| /* | |
| * macsonic.c | |
| * | |
| * (C) 2005 Finn Thain | |
| * | |
| * Converted to DMA API, converted to unified driver model, made it work as | |
| * a module again, and from the mac68k project, introduced more 32-bit cards | |
| * and dhd's support for 16-bit cards. | |
| * | |
| * (C) 1998 Alan Cox | |
| * | |
| * Debugging Andreas Ehliar, Michael Schmitz | |
| * | |
| * Based on code | |
| * (C) 1996 by Thomas Bogendoerfer (tsbogend@bigbug.franken.de) | |
| * | |
| * This driver is based on work from Andreas Busse, but most of | |
| * the code is rewritten. | |
| * | |
| * (C) 1995 by Andreas Busse (andy@waldorf-gmbh.de) | |
| * | |
| * A driver for the Mac onboard Sonic ethernet chip. | |
| * | |
| * 98/12/21 MSch: judged from tests on Q800, it's basically working, | |
| * but eating up both receive and transmit resources | |
| * and duplicating packets. Needs more testing. | |
| * | |
| * 99/01/03 MSch: upgraded to version 0.92 of the core driver, fixed. | |
| * | |
| * 00/10/31 sammy@oh.verio.com: Updated driver for 2.4 kernels, fixed problems | |
| * on centris. | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/module.h> | |
| #include <linux/types.h> | |
| #include <linux/fcntl.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/init.h> | |
| #include <linux/ioport.h> | |
| #include <linux/in.h> | |
| #include <linux/slab.h> | |
| #include <linux/string.h> | |
| #include <linux/delay.h> | |
| #include <linux/nubus.h> | |
| #include <linux/errno.h> | |
| #include <linux/netdevice.h> | |
| #include <linux/etherdevice.h> | |
| #include <linux/skbuff.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/dma-mapping.h> | |
| #include <asm/bootinfo.h> | |
| #include <asm/system.h> | |
| #include <asm/pgtable.h> | |
| #include <asm/io.h> | |
| #include <asm/hwtest.h> | |
| #include <asm/dma.h> | |
| #include <asm/macintosh.h> | |
| #include <asm/macints.h> | |
| #include <asm/mac_via.h> | |
| static char mac_sonic_string[] = "macsonic"; | |
| static struct platform_device *mac_sonic_device; | |
| #include "sonic.h" | |
| /* These should basically be bus-size and endian independent (since | |
| the SONIC is at least smart enough that it uses the same endianness | |
| as the host, unlike certain less enlightened Macintosh NICs) */ | |
| #define SONIC_READ(reg) (nubus_readw(dev->base_addr + (reg * 4) \ | |
| + lp->reg_offset)) | |
| #define SONIC_WRITE(reg,val) (nubus_writew(val, dev->base_addr + (reg * 4) \ | |
| + lp->reg_offset)) | |
| /* use 0 for production, 1 for verification, >1 for debug */ | |
| #ifdef SONIC_DEBUG | |
| static unsigned int sonic_debug = SONIC_DEBUG; | |
| #else | |
| static unsigned int sonic_debug = 1; | |
| #endif | |
| static int sonic_version_printed; | |
| extern int mac_onboard_sonic_probe(struct net_device* dev); | |
| extern int mac_nubus_sonic_probe(struct net_device* dev); | |
| /* For onboard SONIC */ | |
| #define ONBOARD_SONIC_REGISTERS 0x50F0A000 | |
| #define ONBOARD_SONIC_PROM_BASE 0x50f08000 | |
| enum macsonic_type { | |
| MACSONIC_DUODOCK, | |
| MACSONIC_APPLE, | |
| MACSONIC_APPLE16, | |
| MACSONIC_DAYNA, | |
| MACSONIC_DAYNALINK | |
| }; | |
| /* For the built-in SONIC in the Duo Dock */ | |
| #define DUODOCK_SONIC_REGISTERS 0xe10000 | |
| #define DUODOCK_SONIC_PROM_BASE 0xe12000 | |
| /* For Apple-style NuBus SONIC */ | |
| #define APPLE_SONIC_REGISTERS 0 | |
| #define APPLE_SONIC_PROM_BASE 0x40000 | |
| /* Daynalink LC SONIC */ | |
| #define DAYNALINK_PROM_BASE 0x400000 | |
| /* For Dayna-style NuBus SONIC (haven't seen one yet) */ | |
| #define DAYNA_SONIC_REGISTERS 0x180000 | |
| /* This is what OpenBSD says. However, this is definitely in NuBus | |
| ROM space so we should be able to get it by walking the NuBus | |
| resource directories */ | |
| #define DAYNA_SONIC_MAC_ADDR 0xffe004 | |
| #define SONIC_READ_PROM(addr) nubus_readb(prom_addr+addr) | |
| /* | |
| * For reversing the PROM address | |
| */ | |
| static unsigned char nibbletab[] = {0, 8, 4, 12, 2, 10, 6, 14, | |
| 1, 9, 5, 13, 3, 11, 7, 15}; | |
| static inline void bit_reverse_addr(unsigned char addr[6]) | |
| { | |
| int i; | |
| for(i = 0; i < 6; i++) | |
| addr[i] = ((nibbletab[addr[i] & 0xf] << 4) | | |
| nibbletab[(addr[i] >> 4) &0xf]); | |
| } | |
| int __init macsonic_init(struct net_device* dev) | |
| { | |
| struct sonic_local* lp = netdev_priv(dev); | |
| /* Allocate the entire chunk of memory for the descriptors. | |
| Note that this cannot cross a 64K boundary. */ | |
| if ((lp->descriptors = dma_alloc_coherent(lp->device, | |
| SIZEOF_SONIC_DESC * SONIC_BUS_SCALE(lp->dma_bitmode), | |
| &lp->descriptors_laddr, GFP_KERNEL)) == NULL) { | |
| printk(KERN_ERR "%s: couldn't alloc DMA memory for descriptors.\n", lp->device->bus_id); | |
| return -ENOMEM; | |
| } | |
| /* Now set up the pointers to point to the appropriate places */ | |
| lp->cda = lp->descriptors; | |
| lp->tda = lp->cda + (SIZEOF_SONIC_CDA | |
| * SONIC_BUS_SCALE(lp->dma_bitmode)); | |
| lp->rda = lp->tda + (SIZEOF_SONIC_TD * SONIC_NUM_TDS | |
| * SONIC_BUS_SCALE(lp->dma_bitmode)); | |
| lp->rra = lp->rda + (SIZEOF_SONIC_RD * SONIC_NUM_RDS | |
| * SONIC_BUS_SCALE(lp->dma_bitmode)); | |
| lp->cda_laddr = lp->descriptors_laddr; | |
| lp->tda_laddr = lp->cda_laddr + (SIZEOF_SONIC_CDA | |
| * SONIC_BUS_SCALE(lp->dma_bitmode)); | |
| lp->rda_laddr = lp->tda_laddr + (SIZEOF_SONIC_TD * SONIC_NUM_TDS | |
| * SONIC_BUS_SCALE(lp->dma_bitmode)); | |
| lp->rra_laddr = lp->rda_laddr + (SIZEOF_SONIC_RD * SONIC_NUM_RDS | |
| * SONIC_BUS_SCALE(lp->dma_bitmode)); | |
| dev->open = sonic_open; | |
| dev->stop = sonic_close; | |
| dev->hard_start_xmit = sonic_send_packet; | |
| dev->get_stats = sonic_get_stats; | |
| dev->set_multicast_list = &sonic_multicast_list; | |
| dev->tx_timeout = sonic_tx_timeout; | |
| dev->watchdog_timeo = TX_TIMEOUT; | |
| /* | |
| * clear tally counter | |
| */ | |
| SONIC_WRITE(SONIC_CRCT, 0xffff); | |
| SONIC_WRITE(SONIC_FAET, 0xffff); | |
| SONIC_WRITE(SONIC_MPT, 0xffff); | |
| return 0; | |
| } | |
| int __init mac_onboard_sonic_ethernet_addr(struct net_device* dev) | |
| { | |
| struct sonic_local *lp = netdev_priv(dev); | |
| const int prom_addr = ONBOARD_SONIC_PROM_BASE; | |
| int i; | |
| /* On NuBus boards we can sometimes look in the ROM resources. | |
| No such luck for comm-slot/onboard. */ | |
| for(i = 0; i < 6; i++) | |
| dev->dev_addr[i] = SONIC_READ_PROM(i); | |
| /* Most of the time, the address is bit-reversed. The NetBSD | |
| source has a rather long and detailed historical account of | |
| why this is so. */ | |
| if (memcmp(dev->dev_addr, "\x08\x00\x07", 3) && | |
| memcmp(dev->dev_addr, "\x00\xA0\x40", 3) && | |
| memcmp(dev->dev_addr, "\x00\x80\x19", 3) && | |
| memcmp(dev->dev_addr, "\x00\x05\x02", 3)) | |
| bit_reverse_addr(dev->dev_addr); | |
| else | |
| return 0; | |
| /* If we still have what seems to be a bogus address, we'll | |
| look in the CAM. The top entry should be ours. */ | |
| /* Danger! This only works if MacOS has already initialized | |
| the card... */ | |
| if (memcmp(dev->dev_addr, "\x08\x00\x07", 3) && | |
| memcmp(dev->dev_addr, "\x00\xA0\x40", 3) && | |
| memcmp(dev->dev_addr, "\x00\x80\x19", 3) && | |
| memcmp(dev->dev_addr, "\x00\x05\x02", 3)) | |
| { | |
| unsigned short val; | |
| printk(KERN_INFO "macsonic: PROM seems to be wrong, trying CAM entry 15\n"); | |
| SONIC_WRITE(SONIC_CMD, SONIC_CR_RST); | |
| SONIC_WRITE(SONIC_CEP, 15); | |
| val = SONIC_READ(SONIC_CAP2); | |
| dev->dev_addr[5] = val >> 8; | |
| dev->dev_addr[4] = val & 0xff; | |
| val = SONIC_READ(SONIC_CAP1); | |
| dev->dev_addr[3] = val >> 8; | |
| dev->dev_addr[2] = val & 0xff; | |
| val = SONIC_READ(SONIC_CAP0); | |
| dev->dev_addr[1] = val >> 8; | |
| dev->dev_addr[0] = val & 0xff; | |
| printk(KERN_INFO "HW Address from CAM 15: "); | |
| for (i = 0; i < 6; i++) { | |
| printk("%2.2x", dev->dev_addr[i]); | |
| if (i < 5) | |
| printk(":"); | |
| } | |
| printk("\n"); | |
| } else return 0; | |
| if (memcmp(dev->dev_addr, "\x08\x00\x07", 3) && | |
| memcmp(dev->dev_addr, "\x00\xA0\x40", 3) && | |
| memcmp(dev->dev_addr, "\x00\x80\x19", 3) && | |
| memcmp(dev->dev_addr, "\x00\x05\x02", 3)) | |
| { | |
| /* | |
| * Still nonsense ... messed up someplace! | |
| */ | |
| printk(KERN_ERR "macsonic: ERROR (INVALID MAC)\n"); | |
| return -EIO; | |
| } else return 0; | |
| } | |
| int __init mac_onboard_sonic_probe(struct net_device* dev) | |
| { | |
| /* Bwahahaha */ | |
| static int once_is_more_than_enough; | |
| struct sonic_local* lp = netdev_priv(dev); | |
| int sr; | |
| int commslot = 0; | |
| if (once_is_more_than_enough) | |
| return -ENODEV; | |
| once_is_more_than_enough = 1; | |
| if (!MACH_IS_MAC) | |
| return -ENODEV; | |
| if (macintosh_config->ether_type != MAC_ETHER_SONIC) | |
| return -ENODEV; | |
| printk(KERN_INFO "Checking for internal Macintosh ethernet (SONIC).. "); | |
| /* Bogus probing, on the models which may or may not have | |
| Ethernet (BTW, the Ethernet *is* always at the same | |
| address, and nothing else lives there, at least if Apple's | |
| documentation is to be believed) */ | |
| if (macintosh_config->ident == MAC_MODEL_Q630 || | |
| macintosh_config->ident == MAC_MODEL_P588 || | |
| macintosh_config->ident == MAC_MODEL_P575 || | |
| macintosh_config->ident == MAC_MODEL_C610) { | |
| unsigned long flags; | |
| int card_present; | |
| local_irq_save(flags); | |
| card_present = hwreg_present((void*)ONBOARD_SONIC_REGISTERS); | |
| local_irq_restore(flags); | |
| if (!card_present) { | |
| printk("none.\n"); | |
| return -ENODEV; | |
| } | |
| commslot = 1; | |
| } | |
| printk("yes\n"); | |
| /* Danger! My arms are flailing wildly! You *must* set lp->reg_offset | |
| * and dev->base_addr before using SONIC_READ() or SONIC_WRITE() */ | |
| dev->base_addr = ONBOARD_SONIC_REGISTERS; | |
| if (via_alt_mapping) | |
| dev->irq = IRQ_AUTO_3; | |
| else | |
| dev->irq = IRQ_NUBUS_9; | |
| if (!sonic_version_printed) { | |
| printk(KERN_INFO "%s", version); | |
| sonic_version_printed = 1; | |
| } | |
| printk(KERN_INFO "%s: onboard / comm-slot SONIC at 0x%08lx\n", | |
| lp->device->bus_id, dev->base_addr); | |
| /* The PowerBook's SONIC is 16 bit always. */ | |
| if (macintosh_config->ident == MAC_MODEL_PB520) { | |
| lp->reg_offset = 0; | |
| lp->dma_bitmode = SONIC_BITMODE16; | |
| sr = SONIC_READ(SONIC_SR); | |
| } else if (commslot) { | |
| /* Some of the comm-slot cards are 16 bit. But some | |
| of them are not. The 32-bit cards use offset 2 and | |
| have known revisions, we try reading the revision | |
| register at offset 2, if we don't get a known revision | |
| we assume 16 bit at offset 0. */ | |
| lp->reg_offset = 2; | |
| lp->dma_bitmode = SONIC_BITMODE16; | |
| sr = SONIC_READ(SONIC_SR); | |
| if (sr == 0x0004 || sr == 0x0006 || sr == 0x0100 || sr == 0x0101) | |
| /* 83932 is 0x0004 or 0x0006, 83934 is 0x0100 or 0x0101 */ | |
| lp->dma_bitmode = SONIC_BITMODE32; | |
| else { | |
| lp->dma_bitmode = SONIC_BITMODE16; | |
| lp->reg_offset = 0; | |
| sr = SONIC_READ(SONIC_SR); | |
| } | |
| } else { | |
| /* All onboard cards are at offset 2 with 32 bit DMA. */ | |
| lp->reg_offset = 2; | |
| lp->dma_bitmode = SONIC_BITMODE32; | |
| sr = SONIC_READ(SONIC_SR); | |
| } | |
| printk(KERN_INFO | |
| "%s: revision 0x%04x, using %d bit DMA and register offset %d\n", | |
| lp->device->bus_id, sr, lp->dma_bitmode?32:16, lp->reg_offset); | |
| #if 0 /* This is sometimes useful to find out how MacOS configured the card. */ | |
| printk(KERN_INFO "%s: DCR: 0x%04x, DCR2: 0x%04x\n", lp->device->bus_id, | |
| SONIC_READ(SONIC_DCR) & 0xffff, SONIC_READ(SONIC_DCR2) & 0xffff); | |
| #endif | |
| /* Software reset, then initialize control registers. */ | |
| SONIC_WRITE(SONIC_CMD, SONIC_CR_RST); | |
| SONIC_WRITE(SONIC_DCR, SONIC_DCR_EXBUS | SONIC_DCR_BMS | | |
| SONIC_DCR_RFT1 | SONIC_DCR_TFT0 | | |
| (lp->dma_bitmode ? SONIC_DCR_DW : 0)); | |
| /* This *must* be written back to in order to restore the | |
| * extended programmable output bits, as it may not have been | |
| * initialised since the hardware reset. */ | |
| SONIC_WRITE(SONIC_DCR2, 0); | |
| /* Clear *and* disable interrupts to be on the safe side */ | |
| SONIC_WRITE(SONIC_IMR, 0); | |
| SONIC_WRITE(SONIC_ISR, 0x7fff); | |
| /* Now look for the MAC address. */ | |
| if (mac_onboard_sonic_ethernet_addr(dev) != 0) | |
| return -ENODEV; | |
| /* Shared init code */ | |
| return macsonic_init(dev); | |
| } | |
| int __init mac_nubus_sonic_ethernet_addr(struct net_device* dev, | |
| unsigned long prom_addr, | |
| int id) | |
| { | |
| int i; | |
| for(i = 0; i < 6; i++) | |
| dev->dev_addr[i] = SONIC_READ_PROM(i); | |
| /* Some of the addresses are bit-reversed */ | |
| if (id != MACSONIC_DAYNA) | |
| bit_reverse_addr(dev->dev_addr); | |
| return 0; | |
| } | |
| int __init macsonic_ident(struct nubus_dev* ndev) | |
| { | |
| if (ndev->dr_hw == NUBUS_DRHW_ASANTE_LC && | |
| ndev->dr_sw == NUBUS_DRSW_SONIC_LC) | |
| return MACSONIC_DAYNALINK; | |
| if (ndev->dr_hw == NUBUS_DRHW_SONIC && | |
| ndev->dr_sw == NUBUS_DRSW_APPLE) { | |
| /* There has to be a better way to do this... */ | |
| if (strstr(ndev->board->name, "DuoDock")) | |
| return MACSONIC_DUODOCK; | |
| else | |
| return MACSONIC_APPLE; | |
| } | |
| if (ndev->dr_hw == NUBUS_DRHW_SMC9194 && | |
| ndev->dr_sw == NUBUS_DRSW_DAYNA) | |
| return MACSONIC_DAYNA; | |
| if (ndev->dr_hw == NUBUS_DRHW_SONIC_LC && | |
| ndev->dr_sw == 0) { /* huh? */ | |
| return MACSONIC_APPLE16; | |
| } | |
| return -1; | |
| } | |
| int __init mac_nubus_sonic_probe(struct net_device* dev) | |
| { | |
| static int slots; | |
| struct nubus_dev* ndev = NULL; | |
| struct sonic_local* lp = netdev_priv(dev); | |
| unsigned long base_addr, prom_addr; | |
| u16 sonic_dcr; | |
| int id = -1; | |
| int reg_offset, dma_bitmode; | |
| /* Find the first SONIC that hasn't been initialized already */ | |
| while ((ndev = nubus_find_type(NUBUS_CAT_NETWORK, | |
| NUBUS_TYPE_ETHERNET, ndev)) != NULL) | |
| { | |
| /* Have we seen it already? */ | |
| if (slots & (1<<ndev->board->slot)) | |
| continue; | |
| slots |= 1<<ndev->board->slot; | |
| /* Is it one of ours? */ | |
| if ((id = macsonic_ident(ndev)) != -1) | |
| break; | |
| } | |
| if (ndev == NULL) | |
| return -ENODEV; | |
| switch (id) { | |
| case MACSONIC_DUODOCK: | |
| base_addr = ndev->board->slot_addr + DUODOCK_SONIC_REGISTERS; | |
| prom_addr = ndev->board->slot_addr + DUODOCK_SONIC_PROM_BASE; | |
| sonic_dcr = SONIC_DCR_EXBUS | SONIC_DCR_RFT0 | SONIC_DCR_RFT1 | | |
| SONIC_DCR_TFT0; | |
| reg_offset = 2; | |
| dma_bitmode = SONIC_BITMODE32; | |
| break; | |
| case MACSONIC_APPLE: | |
| base_addr = ndev->board->slot_addr + APPLE_SONIC_REGISTERS; | |
| prom_addr = ndev->board->slot_addr + APPLE_SONIC_PROM_BASE; | |
| sonic_dcr = SONIC_DCR_BMS | SONIC_DCR_RFT1 | SONIC_DCR_TFT0; | |
| reg_offset = 0; | |
| dma_bitmode = SONIC_BITMODE32; | |
| break; | |
| case MACSONIC_APPLE16: | |
| base_addr = ndev->board->slot_addr + APPLE_SONIC_REGISTERS; | |
| prom_addr = ndev->board->slot_addr + APPLE_SONIC_PROM_BASE; | |
| sonic_dcr = SONIC_DCR_EXBUS | SONIC_DCR_RFT1 | SONIC_DCR_TFT0 | | |
| SONIC_DCR_PO1 | SONIC_DCR_BMS; | |
| reg_offset = 0; | |
| dma_bitmode = SONIC_BITMODE16; | |
| break; | |
| case MACSONIC_DAYNALINK: | |
| base_addr = ndev->board->slot_addr + APPLE_SONIC_REGISTERS; | |
| prom_addr = ndev->board->slot_addr + DAYNALINK_PROM_BASE; | |
| sonic_dcr = SONIC_DCR_RFT1 | SONIC_DCR_TFT0 | | |
| SONIC_DCR_PO1 | SONIC_DCR_BMS; | |
| reg_offset = 0; | |
| dma_bitmode = SONIC_BITMODE16; | |
| break; | |
| case MACSONIC_DAYNA: | |
| base_addr = ndev->board->slot_addr + DAYNA_SONIC_REGISTERS; | |
| prom_addr = ndev->board->slot_addr + DAYNA_SONIC_MAC_ADDR; | |
| sonic_dcr = SONIC_DCR_BMS | | |
| SONIC_DCR_RFT1 | SONIC_DCR_TFT0 | SONIC_DCR_PO1; | |
| reg_offset = 0; | |
| dma_bitmode = SONIC_BITMODE16; | |
| break; | |
| default: | |
| printk(KERN_ERR "macsonic: WTF, id is %d\n", id); | |
| return -ENODEV; | |
| } | |
| /* Danger! My arms are flailing wildly! You *must* set lp->reg_offset | |
| * and dev->base_addr before using SONIC_READ() or SONIC_WRITE() */ | |
| dev->base_addr = base_addr; | |
| lp->reg_offset = reg_offset; | |
| lp->dma_bitmode = dma_bitmode; | |
| dev->irq = SLOT2IRQ(ndev->board->slot); | |
| if (!sonic_version_printed) { | |
| printk(KERN_INFO "%s", version); | |
| sonic_version_printed = 1; | |
| } | |
| printk(KERN_INFO "%s: %s in slot %X\n", | |
| lp->device->bus_id, ndev->board->name, ndev->board->slot); | |
| printk(KERN_INFO "%s: revision 0x%04x, using %d bit DMA and register offset %d\n", | |
| lp->device->bus_id, SONIC_READ(SONIC_SR), dma_bitmode?32:16, reg_offset); | |
| #if 0 /* This is sometimes useful to find out how MacOS configured the card. */ | |
| printk(KERN_INFO "%s: DCR: 0x%04x, DCR2: 0x%04x\n", lp->device->bus_id, | |
| SONIC_READ(SONIC_DCR) & 0xffff, SONIC_READ(SONIC_DCR2) & 0xffff); | |
| #endif | |
| /* Software reset, then initialize control registers. */ | |
| SONIC_WRITE(SONIC_CMD, SONIC_CR_RST); | |
| SONIC_WRITE(SONIC_DCR, sonic_dcr | (dma_bitmode ? SONIC_DCR_DW : 0)); | |
| /* This *must* be written back to in order to restore the | |
| * extended programmable output bits, since it may not have been | |
| * initialised since the hardware reset. */ | |
| SONIC_WRITE(SONIC_DCR2, 0); | |
| /* Clear *and* disable interrupts to be on the safe side */ | |
| SONIC_WRITE(SONIC_IMR, 0); | |
| SONIC_WRITE(SONIC_ISR, 0x7fff); | |
| /* Now look for the MAC address. */ | |
| if (mac_nubus_sonic_ethernet_addr(dev, prom_addr, id) != 0) | |
| return -ENODEV; | |
| /* Shared init code */ | |
| return macsonic_init(dev); | |
| } | |
| static int __init mac_sonic_probe(struct platform_device *device) | |
| { | |
| struct net_device *dev; | |
| struct sonic_local *lp; | |
| int err; | |
| int i; | |
| dev = alloc_etherdev(sizeof(struct sonic_local)); | |
| if (!dev) | |
| return -ENOMEM; | |
| lp = netdev_priv(dev); | |
| lp->device = &device->dev; | |
| SET_NETDEV_DEV(dev, &device->dev); | |
| SET_MODULE_OWNER(dev); | |
| /* This will catch fatal stuff like -ENOMEM as well as success */ | |
| err = mac_onboard_sonic_probe(dev); | |
| if (err == 0) | |
| goto found; | |
| if (err != -ENODEV) | |
| goto out; | |
| err = mac_nubus_sonic_probe(dev); | |
| if (err) | |
| goto out; | |
| found: | |
| err = register_netdev(dev); | |
| if (err) | |
| goto out; | |
| printk("%s: MAC ", dev->name); | |
| for (i = 0; i < 6; i++) { | |
| printk("%2.2x", dev->dev_addr[i]); | |
| if (i < 5) | |
| printk(":"); | |
| } | |
| printk(" IRQ %d\n", dev->irq); | |
| return 0; | |
| out: | |
| free_netdev(dev); | |
| return err; | |
| } | |
| MODULE_DESCRIPTION("Macintosh SONIC ethernet driver"); | |
| module_param(sonic_debug, int, 0); | |
| MODULE_PARM_DESC(sonic_debug, "macsonic debug level (1-4)"); | |
| #define SONIC_IRQ_FLAG IRQ_FLG_FAST | |
| #include "sonic.c" | |
| static int __devexit mac_sonic_device_remove (struct platform_device *device) | |
| { | |
| struct net_device *dev = platform_get_drvdata(device); | |
| struct sonic_local* lp = netdev_priv(dev); | |
| unregister_netdev (dev); | |
| dma_free_coherent(lp->device, SIZEOF_SONIC_DESC * SONIC_BUS_SCALE(lp->dma_bitmode), | |
| lp->descriptors, lp->descriptors_laddr); | |
| free_netdev (dev); | |
| return 0; | |
| } | |
| static struct platform_driver mac_sonic_driver = { | |
| .probe = mac_sonic_probe, | |
| .remove = __devexit_p(mac_sonic_device_remove), | |
| .driver = { | |
| .name = mac_sonic_string, | |
| }, | |
| }; | |
| static int __init mac_sonic_init_module(void) | |
| { | |
| int err; | |
| if ((err = platform_driver_register(&mac_sonic_driver))) { | |
| printk(KERN_ERR "Driver registration failed\n"); | |
| return err; | |
| } | |
| mac_sonic_device = platform_device_alloc(mac_sonic_string, 0); | |
| if (!mac_sonic_device) { | |
| goto out_unregister; | |
| } | |
| if (platform_device_add(mac_sonic_device)) { | |
| platform_device_put(mac_sonic_device); | |
| mac_sonic_device = NULL; | |
| } | |
| return 0; | |
| out_unregister: | |
| platform_driver_unregister(&mac_sonic_driver); | |
| return -ENOMEM; | |
| } | |
| static void __exit mac_sonic_cleanup_module(void) | |
| { | |
| platform_driver_unregister(&mac_sonic_driver); | |
| if (mac_sonic_device) { | |
| platform_device_unregister(mac_sonic_device); | |
| mac_sonic_device = NULL; | |
| } | |
| } | |
| module_init(mac_sonic_init_module); | |
| module_exit(mac_sonic_cleanup_module); |