| menuconfig RT2X00 | |
| tristate "Ralink driver support" | |
| depends on MAC80211 && WLAN_80211 && EXPERIMENTAL | |
| ---help--- | |
| This will enable the experimental support for the Ralink drivers, | |
| developed in the rt2x00 project <http://rt2x00.serialmonkey.com>. | |
| These drivers make use of the mac80211 stack. | |
| When building one of the individual drivers, the rt2x00 library | |
| will also be created. That library (when the driver is built as | |
| a module) will be called "rt2x00lib.ko". | |
| Additionally PCI and USB libraries will also be build depending | |
| on the types of drivers being selected, these libraries will be | |
| called "rt2x00pci.ko" and "rt2x00usb.ko". | |
| if RT2X00 | |
| config RT2400PCI | |
| tristate "Ralink rt2400 (PCI/PCMCIA) support" | |
| depends on PCI | |
| select RT2X00_LIB_PCI | |
| select EEPROM_93CX6 | |
| ---help--- | |
| This adds support for rt2400 wireless chipset family. | |
| Supported chips: RT2460. | |
| When compiled as a module, this driver will be called "rt2400pci.ko". | |
| config RT2500PCI | |
| tristate "Ralink rt2500 (PCI/PCMCIA) support" | |
| depends on PCI | |
| select RT2X00_LIB_PCI | |
| select EEPROM_93CX6 | |
| ---help--- | |
| This adds support for rt2500 wireless chipset family. | |
| Supported chips: RT2560. | |
| When compiled as a module, this driver will be called "rt2500pci.ko". | |
| config RT61PCI | |
| tristate "Ralink rt2501/rt61 (PCI/PCMCIA) support" | |
| depends on PCI | |
| select RT2X00_LIB_PCI | |
| select RT2X00_LIB_FIRMWARE | |
| select RT2X00_LIB_CRYPTO | |
| select CRC_ITU_T | |
| select EEPROM_93CX6 | |
| ---help--- | |
| This adds support for rt2501 wireless chipset family. | |
| Supported chips: RT2561, RT2561S & RT2661. | |
| When compiled as a module, this driver will be called "rt61pci.ko". | |
| config RT2500USB | |
| tristate "Ralink rt2500 (USB) support" | |
| depends on USB | |
| select RT2X00_LIB_USB | |
| select RT2X00_LIB_CRYPTO | |
| ---help--- | |
| This adds support for rt2500 wireless chipset family. | |
| Supported chips: RT2571 & RT2572. | |
| When compiled as a module, this driver will be called "rt2500usb.ko". | |
| config RT73USB | |
| tristate "Ralink rt2501/rt73 (USB) support" | |
| depends on USB | |
| select RT2X00_LIB_USB | |
| select RT2X00_LIB_FIRMWARE | |
| select RT2X00_LIB_CRYPTO | |
| select CRC_ITU_T | |
| ---help--- | |
| This adds support for rt2501 wireless chipset family. | |
| Supported chips: RT2571W, RT2573 & RT2671. | |
| When compiled as a module, this driver will be called "rt73usb.ko". | |
| config RT2X00_LIB_PCI | |
| tristate | |
| select RT2X00_LIB | |
| config RT2X00_LIB_USB | |
| tristate | |
| select RT2X00_LIB | |
| config RT2X00_LIB | |
| tristate | |
| config RT2X00_LIB_FIRMWARE | |
| boolean | |
| select FW_LOADER | |
| config RT2X00_LIB_CRYPTO | |
| boolean | |
| config RT2X00_LIB_RFKILL | |
| boolean | |
| default y if (RT2X00_LIB=y && RFKILL=y) || (RT2X00_LIB=m && RFKILL!=n) | |
| comment "rt2x00 rfkill support disabled due to modularized RFKILL and built-in rt2x00" | |
| depends on RT2X00_LIB=y && RFKILL=m | |
| config RT2X00_LIB_LEDS | |
| boolean | |
| default y if (RT2X00_LIB=y && LEDS_CLASS=y) || (RT2X00_LIB=m && LEDS_CLASS!=n) | |
| comment "rt2x00 leds support disabled due to modularized LEDS_CLASS and built-in rt2x00" | |
| depends on RT2X00_LIB=y && LEDS_CLASS=m | |
| config RT2X00_LIB_DEBUGFS | |
| bool "Ralink debugfs support" | |
| depends on RT2X00_LIB && MAC80211_DEBUGFS | |
| ---help--- | |
| Enable creation of debugfs files for the rt2x00 drivers. | |
| These debugfs files support both reading and writing of the | |
| most important register types of the rt2x00 hardware. | |
| config RT2X00_DEBUG | |
| bool "Ralink debug output" | |
| depends on RT2X00_LIB | |
| ---help--- | |
| Enable debugging output for all rt2x00 modules | |
| endif |