| /* | |
| * SuperH KGDB support | |
| * | |
| * Copyright (C) 2008 - 2009 Paul Mundt | |
| * | |
| * Single stepping taken from the old stub by Henry Bell and Jeremy Siegel. | |
| * | |
| * This file is subject to the terms and conditions of the GNU General Public | |
| * License. See the file "COPYING" in the main directory of this archive | |
| * for more details. | |
| */ | |
| #include <linux/kgdb.h> | |
| #include <linux/kdebug.h> | |
| #include <linux/irq.h> | |
| #include <linux/io.h> | |
| #include <asm/cacheflush.h> | |
| /* Macros for single step instruction identification */ | |
| #define OPCODE_BT(op) (((op) & 0xff00) == 0x8900) | |
| #define OPCODE_BF(op) (((op) & 0xff00) == 0x8b00) | |
| #define OPCODE_BTF_DISP(op) (((op) & 0x80) ? (((op) | 0xffffff80) << 1) : \ | |
| (((op) & 0x7f ) << 1)) | |
| #define OPCODE_BFS(op) (((op) & 0xff00) == 0x8f00) | |
| #define OPCODE_BTS(op) (((op) & 0xff00) == 0x8d00) | |
| #define OPCODE_BRA(op) (((op) & 0xf000) == 0xa000) | |
| #define OPCODE_BRA_DISP(op) (((op) & 0x800) ? (((op) | 0xfffff800) << 1) : \ | |
| (((op) & 0x7ff) << 1)) | |
| #define OPCODE_BRAF(op) (((op) & 0xf0ff) == 0x0023) | |
| #define OPCODE_BRAF_REG(op) (((op) & 0x0f00) >> 8) | |
| #define OPCODE_BSR(op) (((op) & 0xf000) == 0xb000) | |
| #define OPCODE_BSR_DISP(op) (((op) & 0x800) ? (((op) | 0xfffff800) << 1) : \ | |
| (((op) & 0x7ff) << 1)) | |
| #define OPCODE_BSRF(op) (((op) & 0xf0ff) == 0x0003) | |
| #define OPCODE_BSRF_REG(op) (((op) >> 8) & 0xf) | |
| #define OPCODE_JMP(op) (((op) & 0xf0ff) == 0x402b) | |
| #define OPCODE_JMP_REG(op) (((op) >> 8) & 0xf) | |
| #define OPCODE_JSR(op) (((op) & 0xf0ff) == 0x400b) | |
| #define OPCODE_JSR_REG(op) (((op) >> 8) & 0xf) | |
| #define OPCODE_RTS(op) ((op) == 0xb) | |
| #define OPCODE_RTE(op) ((op) == 0x2b) | |
| #define SR_T_BIT_MASK 0x1 | |
| #define STEP_OPCODE 0xc33d | |
| /* Calculate the new address for after a step */ | |
| static short *get_step_address(struct pt_regs *linux_regs) | |
| { | |
| insn_size_t op = __raw_readw(linux_regs->pc); | |
| long addr; | |
| /* BT */ | |
| if (OPCODE_BT(op)) { | |
| if (linux_regs->sr & SR_T_BIT_MASK) | |
| addr = linux_regs->pc + 4 + OPCODE_BTF_DISP(op); | |
| else | |
| addr = linux_regs->pc + 2; | |
| } | |
| /* BTS */ | |
| else if (OPCODE_BTS(op)) { | |
| if (linux_regs->sr & SR_T_BIT_MASK) | |
| addr = linux_regs->pc + 4 + OPCODE_BTF_DISP(op); | |
| else | |
| addr = linux_regs->pc + 4; /* Not in delay slot */ | |
| } | |
| /* BF */ | |
| else if (OPCODE_BF(op)) { | |
| if (!(linux_regs->sr & SR_T_BIT_MASK)) | |
| addr = linux_regs->pc + 4 + OPCODE_BTF_DISP(op); | |
| else | |
| addr = linux_regs->pc + 2; | |
| } | |
| /* BFS */ | |
| else if (OPCODE_BFS(op)) { | |
| if (!(linux_regs->sr & SR_T_BIT_MASK)) | |
| addr = linux_regs->pc + 4 + OPCODE_BTF_DISP(op); | |
| else | |
| addr = linux_regs->pc + 4; /* Not in delay slot */ | |
| } | |
| /* BRA */ | |
| else if (OPCODE_BRA(op)) | |
| addr = linux_regs->pc + 4 + OPCODE_BRA_DISP(op); | |
| /* BRAF */ | |
| else if (OPCODE_BRAF(op)) | |
| addr = linux_regs->pc + 4 | |
| + linux_regs->regs[OPCODE_BRAF_REG(op)]; | |
| /* BSR */ | |
| else if (OPCODE_BSR(op)) | |
| addr = linux_regs->pc + 4 + OPCODE_BSR_DISP(op); | |
| /* BSRF */ | |
| else if (OPCODE_BSRF(op)) | |
| addr = linux_regs->pc + 4 | |
| + linux_regs->regs[OPCODE_BSRF_REG(op)]; | |
| /* JMP */ | |
| else if (OPCODE_JMP(op)) | |
| addr = linux_regs->regs[OPCODE_JMP_REG(op)]; | |
| /* JSR */ | |
| else if (OPCODE_JSR(op)) | |
| addr = linux_regs->regs[OPCODE_JSR_REG(op)]; | |
| /* RTS */ | |
| else if (OPCODE_RTS(op)) | |
| addr = linux_regs->pr; | |
| /* RTE */ | |
| else if (OPCODE_RTE(op)) | |
| addr = linux_regs->regs[15]; | |
| /* Other */ | |
| else | |
| addr = linux_regs->pc + instruction_size(op); | |
| flush_icache_range(addr, addr + instruction_size(op)); | |
| return (short *)addr; | |
| } | |
| /* | |
| * Replace the instruction immediately after the current instruction | |
| * (i.e. next in the expected flow of control) with a trap instruction, | |
| * so that returning will cause only a single instruction to be executed. | |
| * Note that this model is slightly broken for instructions with delay | |
| * slots (e.g. B[TF]S, BSR, BRA etc), where both the branch and the | |
| * instruction in the delay slot will be executed. | |
| */ | |
| static unsigned long stepped_address; | |
| static insn_size_t stepped_opcode; | |
| static void do_single_step(struct pt_regs *linux_regs) | |
| { | |
| /* Determine where the target instruction will send us to */ | |
| unsigned short *addr = get_step_address(linux_regs); | |
| stepped_address = (int)addr; | |
| /* Replace it */ | |
| stepped_opcode = __raw_readw((long)addr); | |
| *addr = STEP_OPCODE; | |
| /* Flush and return */ | |
| flush_icache_range((long)addr, (long)addr + | |
| instruction_size(stepped_opcode)); | |
| } | |
| /* Undo a single step */ | |
| static void undo_single_step(struct pt_regs *linux_regs) | |
| { | |
| /* If we have stepped, put back the old instruction */ | |
| /* Use stepped_address in case we stopped elsewhere */ | |
| if (stepped_opcode != 0) { | |
| __raw_writew(stepped_opcode, stepped_address); | |
| flush_icache_range(stepped_address, stepped_address + 2); | |
| } | |
| stepped_opcode = 0; | |
| } | |
| void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs) | |
| { | |
| int i; | |
| for (i = 0; i < 16; i++) | |
| gdb_regs[GDB_R0 + i] = regs->regs[i]; | |
| gdb_regs[GDB_PC] = regs->pc; | |
| gdb_regs[GDB_PR] = regs->pr; | |
| gdb_regs[GDB_SR] = regs->sr; | |
| gdb_regs[GDB_GBR] = regs->gbr; | |
| gdb_regs[GDB_MACH] = regs->mach; | |
| gdb_regs[GDB_MACL] = regs->macl; | |
| __asm__ __volatile__ ("stc vbr, %0" : "=r" (gdb_regs[GDB_VBR])); | |
| } | |
| void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *regs) | |
| { | |
| int i; | |
| for (i = 0; i < 16; i++) | |
| regs->regs[GDB_R0 + i] = gdb_regs[GDB_R0 + i]; | |
| regs->pc = gdb_regs[GDB_PC]; | |
| regs->pr = gdb_regs[GDB_PR]; | |
| regs->sr = gdb_regs[GDB_SR]; | |
| regs->gbr = gdb_regs[GDB_GBR]; | |
| regs->mach = gdb_regs[GDB_MACH]; | |
| regs->macl = gdb_regs[GDB_MACL]; | |
| } | |
| void sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *p) | |
| { | |
| gdb_regs[GDB_R15] = p->thread.sp; | |
| gdb_regs[GDB_PC] = p->thread.pc; | |
| } | |
| int kgdb_arch_handle_exception(int e_vector, int signo, int err_code, | |
| char *remcomInBuffer, char *remcomOutBuffer, | |
| struct pt_regs *linux_regs) | |
| { | |
| unsigned long addr; | |
| char *ptr; | |
| /* Undo any stepping we may have done */ | |
| undo_single_step(linux_regs); | |
| switch (remcomInBuffer[0]) { | |
| case 'c': | |
| case 's': | |
| /* try to read optional parameter, pc unchanged if no parm */ | |
| ptr = &remcomInBuffer[1]; | |
| if (kgdb_hex2long(&ptr, &addr)) | |
| linux_regs->pc = addr; | |
| case 'D': | |
| case 'k': | |
| atomic_set(&kgdb_cpu_doing_single_step, -1); | |
| if (remcomInBuffer[0] == 's') { | |
| do_single_step(linux_regs); | |
| kgdb_single_step = 1; | |
| atomic_set(&kgdb_cpu_doing_single_step, | |
| raw_smp_processor_id()); | |
| } | |
| return 0; | |
| } | |
| /* this means that we do not want to exit from the handler: */ | |
| return -1; | |
| } | |
| unsigned long kgdb_arch_pc(int exception, struct pt_regs *regs) | |
| { | |
| if (exception == 60) | |
| return instruction_pointer(regs) - 2; | |
| return instruction_pointer(regs); | |
| } | |
| void kgdb_arch_set_pc(struct pt_regs *regs, unsigned long ip) | |
| { | |
| regs->pc = ip; | |
| } | |
| /* | |
| * The primary entry points for the kgdb debug trap table entries. | |
| */ | |
| BUILD_TRAP_HANDLER(singlestep) | |
| { | |
| unsigned long flags; | |
| TRAP_HANDLER_DECL; | |
| local_irq_save(flags); | |
| regs->pc -= instruction_size(__raw_readw(regs->pc - 4)); | |
| kgdb_handle_exception(0, SIGTRAP, 0, regs); | |
| local_irq_restore(flags); | |
| } | |
| static int __kgdb_notify(struct die_args *args, unsigned long cmd) | |
| { | |
| int ret; | |
| switch (cmd) { | |
| case DIE_BREAKPOINT: | |
| /* | |
| * This means a user thread is single stepping | |
| * a system call which should be ignored | |
| */ | |
| if (test_thread_flag(TIF_SINGLESTEP)) | |
| return NOTIFY_DONE; | |
| ret = kgdb_handle_exception(args->trapnr & 0xff, args->signr, | |
| args->err, args->regs); | |
| if (ret) | |
| return NOTIFY_DONE; | |
| break; | |
| } | |
| return NOTIFY_STOP; | |
| } | |
| static int | |
| kgdb_notify(struct notifier_block *self, unsigned long cmd, void *ptr) | |
| { | |
| unsigned long flags; | |
| int ret; | |
| local_irq_save(flags); | |
| ret = __kgdb_notify(ptr, cmd); | |
| local_irq_restore(flags); | |
| return ret; | |
| } | |
| static struct notifier_block kgdb_notifier = { | |
| .notifier_call = kgdb_notify, | |
| /* | |
| * Lowest-prio notifier priority, we want to be notified last: | |
| */ | |
| .priority = -INT_MAX, | |
| }; | |
| int kgdb_arch_init(void) | |
| { | |
| return register_die_notifier(&kgdb_notifier); | |
| } | |
| void kgdb_arch_exit(void) | |
| { | |
| unregister_die_notifier(&kgdb_notifier); | |
| } | |
| struct kgdb_arch arch_kgdb_ops = { | |
| /* Breakpoint instruction: trapa #0x3c */ | |
| #ifdef CONFIG_CPU_LITTLE_ENDIAN | |
| .gdb_bpt_instr = { 0x3c, 0xc3 }, | |
| #else | |
| .gdb_bpt_instr = { 0xc3, 0x3c }, | |
| #endif | |
| }; |