| /* | |
| * linux/arch/cris/kernel/process.c | |
| * | |
| * Copyright (C) 1995 Linus Torvalds | |
| * Copyright (C) 2000-2002 Axis Communications AB | |
| * | |
| * Authors: Bjorn Wesen (bjornw@axis.com) | |
| * Mikael Starvik (starvik@axis.com) | |
| * | |
| * This file handles the architecture-dependent parts of process handling.. | |
| */ | |
| #include <linux/sched.h> | |
| #include <linux/err.h> | |
| #include <linux/fs.h> | |
| #include <linux/slab.h> | |
| #include <arch/svinto.h> | |
| #include <linux/init.h> | |
| #ifdef CONFIG_ETRAX_GPIO | |
| void etrax_gpio_wake_up_check(void); /* drivers/gpio.c */ | |
| #endif | |
| /* | |
| * We use this if we don't have any better | |
| * idle routine.. | |
| */ | |
| void default_idle(void) | |
| { | |
| #ifdef CONFIG_ETRAX_GPIO | |
| etrax_gpio_wake_up_check(); | |
| #endif | |
| } | |
| /* | |
| * Free current thread data structures etc.. | |
| */ | |
| void exit_thread(void) | |
| { | |
| /* Nothing needs to be done. */ | |
| } | |
| /* if the watchdog is enabled, we can simply disable interrupts and go | |
| * into an eternal loop, and the watchdog will reset the CPU after 0.1s | |
| * if on the other hand the watchdog wasn't enabled, we just enable it and wait | |
| */ | |
| void hard_reset_now (void) | |
| { | |
| /* | |
| * Don't declare this variable elsewhere. We don't want any other | |
| * code to know about it than the watchdog handler in entry.S and | |
| * this code, implementing hard reset through the watchdog. | |
| */ | |
| #if defined(CONFIG_ETRAX_WATCHDOG) && !defined(CONFIG_SVINTO_SIM) | |
| extern int cause_of_death; | |
| #endif | |
| printk("*** HARD RESET ***\n"); | |
| local_irq_disable(); | |
| #if defined(CONFIG_ETRAX_WATCHDOG) && !defined(CONFIG_SVINTO_SIM) | |
| cause_of_death = 0xbedead; | |
| #else | |
| /* Since we dont plan to keep on resetting the watchdog, | |
| the key can be arbitrary hence three */ | |
| *R_WATCHDOG = IO_FIELD(R_WATCHDOG, key, 3) | | |
| IO_STATE(R_WATCHDOG, enable, start); | |
| #endif | |
| while(1) /* waiting for RETRIBUTION! */ ; | |
| } | |
| /* | |
| * Return saved PC of a blocked thread. | |
| */ | |
| unsigned long thread_saved_pc(struct task_struct *t) | |
| { | |
| return task_pt_regs(t)->irp; | |
| } | |
| static void kernel_thread_helper(void* dummy, int (*fn)(void *), void * arg) | |
| { | |
| fn(arg); | |
| do_exit(-1); /* Should never be called, return bad exit value */ | |
| } | |
| /* | |
| * Create a kernel thread | |
| */ | |
| int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags) | |
| { | |
| struct pt_regs regs; | |
| memset(®s, 0, sizeof(regs)); | |
| /* Don't use r10 since that is set to 0 in copy_thread */ | |
| regs.r11 = (unsigned long)fn; | |
| regs.r12 = (unsigned long)arg; | |
| regs.irp = (unsigned long)kernel_thread_helper; | |
| regs.dccr = 1 << I_DCCR_BITNR; | |
| /* Ok, create the new process.. */ | |
| return do_fork(flags | CLONE_VM | CLONE_UNTRACED, 0, ®s, 0, NULL, NULL); | |
| } | |
| /* setup the child's kernel stack with a pt_regs and switch_stack on it. | |
| * it will be un-nested during _resume and _ret_from_sys_call when the | |
| * new thread is scheduled. | |
| * | |
| * also setup the thread switching structure which is used to keep | |
| * thread-specific data during _resumes. | |
| * | |
| */ | |
| asmlinkage void ret_from_fork(void); | |
| int copy_thread(int nr, unsigned long clone_flags, unsigned long usp, | |
| unsigned long unused, | |
| struct task_struct *p, struct pt_regs *regs) | |
| { | |
| struct pt_regs * childregs; | |
| struct switch_stack *swstack; | |
| /* put the pt_regs structure at the end of the new kernel stack page and fix it up | |
| * remember that the task_struct doubles as the kernel stack for the task | |
| */ | |
| childregs = task_pt_regs(p); | |
| *childregs = *regs; /* struct copy of pt_regs */ | |
| p->set_child_tid = p->clear_child_tid = NULL; | |
| childregs->r10 = 0; /* child returns 0 after a fork/clone */ | |
| /* put the switch stack right below the pt_regs */ | |
| swstack = ((struct switch_stack *)childregs) - 1; | |
| swstack->r9 = 0; /* parameter to ret_from_sys_call, 0 == dont restart the syscall */ | |
| /* we want to return into ret_from_sys_call after the _resume */ | |
| swstack->return_ip = (unsigned long) ret_from_fork; /* Will call ret_from_sys_call */ | |
| /* fix the user-mode stackpointer */ | |
| p->thread.usp = usp; | |
| /* and the kernel-mode one */ | |
| p->thread.ksp = (unsigned long) swstack; | |
| #ifdef DEBUG | |
| printk("copy_thread: new regs at 0x%p, as shown below:\n", childregs); | |
| show_registers(childregs); | |
| #endif | |
| return 0; | |
| } | |
| /* | |
| * Be aware of the "magic" 7th argument in the four system-calls below. | |
| * They need the latest stackframe, which is put as the 7th argument by | |
| * entry.S. The previous arguments are dummies or actually used, but need | |
| * to be defined to reach the 7th argument. | |
| * | |
| * N.B.: Another method to get the stackframe is to use current_regs(). But | |
| * it returns the latest stack-frame stacked when going from _user mode_ and | |
| * some of these (at least sys_clone) are called from kernel-mode sometimes | |
| * (for example during kernel_thread, above) and thus cannot use it. Thus, | |
| * to be sure not to get any surprises, we use the method for the other calls | |
| * as well. | |
| */ | |
| asmlinkage int sys_fork(long r10, long r11, long r12, long r13, long mof, long srp, | |
| struct pt_regs *regs) | |
| { | |
| return do_fork(SIGCHLD, rdusp(), regs, 0, NULL, NULL); | |
| } | |
| /* if newusp is 0, we just grab the old usp */ | |
| /* FIXME: Is parent_tid/child_tid really third/fourth argument? Update lib? */ | |
| asmlinkage int sys_clone(unsigned long newusp, unsigned long flags, | |
| int* parent_tid, int* child_tid, long mof, long srp, | |
| struct pt_regs *regs) | |
| { | |
| if (!newusp) | |
| newusp = rdusp(); | |
| return do_fork(flags, newusp, regs, 0, parent_tid, child_tid); | |
| } | |
| /* vfork is a system call in i386 because of register-pressure - maybe | |
| * we can remove it and handle it in libc but we put it here until then. | |
| */ | |
| asmlinkage int sys_vfork(long r10, long r11, long r12, long r13, long mof, long srp, | |
| struct pt_regs *regs) | |
| { | |
| return do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD, rdusp(), regs, 0, NULL, NULL); | |
| } | |
| /* | |
| * sys_execve() executes a new program. | |
| */ | |
| asmlinkage int sys_execve(const char *fname, char **argv, char **envp, | |
| long r13, long mof, long srp, | |
| struct pt_regs *regs) | |
| { | |
| int error; | |
| char *filename; | |
| filename = getname(fname); | |
| error = PTR_ERR(filename); | |
| if (IS_ERR(filename)) | |
| goto out; | |
| error = do_execve(filename, argv, envp, regs); | |
| putname(filename); | |
| out: | |
| return error; | |
| } | |
| unsigned long get_wchan(struct task_struct *p) | |
| { | |
| #if 0 | |
| /* YURGH. TODO. */ | |
| unsigned long ebp, esp, eip; | |
| unsigned long stack_page; | |
| int count = 0; | |
| if (!p || p == current || p->state == TASK_RUNNING) | |
| return 0; | |
| stack_page = (unsigned long)p; | |
| esp = p->thread.esp; | |
| if (!stack_page || esp < stack_page || esp > 8188+stack_page) | |
| return 0; | |
| /* include/asm-i386/system.h:switch_to() pushes ebp last. */ | |
| ebp = *(unsigned long *) esp; | |
| do { | |
| if (ebp < stack_page || ebp > 8184+stack_page) | |
| return 0; | |
| eip = *(unsigned long *) (ebp+4); | |
| if (!in_sched_functions(eip)) | |
| return eip; | |
| ebp = *(unsigned long *) ebp; | |
| } while (count++ < 16); | |
| #endif | |
| return 0; | |
| } | |
| #undef last_sched | |
| #undef first_sched | |
| void show_regs(struct pt_regs * regs) | |
| { | |
| unsigned long usp = rdusp(); | |
| printk("IRP: %08lx SRP: %08lx DCCR: %08lx USP: %08lx MOF: %08lx\n", | |
| regs->irp, regs->srp, regs->dccr, usp, regs->mof ); | |
| printk(" r0: %08lx r1: %08lx r2: %08lx r3: %08lx\n", | |
| regs->r0, regs->r1, regs->r2, regs->r3); | |
| printk(" r4: %08lx r5: %08lx r6: %08lx r7: %08lx\n", | |
| regs->r4, regs->r5, regs->r6, regs->r7); | |
| printk(" r8: %08lx r9: %08lx r10: %08lx r11: %08lx\n", | |
| regs->r8, regs->r9, regs->r10, regs->r11); | |
| printk("r12: %08lx r13: %08lx oR10: %08lx\n", | |
| regs->r12, regs->r13, regs->orig_r10); | |
| } | |