| /* | |
| * linux/fs/ext4/file.c | |
| * | |
| * Copyright (C) 1992, 1993, 1994, 1995 | |
| * Remy Card (card@masi.ibp.fr) | |
| * Laboratoire MASI - Institut Blaise Pascal | |
| * Universite Pierre et Marie Curie (Paris VI) | |
| * | |
| * from | |
| * | |
| * linux/fs/minix/file.c | |
| * | |
| * Copyright (C) 1991, 1992 Linus Torvalds | |
| * | |
| * ext4 fs regular file handling primitives | |
| * | |
| * 64-bit file support on 64-bit platforms by Jakub Jelinek | |
| * (jj@sunsite.ms.mff.cuni.cz) | |
| */ | |
| #include <linux/time.h> | |
| #include <linux/fs.h> | |
| #include <linux/jbd2.h> | |
| #include <linux/mount.h> | |
| #include <linux/path.h> | |
| #include <linux/quotaops.h> | |
| #include "ext4.h" | |
| #include "ext4_jbd2.h" | |
| #include "xattr.h" | |
| #include "acl.h" | |
| /* | |
| * Called when an inode is released. Note that this is different | |
| * from ext4_file_open: open gets called at every open, but release | |
| * gets called only when /all/ the files are closed. | |
| */ | |
| static int ext4_release_file(struct inode *inode, struct file *filp) | |
| { | |
| if (ext4_test_inode_state(inode, EXT4_STATE_DA_ALLOC_CLOSE)) { | |
| ext4_alloc_da_blocks(inode); | |
| ext4_clear_inode_state(inode, EXT4_STATE_DA_ALLOC_CLOSE); | |
| } | |
| /* if we are the last writer on the inode, drop the block reservation */ | |
| if ((filp->f_mode & FMODE_WRITE) && | |
| (atomic_read(&inode->i_writecount) == 1) && | |
| !EXT4_I(inode)->i_reserved_data_blocks) | |
| { | |
| down_write(&EXT4_I(inode)->i_data_sem); | |
| ext4_discard_preallocations(inode); | |
| up_write(&EXT4_I(inode)->i_data_sem); | |
| } | |
| if (is_dx(inode) && filp->private_data) | |
| ext4_htree_free_dir_info(filp->private_data); | |
| return 0; | |
| } | |
| static void ext4_aiodio_wait(struct inode *inode) | |
| { | |
| wait_queue_head_t *wq = ext4_ioend_wq(inode); | |
| wait_event(*wq, (atomic_read(&EXT4_I(inode)->i_aiodio_unwritten) == 0)); | |
| } | |
| /* | |
| * This tests whether the IO in question is block-aligned or not. | |
| * Ext4 utilizes unwritten extents when hole-filling during direct IO, and they | |
| * are converted to written only after the IO is complete. Until they are | |
| * mapped, these blocks appear as holes, so dio_zero_block() will assume that | |
| * it needs to zero out portions of the start and/or end block. If 2 AIO | |
| * threads are at work on the same unwritten block, they must be synchronized | |
| * or one thread will zero the other's data, causing corruption. | |
| */ | |
| static int | |
| ext4_unaligned_aio(struct inode *inode, const struct iovec *iov, | |
| unsigned long nr_segs, loff_t pos) | |
| { | |
| struct super_block *sb = inode->i_sb; | |
| int blockmask = sb->s_blocksize - 1; | |
| size_t count = iov_length(iov, nr_segs); | |
| loff_t final_size = pos + count; | |
| if (pos >= inode->i_size) | |
| return 0; | |
| if ((pos & blockmask) || (final_size & blockmask)) | |
| return 1; | |
| return 0; | |
| } | |
| static ssize_t | |
| ext4_file_write(struct kiocb *iocb, const struct iovec *iov, | |
| unsigned long nr_segs, loff_t pos) | |
| { | |
| struct inode *inode = iocb->ki_filp->f_path.dentry->d_inode; | |
| int unaligned_aio = 0; | |
| int ret; | |
| /* | |
| * If we have encountered a bitmap-format file, the size limit | |
| * is smaller than s_maxbytes, which is for extent-mapped files. | |
| */ | |
| if (!(ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS))) { | |
| struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb); | |
| size_t length = iov_length(iov, nr_segs); | |
| if ((pos > sbi->s_bitmap_maxbytes || | |
| (pos == sbi->s_bitmap_maxbytes && length > 0))) | |
| return -EFBIG; | |
| if (pos + length > sbi->s_bitmap_maxbytes) { | |
| nr_segs = iov_shorten((struct iovec *)iov, nr_segs, | |
| sbi->s_bitmap_maxbytes - pos); | |
| } | |
| } else if (unlikely((iocb->ki_filp->f_flags & O_DIRECT) && | |
| !is_sync_kiocb(iocb))) { | |
| unaligned_aio = ext4_unaligned_aio(inode, iov, nr_segs, pos); | |
| } | |
| /* Unaligned direct AIO must be serialized; see comment above */ | |
| if (unaligned_aio) { | |
| static unsigned long unaligned_warn_time; | |
| /* Warn about this once per day */ | |
| if (printk_timed_ratelimit(&unaligned_warn_time, 60*60*24*HZ)) | |
| ext4_msg(inode->i_sb, KERN_WARNING, | |
| "Unaligned AIO/DIO on inode %ld by %s; " | |
| "performance will be poor.", | |
| inode->i_ino, current->comm); | |
| mutex_lock(ext4_aio_mutex(inode)); | |
| ext4_aiodio_wait(inode); | |
| } | |
| ret = generic_file_aio_write(iocb, iov, nr_segs, pos); | |
| if (unaligned_aio) | |
| mutex_unlock(ext4_aio_mutex(inode)); | |
| return ret; | |
| } | |
| static const struct vm_operations_struct ext4_file_vm_ops = { | |
| .fault = filemap_fault, | |
| .page_mkwrite = ext4_page_mkwrite, | |
| }; | |
| static int ext4_file_mmap(struct file *file, struct vm_area_struct *vma) | |
| { | |
| struct address_space *mapping = file->f_mapping; | |
| if (!mapping->a_ops->readpage) | |
| return -ENOEXEC; | |
| file_accessed(file); | |
| vma->vm_ops = &ext4_file_vm_ops; | |
| vma->vm_flags |= VM_CAN_NONLINEAR; | |
| return 0; | |
| } | |
| static int ext4_file_open(struct inode * inode, struct file * filp) | |
| { | |
| struct super_block *sb = inode->i_sb; | |
| struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb); | |
| struct ext4_inode_info *ei = EXT4_I(inode); | |
| struct vfsmount *mnt = filp->f_path.mnt; | |
| struct path path; | |
| char buf[64], *cp; | |
| if (unlikely(!(sbi->s_mount_flags & EXT4_MF_MNTDIR_SAMPLED) && | |
| !(sb->s_flags & MS_RDONLY))) { | |
| sbi->s_mount_flags |= EXT4_MF_MNTDIR_SAMPLED; | |
| /* | |
| * Sample where the filesystem has been mounted and | |
| * store it in the superblock for sysadmin convenience | |
| * when trying to sort through large numbers of block | |
| * devices or filesystem images. | |
| */ | |
| memset(buf, 0, sizeof(buf)); | |
| path.mnt = mnt; | |
| path.dentry = mnt->mnt_root; | |
| cp = d_path(&path, buf, sizeof(buf)); | |
| if (!IS_ERR(cp)) { | |
| memcpy(sbi->s_es->s_last_mounted, cp, | |
| sizeof(sbi->s_es->s_last_mounted)); | |
| ext4_mark_super_dirty(sb); | |
| } | |
| } | |
| /* | |
| * Set up the jbd2_inode if we are opening the inode for | |
| * writing and the journal is present | |
| */ | |
| if (sbi->s_journal && !ei->jinode && (filp->f_mode & FMODE_WRITE)) { | |
| struct jbd2_inode *jinode = jbd2_alloc_inode(GFP_KERNEL); | |
| spin_lock(&inode->i_lock); | |
| if (!ei->jinode) { | |
| if (!jinode) { | |
| spin_unlock(&inode->i_lock); | |
| return -ENOMEM; | |
| } | |
| ei->jinode = jinode; | |
| jbd2_journal_init_jbd_inode(ei->jinode, inode); | |
| jinode = NULL; | |
| } | |
| spin_unlock(&inode->i_lock); | |
| if (unlikely(jinode != NULL)) | |
| jbd2_free_inode(jinode); | |
| } | |
| return dquot_file_open(inode, filp); | |
| } | |
| /* | |
| * ext4_llseek() copied from generic_file_llseek() to handle both | |
| * block-mapped and extent-mapped maxbytes values. This should | |
| * otherwise be identical with generic_file_llseek(). | |
| */ | |
| loff_t ext4_llseek(struct file *file, loff_t offset, int origin) | |
| { | |
| struct inode *inode = file->f_mapping->host; | |
| loff_t maxbytes; | |
| if (!(ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS))) | |
| maxbytes = EXT4_SB(inode->i_sb)->s_bitmap_maxbytes; | |
| else | |
| maxbytes = inode->i_sb->s_maxbytes; | |
| mutex_lock(&inode->i_mutex); | |
| switch (origin) { | |
| case SEEK_END: | |
| offset += inode->i_size; | |
| break; | |
| case SEEK_CUR: | |
| if (offset == 0) { | |
| mutex_unlock(&inode->i_mutex); | |
| return file->f_pos; | |
| } | |
| offset += file->f_pos; | |
| break; | |
| case SEEK_DATA: | |
| /* | |
| * In the generic case the entire file is data, so as long as | |
| * offset isn't at the end of the file then the offset is data. | |
| */ | |
| if (offset >= inode->i_size) { | |
| mutex_unlock(&inode->i_mutex); | |
| return -ENXIO; | |
| } | |
| break; | |
| case SEEK_HOLE: | |
| /* | |
| * There is a virtual hole at the end of the file, so as long as | |
| * offset isn't i_size or larger, return i_size. | |
| */ | |
| if (offset >= inode->i_size) { | |
| mutex_unlock(&inode->i_mutex); | |
| return -ENXIO; | |
| } | |
| offset = inode->i_size; | |
| break; | |
| } | |
| if (offset < 0 || offset > maxbytes) { | |
| mutex_unlock(&inode->i_mutex); | |
| return -EINVAL; | |
| } | |
| if (offset != file->f_pos) { | |
| file->f_pos = offset; | |
| file->f_version = 0; | |
| } | |
| mutex_unlock(&inode->i_mutex); | |
| return offset; | |
| } | |
| const struct file_operations ext4_file_operations = { | |
| .llseek = ext4_llseek, | |
| .read = do_sync_read, | |
| .write = do_sync_write, | |
| .aio_read = generic_file_aio_read, | |
| .aio_write = ext4_file_write, | |
| .unlocked_ioctl = ext4_ioctl, | |
| #ifdef CONFIG_COMPAT | |
| .compat_ioctl = ext4_compat_ioctl, | |
| #endif | |
| .mmap = ext4_file_mmap, | |
| .open = ext4_file_open, | |
| .release = ext4_release_file, | |
| .fsync = ext4_sync_file, | |
| .splice_read = generic_file_splice_read, | |
| .splice_write = generic_file_splice_write, | |
| .fallocate = ext4_fallocate, | |
| }; | |
| const struct inode_operations ext4_file_inode_operations = { | |
| .setattr = ext4_setattr, | |
| .getattr = ext4_getattr, | |
| #ifdef CONFIG_EXT4_FS_XATTR | |
| .setxattr = generic_setxattr, | |
| .getxattr = generic_getxattr, | |
| .listxattr = ext4_listxattr, | |
| .removexattr = generic_removexattr, | |
| #endif | |
| .get_acl = ext4_get_acl, | |
| .fiemap = ext4_fiemap, | |
| }; | |