|  | /* | 
|  | * This is the linux wireless configuration interface. | 
|  | * | 
|  | * Copyright 2006-2009		Johannes Berg <johannes@sipsolutions.net> | 
|  | */ | 
|  |  | 
|  | #include <linux/if.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/err.h> | 
|  | #include <linux/list.h> | 
|  | #include <linux/nl80211.h> | 
|  | #include <linux/debugfs.h> | 
|  | #include <linux/notifier.h> | 
|  | #include <linux/device.h> | 
|  | #include <linux/etherdevice.h> | 
|  | #include <linux/rtnetlink.h> | 
|  | #include <linux/sched.h> | 
|  | #include <net/genetlink.h> | 
|  | #include <net/cfg80211.h> | 
|  | #include "nl80211.h" | 
|  | #include "core.h" | 
|  | #include "sysfs.h" | 
|  | #include "debugfs.h" | 
|  | #include "wext-compat.h" | 
|  | #include "ethtool.h" | 
|  |  | 
|  | /* name for sysfs, %d is appended */ | 
|  | #define PHY_NAME "phy" | 
|  |  | 
|  | MODULE_AUTHOR("Johannes Berg"); | 
|  | MODULE_LICENSE("GPL"); | 
|  | MODULE_DESCRIPTION("wireless configuration support"); | 
|  |  | 
|  | /* RCU might be appropriate here since we usually | 
|  | * only read the list, and that can happen quite | 
|  | * often because we need to do it for each command */ | 
|  | LIST_HEAD(cfg80211_rdev_list); | 
|  | int cfg80211_rdev_list_generation; | 
|  |  | 
|  | /* | 
|  | * This is used to protect the cfg80211_rdev_list | 
|  | */ | 
|  | DEFINE_MUTEX(cfg80211_mutex); | 
|  |  | 
|  | /* for debugfs */ | 
|  | static struct dentry *ieee80211_debugfs_dir; | 
|  |  | 
|  | /* for the cleanup, scan and event works */ | 
|  | struct workqueue_struct *cfg80211_wq; | 
|  |  | 
|  | /* requires cfg80211_mutex to be held! */ | 
|  | struct cfg80211_registered_device *cfg80211_rdev_by_wiphy_idx(int wiphy_idx) | 
|  | { | 
|  | struct cfg80211_registered_device *result = NULL, *rdev; | 
|  |  | 
|  | if (!wiphy_idx_valid(wiphy_idx)) | 
|  | return NULL; | 
|  |  | 
|  | assert_cfg80211_lock(); | 
|  |  | 
|  | list_for_each_entry(rdev, &cfg80211_rdev_list, list) { | 
|  | if (rdev->wiphy_idx == wiphy_idx) { | 
|  | result = rdev; | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | return result; | 
|  | } | 
|  |  | 
|  | int get_wiphy_idx(struct wiphy *wiphy) | 
|  | { | 
|  | struct cfg80211_registered_device *rdev; | 
|  | if (!wiphy) | 
|  | return WIPHY_IDX_STALE; | 
|  | rdev = wiphy_to_dev(wiphy); | 
|  | return rdev->wiphy_idx; | 
|  | } | 
|  |  | 
|  | /* requires cfg80211_rdev_mutex to be held! */ | 
|  | struct wiphy *wiphy_idx_to_wiphy(int wiphy_idx) | 
|  | { | 
|  | struct cfg80211_registered_device *rdev; | 
|  |  | 
|  | if (!wiphy_idx_valid(wiphy_idx)) | 
|  | return NULL; | 
|  |  | 
|  | assert_cfg80211_lock(); | 
|  |  | 
|  | rdev = cfg80211_rdev_by_wiphy_idx(wiphy_idx); | 
|  | if (!rdev) | 
|  | return NULL; | 
|  | return &rdev->wiphy; | 
|  | } | 
|  |  | 
|  | /* requires cfg80211_mutex to be held! */ | 
|  | struct cfg80211_registered_device * | 
|  | __cfg80211_rdev_from_info(struct genl_info *info) | 
|  | { | 
|  | int ifindex; | 
|  | struct cfg80211_registered_device *bywiphyidx = NULL, *byifidx = NULL; | 
|  | struct net_device *dev; | 
|  | int err = -EINVAL; | 
|  |  | 
|  | assert_cfg80211_lock(); | 
|  |  | 
|  | if (info->attrs[NL80211_ATTR_WIPHY]) { | 
|  | bywiphyidx = cfg80211_rdev_by_wiphy_idx( | 
|  | nla_get_u32(info->attrs[NL80211_ATTR_WIPHY])); | 
|  | err = -ENODEV; | 
|  | } | 
|  |  | 
|  | if (info->attrs[NL80211_ATTR_IFINDEX]) { | 
|  | ifindex = nla_get_u32(info->attrs[NL80211_ATTR_IFINDEX]); | 
|  | dev = dev_get_by_index(genl_info_net(info), ifindex); | 
|  | if (dev) { | 
|  | if (dev->ieee80211_ptr) | 
|  | byifidx = | 
|  | wiphy_to_dev(dev->ieee80211_ptr->wiphy); | 
|  | dev_put(dev); | 
|  | } | 
|  | err = -ENODEV; | 
|  | } | 
|  |  | 
|  | if (bywiphyidx && byifidx) { | 
|  | if (bywiphyidx != byifidx) | 
|  | return ERR_PTR(-EINVAL); | 
|  | else | 
|  | return bywiphyidx; /* == byifidx */ | 
|  | } | 
|  | if (bywiphyidx) | 
|  | return bywiphyidx; | 
|  |  | 
|  | if (byifidx) | 
|  | return byifidx; | 
|  |  | 
|  | return ERR_PTR(err); | 
|  | } | 
|  |  | 
|  | struct cfg80211_registered_device * | 
|  | cfg80211_get_dev_from_info(struct genl_info *info) | 
|  | { | 
|  | struct cfg80211_registered_device *rdev; | 
|  |  | 
|  | mutex_lock(&cfg80211_mutex); | 
|  | rdev = __cfg80211_rdev_from_info(info); | 
|  |  | 
|  | /* if it is not an error we grab the lock on | 
|  | * it to assure it won't be going away while | 
|  | * we operate on it */ | 
|  | if (!IS_ERR(rdev)) | 
|  | mutex_lock(&rdev->mtx); | 
|  |  | 
|  | mutex_unlock(&cfg80211_mutex); | 
|  |  | 
|  | return rdev; | 
|  | } | 
|  |  | 
|  | struct cfg80211_registered_device * | 
|  | cfg80211_get_dev_from_ifindex(struct net *net, int ifindex) | 
|  | { | 
|  | struct cfg80211_registered_device *rdev = ERR_PTR(-ENODEV); | 
|  | struct net_device *dev; | 
|  |  | 
|  | mutex_lock(&cfg80211_mutex); | 
|  | dev = dev_get_by_index(net, ifindex); | 
|  | if (!dev) | 
|  | goto out; | 
|  | if (dev->ieee80211_ptr) { | 
|  | rdev = wiphy_to_dev(dev->ieee80211_ptr->wiphy); | 
|  | mutex_lock(&rdev->mtx); | 
|  | } else | 
|  | rdev = ERR_PTR(-ENODEV); | 
|  | dev_put(dev); | 
|  | out: | 
|  | mutex_unlock(&cfg80211_mutex); | 
|  | return rdev; | 
|  | } | 
|  |  | 
|  | /* requires cfg80211_mutex to be held */ | 
|  | int cfg80211_dev_rename(struct cfg80211_registered_device *rdev, | 
|  | char *newname) | 
|  | { | 
|  | struct cfg80211_registered_device *rdev2; | 
|  | int wiphy_idx, taken = -1, result, digits; | 
|  |  | 
|  | assert_cfg80211_lock(); | 
|  |  | 
|  | /* prohibit calling the thing phy%d when %d is not its number */ | 
|  | sscanf(newname, PHY_NAME "%d%n", &wiphy_idx, &taken); | 
|  | if (taken == strlen(newname) && wiphy_idx != rdev->wiphy_idx) { | 
|  | /* count number of places needed to print wiphy_idx */ | 
|  | digits = 1; | 
|  | while (wiphy_idx /= 10) | 
|  | digits++; | 
|  | /* | 
|  | * deny the name if it is phy<idx> where <idx> is printed | 
|  | * without leading zeroes. taken == strlen(newname) here | 
|  | */ | 
|  | if (taken == strlen(PHY_NAME) + digits) | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  |  | 
|  | /* Ignore nop renames */ | 
|  | if (strcmp(newname, dev_name(&rdev->wiphy.dev)) == 0) | 
|  | return 0; | 
|  |  | 
|  | /* Ensure another device does not already have this name. */ | 
|  | list_for_each_entry(rdev2, &cfg80211_rdev_list, list) | 
|  | if (strcmp(newname, dev_name(&rdev2->wiphy.dev)) == 0) | 
|  | return -EINVAL; | 
|  |  | 
|  | result = device_rename(&rdev->wiphy.dev, newname); | 
|  | if (result) | 
|  | return result; | 
|  |  | 
|  | if (rdev->wiphy.debugfsdir && | 
|  | !debugfs_rename(rdev->wiphy.debugfsdir->d_parent, | 
|  | rdev->wiphy.debugfsdir, | 
|  | rdev->wiphy.debugfsdir->d_parent, | 
|  | newname)) | 
|  | printk(KERN_ERR "cfg80211: failed to rename debugfs dir to %s!\n", | 
|  | newname); | 
|  |  | 
|  | nl80211_notify_dev_rename(rdev); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int cfg80211_switch_netns(struct cfg80211_registered_device *rdev, | 
|  | struct net *net) | 
|  | { | 
|  | struct wireless_dev *wdev; | 
|  | int err = 0; | 
|  |  | 
|  | if (!(rdev->wiphy.flags & WIPHY_FLAG_NETNS_OK)) | 
|  | return -EOPNOTSUPP; | 
|  |  | 
|  | list_for_each_entry(wdev, &rdev->netdev_list, list) { | 
|  | wdev->netdev->features &= ~NETIF_F_NETNS_LOCAL; | 
|  | err = dev_change_net_namespace(wdev->netdev, net, "wlan%d"); | 
|  | if (err) | 
|  | break; | 
|  | wdev->netdev->features |= NETIF_F_NETNS_LOCAL; | 
|  | } | 
|  |  | 
|  | if (err) { | 
|  | /* failed -- clean up to old netns */ | 
|  | net = wiphy_net(&rdev->wiphy); | 
|  |  | 
|  | list_for_each_entry_continue_reverse(wdev, &rdev->netdev_list, | 
|  | list) { | 
|  | wdev->netdev->features &= ~NETIF_F_NETNS_LOCAL; | 
|  | err = dev_change_net_namespace(wdev->netdev, net, | 
|  | "wlan%d"); | 
|  | WARN_ON(err); | 
|  | wdev->netdev->features |= NETIF_F_NETNS_LOCAL; | 
|  | } | 
|  | } | 
|  |  | 
|  | wiphy_net_set(&rdev->wiphy, net); | 
|  |  | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static void cfg80211_rfkill_poll(struct rfkill *rfkill, void *data) | 
|  | { | 
|  | struct cfg80211_registered_device *rdev = data; | 
|  |  | 
|  | rdev->ops->rfkill_poll(&rdev->wiphy); | 
|  | } | 
|  |  | 
|  | static int cfg80211_rfkill_set_block(void *data, bool blocked) | 
|  | { | 
|  | struct cfg80211_registered_device *rdev = data; | 
|  | struct wireless_dev *wdev; | 
|  |  | 
|  | if (!blocked) | 
|  | return 0; | 
|  |  | 
|  | rtnl_lock(); | 
|  | mutex_lock(&rdev->devlist_mtx); | 
|  |  | 
|  | list_for_each_entry(wdev, &rdev->netdev_list, list) | 
|  | dev_close(wdev->netdev); | 
|  |  | 
|  | mutex_unlock(&rdev->devlist_mtx); | 
|  | rtnl_unlock(); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void cfg80211_rfkill_sync_work(struct work_struct *work) | 
|  | { | 
|  | struct cfg80211_registered_device *rdev; | 
|  |  | 
|  | rdev = container_of(work, struct cfg80211_registered_device, rfkill_sync); | 
|  | cfg80211_rfkill_set_block(rdev, rfkill_blocked(rdev->rfkill)); | 
|  | } | 
|  |  | 
|  | static void cfg80211_event_work(struct work_struct *work) | 
|  | { | 
|  | struct cfg80211_registered_device *rdev; | 
|  |  | 
|  | rdev = container_of(work, struct cfg80211_registered_device, | 
|  | event_work); | 
|  |  | 
|  | rtnl_lock(); | 
|  | cfg80211_lock_rdev(rdev); | 
|  |  | 
|  | cfg80211_process_rdev_events(rdev); | 
|  | cfg80211_unlock_rdev(rdev); | 
|  | rtnl_unlock(); | 
|  | } | 
|  |  | 
|  | /* exported functions */ | 
|  |  | 
|  | struct wiphy *wiphy_new(const struct cfg80211_ops *ops, int sizeof_priv) | 
|  | { | 
|  | static int wiphy_counter; | 
|  |  | 
|  | struct cfg80211_registered_device *rdev; | 
|  | int alloc_size; | 
|  |  | 
|  | WARN_ON(ops->add_key && (!ops->del_key || !ops->set_default_key)); | 
|  | WARN_ON(ops->auth && (!ops->assoc || !ops->deauth || !ops->disassoc)); | 
|  | WARN_ON(ops->connect && !ops->disconnect); | 
|  | WARN_ON(ops->join_ibss && !ops->leave_ibss); | 
|  | WARN_ON(ops->add_virtual_intf && !ops->del_virtual_intf); | 
|  | WARN_ON(ops->add_station && !ops->del_station); | 
|  | WARN_ON(ops->add_mpath && !ops->del_mpath); | 
|  |  | 
|  | alloc_size = sizeof(*rdev) + sizeof_priv; | 
|  |  | 
|  | rdev = kzalloc(alloc_size, GFP_KERNEL); | 
|  | if (!rdev) | 
|  | return NULL; | 
|  |  | 
|  | rdev->ops = ops; | 
|  |  | 
|  | mutex_lock(&cfg80211_mutex); | 
|  |  | 
|  | rdev->wiphy_idx = wiphy_counter++; | 
|  |  | 
|  | if (unlikely(!wiphy_idx_valid(rdev->wiphy_idx))) { | 
|  | wiphy_counter--; | 
|  | mutex_unlock(&cfg80211_mutex); | 
|  | /* ugh, wrapped! */ | 
|  | kfree(rdev); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | mutex_unlock(&cfg80211_mutex); | 
|  |  | 
|  | /* give it a proper name */ | 
|  | dev_set_name(&rdev->wiphy.dev, PHY_NAME "%d", rdev->wiphy_idx); | 
|  |  | 
|  | mutex_init(&rdev->mtx); | 
|  | mutex_init(&rdev->devlist_mtx); | 
|  | INIT_LIST_HEAD(&rdev->netdev_list); | 
|  | spin_lock_init(&rdev->bss_lock); | 
|  | INIT_LIST_HEAD(&rdev->bss_list); | 
|  | INIT_WORK(&rdev->scan_done_wk, __cfg80211_scan_done); | 
|  |  | 
|  | #ifdef CONFIG_CFG80211_WEXT | 
|  | rdev->wiphy.wext = &cfg80211_wext_handler; | 
|  | #endif | 
|  |  | 
|  | device_initialize(&rdev->wiphy.dev); | 
|  | rdev->wiphy.dev.class = &ieee80211_class; | 
|  | rdev->wiphy.dev.platform_data = rdev; | 
|  |  | 
|  | #ifdef CONFIG_CFG80211_DEFAULT_PS | 
|  | rdev->wiphy.flags |= WIPHY_FLAG_PS_ON_BY_DEFAULT; | 
|  | #endif | 
|  |  | 
|  | wiphy_net_set(&rdev->wiphy, &init_net); | 
|  |  | 
|  | rdev->rfkill_ops.set_block = cfg80211_rfkill_set_block; | 
|  | rdev->rfkill = rfkill_alloc(dev_name(&rdev->wiphy.dev), | 
|  | &rdev->wiphy.dev, RFKILL_TYPE_WLAN, | 
|  | &rdev->rfkill_ops, rdev); | 
|  |  | 
|  | if (!rdev->rfkill) { | 
|  | kfree(rdev); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | INIT_WORK(&rdev->rfkill_sync, cfg80211_rfkill_sync_work); | 
|  | INIT_WORK(&rdev->conn_work, cfg80211_conn_work); | 
|  | INIT_WORK(&rdev->event_work, cfg80211_event_work); | 
|  |  | 
|  | init_waitqueue_head(&rdev->dev_wait); | 
|  |  | 
|  | /* | 
|  | * Initialize wiphy parameters to IEEE 802.11 MIB default values. | 
|  | * Fragmentation and RTS threshold are disabled by default with the | 
|  | * special -1 value. | 
|  | */ | 
|  | rdev->wiphy.retry_short = 7; | 
|  | rdev->wiphy.retry_long = 4; | 
|  | rdev->wiphy.frag_threshold = (u32) -1; | 
|  | rdev->wiphy.rts_threshold = (u32) -1; | 
|  |  | 
|  | return &rdev->wiphy; | 
|  | } | 
|  | EXPORT_SYMBOL(wiphy_new); | 
|  |  | 
|  | int wiphy_register(struct wiphy *wiphy) | 
|  | { | 
|  | struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy); | 
|  | int res; | 
|  | enum ieee80211_band band; | 
|  | struct ieee80211_supported_band *sband; | 
|  | bool have_band = false; | 
|  | int i; | 
|  | u16 ifmodes = wiphy->interface_modes; | 
|  |  | 
|  | /* sanity check ifmodes */ | 
|  | WARN_ON(!ifmodes); | 
|  | ifmodes &= ((1 << __NL80211_IFTYPE_AFTER_LAST) - 1) & ~1; | 
|  | if (WARN_ON(ifmodes != wiphy->interface_modes)) | 
|  | wiphy->interface_modes = ifmodes; | 
|  |  | 
|  | /* sanity check supported bands/channels */ | 
|  | for (band = 0; band < IEEE80211_NUM_BANDS; band++) { | 
|  | sband = wiphy->bands[band]; | 
|  | if (!sband) | 
|  | continue; | 
|  |  | 
|  | sband->band = band; | 
|  |  | 
|  | if (WARN_ON(!sband->n_channels || !sband->n_bitrates)) | 
|  | return -EINVAL; | 
|  |  | 
|  | /* | 
|  | * Since we use a u32 for rate bitmaps in | 
|  | * ieee80211_get_response_rate, we cannot | 
|  | * have more than 32 legacy rates. | 
|  | */ | 
|  | if (WARN_ON(sband->n_bitrates > 32)) | 
|  | return -EINVAL; | 
|  |  | 
|  | for (i = 0; i < sband->n_channels; i++) { | 
|  | sband->channels[i].orig_flags = | 
|  | sband->channels[i].flags; | 
|  | sband->channels[i].orig_mag = | 
|  | sband->channels[i].max_antenna_gain; | 
|  | sband->channels[i].orig_mpwr = | 
|  | sband->channels[i].max_power; | 
|  | sband->channels[i].band = band; | 
|  | } | 
|  |  | 
|  | have_band = true; | 
|  | } | 
|  |  | 
|  | if (!have_band) { | 
|  | WARN_ON(1); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | /* check and set up bitrates */ | 
|  | ieee80211_set_bitrate_flags(wiphy); | 
|  |  | 
|  | res = device_add(&rdev->wiphy.dev); | 
|  | if (res) | 
|  | return res; | 
|  |  | 
|  | res = rfkill_register(rdev->rfkill); | 
|  | if (res) | 
|  | goto out_rm_dev; | 
|  |  | 
|  | mutex_lock(&cfg80211_mutex); | 
|  |  | 
|  | /* set up regulatory info */ | 
|  | wiphy_update_regulatory(wiphy, NL80211_REGDOM_SET_BY_CORE); | 
|  |  | 
|  | list_add(&rdev->list, &cfg80211_rdev_list); | 
|  | cfg80211_rdev_list_generation++; | 
|  |  | 
|  | mutex_unlock(&cfg80211_mutex); | 
|  |  | 
|  | /* add to debugfs */ | 
|  | rdev->wiphy.debugfsdir = | 
|  | debugfs_create_dir(wiphy_name(&rdev->wiphy), | 
|  | ieee80211_debugfs_dir); | 
|  | if (IS_ERR(rdev->wiphy.debugfsdir)) | 
|  | rdev->wiphy.debugfsdir = NULL; | 
|  |  | 
|  | if (wiphy->flags & WIPHY_FLAG_CUSTOM_REGULATORY) { | 
|  | struct regulatory_request request; | 
|  |  | 
|  | request.wiphy_idx = get_wiphy_idx(wiphy); | 
|  | request.initiator = NL80211_REGDOM_SET_BY_DRIVER; | 
|  | request.alpha2[0] = '9'; | 
|  | request.alpha2[1] = '9'; | 
|  |  | 
|  | nl80211_send_reg_change_event(&request); | 
|  | } | 
|  |  | 
|  | cfg80211_debugfs_rdev_add(rdev); | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | out_rm_dev: | 
|  | device_del(&rdev->wiphy.dev); | 
|  | return res; | 
|  | } | 
|  | EXPORT_SYMBOL(wiphy_register); | 
|  |  | 
|  | void wiphy_rfkill_start_polling(struct wiphy *wiphy) | 
|  | { | 
|  | struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy); | 
|  |  | 
|  | if (!rdev->ops->rfkill_poll) | 
|  | return; | 
|  | rdev->rfkill_ops.poll = cfg80211_rfkill_poll; | 
|  | rfkill_resume_polling(rdev->rfkill); | 
|  | } | 
|  | EXPORT_SYMBOL(wiphy_rfkill_start_polling); | 
|  |  | 
|  | void wiphy_rfkill_stop_polling(struct wiphy *wiphy) | 
|  | { | 
|  | struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy); | 
|  |  | 
|  | rfkill_pause_polling(rdev->rfkill); | 
|  | } | 
|  | EXPORT_SYMBOL(wiphy_rfkill_stop_polling); | 
|  |  | 
|  | void wiphy_unregister(struct wiphy *wiphy) | 
|  | { | 
|  | struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy); | 
|  |  | 
|  | rfkill_unregister(rdev->rfkill); | 
|  |  | 
|  | /* protect the device list */ | 
|  | mutex_lock(&cfg80211_mutex); | 
|  |  | 
|  | wait_event(rdev->dev_wait, ({ | 
|  | int __count; | 
|  | mutex_lock(&rdev->devlist_mtx); | 
|  | __count = rdev->opencount; | 
|  | mutex_unlock(&rdev->devlist_mtx); | 
|  | __count == 0;})); | 
|  |  | 
|  | mutex_lock(&rdev->devlist_mtx); | 
|  | BUG_ON(!list_empty(&rdev->netdev_list)); | 
|  | mutex_unlock(&rdev->devlist_mtx); | 
|  |  | 
|  | /* | 
|  | * First remove the hardware from everywhere, this makes | 
|  | * it impossible to find from userspace. | 
|  | */ | 
|  | debugfs_remove_recursive(rdev->wiphy.debugfsdir); | 
|  | list_del(&rdev->list); | 
|  |  | 
|  | /* | 
|  | * Try to grab rdev->mtx. If a command is still in progress, | 
|  | * hopefully the driver will refuse it since it's tearing | 
|  | * down the device already. We wait for this command to complete | 
|  | * before unlinking the item from the list. | 
|  | * Note: as codified by the BUG_ON above we cannot get here if | 
|  | * a virtual interface is still present. Hence, we can only get | 
|  | * to lock contention here if userspace issues a command that | 
|  | * identified the hardware by wiphy index. | 
|  | */ | 
|  | cfg80211_lock_rdev(rdev); | 
|  | /* nothing */ | 
|  | cfg80211_unlock_rdev(rdev); | 
|  |  | 
|  | /* If this device got a regulatory hint tell core its | 
|  | * free to listen now to a new shiny device regulatory hint */ | 
|  | reg_device_remove(wiphy); | 
|  |  | 
|  | cfg80211_rdev_list_generation++; | 
|  | device_del(&rdev->wiphy.dev); | 
|  |  | 
|  | mutex_unlock(&cfg80211_mutex); | 
|  |  | 
|  | flush_work(&rdev->scan_done_wk); | 
|  | cancel_work_sync(&rdev->conn_work); | 
|  | flush_work(&rdev->event_work); | 
|  | } | 
|  | EXPORT_SYMBOL(wiphy_unregister); | 
|  |  | 
|  | void cfg80211_dev_free(struct cfg80211_registered_device *rdev) | 
|  | { | 
|  | struct cfg80211_internal_bss *scan, *tmp; | 
|  | rfkill_destroy(rdev->rfkill); | 
|  | mutex_destroy(&rdev->mtx); | 
|  | mutex_destroy(&rdev->devlist_mtx); | 
|  | list_for_each_entry_safe(scan, tmp, &rdev->bss_list, list) | 
|  | cfg80211_put_bss(&scan->pub); | 
|  | kfree(rdev); | 
|  | } | 
|  |  | 
|  | void wiphy_free(struct wiphy *wiphy) | 
|  | { | 
|  | put_device(&wiphy->dev); | 
|  | } | 
|  | EXPORT_SYMBOL(wiphy_free); | 
|  |  | 
|  | void wiphy_rfkill_set_hw_state(struct wiphy *wiphy, bool blocked) | 
|  | { | 
|  | struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy); | 
|  |  | 
|  | if (rfkill_set_hw_state(rdev->rfkill, blocked)) | 
|  | schedule_work(&rdev->rfkill_sync); | 
|  | } | 
|  | EXPORT_SYMBOL(wiphy_rfkill_set_hw_state); | 
|  |  | 
|  | static void wdev_cleanup_work(struct work_struct *work) | 
|  | { | 
|  | struct wireless_dev *wdev; | 
|  | struct cfg80211_registered_device *rdev; | 
|  |  | 
|  | wdev = container_of(work, struct wireless_dev, cleanup_work); | 
|  | rdev = wiphy_to_dev(wdev->wiphy); | 
|  |  | 
|  | cfg80211_lock_rdev(rdev); | 
|  |  | 
|  | if (WARN_ON(rdev->scan_req && rdev->scan_req->dev == wdev->netdev)) { | 
|  | rdev->scan_req->aborted = true; | 
|  | ___cfg80211_scan_done(rdev, true); | 
|  | } | 
|  |  | 
|  | cfg80211_unlock_rdev(rdev); | 
|  |  | 
|  | mutex_lock(&rdev->devlist_mtx); | 
|  | rdev->opencount--; | 
|  | mutex_unlock(&rdev->devlist_mtx); | 
|  | wake_up(&rdev->dev_wait); | 
|  |  | 
|  | dev_put(wdev->netdev); | 
|  | } | 
|  |  | 
|  | static struct device_type wiphy_type = { | 
|  | .name	= "wlan", | 
|  | }; | 
|  |  | 
|  | static int cfg80211_netdev_notifier_call(struct notifier_block * nb, | 
|  | unsigned long state, | 
|  | void *ndev) | 
|  | { | 
|  | struct net_device *dev = ndev; | 
|  | struct wireless_dev *wdev = dev->ieee80211_ptr; | 
|  | struct cfg80211_registered_device *rdev; | 
|  |  | 
|  | if (!wdev) | 
|  | return NOTIFY_DONE; | 
|  |  | 
|  | rdev = wiphy_to_dev(wdev->wiphy); | 
|  |  | 
|  | WARN_ON(wdev->iftype == NL80211_IFTYPE_UNSPECIFIED); | 
|  |  | 
|  | switch (state) { | 
|  | case NETDEV_POST_INIT: | 
|  | SET_NETDEV_DEVTYPE(dev, &wiphy_type); | 
|  | break; | 
|  | case NETDEV_REGISTER: | 
|  | /* | 
|  | * NB: cannot take rdev->mtx here because this may be | 
|  | * called within code protected by it when interfaces | 
|  | * are added with nl80211. | 
|  | */ | 
|  | mutex_init(&wdev->mtx); | 
|  | INIT_WORK(&wdev->cleanup_work, wdev_cleanup_work); | 
|  | INIT_LIST_HEAD(&wdev->event_list); | 
|  | spin_lock_init(&wdev->event_lock); | 
|  | mutex_lock(&rdev->devlist_mtx); | 
|  | list_add(&wdev->list, &rdev->netdev_list); | 
|  | rdev->devlist_generation++; | 
|  | /* can only change netns with wiphy */ | 
|  | dev->features |= NETIF_F_NETNS_LOCAL; | 
|  |  | 
|  | if (sysfs_create_link(&dev->dev.kobj, &rdev->wiphy.dev.kobj, | 
|  | "phy80211")) { | 
|  | printk(KERN_ERR "wireless: failed to add phy80211 " | 
|  | "symlink to netdev!\n"); | 
|  | } | 
|  | wdev->netdev = dev; | 
|  | wdev->sme_state = CFG80211_SME_IDLE; | 
|  | mutex_unlock(&rdev->devlist_mtx); | 
|  | #ifdef CONFIG_CFG80211_WEXT | 
|  | wdev->wext.default_key = -1; | 
|  | wdev->wext.default_mgmt_key = -1; | 
|  | wdev->wext.connect.auth_type = NL80211_AUTHTYPE_AUTOMATIC; | 
|  | if (wdev->wiphy->flags & WIPHY_FLAG_PS_ON_BY_DEFAULT) | 
|  | wdev->wext.ps = true; | 
|  | else | 
|  | wdev->wext.ps = false; | 
|  | wdev->wext.ps_timeout = 100; | 
|  | if (rdev->ops->set_power_mgmt) | 
|  | if (rdev->ops->set_power_mgmt(wdev->wiphy, dev, | 
|  | wdev->wext.ps, | 
|  | wdev->wext.ps_timeout)) { | 
|  | /* assume this means it's off */ | 
|  | wdev->wext.ps = false; | 
|  | } | 
|  | #endif | 
|  | if (!dev->ethtool_ops) | 
|  | dev->ethtool_ops = &cfg80211_ethtool_ops; | 
|  |  | 
|  | if ((wdev->iftype == NL80211_IFTYPE_STATION || | 
|  | wdev->iftype == NL80211_IFTYPE_ADHOC) && !wdev->use_4addr) | 
|  | dev->priv_flags |= IFF_DONT_BRIDGE; | 
|  | break; | 
|  | case NETDEV_GOING_DOWN: | 
|  | switch (wdev->iftype) { | 
|  | case NL80211_IFTYPE_ADHOC: | 
|  | cfg80211_leave_ibss(rdev, dev, true); | 
|  | break; | 
|  | case NL80211_IFTYPE_STATION: | 
|  | wdev_lock(wdev); | 
|  | #ifdef CONFIG_CFG80211_WEXT | 
|  | kfree(wdev->wext.ie); | 
|  | wdev->wext.ie = NULL; | 
|  | wdev->wext.ie_len = 0; | 
|  | wdev->wext.connect.auth_type = NL80211_AUTHTYPE_AUTOMATIC; | 
|  | #endif | 
|  | __cfg80211_disconnect(rdev, dev, | 
|  | WLAN_REASON_DEAUTH_LEAVING, true); | 
|  | cfg80211_mlme_down(rdev, dev); | 
|  | wdev_unlock(wdev); | 
|  | break; | 
|  | default: | 
|  | break; | 
|  | } | 
|  | break; | 
|  | case NETDEV_DOWN: | 
|  | dev_hold(dev); | 
|  | queue_work(cfg80211_wq, &wdev->cleanup_work); | 
|  | break; | 
|  | case NETDEV_UP: | 
|  | /* | 
|  | * If we have a really quick DOWN/UP succession we may | 
|  | * have this work still pending ... cancel it and see | 
|  | * if it was pending, in which case we need to account | 
|  | * for some of the work it would have done. | 
|  | */ | 
|  | if (cancel_work_sync(&wdev->cleanup_work)) { | 
|  | mutex_lock(&rdev->devlist_mtx); | 
|  | rdev->opencount--; | 
|  | mutex_unlock(&rdev->devlist_mtx); | 
|  | dev_put(dev); | 
|  | } | 
|  | cfg80211_lock_rdev(rdev); | 
|  | mutex_lock(&rdev->devlist_mtx); | 
|  | #ifdef CONFIG_CFG80211_WEXT | 
|  | wdev_lock(wdev); | 
|  | switch (wdev->iftype) { | 
|  | case NL80211_IFTYPE_ADHOC: | 
|  | cfg80211_ibss_wext_join(rdev, wdev); | 
|  | break; | 
|  | case NL80211_IFTYPE_STATION: | 
|  | cfg80211_mgd_wext_connect(rdev, wdev); | 
|  | break; | 
|  | default: | 
|  | break; | 
|  | } | 
|  | wdev_unlock(wdev); | 
|  | #endif | 
|  | rdev->opencount++; | 
|  | mutex_unlock(&rdev->devlist_mtx); | 
|  | cfg80211_unlock_rdev(rdev); | 
|  | break; | 
|  | case NETDEV_UNREGISTER: | 
|  | /* | 
|  | * NB: cannot take rdev->mtx here because this may be | 
|  | * called within code protected by it when interfaces | 
|  | * are removed with nl80211. | 
|  | */ | 
|  | mutex_lock(&rdev->devlist_mtx); | 
|  | /* | 
|  | * It is possible to get NETDEV_UNREGISTER | 
|  | * multiple times. To detect that, check | 
|  | * that the interface is still on the list | 
|  | * of registered interfaces, and only then | 
|  | * remove and clean it up. | 
|  | */ | 
|  | if (!list_empty(&wdev->list)) { | 
|  | sysfs_remove_link(&dev->dev.kobj, "phy80211"); | 
|  | list_del_init(&wdev->list); | 
|  | rdev->devlist_generation++; | 
|  | #ifdef CONFIG_CFG80211_WEXT | 
|  | kfree(wdev->wext.keys); | 
|  | #endif | 
|  | } | 
|  | mutex_unlock(&rdev->devlist_mtx); | 
|  | break; | 
|  | case NETDEV_PRE_UP: | 
|  | if (!(wdev->wiphy->interface_modes & BIT(wdev->iftype))) | 
|  | return notifier_from_errno(-EOPNOTSUPP); | 
|  | if (rfkill_blocked(rdev->rfkill)) | 
|  | return notifier_from_errno(-ERFKILL); | 
|  | break; | 
|  | } | 
|  |  | 
|  | return NOTIFY_DONE; | 
|  | } | 
|  |  | 
|  | static struct notifier_block cfg80211_netdev_notifier = { | 
|  | .notifier_call = cfg80211_netdev_notifier_call, | 
|  | }; | 
|  |  | 
|  | static void __net_exit cfg80211_pernet_exit(struct net *net) | 
|  | { | 
|  | struct cfg80211_registered_device *rdev; | 
|  |  | 
|  | rtnl_lock(); | 
|  | mutex_lock(&cfg80211_mutex); | 
|  | list_for_each_entry(rdev, &cfg80211_rdev_list, list) { | 
|  | if (net_eq(wiphy_net(&rdev->wiphy), net)) | 
|  | WARN_ON(cfg80211_switch_netns(rdev, &init_net)); | 
|  | } | 
|  | mutex_unlock(&cfg80211_mutex); | 
|  | rtnl_unlock(); | 
|  | } | 
|  |  | 
|  | static struct pernet_operations cfg80211_pernet_ops = { | 
|  | .exit = cfg80211_pernet_exit, | 
|  | }; | 
|  |  | 
|  | static int __init cfg80211_init(void) | 
|  | { | 
|  | int err; | 
|  |  | 
|  | err = register_pernet_device(&cfg80211_pernet_ops); | 
|  | if (err) | 
|  | goto out_fail_pernet; | 
|  |  | 
|  | err = wiphy_sysfs_init(); | 
|  | if (err) | 
|  | goto out_fail_sysfs; | 
|  |  | 
|  | err = register_netdevice_notifier(&cfg80211_netdev_notifier); | 
|  | if (err) | 
|  | goto out_fail_notifier; | 
|  |  | 
|  | err = nl80211_init(); | 
|  | if (err) | 
|  | goto out_fail_nl80211; | 
|  |  | 
|  | ieee80211_debugfs_dir = debugfs_create_dir("ieee80211", NULL); | 
|  |  | 
|  | err = regulatory_init(); | 
|  | if (err) | 
|  | goto out_fail_reg; | 
|  |  | 
|  | cfg80211_wq = create_singlethread_workqueue("cfg80211"); | 
|  | if (!cfg80211_wq) | 
|  | goto out_fail_wq; | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | out_fail_wq: | 
|  | regulatory_exit(); | 
|  | out_fail_reg: | 
|  | debugfs_remove(ieee80211_debugfs_dir); | 
|  | out_fail_nl80211: | 
|  | unregister_netdevice_notifier(&cfg80211_netdev_notifier); | 
|  | out_fail_notifier: | 
|  | wiphy_sysfs_exit(); | 
|  | out_fail_sysfs: | 
|  | unregister_pernet_device(&cfg80211_pernet_ops); | 
|  | out_fail_pernet: | 
|  | return err; | 
|  | } | 
|  | subsys_initcall(cfg80211_init); | 
|  |  | 
|  | static void cfg80211_exit(void) | 
|  | { | 
|  | debugfs_remove(ieee80211_debugfs_dir); | 
|  | nl80211_exit(); | 
|  | unregister_netdevice_notifier(&cfg80211_netdev_notifier); | 
|  | wiphy_sysfs_exit(); | 
|  | regulatory_exit(); | 
|  | unregister_pernet_device(&cfg80211_pernet_ops); | 
|  | destroy_workqueue(cfg80211_wq); | 
|  | } | 
|  | module_exit(cfg80211_exit); |