| /* | |
| * cfg80211 scan result handling | |
| * | |
| * Copyright 2008 Johannes Berg <johannes@sipsolutions.net> | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/slab.h> | |
| #include <linux/module.h> | |
| #include <linux/netdevice.h> | |
| #include <linux/wireless.h> | |
| #include <linux/nl80211.h> | |
| #include <linux/etherdevice.h> | |
| #include <net/arp.h> | |
| #include <net/cfg80211.h> | |
| #include <net/cfg80211-wext.h> | |
| #include <net/iw_handler.h> | |
| #include "core.h" | |
| #include "nl80211.h" | |
| #include "wext-compat.h" | |
| #include "rdev-ops.h" | |
| /** | |
| * DOC: BSS tree/list structure | |
| * | |
| * At the top level, the BSS list is kept in both a list in each | |
| * registered device (@bss_list) as well as an RB-tree for faster | |
| * lookup. In the RB-tree, entries can be looked up using their | |
| * channel, MESHID, MESHCONF (for MBSSes) or channel, BSSID, SSID | |
| * for other BSSes. | |
| * | |
| * Due to the possibility of hidden SSIDs, there's a second level | |
| * structure, the "hidden_list" and "hidden_beacon_bss" pointer. | |
| * The hidden_list connects all BSSes belonging to a single AP | |
| * that has a hidden SSID, and connects beacon and probe response | |
| * entries. For a probe response entry for a hidden SSID, the | |
| * hidden_beacon_bss pointer points to the BSS struct holding the | |
| * beacon's information. | |
| * | |
| * Reference counting is done for all these references except for | |
| * the hidden_list, so that a beacon BSS struct that is otherwise | |
| * not referenced has one reference for being on the bss_list and | |
| * one for each probe response entry that points to it using the | |
| * hidden_beacon_bss pointer. When a BSS struct that has such a | |
| * pointer is get/put, the refcount update is also propagated to | |
| * the referenced struct, this ensure that it cannot get removed | |
| * while somebody is using the probe response version. | |
| * | |
| * Note that the hidden_beacon_bss pointer never changes, due to | |
| * the reference counting. Therefore, no locking is needed for | |
| * it. | |
| * | |
| * Also note that the hidden_beacon_bss pointer is only relevant | |
| * if the driver uses something other than the IEs, e.g. private | |
| * data stored stored in the BSS struct, since the beacon IEs are | |
| * also linked into the probe response struct. | |
| */ | |
| #define IEEE80211_SCAN_RESULT_EXPIRE (30 * HZ) | |
| static void bss_free(struct cfg80211_internal_bss *bss) | |
| { | |
| struct cfg80211_bss_ies *ies; | |
| if (WARN_ON(atomic_read(&bss->hold))) | |
| return; | |
| ies = (void *)rcu_access_pointer(bss->pub.beacon_ies); | |
| if (ies && !bss->pub.hidden_beacon_bss) | |
| kfree_rcu(ies, rcu_head); | |
| ies = (void *)rcu_access_pointer(bss->pub.proberesp_ies); | |
| if (ies) | |
| kfree_rcu(ies, rcu_head); | |
| /* | |
| * This happens when the module is removed, it doesn't | |
| * really matter any more save for completeness | |
| */ | |
| if (!list_empty(&bss->hidden_list)) | |
| list_del(&bss->hidden_list); | |
| kfree(bss); | |
| } | |
| static inline void bss_ref_get(struct cfg80211_registered_device *dev, | |
| struct cfg80211_internal_bss *bss) | |
| { | |
| lockdep_assert_held(&dev->bss_lock); | |
| bss->refcount++; | |
| if (bss->pub.hidden_beacon_bss) { | |
| bss = container_of(bss->pub.hidden_beacon_bss, | |
| struct cfg80211_internal_bss, | |
| pub); | |
| bss->refcount++; | |
| } | |
| } | |
| static inline void bss_ref_put(struct cfg80211_registered_device *dev, | |
| struct cfg80211_internal_bss *bss) | |
| { | |
| lockdep_assert_held(&dev->bss_lock); | |
| if (bss->pub.hidden_beacon_bss) { | |
| struct cfg80211_internal_bss *hbss; | |
| hbss = container_of(bss->pub.hidden_beacon_bss, | |
| struct cfg80211_internal_bss, | |
| pub); | |
| hbss->refcount--; | |
| if (hbss->refcount == 0) | |
| bss_free(hbss); | |
| } | |
| bss->refcount--; | |
| if (bss->refcount == 0) | |
| bss_free(bss); | |
| } | |
| static bool __cfg80211_unlink_bss(struct cfg80211_registered_device *dev, | |
| struct cfg80211_internal_bss *bss) | |
| { | |
| lockdep_assert_held(&dev->bss_lock); | |
| if (!list_empty(&bss->hidden_list)) { | |
| /* | |
| * don't remove the beacon entry if it has | |
| * probe responses associated with it | |
| */ | |
| if (!bss->pub.hidden_beacon_bss) | |
| return false; | |
| /* | |
| * if it's a probe response entry break its | |
| * link to the other entries in the group | |
| */ | |
| list_del_init(&bss->hidden_list); | |
| } | |
| list_del_init(&bss->list); | |
| rb_erase(&bss->rbn, &dev->bss_tree); | |
| bss_ref_put(dev, bss); | |
| return true; | |
| } | |
| static void __cfg80211_bss_expire(struct cfg80211_registered_device *dev, | |
| unsigned long expire_time) | |
| { | |
| struct cfg80211_internal_bss *bss, *tmp; | |
| bool expired = false; | |
| lockdep_assert_held(&dev->bss_lock); | |
| list_for_each_entry_safe(bss, tmp, &dev->bss_list, list) { | |
| if (atomic_read(&bss->hold)) | |
| continue; | |
| if (!time_after(expire_time, bss->ts)) | |
| continue; | |
| if (__cfg80211_unlink_bss(dev, bss)) | |
| expired = true; | |
| } | |
| if (expired) | |
| dev->bss_generation++; | |
| } | |
| void ___cfg80211_scan_done(struct cfg80211_registered_device *rdev, bool leak) | |
| { | |
| struct cfg80211_scan_request *request; | |
| struct wireless_dev *wdev; | |
| #ifdef CONFIG_CFG80211_WEXT | |
| union iwreq_data wrqu; | |
| #endif | |
| ASSERT_RTNL(); | |
| request = rdev->scan_req; | |
| if (!request) | |
| return; | |
| wdev = request->wdev; | |
| /* | |
| * This must be before sending the other events! | |
| * Otherwise, wpa_supplicant gets completely confused with | |
| * wext events. | |
| */ | |
| if (wdev->netdev) | |
| cfg80211_sme_scan_done(wdev->netdev); | |
| if (request->aborted) { | |
| nl80211_send_scan_aborted(rdev, wdev); | |
| } else { | |
| if (request->flags & NL80211_SCAN_FLAG_FLUSH) { | |
| /* flush entries from previous scans */ | |
| spin_lock_bh(&rdev->bss_lock); | |
| __cfg80211_bss_expire(rdev, request->scan_start); | |
| spin_unlock_bh(&rdev->bss_lock); | |
| } | |
| nl80211_send_scan_done(rdev, wdev); | |
| } | |
| #ifdef CONFIG_CFG80211_WEXT | |
| if (wdev->netdev && !request->aborted) { | |
| memset(&wrqu, 0, sizeof(wrqu)); | |
| wireless_send_event(wdev->netdev, SIOCGIWSCAN, &wrqu, NULL); | |
| } | |
| #endif | |
| if (wdev->netdev) | |
| dev_put(wdev->netdev); | |
| rdev->scan_req = NULL; | |
| /* | |
| * OK. If this is invoked with "leak" then we can't | |
| * free this ... but we've cleaned it up anyway. The | |
| * driver failed to call the scan_done callback, so | |
| * all bets are off, it might still be trying to use | |
| * the scan request or not ... if it accesses the dev | |
| * in there (it shouldn't anyway) then it may crash. | |
| */ | |
| if (!leak) | |
| kfree(request); | |
| } | |
| void __cfg80211_scan_done(struct work_struct *wk) | |
| { | |
| struct cfg80211_registered_device *rdev; | |
| rdev = container_of(wk, struct cfg80211_registered_device, | |
| scan_done_wk); | |
| rtnl_lock(); | |
| ___cfg80211_scan_done(rdev, false); | |
| rtnl_unlock(); | |
| } | |
| void cfg80211_scan_done(struct cfg80211_scan_request *request, bool aborted) | |
| { | |
| trace_cfg80211_scan_done(request, aborted); | |
| WARN_ON(request != wiphy_to_dev(request->wiphy)->scan_req); | |
| request->aborted = aborted; | |
| request->notified = true; | |
| queue_work(cfg80211_wq, &wiphy_to_dev(request->wiphy)->scan_done_wk); | |
| } | |
| EXPORT_SYMBOL(cfg80211_scan_done); | |
| void __cfg80211_sched_scan_results(struct work_struct *wk) | |
| { | |
| struct cfg80211_registered_device *rdev; | |
| struct cfg80211_sched_scan_request *request; | |
| rdev = container_of(wk, struct cfg80211_registered_device, | |
| sched_scan_results_wk); | |
| rtnl_lock(); | |
| request = rdev->sched_scan_req; | |
| /* we don't have sched_scan_req anymore if the scan is stopping */ | |
| if (request) { | |
| if (request->flags & NL80211_SCAN_FLAG_FLUSH) { | |
| /* flush entries from previous scans */ | |
| spin_lock_bh(&rdev->bss_lock); | |
| __cfg80211_bss_expire(rdev, request->scan_start); | |
| spin_unlock_bh(&rdev->bss_lock); | |
| request->scan_start = | |
| jiffies + msecs_to_jiffies(request->interval); | |
| } | |
| nl80211_send_sched_scan_results(rdev, request->dev); | |
| } | |
| rtnl_unlock(); | |
| } | |
| void cfg80211_sched_scan_results(struct wiphy *wiphy) | |
| { | |
| trace_cfg80211_sched_scan_results(wiphy); | |
| /* ignore if we're not scanning */ | |
| if (wiphy_to_dev(wiphy)->sched_scan_req) | |
| queue_work(cfg80211_wq, | |
| &wiphy_to_dev(wiphy)->sched_scan_results_wk); | |
| } | |
| EXPORT_SYMBOL(cfg80211_sched_scan_results); | |
| void cfg80211_sched_scan_stopped(struct wiphy *wiphy) | |
| { | |
| struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy); | |
| trace_cfg80211_sched_scan_stopped(wiphy); | |
| rtnl_lock(); | |
| __cfg80211_stop_sched_scan(rdev, true); | |
| rtnl_unlock(); | |
| } | |
| EXPORT_SYMBOL(cfg80211_sched_scan_stopped); | |
| int __cfg80211_stop_sched_scan(struct cfg80211_registered_device *rdev, | |
| bool driver_initiated) | |
| { | |
| struct net_device *dev; | |
| ASSERT_RTNL(); | |
| if (!rdev->sched_scan_req) | |
| return -ENOENT; | |
| dev = rdev->sched_scan_req->dev; | |
| if (!driver_initiated) { | |
| int err = rdev_sched_scan_stop(rdev, dev); | |
| if (err) | |
| return err; | |
| } | |
| nl80211_send_sched_scan(rdev, dev, NL80211_CMD_SCHED_SCAN_STOPPED); | |
| kfree(rdev->sched_scan_req); | |
| rdev->sched_scan_req = NULL; | |
| return 0; | |
| } | |
| void cfg80211_bss_age(struct cfg80211_registered_device *dev, | |
| unsigned long age_secs) | |
| { | |
| struct cfg80211_internal_bss *bss; | |
| unsigned long age_jiffies = msecs_to_jiffies(age_secs * MSEC_PER_SEC); | |
| spin_lock_bh(&dev->bss_lock); | |
| list_for_each_entry(bss, &dev->bss_list, list) | |
| bss->ts -= age_jiffies; | |
| spin_unlock_bh(&dev->bss_lock); | |
| } | |
| void cfg80211_bss_expire(struct cfg80211_registered_device *dev) | |
| { | |
| __cfg80211_bss_expire(dev, jiffies - IEEE80211_SCAN_RESULT_EXPIRE); | |
| } | |
| const u8 *cfg80211_find_ie(u8 eid, const u8 *ies, int len) | |
| { | |
| while (len > 2 && ies[0] != eid) { | |
| len -= ies[1] + 2; | |
| ies += ies[1] + 2; | |
| } | |
| if (len < 2) | |
| return NULL; | |
| if (len < 2 + ies[1]) | |
| return NULL; | |
| return ies; | |
| } | |
| EXPORT_SYMBOL(cfg80211_find_ie); | |
| const u8 *cfg80211_find_vendor_ie(unsigned int oui, u8 oui_type, | |
| const u8 *ies, int len) | |
| { | |
| struct ieee80211_vendor_ie *ie; | |
| const u8 *pos = ies, *end = ies + len; | |
| int ie_oui; | |
| while (pos < end) { | |
| pos = cfg80211_find_ie(WLAN_EID_VENDOR_SPECIFIC, pos, | |
| end - pos); | |
| if (!pos) | |
| return NULL; | |
| ie = (struct ieee80211_vendor_ie *)pos; | |
| /* make sure we can access ie->len */ | |
| BUILD_BUG_ON(offsetof(struct ieee80211_vendor_ie, len) != 1); | |
| if (ie->len < sizeof(*ie)) | |
| goto cont; | |
| ie_oui = ie->oui[0] << 16 | ie->oui[1] << 8 | ie->oui[2]; | |
| if (ie_oui == oui && ie->oui_type == oui_type) | |
| return pos; | |
| cont: | |
| pos += 2 + ie->len; | |
| } | |
| return NULL; | |
| } | |
| EXPORT_SYMBOL(cfg80211_find_vendor_ie); | |
| static bool is_bss(struct cfg80211_bss *a, const u8 *bssid, | |
| const u8 *ssid, size_t ssid_len) | |
| { | |
| const struct cfg80211_bss_ies *ies; | |
| const u8 *ssidie; | |
| if (bssid && !ether_addr_equal(a->bssid, bssid)) | |
| return false; | |
| if (!ssid) | |
| return true; | |
| ies = rcu_access_pointer(a->ies); | |
| if (!ies) | |
| return false; | |
| ssidie = cfg80211_find_ie(WLAN_EID_SSID, ies->data, ies->len); | |
| if (!ssidie) | |
| return false; | |
| if (ssidie[1] != ssid_len) | |
| return false; | |
| return memcmp(ssidie + 2, ssid, ssid_len) == 0; | |
| } | |
| /** | |
| * enum bss_compare_mode - BSS compare mode | |
| * @BSS_CMP_REGULAR: regular compare mode (for insertion and normal find) | |
| * @BSS_CMP_HIDE_ZLEN: find hidden SSID with zero-length mode | |
| * @BSS_CMP_HIDE_NUL: find hidden SSID with NUL-ed out mode | |
| */ | |
| enum bss_compare_mode { | |
| BSS_CMP_REGULAR, | |
| BSS_CMP_HIDE_ZLEN, | |
| BSS_CMP_HIDE_NUL, | |
| }; | |
| static int cmp_bss(struct cfg80211_bss *a, | |
| struct cfg80211_bss *b, | |
| enum bss_compare_mode mode) | |
| { | |
| const struct cfg80211_bss_ies *a_ies, *b_ies; | |
| const u8 *ie1 = NULL; | |
| const u8 *ie2 = NULL; | |
| int i, r; | |
| if (a->channel != b->channel) | |
| return b->channel->center_freq - a->channel->center_freq; | |
| a_ies = rcu_access_pointer(a->ies); | |
| if (!a_ies) | |
| return -1; | |
| b_ies = rcu_access_pointer(b->ies); | |
| if (!b_ies) | |
| return 1; | |
| if (WLAN_CAPABILITY_IS_STA_BSS(a->capability)) | |
| ie1 = cfg80211_find_ie(WLAN_EID_MESH_ID, | |
| a_ies->data, a_ies->len); | |
| if (WLAN_CAPABILITY_IS_STA_BSS(b->capability)) | |
| ie2 = cfg80211_find_ie(WLAN_EID_MESH_ID, | |
| b_ies->data, b_ies->len); | |
| if (ie1 && ie2) { | |
| int mesh_id_cmp; | |
| if (ie1[1] == ie2[1]) | |
| mesh_id_cmp = memcmp(ie1 + 2, ie2 + 2, ie1[1]); | |
| else | |
| mesh_id_cmp = ie2[1] - ie1[1]; | |
| ie1 = cfg80211_find_ie(WLAN_EID_MESH_CONFIG, | |
| a_ies->data, a_ies->len); | |
| ie2 = cfg80211_find_ie(WLAN_EID_MESH_CONFIG, | |
| b_ies->data, b_ies->len); | |
| if (ie1 && ie2) { | |
| if (mesh_id_cmp) | |
| return mesh_id_cmp; | |
| if (ie1[1] != ie2[1]) | |
| return ie2[1] - ie1[1]; | |
| return memcmp(ie1 + 2, ie2 + 2, ie1[1]); | |
| } | |
| } | |
| r = memcmp(a->bssid, b->bssid, sizeof(a->bssid)); | |
| if (r) | |
| return r; | |
| ie1 = cfg80211_find_ie(WLAN_EID_SSID, a_ies->data, a_ies->len); | |
| ie2 = cfg80211_find_ie(WLAN_EID_SSID, b_ies->data, b_ies->len); | |
| if (!ie1 && !ie2) | |
| return 0; | |
| /* | |
| * Note that with "hide_ssid", the function returns a match if | |
| * the already-present BSS ("b") is a hidden SSID beacon for | |
| * the new BSS ("a"). | |
| */ | |
| /* sort missing IE before (left of) present IE */ | |
| if (!ie1) | |
| return -1; | |
| if (!ie2) | |
| return 1; | |
| switch (mode) { | |
| case BSS_CMP_HIDE_ZLEN: | |
| /* | |
| * In ZLEN mode we assume the BSS entry we're | |
| * looking for has a zero-length SSID. So if | |
| * the one we're looking at right now has that, | |
| * return 0. Otherwise, return the difference | |
| * in length, but since we're looking for the | |
| * 0-length it's really equivalent to returning | |
| * the length of the one we're looking at. | |
| * | |
| * No content comparison is needed as we assume | |
| * the content length is zero. | |
| */ | |
| return ie2[1]; | |
| case BSS_CMP_REGULAR: | |
| default: | |
| /* sort by length first, then by contents */ | |
| if (ie1[1] != ie2[1]) | |
| return ie2[1] - ie1[1]; | |
| return memcmp(ie1 + 2, ie2 + 2, ie1[1]); | |
| case BSS_CMP_HIDE_NUL: | |
| if (ie1[1] != ie2[1]) | |
| return ie2[1] - ie1[1]; | |
| /* this is equivalent to memcmp(zeroes, ie2 + 2, len) */ | |
| for (i = 0; i < ie2[1]; i++) | |
| if (ie2[i + 2]) | |
| return -1; | |
| return 0; | |
| } | |
| } | |
| /* Returned bss is reference counted and must be cleaned up appropriately. */ | |
| struct cfg80211_bss *cfg80211_get_bss(struct wiphy *wiphy, | |
| struct ieee80211_channel *channel, | |
| const u8 *bssid, | |
| const u8 *ssid, size_t ssid_len, | |
| u16 capa_mask, u16 capa_val) | |
| { | |
| struct cfg80211_registered_device *dev = wiphy_to_dev(wiphy); | |
| struct cfg80211_internal_bss *bss, *res = NULL; | |
| unsigned long now = jiffies; | |
| trace_cfg80211_get_bss(wiphy, channel, bssid, ssid, ssid_len, capa_mask, | |
| capa_val); | |
| spin_lock_bh(&dev->bss_lock); | |
| list_for_each_entry(bss, &dev->bss_list, list) { | |
| if ((bss->pub.capability & capa_mask) != capa_val) | |
| continue; | |
| if (channel && bss->pub.channel != channel) | |
| continue; | |
| /* Don't get expired BSS structs */ | |
| if (time_after(now, bss->ts + IEEE80211_SCAN_RESULT_EXPIRE) && | |
| !atomic_read(&bss->hold)) | |
| continue; | |
| if (is_bss(&bss->pub, bssid, ssid, ssid_len)) { | |
| res = bss; | |
| bss_ref_get(dev, res); | |
| break; | |
| } | |
| } | |
| spin_unlock_bh(&dev->bss_lock); | |
| if (!res) | |
| return NULL; | |
| trace_cfg80211_return_bss(&res->pub); | |
| return &res->pub; | |
| } | |
| EXPORT_SYMBOL(cfg80211_get_bss); | |
| static void rb_insert_bss(struct cfg80211_registered_device *dev, | |
| struct cfg80211_internal_bss *bss) | |
| { | |
| struct rb_node **p = &dev->bss_tree.rb_node; | |
| struct rb_node *parent = NULL; | |
| struct cfg80211_internal_bss *tbss; | |
| int cmp; | |
| while (*p) { | |
| parent = *p; | |
| tbss = rb_entry(parent, struct cfg80211_internal_bss, rbn); | |
| cmp = cmp_bss(&bss->pub, &tbss->pub, BSS_CMP_REGULAR); | |
| if (WARN_ON(!cmp)) { | |
| /* will sort of leak this BSS */ | |
| return; | |
| } | |
| if (cmp < 0) | |
| p = &(*p)->rb_left; | |
| else | |
| p = &(*p)->rb_right; | |
| } | |
| rb_link_node(&bss->rbn, parent, p); | |
| rb_insert_color(&bss->rbn, &dev->bss_tree); | |
| } | |
| static struct cfg80211_internal_bss * | |
| rb_find_bss(struct cfg80211_registered_device *dev, | |
| struct cfg80211_internal_bss *res, | |
| enum bss_compare_mode mode) | |
| { | |
| struct rb_node *n = dev->bss_tree.rb_node; | |
| struct cfg80211_internal_bss *bss; | |
| int r; | |
| while (n) { | |
| bss = rb_entry(n, struct cfg80211_internal_bss, rbn); | |
| r = cmp_bss(&res->pub, &bss->pub, mode); | |
| if (r == 0) | |
| return bss; | |
| else if (r < 0) | |
| n = n->rb_left; | |
| else | |
| n = n->rb_right; | |
| } | |
| return NULL; | |
| } | |
| static bool cfg80211_combine_bsses(struct cfg80211_registered_device *dev, | |
| struct cfg80211_internal_bss *new) | |
| { | |
| const struct cfg80211_bss_ies *ies; | |
| struct cfg80211_internal_bss *bss; | |
| const u8 *ie; | |
| int i, ssidlen; | |
| u8 fold = 0; | |
| ies = rcu_access_pointer(new->pub.beacon_ies); | |
| if (WARN_ON(!ies)) | |
| return false; | |
| ie = cfg80211_find_ie(WLAN_EID_SSID, ies->data, ies->len); | |
| if (!ie) { | |
| /* nothing to do */ | |
| return true; | |
| } | |
| ssidlen = ie[1]; | |
| for (i = 0; i < ssidlen; i++) | |
| fold |= ie[2 + i]; | |
| if (fold) { | |
| /* not a hidden SSID */ | |
| return true; | |
| } | |
| /* This is the bad part ... */ | |
| list_for_each_entry(bss, &dev->bss_list, list) { | |
| if (!ether_addr_equal(bss->pub.bssid, new->pub.bssid)) | |
| continue; | |
| if (bss->pub.channel != new->pub.channel) | |
| continue; | |
| if (bss->pub.scan_width != new->pub.scan_width) | |
| continue; | |
| if (rcu_access_pointer(bss->pub.beacon_ies)) | |
| continue; | |
| ies = rcu_access_pointer(bss->pub.ies); | |
| if (!ies) | |
| continue; | |
| ie = cfg80211_find_ie(WLAN_EID_SSID, ies->data, ies->len); | |
| if (!ie) | |
| continue; | |
| if (ssidlen && ie[1] != ssidlen) | |
| continue; | |
| /* that would be odd ... */ | |
| if (bss->pub.beacon_ies) | |
| continue; | |
| if (WARN_ON_ONCE(bss->pub.hidden_beacon_bss)) | |
| continue; | |
| if (WARN_ON_ONCE(!list_empty(&bss->hidden_list))) | |
| list_del(&bss->hidden_list); | |
| /* combine them */ | |
| list_add(&bss->hidden_list, &new->hidden_list); | |
| bss->pub.hidden_beacon_bss = &new->pub; | |
| new->refcount += bss->refcount; | |
| rcu_assign_pointer(bss->pub.beacon_ies, | |
| new->pub.beacon_ies); | |
| } | |
| return true; | |
| } | |
| /* Returned bss is reference counted and must be cleaned up appropriately. */ | |
| static struct cfg80211_internal_bss * | |
| cfg80211_bss_update(struct cfg80211_registered_device *dev, | |
| struct cfg80211_internal_bss *tmp) | |
| { | |
| struct cfg80211_internal_bss *found = NULL; | |
| if (WARN_ON(!tmp->pub.channel)) | |
| return NULL; | |
| tmp->ts = jiffies; | |
| spin_lock_bh(&dev->bss_lock); | |
| if (WARN_ON(!rcu_access_pointer(tmp->pub.ies))) { | |
| spin_unlock_bh(&dev->bss_lock); | |
| return NULL; | |
| } | |
| found = rb_find_bss(dev, tmp, BSS_CMP_REGULAR); | |
| if (found) { | |
| /* Update IEs */ | |
| if (rcu_access_pointer(tmp->pub.proberesp_ies)) { | |
| const struct cfg80211_bss_ies *old; | |
| old = rcu_access_pointer(found->pub.proberesp_ies); | |
| rcu_assign_pointer(found->pub.proberesp_ies, | |
| tmp->pub.proberesp_ies); | |
| /* Override possible earlier Beacon frame IEs */ | |
| rcu_assign_pointer(found->pub.ies, | |
| tmp->pub.proberesp_ies); | |
| if (old) | |
| kfree_rcu((struct cfg80211_bss_ies *)old, | |
| rcu_head); | |
| } else if (rcu_access_pointer(tmp->pub.beacon_ies)) { | |
| const struct cfg80211_bss_ies *old; | |
| struct cfg80211_internal_bss *bss; | |
| if (found->pub.hidden_beacon_bss && | |
| !list_empty(&found->hidden_list)) { | |
| const struct cfg80211_bss_ies *f; | |
| /* | |
| * The found BSS struct is one of the probe | |
| * response members of a group, but we're | |
| * receiving a beacon (beacon_ies in the tmp | |
| * bss is used). This can only mean that the | |
| * AP changed its beacon from not having an | |
| * SSID to showing it, which is confusing so | |
| * drop this information. | |
| */ | |
| f = rcu_access_pointer(tmp->pub.beacon_ies); | |
| kfree_rcu((struct cfg80211_bss_ies *)f, | |
| rcu_head); | |
| goto drop; | |
| } | |
| old = rcu_access_pointer(found->pub.beacon_ies); | |
| rcu_assign_pointer(found->pub.beacon_ies, | |
| tmp->pub.beacon_ies); | |
| /* Override IEs if they were from a beacon before */ | |
| if (old == rcu_access_pointer(found->pub.ies)) | |
| rcu_assign_pointer(found->pub.ies, | |
| tmp->pub.beacon_ies); | |
| /* Assign beacon IEs to all sub entries */ | |
| list_for_each_entry(bss, &found->hidden_list, | |
| hidden_list) { | |
| const struct cfg80211_bss_ies *ies; | |
| ies = rcu_access_pointer(bss->pub.beacon_ies); | |
| WARN_ON(ies != old); | |
| rcu_assign_pointer(bss->pub.beacon_ies, | |
| tmp->pub.beacon_ies); | |
| } | |
| if (old) | |
| kfree_rcu((struct cfg80211_bss_ies *)old, | |
| rcu_head); | |
| } | |
| found->pub.beacon_interval = tmp->pub.beacon_interval; | |
| found->pub.signal = tmp->pub.signal; | |
| found->pub.capability = tmp->pub.capability; | |
| found->ts = tmp->ts; | |
| } else { | |
| struct cfg80211_internal_bss *new; | |
| struct cfg80211_internal_bss *hidden; | |
| struct cfg80211_bss_ies *ies; | |
| /* | |
| * create a copy -- the "res" variable that is passed in | |
| * is allocated on the stack since it's not needed in the | |
| * more common case of an update | |
| */ | |
| new = kzalloc(sizeof(*new) + dev->wiphy.bss_priv_size, | |
| GFP_ATOMIC); | |
| if (!new) { | |
| ies = (void *)rcu_dereference(tmp->pub.beacon_ies); | |
| if (ies) | |
| kfree_rcu(ies, rcu_head); | |
| ies = (void *)rcu_dereference(tmp->pub.proberesp_ies); | |
| if (ies) | |
| kfree_rcu(ies, rcu_head); | |
| goto drop; | |
| } | |
| memcpy(new, tmp, sizeof(*new)); | |
| new->refcount = 1; | |
| INIT_LIST_HEAD(&new->hidden_list); | |
| if (rcu_access_pointer(tmp->pub.proberesp_ies)) { | |
| hidden = rb_find_bss(dev, tmp, BSS_CMP_HIDE_ZLEN); | |
| if (!hidden) | |
| hidden = rb_find_bss(dev, tmp, | |
| BSS_CMP_HIDE_NUL); | |
| if (hidden) { | |
| new->pub.hidden_beacon_bss = &hidden->pub; | |
| list_add(&new->hidden_list, | |
| &hidden->hidden_list); | |
| hidden->refcount++; | |
| rcu_assign_pointer(new->pub.beacon_ies, | |
| hidden->pub.beacon_ies); | |
| } | |
| } else { | |
| /* | |
| * Ok so we found a beacon, and don't have an entry. If | |
| * it's a beacon with hidden SSID, we might be in for an | |
| * expensive search for any probe responses that should | |
| * be grouped with this beacon for updates ... | |
| */ | |
| if (!cfg80211_combine_bsses(dev, new)) { | |
| kfree(new); | |
| goto drop; | |
| } | |
| } | |
| list_add_tail(&new->list, &dev->bss_list); | |
| rb_insert_bss(dev, new); | |
| found = new; | |
| } | |
| dev->bss_generation++; | |
| bss_ref_get(dev, found); | |
| spin_unlock_bh(&dev->bss_lock); | |
| return found; | |
| drop: | |
| spin_unlock_bh(&dev->bss_lock); | |
| return NULL; | |
| } | |
| static struct ieee80211_channel * | |
| cfg80211_get_bss_channel(struct wiphy *wiphy, const u8 *ie, size_t ielen, | |
| struct ieee80211_channel *channel) | |
| { | |
| const u8 *tmp; | |
| u32 freq; | |
| int channel_number = -1; | |
| tmp = cfg80211_find_ie(WLAN_EID_DS_PARAMS, ie, ielen); | |
| if (tmp && tmp[1] == 1) { | |
| channel_number = tmp[2]; | |
| } else { | |
| tmp = cfg80211_find_ie(WLAN_EID_HT_OPERATION, ie, ielen); | |
| if (tmp && tmp[1] >= sizeof(struct ieee80211_ht_operation)) { | |
| struct ieee80211_ht_operation *htop = (void *)(tmp + 2); | |
| channel_number = htop->primary_chan; | |
| } | |
| } | |
| if (channel_number < 0) | |
| return channel; | |
| freq = ieee80211_channel_to_frequency(channel_number, channel->band); | |
| channel = ieee80211_get_channel(wiphy, freq); | |
| if (!channel) | |
| return NULL; | |
| if (channel->flags & IEEE80211_CHAN_DISABLED) | |
| return NULL; | |
| return channel; | |
| } | |
| /* Returned bss is reference counted and must be cleaned up appropriately. */ | |
| struct cfg80211_bss* | |
| cfg80211_inform_bss_width(struct wiphy *wiphy, | |
| struct ieee80211_channel *channel, | |
| enum nl80211_bss_scan_width scan_width, | |
| const u8 *bssid, u64 tsf, u16 capability, | |
| u16 beacon_interval, const u8 *ie, size_t ielen, | |
| s32 signal, gfp_t gfp) | |
| { | |
| struct cfg80211_bss_ies *ies; | |
| struct cfg80211_internal_bss tmp = {}, *res; | |
| if (WARN_ON(!wiphy)) | |
| return NULL; | |
| if (WARN_ON(wiphy->signal_type == CFG80211_SIGNAL_TYPE_UNSPEC && | |
| (signal < 0 || signal > 100))) | |
| return NULL; | |
| channel = cfg80211_get_bss_channel(wiphy, ie, ielen, channel); | |
| if (!channel) | |
| return NULL; | |
| memcpy(tmp.pub.bssid, bssid, ETH_ALEN); | |
| tmp.pub.channel = channel; | |
| tmp.pub.scan_width = scan_width; | |
| tmp.pub.signal = signal; | |
| tmp.pub.beacon_interval = beacon_interval; | |
| tmp.pub.capability = capability; | |
| /* | |
| * Since we do not know here whether the IEs are from a Beacon or Probe | |
| * Response frame, we need to pick one of the options and only use it | |
| * with the driver that does not provide the full Beacon/Probe Response | |
| * frame. Use Beacon frame pointer to avoid indicating that this should | |
| * override the IEs pointer should we have received an earlier | |
| * indication of Probe Response data. | |
| */ | |
| ies = kmalloc(sizeof(*ies) + ielen, gfp); | |
| if (!ies) | |
| return NULL; | |
| ies->len = ielen; | |
| ies->tsf = tsf; | |
| memcpy(ies->data, ie, ielen); | |
| rcu_assign_pointer(tmp.pub.beacon_ies, ies); | |
| rcu_assign_pointer(tmp.pub.ies, ies); | |
| res = cfg80211_bss_update(wiphy_to_dev(wiphy), &tmp); | |
| if (!res) | |
| return NULL; | |
| if (res->pub.capability & WLAN_CAPABILITY_ESS) | |
| regulatory_hint_found_beacon(wiphy, channel, gfp); | |
| trace_cfg80211_return_bss(&res->pub); | |
| /* cfg80211_bss_update gives us a referenced result */ | |
| return &res->pub; | |
| } | |
| EXPORT_SYMBOL(cfg80211_inform_bss_width); | |
| /* Returned bss is reference counted and must be cleaned up appropriately. */ | |
| struct cfg80211_bss * | |
| cfg80211_inform_bss_width_frame(struct wiphy *wiphy, | |
| struct ieee80211_channel *channel, | |
| enum nl80211_bss_scan_width scan_width, | |
| struct ieee80211_mgmt *mgmt, size_t len, | |
| s32 signal, gfp_t gfp) | |
| { | |
| struct cfg80211_internal_bss tmp = {}, *res; | |
| struct cfg80211_bss_ies *ies; | |
| size_t ielen = len - offsetof(struct ieee80211_mgmt, | |
| u.probe_resp.variable); | |
| BUILD_BUG_ON(offsetof(struct ieee80211_mgmt, u.probe_resp.variable) != | |
| offsetof(struct ieee80211_mgmt, u.beacon.variable)); | |
| trace_cfg80211_inform_bss_width_frame(wiphy, channel, scan_width, mgmt, | |
| len, signal); | |
| if (WARN_ON(!mgmt)) | |
| return NULL; | |
| if (WARN_ON(!wiphy)) | |
| return NULL; | |
| if (WARN_ON(wiphy->signal_type == CFG80211_SIGNAL_TYPE_UNSPEC && | |
| (signal < 0 || signal > 100))) | |
| return NULL; | |
| if (WARN_ON(len < offsetof(struct ieee80211_mgmt, u.probe_resp.variable))) | |
| return NULL; | |
| channel = cfg80211_get_bss_channel(wiphy, mgmt->u.beacon.variable, | |
| ielen, channel); | |
| if (!channel) | |
| return NULL; | |
| ies = kmalloc(sizeof(*ies) + ielen, gfp); | |
| if (!ies) | |
| return NULL; | |
| ies->len = ielen; | |
| ies->tsf = le64_to_cpu(mgmt->u.probe_resp.timestamp); | |
| memcpy(ies->data, mgmt->u.probe_resp.variable, ielen); | |
| if (ieee80211_is_probe_resp(mgmt->frame_control)) | |
| rcu_assign_pointer(tmp.pub.proberesp_ies, ies); | |
| else | |
| rcu_assign_pointer(tmp.pub.beacon_ies, ies); | |
| rcu_assign_pointer(tmp.pub.ies, ies); | |
| memcpy(tmp.pub.bssid, mgmt->bssid, ETH_ALEN); | |
| tmp.pub.channel = channel; | |
| tmp.pub.scan_width = scan_width; | |
| tmp.pub.signal = signal; | |
| tmp.pub.beacon_interval = le16_to_cpu(mgmt->u.probe_resp.beacon_int); | |
| tmp.pub.capability = le16_to_cpu(mgmt->u.probe_resp.capab_info); | |
| res = cfg80211_bss_update(wiphy_to_dev(wiphy), &tmp); | |
| if (!res) | |
| return NULL; | |
| if (res->pub.capability & WLAN_CAPABILITY_ESS) | |
| regulatory_hint_found_beacon(wiphy, channel, gfp); | |
| trace_cfg80211_return_bss(&res->pub); | |
| /* cfg80211_bss_update gives us a referenced result */ | |
| return &res->pub; | |
| } | |
| EXPORT_SYMBOL(cfg80211_inform_bss_width_frame); | |
| void cfg80211_ref_bss(struct wiphy *wiphy, struct cfg80211_bss *pub) | |
| { | |
| struct cfg80211_registered_device *dev = wiphy_to_dev(wiphy); | |
| struct cfg80211_internal_bss *bss; | |
| if (!pub) | |
| return; | |
| bss = container_of(pub, struct cfg80211_internal_bss, pub); | |
| spin_lock_bh(&dev->bss_lock); | |
| bss_ref_get(dev, bss); | |
| spin_unlock_bh(&dev->bss_lock); | |
| } | |
| EXPORT_SYMBOL(cfg80211_ref_bss); | |
| void cfg80211_put_bss(struct wiphy *wiphy, struct cfg80211_bss *pub) | |
| { | |
| struct cfg80211_registered_device *dev = wiphy_to_dev(wiphy); | |
| struct cfg80211_internal_bss *bss; | |
| if (!pub) | |
| return; | |
| bss = container_of(pub, struct cfg80211_internal_bss, pub); | |
| spin_lock_bh(&dev->bss_lock); | |
| bss_ref_put(dev, bss); | |
| spin_unlock_bh(&dev->bss_lock); | |
| } | |
| EXPORT_SYMBOL(cfg80211_put_bss); | |
| void cfg80211_unlink_bss(struct wiphy *wiphy, struct cfg80211_bss *pub) | |
| { | |
| struct cfg80211_registered_device *dev = wiphy_to_dev(wiphy); | |
| struct cfg80211_internal_bss *bss; | |
| if (WARN_ON(!pub)) | |
| return; | |
| bss = container_of(pub, struct cfg80211_internal_bss, pub); | |
| spin_lock_bh(&dev->bss_lock); | |
| if (!list_empty(&bss->list)) { | |
| if (__cfg80211_unlink_bss(dev, bss)) | |
| dev->bss_generation++; | |
| } | |
| spin_unlock_bh(&dev->bss_lock); | |
| } | |
| EXPORT_SYMBOL(cfg80211_unlink_bss); | |
| #ifdef CONFIG_CFG80211_WEXT | |
| static struct cfg80211_registered_device * | |
| cfg80211_get_dev_from_ifindex(struct net *net, int ifindex) | |
| { | |
| struct cfg80211_registered_device *rdev; | |
| struct net_device *dev; | |
| ASSERT_RTNL(); | |
| dev = dev_get_by_index(net, ifindex); | |
| if (!dev) | |
| return ERR_PTR(-ENODEV); | |
| if (dev->ieee80211_ptr) | |
| rdev = wiphy_to_dev(dev->ieee80211_ptr->wiphy); | |
| else | |
| rdev = ERR_PTR(-ENODEV); | |
| dev_put(dev); | |
| return rdev; | |
| } | |
| int cfg80211_wext_siwscan(struct net_device *dev, | |
| struct iw_request_info *info, | |
| union iwreq_data *wrqu, char *extra) | |
| { | |
| struct cfg80211_registered_device *rdev; | |
| struct wiphy *wiphy; | |
| struct iw_scan_req *wreq = NULL; | |
| struct cfg80211_scan_request *creq = NULL; | |
| int i, err, n_channels = 0; | |
| enum ieee80211_band band; | |
| if (!netif_running(dev)) | |
| return -ENETDOWN; | |
| if (wrqu->data.length == sizeof(struct iw_scan_req)) | |
| wreq = (struct iw_scan_req *)extra; | |
| rdev = cfg80211_get_dev_from_ifindex(dev_net(dev), dev->ifindex); | |
| if (IS_ERR(rdev)) | |
| return PTR_ERR(rdev); | |
| if (rdev->scan_req) { | |
| err = -EBUSY; | |
| goto out; | |
| } | |
| wiphy = &rdev->wiphy; | |
| /* Determine number of channels, needed to allocate creq */ | |
| if (wreq && wreq->num_channels) | |
| n_channels = wreq->num_channels; | |
| else { | |
| for (band = 0; band < IEEE80211_NUM_BANDS; band++) | |
| if (wiphy->bands[band]) | |
| n_channels += wiphy->bands[band]->n_channels; | |
| } | |
| creq = kzalloc(sizeof(*creq) + sizeof(struct cfg80211_ssid) + | |
| n_channels * sizeof(void *), | |
| GFP_ATOMIC); | |
| if (!creq) { | |
| err = -ENOMEM; | |
| goto out; | |
| } | |
| creq->wiphy = wiphy; | |
| creq->wdev = dev->ieee80211_ptr; | |
| /* SSIDs come after channels */ | |
| creq->ssids = (void *)&creq->channels[n_channels]; | |
| creq->n_channels = n_channels; | |
| creq->n_ssids = 1; | |
| creq->scan_start = jiffies; | |
| /* translate "Scan on frequencies" request */ | |
| i = 0; | |
| for (band = 0; band < IEEE80211_NUM_BANDS; band++) { | |
| int j; | |
| if (!wiphy->bands[band]) | |
| continue; | |
| for (j = 0; j < wiphy->bands[band]->n_channels; j++) { | |
| /* ignore disabled channels */ | |
| if (wiphy->bands[band]->channels[j].flags & | |
| IEEE80211_CHAN_DISABLED) | |
| continue; | |
| /* If we have a wireless request structure and the | |
| * wireless request specifies frequencies, then search | |
| * for the matching hardware channel. | |
| */ | |
| if (wreq && wreq->num_channels) { | |
| int k; | |
| int wiphy_freq = wiphy->bands[band]->channels[j].center_freq; | |
| for (k = 0; k < wreq->num_channels; k++) { | |
| int wext_freq = cfg80211_wext_freq(wiphy, &wreq->channel_list[k]); | |
| if (wext_freq == wiphy_freq) | |
| goto wext_freq_found; | |
| } | |
| goto wext_freq_not_found; | |
| } | |
| wext_freq_found: | |
| creq->channels[i] = &wiphy->bands[band]->channels[j]; | |
| i++; | |
| wext_freq_not_found: ; | |
| } | |
| } | |
| /* No channels found? */ | |
| if (!i) { | |
| err = -EINVAL; | |
| goto out; | |
| } | |
| /* Set real number of channels specified in creq->channels[] */ | |
| creq->n_channels = i; | |
| /* translate "Scan for SSID" request */ | |
| if (wreq) { | |
| if (wrqu->data.flags & IW_SCAN_THIS_ESSID) { | |
| if (wreq->essid_len > IEEE80211_MAX_SSID_LEN) { | |
| err = -EINVAL; | |
| goto out; | |
| } | |
| memcpy(creq->ssids[0].ssid, wreq->essid, wreq->essid_len); | |
| creq->ssids[0].ssid_len = wreq->essid_len; | |
| } | |
| if (wreq->scan_type == IW_SCAN_TYPE_PASSIVE) | |
| creq->n_ssids = 0; | |
| } | |
| for (i = 0; i < IEEE80211_NUM_BANDS; i++) | |
| if (wiphy->bands[i]) | |
| creq->rates[i] = (1 << wiphy->bands[i]->n_bitrates) - 1; | |
| rdev->scan_req = creq; | |
| err = rdev_scan(rdev, creq); | |
| if (err) { | |
| rdev->scan_req = NULL; | |
| /* creq will be freed below */ | |
| } else { | |
| nl80211_send_scan_start(rdev, dev->ieee80211_ptr); | |
| /* creq now owned by driver */ | |
| creq = NULL; | |
| dev_hold(dev); | |
| } | |
| out: | |
| kfree(creq); | |
| return err; | |
| } | |
| EXPORT_SYMBOL_GPL(cfg80211_wext_siwscan); | |
| static void ieee80211_scan_add_ies(struct iw_request_info *info, | |
| const struct cfg80211_bss_ies *ies, | |
| char **current_ev, char *end_buf) | |
| { | |
| const u8 *pos, *end, *next; | |
| struct iw_event iwe; | |
| if (!ies) | |
| return; | |
| /* | |
| * If needed, fragment the IEs buffer (at IE boundaries) into short | |
| * enough fragments to fit into IW_GENERIC_IE_MAX octet messages. | |
| */ | |
| pos = ies->data; | |
| end = pos + ies->len; | |
| while (end - pos > IW_GENERIC_IE_MAX) { | |
| next = pos + 2 + pos[1]; | |
| while (next + 2 + next[1] - pos < IW_GENERIC_IE_MAX) | |
| next = next + 2 + next[1]; | |
| memset(&iwe, 0, sizeof(iwe)); | |
| iwe.cmd = IWEVGENIE; | |
| iwe.u.data.length = next - pos; | |
| *current_ev = iwe_stream_add_point(info, *current_ev, | |
| end_buf, &iwe, | |
| (void *)pos); | |
| pos = next; | |
| } | |
| if (end > pos) { | |
| memset(&iwe, 0, sizeof(iwe)); | |
| iwe.cmd = IWEVGENIE; | |
| iwe.u.data.length = end - pos; | |
| *current_ev = iwe_stream_add_point(info, *current_ev, | |
| end_buf, &iwe, | |
| (void *)pos); | |
| } | |
| } | |
| static char * | |
| ieee80211_bss(struct wiphy *wiphy, struct iw_request_info *info, | |
| struct cfg80211_internal_bss *bss, char *current_ev, | |
| char *end_buf) | |
| { | |
| const struct cfg80211_bss_ies *ies; | |
| struct iw_event iwe; | |
| const u8 *ie; | |
| u8 *buf, *cfg, *p; | |
| int rem, i, sig; | |
| bool ismesh = false; | |
| memset(&iwe, 0, sizeof(iwe)); | |
| iwe.cmd = SIOCGIWAP; | |
| iwe.u.ap_addr.sa_family = ARPHRD_ETHER; | |
| memcpy(iwe.u.ap_addr.sa_data, bss->pub.bssid, ETH_ALEN); | |
| current_ev = iwe_stream_add_event(info, current_ev, end_buf, &iwe, | |
| IW_EV_ADDR_LEN); | |
| memset(&iwe, 0, sizeof(iwe)); | |
| iwe.cmd = SIOCGIWFREQ; | |
| iwe.u.freq.m = ieee80211_frequency_to_channel(bss->pub.channel->center_freq); | |
| iwe.u.freq.e = 0; | |
| current_ev = iwe_stream_add_event(info, current_ev, end_buf, &iwe, | |
| IW_EV_FREQ_LEN); | |
| memset(&iwe, 0, sizeof(iwe)); | |
| iwe.cmd = SIOCGIWFREQ; | |
| iwe.u.freq.m = bss->pub.channel->center_freq; | |
| iwe.u.freq.e = 6; | |
| current_ev = iwe_stream_add_event(info, current_ev, end_buf, &iwe, | |
| IW_EV_FREQ_LEN); | |
| if (wiphy->signal_type != CFG80211_SIGNAL_TYPE_NONE) { | |
| memset(&iwe, 0, sizeof(iwe)); | |
| iwe.cmd = IWEVQUAL; | |
| iwe.u.qual.updated = IW_QUAL_LEVEL_UPDATED | | |
| IW_QUAL_NOISE_INVALID | | |
| IW_QUAL_QUAL_UPDATED; | |
| switch (wiphy->signal_type) { | |
| case CFG80211_SIGNAL_TYPE_MBM: | |
| sig = bss->pub.signal / 100; | |
| iwe.u.qual.level = sig; | |
| iwe.u.qual.updated |= IW_QUAL_DBM; | |
| if (sig < -110) /* rather bad */ | |
| sig = -110; | |
| else if (sig > -40) /* perfect */ | |
| sig = -40; | |
| /* will give a range of 0 .. 70 */ | |
| iwe.u.qual.qual = sig + 110; | |
| break; | |
| case CFG80211_SIGNAL_TYPE_UNSPEC: | |
| iwe.u.qual.level = bss->pub.signal; | |
| /* will give range 0 .. 100 */ | |
| iwe.u.qual.qual = bss->pub.signal; | |
| break; | |
| default: | |
| /* not reached */ | |
| break; | |
| } | |
| current_ev = iwe_stream_add_event(info, current_ev, end_buf, | |
| &iwe, IW_EV_QUAL_LEN); | |
| } | |
| memset(&iwe, 0, sizeof(iwe)); | |
| iwe.cmd = SIOCGIWENCODE; | |
| if (bss->pub.capability & WLAN_CAPABILITY_PRIVACY) | |
| iwe.u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY; | |
| else | |
| iwe.u.data.flags = IW_ENCODE_DISABLED; | |
| iwe.u.data.length = 0; | |
| current_ev = iwe_stream_add_point(info, current_ev, end_buf, | |
| &iwe, ""); | |
| rcu_read_lock(); | |
| ies = rcu_dereference(bss->pub.ies); | |
| rem = ies->len; | |
| ie = ies->data; | |
| while (rem >= 2) { | |
| /* invalid data */ | |
| if (ie[1] > rem - 2) | |
| break; | |
| switch (ie[0]) { | |
| case WLAN_EID_SSID: | |
| memset(&iwe, 0, sizeof(iwe)); | |
| iwe.cmd = SIOCGIWESSID; | |
| iwe.u.data.length = ie[1]; | |
| iwe.u.data.flags = 1; | |
| current_ev = iwe_stream_add_point(info, current_ev, end_buf, | |
| &iwe, (u8 *)ie + 2); | |
| break; | |
| case WLAN_EID_MESH_ID: | |
| memset(&iwe, 0, sizeof(iwe)); | |
| iwe.cmd = SIOCGIWESSID; | |
| iwe.u.data.length = ie[1]; | |
| iwe.u.data.flags = 1; | |
| current_ev = iwe_stream_add_point(info, current_ev, end_buf, | |
| &iwe, (u8 *)ie + 2); | |
| break; | |
| case WLAN_EID_MESH_CONFIG: | |
| ismesh = true; | |
| if (ie[1] != sizeof(struct ieee80211_meshconf_ie)) | |
| break; | |
| buf = kmalloc(50, GFP_ATOMIC); | |
| if (!buf) | |
| break; | |
| cfg = (u8 *)ie + 2; | |
| memset(&iwe, 0, sizeof(iwe)); | |
| iwe.cmd = IWEVCUSTOM; | |
| sprintf(buf, "Mesh Network Path Selection Protocol ID: " | |
| "0x%02X", cfg[0]); | |
| iwe.u.data.length = strlen(buf); | |
| current_ev = iwe_stream_add_point(info, current_ev, | |
| end_buf, | |
| &iwe, buf); | |
| sprintf(buf, "Path Selection Metric ID: 0x%02X", | |
| cfg[1]); | |
| iwe.u.data.length = strlen(buf); | |
| current_ev = iwe_stream_add_point(info, current_ev, | |
| end_buf, | |
| &iwe, buf); | |
| sprintf(buf, "Congestion Control Mode ID: 0x%02X", | |
| cfg[2]); | |
| iwe.u.data.length = strlen(buf); | |
| current_ev = iwe_stream_add_point(info, current_ev, | |
| end_buf, | |
| &iwe, buf); | |
| sprintf(buf, "Synchronization ID: 0x%02X", cfg[3]); | |
| iwe.u.data.length = strlen(buf); | |
| current_ev = iwe_stream_add_point(info, current_ev, | |
| end_buf, | |
| &iwe, buf); | |
| sprintf(buf, "Authentication ID: 0x%02X", cfg[4]); | |
| iwe.u.data.length = strlen(buf); | |
| current_ev = iwe_stream_add_point(info, current_ev, | |
| end_buf, | |
| &iwe, buf); | |
| sprintf(buf, "Formation Info: 0x%02X", cfg[5]); | |
| iwe.u.data.length = strlen(buf); | |
| current_ev = iwe_stream_add_point(info, current_ev, | |
| end_buf, | |
| &iwe, buf); | |
| sprintf(buf, "Capabilities: 0x%02X", cfg[6]); | |
| iwe.u.data.length = strlen(buf); | |
| current_ev = iwe_stream_add_point(info, current_ev, | |
| end_buf, | |
| &iwe, buf); | |
| kfree(buf); | |
| break; | |
| case WLAN_EID_SUPP_RATES: | |
| case WLAN_EID_EXT_SUPP_RATES: | |
| /* display all supported rates in readable format */ | |
| p = current_ev + iwe_stream_lcp_len(info); | |
| memset(&iwe, 0, sizeof(iwe)); | |
| iwe.cmd = SIOCGIWRATE; | |
| /* Those two flags are ignored... */ | |
| iwe.u.bitrate.fixed = iwe.u.bitrate.disabled = 0; | |
| for (i = 0; i < ie[1]; i++) { | |
| iwe.u.bitrate.value = | |
| ((ie[i + 2] & 0x7f) * 500000); | |
| p = iwe_stream_add_value(info, current_ev, p, | |
| end_buf, &iwe, IW_EV_PARAM_LEN); | |
| } | |
| current_ev = p; | |
| break; | |
| } | |
| rem -= ie[1] + 2; | |
| ie += ie[1] + 2; | |
| } | |
| if (bss->pub.capability & (WLAN_CAPABILITY_ESS | WLAN_CAPABILITY_IBSS) || | |
| ismesh) { | |
| memset(&iwe, 0, sizeof(iwe)); | |
| iwe.cmd = SIOCGIWMODE; | |
| if (ismesh) | |
| iwe.u.mode = IW_MODE_MESH; | |
| else if (bss->pub.capability & WLAN_CAPABILITY_ESS) | |
| iwe.u.mode = IW_MODE_MASTER; | |
| else | |
| iwe.u.mode = IW_MODE_ADHOC; | |
| current_ev = iwe_stream_add_event(info, current_ev, end_buf, | |
| &iwe, IW_EV_UINT_LEN); | |
| } | |
| buf = kmalloc(31, GFP_ATOMIC); | |
| if (buf) { | |
| memset(&iwe, 0, sizeof(iwe)); | |
| iwe.cmd = IWEVCUSTOM; | |
| sprintf(buf, "tsf=%016llx", (unsigned long long)(ies->tsf)); | |
| iwe.u.data.length = strlen(buf); | |
| current_ev = iwe_stream_add_point(info, current_ev, end_buf, | |
| &iwe, buf); | |
| memset(&iwe, 0, sizeof(iwe)); | |
| iwe.cmd = IWEVCUSTOM; | |
| sprintf(buf, " Last beacon: %ums ago", | |
| elapsed_jiffies_msecs(bss->ts)); | |
| iwe.u.data.length = strlen(buf); | |
| current_ev = iwe_stream_add_point(info, current_ev, | |
| end_buf, &iwe, buf); | |
| kfree(buf); | |
| } | |
| ieee80211_scan_add_ies(info, ies, ¤t_ev, end_buf); | |
| rcu_read_unlock(); | |
| return current_ev; | |
| } | |
| static int ieee80211_scan_results(struct cfg80211_registered_device *dev, | |
| struct iw_request_info *info, | |
| char *buf, size_t len) | |
| { | |
| char *current_ev = buf; | |
| char *end_buf = buf + len; | |
| struct cfg80211_internal_bss *bss; | |
| spin_lock_bh(&dev->bss_lock); | |
| cfg80211_bss_expire(dev); | |
| list_for_each_entry(bss, &dev->bss_list, list) { | |
| if (buf + len - current_ev <= IW_EV_ADDR_LEN) { | |
| spin_unlock_bh(&dev->bss_lock); | |
| return -E2BIG; | |
| } | |
| current_ev = ieee80211_bss(&dev->wiphy, info, bss, | |
| current_ev, end_buf); | |
| } | |
| spin_unlock_bh(&dev->bss_lock); | |
| return current_ev - buf; | |
| } | |
| int cfg80211_wext_giwscan(struct net_device *dev, | |
| struct iw_request_info *info, | |
| struct iw_point *data, char *extra) | |
| { | |
| struct cfg80211_registered_device *rdev; | |
| int res; | |
| if (!netif_running(dev)) | |
| return -ENETDOWN; | |
| rdev = cfg80211_get_dev_from_ifindex(dev_net(dev), dev->ifindex); | |
| if (IS_ERR(rdev)) | |
| return PTR_ERR(rdev); | |
| if (rdev->scan_req) | |
| return -EAGAIN; | |
| res = ieee80211_scan_results(rdev, info, extra, data->length); | |
| data->length = 0; | |
| if (res >= 0) { | |
| data->length = res; | |
| res = 0; | |
| } | |
| return res; | |
| } | |
| EXPORT_SYMBOL_GPL(cfg80211_wext_giwscan); | |
| #endif |