5,r5,0,(~(MAS1_VALID|MAS1_IPROT)) | |
| mfspr r6,SPRN_MAS2 | |
| rldicr r6,r6,0,51 /* Extract EPN */ | |
| mfspr r7,SPRN_MAS0 | |
| rlwinm r7,r7,0,0xffff0fff /* Clear HES and WQ */ | |
| rlwinm r8,r7,16,0xfff /* Extract ESEL */ | |
| 2: add r4,r3,r8 | |
| and r4,r4,r10 | |
| rlwimi r7,r4,16,MAS0_ESEL_MASK | |
| mtspr SPRN_MAS0,r7 | |
| mtspr SPRN_MAS1,r5 | |
| mtspr SPRN_MAS2,r6 | |
| tlbwe | |
| addi r3,r3,1 | |
| and. r4,r3,r10 | |
| bne 3f | |
| addis r6,r6,(1<<30)@h | |
| 3: | |
| cmpw r3,r9 | |
| blt 2b | |
| .globl a2_tlbinit_after_iprot_flush | |
| a2_tlbinit_after_iprot_flush: | |
| #ifdef CONFIG_PPC_EARLY_DEBUG_WSP | |
| /* Now establish early debug mappings if applicable */ | |
| /* Restore the MAS0 we used for linear mapping load */ | |
| mtspr SPRN_MAS0,r11 | |
| lis r3,(MAS1_VALID | MAS1_IPROT)@h | |
| ori r3,r3,(BOOK3E_PAGESZ_4K << MAS1_TSIZE_SHIFT) | |
| mtspr SPRN_MAS1,r3 | |
| LOAD_REG_IMMEDIATE(r3, WSP_UART_VIRT | MAS2_I | MAS2_G) | |
| mtspr SPRN_MAS2,r3 | |
| LOAD_REG_IMMEDIATE(r3, WSP_UART_PHYS | MAS3_SR | MAS3_SW) | |
| mtspr SPRN_MAS7_MAS3,r3 | |
| /* re-use the MAS8 value from the linear mapping */ | |
| tlbwe | |
| #endif /* CONFIG_PPC_EARLY_DEBUG_WSP */ | |
| PPC_TLBILX(0,0,R0) | |
| sync | |
| isync | |
| .globl a2_tlbinit_code_end | |
| a2_tlbinit_code_end: | |
| /* We translate LR and return */ | |
| mflr r3 | |
| tovirt(r3,r3) | |
| mtlr r3 | |
| blr | |
| /* | |
| * Main entry (boot CPU, thread 0) | |
| * | |
| * We enter here from head_64.S, possibly after the prom_init trampoline | |
| * with r3 and r4 already saved to r31 and 30 respectively and in 64 bits | |
| * mode. Anything else is as it was left by the bootloader | |
| * | |
| * Initial requirements of this port: | |
| * | |
| * - Kernel loaded at 0 physical | |
| * - A good lump of memory mapped 0:0 by UTLB entry 0 | |
| * - MSR:IS & MSR:DS set to 0 | |
| * | |
| * Note that some of the above requirements will be relaxed in the future | |
| * as the kernel becomes smarter at dealing with different initial conditions | |
| * but for now you have to be careful | |
| */ | |
| _GLOBAL(start_initialization_book3e) | |
| mflr r28 | |
| /* First, we need to setup some initial TLBs to map the kernel | |
| * text, data and bss at PAGE_OFFSET. We don't have a real mode | |
| * and always use AS 0, so we just set it up to match our link | |
| * address and never use 0 based addresses. | |
| */ | |
| bl .initial_tlb_book3e | |
| /* Init global core bits */ | |
| bl .init_core_book3e | |
| /* Init per-thread bits */ | |
| bl .init_thread_book3e | |
| /* Return to common init code */ | |
| tovirt(r28,r28) | |
| mtlr r28 | |
| blr | |
| /* | |
| * Secondary core/processor entry | |
| * | |
| * This is entered for thread 0 of a secondary core, all other threads | |
| * are expected to be stopped. It's similar to start_initialization_book3e | |
| * except that it's generally entered from the holding loop in head_64.S | |
| * after CPUs have been gathered by Open Firmware. | |
| * | |
| * We assume we are in 32 bits mode running with whatever TLB entry was | |
| * set for us by the firmware or POR engine. | |
| */ | |
| _GLOBAL(book3e_secondary_core_init_tlb_set) | |
| li r4,1 | |
| b .generic_secondary_smp_init | |
| _GLOBAL(book3e_secondary_core_init) | |
| mflr r28 | |
| /* Do we need to setup initial TLB entry ? */ | |
| cmplwi r4,0 | |
| bne 2f | |
| /* Setup TLB for this core */ | |
| bl .initial_tlb_book3e | |
| /* We can return from the above running at a different | |
| * address, so recalculate r2 (TOC) | |
| */ | |
| bl .relative_toc | |
| /* Init global core bits */ | |
| 2: bl .init_core_book3e | |
| /* Init per-thread bits */ | |
| 3: bl .init_thread_book3e | |
| /* Return to common init code at proper virtual address. | |
| * | |
| * Due to various previous assumptions, we know we entered this | |
| * function at either the final PAGE_OFFSET mapping or using a | |
| * 1:1 mapping at 0, so we don't bother doing a complicated check | |
| * here, we just ensure the return address has the right top bits. | |
| * | |
| * Note that if we ever want to be smarter about where we can be | |
| * started from, we have to be careful that by the time we reach | |
| * the code below we may already be running at a different location | |
| * than the one we were called from since initial_tlb_book3e can | |
| * have moved us already. | |
| */ | |
| cmpdi cr0,r28,0 | |
| blt 1f | |
| lis r3,PAGE_OFFSET@highest | |
| sldi r3,r3,32 | |
| or r28,r28,r3 | |
| 1: mtlr r28 | |
| blr | |
| _GLOBAL(book3e_secondary_thread_init) | |
| mflr r28 | |
| b 3b | |
| _STATIC(init_core_book3e) | |
| /* Establish the interrupt vector base */ | |
| LOAD_REG_IMMEDIATE(r3, interrupt_base_book3e) | |
| mtspr SPRN_IVPR,r3 | |
| sync | |
| blr | |
| _STATIC(init_thread_book3e) | |
| lis r3,(SPRN_EPCR_ICM | SPRN_EPCR_GICM)@h | |
| mtspr SPRN_EPCR,r3 | |
| /* Make sure interrupts are off */ | |
| wrteei 0 | |
| /* disable all timers and clear out status */ | |
| li r3,0 | |
| mtspr SPRN_TCR,r3 | |
| mfspr r3,SPRN_TSR | |
| mtspr SPRN_TSR,r3 | |
| blr | |
| _GLOBAL(__setup_base_ivors) | |
| SET_IVOR(0, 0x020) /* Critical Input */ | |
| SET_IVOR(1, 0x000) /* Machine Check */ | |
| SET_IVOR(2, 0x060) /* Data Storage */ | |
| SET_IVOR(3, 0x080) /* Instruction Storage */ | |
| SET_IVOR(4, 0x0a0) /* External Input */ | |
| SET_IVOR(5, 0x0c0) /* Alignment */ | |
| SET_IVOR(6, 0x0e0) /* Program */ | |
| SET_IVOR(7, 0x100) /* FP Unavailable */ | |
| SET_IVOR(8, 0x120) /* System Call */ | |
| SET_IVOR(9, 0x140) /* Auxiliary Processor Unavailable */ | |
| SET_IVOR(10, 0x160) /* Decrementer */ | |
| SET_IVOR(11, 0x180) /* Fixed Interval Timer */ | |
| SET_IVOR(12, 0x1a0) /* Watchdog Timer */ | |
| SET_IVOR(13, 0x1c0) /* Data TLB Error */ | |
| SET_IVOR(14, 0x1e0) /* Instruction TLB Error */ | |
| SET_IVOR(15, 0x040) /* Debug */ | |
| sync | |
| blr | |
| _GLOBAL(setup_altivec_ivors) | |
| SET_IVOR(32, 0x200) /* AltiVec Unavailable */ | |
| SET_IVOR(33, 0x220) /* AltiVec Assist */ | |
| blr | |
| _GLOBAL(setup_perfmon_ivor) | |
| SET_IVOR(35, 0x260) /* Performance Monitor */ | |
| blr | |
| _GLOBAL(setup_doorbell_ivors) | |
| SET_IVOR(36, 0x280) /* Processor Doorbell */ | |
| SET_IVOR(37, 0x2a0) /* Processor Doorbell Crit */ | |
| blr | |
| _GLOBAL(setup_ehv_ivors) | |
| SET_IVOR(40, 0x300) /* Embedded Hypervisor System Call */ | |
| SET_IVOR(41, 0x320) /* Embedded Hypervisor Privilege */ | |
| SET_IVOR(38, 0x2c0) /* Guest Processor Doorbell */ | |
| SET_IVOR(39, 0x2e0) /* Guest Processor Doorbell Crit/MC */ | |
| blr | |
| _GLOBAL(setup_lrat_ivor) | |
| SET_IVOR(42, 0x340) /* LRAT Error */ | |
| blr |