| # Helper to resolve issues with configs that have SPI enabled but I2C | |
| # modular, meaning we can't build the codec driver in with I2C support. | |
| # We use an ordered list of conditional defaults to pick the appropriate | |
| # setting - SPI can't be modular so that case doesn't need to be covered. | |
| config SND_SOC_I2C_AND_SPI | |
| tristate | |
| default m if I2C=m | |
| default y if I2C=y | |
| default y if SPI_MASTER=y | |
| config SND_SOC_ALL_CODECS | |
| tristate "Build all ASoC CODEC drivers" | |
| select SND_SOC_AC97_CODEC if SND_SOC_AC97_BUS | |
| select SND_SOC_AD1980 if SND_SOC_AC97_BUS | |
| select SND_SOC_AD73311 if I2C | |
| select SND_SOC_AK4535 if I2C | |
| select SND_SOC_CS4270 if I2C | |
| select SND_SOC_PCM3008 | |
| select SND_SOC_SSM2602 if I2C | |
| select SND_SOC_TLV320AIC23 if I2C | |
| select SND_SOC_TLV320AIC26 if SPI_MASTER | |
| select SND_SOC_TLV320AIC3X if I2C | |
| select SND_SOC_TWL4030 if TWL4030_CORE | |
| select SND_SOC_UDA134X | |
| select SND_SOC_UDA1380 if I2C | |
| select SND_SOC_WM8350 if MFD_WM8350 | |
| select SND_SOC_WM8510 if SND_SOC_I2C_AND_SPI | |
| select SND_SOC_WM8580 if I2C | |
| select SND_SOC_WM8728 if SND_SOC_I2C_AND_SPI | |
| select SND_SOC_WM8731 if SND_SOC_I2C_AND_SPI | |
| select SND_SOC_WM8750 if SND_SOC_I2C_AND_SPI | |
| select SND_SOC_WM8753 if SND_SOC_I2C_AND_SPI | |
| select SND_SOC_WM8900 if I2C | |
| select SND_SOC_WM8903 if I2C | |
| select SND_SOC_WM8971 if I2C | |
| select SND_SOC_WM8990 if I2C | |
| select SND_SOC_WM9712 if SND_SOC_AC97_BUS | |
| select SND_SOC_WM9713 if SND_SOC_AC97_BUS | |
| help | |
| Normally ASoC codec drivers are only built if a machine driver which | |
| uses them is also built since they are only usable with a machine | |
| driver. Selecting this option will allow these drivers to be built | |
| without an explicit machine driver for test and development purposes. | |
| Support for the bus types used to access the codecs to be built must | |
| be selected separately. | |
| If unsure select "N". | |
| config SND_SOC_AC97_CODEC | |
| tristate | |
| select SND_AC97_CODEC | |
| config SND_SOC_AD1980 | |
| tristate | |
| config SND_SOC_AD73311 | |
| tristate | |
| config SND_SOC_AK4535 | |
| tristate | |
| # Cirrus Logic CS4270 Codec | |
| config SND_SOC_CS4270 | |
| tristate | |
| # Cirrus Logic CS4270 Codec Hardware Mute Support | |
| # Select if you have external muting circuitry attached to your CS4270. | |
| config SND_SOC_CS4270_HWMUTE | |
| bool | |
| depends on SND_SOC_CS4270 | |
| # Cirrus Logic CS4270 Codec VD = 3.3V Errata | |
| # Select if you are affected by the errata where the part will not function | |
| # if MCLK divide-by-1.5 is selected and VD is set to 3.3V. The driver will | |
| # not select any sample rates that require MCLK to be divided by 1.5. | |
| config SND_SOC_CS4270_VD33_ERRATA | |
| bool | |
| depends on SND_SOC_CS4270 | |
| config SND_SOC_L3 | |
| tristate | |
| config SND_SOC_PCM3008 | |
| tristate | |
| config SND_SOC_SSM2602 | |
| tristate | |
| config SND_SOC_TLV320AIC23 | |
| tristate | |
| depends on I2C | |
| config SND_SOC_TLV320AIC26 | |
| tristate "TI TLV320AIC26 Codec support" if SND_SOC_OF_SIMPLE | |
| depends on SPI | |
| config SND_SOC_TLV320AIC3X | |
| tristate | |
| depends on I2C | |
| config SND_SOC_TWL4030 | |
| tristate | |
| depends on TWL4030_CORE | |
| config SND_SOC_UDA134X | |
| tristate | |
| select SND_SOC_L3 | |
| config SND_SOC_UDA1380 | |
| tristate | |
| config SND_SOC_WM8350 | |
| tristate | |
| config SND_SOC_WM8510 | |
| tristate | |
| config SND_SOC_WM8580 | |
| tristate | |
| config SND_SOC_WM8728 | |
| tristate | |
| config SND_SOC_WM8731 | |
| tristate | |
| config SND_SOC_WM8750 | |
| tristate | |
| config SND_SOC_WM8753 | |
| tristate | |
| config SND_SOC_WM8900 | |
| tristate | |
| config SND_SOC_WM8903 | |
| tristate | |
| config SND_SOC_WM8971 | |
| tristate | |
| config SND_SOC_WM8990 | |
| tristate | |
| config SND_SOC_WM9712 | |
| tristate | |
| config SND_SOC_WM9713 | |
| tristate |