| /* | |
| * ati_remote2 - ATI/Philips USB RF remote driver | |
| * | |
| * Copyright (C) 2005 Ville Syrjala <syrjala@sci.fi> | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License version 2 | |
| * as published by the Free Software Foundation. | |
| */ | |
| #include <linux/usb/input.h> | |
| #define DRIVER_DESC "ATI/Philips USB RF remote driver" | |
| #define DRIVER_VERSION "0.1" | |
| MODULE_DESCRIPTION(DRIVER_DESC); | |
| MODULE_VERSION(DRIVER_VERSION); | |
| MODULE_AUTHOR("Ville Syrjala <syrjala@sci.fi>"); | |
| MODULE_LICENSE("GPL"); | |
| static unsigned int mode_mask = 0x1F; | |
| module_param(mode_mask, uint, 0644); | |
| MODULE_PARM_DESC(mode_mask, "Bitmask of modes to accept <4:PC><3:AUX4><2:AUX3><1:AUX2><0:AUX1>"); | |
| static struct usb_device_id ati_remote2_id_table[] = { | |
| { USB_DEVICE(0x0471, 0x0602) }, /* ATI Remote Wonder II */ | |
| { } | |
| }; | |
| MODULE_DEVICE_TABLE(usb, ati_remote2_id_table); | |
| static struct { | |
| int hw_code; | |
| int key_code; | |
| } ati_remote2_key_table[] = { | |
| { 0x00, KEY_0 }, | |
| { 0x01, KEY_1 }, | |
| { 0x02, KEY_2 }, | |
| { 0x03, KEY_3 }, | |
| { 0x04, KEY_4 }, | |
| { 0x05, KEY_5 }, | |
| { 0x06, KEY_6 }, | |
| { 0x07, KEY_7 }, | |
| { 0x08, KEY_8 }, | |
| { 0x09, KEY_9 }, | |
| { 0x0c, KEY_POWER }, | |
| { 0x0d, KEY_MUTE }, | |
| { 0x10, KEY_VOLUMEUP }, | |
| { 0x11, KEY_VOLUMEDOWN }, | |
| { 0x20, KEY_CHANNELUP }, | |
| { 0x21, KEY_CHANNELDOWN }, | |
| { 0x28, KEY_FORWARD }, | |
| { 0x29, KEY_REWIND }, | |
| { 0x2c, KEY_PLAY }, | |
| { 0x30, KEY_PAUSE }, | |
| { 0x31, KEY_STOP }, | |
| { 0x37, KEY_RECORD }, | |
| { 0x38, KEY_DVD }, | |
| { 0x39, KEY_TV }, | |
| { 0x54, KEY_MENU }, | |
| { 0x58, KEY_UP }, | |
| { 0x59, KEY_DOWN }, | |
| { 0x5a, KEY_LEFT }, | |
| { 0x5b, KEY_RIGHT }, | |
| { 0x5c, KEY_OK }, | |
| { 0x78, KEY_A }, | |
| { 0x79, KEY_B }, | |
| { 0x7a, KEY_C }, | |
| { 0x7b, KEY_D }, | |
| { 0x7c, KEY_E }, | |
| { 0x7d, KEY_F }, | |
| { 0x82, KEY_ENTER }, | |
| { 0x8e, KEY_VENDOR }, | |
| { 0x96, KEY_COFFEE }, | |
| { 0xa9, BTN_LEFT }, | |
| { 0xaa, BTN_RIGHT }, | |
| { 0xbe, KEY_QUESTION }, | |
| { 0xd5, KEY_FRONT }, | |
| { 0xd0, KEY_EDIT }, | |
| { 0xf9, KEY_INFO }, | |
| { (0x00 << 8) | 0x3f, KEY_PROG1 }, | |
| { (0x01 << 8) | 0x3f, KEY_PROG2 }, | |
| { (0x02 << 8) | 0x3f, KEY_PROG3 }, | |
| { (0x03 << 8) | 0x3f, KEY_PROG4 }, | |
| { (0x04 << 8) | 0x3f, KEY_PC }, | |
| { 0, KEY_RESERVED } | |
| }; | |
| struct ati_remote2 { | |
| struct input_dev *idev; | |
| struct usb_device *udev; | |
| struct usb_interface *intf[2]; | |
| struct usb_endpoint_descriptor *ep[2]; | |
| struct urb *urb[2]; | |
| void *buf[2]; | |
| dma_addr_t buf_dma[2]; | |
| unsigned long jiffies; | |
| int mode; | |
| char name[64]; | |
| char phys[64]; | |
| }; | |
| static int ati_remote2_probe(struct usb_interface *interface, const struct usb_device_id *id); | |
| static void ati_remote2_disconnect(struct usb_interface *interface); | |
| static struct usb_driver ati_remote2_driver = { | |
| .name = "ati_remote2", | |
| .probe = ati_remote2_probe, | |
| .disconnect = ati_remote2_disconnect, | |
| .id_table = ati_remote2_id_table, | |
| }; | |
| static int ati_remote2_open(struct input_dev *idev) | |
| { | |
| struct ati_remote2 *ar2 = idev->private; | |
| int r; | |
| r = usb_submit_urb(ar2->urb[0], GFP_KERNEL); | |
| if (r) { | |
| dev_err(&ar2->intf[0]->dev, | |
| "%s: usb_submit_urb() = %d\n", __FUNCTION__, r); | |
| return r; | |
| } | |
| r = usb_submit_urb(ar2->urb[1], GFP_KERNEL); | |
| if (r) { | |
| usb_kill_urb(ar2->urb[0]); | |
| dev_err(&ar2->intf[1]->dev, | |
| "%s: usb_submit_urb() = %d\n", __FUNCTION__, r); | |
| return r; | |
| } | |
| return 0; | |
| } | |
| static void ati_remote2_close(struct input_dev *idev) | |
| { | |
| struct ati_remote2 *ar2 = idev->private; | |
| usb_kill_urb(ar2->urb[0]); | |
| usb_kill_urb(ar2->urb[1]); | |
| } | |
| static void ati_remote2_input_mouse(struct ati_remote2 *ar2, struct pt_regs *regs) | |
| { | |
| struct input_dev *idev = ar2->idev; | |
| u8 *data = ar2->buf[0]; | |
| if (data[0] > 4) { | |
| dev_err(&ar2->intf[0]->dev, | |
| "Unknown mode byte (%02x %02x %02x %02x)\n", | |
| data[3], data[2], data[1], data[0]); | |
| return; | |
| } | |
| if (!((1 << data[0]) & mode_mask)) | |
| return; | |
| input_regs(idev, regs); | |
| input_event(idev, EV_REL, REL_X, (s8) data[1]); | |
| input_event(idev, EV_REL, REL_Y, (s8) data[2]); | |
| input_sync(idev); | |
| } | |
| static int ati_remote2_lookup(unsigned int hw_code) | |
| { | |
| int i; | |
| for (i = 0; ati_remote2_key_table[i].key_code != KEY_RESERVED; i++) | |
| if (ati_remote2_key_table[i].hw_code == hw_code) | |
| return i; | |
| return -1; | |
| } | |
| static void ati_remote2_input_key(struct ati_remote2 *ar2, struct pt_regs *regs) | |
| { | |
| struct input_dev *idev = ar2->idev; | |
| u8 *data = ar2->buf[1]; | |
| int hw_code, index; | |
| if (data[0] > 4) { | |
| dev_err(&ar2->intf[1]->dev, | |
| "Unknown mode byte (%02x %02x %02x %02x)\n", | |
| data[3], data[2], data[1], data[0]); | |
| return; | |
| } | |
| hw_code = data[2]; | |
| /* | |
| * Mode keys (AUX1-AUX4, PC) all generate the same code byte. | |
| * Use the mode byte to figure out which one was pressed. | |
| */ | |
| if (hw_code == 0x3f) { | |
| /* | |
| * For some incomprehensible reason the mouse pad generates | |
| * events which look identical to the events from the last | |
| * pressed mode key. Naturally we don't want to generate key | |
| * events for the mouse pad so we filter out any subsequent | |
| * events from the same mode key. | |
| */ | |
| if (ar2->mode == data[0]) | |
| return; | |
| if (data[1] == 0) | |
| ar2->mode = data[0]; | |
| hw_code |= data[0] << 8; | |
| } | |
| if (!((1 << data[0]) & mode_mask)) | |
| return; | |
| index = ati_remote2_lookup(hw_code); | |
| if (index < 0) { | |
| dev_err(&ar2->intf[1]->dev, | |
| "Unknown code byte (%02x %02x %02x %02x)\n", | |
| data[3], data[2], data[1], data[0]); | |
| return; | |
| } | |
| switch (data[1]) { | |
| case 0: /* release */ | |
| break; | |
| case 1: /* press */ | |
| ar2->jiffies = jiffies + msecs_to_jiffies(idev->rep[REP_DELAY]); | |
| break; | |
| case 2: /* repeat */ | |
| /* No repeat for mouse buttons. */ | |
| if (ati_remote2_key_table[index].key_code == BTN_LEFT || | |
| ati_remote2_key_table[index].key_code == BTN_RIGHT) | |
| return; | |
| if (!time_after_eq(jiffies, ar2->jiffies)) | |
| return; | |
| ar2->jiffies = jiffies + msecs_to_jiffies(idev->rep[REP_PERIOD]); | |
| break; | |
| default: | |
| dev_err(&ar2->intf[1]->dev, | |
| "Unknown state byte (%02x %02x %02x %02x)\n", | |
| data[3], data[2], data[1], data[0]); | |
| return; | |
| } | |
| input_regs(idev, regs); | |
| input_event(idev, EV_KEY, ati_remote2_key_table[index].key_code, data[1]); | |
| input_sync(idev); | |
| } | |
| static void ati_remote2_complete_mouse(struct urb *urb, struct pt_regs *regs) | |
| { | |
| struct ati_remote2 *ar2 = urb->context; | |
| int r; | |
| switch (urb->status) { | |
| case 0: | |
| ati_remote2_input_mouse(ar2, regs); | |
| break; | |
| case -ENOENT: | |
| case -EILSEQ: | |
| case -ECONNRESET: | |
| case -ESHUTDOWN: | |
| dev_dbg(&ar2->intf[0]->dev, | |
| "%s(): urb status = %d\n", __FUNCTION__, urb->status); | |
| return; | |
| default: | |
| dev_err(&ar2->intf[0]->dev, | |
| "%s(): urb status = %d\n", __FUNCTION__, urb->status); | |
| } | |
| r = usb_submit_urb(urb, GFP_ATOMIC); | |
| if (r) | |
| dev_err(&ar2->intf[0]->dev, | |
| "%s(): usb_submit_urb() = %d\n", __FUNCTION__, r); | |
| } | |
| static void ati_remote2_complete_key(struct urb *urb, struct pt_regs *regs) | |
| { | |
| struct ati_remote2 *ar2 = urb->context; | |
| int r; | |
| switch (urb->status) { | |
| case 0: | |
| ati_remote2_input_key(ar2, regs); | |
| break; | |
| case -ENOENT: | |
| case -EILSEQ: | |
| case -ECONNRESET: | |
| case -ESHUTDOWN: | |
| dev_dbg(&ar2->intf[1]->dev, | |
| "%s(): urb status = %d\n", __FUNCTION__, urb->status); | |
| return; | |
| default: | |
| dev_err(&ar2->intf[1]->dev, | |
| "%s(): urb status = %d\n", __FUNCTION__, urb->status); | |
| } | |
| r = usb_submit_urb(urb, GFP_ATOMIC); | |
| if (r) | |
| dev_err(&ar2->intf[1]->dev, | |
| "%s(): usb_submit_urb() = %d\n", __FUNCTION__, r); | |
| } | |
| static int ati_remote2_input_init(struct ati_remote2 *ar2) | |
| { | |
| struct input_dev *idev; | |
| int i; | |
| idev = input_allocate_device(); | |
| if (!idev) | |
| return -ENOMEM; | |
| ar2->idev = idev; | |
| idev->private = ar2; | |
| idev->evbit[0] = BIT(EV_KEY) | BIT(EV_REP) | BIT(EV_REL); | |
| idev->keybit[LONG(BTN_MOUSE)] = BIT(BTN_LEFT) | BIT(BTN_RIGHT); | |
| idev->relbit[0] = BIT(REL_X) | BIT(REL_Y); | |
| for (i = 0; ati_remote2_key_table[i].key_code != KEY_RESERVED; i++) | |
| set_bit(ati_remote2_key_table[i].key_code, idev->keybit); | |
| idev->rep[REP_DELAY] = 250; | |
| idev->rep[REP_PERIOD] = 33; | |
| idev->open = ati_remote2_open; | |
| idev->close = ati_remote2_close; | |
| idev->name = ar2->name; | |
| idev->phys = ar2->phys; | |
| usb_to_input_id(ar2->udev, &idev->id); | |
| idev->cdev.dev = &ar2->udev->dev; | |
| i = input_register_device(idev); | |
| if (i) | |
| input_free_device(idev); | |
| return i; | |
| } | |
| static int ati_remote2_urb_init(struct ati_remote2 *ar2) | |
| { | |
| struct usb_device *udev = ar2->udev; | |
| int i, pipe, maxp; | |
| for (i = 0; i < 2; i++) { | |
| ar2->buf[i] = usb_buffer_alloc(udev, 4, GFP_KERNEL, &ar2->buf_dma[i]); | |
| if (!ar2->buf[i]) | |
| return -ENOMEM; | |
| ar2->urb[i] = usb_alloc_urb(0, GFP_KERNEL); | |
| if (!ar2->urb[i]) | |
| return -ENOMEM; | |
| pipe = usb_rcvintpipe(udev, ar2->ep[i]->bEndpointAddress); | |
| maxp = usb_maxpacket(udev, pipe, usb_pipeout(pipe)); | |
| maxp = maxp > 4 ? 4 : maxp; | |
| usb_fill_int_urb(ar2->urb[i], udev, pipe, ar2->buf[i], maxp, | |
| i ? ati_remote2_complete_key : ati_remote2_complete_mouse, | |
| ar2, ar2->ep[i]->bInterval); | |
| ar2->urb[i]->transfer_dma = ar2->buf_dma[i]; | |
| ar2->urb[i]->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; | |
| } | |
| return 0; | |
| } | |
| static void ati_remote2_urb_cleanup(struct ati_remote2 *ar2) | |
| { | |
| int i; | |
| for (i = 0; i < 2; i++) { | |
| if (ar2->urb[i]) | |
| usb_free_urb(ar2->urb[i]); | |
| if (ar2->buf[i]) | |
| usb_buffer_free(ar2->udev, 4, ar2->buf[i], ar2->buf_dma[i]); | |
| } | |
| } | |
| static int ati_remote2_probe(struct usb_interface *interface, const struct usb_device_id *id) | |
| { | |
| struct usb_device *udev = interface_to_usbdev(interface); | |
| struct usb_host_interface *alt = interface->cur_altsetting; | |
| struct ati_remote2 *ar2; | |
| int r; | |
| if (alt->desc.bInterfaceNumber) | |
| return -ENODEV; | |
| ar2 = kzalloc(sizeof (struct ati_remote2), GFP_KERNEL); | |
| if (!ar2) | |
| return -ENOMEM; | |
| ar2->udev = udev; | |
| ar2->intf[0] = interface; | |
| ar2->ep[0] = &alt->endpoint[0].desc; | |
| ar2->intf[1] = usb_ifnum_to_if(udev, 1); | |
| r = usb_driver_claim_interface(&ati_remote2_driver, ar2->intf[1], ar2); | |
| if (r) | |
| goto fail1; | |
| alt = ar2->intf[1]->cur_altsetting; | |
| ar2->ep[1] = &alt->endpoint[0].desc; | |
| r = ati_remote2_urb_init(ar2); | |
| if (r) | |
| goto fail2; | |
| usb_make_path(udev, ar2->phys, sizeof(ar2->phys)); | |
| strlcat(ar2->phys, "/input0", sizeof(ar2->phys)); | |
| strlcat(ar2->name, "ATI Remote Wonder II", sizeof(ar2->name)); | |
| r = ati_remote2_input_init(ar2); | |
| if (r) | |
| goto fail2; | |
| usb_set_intfdata(interface, ar2); | |
| return 0; | |
| fail2: | |
| ati_remote2_urb_cleanup(ar2); | |
| usb_driver_release_interface(&ati_remote2_driver, ar2->intf[1]); | |
| fail1: | |
| kfree(ar2); | |
| return r; | |
| } | |
| static void ati_remote2_disconnect(struct usb_interface *interface) | |
| { | |
| struct ati_remote2 *ar2; | |
| struct usb_host_interface *alt = interface->cur_altsetting; | |
| if (alt->desc.bInterfaceNumber) | |
| return; | |
| ar2 = usb_get_intfdata(interface); | |
| usb_set_intfdata(interface, NULL); | |
| input_unregister_device(ar2->idev); | |
| ati_remote2_urb_cleanup(ar2); | |
| usb_driver_release_interface(&ati_remote2_driver, ar2->intf[1]); | |
| kfree(ar2); | |
| } | |
| static int __init ati_remote2_init(void) | |
| { | |
| int r; | |
| r = usb_register(&ati_remote2_driver); | |
| if (r) | |
| printk(KERN_ERR "ati_remote2: usb_register() = %d\n", r); | |
| else | |
| printk(KERN_INFO "ati_remote2: " DRIVER_DESC " " DRIVER_VERSION "\n"); | |
| return r; | |
| } | |
| static void __exit ati_remote2_exit(void) | |
| { | |
| usb_deregister(&ati_remote2_driver); | |
| } | |
| module_init(ati_remote2_init); | |
| module_exit(ati_remote2_exit); |