| #include <linux/bootmem.h> | |
| #include <linux/linkage.h> | |
| #include <linux/bitops.h> | |
| #include <linux/kernel.h> | |
| #include <linux/module.h> | |
| #include <linux/percpu.h> | |
| #include <linux/string.h> | |
| #include <linux/delay.h> | |
| #include <linux/sched.h> | |
| #include <linux/init.h> | |
| #include <linux/kgdb.h> | |
| #include <linux/smp.h> | |
| #include <linux/io.h> | |
| #include <asm/stackprotector.h> | |
| #include <asm/perf_event.h> | |
| #include <asm/mmu_context.h> | |
| #include <asm/hypervisor.h> | |
| #include <asm/processor.h> | |
| #include <asm/sections.h> | |
| #include <linux/topology.h> | |
| #include <linux/cpumask.h> | |
| #include <asm/pgtable.h> | |
| #include <linux/atomic.h> | |
| #include <asm/proto.h> | |
| #include <asm/setup.h> | |
| #include <asm/apic.h> | |
| #include <asm/desc.h> | |
| #include <asm/i387.h> | |
| #include <asm/mtrr.h> | |
| #include <linux/numa.h> | |
| #include <asm/asm.h> | |
| #include <asm/cpu.h> | |
| #include <asm/mce.h> | |
| #include <asm/msr.h> | |
| #include <asm/pat.h> | |
| #ifdef CONFIG_X86_LOCAL_APIC | |
| #include <asm/uv/uv.h> | |
| #endif | |
| #include "cpu.h" | |
| /* all of these masks are initialized in setup_cpu_local_masks() */ | |
| cpumask_var_t cpu_initialized_mask; | |
| cpumask_var_t cpu_callout_mask; | |
| cpumask_var_t cpu_callin_mask; | |
| /* representing cpus for which sibling maps can be computed */ | |
| cpumask_var_t cpu_sibling_setup_mask; | |
| /* correctly size the local cpu masks */ | |
| void __init setup_cpu_local_masks(void) | |
| { | |
| alloc_bootmem_cpumask_var(&cpu_initialized_mask); | |
| alloc_bootmem_cpumask_var(&cpu_callin_mask); | |
| alloc_bootmem_cpumask_var(&cpu_callout_mask); | |
| alloc_bootmem_cpumask_var(&cpu_sibling_setup_mask); | |
| } | |
| static void __cpuinit default_init(struct cpuinfo_x86 *c) | |
| { | |
| #ifdef CONFIG_X86_64 | |
| cpu_detect_cache_sizes(c); | |
| #else | |
| /* Not much we can do here... */ | |
| /* Check if at least it has cpuid */ | |
| if (c->cpuid_level == -1) { | |
| /* No cpuid. It must be an ancient CPU */ | |
| if (c->x86 == 4) | |
| strcpy(c->x86_model_id, "486"); | |
| else if (c->x86 == 3) | |
| strcpy(c->x86_model_id, "386"); | |
| } | |
| #endif | |
| } | |
| static const struct cpu_dev __cpuinitconst default_cpu = { | |
| .c_init = default_init, | |
| .c_vendor = "Unknown", | |
| .c_x86_vendor = X86_VENDOR_UNKNOWN, | |
| }; | |
| static const struct cpu_dev *this_cpu __cpuinitdata = &default_cpu; | |
| DEFINE_PER_CPU_PAGE_ALIGNED(struct gdt_page, gdt_page) = { .gdt = { | |
| #ifdef CONFIG_X86_64 | |
| /* | |
| * We need valid kernel segments for data and code in long mode too | |
| * IRET will check the segment types kkeil 2000/10/28 | |
| * Also sysret mandates a special GDT layout | |
| * | |
| * TLS descriptors are currently at a different place compared to i386. | |
| * Hopefully nobody expects them at a fixed place (Wine?) | |
| */ | |
| [GDT_ENTRY_KERNEL32_CS] = GDT_ENTRY_INIT(0xc09b, 0, 0xfffff), | |
| [GDT_ENTRY_KERNEL_CS] = GDT_ENTRY_INIT(0xa09b, 0, 0xfffff), | |
| [GDT_ENTRY_KERNEL_DS] = GDT_ENTRY_INIT(0xc093, 0, 0xfffff), | |
| [GDT_ENTRY_DEFAULT_USER32_CS] = GDT_ENTRY_INIT(0xc0fb, 0, 0xfffff), | |
| [GDT_ENTRY_DEFAULT_USER_DS] = GDT_ENTRY_INIT(0xc0f3, 0, 0xfffff), | |
| [GDT_ENTRY_DEFAULT_USER_CS] = GDT_ENTRY_INIT(0xa0fb, 0, 0xfffff), | |
| #else | |
| [GDT_ENTRY_KERNEL_CS] = GDT_ENTRY_INIT(0xc09a, 0, 0xfffff), | |
| [GDT_ENTRY_KERNEL_DS] = GDT_ENTRY_INIT(0xc092, 0, 0xfffff), | |
| [GDT_ENTRY_DEFAULT_USER_CS] = GDT_ENTRY_INIT(0xc0fa, 0, 0xfffff), | |
| [GDT_ENTRY_DEFAULT_USER_DS] = GDT_ENTRY_INIT(0xc0f2, 0, 0xfffff), | |
| /* | |
| * Segments used for calling PnP BIOS have byte granularity. | |
| * They code segments and data segments have fixed 64k limits, | |
| * the transfer segment sizes are set at run time. | |
| */ | |
| /* 32-bit code */ | |
| [GDT_ENTRY_PNPBIOS_CS32] = GDT_ENTRY_INIT(0x409a, 0, 0xffff), | |
| /* 16-bit code */ | |
| [GDT_ENTRY_PNPBIOS_CS16] = GDT_ENTRY_INIT(0x009a, 0, 0xffff), | |
| /* 16-bit data */ | |
| [GDT_ENTRY_PNPBIOS_DS] = GDT_ENTRY_INIT(0x0092, 0, 0xffff), | |
| /* 16-bit data */ | |
| [GDT_ENTRY_PNPBIOS_TS1] = GDT_ENTRY_INIT(0x0092, 0, 0), | |
| /* 16-bit data */ | |
| [GDT_ENTRY_PNPBIOS_TS2] = GDT_ENTRY_INIT(0x0092, 0, 0), | |
| /* | |
| * The APM segments have byte granularity and their bases | |
| * are set at run time. All have 64k limits. | |
| */ | |
| /* 32-bit code */ | |
| [GDT_ENTRY_APMBIOS_BASE] = GDT_ENTRY_INIT(0x409a, 0, 0xffff), | |
| /* 16-bit code */ | |
| [GDT_ENTRY_APMBIOS_BASE+1] = GDT_ENTRY_INIT(0x009a, 0, 0xffff), | |
| /* data */ | |
| [GDT_ENTRY_APMBIOS_BASE+2] = GDT_ENTRY_INIT(0x4092, 0, 0xffff), | |
| [GDT_ENTRY_ESPFIX_SS] = GDT_ENTRY_INIT(0xc092, 0, 0xfffff), | |
| [GDT_ENTRY_PERCPU] = GDT_ENTRY_INIT(0xc092, 0, 0xfffff), | |
| GDT_STACK_CANARY_INIT | |
| #endif | |
| } }; | |
| EXPORT_PER_CPU_SYMBOL_GPL(gdt_page); | |
| static int __init x86_xsave_setup(char *s) | |
| { | |
| setup_clear_cpu_cap(X86_FEATURE_XSAVE); | |
| setup_clear_cpu_cap(X86_FEATURE_XSAVEOPT); | |
| return 1; | |
| } | |
| __setup("noxsave", x86_xsave_setup); | |
| static int __init x86_xsaveopt_setup(char *s) | |
| { | |
| setup_clear_cpu_cap(X86_FEATURE_XSAVEOPT); | |
| return 1; | |
| } | |
| __setup("noxsaveopt", x86_xsaveopt_setup); | |
| #ifdef CONFIG_X86_32 | |
| static int cachesize_override __cpuinitdata = -1; | |
| static int disable_x86_serial_nr __cpuinitdata = 1; | |
| static int __init cachesize_setup(char *str) | |
| { | |
| get_option(&str, &cachesize_override); | |
| return 1; | |
| } | |
| __setup("cachesize=", cachesize_setup); | |
| static int __init x86_fxsr_setup(char *s) | |
| { | |
| setup_clear_cpu_cap(X86_FEATURE_FXSR); | |
| setup_clear_cpu_cap(X86_FEATURE_XMM); | |
| return 1; | |
| } | |
| __setup("nofxsr", x86_fxsr_setup); | |
| static int __init x86_sep_setup(char *s) | |
| { | |
| setup_clear_cpu_cap(X86_FEATURE_SEP); | |
| return 1; | |
| } | |
| __setup("nosep", x86_sep_setup); | |
| /* Standard macro to see if a specific flag is changeable */ | |
| static inline int flag_is_changeable_p(u32 flag) | |
| { | |
| u32 f1, f2; | |
| /* | |
| * Cyrix and IDT cpus allow disabling of CPUID | |
| * so the code below may return different results | |
| * when it is executed before and after enabling | |
| * the CPUID. Add "volatile" to not allow gcc to | |
| * optimize the subsequent calls to this function. | |
| */ | |
| asm volatile ("pushfl \n\t" | |
| "pushfl \n\t" | |
| "popl %0 \n\t" | |
| "movl %0, %1 \n\t" | |
| "xorl %2, %0 \n\t" | |
| "pushl %0 \n\t" | |
| "popfl \n\t" | |
| "pushfl \n\t" | |
| "popl %0 \n\t" | |
| "popfl \n\t" | |
| : "=&r" (f1), "=&r" (f2) | |
| : "ir" (flag)); | |
| return ((f1^f2) & flag) != 0; | |
| } | |
| /* Probe for the CPUID instruction */ | |
| static int __cpuinit have_cpuid_p(void) | |
| { | |
| return flag_is_changeable_p(X86_EFLAGS_ID); | |
| } | |
| static void __cpuinit squash_the_stupid_serial_number(struct cpuinfo_x86 *c) | |
| { | |
| unsigned long lo, hi; | |
| if (!cpu_has(c, X86_FEATURE_PN) || !disable_x86_serial_nr) | |
| return; | |
| /* Disable processor serial number: */ | |
| rdmsr(MSR_IA32_BBL_CR_CTL, lo, hi); | |
| lo |= 0x200000; | |
| wrmsr(MSR_IA32_BBL_CR_CTL, lo, hi); | |
| printk(KERN_NOTICE "CPU serial number disabled.\n"); | |
| clear_cpu_cap(c, X86_FEATURE_PN); | |
| /* Disabling the serial number may affect the cpuid level */ | |
| c->cpuid_level = cpuid_eax(0); | |
| } | |
| static int __init x86_serial_nr_setup(char *s) | |
| { | |
| disable_x86_serial_nr = 0; | |
| return 1; | |
| } | |
| __setup("serialnumber", x86_serial_nr_setup); | |
| #else | |
| static inline int flag_is_changeable_p(u32 flag) | |
| { | |
| return 1; | |
| } | |
| /* Probe for the CPUID instruction */ | |
| static inline int have_cpuid_p(void) | |
| { | |
| return 1; | |
| } | |
| static inline void squash_the_stupid_serial_number(struct cpuinfo_x86 *c) | |
| { | |
| } | |
| #endif | |
| static int disable_smep __cpuinitdata; | |
| static __init int setup_disable_smep(char *arg) | |
| { | |
| disable_smep = 1; | |
| return 1; | |
| } | |
| __setup("nosmep", setup_disable_smep); | |
| static __cpuinit void setup_smep(struct cpuinfo_x86 *c) | |
| { | |
| if (cpu_has(c, X86_FEATURE_SMEP)) { | |
| if (unlikely(disable_smep)) { | |
| setup_clear_cpu_cap(X86_FEATURE_SMEP); | |
| clear_in_cr4(X86_CR4_SMEP); | |
| } else | |
| set_in_cr4(X86_CR4_SMEP); | |
| } | |
| } | |
| /* | |
| * Some CPU features depend on higher CPUID levels, which may not always | |
| * be available due to CPUID level capping or broken virtualization | |
| * software. Add those features to this table to auto-disable them. | |
| */ | |
| struct cpuid_dependent_feature { | |
| u32 feature; | |
| u32 level; | |
| }; | |
| static const struct cpuid_dependent_feature __cpuinitconst | |
| cpuid_dependent_features[] = { | |
| { X86_FEATURE_MWAIT, 0x00000005 }, | |
| { X86_FEATURE_DCA, 0x00000009 }, | |
| { X86_FEATURE_XSAVE, 0x0000000d }, | |
| { 0, 0 } | |
| }; | |
| static void __cpuinit filter_cpuid_features(struct cpuinfo_x86 *c, bool warn) | |
| { | |
| const struct cpuid_dependent_feature *df; | |
| for (df = cpuid_dependent_features; df->feature; df++) { | |
| if (!cpu_has(c, df->feature)) | |
| continue; | |
| /* | |
| * Note: cpuid_level is set to -1 if unavailable, but | |
| * extended_extended_level is set to 0 if unavailable | |
| * and the legitimate extended levels are all negative | |
| * when signed; hence the weird messing around with | |
| * signs here... | |
| */ | |
| if (!((s32)df->level < 0 ? | |
| (u32)df->level > (u32)c->extended_cpuid_level : | |
| (s32)df->level > (s32)c->cpuid_level)) | |
| continue; | |
| clear_cpu_cap(c, df->feature); | |
| if (!warn) | |
| continue; | |
| printk(KERN_WARNING | |
| "CPU: CPU feature %s disabled, no CPUID level 0x%x\n", | |
| x86_cap_flags[df->feature], df->level); | |
| } | |
| } | |
| /* | |
| * Naming convention should be: <Name> [(<Codename>)] | |
| * This table only is used unless init_<vendor>() below doesn't set it; | |
| * in particular, if CPUID levels 0x80000002..4 are supported, this | |
| * isn't used | |
| */ | |
| /* Look up CPU names by table lookup. */ | |
| static const char *__cpuinit table_lookup_model(struct cpuinfo_x86 *c) | |
| { | |
| const struct cpu_model_info *info; | |
| if (c->x86_model >= 16) | |
| return NULL; /* Range check */ | |
| if (!this_cpu) | |
| return NULL; | |
| info = this_cpu->c_models; | |
| while (info && info->family) { | |
| if (info->family == c->x86) | |
| return info->model_names[c->x86_model]; | |
| info++; | |
| } | |
| return NULL; /* Not found */ | |
| } | |
| __u32 cpu_caps_cleared[NCAPINTS] __cpuinitdata; | |
| __u32 cpu_caps_set[NCAPINTS] __cpuinitdata; | |
| void load_percpu_segment(int cpu) | |
| { | |
| #ifdef CONFIG_X86_32 | |
| loadsegment(fs, __KERNEL_PERCPU); | |
| #else | |
| loadsegment(gs, 0); | |
| wrmsrl(MSR_GS_BASE, (unsigned long)per_cpu(irq_stack_union.gs_base, cpu)); | |
| #endif | |
| load_stack_canary_segment(); | |
| } | |
| /* | |
| * Current gdt points %fs at the "master" per-cpu area: after this, | |
| * it's on the real one. | |
| */ | |
| void switch_to_new_gdt(int cpu) | |
| { | |
| struct desc_ptr gdt_descr; | |
| gdt_descr.address = (long)get_cpu_gdt_table(cpu); | |
| gdt_descr.size = GDT_SIZE - 1; | |
| load_gdt(&gdt_descr); | |
| /* Reload the per-cpu base */ | |
| load_percpu_segment(cpu); | |
| } | |
| static const struct cpu_dev *__cpuinitdata cpu_devs[X86_VENDOR_NUM] = {}; | |
| static void __cpuinit get_model_name(struct cpuinfo_x86 *c) | |
| { | |
| unsigned int *v; | |
| char *p, *q; | |
| if (c->extended_cpuid_level < 0x80000004) | |
| return; | |
| v = (unsigned int *)c->x86_model_id; | |
| cpuid(0x80000002, &v[0], &v[1], &v[2], &v[3]); | |
| cpuid(0x80000003, &v[4], &v[5], &v[6], &v[7]); | |
| cpuid(0x80000004, &v[8], &v[9], &v[10], &v[11]); | |
| c->x86_model_id[48] = 0; | |
| /* | |
| * Intel chips right-justify this string for some dumb reason; | |
| * undo that brain damage: | |
| */ | |
| p = q = &c->x86_model_id[0]; | |
| while (*p == ' ') | |
| p++; | |
| if (p != q) { | |
| while (*p) | |
| *q++ = *p++; | |
| while (q <= &c->x86_model_id[48]) | |
| *q++ = '\0'; /* Zero-pad the rest */ | |
| } | |
| } | |
| void __cpuinit cpu_detect_cache_sizes(struct cpuinfo_x86 *c) | |
| { | |
| unsigned int n, dummy, ebx, ecx, edx, l2size; | |
| n = c->extended_cpuid_level; | |
| if (n >= 0x80000005) { | |
| cpuid(0x80000005, &dummy, &ebx, &ecx, &edx); | |
| c->x86_cache_size = (ecx>>24) + (edx>>24); | |
| #ifdef CONFIG_X86_64 | |
| /* On K8 L1 TLB is inclusive, so don't count it */ | |
| c->x86_tlbsize = 0; | |
| #endif | |
| } | |
| if (n < 0x80000006) /* Some chips just has a large L1. */ | |
| return; | |
| cpuid(0x80000006, &dummy, &ebx, &ecx, &edx); | |
| l2size = ecx >> 16; | |
| #ifdef CONFIG_X86_64 | |
| c->x86_tlbsize += ((ebx >> 16) & 0xfff) + (ebx & 0xfff); | |
| #else | |
| /* do processor-specific cache resizing */ | |
| if (this_cpu->c_size_cache) | |
| l2size = this_cpu->c_size_cache(c, l2size); | |
| /* Allow user to override all this if necessary. */ | |
| if (cachesize_override != -1) | |
| l2size = cachesize_override; | |
| if (l2size == 0) | |
| return; /* Again, no L2 cache is possible */ | |
| #endif | |
| c->x86_cache_size = l2size; | |
| } | |
| void __cpuinit detect_ht(struct cpuinfo_x86 *c) | |
| { | |
| #ifdef CONFIG_X86_HT | |
| u32 eax, ebx, ecx, edx; | |
| int index_msb, core_bits; | |
| static bool printed; | |
| if (!cpu_has(c, X86_FEATURE_HT)) | |
| return; | |
| if (cpu_has(c, X86_FEATURE_CMP_LEGACY)) | |
| goto out; | |
| if (cpu_has(c, X86_FEATURE_XTOPOLOGY)) | |
| return; | |
| cpuid(1, &eax, &ebx, &ecx, &edx); | |
| smp_num_siblings = (ebx & 0xff0000) >> 16; | |
| if (smp_num_siblings == 1) { | |
| printk_once(KERN_INFO "CPU0: Hyper-Threading is disabled\n"); | |
| goto out; | |
| } | |
| if (smp_num_siblings <= 1) | |
| goto out; | |
| index_msb = get_count_order(smp_num_siblings); | |
| c->phys_proc_id = apic->phys_pkg_id(c->initial_apicid, index_msb); | |
| smp_num_siblings = smp_num_siblings / c->x86_max_cores; | |
| index_msb = get_count_order(smp_num_siblings); | |
| core_bits = get_count_order(c->x86_max_cores); | |
| c->cpu_core_id = apic->phys_pkg_id(c->initial_apicid, index_msb) & | |
| ((1 << core_bits) - 1); | |
| out: | |
| if (!printed && (c->x86_max_cores * smp_num_siblings) > 1) { | |
| printk(KERN_INFO "CPU: Physical Processor ID: %d\n", | |
| c->phys_proc_id); | |
| printk(KERN_INFO "CPU: Processor Core ID: %d\n", | |
| c->cpu_core_id); | |
| printed = 1; | |
| } | |
| #endif | |
| } | |
| static void __cpuinit get_cpu_vendor(struct cpuinfo_x86 *c) | |
| { | |
| char *v = c->x86_vendor_id; | |
| int i; | |
| for (i = 0; i < X86_VENDOR_NUM; i++) { | |
| if (!cpu_devs[i]) | |
| break; | |
| if (!strcmp(v, cpu_devs[i]->c_ident[0]) || | |
| (cpu_devs[i]->c_ident[1] && | |
| !strcmp(v, cpu_devs[i]->c_ident[1]))) { | |
| this_cpu = cpu_devs[i]; | |
| c->x86_vendor = this_cpu->c_x86_vendor; | |
| return; | |
| } | |
| } | |
| printk_once(KERN_ERR | |
| "CPU: vendor_id '%s' unknown, using generic init.\n" \ | |
| "CPU: Your system may be unstable.\n", v); | |
| c->x86_vendor = X86_VENDOR_UNKNOWN; | |
| this_cpu = &default_cpu; | |
| } | |
| void __cpuinit cpu_detect(struct cpuinfo_x86 *c) | |
| { | |
| /* Get vendor name */ | |
| cpuid(0x00000000, (unsigned int *)&c->cpuid_level, | |
| (unsigned int *)&c->x86_vendor_id[0], | |
| (unsigned int *)&c->x86_vendor_id[8], | |
| (unsigned int *)&c->x86_vendor_id[4]); | |
| c->x86 = 4; | |
| /* Intel-defined flags: level 0x00000001 */ | |
| if (c->cpuid_level >= 0x00000001) { | |
| u32 junk, tfms, cap0, misc; | |
| cpuid(0x00000001, &tfms, &misc, &junk, &cap0); | |
| c->x86 = (tfms >> 8) & 0xf; | |
| c->x86_model = (tfms >> 4) & 0xf; | |
| c->x86_mask = tfms & 0xf; | |
| if (c->x86 == 0xf) | |
| c->x86 += (tfms >> 20) & 0xff; | |
| if (c->x86 >= 0x6) | |
| c->x86_model += ((tfms >> 16) & 0xf) << 4; | |
| if (cap0 & (1<<19)) { | |
| c->x86_clflush_size = ((misc >> 8) & 0xff) * 8; | |
| c->x86_cache_alignment = c->x86_clflush_size; | |
| } | |
| } | |
| } | |
| void __cpuinit get_cpu_cap(struct cpuinfo_x86 *c) | |
| { | |
| u32 tfms, xlvl; | |
| u32 ebx; | |
| /* Intel-defined flags: level 0x00000001 */ | |
| if (c->cpuid_level >= 0x00000001) { | |
| u32 capability, excap; | |
| cpuid(0x00000001, &tfms, &ebx, &excap, &capability); | |
| c->x86_capability[0] = capability; | |
| c->x86_capability[4] = excap; | |
| } | |
| /* Additional Intel-defined flags: level 0x00000007 */ | |
| if (c->cpuid_level >= 0x00000007) { | |
| u32 eax, ebx, ecx, edx; | |
| cpuid_count(0x00000007, 0, &eax, &ebx, &ecx, &edx); | |
| c->x86_capability[9] = ebx; | |
| } | |
| /* AMD-defined flags: level 0x80000001 */ | |
| xlvl = cpuid_eax(0x80000000); | |
| c->extended_cpuid_level = xlvl; | |
| if ((xlvl & 0xffff0000) == 0x80000000) { | |
| if (xlvl >= 0x80000001) { | |
| c->x86_capability[1] = cpuid_edx(0x80000001); | |
| c->x86_capability[6] = cpuid_ecx(0x80000001); | |
| } | |
| } | |
| if (c->extended_cpuid_level >= 0x80000008) { | |
| u32 eax = cpuid_eax(0x80000008); | |
| c->x86_virt_bits = (eax >> 8) & 0xff; | |
| c->x86_phys_bits = eax & 0xff; | |
| } | |
| #ifdef CONFIG_X86_32 | |
| else if (cpu_has(c, X86_FEATURE_PAE) || cpu_has(c, X86_FEATURE_PSE36)) | |
| c->x86_phys_bits = 36; | |
| #endif | |
| if (c->extended_cpuid_level >= 0x80000007) | |
| c->x86_power = cpuid_edx(0x80000007); | |
| init_scattered_cpuid_features(c); | |
| } | |
| static void __cpuinit identify_cpu_without_cpuid(struct cpuinfo_x86 *c) | |
| { | |
| #ifdef CONFIG_X86_32 | |
| int i; | |
| /* | |
| * First of all, decide if this is a 486 or higher | |
| * It's a 486 if we can modify the AC flag | |
| */ | |
| if (flag_is_changeable_p(X86_EFLAGS_AC)) | |
| c->x86 = 4; | |
| else | |
| c->x86 = 3; | |
| for (i = 0; i < X86_VENDOR_NUM; i++) | |
| if (cpu_devs[i] && cpu_devs[i]->c_identify) { | |
| c->x86_vendor_id[0] = 0; | |
| cpu_devs[i]->c_identify(c); | |
| if (c->x86_vendor_id[0]) { | |
| get_cpu_vendor(c); | |
| break; | |
| } | |
| } | |
| #endif | |
| } | |
| /* | |
| * Do minimum CPU detection early. | |
| * Fields really needed: vendor, cpuid_level, family, model, mask, | |
| * cache alignment. | |
| * The others are not touched to avoid unwanted side effects. | |
| * | |
| * WARNING: this function is only called on the BP. Don't add code here | |
| * that is supposed to run on all CPUs. | |
| */ | |
| static void __init early_identify_cpu(struct cpuinfo_x86 *c) | |
| { | |
| #ifdef CONFIG_X86_64 | |
| c->x86_clflush_size = 64; | |
| c->x86_phys_bits = 36; | |
| c->x86_virt_bits = 48; | |
| #else | |
| c->x86_clflush_size = 32; | |
| c->x86_phys_bits = 32; | |
| c->x86_virt_bits = 32; | |
| #endif | |
| c->x86_cache_alignment = c->x86_clflush_size; | |
| memset(&c->x86_capability, 0, sizeof c->x86_capability); | |
| c->extended_cpuid_level = 0; | |
| if (!have_cpuid_p()) | |
| identify_cpu_without_cpuid(c); | |
| /* cyrix could have cpuid enabled via c_identify()*/ | |
| if (!have_cpuid_p()) | |
| return; | |
| cpu_detect(c); | |
| get_cpu_vendor(c); | |
| get_cpu_cap(c); | |
| if (this_cpu->c_early_init) | |
| this_cpu->c_early_init(c); | |
| #ifdef CONFIG_SMP | |
| c->cpu_index = 0; | |
| #endif | |
| filter_cpuid_features(c, false); | |
| setup_smep(c); | |
| } | |
| void __init early_cpu_init(void) | |
| { | |
| const struct cpu_dev *const *cdev; | |
| int count = 0; | |
| #ifdef CONFIG_PROCESSOR_SELECT | |
| printk(KERN_INFO "KERNEL supported cpus:\n"); | |
| #endif | |
| for (cdev = __x86_cpu_dev_start; cdev < __x86_cpu_dev_end; cdev++) { | |
| const struct cpu_dev *cpudev = *cdev; | |
| if (count >= X86_VENDOR_NUM) | |
| break; | |
| cpu_devs[count] = cpudev; | |
| count++; | |
| #ifdef CONFIG_PROCESSOR_SELECT | |
| { | |
| unsigned int j; | |
| for (j = 0; j < 2; j++) { | |
| if (!cpudev->c_ident[j]) | |
| continue; | |
| printk(KERN_INFO " %s %s\n", cpudev->c_vendor, | |
| cpudev->c_ident[j]); | |
| } | |
| } | |
| #endif | |
| } | |
| early_identify_cpu(&boot_cpu_data); | |
| } | |
| /* | |
| * The NOPL instruction is supposed to exist on all CPUs of family >= 6; | |
| * unfortunately, that's not true in practice because of early VIA | |
| * chips and (more importantly) broken virtualizers that are not easy | |
| * to detect. In the latter case it doesn't even *fail* reliably, so | |
| * probing for it doesn't even work. Disable it completely on 32-bit | |
| * unless we can find a reliable way to detect all the broken cases. | |
| * Enable it explicitly on 64-bit for non-constant inputs of cpu_has(). | |
| */ | |
| static void __cpuinit detect_nopl(struct cpuinfo_x86 *c) | |
| { | |
| #ifdef CONFIG_X86_32 | |
| clear_cpu_cap(c, X86_FEATURE_NOPL); | |
| #else | |
| set_cpu_cap(c, X86_FEATURE_NOPL); | |
| #endif | |
| } | |
| static void __cpuinit generic_identify(struct cpuinfo_x86 *c) | |
| { | |
| c->extended_cpuid_level = 0; | |
| if (!have_cpuid_p()) | |
| identify_cpu_without_cpuid(c); | |
| /* cyrix could have cpuid enabled via c_identify()*/ | |
| if (!have_cpuid_p()) | |
| return; | |
| cpu_detect(c); | |
| get_cpu_vendor(c); | |
| get_cpu_cap(c); | |
| if (c->cpuid_level >= 0x00000001) { | |
| c->initial_apicid = (cpuid_ebx(1) >> 24) & 0xFF; | |
| #ifdef CONFIG_X86_32 | |
| # ifdef CONFIG_X86_HT | |
| c->apicid = apic->phys_pkg_id(c->initial_apicid, 0); | |
| # else | |
| c->apicid = c->initial_apicid; | |
| # endif | |
| #endif | |
| #ifdef CONFIG_X86_HT | |
| c->phys_proc_id = c->initial_apicid; | |
| #endif | |
| } | |
| setup_smep(c); | |
| get_model_name(c); /* Default name */ | |
| detect_nopl(c); | |
| } | |
| /* | |
| * This does the hard work of actually picking apart the CPU stuff... | |
| */ | |
| static void __cpuinit identify_cpu(struct cpuinfo_x86 *c) | |
| { | |
| int i; | |
| c->loops_per_jiffy = loops_per_jiffy; | |
| c->x86_cache_size = -1; | |
| c->x86_vendor = X86_VENDOR_UNKNOWN; | |
| c->x86_model = c->x86_mask = 0; /* So far unknown... */ | |
| c->x86_vendor_id[0] = '\0'; /* Unset */ | |
| c->x86_model_id[0] = '\0'; /* Unset */ | |
| c->x86_max_cores = 1; | |
| c->x86_coreid_bits = 0; | |
| #ifdef CONFIG_X86_64 | |
| c->x86_clflush_size = 64; | |
| c->x86_phys_bits = 36; | |
| c->x86_virt_bits = 48; | |
| #else | |
| c->cpuid_level = -1; /* CPUID not detected */ | |
| c->x86_clflush_size = 32; | |
| c->x86_phys_bits = 32; | |
| c->x86_virt_bits = 32; | |
| #endif | |
| c->x86_cache_alignment = c->x86_clflush_size; | |
| memset(&c->x86_capability, 0, sizeof c->x86_capability); | |
| generic_identify(c); | |
| if (this_cpu->c_identify) | |
| this_cpu->c_identify(c); | |
| /* Clear/Set all flags overriden by options, after probe */ | |
| for (i = 0; i < NCAPINTS; i++) { | |
| c->x86_capability[i] &= ~cpu_caps_cleared[i]; | |
| c->x86_capability[i] |= cpu_caps_set[i]; | |
| } | |
| #ifdef CONFIG_X86_64 | |
| c->apicid = apic->phys_pkg_id(c->initial_apicid, 0); | |
| #endif | |
| /* | |
| * Vendor-specific initialization. In this section we | |
| * canonicalize the feature flags, meaning if there are | |
| * features a certain CPU supports which CPUID doesn't | |
| * tell us, CPUID claiming incorrect flags, or other bugs, | |
| * we handle them here. | |
| * | |
| * At the end of this section, c->x86_capability better | |
| * indicate the features this CPU genuinely supports! | |
| */ | |
| if (this_cpu->c_init) | |
| this_cpu->c_init(c); | |
| /* Disable the PN if appropriate */ | |
| squash_the_stupid_serial_number(c); | |
| /* | |
| * The vendor-specific functions might have changed features. | |
| * Now we do "generic changes." | |
| */ | |
| /* Filter out anything that depends on CPUID levels we don't have */ | |
| filter_cpuid_features(c, true); | |
| /* If the model name is still unset, do table lookup. */ | |
| if (!c->x86_model_id[0]) { | |
| const char *p; | |
| p = table_lookup_model(c); | |
| if (p) | |
| strcpy(c->x86_model_id, p); | |
| else | |
| /* Last resort... */ | |
| sprintf(c->x86_model_id, "%02x/%02x", | |
| c->x86, c->x86_model); | |
| } | |
| #ifdef CONFIG_X86_64 | |
| detect_ht(c); | |
| #endif | |
| init_hypervisor(c); | |
| /* | |
| * Clear/Set all flags overriden by options, need do it | |
| * before following smp all cpus cap AND. | |
| */ | |
| for (i = 0; i < NCAPINTS; i++) { | |
| c->x86_capability[i] &= ~cpu_caps_cleared[i]; | |
| c->x86_capability[i] |= cpu_caps_set[i]; | |
| } | |
| /* | |
| * On SMP, boot_cpu_data holds the common feature set between | |
| * all CPUs; so make sure that we indicate which features are | |
| * common between the CPUs. The first time this routine gets | |
| * executed, c == &boot_cpu_data. | |
| */ | |
| if (c != &boot_cpu_data) { | |
| /* AND the already accumulated flags with these */ | |
| for (i = 0; i < NCAPINTS; i++) | |
| boot_cpu_data.x86_capability[i] &= c->x86_capability[i]; | |
| } | |
| /* Init Machine Check Exception if available. */ | |
| mcheck_cpu_init(c); | |
| select_idle_routine(c); | |
| #ifdef CONFIG_NUMA | |
| numa_add_cpu(smp_processor_id()); | |
| #endif | |
| } | |
| #ifdef CONFIG_X86_64 | |
| static void vgetcpu_set_mode(void) | |
| { | |
| if (cpu_has(&boot_cpu_data, X86_FEATURE_RDTSCP)) | |
| vgetcpu_mode = VGETCPU_RDTSCP; | |
| else | |
| vgetcpu_mode = VGETCPU_LSL; | |
| } | |
| #endif | |
| void __init identify_boot_cpu(void) | |
| { | |
| identify_cpu(&boot_cpu_data); | |
| init_amd_e400_c1e_mask(); | |
| #ifdef CONFIG_X86_32 | |
| sysenter_setup(); | |
| enable_sep_cpu(); | |
| #else | |
| vgetcpu_set_mode(); | |
| #endif | |
| } | |
| void __cpuinit identify_secondary_cpu(struct cpuinfo_x86 *c) | |
| { | |
| BUG_ON(c == &boot_cpu_data); | |
| identify_cpu(c); | |
| #ifdef CONFIG_X86_32 | |
| enable_sep_cpu(); | |
| #endif | |
| mtrr_ap_init(); | |
| } | |
| struct msr_range { | |
| unsigned min; | |
| unsigned max; | |
| }; | |
| static const struct msr_range msr_range_array[] __cpuinitconst = { | |
| { 0x00000000, 0x00000418}, | |
| { 0xc0000000, 0xc000040b}, | |
| { 0xc0010000, 0xc0010142}, | |
| { 0xc0011000, 0xc001103b}, | |
| }; | |
| static void __cpuinit print_cpu_msr(void) | |
| { | |
| unsigned index_min, index_max; | |
| unsigned index; | |
| u64 val; | |
| int i; | |
| for (i = 0; i < ARRAY_SIZE(msr_range_array); i++) { | |
| index_min = msr_range_array[i].min; | |
| index_max = msr_range_array[i].max; | |
| for (index = index_min; index < index_max; index++) { | |
| if (rdmsrl_amd_safe(index, &val)) | |
| continue; | |
| printk(KERN_INFO " MSR%08x: %016llx\n", index, val); | |
| } | |
| } | |
| } | |
| static int show_msr __cpuinitdata; | |
| static __init int setup_show_msr(char *arg) | |
| { | |
| int num; | |
| get_option(&arg, &num); | |
| if (num > 0) | |
| show_msr = num; | |
| return 1; | |
| } | |
| __setup("show_msr=", setup_show_msr); | |
| static __init int setup_noclflush(char *arg) | |
| { | |
| setup_clear_cpu_cap(X86_FEATURE_CLFLSH); | |
| return 1; | |
| } | |
| __setup("noclflush", setup_noclflush); | |
| void __cpuinit print_cpu_info(struct cpuinfo_x86 *c) | |
| { | |
| const char *vendor = NULL; | |
| if (c->x86_vendor < X86_VENDOR_NUM) { | |
| vendor = this_cpu->c_vendor; | |
| } else { | |
| if (c->cpuid_level >= 0) | |
| vendor = c->x86_vendor_id; | |
| } | |
| if (vendor && !strstr(c->x86_model_id, vendor)) | |
| printk(KERN_CONT "%s ", vendor); | |
| if (c->x86_model_id[0]) | |
| printk(KERN_CONT "%s", c->x86_model_id); | |
| else | |
| printk(KERN_CONT "%d86", c->x86); | |
| if (c->x86_mask || c->cpuid_level >= 0) | |
| printk(KERN_CONT " stepping %02x\n", c->x86_mask); | |
| else | |
| printk(KERN_CONT "\n"); | |
| #ifdef CONFIG_SMP | |
| if (c->cpu_index < show_msr) | |
| print_cpu_msr(); | |
| #else | |
| if (show_msr) | |
| print_cpu_msr(); | |
| #endif | |
| } | |
| static __init int setup_disablecpuid(char *arg) | |
| { | |
| int bit; | |
| if (get_option(&arg, &bit) && bit < NCAPINTS*32) | |
| setup_clear_cpu_cap(bit); | |
| else | |
| return 0; | |
| return 1; | |
| } | |
| __setup("clearcpuid=", setup_disablecpuid); | |
| #ifdef CONFIG_X86_64 | |
| struct desc_ptr idt_descr = { NR_VECTORS * 16 - 1, (unsigned long) idt_table }; | |
| DEFINE_PER_CPU_FIRST(union irq_stack_union, | |
| irq_stack_union) __aligned(PAGE_SIZE); | |
| /* | |
| * The following four percpu variables are hot. Align current_task to | |
| * cacheline size such that all four fall in the same cacheline. | |
| */ | |
| DEFINE_PER_CPU(struct task_struct *, current_task) ____cacheline_aligned = | |
| &init_task; | |
| EXPORT_PER_CPU_SYMBOL(current_task); | |
| DEFINE_PER_CPU(unsigned long, kernel_stack) = | |
| (unsigned long)&init_thread_union - KERNEL_STACK_OFFSET + THREAD_SIZE; | |
| EXPORT_PER_CPU_SYMBOL(kernel_stack); | |
| DEFINE_PER_CPU(char *, irq_stack_ptr) = | |
| init_per_cpu_var(irq_stack_union.irq_stack) + IRQ_STACK_SIZE - 64; | |
| DEFINE_PER_CPU(unsigned int, irq_count) = -1; | |
| /* | |
| * Special IST stacks which the CPU switches to when it calls | |
| * an IST-marked descriptor entry. Up to 7 stacks (hardware | |
| * limit), all of them are 4K, except the debug stack which | |
| * is 8K. | |
| */ | |
| static const unsigned int exception_stack_sizes[N_EXCEPTION_STACKS] = { | |
| [0 ... N_EXCEPTION_STACKS - 1] = EXCEPTION_STKSZ, | |
| [DEBUG_STACK - 1] = DEBUG_STKSZ | |
| }; | |
| static DEFINE_PER_CPU_PAGE_ALIGNED(char, exception_stacks | |
| [(N_EXCEPTION_STACKS - 1) * EXCEPTION_STKSZ + DEBUG_STKSZ]); | |
| /* May not be marked __init: used by software suspend */ | |
| void syscall_init(void) | |
| { | |
| /* | |
| * LSTAR and STAR live in a bit strange symbiosis. | |
| * They both write to the same internal register. STAR allows to | |
| * set CS/DS but only a 32bit target. LSTAR sets the 64bit rip. | |
| */ | |
| wrmsrl(MSR_STAR, ((u64)__USER32_CS)<<48 | ((u64)__KERNEL_CS)<<32); | |
| wrmsrl(MSR_LSTAR, system_call); | |
| wrmsrl(MSR_CSTAR, ignore_sysret); | |
| #ifdef CONFIG_IA32_EMULATION | |
| syscall32_cpu_init(); | |
| #endif | |
| /* Flags to clear on syscall */ | |
| wrmsrl(MSR_SYSCALL_MASK, | |
| X86_EFLAGS_TF|X86_EFLAGS_DF|X86_EFLAGS_IF|X86_EFLAGS_IOPL); | |
| } | |
| unsigned long kernel_eflags; | |
| /* | |
| * Copies of the original ist values from the tss are only accessed during | |
| * debugging, no special alignment required. | |
| */ | |
| DEFINE_PER_CPU(struct orig_ist, orig_ist); | |
| #else /* CONFIG_X86_64 */ | |
| DEFINE_PER_CPU(struct task_struct *, current_task) = &init_task; | |
| EXPORT_PER_CPU_SYMBOL(current_task); | |
| #ifdef CONFIG_CC_STACKPROTECTOR | |
| DEFINE_PER_CPU_ALIGNED(struct stack_canary, stack_canary); | |
| #endif | |
| /* Make sure %fs and %gs are initialized properly in idle threads */ | |
| struct pt_regs * __cpuinit idle_regs(struct pt_regs *regs) | |
| { | |
| memset(regs, 0, sizeof(struct pt_regs)); | |
| regs->fs = __KERNEL_PERCPU; | |
| regs->gs = __KERNEL_STACK_CANARY; | |
| return regs; | |
| } | |
| #endif /* CONFIG_X86_64 */ | |
| /* | |
| * Clear all 6 debug registers: | |
| */ | |
| static void clear_all_debug_regs(void) | |
| { | |
| int i; | |
| for (i = 0; i < 8; i++) { | |
| /* Ignore db4, db5 */ | |
| if ((i == 4) || (i == 5)) | |
| continue; | |
| set_debugreg(0, i); | |
| } | |
| } | |
| #ifdef CONFIG_KGDB | |
| /* | |
| * Restore debug regs if using kgdbwait and you have a kernel debugger | |
| * connection established. | |
| */ | |
| static void dbg_restore_debug_regs(void) | |
| { | |
| if (unlikely(kgdb_connected && arch_kgdb_ops.correct_hw_break)) | |
| arch_kgdb_ops.correct_hw_break(); | |
| } | |
| #else /* ! CONFIG_KGDB */ | |
| #define dbg_restore_debug_regs() | |
| #endif /* ! CONFIG_KGDB */ | |
| /* | |
| * cpu_init() initializes state that is per-CPU. Some data is already | |
| * initialized (naturally) in the bootstrap process, such as the GDT | |
| * and IDT. We reload them nevertheless, this function acts as a | |
| * 'CPU state barrier', nothing should get across. | |
| * A lot of state is already set up in PDA init for 64 bit | |
| */ | |
| #ifdef CONFIG_X86_64 | |
| void __cpuinit cpu_init(void) | |
| { | |
| struct orig_ist *oist; | |
| struct task_struct *me; | |
| struct tss_struct *t; | |
| unsigned long v; | |
| int cpu; | |
| int i; | |
| cpu = stack_smp_processor_id(); | |
| t = &per_cpu(init_tss, cpu); | |
| oist = &per_cpu(orig_ist, cpu); | |
| #ifdef CONFIG_NUMA | |
| if (cpu != 0 && percpu_read(numa_node) == 0 && | |
| early_cpu_to_node(cpu) != NUMA_NO_NODE) | |
| set_numa_node(early_cpu_to_node(cpu)); | |
| #endif | |
| me = current; | |
| if (cpumask_test_and_set_cpu(cpu, cpu_initialized_mask)) | |
| panic("CPU#%d already initialized!\n", cpu); | |
| pr_debug("Initializing CPU#%d\n", cpu); | |
| clear_in_cr4(X86_CR4_VME|X86_CR4_PVI|X86_CR4_TSD|X86_CR4_DE); | |
| /* | |
| * Initialize the per-CPU GDT with the boot GDT, | |
| * and set up the GDT descriptor: | |
| */ | |
| switch_to_new_gdt(cpu); | |
| loadsegment(fs, 0); | |
| load_idt((const struct desc_ptr *)&idt_descr); | |
| memset(me->thread.tls_array, 0, GDT_ENTRY_TLS_ENTRIES * 8); | |
| syscall_init(); | |
| wrmsrl(MSR_FS_BASE, 0); | |
| wrmsrl(MSR_KERNEL_GS_BASE, 0); | |
| barrier(); | |
| x86_configure_nx(); | |
| if (cpu != 0) | |
| enable_x2apic(); | |
| /* | |
| * set up and load the per-CPU TSS | |
| */ | |
| if (!oist->ist[0]) { | |
| char *estacks = per_cpu(exception_stacks, cpu); | |
| for (v = 0; v < N_EXCEPTION_STACKS; v++) { | |
| estacks += exception_stack_sizes[v]; | |
| oist->ist[v] = t->x86_tss.ist[v] = | |
| (unsigned long)estacks; | |
| } | |
| } | |
| t->x86_tss.io_bitmap_base = offsetof(struct tss_struct, io_bitmap); | |
| /* | |
| * <= is required because the CPU will access up to | |
| * 8 bits beyond the end of the IO permission bitmap. | |
| */ | |
| for (i = 0; i <= IO_BITMAP_LONGS; i++) | |
| t->io_bitmap[i] = ~0UL; | |
| atomic_inc(&init_mm.mm_count); | |
| me->active_mm = &init_mm; | |
| BUG_ON(me->mm); | |
| enter_lazy_tlb(&init_mm, me); | |
| load_sp0(t, ¤t->thread); | |
| set_tss_desc(cpu, t); | |
| load_TR_desc(); | |
| load_LDT(&init_mm.context); | |
| clear_all_debug_regs(); | |
| dbg_restore_debug_regs(); | |
| fpu_init(); | |
| xsave_init(); | |
| raw_local_save_flags(kernel_eflags); | |
| if (is_uv_system()) | |
| uv_cpu_init(); | |
| } | |
| #else | |
| void __cpuinit cpu_init(void) | |
| { | |
| int cpu = smp_processor_id(); | |
| struct task_struct *curr = current; | |
| struct tss_struct *t = &per_cpu(init_tss, cpu); | |
| struct thread_struct *thread = &curr->thread; | |
| if (cpumask_test_and_set_cpu(cpu, cpu_initialized_mask)) { | |
| printk(KERN_WARNING "CPU#%d already initialized!\n", cpu); | |
| for (;;) | |
| local_irq_enable(); | |
| } | |
| printk(KERN_INFO "Initializing CPU#%d\n", cpu); | |
| if (cpu_has_vme || cpu_has_tsc || cpu_has_de) | |
| clear_in_cr4(X86_CR4_VME|X86_CR4_PVI|X86_CR4_TSD|X86_CR4_DE); | |
| load_idt(&idt_descr); | |
| switch_to_new_gdt(cpu); | |
| /* | |
| * Set up and load the per-CPU TSS and LDT | |
| */ | |
| atomic_inc(&init_mm.mm_count); | |
| curr->active_mm = &init_mm; | |
| BUG_ON(curr->mm); | |
| enter_lazy_tlb(&init_mm, curr); | |
| load_sp0(t, thread); | |
| set_tss_desc(cpu, t); | |
| load_TR_desc(); | |
| load_LDT(&init_mm.context); | |
| t->x86_tss.io_bitmap_base = offsetof(struct tss_struct, io_bitmap); | |
| #ifdef CONFIG_DOUBLEFAULT | |
| /* Set up doublefault TSS pointer in the GDT */ | |
| __set_tss_desc(cpu, GDT_ENTRY_DOUBLEFAULT_TSS, &doublefault_tss); | |
| #endif | |
| clear_all_debug_regs(); | |
| dbg_restore_debug_regs(); | |
| fpu_init(); | |
| xsave_init(); | |
| } | |
| #endif |