| /* | |
| * Intel SMP support routines. | |
| * | |
| * (c) 1995 Alan Cox, Building #3 <alan@lxorguk.ukuu.org.uk> | |
| * (c) 1998-99, 2000, 2009 Ingo Molnar <mingo@redhat.com> | |
| * (c) 2002,2003 Andi Kleen, SuSE Labs. | |
| * | |
| * i386 and x86_64 integration by Glauber Costa <gcosta@redhat.com> | |
| * | |
| * This code is released under the GNU General Public License version 2 or | |
| * later. | |
| */ | |
| #include <linux/init.h> | |
| #include <linux/mm.h> | |
| #include <linux/delay.h> | |
| #include <linux/spinlock.h> | |
| #include <linux/kernel_stat.h> | |
| #include <linux/mc146818rtc.h> | |
| #include <linux/cache.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/cpu.h> | |
| #include <linux/gfp.h> | |
| #include <asm/mtrr.h> | |
| #include <asm/tlbflush.h> | |
| #include <asm/mmu_context.h> | |
| #include <asm/proto.h> | |
| #include <asm/apic.h> | |
| /* | |
| * Some notes on x86 processor bugs affecting SMP operation: | |
| * | |
| * Pentium, Pentium Pro, II, III (and all CPUs) have bugs. | |
| * The Linux implications for SMP are handled as follows: | |
| * | |
| * Pentium III / [Xeon] | |
| * None of the E1AP-E3AP errata are visible to the user. | |
| * | |
| * E1AP. see PII A1AP | |
| * E2AP. see PII A2AP | |
| * E3AP. see PII A3AP | |
| * | |
| * Pentium II / [Xeon] | |
| * None of the A1AP-A3AP errata are visible to the user. | |
| * | |
| * A1AP. see PPro 1AP | |
| * A2AP. see PPro 2AP | |
| * A3AP. see PPro 7AP | |
| * | |
| * Pentium Pro | |
| * None of 1AP-9AP errata are visible to the normal user, | |
| * except occasional delivery of 'spurious interrupt' as trap #15. | |
| * This is very rare and a non-problem. | |
| * | |
| * 1AP. Linux maps APIC as non-cacheable | |
| * 2AP. worked around in hardware | |
| * 3AP. fixed in C0 and above steppings microcode update. | |
| * Linux does not use excessive STARTUP_IPIs. | |
| * 4AP. worked around in hardware | |
| * 5AP. symmetric IO mode (normal Linux operation) not affected. | |
| * 'noapic' mode has vector 0xf filled out properly. | |
| * 6AP. 'noapic' mode might be affected - fixed in later steppings | |
| * 7AP. We do not assume writes to the LVT deassering IRQs | |
| * 8AP. We do not enable low power mode (deep sleep) during MP bootup | |
| * 9AP. We do not use mixed mode | |
| * | |
| * Pentium | |
| * There is a marginal case where REP MOVS on 100MHz SMP | |
| * machines with B stepping processors can fail. XXX should provide | |
| * an L1cache=Writethrough or L1cache=off option. | |
| * | |
| * B stepping CPUs may hang. There are hardware work arounds | |
| * for this. We warn about it in case your board doesn't have the work | |
| * arounds. Basically that's so I can tell anyone with a B stepping | |
| * CPU and SMP problems "tough". | |
| * | |
| * Specific items [From Pentium Processor Specification Update] | |
| * | |
| * 1AP. Linux doesn't use remote read | |
| * 2AP. Linux doesn't trust APIC errors | |
| * 3AP. We work around this | |
| * 4AP. Linux never generated 3 interrupts of the same priority | |
| * to cause a lost local interrupt. | |
| * 5AP. Remote read is never used | |
| * 6AP. not affected - worked around in hardware | |
| * 7AP. not affected - worked around in hardware | |
| * 8AP. worked around in hardware - we get explicit CS errors if not | |
| * 9AP. only 'noapic' mode affected. Might generate spurious | |
| * interrupts, we log only the first one and count the | |
| * rest silently. | |
| * 10AP. not affected - worked around in hardware | |
| * 11AP. Linux reads the APIC between writes to avoid this, as per | |
| * the documentation. Make sure you preserve this as it affects | |
| * the C stepping chips too. | |
| * 12AP. not affected - worked around in hardware | |
| * 13AP. not affected - worked around in hardware | |
| * 14AP. we always deassert INIT during bootup | |
| * 15AP. not affected - worked around in hardware | |
| * 16AP. not affected - worked around in hardware | |
| * 17AP. not affected - worked around in hardware | |
| * 18AP. not affected - worked around in hardware | |
| * 19AP. not affected - worked around in BIOS | |
| * | |
| * If this sounds worrying believe me these bugs are either ___RARE___, | |
| * or are signal timing bugs worked around in hardware and there's | |
| * about nothing of note with C stepping upwards. | |
| */ | |
| /* | |
| * this function sends a 'reschedule' IPI to another CPU. | |
| * it goes straight through and wastes no time serializing | |
| * anything. Worst case is that we lose a reschedule ... | |
| */ | |
| static void native_smp_send_reschedule(int cpu) | |
| { | |
| if (unlikely(cpu_is_offline(cpu))) { | |
| WARN_ON(1); | |
| return; | |
| } | |
| apic->send_IPI_mask(cpumask_of(cpu), RESCHEDULE_VECTOR); | |
| } | |
| void native_send_call_func_single_ipi(int cpu) | |
| { | |
| apic->send_IPI_mask(cpumask_of(cpu), CALL_FUNCTION_SINGLE_VECTOR); | |
| } | |
| void native_send_call_func_ipi(const struct cpumask *mask) | |
| { | |
| cpumask_var_t allbutself; | |
| if (!alloc_cpumask_var(&allbutself, GFP_ATOMIC)) { | |
| apic->send_IPI_mask(mask, CALL_FUNCTION_VECTOR); | |
| return; | |
| } | |
| cpumask_copy(allbutself, cpu_online_mask); | |
| cpumask_clear_cpu(smp_processor_id(), allbutself); | |
| if (cpumask_equal(mask, allbutself) && | |
| cpumask_equal(cpu_online_mask, cpu_callout_mask)) | |
| apic->send_IPI_allbutself(CALL_FUNCTION_VECTOR); | |
| else | |
| apic->send_IPI_mask(mask, CALL_FUNCTION_VECTOR); | |
| free_cpumask_var(allbutself); | |
| } | |
| /* | |
| * this function calls the 'stop' function on all other CPUs in the system. | |
| */ | |
| asmlinkage void smp_reboot_interrupt(void) | |
| { | |
| ack_APIC_irq(); | |
| irq_enter(); | |
| stop_this_cpu(NULL); | |
| irq_exit(); | |
| } | |
| static void native_stop_other_cpus(int wait) | |
| { | |
| unsigned long flags; | |
| unsigned long timeout; | |
| if (reboot_force) | |
| return; | |
| /* | |
| * Use an own vector here because smp_call_function | |
| * does lots of things not suitable in a panic situation. | |
| * On most systems we could also use an NMI here, | |
| * but there are a few systems around where NMI | |
| * is problematic so stay with an non NMI for now | |
| * (this implies we cannot stop CPUs spinning with irq off | |
| * currently) | |
| */ | |
| if (num_online_cpus() > 1) { | |
| apic->send_IPI_allbutself(REBOOT_VECTOR); | |
| /* | |
| * Don't wait longer than a second if the caller | |
| * didn't ask us to wait. | |
| */ | |
| timeout = USEC_PER_SEC; | |
| while (num_online_cpus() > 1 && (wait || timeout--)) | |
| udelay(1); | |
| } | |
| local_irq_save(flags); | |
| disable_local_APIC(); | |
| local_irq_restore(flags); | |
| } | |
| /* | |
| * Reschedule call back. | |
| */ | |
| void smp_reschedule_interrupt(struct pt_regs *regs) | |
| { | |
| ack_APIC_irq(); | |
| inc_irq_stat(irq_resched_count); | |
| scheduler_ipi(); | |
| /* | |
| * KVM uses this interrupt to force a cpu out of guest mode | |
| */ | |
| } | |
| void smp_call_function_interrupt(struct pt_regs *regs) | |
| { | |
| ack_APIC_irq(); | |
| irq_enter(); | |
| generic_smp_call_function_interrupt(); | |
| inc_irq_stat(irq_call_count); | |
| irq_exit(); | |
| } | |
| void smp_call_function_single_interrupt(struct pt_regs *regs) | |
| { | |
| ack_APIC_irq(); | |
| irq_enter(); | |
| generic_smp_call_function_single_interrupt(); | |
| inc_irq_stat(irq_call_count); | |
| irq_exit(); | |
| } | |
| struct smp_ops smp_ops = { | |
| .smp_prepare_boot_cpu = native_smp_prepare_boot_cpu, | |
| .smp_prepare_cpus = native_smp_prepare_cpus, | |
| .smp_cpus_done = native_smp_cpus_done, | |
| .stop_other_cpus = native_stop_other_cpus, | |
| .smp_send_reschedule = native_smp_send_reschedule, | |
| .cpu_up = native_cpu_up, | |
| .cpu_die = native_cpu_die, | |
| .cpu_disable = native_cpu_disable, | |
| .play_dead = native_play_dead, | |
| .send_call_func_ipi = native_send_call_func_ipi, | |
| .send_call_func_single_ipi = native_send_call_func_single_ipi, | |
| }; | |
| EXPORT_SYMBOL_GPL(smp_ops); |