| /* | |
| * PS/2 driver library | |
| * | |
| * Copyright (c) 1999-2002 Vojtech Pavlik | |
| * Copyright (c) 2004 Dmitry Torokhov | |
| */ | |
| /* | |
| * This program is free software; you can redistribute it and/or modify it | |
| * under the terms of the GNU General Public License version 2 as published by | |
| * the Free Software Foundation. | |
| */ | |
| #include <linux/delay.h> | |
| #include <linux/module.h> | |
| #include <linux/sched.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/input.h> | |
| #include <linux/serio.h> | |
| #include <linux/i8042.h> | |
| #include <linux/init.h> | |
| #include <linux/libps2.h> | |
| #define DRIVER_DESC "PS/2 driver library" | |
| MODULE_AUTHOR("Dmitry Torokhov <dtor@mail.ru>"); | |
| MODULE_DESCRIPTION("PS/2 driver library"); | |
| MODULE_LICENSE("GPL"); | |
| /* | |
| * ps2_sendbyte() sends a byte to the device and waits for acknowledge. | |
| * It doesn't handle retransmission, though it could - because if there | |
| * is a need for retransmissions device has to be replaced anyway. | |
| * | |
| * ps2_sendbyte() can only be called from a process context. | |
| */ | |
| int ps2_sendbyte(struct ps2dev *ps2dev, unsigned char byte, int timeout) | |
| { | |
| serio_pause_rx(ps2dev->serio); | |
| ps2dev->nak = 1; | |
| ps2dev->flags |= PS2_FLAG_ACK; | |
| serio_continue_rx(ps2dev->serio); | |
| if (serio_write(ps2dev->serio, byte) == 0) | |
| wait_event_timeout(ps2dev->wait, | |
| !(ps2dev->flags & PS2_FLAG_ACK), | |
| msecs_to_jiffies(timeout)); | |
| serio_pause_rx(ps2dev->serio); | |
| ps2dev->flags &= ~PS2_FLAG_ACK; | |
| serio_continue_rx(ps2dev->serio); | |
| return -ps2dev->nak; | |
| } | |
| EXPORT_SYMBOL(ps2_sendbyte); | |
| void ps2_begin_command(struct ps2dev *ps2dev) | |
| { | |
| mutex_lock(&ps2dev->cmd_mutex); | |
| if (i8042_check_port_owner(ps2dev->serio)) | |
| i8042_lock_chip(); | |
| } | |
| EXPORT_SYMBOL(ps2_begin_command); | |
| void ps2_end_command(struct ps2dev *ps2dev) | |
| { | |
| if (i8042_check_port_owner(ps2dev->serio)) | |
| i8042_unlock_chip(); | |
| mutex_unlock(&ps2dev->cmd_mutex); | |
| } | |
| EXPORT_SYMBOL(ps2_end_command); | |
| /* | |
| * ps2_drain() waits for device to transmit requested number of bytes | |
| * and discards them. | |
| */ | |
| void ps2_drain(struct ps2dev *ps2dev, int maxbytes, int timeout) | |
| { | |
| if (maxbytes > sizeof(ps2dev->cmdbuf)) { | |
| WARN_ON(1); | |
| maxbytes = sizeof(ps2dev->cmdbuf); | |
| } | |
| ps2_begin_command(ps2dev); | |
| serio_pause_rx(ps2dev->serio); | |
| ps2dev->flags = PS2_FLAG_CMD; | |
| ps2dev->cmdcnt = maxbytes; | |
| serio_continue_rx(ps2dev->serio); | |
| wait_event_timeout(ps2dev->wait, | |
| !(ps2dev->flags & PS2_FLAG_CMD), | |
| msecs_to_jiffies(timeout)); | |
| ps2_end_command(ps2dev); | |
| } | |
| EXPORT_SYMBOL(ps2_drain); | |
| /* | |
| * ps2_is_keyboard_id() checks received ID byte against the list of | |
| * known keyboard IDs. | |
| */ | |
| int ps2_is_keyboard_id(char id_byte) | |
| { | |
| static const char keyboard_ids[] = { | |
| 0xab, /* Regular keyboards */ | |
| 0xac, /* NCD Sun keyboard */ | |
| 0x2b, /* Trust keyboard, translated */ | |
| 0x5d, /* Trust keyboard */ | |
| 0x60, /* NMB SGI keyboard, translated */ | |
| 0x47, /* NMB SGI keyboard */ | |
| }; | |
| return memchr(keyboard_ids, id_byte, sizeof(keyboard_ids)) != NULL; | |
| } | |
| EXPORT_SYMBOL(ps2_is_keyboard_id); | |
| /* | |
| * ps2_adjust_timeout() is called after receiving 1st byte of command | |
| * response and tries to reduce remaining timeout to speed up command | |
| * completion. | |
| */ | |
| static int ps2_adjust_timeout(struct ps2dev *ps2dev, int command, int timeout) | |
| { | |
| switch (command) { | |
| case PS2_CMD_RESET_BAT: | |
| /* | |
| * Device has sent the first response byte after | |
| * reset command, reset is thus done, so we can | |
| * shorten the timeout. | |
| * The next byte will come soon (keyboard) or not | |
| * at all (mouse). | |
| */ | |
| if (timeout > msecs_to_jiffies(100)) | |
| timeout = msecs_to_jiffies(100); | |
| break; | |
| case PS2_CMD_GETID: | |
| /* | |
| * Microsoft Natural Elite keyboard responds to | |
| * the GET ID command as it were a mouse, with | |
| * a single byte. Fail the command so atkbd will | |
| * use alternative probe to detect it. | |
| */ | |
| if (ps2dev->cmdbuf[1] == 0xaa) { | |
| serio_pause_rx(ps2dev->serio); | |
| ps2dev->flags = 0; | |
| serio_continue_rx(ps2dev->serio); | |
| timeout = 0; | |
| } | |
| /* | |
| * If device behind the port is not a keyboard there | |
| * won't be 2nd byte of ID response. | |
| */ | |
| if (!ps2_is_keyboard_id(ps2dev->cmdbuf[1])) { | |
| serio_pause_rx(ps2dev->serio); | |
| ps2dev->flags = ps2dev->cmdcnt = 0; | |
| serio_continue_rx(ps2dev->serio); | |
| timeout = 0; | |
| } | |
| break; | |
| default: | |
| break; | |
| } | |
| return timeout; | |
| } | |
| /* | |
| * ps2_command() sends a command and its parameters to the mouse, | |
| * then waits for the response and puts it in the param array. | |
| * | |
| * ps2_command() can only be called from a process context | |
| */ | |
| int __ps2_command(struct ps2dev *ps2dev, unsigned char *param, int command) | |
| { | |
| int timeout; | |
| int send = (command >> 12) & 0xf; | |
| int receive = (command >> 8) & 0xf; | |
| int rc = -1; | |
| int i; | |
| if (receive > sizeof(ps2dev->cmdbuf)) { | |
| WARN_ON(1); | |
| return -1; | |
| } | |
| if (send && !param) { | |
| WARN_ON(1); | |
| return -1; | |
| } | |
| serio_pause_rx(ps2dev->serio); | |
| ps2dev->flags = command == PS2_CMD_GETID ? PS2_FLAG_WAITID : 0; | |
| ps2dev->cmdcnt = receive; | |
| if (receive && param) | |
| for (i = 0; i < receive; i++) | |
| ps2dev->cmdbuf[(receive - 1) - i] = param[i]; | |
| serio_continue_rx(ps2dev->serio); | |
| /* | |
| * Some devices (Synaptics) peform the reset before | |
| * ACKing the reset command, and so it can take a long | |
| * time before the ACK arrrives. | |
| */ | |
| if (ps2_sendbyte(ps2dev, command & 0xff, | |
| command == PS2_CMD_RESET_BAT ? 1000 : 200)) | |
| goto out; | |
| for (i = 0; i < send; i++) | |
| if (ps2_sendbyte(ps2dev, param[i], 200)) | |
| goto out; | |
| /* | |
| * The reset command takes a long time to execute. | |
| */ | |
| timeout = msecs_to_jiffies(command == PS2_CMD_RESET_BAT ? 4000 : 500); | |
| timeout = wait_event_timeout(ps2dev->wait, | |
| !(ps2dev->flags & PS2_FLAG_CMD1), timeout); | |
| if (ps2dev->cmdcnt && !(ps2dev->flags & PS2_FLAG_CMD1)) { | |
| timeout = ps2_adjust_timeout(ps2dev, command, timeout); | |
| wait_event_timeout(ps2dev->wait, | |
| !(ps2dev->flags & PS2_FLAG_CMD), timeout); | |
| } | |
| if (param) | |
| for (i = 0; i < receive; i++) | |
| param[i] = ps2dev->cmdbuf[(receive - 1) - i]; | |
| if (ps2dev->cmdcnt && (command != PS2_CMD_RESET_BAT || ps2dev->cmdcnt != 1)) | |
| goto out; | |
| rc = 0; | |
| out: | |
| serio_pause_rx(ps2dev->serio); | |
| ps2dev->flags = 0; | |
| serio_continue_rx(ps2dev->serio); | |
| return rc; | |
| } | |
| EXPORT_SYMBOL(__ps2_command); | |
| int ps2_command(struct ps2dev *ps2dev, unsigned char *param, int command) | |
| { | |
| int rc; | |
| ps2_begin_command(ps2dev); | |
| rc = __ps2_command(ps2dev, param, command); | |
| ps2_end_command(ps2dev); | |
| return rc; | |
| } | |
| EXPORT_SYMBOL(ps2_command); | |
| /* | |
| * ps2_init() initializes ps2dev structure | |
| */ | |
| void ps2_init(struct ps2dev *ps2dev, struct serio *serio) | |
| { | |
| mutex_init(&ps2dev->cmd_mutex); | |
| lockdep_set_subclass(&ps2dev->cmd_mutex, serio->depth); | |
| init_waitqueue_head(&ps2dev->wait); | |
| ps2dev->serio = serio; | |
| } | |
| EXPORT_SYMBOL(ps2_init); | |
| /* | |
| * ps2_handle_ack() is supposed to be used in interrupt handler | |
| * to properly process ACK/NAK of a command from a PS/2 device. | |
| */ | |
| int ps2_handle_ack(struct ps2dev *ps2dev, unsigned char data) | |
| { | |
| switch (data) { | |
| case PS2_RET_ACK: | |
| ps2dev->nak = 0; | |
| break; | |
| case PS2_RET_NAK: | |
| ps2dev->flags |= PS2_FLAG_NAK; | |
| ps2dev->nak = PS2_RET_NAK; | |
| break; | |
| case PS2_RET_ERR: | |
| if (ps2dev->flags & PS2_FLAG_NAK) { | |
| ps2dev->flags &= ~PS2_FLAG_NAK; | |
| ps2dev->nak = PS2_RET_ERR; | |
| break; | |
| } | |
| /* | |
| * Workaround for mice which don't ACK the Get ID command. | |
| * These are valid mouse IDs that we recognize. | |
| */ | |
| case 0x00: | |
| case 0x03: | |
| case 0x04: | |
| if (ps2dev->flags & PS2_FLAG_WAITID) { | |
| ps2dev->nak = 0; | |
| break; | |
| } | |
| /* Fall through */ | |
| default: | |
| return 0; | |
| } | |
| if (!ps2dev->nak) { | |
| ps2dev->flags &= ~PS2_FLAG_NAK; | |
| if (ps2dev->cmdcnt) | |
| ps2dev->flags |= PS2_FLAG_CMD | PS2_FLAG_CMD1; | |
| } | |
| ps2dev->flags &= ~PS2_FLAG_ACK; | |
| wake_up(&ps2dev->wait); | |
| if (data != PS2_RET_ACK) | |
| ps2_handle_response(ps2dev, data); | |
| return 1; | |
| } | |
| EXPORT_SYMBOL(ps2_handle_ack); | |
| /* | |
| * ps2_handle_response() is supposed to be used in interrupt handler | |
| * to properly store device's response to a command and notify process | |
| * waiting for completion of the command. | |
| */ | |
| int ps2_handle_response(struct ps2dev *ps2dev, unsigned char data) | |
| { | |
| if (ps2dev->cmdcnt) | |
| ps2dev->cmdbuf[--ps2dev->cmdcnt] = data; | |
| if (ps2dev->flags & PS2_FLAG_CMD1) { | |
| ps2dev->flags &= ~PS2_FLAG_CMD1; | |
| if (ps2dev->cmdcnt) | |
| wake_up(&ps2dev->wait); | |
| } | |
| if (!ps2dev->cmdcnt) { | |
| ps2dev->flags &= ~PS2_FLAG_CMD; | |
| wake_up(&ps2dev->wait); | |
| } | |
| return 1; | |
| } | |
| EXPORT_SYMBOL(ps2_handle_response); | |
| void ps2_cmd_aborted(struct ps2dev *ps2dev) | |
| { | |
| if (ps2dev->flags & PS2_FLAG_ACK) | |
| ps2dev->nak = 1; | |
| if (ps2dev->flags & (PS2_FLAG_ACK | PS2_FLAG_CMD)) | |
| wake_up(&ps2dev->wait); | |
| /* reset all flags except last nack */ | |
| ps2dev->flags &= PS2_FLAG_NAK; | |
| } | |
| EXPORT_SYMBOL(ps2_cmd_aborted); |