| config MAC80211 | |
| tristate "Generic IEEE 802.11 Networking Stack (mac80211)" | |
| select CRYPTO | |
| select CRYPTO_ECB | |
| select CRYPTO_ARC4 | |
| select CRYPTO_AES | |
| select CRC32 | |
| select WIRELESS_EXT | |
| select CFG80211 | |
| ---help--- | |
| This option enables the hardware independent IEEE 802.11 | |
| networking stack. | |
| menu "Rate control algorithm selection" | |
| depends on MAC80211 != n | |
| config MAC80211_RC_PID | |
| bool "PID controller based rate control algorithm" if EMBEDDED | |
| ---help--- | |
| This option enables a TX rate control algorithm for | |
| mac80211 that uses a PID controller to select the TX | |
| rate. | |
| config MAC80211_RC_MINSTREL | |
| bool "Minstrel" if EMBEDDED | |
| default y | |
| ---help--- | |
| This option enables the 'minstrel' TX rate control algorithm | |
| choice | |
| prompt "Default rate control algorithm" | |
| default MAC80211_RC_DEFAULT_MINSTREL | |
| ---help--- | |
| This option selects the default rate control algorithm | |
| mac80211 will use. Note that this default can still be | |
| overriden through the ieee80211_default_rc_algo module | |
| parameter if different algorithms are available. | |
| config MAC80211_RC_DEFAULT_PID | |
| bool "PID controller based rate control algorithm" | |
| depends on MAC80211_RC_PID | |
| ---help--- | |
| Select the PID controller based rate control as the | |
| default rate control algorithm. You should choose | |
| this unless you know what you are doing. | |
| config MAC80211_RC_DEFAULT_MINSTREL | |
| bool "Minstrel" | |
| depends on MAC80211_RC_MINSTREL | |
| ---help--- | |
| Select Minstrel as the default rate control algorithm. | |
| endchoice | |
| config MAC80211_RC_DEFAULT | |
| string | |
| default "minstrel" if MAC80211_RC_DEFAULT_MINSTREL | |
| default "pid" if MAC80211_RC_DEFAULT_PID | |
| default "" | |
| endmenu | |
| config MAC80211_MESH | |
| bool "Enable mac80211 mesh networking (pre-802.11s) support" | |
| depends on MAC80211 && EXPERIMENTAL | |
| ---help--- | |
| This options enables support of Draft 802.11s mesh networking. | |
| The implementation is based on Draft 1.08 of the Mesh Networking | |
| amendment. For more information visit http://o11s.org/. | |
| config MAC80211_LEDS | |
| bool "Enable LED triggers" | |
| depends on MAC80211 | |
| select NEW_LEDS | |
| select LEDS_TRIGGERS | |
| ---help--- | |
| This option enables a few LED triggers for different | |
| packet receive/transmit events. | |
| config MAC80211_DEBUGFS | |
| bool "Export mac80211 internals in DebugFS" | |
| depends on MAC80211 && DEBUG_FS | |
| ---help--- | |
| Select this to see extensive information about | |
| the internal state of mac80211 in debugfs. | |
| Say N unless you know you need this. | |
| menuconfig MAC80211_DEBUG_MENU | |
| bool "Select mac80211 debugging features" | |
| depends on MAC80211 | |
| ---help--- | |
| This option collects various mac80211 debug settings. | |
| config MAC80211_DEBUG_PACKET_ALIGNMENT | |
| bool "Enable packet alignment debugging" | |
| depends on MAC80211_DEBUG_MENU | |
| ---help--- | |
| This option is recommended for driver authors and strongly | |
| discouraged for everybody else, it will trigger a warning | |
| when a driver hands mac80211 a buffer that is aligned in | |
| a way that will cause problems with the IP stack on some | |
| architectures. | |
| Say N unless you're writing a mac80211 based driver. | |
| config MAC80211_NOINLINE | |
| bool "Do not inline TX/RX handlers" | |
| depends on MAC80211_DEBUG_MENU | |
| ---help--- | |
| This option affects code generation in mac80211, when | |
| selected some functions are marked "noinline" to allow | |
| easier debugging of problems in the transmit and receive | |
| paths. | |
| This option increases code size a bit and inserts a lot | |
| of function calls in the code, but is otherwise safe to | |
| enable. | |
| If unsure, say N unless you expect to be finding problems | |
| in mac80211. | |
| config MAC80211_VERBOSE_DEBUG | |
| bool "Verbose debugging output" | |
| depends on MAC80211_DEBUG_MENU | |
| ---help--- | |
| Selecting this option causes mac80211 to print out | |
| many debugging messages. It should not be selected | |
| on production systems as some of the messages are | |
| remotely triggerable. | |
| Do not select this option. | |
| config MAC80211_HT_DEBUG | |
| bool "Verbose HT debugging" | |
| depends on MAC80211_DEBUG_MENU | |
| ---help--- | |
| This option enables 802.11n High Throughput features | |
| debug tracing output. | |
| It should not be selected on production systems as some | |
| of the messages are remotely triggerable. | |
| Do not select this option. | |
| config MAC80211_TKIP_DEBUG | |
| bool "Verbose TKIP debugging" | |
| depends on MAC80211_DEBUG_MENU | |
| ---help--- | |
| Selecting this option causes mac80211 to print out | |
| very verbose TKIP debugging messages. It should not | |
| be selected on production systems as those messages | |
| are remotely triggerable. | |
| Do not select this option. | |
| config MAC80211_IBSS_DEBUG | |
| bool "Verbose IBSS debugging" | |
| depends on MAC80211_DEBUG_MENU | |
| ---help--- | |
| Selecting this option causes mac80211 to print out | |
| very verbose IBSS debugging messages. It should not | |
| be selected on production systems as those messages | |
| are remotely triggerable. | |
| Do not select this option. | |
| config MAC80211_VERBOSE_PS_DEBUG | |
| bool "Verbose powersave mode debugging" | |
| depends on MAC80211_DEBUG_MENU | |
| ---help--- | |
| Selecting this option causes mac80211 to print out very | |
| verbose power save mode debugging messages (when mac80211 | |
| is an AP and has power saving stations.) | |
| It should not be selected on production systems as those | |
| messages are remotely triggerable. | |
| Do not select this option. | |
| config MAC80211_VERBOSE_MPL_DEBUG | |
| bool "Verbose mesh peer link debugging" | |
| depends on MAC80211_DEBUG_MENU | |
| depends on MAC80211_MESH | |
| ---help--- | |
| Selecting this option causes mac80211 to print out very | |
| verbose mesh peer link debugging messages (when mac80211 | |
| is taking part in a mesh network). | |
| It should not be selected on production systems as those | |
| messages are remotely triggerable. | |
| Do not select this option. | |
| config MAC80211_DEBUG_COUNTERS | |
| bool "Extra statistics for TX/RX debugging" | |
| depends on MAC80211_DEBUG_MENU | |
| depends on MAC80211_DEBUGFS | |
| ---help--- | |
| Selecting this option causes mac80211 to keep additional | |
| and very verbose statistics about TX and RX handler use | |
| and show them in debugfs. | |
| If unsure, say N. | |
| config MAC80211_VERBOSE_SPECT_MGMT_DEBUG | |
| bool "Verbose Spectrum Management (IEEE 802.11h)debugging" | |
| depends on MAC80211_DEBUG_MENU | |
| ---help--- | |
| Say Y here to print out verbose Spectrum Management (IEEE 802.11h) | |
| debug messages. |